Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Harmonisation of surveillance requirements and maintenance in a context of ageing and obsolescence based on reliability, availability and risk information

  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Carlos Alberola, Sofía|||0000-0002-0637-325X
[EN] This paper contains the fundamentals and a comparison of different alternatives in the context of risk-informed surveillance requirements that consider the full effects of implementing the maintenance rule. A case study is included to demonstrate the performance of the different alternatives, which focus on a motor-operated valve and make use of an Ageing PRA to quantify the effect of component ageing, test and maintenance effectiveness on equipment RAM and its impact on risk. The results show that the alternative that simultaneously harmonises surveillance requirements and maintenance activities provides the best results in terms of RAM and risk in a context of equipment ageing and obsolescence. However, they also show that measures other than simply readjusting surveillance testing and maintenance intervals should be explored in case of technical obsolescence, as this has a strong impact on maintenance effectiveness, which may require, for example, an obsolescence management program to be applied., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Project ENE2016-80401-R) and the Doctoral Scholarship awarded (BES-2014067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter Estimation of a Reliability Model of Demand-Caused and Standby-Related Failures of Safety Components Exposed to Degradation by Demand Stress and Ageing That Undergo Imperfect Maintenance

  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Martorell-Aygues, Pablo
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Mullor, Ruben
[EN] One can find many reliability, availability, and maintainability (RAM) models proposed in the literature. However, such models become more complex day after day, as there is an attempt to capture equipment performance in a more realistic way, such as, explicitly addressing the effect of component ageing and degradation, surveillance activities, and corrective and preventive maintenance policies. Then, there is a need to fit the best model to real data by estimating the model parameters using an appropriate tool. This problem is not easy to solve in some cases since the number of parameters is large and the available data is scarce. This paper considers two main failure models commonly adopted to represent the probability of failure on demand (PFD) of safety equipment: (1) by demand-caused and (2) standby-related failures. It proposes a maximum likelihood estimation (MLE) approach for parameter estimation of a reliability model of demand-caused and standby-related failures of safety components exposed to degradation by demand stress and ageing that undergo imperfect maintenance. The case study considers real failure, test, and maintenance data for a typical motor-operated valve in a nuclear power plant. The results of the parameters estimation and the adoption of the best model are discussed., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Project ENE2016-80401-R) and the doctoral scholarship awarded (BES-2014-067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of test and maintenance of ageing components consisting of multiple items and addressing effectiveness

  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Martorell-Aygues, Pablo
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Mullor, Rubén
[EN] There are many models in the literature that have been proposed in the last decades aimed at assessing the reliability, availability and maintainability (RAM) of safety equipment, many of them with a focus on their use to assess the risk level of a technological system or to search for appropriate design and/or surveillance and maintenance policies in order to assure that an optimum level of RAM of safety systems is kept during all the plant operational life. This paper proposes a new approach for RAM modelling that accounts for equipment ageing and maintenance and testing effectiveness of equipment consisting of multiple items in an integrated manner. This model is then used to perform the simultaneous optimization of testing and maintenance for ageing equipment consisting of multiple items. An example of application is provided, which considers a simplified High Pressure Injection System (HPIS) of a typical Power Water Reactor (PWR). Basically, this system consists of motor driven pumps (MDP) and motor operated valves (MOV), where both types of components consists of two items each. These components present different failure and cause modes and behaviours, and they also undertake complex test and maintenance activities depending on the item involved. The results of the example of application demonstrate that the optimization algorithm provide the best solutions when the optimization problem is formulated and solved considering full flexibility in the implementation of testing and maintenance activities taking part of such an integrated RAM model., Authors are grateful to the Spanish Ministry of Science and Innovation for the financial support of this work (research project ENE2013-45540-R) and the Doctoral fellow (BES-2011-043906 and BES-2014-067602).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of risk impact of Completion Time changes combining PSA and DSA model insight and human reliability analysis

  • Martorell-Aygues, Pablo
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Sanchez Saez, Francisco|||0000-0002-3011-9884
  • Saiz-Córdoba, Matilde
[EN] Although in risk screening of equipment structures, systems and components, changes can be accomplished directly using RG 1.174, a plant change may also include changes to human actions. Human reliability analysis is an integral part of probabilistic safety assessment modeling. Using best estimate codes can identify unknown accident sequences as well as quantify more realistic probabilities of human error. This paper proposes a three-step approach to evaluate the risk impact of changes to completion time within nuclear power plant technical specifications, using a probabilistic safety assessment model refined by a best-estimate safety analysis and human reliability analysis. A case study is presented focusing on a completion time change of the residual heat removal system of a nuclear power plant using a level 1 low power and shutdown probabilistic safety assessment. Thus, the application case shows that the change could be accepted from a risk viewpoint, in particular, because of the risk increase imposed by extending the completion time is partially compensated by the risk decrease due to the human error probability reduction since the stress level is reduced., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Projects ENE2013-45540-R and ENE2016-80401-R) and the doctoral scholarship awarded (BES-2014-067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unavailability model for demand-caused failures of safety components addressing degradation by demand-induced stress, maintenance effectiveness and test efficiency

  • Martorell-Aygues, Pablo
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
[EN] The reliability, availability and maintainability (RAM) modelling of safety equipment has long been a topic of major concern. Some RAM models have focused on explicitly addressing the effect of component degradation and surveillance and maintenance policies, searching for an optimum level of the safety component RAM by adjusting surveillance and maintenance related parameters. As regards the reliability contribution, these components normally have two main types of failure mode that contribute to the probability of failure on demand (PFD): (1) by demand-caused and (2) standby-related failures. The former is normally associated with a demand failure probability, which is affected by the degradation caused by demand-related stress. Surveillance testing therefore not only introduces a positive effect, but also an adverse one, which it compensates by performing maintenance activities to eliminate or reduce the accumulated degradation. This paper proposes a new model for the demand failure probability that explicitly addresses all aspects of the effect of demand-induced stress (mostly test-induced stress), maintenance effectiveness (PAS or PAR model) and test efficiency. A case study is included on an application to a typical motor-operated valve in a nuclear power plant., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Projects ENE2013-45540-R and ENE2016-80401-R) and the doctoral scholarship awarded (BES-2014-067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.