Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Harmonisation of surveillance requirements and maintenance in a context of ageing and obsolescence based on reliability, availability and risk information

  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Carlos Alberola, Sofía|||0000-0002-0637-325X
[EN] This paper contains the fundamentals and a comparison of different alternatives in the context of risk-informed surveillance requirements that consider the full effects of implementing the maintenance rule. A case study is included to demonstrate the performance of the different alternatives, which focus on a motor-operated valve and make use of an Ageing PRA to quantify the effect of component ageing, test and maintenance effectiveness on equipment RAM and its impact on risk. The results show that the alternative that simultaneously harmonises surveillance requirements and maintenance activities provides the best results in terms of RAM and risk in a context of equipment ageing and obsolescence. However, they also show that measures other than simply readjusting surveillance testing and maintenance intervals should be explored in case of technical obsolescence, as this has a strong impact on maintenance effectiveness, which may require, for example, an obsolescence management program to be applied., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Project ENE2016-80401-R) and the Doctoral Scholarship awarded (BES-2014067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter Estimation of a Reliability Model of Demand-Caused and Standby-Related Failures of Safety Components Exposed to Degradation by Demand Stress and Ageing That Undergo Imperfect Maintenance

  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Martorell-Aygues, Pablo
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Mullor, Ruben
[EN] One can find many reliability, availability, and maintainability (RAM) models proposed in the literature. However, such models become more complex day after day, as there is an attempt to capture equipment performance in a more realistic way, such as, explicitly addressing the effect of component ageing and degradation, surveillance activities, and corrective and preventive maintenance policies. Then, there is a need to fit the best model to real data by estimating the model parameters using an appropriate tool. This problem is not easy to solve in some cases since the number of parameters is large and the available data is scarce. This paper considers two main failure models commonly adopted to represent the probability of failure on demand (PFD) of safety equipment: (1) by demand-caused and (2) standby-related failures. It proposes a maximum likelihood estimation (MLE) approach for parameter estimation of a reliability model of demand-caused and standby-related failures of safety components exposed to degradation by demand stress and ageing that undergo imperfect maintenance. The case study considers real failure, test, and maintenance data for a typical motor-operated valve in a nuclear power plant. The results of the parameters estimation and the adoption of the best model are discussed., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Project ENE2016-80401-R) and the doctoral scholarship awarded (BES-2014-067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of test and maintenance of ageing components consisting of multiple items and addressing effectiveness

  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Martorell-Aygues, Pablo
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Mullor, Rubén
[EN] There are many models in the literature that have been proposed in the last decades aimed at assessing the reliability, availability and maintainability (RAM) of safety equipment, many of them with a focus on their use to assess the risk level of a technological system or to search for appropriate design and/or surveillance and maintenance policies in order to assure that an optimum level of RAM of safety systems is kept during all the plant operational life. This paper proposes a new approach for RAM modelling that accounts for equipment ageing and maintenance and testing effectiveness of equipment consisting of multiple items in an integrated manner. This model is then used to perform the simultaneous optimization of testing and maintenance for ageing equipment consisting of multiple items. An example of application is provided, which considers a simplified High Pressure Injection System (HPIS) of a typical Power Water Reactor (PWR). Basically, this system consists of motor driven pumps (MDP) and motor operated valves (MOV), where both types of components consists of two items each. These components present different failure and cause modes and behaviours, and they also undertake complex test and maintenance activities depending on the item involved. The results of the example of application demonstrate that the optimization algorithm provide the best solutions when the optimization problem is formulated and solved considering full flexibility in the implementation of testing and maintenance activities taking part of such an integrated RAM model., Authors are grateful to the Spanish Ministry of Science and Innovation for the financial support of this work (research project ENE2013-45540-R) and the Doctoral fellow (BES-2011-043906 and BES-2014-067602).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Optimización de soluciones de gestión de la obsolescencia en base al riesgo

  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Carlos Alberola, Sofía|||0000-0002-0637-325X
[ES] Este trabajo se centra en revisar el efecto de la obsolescencia técnica en los modelos actuales de RAMS, en un intento de explorar la viabilidad del uso de dichos modelos como parte de un conjunto de herramientas para analizar el impacto de la gestión de la obsolescencia en el contexto de toma de decisiones informada en el riesgo en las centrales nucleares. Se presenta un caso de aplicación para un componente de seguridad., El trabajo presentado forma parte de un Proyecto del Ministerio de Economía y Competitividad (ENE2016-80401-R) y de la tesis doctoral (BES-2014-067602). Además, este estudio ha recibido soporte de los Fondos FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Aportaciones al modelado de la indisponibilidad de componentes y la fiabilidad humana para la mejora de la seguridad de las centrales nucleares informada en el riesgo

  • Martorell-Aygues, Pablo
[ES] La seguridad ha sido, es y seguirá siendo una prioridad en la operación de las centrales nucleares para la producción de energía eléctrica. Uno de los grandes retos a los que se enfrenta la industria nuclear es el envejecimiento de las estructuras, sistemas y componentes (ESC) de seguridad. Actualmente, este hecho cobra especial relevancia porque un gran número de reactores está alcanzando el fin de su vida de diseño, debiendo afrontar próximamente una Revisión Periódica de Seguridad (RPS), que garantice el funcionamiento seguro de la central durante un periodo adicional denominado Opera-ción a Largo Plazo (OLP). El Análisis Probabilista de Seguridad (APS) es una herramienta fundamental para la gestión integral de la seguridad de una planta, tanto en el marco de la RPS como en la Toma de Decisiones Informada en el Riesgo (TDIR), siendo capaz de evaluar el incremento o disminución en el riesgo producido por un cambio determinado. Sin embargo, los modelos y datos actuales que lo integran no tienen en cuenta factores que influyen de forma determinante en el riesgo de una central. Por un lado, no tienen en cuenta el envejecimiento o la estrategia de pruebas y mantenimiento, en el caso del modelado de la fiabilidad e indisponibilidad de componentes. Por otro lado, no con-templan la imprecisión en el modelado de las acciones humanas, ni la inexactitud en la cuantificación de sus probabilidades de error. La presente tesis doctoral pretende actualizar y mejorar los modelos del APS, con vistas a su aplicación en el contexto de la RPS y de la TDIR. En este sentido, se establecen dos objetivos principales. En primer lugar, el desarrollo de un modelo RAM (fiabilidad, mantenibilidad y disponibilidad) dependiente del tiempo para componentes de seguridad, ajustado con datos reales de planta y con un nivel de detalle suficiente para recoger explícitamente en la edad del mismo, el efecto de las pruebas y el mantenimiento. En segundo lugar, mostrar las aplicaciones del APS para la TDIR. En primer término, se define un modelo de riesgo dependiente de la edad, a partir del mode-lo RAM previamente formulado, con el que seleccionar la mejor estrategia de pruebas y mantenimiento en un horizonte temporal dado. En segundo término, para mejorar el modelado del APS y la cuantificación de las probabilidades de error humano (PEH), se propone una metodología de evaluación de impacto en el riesgo para cambios en las acciones humanas y las Especificaciones Técnicas de Funcionamiento, que aprovecha los resultados del uso conjunto de los análisis de seguridad determinista y probabilista. Las aportaciones que conforman esta tesis doctoral se integran en la línea de investigación financiada por el Ministerio de Economía y Empresa en el proyecto ENE2016-80401-R, "Armonización de requisitos de vigilancia y mantenimiento en centrales nucleares con información en el riesgo" y la ayuda para contratos predoctorales para la formación de doctores BES-2014-067602., [CA] La seguretat ha sigut, és i continuarà sent una prioritat en l'operació de les centrals nuclears par a la producció d'energia elèctrica. Un del grans reptes als que s'enfronta la industria nuclear es l'envelliment de les estructures, sistemes i components de seguretat. Actualment, aquest fet té especial rellevància perquè un gran nombre de reactors està arribant a la fi de la seua vida de disseny, havent d'afrontar pròximament una Revisió Periòdica de Seguretat (RPS), que garantirà el funcionament segur de la central durant un període addicional conegut com Operació a Llarg Termini (OLP). L'Anàlisi Probabilista de Seguretat es una ferramenta fonamental per a la gestió integral de la seguretat d'una planta, tant en el marc de la RPS com en la presa de decisions informades en el risc (TDIR), sent capaç d'avaluar l'increment o disminució en el risc produït per un canvi determinat. No obstant això, els models i dades actuals que ho integren no tenen en compte factors que influeixen de forma determinant en el risc d'una central. Per una banda, no consideren l'envelliment o l'estratègia de proves i manteniment, en el cas del modelat de la fiabilitat i indisponiblitat de components. Per altra banda, no contemplen la imprecisió en el modelat de les acciones humanes, ni la inexactitud en la quantificació de la probabilitat d'error de les mateixes. La present tesi doctoral pretén actualitzar i millorar els models APS, amb la intenció d'aplicar-los en el context de la RPS y la TDIR. En aquest sentit, s'estableixen dos objectius principals. En primer lloc, el desenvolupament d'un model RAM (fiabilitat, mantenibilitat i disponibilitat) dependent del temps per a components de seguretat, ajustat amb dades reals de planta i amb un nivell de detall suficient per a recollir explícitament en l'edat del mateix, la política de proves i manteniment a la que es sotmès. En segon lloc, mostrar les aplicacions de l'APS per a la TDIR. En primer terme, es defineix un model de risc dependent de l'edat, a partir del model RAM prèviament formulat, amb el qual seleccionar la millor estratègia de proves i manteniment en un horitzó temporal determinat. En segon terme, per a millorar el modelat de l'APS i la quantificació de les probabilitats d'error humà (PEH), es proposa una metodologia d'avaluació d'impacte en el risc per a canvis en les accions humanes i en les Especificacions Tècniques de Funcionament, que aprofita els resultats de l'ús conjunt dels anàlisis determinista i probabilista. Les aportacions que formen part d'aquesta tesi doctoral s'integren en la línia d'investigació finançada pel Ministeri d'Economia i Empresa en el projecte ENE2016-80401-R, "Armonización de requisitos de vigilancia y mantenimiento en centrales nucleares con información en el riesgo" i l'ajuda per a contractes predoctorals per a la formació de doctors BES-2014-067602., [EN] Safety always has been and always will be a priority in nuclear power plant operation to generate electricity. One of the major challenges of nuclear industry is the ageing of safety-related structures, systems and components (SSC). Presently, this fact gains relevance due to several reactors are reaching their design life, having to conduct a Periodic Safety Review (PSR) that assures safety operation for an additional period better-known as Long Term Operation (LTO) Probabilistic Safety Assessment (PSA) is an essential tool in an integral NPP safety management, both PSR framework and Risk Informed Decision Making (RIDM), being able to evaluate a risk increase or decrease for any specific change on the plant. However, current PSA models and data do not consider factors, which have an impact in the overall risk of the plant. On the one hand, they do not take into account the effect of ageing nor maintenance and testing program, in the case of reliability and unavailability modelling. On the other hand, human actions modelling and their associated error probabilities are characterized by its inaccuracy and uncertainty. This Ph. Dissertation aims to update and improve PSA models, in order to apply with-in the framework of PSR and RIDM. In this sense, two main objectives are established. Firstly, the development of a time dependent RAM (reliability, availability and maintainability) for safety-related components, fitted with a historical plant data and with enough level of detail to include the effects of testing and maintenance activities in the age of the component. Secondly, it shows PSA applications of new models in RIDM. In the first place, it defines an age-dependent risk model based on the RAM model previously formulated, which helps to select the best approach of maintenance and testing activities for a specific timeline. In the second place, to improve PSA modelling and human error probabilities (HEP) quantification, a methodology is pro-posed to evaluate the risk impact of human actions and TS changes, taking advantage of combining DSA and PSA insights. The work of this thesis is part of the research supported by the Ministry of Economy and Business in the project ENE2016-80401-R, "Risk Informed Harmonization of Surveillance Requirements and Maintenance in Nuclear Power Plants", and in the Doctoral Fellowship BES-2014-067602., Las aportaciones que conforman esta tesis doctoral se integran en la línea de investigación financiada por el Ministerio de Economía y Empresa en el proyecto ENE2016- 80401-R, “Armonización de requisitos de vigilancia y mantenimiento en centrales nucleares con información en el riesgo” y la ayuda para contratos predoctorales para la formación de doctores BES-2014-067602.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of risk impact of Completion Time changes combining PSA and DSA model insight and human reliability analysis

  • Martorell-Aygues, Pablo
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Sanchez Saez, Francisco|||0000-0002-3011-9884
  • Saiz-Córdoba, Matilde
[EN] Although in risk screening of equipment structures, systems and components, changes can be accomplished directly using RG 1.174, a plant change may also include changes to human actions. Human reliability analysis is an integral part of probabilistic safety assessment modeling. Using best estimate codes can identify unknown accident sequences as well as quantify more realistic probabilities of human error. This paper proposes a three-step approach to evaluate the risk impact of changes to completion time within nuclear power plant technical specifications, using a probabilistic safety assessment model refined by a best-estimate safety analysis and human reliability analysis. A case study is presented focusing on a completion time change of the residual heat removal system of a nuclear power plant using a level 1 low power and shutdown probabilistic safety assessment. Thus, the application case shows that the change could be accepted from a risk viewpoint, in particular, because of the risk increase imposed by extending the completion time is partially compensated by the risk decrease due to the human error probability reduction since the stress level is reduced., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Projects ENE2013-45540-R and ENE2016-80401-R) and the doctoral scholarship awarded (BES-2014-067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unavailability model for demand-caused failures of safety components addressing degradation by demand-induced stress, maintenance effectiveness and test efficiency

  • Martorell-Aygues, Pablo
  • Marton Lluch, Isabel|||0000-0001-6955-3912
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
[EN] The reliability, availability and maintainability (RAM) modelling of safety equipment has long been a topic of major concern. Some RAM models have focused on explicitly addressing the effect of component degradation and surveillance and maintenance policies, searching for an optimum level of the safety component RAM by adjusting surveillance and maintenance related parameters. As regards the reliability contribution, these components normally have two main types of failure mode that contribute to the probability of failure on demand (PFD): (1) by demand-caused and (2) standby-related failures. The former is normally associated with a demand failure probability, which is affected by the degradation caused by demand-related stress. Surveillance testing therefore not only introduces a positive effect, but also an adverse one, which it compensates by performing maintenance activities to eliminate or reduce the accumulated degradation. This paper proposes a new model for the demand failure probability that explicitly addresses all aspects of the effect of demand-induced stress (mostly test-induced stress), maintenance effectiveness (PAS or PAR model) and test efficiency. A case study is included on an application to a typical motor-operated valve in a nuclear power plant., The authors are grateful to the Spanish Ministry of Science and Innovation for the financial support received (Research Projects ENE2013-45540-R and ENE2016-80401-R) and the doctoral scholarship awarded (BES-2014-067602). The study also received financial support from the Spanish Research Agency and the European Regional Development Fund.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Parameter Estimation of a Reliability Model of Demand-Caused and Standby-Related Failures of Safety Components Exposed to Degradation by Demand Stress and Ageing That Undergo Imperfect Maintenance

  • Martorell, Sebastián
  • Martorell, Pablo
  • Sánchez, Ana Isabel
  • Mullor, Rubén
  • Martón, Isabel
  • Mullor, Rubén|||/items/ac398532-5c8e-4fb7-b398-a8e9bab4d763
One can find many reliability, availability, and maintainability (RAM) models proposed in the literature. However, such models become more complex day after day, as there is an attempt to capture equipment performance in a more realistic way, such as, explicitly addressing the effect of component ageing and degradation, surveillance activities, and corrective and preventive maintenance policies. Then, there is a need to fit the best model to real data by estimating the model parameters using an appropriate tool. This problem is not easy to solve in some cases since the number of parameters is large and the available data is scarce. This paper considers two main failure models commonly adopted to represent the probability of failure on demand (PFD) of safety equipment: (1) by demand-caused and (2) standby-related failures. It proposes a maximum likelihood estimation (MLE) approach for parameter estimation of a reliability model of demand-caused and standby-related failures of safety components exposed to degradation by demand stress and ageing that undergo imperfect maintenance. The case study considers real failure, test, and maintenance data for a typical motor-operated valve in a nuclear power plant. The results of the parameters estimation and the adoption of the best model are discussed.