Pasar al contenido principal

SINTESIS DE COMPOSITES DE BASE CEMENTO ECOEFICIENTES Y SUPERAISLANTES A PARTIR DE LA VALORIZACION DE RESIDUOS Y SUBPRODUCTOS CON ALTO CONTENIDO DE SILICE Y SILICO-ALUMINA

BIA2015-65558-C3-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coal-mining tailings as a pozzolanic material in cements industry

  • Yagüe, Santiago
  • Sánchez, Isabel
  • Vigil de la Villa, Raquel
  • García-Giménez, Rosario
  • Zapardiel, Antonio
  • Frías, Moisés
The generation of enormous volumes of mine-tailing waste is standard practice in the mining industry. Large quantities of these tailings are also sources of kaolinite-rich materials that accumulate in slag heaps, causing significant environmental degradation and visual impacts on the landscape. The consequences of coal refuse dumped in slagheaps calls for the study of eco-innovative solutions and the assessment of waste types. Moreover, the environmental benefits of reusing large amounts of contaminated waste are also evident. Hence, the objective of this investigation is to expand current knowledge of new siliceous-aluminium minerals and their pozzolanic activity. Four raw tailing samples are characterized to determine their chemical (by ICP/MS analysis), morphological (by SEM/EDX analysis), and mineralogical (by XRD analysis) compositions prior to their thermal activation that transforms the inert wastes at various temperatures into materials with cementitious properties. The results of XRD analysis following activation confirmed that the kaolinite content is fully transformed into metakaolinite. The coal refuse samples presented sufficiently reliable levels of pozzolanic activity for use as additives in industrial cements., This research was supported by the Spanish Ministry of Economy and Competitiveness (Project Ref BIA2015-65558-C3-1-2-3R (MINECO/FEDER)). The authors are also grateful to the Sociedad Anónima Huellera Vasco-Leonesa and to the Spanish Cement Institute (IECA) for their assistance with this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ca/Si and Si/Al ratios of metakaolinite-based wastes: Their influence on mineralogy and mechanical strengths

  • García-Giménez, Rosario
  • Frías, Moisés
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
Kaolinite-based wastes are researched as an alternative means of extracting metakaolinite, a pozzolanic product for the manufacture of eco-efficient cements. However, both crystallinity and the content of this crystalline phase play important roles during their thermal activation and, therefore, in their subsequent behavior in the matrix with cementitious properties. In this study, the initial compositions of two thermally activated products (paper sludge and coal waste) are studied for both the mineralogy and the mechanical properties of binary cements. The elemental composition of the materials was analyzed with X-ray Fluorescence (XRF). The mineralogy of the crystalline materials was determined by X-ray Diffraction (XRD). The sample morphology was determined with scanning electron microscopy (SEM). The pozzolanic activity is measured by accelerated methods and the preparation of the specimens of blended cement is prepared following the procedure described by Kock-Steinegger. The results showed that the pozzolanic activity of the waste (in terms of fixed lime) was similar at 90 days but that its reaction rate was different. The pozzolanic reaction of both wastes produced stratlingite and C-S-H gels, with the presence of C<sub>4</sub>AH<sub>13</sub>. The C-S-H gel generated with coal waste had very short chains, was poorer in Ca and was rich in Al. The addition of both wastes to the cement modified its mineralogical composition in comparison with a conventional cement, favoring the formation of C<sub>4</sub>AH<sub>13</sub> over the formation of ettringite., The authors are grateful to the Spanish Ministry of Economy and Competiveness (MINECO/FEDER) by the financial support (BIA2015-65558-C3-1/2/3-R) y a la Sociedad Anónima Hullera Vasco-Leonesa (León, Spain) and the Spanish Cement Institute (IECA, Madrid, Spain) for their support in this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of ZnO on the activation of kaolinite-based coal waste: Pozzolanic activity and mineralogy in the pozzolan/lime system

  • García-Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
  • Fernández-Carrasco, Lucía
  • Frías, Moisés
One inconvenience presented by the thermal activation of kaolinite-based wastes is their low content of metakaolinite, a highly pozzolanic product listed in current standards for the manufacture of commercial cements. The addition of a chemical activator during the thermal activation process is a priority line of research to increase the reactivity of the recycled metakaolinite. In this paper, an additional chemical activator, ZnO, is studied and its effect on both pozzolanic properties and the evolution of mineralogical phases in the thermal activation of coal waste with a reaction time of up to 90 days in the pozzolan/lime system. To do so, activation temperatures of between 550 °C/650 °C were selected and additions of chemical activator (ZnO) in percentages of between 0.0% and 3.0% by weight of coal waste, because it is an activator with a positive effect on a 100% natural kaolinite. The results showed that the incorporation of ZnO inhibited the reactivity of the recycled metakaolinite and in consequence, the capacity of the metakaolinite to react with the surrounding lime; even more so when the content of added chemical activator was raised, albeit with some exceptions, in the samples activated at 550 °C and 650 °C with 0.5% of chemical activator. In none of the cases under analysis was the chemical activator able to improve the properties of the metakaolinite in comparison with the properties of the reference sample activated only with temperature. The hydrated phases that appeared in the pozzolanic reaction were tetracalcium aluminate hydrate, stratlingite, monosulfoaluminate hydrate and LDH (phyllosilicate/carbonate), The authors wish to express their gratitude and sincere appreciation to the Spanish Ministry of the Economy and Competitiveness under coordinated projects MAT2012-37005-CO3-01, BIA2015-65558-C3-1-2-3R (MINECO/FEDER) for financing this research work and grateful to the Sociedad Anónima Hullera Vasco-Leonesa (Spain) and to the Spanish Cement Institute (IECA) for their assistance with this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of a high content in activated carbon waste on low clinker cement microstructure and properties

  • Frías, Moisés
  • Vigil de la Villa, Raquel
  • García-Giménez, Rosario
  • Martínez-Ramírez, S.
  • Villar-Cociña, E.
  • Vegas, Iñigo
In the context of cement industry sustainability and socio-economic development, one of the primary objectives of the circular economy is the use of industrial waste as a supplementary cementitious material in the manufacture of future eco-efficient binders. This paper reports a first-time study of the effect of large proportions of the activated carbon (AC) waste used in low clinker cements on the properties and structure of the new binders. The behaviour of blended cement matrices prepared with 20%–50% AC as a pozzolan was analysed in terms of their chemical, mechanical and physical (rheology, heat of hydration, drying shrinkage, microporosity) properties. Macroporosity was also assessed with computed tomography (CT). The findings showed that these blended cements meet standard chemical and rheological requirements and that the 50% AC binder qualifies as a low heat cement. Drying shrinkage was observed to intensify with higher percentages of AC. A rise in total porosity was attendant upon pore size refinement, with an increase in the <100 nm fraction. Compressive strength declined with rising replacement ratios. Further to the CT findings, macroporosity (0.001–0.09 mm3) also increased with AC content, especially in the binders bearing 50% of the addition., This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER)). The assistance received for this study from Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Spanish Cement Institute (IECA) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cements based on kaolinite waste

  • García-Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Frías, Moisés
  • Martínez-Ramírez, S.
  • Vegas, Íñigo
  • Fernández-Carrasco, Lucía
This article is part of the special issue “European Geosciences Union General Assembly 2018, EGU Division Energy, Resources & Environment (ERE)”. It is a result of the EGU General Assembly 2018, Vienna, Austria, 8–13 April 2018., The cement industry involves high-energy consumption that generates high CO2 emissions into the atmosphere. Environmental concerns can be addressed by replacing parts of Portland cement clinkers with pozzolanic materials in mortars and concrete. Slag, fly ash and silica fume are materials considered for the planned replacement. Research studies on clay minerals, such as kaolinite, are being followed with special attention by the scientific community and the cement industry. It is well known that these minerals require an activation process to transform kaolinite (K) into metakaolinite (MK). MK is an amorphous material from the transformation of K with high pozzolanic activity, which is its capacity to react with the portlandite released during the hydration of Portland cement, generating compounds such as C–S–H gels and some aluminum-phase hydrates. One of the MK production methods is heat treatment controlled by kaolinite at temperatures in the range of 600–900 ∘C. Different residues have been used (coal mining, paper sludge and waste from a drinking water treatment plant) activated at 600 ∘C for 2 h to elaborate blended cements. Due to their good behaviour as future eco-efficient additions, this research is a study by x-ray fluorescence (XRF), x-ray diffraction (XRD) and scanning electron microscopy (SEM) of their influence on the performances of blended cement mixtures (binary and ternary one), with substitutions of pozzolan ratio at 28 days of hydration. The porosity of pozzolanic cements decreases because of the formation of hydrated phases during pozzolanic reaction., The authors wish to express their gratitude and sincere appreciation to the Spanish Ministry of the Economy and Competitiveness under coordinated projects BIA2015-65558-C3-1-2-3R (MINECO/FEDER) for financing this research work. We are grateful to the Sociedad Anónima Hullera Vasco-Leonesa (Spain) and to the Spanish Cement Institute (IECA) for their assistance with this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The deterioration and environmental impact of binary cements containing thermally activated coal mining waste due to calcium leaching

  • Arribas, Idoia
  • Vegas, Iñigo
  • García, V.
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
  • Frías, Moisés
Calcium-leaching processes can potentially degrade the structure of a concrete matrix. This problem is studied here through the progressive dissolution of Ca2+ in both ordinary Portland cement pastes (C-0) and binary cement blends (C-20) containing 20% thermally Activated Coal Mining Waste (ACMW).1 A series of accelerated tests are conducted that involve the immersion of these cement pastes in a 6 M ammonium nitrate solution at a temperature of 20 °C for 7 and for 21 days. A rise in paste porosity was observed, due to increased capillary pore sizes of between 5 and 0.1 μm. In the case of the 20% ACMW pastes (C-20), calcium leaching decreased, probably as a consequence of the pozzolanic effect of the ACMW, while potassium and magnesium leaching increased, due to the presence of the phyllosilicates in the ACMW. The paste compounds most affected by leaching were Ca(OH)2, C6AS3H32, and C4AH12. In general terms, it can be concluded that the incorporation of ACMW into binary cements slightly reduces the calcium leaching phenomena. Concerning the environmental impact assessment, the substitution of 20% OPC by ACMW reduced CO2 emissions by as much as 12% and improved energy efficiency by using approximately 19% fewer fossil resource, This research was developed in the framework of the MATCON Associated Unit (CSIC-Tecnalia, Madrid, Spain) with the support of the Spanish Ministry of Economy and Competitiveness (Project Ref. MAT2012-37005-CO3-01/02/03) and the European Regional Development Fund (MINECO/FEDER) (Project Ref. BIA2015-65558-C3-1,2,3-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of chloride transport in blended cement mortars containing coal mining waste

  • Caneda-Martínez, Laura
  • Frías, Moisés
  • Medina, César
  • Sánchez de Rojas, María Isabel
  • Rebolledo, Nuria
  • Sánchez-Montero, Javier
In this study, the effect of the addition of a thermally activated coal mining waste (CMW) on the chloride permeability of blended cements in amounts from 10 to 50% was assessed by salt ponding test. The parameters involved in the infiltration of chloride have been evaluated by XRD, TG and MIP techniques, as well as by electric resistivity measurements. A remarkable improvement in chloride diffusion was found as the CMW content increased, which has resulted in a decrease of one order of magnitude in the chloride diffusion coefficients of specimens containing 50% of CMW (2.7·10−12 m2/s) with respect to OPC samples (20·10−12 m2/s). The chemical analyses have shown that immobilization of chloride ions as Friedel’s salt takes place as a result of their reaction with the abundant hydrated aluminate phases formed as a consequence of the high alumina content in CMW. Moreover, it has been observed a refinement of the capillary network with the addition of CMW that has been manifested through a decrease in pore size and a subsequent increase in electrical resistivity., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (MINECO/FEDER) (Project Ref. BIA-2015-65558-C3-1, 2,3-R) as well as by the Spanish Training Program and the European Social Fund (MINECO/FSE) (Ref. Number BES-2016-078454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pozzolanic reaction of a biomass waste as mineral addition to cement based saterials: studies by Nuclear Magnetic Resonance (NMR)

  • Martínez-Ramírez, S.
  • Frías, Moisés
  • Nakanishi, Erika Y.
  • Savastano Jr., Holmer
Non-fossil alternative fuels from biomass (agro-industrial, forestry and fodder plants) focus on getting cleaner, cheaper and more environmentally friendly energy sources directly related to the sustainable development of future societies. The resulting ash produced from the biomass calcination is a viable alternative for use as supplementary cementing materials in the construction industry. This study explores the scientific knowledge of calcium-silicate hydrate (C-S-H) gel formation during pozzolanic reaction between the biomass ash and calcium hydroxide through nuclear magnetic resonance technique with two different types of elephant grass ash that have different microstructure. The ash with the highest initial percentage of Q4 and Q3 units was found to react most actively and give rise to gels with the greatest inter-tetrahedral connectivity. In contrast, ash with higher content of total SiO2, exhibited lower reactivity and the C-S-H gel formed is characterised by low inter-tetrahedral connectivity from the earliest ages. Evaluation of C-S-H gel by nuclear magnetic resonance (NMR), as main hydrated phase for the engineering properties, revealed the potential of this tool to determine the effectiveness of this type of grass as raw material in cementing matrices through the evolution of the microstructure of the gel C-S-H formed., This research was financially supported by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER). The authors are grateful to the Framework Agreement of Collaboration between IETcc/CSIC (Spain) and FZEA/USP (Brazil) (ref: 2013040043) and to CNPq (ref: 306386/2013-5). Finally, the authors are gratefully to the Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Spanish Cement Institute (IECA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of mineral additions on the microstructure and properties of blended cement matrices for fibre-cement applications

  • Mejia-Ballesteros, Julian Eduardo
  • Holmer, Savastano Jr.
  • Fiorelli, Juliano
  • Frías, Moisés
This detailed study of the effect of three mineral additions (limestone, rice husk ash and activated coal miningwaste) differing in composition and properties explored the behaviour of blended cements with a 25% re-placement ratio. The aim was to select the optimal addition for improving the performance of naturalfibre-reinforced cements. The pozzolanic, physical and mechanical properties as well as the pore structure of theblended cement matrices were examined. Thefindings showed that although rice husk ash is characterised byhigh pozzolanicity, it had a less favourable effect on the cement than expected, yielding porous, poorly com-pacted and hence weak matrices. The activated coal mining waste showed better performance, reaching similarstrength to control mortar, better pore size refinement and an important reduction in mean pore size of 60%compared to control mortar after 60 days of curing. In light of thosefindings, this aluminosilicate addition isproposed as the most apt of the three studied for improving the quality offibre-reinforced cements, keeping inmind that the interaction effect amongst the three mineral additions was not considered in the present work, This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER)), the National Research Council’s I-COOP Programme (ref: COOPA20089-2015) and CNPq (project #306386/2013-5). The backing afforded by the Commission on In-service Training for Higher Education Personnel (CAPES) and the Framework Partnering Agreement between IETcc/CSIC (Spain) and FZEA/USP (Brazil) (ref: 2013040043) is gratefully acknowledged. Funding was also provided by FAPESP under Thematice Project #2012/51467-3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reuse of coal mining waste to lengthen the service life of cementitious matrices

  • Caneda-Martínez, Laura
  • Frías, Moisés
  • Sánchez-Montero, Javier
  • Medina, César
  • Sánchez de Rojas, María Isabel
A chloride-induced accelerated corrosion test was conducted on steel bars embedded in mortar specimensprepared with thermally activated coal mining waste (ACMW). ACMW was observed to prompt two oppositeeffects: a delay in chloride ion penetration and a reduction in the critical chloride content needed to initiatecorrosion. Service life predictions based on thefindings revealed that adding 20% or 50% ACMW to cementimproved reinforcement corrosion resistance. Optimal results were observed for 20% replacement, in which themean reinforcement section loss was 21% lower than in OPC, Funding for this research was provided by the Spanish Ministry of the Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF) [ref. BIA-2015-65558-C3-1,2,3-R], as well as by the Spanish Training Programme (MINECO) and the European Social Fund (ESF) [ref. BES-2016-078454]. The support received from Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Instituto Español del Cemento y sus Aplicaciones (IECA, Spanish cement institute) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of biomass-fired power plant bottom ash as an addition in new blended cements: Effect on the structure of the C-S-H gel formed during hydration

  • Sáez del Bosque, Isabel F.
  • Medina, José María
  • Frías, Moisés
  • Sánchez de Rojas, María Isabel
  • Medina, César
The identification of new supplementary cementitious materials (SCMs) for use in blended cements is an area of major interest to the scientific community. The industry is equally keen for, given the vast amounts of raw materials and emission of large volumes of greenhouse gases involved in cement manufacture, it is under pressure to reduce its environmental footprint. This study explored hydration in blended cements bearing 20 wt% bottom ash (BBA) from three biomass-fired power plants. The results showed that the OPC-BBA blended and the neat OPC pastes exhibited similar degrees of hydration (~90%) and their C-S-H gels similar Al/Si ratios (0.08–0.09), while the mean chain length of the C-S-H gels was slightly higher in the former (5.15–5.30 for blended cement vs. 4.71 for OPC). The presence of pozzolanic activity in the BBA pastes, in turn, was confirmed by their lower CH and higher C-S-H gel content than would be expected on the grounds of the dilution of the amount of cement used, This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R and BIA2016-76643-C3-1-R) (MINECO), as well as by the Government of Extremadura and the European Regional Development Fund (ERDF) under grant GR 18122 awarded to the MATERIA research group. The authors wish to thank the Nuclear Magnetic Resonance support staff at the Madrid Institute for Materials Science (ICMM, a National Research Council body) for their assistance in conducting the 29Si MAS NMR trials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water transport in binary eco-cements containing coal mining waste

  • Caneda-Martínez, Laura
  • Medina, César
  • Sánchez de Rojas, María Isabel
  • Frías, Moisés
This study explores certain indirect, water transport-related durability indicators for mortars made with cement in which 20% or 50% of the ordinary portland cement (OPC) is replaced by thermally activated coal mining waste (ACMW). The valorisation of ACMW is triply beneficial, environmentally speaking, for it reduces waste stockpiling and its processing emits less CO2 and requires less fossil fuel-based energy than OPC manufacture. Its addition was observed to generate a finer pore structure and a larger volume of pores accessible to water. In mortars with 50% ACMW, pore volume rose by approximately 30%, lowering density and consequently mechanical strength. Total water absorption declined by 13% and capillary absorption by 24% in mortars with 20% ACMW, whilst no significant variations in either parameter relative to the OPC reference were found in the materials with 50% replacement ratios. Permeability to water penetration under pressure rose substantially in both blended mortars, although as the maximum and mean depth values lay within the limits specified in Spain's structural concrete code, the materials would be classified as impermeable. The mortars with 20% replacement exhibited no greater drying shrinkage than the OPC materials, whereas the mortars bearing 50% ACMW shrank by approximately 50% more than the reference., Funding for this research was provided by the Spanish Ministry of the Economy and Competitiveness (MINECO) and the European Regional Development Fund [ref. BIA-2015-65558-C3-1,2,3-R], as well as by the Spanish Training Programme (MINECO) and the European Social Fund [ref. BES-2016-078454]. The support received from the Instituto Español del Cemento y sus Aplicaciones (IECA, Spanish cement institute), SIKA (Madrid, Spain) and Sociedad Anónima Hullera Vasco-Leonesa is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and properties of eco-friendly binary mortars containing ash from biomass-fuelled power plants

  • Medina, José María
  • Sáez del Bosque, Isabel F.
  • Frías, Moisés
  • Sánchez de Rojas, María Isabel
  • Medina, César
The use of biomass to produce electric power and heat will intensify in the years to come, in pursuit of sustainable growth. Stockpiling the vast amounts of fly and bottom ash generated in that process wastes resources and has an adverse impact on the environment. The viability of bottom ash as a supplementary cementitious material in new eco-efficient cements is studied, including its effect on binder chemical, rheological, mechanical and microstructural properties. The findings show that these additions induce improvements in later age mechanical performance relative to conventional mortars. An ANOVA conducted to determine the impact of waste type, replacement ratio and curing time on compressive and flexural strength reveals that the latter two have a significant effect on mechanical properties. The new cements meet the requirements laid down in EN 197-1 for CEM II/A and CEM IV/A cements, making them apt for use in construction., This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R and BIA2016-76643-C3-1-R) (MINECO/FEDER), as well as by the Government of Extremadura and the European Regional Development Fund (ERDF) under grant GR 18122 awarded to the MATERIA research group., Peer reviewed