Pasar al contenido principal

SINTESIS DE COMPOSITES DE BASE CEMENTO ECOEFICIENTES Y SUPERAISLANTES A PARTIR DE LA VALORIZACION DE RESIDUOS Y SUBPRODUCTOS CON ALTO CONTENIDO DE SILICE Y SILICO-ALUMINA

BIA2015-65558-C3-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario FUNDACION TECNALIA RESEARCH & INNOVATION
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coal-mining tailings as a pozzolanic material in cements industry

  • Yagüe, Santiago
  • Sánchez, Isabel
  • Vigil de la Villa, Raquel
  • García-Giménez, Rosario
  • Zapardiel, Antonio
  • Frías, Moisés
The generation of enormous volumes of mine-tailing waste is standard practice in the mining industry. Large quantities of these tailings are also sources of kaolinite-rich materials that accumulate in slag heaps, causing significant environmental degradation and visual impacts on the landscape. The consequences of coal refuse dumped in slagheaps calls for the study of eco-innovative solutions and the assessment of waste types. Moreover, the environmental benefits of reusing large amounts of contaminated waste are also evident. Hence, the objective of this investigation is to expand current knowledge of new siliceous-aluminium minerals and their pozzolanic activity. Four raw tailing samples are characterized to determine their chemical (by ICP/MS analysis), morphological (by SEM/EDX analysis), and mineralogical (by XRD analysis) compositions prior to their thermal activation that transforms the inert wastes at various temperatures into materials with cementitious properties. The results of XRD analysis following activation confirmed that the kaolinite content is fully transformed into metakaolinite. The coal refuse samples presented sufficiently reliable levels of pozzolanic activity for use as additives in industrial cements., This research was supported by the Spanish Ministry of Economy and Competitiveness (Project Ref BIA2015-65558-C3-1-2-3R (MINECO/FEDER)). The authors are also grateful to the Sociedad Anónima Huellera Vasco-Leonesa and to the Spanish Cement Institute (IECA) for their assistance with this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ca/Si and Si/Al ratios of metakaolinite-based wastes: Their influence on mineralogy and mechanical strengths

  • García-Giménez, Rosario
  • Frías, Moisés
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
Kaolinite-based wastes are researched as an alternative means of extracting metakaolinite, a pozzolanic product for the manufacture of eco-efficient cements. However, both crystallinity and the content of this crystalline phase play important roles during their thermal activation and, therefore, in their subsequent behavior in the matrix with cementitious properties. In this study, the initial compositions of two thermally activated products (paper sludge and coal waste) are studied for both the mineralogy and the mechanical properties of binary cements. The elemental composition of the materials was analyzed with X-ray Fluorescence (XRF). The mineralogy of the crystalline materials was determined by X-ray Diffraction (XRD). The sample morphology was determined with scanning electron microscopy (SEM). The pozzolanic activity is measured by accelerated methods and the preparation of the specimens of blended cement is prepared following the procedure described by Kock-Steinegger. The results showed that the pozzolanic activity of the waste (in terms of fixed lime) was similar at 90 days but that its reaction rate was different. The pozzolanic reaction of both wastes produced stratlingite and C-S-H gels, with the presence of C<sub>4</sub>AH<sub>13</sub>. The C-S-H gel generated with coal waste had very short chains, was poorer in Ca and was rich in Al. The addition of both wastes to the cement modified its mineralogical composition in comparison with a conventional cement, favoring the formation of C<sub>4</sub>AH<sub>13</sub> over the formation of ettringite., The authors are grateful to the Spanish Ministry of Economy and Competiveness (MINECO/FEDER) by the financial support (BIA2015-65558-C3-1/2/3-R) y a la Sociedad Anónima Hullera Vasco-Leonesa (León, Spain) and the Spanish Cement Institute (IECA, Madrid, Spain) for their support in this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of ZnO on the activation of kaolinite-based coal waste: Pozzolanic activity and mineralogy in the pozzolan/lime system

  • García-Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
  • Fernández-Carrasco, Lucía
  • Frías, Moisés
One inconvenience presented by the thermal activation of kaolinite-based wastes is their low content of metakaolinite, a highly pozzolanic product listed in current standards for the manufacture of commercial cements. The addition of a chemical activator during the thermal activation process is a priority line of research to increase the reactivity of the recycled metakaolinite. In this paper, an additional chemical activator, ZnO, is studied and its effect on both pozzolanic properties and the evolution of mineralogical phases in the thermal activation of coal waste with a reaction time of up to 90 days in the pozzolan/lime system. To do so, activation temperatures of between 550 °C/650 °C were selected and additions of chemical activator (ZnO) in percentages of between 0.0% and 3.0% by weight of coal waste, because it is an activator with a positive effect on a 100% natural kaolinite. The results showed that the incorporation of ZnO inhibited the reactivity of the recycled metakaolinite and in consequence, the capacity of the metakaolinite to react with the surrounding lime; even more so when the content of added chemical activator was raised, albeit with some exceptions, in the samples activated at 550 °C and 650 °C with 0.5% of chemical activator. In none of the cases under analysis was the chemical activator able to improve the properties of the metakaolinite in comparison with the properties of the reference sample activated only with temperature. The hydrated phases that appeared in the pozzolanic reaction were tetracalcium aluminate hydrate, stratlingite, monosulfoaluminate hydrate and LDH (phyllosilicate/carbonate), The authors wish to express their gratitude and sincere appreciation to the Spanish Ministry of the Economy and Competitiveness under coordinated projects MAT2012-37005-CO3-01, BIA2015-65558-C3-1-2-3R (MINECO/FEDER) for financing this research work and grateful to the Sociedad Anónima Hullera Vasco-Leonesa (Spain) and to the Spanish Cement Institute (IECA) for their assistance with this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of a high content in activated carbon waste on low clinker cement microstructure and properties

  • Frías, Moisés
  • Vigil de la Villa, Raquel
  • García-Giménez, Rosario
  • Martínez-Ramírez, S.
  • Villar-Cociña, E.
  • Vegas, Iñigo
In the context of cement industry sustainability and socio-economic development, one of the primary objectives of the circular economy is the use of industrial waste as a supplementary cementitious material in the manufacture of future eco-efficient binders. This paper reports a first-time study of the effect of large proportions of the activated carbon (AC) waste used in low clinker cements on the properties and structure of the new binders. The behaviour of blended cement matrices prepared with 20%–50% AC as a pozzolan was analysed in terms of their chemical, mechanical and physical (rheology, heat of hydration, drying shrinkage, microporosity) properties. Macroporosity was also assessed with computed tomography (CT). The findings showed that these blended cements meet standard chemical and rheological requirements and that the 50% AC binder qualifies as a low heat cement. Drying shrinkage was observed to intensify with higher percentages of AC. A rise in total porosity was attendant upon pore size refinement, with an increase in the <100 nm fraction. Compressive strength declined with rising replacement ratios. Further to the CT findings, macroporosity (0.001–0.09 mm3) also increased with AC content, especially in the binders bearing 50% of the addition., This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER)). The assistance received for this study from Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Spanish Cement Institute (IECA) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cements based on kaolinite waste

  • García-Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Frías, Moisés
  • Martínez-Ramírez, S.
  • Vegas, Íñigo
  • Fernández-Carrasco, Lucía
This article is part of the special issue “European Geosciences Union General Assembly 2018, EGU Division Energy, Resources & Environment (ERE)”. It is a result of the EGU General Assembly 2018, Vienna, Austria, 8–13 April 2018., The cement industry involves high-energy consumption that generates high CO2 emissions into the atmosphere. Environmental concerns can be addressed by replacing parts of Portland cement clinkers with pozzolanic materials in mortars and concrete. Slag, fly ash and silica fume are materials considered for the planned replacement. Research studies on clay minerals, such as kaolinite, are being followed with special attention by the scientific community and the cement industry. It is well known that these minerals require an activation process to transform kaolinite (K) into metakaolinite (MK). MK is an amorphous material from the transformation of K with high pozzolanic activity, which is its capacity to react with the portlandite released during the hydration of Portland cement, generating compounds such as C–S–H gels and some aluminum-phase hydrates. One of the MK production methods is heat treatment controlled by kaolinite at temperatures in the range of 600–900 ∘C. Different residues have been used (coal mining, paper sludge and waste from a drinking water treatment plant) activated at 600 ∘C for 2 h to elaborate blended cements. Due to their good behaviour as future eco-efficient additions, this research is a study by x-ray fluorescence (XRF), x-ray diffraction (XRD) and scanning electron microscopy (SEM) of their influence on the performances of blended cement mixtures (binary and ternary one), with substitutions of pozzolan ratio at 28 days of hydration. The porosity of pozzolanic cements decreases because of the formation of hydrated phases during pozzolanic reaction., The authors wish to express their gratitude and sincere appreciation to the Spanish Ministry of the Economy and Competitiveness under coordinated projects BIA2015-65558-C3-1-2-3R (MINECO/FEDER) for financing this research work. We are grateful to the Sociedad Anónima Hullera Vasco-Leonesa (Spain) and to the Spanish Cement Institute (IECA) for their assistance with this research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The deterioration and environmental impact of binary cements containing thermally activated coal mining waste due to calcium leaching

  • Arribas, Idoia
  • Vegas, Iñigo
  • García, V.
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
  • Frías, Moisés
Calcium-leaching processes can potentially degrade the structure of a concrete matrix. This problem is studied here through the progressive dissolution of Ca2+ in both ordinary Portland cement pastes (C-0) and binary cement blends (C-20) containing 20% thermally Activated Coal Mining Waste (ACMW).1 A series of accelerated tests are conducted that involve the immersion of these cement pastes in a 6 M ammonium nitrate solution at a temperature of 20 °C for 7 and for 21 days. A rise in paste porosity was observed, due to increased capillary pore sizes of between 5 and 0.1 μm. In the case of the 20% ACMW pastes (C-20), calcium leaching decreased, probably as a consequence of the pozzolanic effect of the ACMW, while potassium and magnesium leaching increased, due to the presence of the phyllosilicates in the ACMW. The paste compounds most affected by leaching were Ca(OH)2, C6AS3H32, and C4AH12. In general terms, it can be concluded that the incorporation of ACMW into binary cements slightly reduces the calcium leaching phenomena. Concerning the environmental impact assessment, the substitution of 20% OPC by ACMW reduced CO2 emissions by as much as 12% and improved energy efficiency by using approximately 19% fewer fossil resource, This research was developed in the framework of the MATCON Associated Unit (CSIC-Tecnalia, Madrid, Spain) with the support of the Spanish Ministry of Economy and Competitiveness (Project Ref. MAT2012-37005-CO3-01/02/03) and the European Regional Development Fund (MINECO/FEDER) (Project Ref. BIA2015-65558-C3-1,2,3-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New developments in low clinker cement paste mineralogy

  • Frías, Moisés
  • Vigil de la Villa, Raquel
  • García-Giménez, Rosario
  • Martínez-Ramírez, S.
  • Fernández-Carrasco, Lucía
The use of industrial waste as a cement addition often changes the composition and development of the hydrated phases and with them matrix performance and durability, in particular at later ages. The effect of the presence in blended cement of 20% to 50% kaolinite based activated carbon waste (ACW) on paste hydration has been characterized by means of XRD, SEM/EDX, TG/DTG, NMR and FTIR to identify and monitor the mineralogical phases forming in materials at ages of up to 180 d. The results showed that the main reaction products forming in the first 7 d included C-S-H gels, C4ACH12 and C4AH13 (hydroxy-AFm). Whilst monocarboaluminate (Mc) content declined with rising percentages of ACW, the amount of hexagonal phase hydroxy-AFm rose. Then microstructure of the C-S-H gels developing in the OPC and the 50% additioned paste differed. Compact C-S-H gel plates, and phyllosilicate-like laminar spongy microplates with high polymerised C-S-H gel formed in the blended cement paste., This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER). The assistance received from Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Spanish Cement Institute (IECA) for this study is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Freeze-thaw effect on the durability of binary cements containingactivated coal-mining waste

  • García-Giménez, Rosario
  • Frías, Moisés
  • Arribas, Idoia
  • Vegas, Iñigo
  • Vigil de la Villa, Raquel
  • Rubio, Virginia
The present work contains an approach to the evaluation of binary cements prepared with a 20% substi-tution of coal-mining waste and their behaviour under a maximum of 300 freeze/thaw cycles.Mineralogical studies are conducted, as well as tests on mass variations, compressive strength, microp-orosity, the dynamic modulus of elasticity, and SEM morphologies. It is important to highlight that thepartial replacement of cement by 20% of activated coal waste, does not affect the durability against freeze/thaw cycles, since they show a fairly similar tendency to the reference mortar under extreme tempera-ture changes, This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of chloride transport in blended cement mortars containing coal mining waste

  • Caneda-Martínez, Laura
  • Frías, Moisés
  • Medina, César
  • Sánchez de Rojas, María Isabel
  • Rebolledo, Nuria
  • Sánchez-Montero, Javier
In this study, the effect of the addition of a thermally activated coal mining waste (CMW) on the chloride permeability of blended cements in amounts from 10 to 50% was assessed by salt ponding test. The parameters involved in the infiltration of chloride have been evaluated by XRD, TG and MIP techniques, as well as by electric resistivity measurements. A remarkable improvement in chloride diffusion was found as the CMW content increased, which has resulted in a decrease of one order of magnitude in the chloride diffusion coefficients of specimens containing 50% of CMW (2.7·10−12 m2/s) with respect to OPC samples (20·10−12 m2/s). The chemical analyses have shown that immobilization of chloride ions as Friedel’s salt takes place as a result of their reaction with the abundant hydrated aluminate phases formed as a consequence of the high alumina content in CMW. Moreover, it has been observed a refinement of the capillary network with the addition of CMW that has been manifested through a decrease in pore size and a subsequent increase in electrical resistivity., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (MINECO/FEDER) (Project Ref. BIA-2015-65558-C3-1, 2,3-R) as well as by the Spanish Training Program and the European Social Fund (MINECO/FSE) (Ref. Number BES-2016-078454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pozzolanic reaction of a biomass waste as mineral addition to cement based saterials: studies by Nuclear Magnetic Resonance (NMR)

  • Martínez-Ramírez, S.
  • Frías, Moisés
  • Nakanishi, Erika Y.
  • Savastano Jr., Holmer
Non-fossil alternative fuels from biomass (agro-industrial, forestry and fodder plants) focus on getting cleaner, cheaper and more environmentally friendly energy sources directly related to the sustainable development of future societies. The resulting ash produced from the biomass calcination is a viable alternative for use as supplementary cementing materials in the construction industry. This study explores the scientific knowledge of calcium-silicate hydrate (C-S-H) gel formation during pozzolanic reaction between the biomass ash and calcium hydroxide through nuclear magnetic resonance technique with two different types of elephant grass ash that have different microstructure. The ash with the highest initial percentage of Q4 and Q3 units was found to react most actively and give rise to gels with the greatest inter-tetrahedral connectivity. In contrast, ash with higher content of total SiO2, exhibited lower reactivity and the C-S-H gel formed is characterised by low inter-tetrahedral connectivity from the earliest ages. Evaluation of C-S-H gel by nuclear magnetic resonance (NMR), as main hydrated phase for the engineering properties, revealed the potential of this tool to determine the effectiveness of this type of grass as raw material in cementing matrices through the evolution of the microstructure of the gel C-S-H formed., This research was financially supported by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER). The authors are grateful to the Framework Agreement of Collaboration between IETcc/CSIC (Spain) and FZEA/USP (Brazil) (ref: 2013040043) and to CNPq (ref: 306386/2013-5). Finally, the authors are gratefully to the Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Spanish Cement Institute (IECA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of mineral additions on the microstructure and properties of blended cement matrices for fibre-cement applications

  • Mejia-Ballesteros, Julian Eduardo
  • Holmer, Savastano Jr.
  • Fiorelli, Juliano
  • Frías, Moisés
This detailed study of the effect of three mineral additions (limestone, rice husk ash and activated coal miningwaste) differing in composition and properties explored the behaviour of blended cements with a 25% re-placement ratio. The aim was to select the optimal addition for improving the performance of naturalfibre-reinforced cements. The pozzolanic, physical and mechanical properties as well as the pore structure of theblended cement matrices were examined. Thefindings showed that although rice husk ash is characterised byhigh pozzolanicity, it had a less favourable effect on the cement than expected, yielding porous, poorly com-pacted and hence weak matrices. The activated coal mining waste showed better performance, reaching similarstrength to control mortar, better pore size refinement and an important reduction in mean pore size of 60%compared to control mortar after 60 days of curing. In light of thosefindings, this aluminosilicate addition isproposed as the most apt of the three studied for improving the quality offibre-reinforced cements, keeping inmind that the interaction effect amongst the three mineral additions was not considered in the present work, This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER)), the National Research Council’s I-COOP Programme (ref: COOPA20089-2015) and CNPq (project #306386/2013-5). The backing afforded by the Commission on In-service Training for Higher Education Personnel (CAPES) and the Framework Partnering Agreement between IETcc/CSIC (Spain) and FZEA/USP (Brazil) (ref: 2013040043) is gratefully acknowledged. Funding was also provided by FAPESP under Thematice Project #2012/51467-3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reuse of coal mining waste to lengthen the service life of cementitious matrices

  • Caneda-Martínez, Laura
  • Frías, Moisés
  • Sánchez-Montero, Javier
  • Medina, César
  • Sánchez de Rojas, María Isabel
A chloride-induced accelerated corrosion test was conducted on steel bars embedded in mortar specimensprepared with thermally activated coal mining waste (ACMW). ACMW was observed to prompt two oppositeeffects: a delay in chloride ion penetration and a reduction in the critical chloride content needed to initiatecorrosion. Service life predictions based on thefindings revealed that adding 20% or 50% ACMW to cementimproved reinforcement corrosion resistance. Optimal results were observed for 20% replacement, in which themean reinforcement section loss was 21% lower than in OPC, Funding for this research was provided by the Spanish Ministry of the Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF) [ref. BIA-2015-65558-C3-1,2,3-R], as well as by the Spanish Training Programme (MINECO) and the European Social Fund (ESF) [ref. BES-2016-078454]. The support received from Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Instituto Español del Cemento y sus Aplicaciones (IECA, Spanish cement institute) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of biomass-fired power plant bottom ash as an addition in new blended cements: Effect on the structure of the C-S-H gel formed during hydration

  • Sáez del Bosque, Isabel F.
  • Medina, José María
  • Frías, Moisés
  • Sánchez de Rojas, María Isabel
  • Medina, César
The identification of new supplementary cementitious materials (SCMs) for use in blended cements is an area of major interest to the scientific community. The industry is equally keen for, given the vast amounts of raw materials and emission of large volumes of greenhouse gases involved in cement manufacture, it is under pressure to reduce its environmental footprint. This study explored hydration in blended cements bearing 20 wt% bottom ash (BBA) from three biomass-fired power plants. The results showed that the OPC-BBA blended and the neat OPC pastes exhibited similar degrees of hydration (~90%) and their C-S-H gels similar Al/Si ratios (0.08–0.09), while the mean chain length of the C-S-H gels was slightly higher in the former (5.15–5.30 for blended cement vs. 4.71 for OPC). The presence of pozzolanic activity in the BBA pastes, in turn, was confirmed by their lower CH and higher C-S-H gel content than would be expected on the grounds of the dilution of the amount of cement used, This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R and BIA2016-76643-C3-1-R) (MINECO), as well as by the Government of Extremadura and the European Regional Development Fund (ERDF) under grant GR 18122 awarded to the MATERIA research group. The authors wish to thank the Nuclear Magnetic Resonance support staff at the Madrid Institute for Materials Science (ICMM, a National Research Council body) for their assistance in conducting the 29Si MAS NMR trials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water transport in binary eco-cements containing coal mining waste

  • Caneda-Martínez, Laura
  • Medina, César
  • Sánchez de Rojas, María Isabel
  • Frías, Moisés
This study explores certain indirect, water transport-related durability indicators for mortars made with cement in which 20% or 50% of the ordinary portland cement (OPC) is replaced by thermally activated coal mining waste (ACMW). The valorisation of ACMW is triply beneficial, environmentally speaking, for it reduces waste stockpiling and its processing emits less CO2 and requires less fossil fuel-based energy than OPC manufacture. Its addition was observed to generate a finer pore structure and a larger volume of pores accessible to water. In mortars with 50% ACMW, pore volume rose by approximately 30%, lowering density and consequently mechanical strength. Total water absorption declined by 13% and capillary absorption by 24% in mortars with 20% ACMW, whilst no significant variations in either parameter relative to the OPC reference were found in the materials with 50% replacement ratios. Permeability to water penetration under pressure rose substantially in both blended mortars, although as the maximum and mean depth values lay within the limits specified in Spain's structural concrete code, the materials would be classified as impermeable. The mortars with 20% replacement exhibited no greater drying shrinkage than the OPC materials, whereas the mortars bearing 50% ACMW shrank by approximately 50% more than the reference., Funding for this research was provided by the Spanish Ministry of the Economy and Competitiveness (MINECO) and the European Regional Development Fund [ref. BIA-2015-65558-C3-1,2,3-R], as well as by the Spanish Training Programme (MINECO) and the European Social Fund [ref. BES-2016-078454]. The support received from the Instituto Español del Cemento y sus Aplicaciones (IECA, Spanish cement institute), SIKA (Madrid, Spain) and Sociedad Anónima Hullera Vasco-Leonesa is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and properties of eco-friendly binary mortars containing ash from biomass-fuelled power plants

  • Medina, José María
  • Sáez del Bosque, Isabel F.
  • Frías, Moisés
  • Sánchez de Rojas, María Isabel
  • Medina, César
The use of biomass to produce electric power and heat will intensify in the years to come, in pursuit of sustainable growth. Stockpiling the vast amounts of fly and bottom ash generated in that process wastes resources and has an adverse impact on the environment. The viability of bottom ash as a supplementary cementitious material in new eco-efficient cements is studied, including its effect on binder chemical, rheological, mechanical and microstructural properties. The findings show that these additions induce improvements in later age mechanical performance relative to conventional mortars. An ANOVA conducted to determine the impact of waste type, replacement ratio and curing time on compressive and flexural strength reveals that the latter two have a significant effect on mechanical properties. The new cements meet the requirements laid down in EN 197-1 for CEM II/A and CEM IV/A cements, making them apt for use in construction., This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R and BIA2016-76643-C3-1-R) (MINECO/FEDER), as well as by the Government of Extremadura and the European Regional Development Fund (ERDF) under grant GR 18122 awarded to the MATERIA research group., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hydrated phases in the pozzolan / lime system of cement matrices made from ash from thermal activation of coal waste

  • Sánchez Vigil de la Villa, Isabel
  • García-Giménez, Rosario
  • Casas Angulo, Marina
  • Vigil de la Villa, Raquel
  • Ramirez-Fernández, Mario
  • Rubio, Virginia
  • Frías, Moisés
  • Martínez-Ramírez, S.
  • Fernández-Carrasco, Lucía
  • Vegas, Iñigo
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., One source of kaolinite-rich wastes is from mine tailings and the generation of enormous volumes of mine tailings waste is standard practice in this industry. These volumes of waste are, at present, dumped, provoking significant environmental impact and transforming the environment. The present investigation has the objective of expanding the knowledge on the behavior of new siliceous-aluminum minerals with pozzolanic activity, of added value in the manufacture of similar cements. We have proceeded to XRD and SEM/EDX analysis of the phases after temperature activation 600ºC/2 hours of the coal (kaolinite and micas) from the tailings waste and react, after 1 to 360 days, with a fixed amount of lime. Predominant phases are: hydrated monosulfoaluminate (from 1 day as a consequence of the reaction between the reactive alumina of the pozzolan, the sulfate ions of the coal waste and portlandite); tetracalcium hydrated aluminate (as traces at short reaction times increasing lightly, at 28 and 90 days); LDH compounds (from the beginning reaction and are the predominant phase at 7 days); stratlingite from 7 days and is the major phase to old ages of pozzolanic reaction. Laminated silica-rich microaggregates with very porous surfaces are detected, on which sponge-like C-S-H gels type I are deposited. The hydrated phases have laminar forms with a wide range of sizes, and are intergrown with the gels forming aggregates., This research has been supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund Project BIA-2015-65558-C3-1,2,3-R) (MINECO/FEDER) and as well as the Spanish Training Program, co-financed by the European Social Fund (MINECO/FSE) (BES-2016-078913 and BES-2016-078454). The authors are also grateful to the S.A. Hullera Vasco-Leonesa, SIKA (Spain) and to IECA for their assistance with this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Characterization and behaviour of eco-efficient cement matrices produced with kaolinite-based wastes as a future alternative pozzolan

  • Frías, Moisés
  • Vigil de la Villa, Raquel
  • García-Giménez, Rosario
  • Martínez-Ramírez, S.
  • Fernández-Carrasco, Lucía
  • Vegas, Iñigo
  • Caneda-Martínez, Laura
  • Asensio, Eloy
  • Sánchez de Rojas, María Isabel
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., Industrial wastes reutilization as secondary raw materials is considered a priority in the Circular Economy strategy. Cement industry is capable of absorbing large amounts of industrial wastes as active additions. Over the last years, research based on the study of alternative pozzolans to replace the traditional ones has been on a rising trend, among which production of recycled metakaolinite from industrial wastes must be remarked. This has a significant repercussion in the sustainability of the cement sector, socio-economic development and important environmental benefits. This work addresses the behaviour of cement pastes in which cement was partially replaced by coal waste (20%), once activated thermally at 600oC for 2 hours. Characterization of the coal waste, reaction kinetics and its influence on the blended cement behaviour has been conducted, mainly in the evaluation of rheological and mechanical properties compared with the requirements established by the current European Standard EN 197-1. Additionally, the behaviour of the blended pastes under an aggressive CO2 environment has also been assessed. The results show that the activated carbón residue is an ideal alterative way to obtain reactive metakaolinite, generating gels CSH, structures LDH / carbo-aluminate and C4AH13 at 90 days. The 20% addition percentages comply with the requirements for CEM II / A cements and, finally, present a chemical resistance to CO2 similar to the matrix of reference cement., This work was funded by the Spanish Ministries MINECO (BIA-2015-65558-C3-1,2,3-R) and MICIU (RTI2018-097074-B-C21) and the European Regional Development Fund (FEDER), as well as by the Spanish Training Program (MINECO) and the European Social Fund (FSE) (BES-2016-078454). The authors would also like to thank the Spanish Cement Institute (IECA), SIKA (Madrid, Spain) and Spanish Association of Construction and Demolition Waste recycling (RCDA) for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Activation of kaolinite based coal waste: Chemical and thermal activation and their mineralogy

  • Casas Angulo, Marina
  • García-Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Caneda-Martínez, Laura
  • Martínez-Ramírez, S.
  • Frías, Moisés
  • Vegas, Iñigo
Trabajo presentado a la 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials (WASCON), celebrada en Tampere (Finlandia) del 6 al 8 de junio de 2018., One inconvenience presentad by the thermal activation of kaolinite(K)-based waste is its low content of metakaolinite, a highly pozzolanic product listed in current standards for the manufacture of commercial cements. The addition of a chemical activator during the thermal activation process is a priority line of research to increase the reactivity of the recycled metakaolinite. The objective of the present investigation is to analyze the combined effect of the activation of a K-based coal waste on pozzolanic reactivity and on the evolution of mineralogical phases in a metakaolínitellime system cured at 1, 3, 7, 28, 90 and 360 days of reaction time. To do so, activation temperaturas between 550°C and 650°C were analyzed as well as percentages of ZnO between 0.05 and 3.0% by sample weight. In this paper, an additional chemical activator, ZnO, is studied and its effect on both pozzolanic properties and the evolution of mineralogical phases in the thermal activation of coal waste with a reaction time of up to 360 days in the pozzolanllime system. To do so, activation temperaturas of between 550°C and 650°C were selected and additions of chemical activator (ZnO) in percentages of 0.0%-3.0% by weight of coal waste, because it is an activator with a positive effect on a 100% natural kaolinite. Different techniques were used for the material characterization. Mineralogical composition of the bulk samples was determinad by XRD. The mineralogical quantification was performed with the Rietveld method. Morphological observation and microanalyses of the samples were carried out by SEM/EDX. A confocal Renishaw lnvia Raman microscope equipped with a Leica microscope and an electrically refrigerated CCD camera was used for sample analy sis. The FTIR analyses determinad the spectra in the range of compressed frequencies of between 4000 and 400 cm-1. The results showed that the incorporation of ZnO highly reduces the reactivity of the recycled metakaolinite and in consequence, the capacity of the metakaolinite to react with the surrounding lime; even more so when the content of added chemical activator was raised. In none of the cases under analysis was the chemical activator able to significantly improve the properties of metakaolinite in comparison with those of the reference. Thermal activation (550°C-650°C) without the addition of ZnO maintained a very similar mineralogy. The crystalline hydrated phases that appeared in the pozzolanic reaction were tetracalcium aluminate hydrate, stratlingite, ettringite, monosulfoaluminate hydrate and LDH (phyllosilicate/carbonate). The laminar morphological compounds were formed to the detriment of the C-S-H gels that acted as a substrate for crystallization and were found interspersed with them, forming aggregates., This research has been supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund Project BIA-2015-65558-C3-1,2,3-R) (MINECO/FEDER) andas well as the Spanish Training Program, co-financed by the European Social Fund (MINECO/FSE) (BES-2016-078913 and BES-2016-078454). The authors are also grateful to the S.A. Hullera Vasco-Leonesa, SI KA (Spain) and to lECA for their assistance with this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cements based on kaolinite base waste

  • García Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Frías, Moisés
  • Martínez-Ramírez, S.
  • Vegas, Iñigo
  • Fernández-Carrasco, Lucía
Resumen del póster presentado a la EGU (European Geosciences Union) General Assembly, celebrada en Viena (Austria) del 8 al 13 de abril de 2018., The cement industry is of high-energy consumption, being able to generate high CO2 emissions into the atmo- sphere. Environmental concerns can be solved by replacing part of the Portland cement clinker with pozzolanic materials in mortars and concrete. Slag, fly ash or silica fume are materials used for the planned replacement. Research studies based on clay minerals, as kaolinite, are being followed with special attention from the scientific community of the cement industry. It is well known that these minerals require an activation process to transform kaolinite (K) into metakaolinite (MK). The production of MK reduces the amount of energy used and CO2 emissions. MK is an amorphous material from the transformation of K, with a high pozzolanic activity, that is, its capacity to react with the portlandite released during the hydration of Portland cement, generating compounds such as C-S-H gels and some aluminum-phase hydrates. The main mineralogical compounds obtained as results of pozzolanic reaction are hydrated calcium aluminate and hydrated calcium carboaluminate. In developed countries, either because the availability of these by-products or transport are expensive, pre- viously calcined clay clays are used, since it is an abundant material and an alternative as a pozzolanic addition. The current use of cementitious materials for eco-efficient cements is based on industrial waste. The clay is the most reactive state to activate the material by temperature since it produces a destruction of the structures initiating by the elimination of the hydroxyl groups of the laminar bridges. One of the MK production methods is the heat treatment controlled from kaolinite at temperatures in the range of 600º/900ºC. The activation of industrial waste with a kaolinitic base is a way to obtain reactive MK from different sources such as calcined paper sludge, calcining waste from laundries in coal mines, sludge generated in drinking water treatment plants. The reuse of this sludge as a pozzolanic addition in the manufacture of eco-efficient cements is an alternative to their elimination, due to their silicoaluminous properties. Due to its good behaviour as future eco-efficient additions, this research is a study by FRX, XRD and SEM / EDX of their influence on the performances of blended cement mixtures (binary and ternary one), with substitutions of pozzolan ratio at 28 days of hydration. Porosity of pozzolanic cements decreases because of the formation of hydrated phases during pozzolanic reaction. Due to the reduction of pores, because of the growing of the hydrated compounds that have hydraulic properties, the compressive strength increases., The authors wish to express their gratitude and sincere appreciation to the Spanish Ministry of the Economy and Competitiveness under coordinated projects BIA2015-65558-C3-1-2-3R (MINECO/FEDER) for financing this research work and grateful to the Sociedad Anónima Hullera Vasco-Leonesa (Spain) and to the Spanish Cement Institute (IECA) for their assistance with this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cementos eco-eficientes elaborados con residuo de la minería de carbón: comportamiento y propiedades

  • Caneda-Martínez, Laura
  • Frías, Moisés
  • Sánchez de Rojas, María Isabel
  • Asensio, Eloy
  • Medina, César
Resumen del trabajo presentado a las I Jornadas de Jóvenes Científicos en Materiales de Construcción, celebradas en la Universidad Carlos III de Madrid del 18 al 19 de junio de 2018., Los autores agradecen al MINECO-FEDER (BIA-2015-65558-C3-1,2,3-R) y al Subprograma Estatal de Formación/FSE (BES-2016-078454) por su financiación, así como a la Sociedad Anónima Hullera Vasco-Leonesa, Sika (Madrid) y el IECA por su apoyo en este trabajo., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Coal mining waste: an alternative for the design of metakaolinite-based eco-efficient cements

  • Frías, Moisés
  • Caneda-Martínez, Laura
  • García-Giménez, Rosario
  • Vigil de la Villa, Raquel
  • Martínez-Ramírez, S.
  • Fernández-Carrasco, Lucía
  • Vegas, Iñigo
  • Sánchez de Rojas, María Isabel
Trabajo presentado a la International Conference on Construction Research / Eduardo Torroja: Architecture, Engineering, Concrete (AEC), celebrada en el Instituto de Ciencias de la Construcción Eduardo Torroja (IETCC-CSIC) del 21 al 23 de noviembre de 2018., [EN]: Clay-based materials of kaolinitic nature have been attracting attention as raw material for metakaolinite production and its subsequent use as supplementary cementitious material. However, exploitation of kaolinite deposits implies a serious environmental and landscape impact, which has prompted an interest in the search for alternative sources. In this work coal mining waste is proposed as raw material for the production of recycled matekaolinite, which would improve the sustainability and the cost of the process, encouraging at the same time the reuse of waste and therefore promoting a circular economy. To this end, the suitability of the waste as supplementary cementitious material was evaluated in a lime/waste system, finding a pozzolanic activity comparable to that exhibited by commercial metakaolinite. Accordingly, pastes and mortar specimens were prepared where 20 and 50% of cement was replaced by coal mining waste, and their mechanical and physical properties were measured. Additionally, an assessment of their resistance against 10% CO2 exposure was conducted., [ES]: Los materiales arcillosos de naturaleza caolinítica han despertado un gran interés en los últimos tiempos como materia prima para la producción de metacaolinita y su posterior uso como adición puzolánica al cemento. No obstante, la explotación de yacimientos de caolinita lleva asociada un importante impacto medioambiental y paisajístico, lo que ha impulsado la búsqueda de fuentes alternativas para su obtención. En este trabajo se propone la reutilización de residuos industriales procedentes de la minería del carbón para la producción de metacaolinita reciclada. De esta forma se mejoraría la sostenibilidad y el coste del proceso, fomentando al mismo tiempo el reciclaje de residuos y contribuyendo a la Economía Circular. Con este objetivo, se ha evaluado la aptitud del residuo como adición puzolánica en un sistema residuo/cal, encontrándose para el mismo una actividad puzolánica comparable a la mostrada por metacaolinitas comerciales. A continuación se ha estudiado el efecto de la adición del residuo sobre las propiedades físicas y mecánicas en pastas y morteros con sustituciones parciales de cemento del 20 y 50 %. Finalmente, se han investigado la resistencia de estos materiales frente a un ambiente de 10% de CO2., Este trabajo ha sido financiado por el Ministerio de Economía y Competitividad y el Fondo Europeo de Desarrollo Regional (MINECO/FEDER) [ref. BIA-2015-65558-C3-1,2,3-R], así como por el Subprograma Estatal de Formación y el Fondo Social Europeo [BES-2016-078454]. Los autores agradecen también a la Sociedad Anónima Hullera Vasco-Leonesa, SIka (Madrid) y al IECA por el apoyo recibido.