Pasar al contenido principal

AVANCES EN CIENCIA Y TECNOLOGIA DE CEMENTOS HIBRIDOS- SOSTENIBLES

BIA2016-76466-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of alkali concentration on the activation of carbonate-high illite clay

  • D’Elia, Angela
  • Pinto, Daniela
  • Eramo, Giacomo
  • Laviano, Rocco
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
This article belongs to the Special Issue Low Binder Concrete and Mortars., The present study explores the effect of activating solution concentration (4, 6 and 8 M NaOH) on mechanically and thermally pre-treated carbonate-high illite clay (LCR). Pastes were prepared with an alkaline solution/clay (S/B) ratio of 0.55, which were cured at room temperature and relative humidity > 90% in a climatic chamber. At two and 28 days, compressive mechanical strength was determined, and the reaction products were characterised by X-ray Powder Diffraction analysis (XRPD), Fourier-transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy - Energy Dispersive X-ray spectroscopy (SEM/EDX). Results obtained showed that the presence of reactive calcium in the starting clay induces co-precipitation of a mix of gels: An aluminium-enriched C-S-H gel (C-A-S-H) and a N-A-S-H gel, in which sodium is partially replaced by calcium (N,C)-A-S-H. Pastes prepared with higher (6 or 8 M) activator concentrations exhibit a more compact matrix than the ones prepared with 4 M NaOH. The findings show that the use of a 6 M NaOH solution yields a binder with two days compressive strength >20 MPa and 28 days strength of over 30 MPa., The research was also partially funded by the Spanish Ministry of the Economy, Industry and Competitiveness and ERDF under project BIA2016-76466-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid binders: A journey from the past to a sustainable future (opus caementicium futurum)

  • Palomo, Ángel
  • Monteiro, P.
  • Martauz, P.
  • Bílek, Vlastimil
  • Fernández-Jiménez, Ana
This article describes and interprets data drawn from a thorough characterisation of a series of cementitious materials. The materials addressed can be divided into three major groups: 1) cements/concretes from well-known and historically documented Roman constructions in Italy; 2) cements recently prepared in the laboratory simulating the compositions of Roman cements, stored for 6 months in environmental conditions similar to those to which the Roman materials have been exposed for 2000 years; 3) concretes prepared from an industrial cement manufactured 6 years ago applying today's knowledge of hybrid cements. An analysis of all the data presented in this article has led its authors to conclude that, conceptually speaking, ancient Roman cements can be identified with modern hybrid ‘portland-alkaline’ materials. That conceptual identity is based on the detection of the same cementitious phases in the two types of cements (Roman and Hybrid) and naturally of the inclusion of alkalis in the structures of some of the phases observed., Data acquired at beamlines 5.3.1 and 8.3.2 at the Advanced Light Source at the Lawrence Berkeley Laboratories, Berkeley, California, were supported by the Director of the Office of Science, Department of Energy, under Contract DEAC02-05CH11231. Angel Palomo and Ana Fernández-Jiménez acknowledge the financing support for the research from Ministerio de Ciencia, Innovación y Universidades and FEDER under research projects BIA2016-76466-R and RTC2016-4872-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical-chemical activation of coal fly ashes: An effective way for recycling and make cementitious materials

  • Fernández-Jiménez, Ana
  • García-Lodeiro, Inés
  • Maltseva, O.
This paper is wholly committed to resource efficiency through the valorization of waste from other industries, and more specifically fly ash as a raw material to produce concrete-like geopolymers. In particular, this study aimed to determine the effect of the physical and chemical characteristics of recycled coal fly ash used to manufacture alkaline cement on reaction kinetics and product microstructure and performance. The ash was mixed with 8 M NaOH and cured for 20 h at 85°C and RH > 90% to form a compact paste, after which mechanical strength was determined and the reaction rate was calculated using isothermal conduction calorimetry. The findings showed that vitreous content (SiO2/Al2O3), reactive and (especially) fineness play a very important role in both the development of cement mechanical strength and the composition and structure of the reaction products formed., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2013-43293-R, BIA2016-76466-R, and RTC2016-4872-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Studies about the hydration of hybrid “alkaline-belite” cement

  • Sánchez-Herrero, M. J.
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
The mechanical performance of a hybrid cement containing 48% fly ash, 48% mineralized belite clinker, 1. 5% gypsum and 2.5% Na2SO4 was analyzed and the hydration products were identified. The findings showed that the newly designed cement met European standard EN 197-1 compositional, mechanical and setting time requirements (cement type IVB). The hydration products forming in this blended “alkaline-belite” cement (as it was determined through XRD, 29Si and 27Al MAS NMR and electron microscopy) consisted in a mix of cementitious gels: C-(A)-S-H and N-(C)-A-S-H, which interacted and over time evolved toward the latter with no detriment to the mechanical strength developed by the cement., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2016-76466-R and RTC2016-4872-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can calcium aluminates activate ternesite hydration?

  • Montes, Myriam
  • Pato, Esther
  • Carmona-Quiroga, Paula
  • Blanco-Varela, María Teresa
Aluminum hydroxide (AH3) has recently been shown to be able to activate hydration in ternesite, a phase found in some calcium sulfoaluminate (CSA) cements. This study explored the capacity of a number of calcium aluminates (C3A, C12A7, CA and C4A3) to activate ternesite hydraulic reactivity. After laboratory synthesis, the aluminates were blended with ternesite at a ratio of 1:2 and their hydration was monitored with isothermal conduction calorimetry for 7 days at 25 °C. The resulting pastes were analysed with XRD, FTIR and DTA. The presence of ternesite in the pastes altered the aluminate heat flow curves, shortening the induction period and bringing the reaction peak forward, an indication of hastened hydration. Ternesite also altered the reaction products, which included calcium monosulfoaluminate hydrate and strätlingite., This paper has been funded from BIA2016-76466-R project as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914). Authors thank to Ministerio de Economía y Competitividad the young researcher contract given to Myriam Montes. Financial support for Dr. Paula M. Carmona-Quiroga's participation was provided by the Spanish Ministry of the Economy and Competitiveness under project BIA2015-73237-JIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid alkaline cements: Bentonite-Opc binders

  • García-Lodeiro, Inés
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
This article belongs to the Special Issue Geopolymers., Moderately alkaline activators can be used to formulate cementitious binders with a high Supplemetary Cementitious Materials (SCMs) and a low portland cement content (hybrid alkaline cements). This study aimed to prepare hybrid alkaline cements containing large percentages of dehydroxylated bentonite (BT) and small Portland cement (OPC) fractions, with 5% Na2SO4 as a solid alkaline activator. The hydration kinetics of the pastes hydrated in water in the presence and absence of the solid activator were assessed by isothermal conduction calorimetry, whilst the reaction products were characterised with X-Ray Powder Diffraction (XRD) and Fourier-transform Infrared Spectroscopy (FTIR). The presence of the alkaline activator hastened OPC and BT/OPC hydration: more heat of hydration was released, favouring greater initial bentonite reactivity. The portlandite forming during cement hydration reacted readily with the Na2SO4, raising medium alkalinity and enhancing bentonite dissolution and with it reaction product precipitation (primarily (N,C)-A-S-H-like gels that co-exist with C-S-H- or C-A-S-H-like gels). The presence of sulfate ions favoured the formation of AFm-like phases. Preceding aspects accelerated the hydration reactions, with the formation of more reaction product and matrix densification. As a result, the 28 days Na2SO4 activated systems developed greater mechanical strength than the water-hydrated systems, with the 60% BT/40% OPC blends exhibiting higher compressive strength than the 100% OPC pastes., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2016-76466-R and RTC2016-4872-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydration mechanisms of hybrid cements as a function of the way of addition of chemicals

  • Fernández-Jiménez, Ana
  • García-Lodeiro, Inés
  • Maltseva, O.
  • Palomo, Ángel
In this study fly ash contents of up to 50% were used to produce binders with mechanical strength greater than or equal to type CEM I 42.5R cement (reference). The specific aim pursued in this research was to determine whether the procedure used to add the chemical activator (in solid or liquid form) can affect strength development in the cement or the nature of the reaction products formed. Two experimental procedures were deployed: (a) the chemical activator was dissolved in the mixing water; (b) the chemical activator was ground, as a solid, into the fly ash. The solid‐state method induced slightly higher mechanical strength than when the activator was dissolved in hydration water. The way the chemical activator was added affected not only early age reaction kinetics, but also the nature and composition of the reaction products, the liquid state favoring the formation of phases AFt and AFm., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2016‐76466‐R and RTC2016‐4872‐S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reuse of waste sandstone sludge via alkali activation in matrices of fly ash and metakaolin

  • Clausi, Marina
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
  • Tarantino, Serena C.
  • Zema, Michele
This work aims at investigating the possibility of reusing sludge from sandstone sawing in alkaline cements. In particular, the behaviour towards alkali activation process of Pietra Serena sludge (sPS), either alone or in binary mixtures with class F fly ashes and metakaolin, was evaluated. The binders were synthesised with 8 M and 12 M NaOH solutions and cured at 85 °C for 5 or 20 h. Mechanical strength was determined after one day and the reaction products were characterized by XPRD, FTIR and SEM/EDX. Also colorimetry tests were performed. The alkali activation of sPS gives a material with limited amount of amorphous gel, in which unreacted particles can be still recognized, and showing a compressive strength of 3.6(2) MPa. The use of fly ashes and metakaolin in different proportions enhances mechanical strength up to 36(2) MPa. In these blends, the sludge acts basically like a filler. However, calcium carbonates present on the sludge partially dissolve and react in the alkaline mixture favouring the formation of some local high-calcium, high Si/Al ratio (C-A-S-H-type gel) areas co-existing with N-A-S-H-type gel., MC has been supported by Ministero dell’Istruzione, dell’Università e della Ricerca scholarship (Fondo per il sostegno dei giovani). This research was also funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects, BIA2016-76466-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of clays in alkaline hybrid cement preparation. The role of bentonites

  • García-Lodeiro, Inés
  • Boudissa, Nassima
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
‘Portland-alkaline’ hybrid cements (HYC), the latest generation of alkaline cements, are multi-component systems consisting in blends with high mineral addition and low portland cement contents. In the presence of alkaline activators, these systems set and harden into materials with excellent cementitious properties. This study explored the 2 and 28 day mechanical strength of a series of hybrid cements comprising blends with different proportions of portland cement (OPC) and dehydroxylated bentonite (BT). The reaction products were characterised with XRD and BSEM/EDX. The presence of an alkaline salt activator hastened reaction product precipitation and favoured strength development., This study was funded by a research grant (BIA 2016-76466-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of alkalis content on calcium sulfoaluminate (CSA) cement hydration

  • Tambara Jr, L.U.D.
  • Cheriaf, Malik
  • Rocha, J. C.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
The behavior of sulfoaluminate (CSA) cements hydrated in neutral or alkaline solutions (0 M, 0.1 M, 1 M, 4 M and 8 M NaOH) was studied. 2-d, 28-d and 90-d mechanical strengths were determined, as well as the reaction rate by isothermal conduction calorimetry. The reaction products were characterised with XRD, DTA and SEM. The findings revealed differences in performance depending on whether hydration transpired at pH ≤ 14 (0.1 and 1 M) or pH > 14 (4 M and 8 M). To 0.1 M and 1 M, there is an improvement of mechanical strength than in water-hydrated pastes. The majority reaction products in these conditions were ettringite and microcrystalline aluminium hydroxide. Mechanical strength was lower in the high alkalinity (4 M and 8 M) than in the reference pastes, mainly due to the formation of different reaction products. Ettringite was unstable at 4 M and failed to form at 8 M, whilst thenardite and U-phase were detected in the 28d and later materials hydrated at both concentrations., This study was partially supported by the Brazilian National Council for Scientific and Technological Development (CNPq) under project 208380/2017-5, and CAPES. Financial support for this study was also furnished by the Spanish Ministry of the Economy and Competitiveness and FEDER under research project BIA2016-76466-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Replacing fly ash with limestone dust in hybrid cements

  • Millán-Corrales, G.
  • González-López, J. R.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
This study explored the effect of adding 10% of finely ground limestone dust to alkaline hybrid cements. A series of binders was prepared with 20–30% OPC (CEM I 52.5R) and fly ash in the presence or absence of a chemical activator (5% Na2SO4). The rate of heat release was determined by isothermal conduction calorimetry. Setting times and 3 d, 28 d and 90 d compressive strength were likewise found. The reaction products were characterised by XRD, DTA/TG and BSEM/EDX. The inclusion of 10% of limestone in the hybrid cements to replace the fly ash improved compressive strength and hastened hydration. The 28 d pastes containing 30% OPC, 10% limestone, 55% FA and 5% Na2SO4 developed compressive strength above 45 MPa., This study was partially supported by the Universidad Autonóma de Nuevo León and Mexico’s Consejo Nacional de Ciencia y Tecnología (CONACYT), which funded Eng. G. Millán’s residency as an Engineering PhD. student (with Orientation in Construction Materials) at the Eduardo Torroja Institute. Further funding was provided by the Spanish Ministry of the Economy and Competitiveness and FEDER (project BIA2016‐76466‐R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of industrial by-products as alkaline cement activators

  • García-Lodeiro, Inés
  • Cristelo, Nuno
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Alkaline (or geopolymer) cements have proven to be a sustainable alternative to the ordinary portland cement material. The laboratory reagents normally used as alkaline activators constitute the most costly and on occasion polluting constituents of such cementitious systems. This study aimed to explore the use of a disposed cleaning solution (CS), coming from the aluminium transformation industry, as an activator for high and low calcium aluminosilicate precursors. For that a Blast Furnace Slag (BFS) and a type F-Fly Ash (FA) were used. Precursors activated with a traditional NaOH solutions were used as a reference. Kinetics of reactions (isothermal calorimetry) were evaluated and mechanical strength of hardened pastes determined. The nature of the reaction products generated in this new systems were also identified by using XRD, FTIR, SEM and 29Si and 27Al MAS NMR. The findings showed that the CS can be effectively used to prepare cementitious materials, particularly when applied to CaO-SiO2-Al2O3 system precursors such as BFS, which require lower alkalinity than FA-based precursors. The nature of the reaction products generated in the CS alkali activated systems was similar than those observed in the reference systems, however Al richer reaction products were observed in the former., This research was funded by the Spanish Ministry of Science, Innovation and Universities under project BIA2016-76466-R and ERDF under project RTC2016-4872-S (principal investigators Angel Palomo and Ana Fernandez-Jimenez). In addition, thanks the project from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 734833., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnO Nanoparticles for Photocatalytic Application in Alkali-Activated Materials

  • Guzmán-Carrillo, H. R.
  • Manzano-Ramírez, Alejandro
  • García-Lodeiro, Inés
  • Fernández-Jiménez, Ana
This article belongs to the Special Issue Advances in Alkali-Activated Materials., This paper reports an Alkali-Activated Materials (AAM) using two different precursors, metakaolin and a metallurgical slag with photocatalytic zinc oxide nanoparticles, as novel photocatalytic composites. The photodegradation performance of the composites using methylene blue (MB) dye as a wastewater model was investigated by ultraviolet radiations (UV-vis) spectroscopy. Adsorption in dark conditions and photodegradation under UV irradiation are the mechanisms for removing MB dye. The pseudo-first-order kinetic and pseudo-second-order kinetic models were employed, and the experimental data agreed with the pseudo-second-order model in both cases with UV and without UV irradiations. As new photocatalytic materials, these composites offer an alternative for environmental applications., This research was partially funded by CONACyT (National Council for Science and Technology) grant number 397245 and by the Spanish Ministry of the Economy, Industry and Competitiveness and ERDF under project BIA2016-76466-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Calcium, Porous, Alkali-Activated Materials as Novel pH Stabilizers for Water Media

  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Due to the increase of water consumption, water treatment systems become more actual and innovative materials for water treatment are welcomed. Traditionally, alkalizing agents, such as lime or caustic soda, have been employed to increase the pH levels, which induce chemical clarification of wastewater. Some innovative ideas of using low-calcium, alkali-activated materials (AAM) for this purpose have been considered previously. In this study, the low-calcium, porous, alkali-activated material (pAAM) was characterized to understand the impact of the aluminum silicate source and heat treatment on basic properties for material that might be used in water treatment systems as a softener by stabilizing the pH. The studied porous alkali-activated materials may ensure stable and long-lasting (30 days) pH (pH 10.3¿11.6) in water media depending on the composition and amount of activation solution used for AAM preparation. Heat treatment does not have an impact on the mineralogical composition and structural properties of the pAAM, but it does change the leaching ability of alkalis from the material structure., Ministry of Economy, Industry and Competitiveness of Spain under the project [BIA2016-76466-R], Riga Technical University (Latvia) Erasmus+ projects [No 2016-1-LV01-KA103-022512 and No 2015-1-LV01-KA103-013255], and Riga Technical University’s Doctoral Grant Program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monitoring early hydration of calcium sulfoaluminate clinker

  • Padilla Encinas, Pilar
  • Palomo, Ángel
  • Blanco-Varela, María Teresa
  • Fernández-Carrasco, Lucía
  • Fernández-Jiménez, Ana
Initial hydration and setting were continuously monitored in calcium sulfoaluminate clinker (KCSA) mixed with water or 2 M NaOH with isothermal conduction calorimetry, ultrasonic pulse velocity (UPV) measurement, the Vicat apparatus, and (in- and ex-situ) X-ray diffraction. P-wave acceleration (ap) proved highly useful to detect very rapid initial reactions, not generally perceptible with other techniques. Setting in the water-hydrated KCSA pastes was mediated by ettringite formation. Flash setting due to calcium aluminate hydrate precipitation was observed in the 2 M NaOH-hydrated clinker. Ye'elemite reacted most intensely at later times in both pastes, inducing AFt and AH precipitation and the formation of smaller proportions of other calcium aluminate hydrates that densified the matrix., This research was developed thanks to the support of the Min-istry of Science and Innovation and Universities and FEDER fundsthat subsidize the Project BIA2016-76466-R and the aid BES-2017-082022. In addition, the PhD student Pilar Padilla-Encinas, thanks to the University Autónoma of Madrid, to be able to carryout her thesis in the Applied Chemistry program
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of alkaline salts on calcium sulfoaluminate cement hydration

  • Urbano Durlo Tambara Júnior, Luís
  • Rocha, Janaíde C.
  • Cheriaf, Malik
  • Padilla Encinas, Pilar
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
This work analyzes the effect of the presence of 5 wt.% of solid sodium salts (NaSO, NaCO, and NaSiO) on calcium sulfoaluminate cement (CSA) hydration, addresses hydration kinetics; 2-, 28-, and 90-d mechanical strength, and reaction product microstructure (with X-ray diffraction (XRD), and Fourier transform infrared spectroscopy, (FTIR). The findings show that the anions affect primarily the reactions involved. Ettringite and AH, are the majority hydration products, while monosulfates are absent in all of the samples. All three salts hasten CSA hydration and raise the amount of ettringite formed. NaSO induces cracking in the ≥28-d pastes due to posthardening gypsum and ettringite formation from the excess SO present. Anhydrite dissolves more rapidly in the presence of NaCO, prompting carbonation. NaSiO raises compressive strength and exhibits strätlingite as one of its reaction products., This study was partially supported by the Brazilian National Council for Scientific and Technological Development (CNPq) under projects 208380/2017‐5 and 151890/2020‐0, and CAPES. Financial support was also furnished by the Spanish Ministry of the Economy and Competitiveness and FEDER under research project BIA2016‐76466‐R and funding from BES‐2017‐082022. PhD. student Pilar Padilla‐Encinas thanks the Autonomous University of Madrid for the opportunity to complete her thesis in its Applied Chemistry program. The cement supplied by Heidelberg Cement Hispania is gratefully acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Up to 100% Replacement of Natural Materials from Residues: Recycling Blast Furnace Slag and Fly Ash as Self-Leveling Cementitious Building Materials

  • Torrens-Martín, David
  • Fernández-Carrasco, Lucía
  • Blanco-Varela, María Teresa
The objective of this research is to study the use in the construction industry of recycled slag (SL) and fly ash (FA) using from 0.1 to 5% calcium sulfate (wCS¯). These wastes have been used to make ternary mixture systems and evaluated in terms of technological properties as cementitious materials for building applications. Studying their micro-structure as hydration products, setting times and mechanical properties shows a way to develop new mixtures from high proportion of waste, which are alternatives to the traditional nature ternary systems: Portland cement (PC), calcium aluminate cement (CAC) and calcium sulphate (CS¯). Based on previous work with natural products, the selected SL/FA ratios were 9 and 2.3 and the sulphate contents were 0, 1 and 5%. The water/binder ratio used for these cementitious mixes was 0.4. The specimens prepared for strength determination were prisms of 10 × 10 × 60 mm. The pastes were prepared and cured at 20 °C and 98% relative humidity for 1 day and then either stored at 20 °C at 98% humidity (dry) or immersed in distilled water (wet) for 14 and 28 days. The results showed that both FA and SL mixed with CS¯ produce ettringite after 28 days of setting, and this phase was the main crystalline hydrated product in all mixes. Calcium sulphate stimulates the hydration reactions of the mixes and the strength increases when the CS¯ content is higher due to ettringite formation, while the setting time decreases, as happened in the systems prepared with natural materials., Funding for this study was provided by the Agaur 2017 SGR 29 I+D+I project and the MICINN (Ministerio de Ciencia e Innovación) for supporting this research through the BIA 2016-76466R project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Na versus Ca Sulfate Salts on the Hydration of Calcium Sulfoaluminate Clinker

  • Padilla Encinas, Pilar
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
This paper examined how the amount (5% or 20%) and type (CaSO or NaSO) of sulphate salt affect the hydration of calcium sulphoaluminate clinker (KCSA). The mechanical behavior of the pastes was determined at 1, 3, 28, and 90 days, the heat flow and total heat were measured with isothermal conduction calorimetry, and the reaction products were characterized using X-ray diffraction (XRD), differential thermal analysis/thermogravimetry (DTA/TG) and scanning electron microscopy (SEM). The results obtained indicated that both the amount of sulphate salt (5% or 20%) and its type (CaSO or NaSO) affect the hydration kinetics, type of reaction products formed, and development of mechanical strength. The incorporation of CaSO has a positive effect on the development of the mechanical strength of KCSA. However, NaSO can also produce adverse side effects at older ages. The presence of NaSO increases pH values, which partly destabilizes the ettringite formed, thereby favoring carbonation and thenardite precipitation, which can cause the specimens to crack and break., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of alkalinity on early-age hydration in calcium sulfoaluminate clinker

  • Padilla, Patricio
  • Fernández Carrasco, Lucía
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana
Early-age hydration with neutral or alkaline (0 M to 8 M) solutions was studied in calcium sulfoaluminate clinker (CSA) using isothermal conduction calorimetry, X-ray diffraction (both continuous and discontinuous, i.e., after detaining hydration with isopropanol) and infrared spectroscopy. Hydration in 0.1 M NaOH was observed to be similar to hydration in water. At the next highest concentration studied (1 M), however, the reaction rate was slower, due primarily to lower AFt stability in that medium. Faster hydration but less total heat was observed in the pastes hydrated with 2 M NaOH, a finding associated with the presence of a metastable compound, U-phase, that subsequently transitioned to AFt, C3AH6 and thenardite. Hydration with highly alkaline (4 M and 8 M) solutions inhibited AFt formation completely, although ye'elimite reacted more vigorously (particularly with 8 M NaOH) to form katoite, AH3 and thenardite., Funding for this study was provided by the Spanish Ministry of Science, Innovation and Universities and ERDF under project BIA2016-76466-R and grant BES-2017-082022. PhD. student Pilar Padilla-Encinas benefited from the support of the Universidad Autónoma of Madrid to perform the research for her thesis through the IETcc's Applied Chemistry Programme. The cement supplied by HeidelbergCement Hispania is gratefully acknowledged., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Up to 100% replacement of natural materials from residues: recycling blast furnace slag and fly ash as self-leveling cementitious building materials

  • Torrens Martín, David
  • Fernández Carrasco, Lucía
  • Blanco Varela, M.Teresa
The objective of this research is to study the use in the construction industry of recycled slag (SL) and fly ash (FA) using from 0.1 to 5% calcium sulfate (wCS¯). These wastes have been used to make ternary mixture systems and evaluated in terms of technological properties as cementitious materials for building applications. Studying their micro-structure as hydration products, setting times and mechanical properties shows a way to develop new mixtures from high proportion of waste, which are alternatives to the traditional nature ternary systems: Portland cement (PC), calcium aluminate cement (CAC) and calcium sulphate (CS¯). Based on previous work with natural products, the selected SL/FA ratios were 9 and 2.3 and the sulphate contents were 0, 1 and 5%. The water/binder ratio used for these cementitious mixes was 0.4. The specimens prepared for strength determination were prisms of 10 × 10 × 60 mm. The pastes were prepared and cured at 20 °C and 98% relative humidity for 1 day and then either stored at 20 °C at 98% humidity (dry) or immersed in distilled water (wet) for 14 and 28 days. The results showed that both FA and SL mixed with CS¯ produce ettringite after 28 days of setting, and this phase was the main crystalline hydrated product in all mixes. Calcium sulphate stimulates the hydration reactions of the mixes and the strength increases when the CS¯ content is higher due to ettringite formation, while the setting time decreases, as happened in the systems prepared with natural materials., Funding for this study was provided by the Agaur 2017 SGR 29 I+D+I project and the MICINN (Ministerio de Ciencia e Innovación) for supporting this research through the BIA 2016-76466R project. Special thanks to the Instituto de Ciencias de la Construcción “Eduardo Torroja”, where part of this work was developed. The corresponding author thanks the Miguel Casado Foundation for supporting his research career. The cement supplied by Ciments Molins is gratefully acknowledged., Peer Reviewed, Postprint (published version)