Pasar al contenido principal

SINTESIS DE MATERIALES CEMENTANTES SUPLEMENTARIOS VITREOS A BAJA TEMPERATURA

PID2019-111464RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alkali-Activated Binary Binders with Carbonate-Rich Illitic Clay

  • D’Elia, Angela
  • Clausi, Marina
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
  • Eramo, Giacomo
  • Laviano, Rocco
  • Pinto, Daniela
This work deals with the investigation of alkaline binders obtained from binary mixtures of carbonate-rich illitic clay from deposits in southern Italy and two industrial by-products with very different total composition and calcium content, i.e., blast furnace slag and type F fly ash, respectively. To improve the reactivity, the selected clay was ground in a ball miller and heated to 700 °C. The binary mixtures were alkali activated with NaOH solution at 4 M and 8 M, and the activated pastes were cured at room temperature and relative humidity >90% in a climatic chamber. Heat flow, total heat and compressive strength (2, 7 and 28 days) were determined. The hardened pastes were characterized by X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). Results show that the main reaction product in all samples is a gel or mixture of C-A-S-H/(N, C)-A-S-H type gel depending on the calcium content in the precursors. The paste, made up of a 1:1 weight proportion of carbonate-rich illitic clay and blast furnace slag, showed the formation of a more compact matrix than that observed in each individually activated component, achieving the considerable mechanical strength value of 45 MPa after 28 days, which suggests a very positive interaction between the two calcium-rich solid precursors. The binary mixture of carbonate-rich illitic clay and F fly ash showed relatively low compressive strength (below 15 MPa), which has been related to the poor reaction potential of fly ash regarding the alkali activation at room temperature. The modification of curing parameters is expected to improve the reaction of carbonate-rich illitic clay/fly ash blend. The clay activation method used in this study has been demonstrated to be suitable for larger scale industrial pre-treatment set-ups., The research financially supported by Italian Ministry of University and Research (MUR and by University of Bari A. Moro through the found Next Generation EU—MUR D.M. 737/2021 (grant S64—H91I21001710006—Horizon Europe Seeds), the Spanish Ministry of the Science and Innovation through funds FEDER (research projects PID2019-111464RB-I00) and by POR Puglia 2014/2020–Asse X–Azione 10.4 Research for Innovation (REFIN) (grant 93E5DCB6)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorisation of “La Palma” Volcanic Ash for Making Portland-Blended, Alkaline and Hybrid Portland–Alkaline Cements

  • Martín-Rodríguez, Pablo
  • Fernández-Jiménez, Ana
  • Alonso López, M. del Mar
  • Palomo, Ángel
  • García-Lodeiro, Inés
The present work evaluates the feasibility of using volcanic fly ash (VFA) generated by the eruption of the Tajogaite volcano on the island of La Palma (Spain) in 2021, as a precursor in the preparation of cementitious materials with different Portland cement (PC) replacement levels (0%, 30%, 70% and 100%), in the absence (Blended Cement, BC) and presence of an alkaline activator (Hybrid Alkaline Cement, HAC, and Alkaline Cements, AC). Hydration kinetics (isothermal conduction calorimetry), paste mechanical strengths and reaction products were characterised by XRD, FTIR, TG/DTG and BSEM/EDX. The results obtained indicate that the strengths developed by the hybrid alkaline cements (HAC) are higher than those of the blended cements (BC), especially at the age of 2 days, where 25 MPa were obtained with the replacement of 70% PC by VFA. Alkaline cements (AC, 100% VFA) that were prepared with 8 M NaOH solution as the activator reached 40 MPa after 2 days. It was observed that in all the binders, depending on the initial composition of the binder mixture and the percentage of replacement and/or activator, VFA reacts to form cementitious gels, C-A-S-H and N-A-S-H type, which supports its use as a mineral addition to blended cement or as a precursor in the preparation of alkaline and hybrid alkaline cements., The authors would like to thank the Spanish Ministry of Science and Innovation, the Spanish National Research Agency (AEI) and the FEDER funds that supported the research projects: PID 2019-111464RB-I00/AEI/10.13039/501100011033 (GlassyMat) JIN Projects 2021 PID2020-116738RJ-I00/AEI/10.13039/501100011033 (ENCAPCEM); and PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2020-091909/AEI/10.13039/501100011033) of Pablo Martin Rodriguez., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Na versus Ca Sulfate Salts on the Hydration of Calcium Sulfoaluminate Clinker

  • Padilla Encinas, Pilar
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
This paper examined how the amount (5% or 20%) and type (CaSO or NaSO) of sulphate salt affect the hydration of calcium sulphoaluminate clinker (KCSA). The mechanical behavior of the pastes was determined at 1, 3, 28, and 90 days, the heat flow and total heat were measured with isothermal conduction calorimetry, and the reaction products were characterized using X-ray diffraction (XRD), differential thermal analysis/thermogravimetry (DTA/TG) and scanning electron microscopy (SEM). The results obtained indicated that both the amount of sulphate salt (5% or 20%) and its type (CaSO or NaSO) affect the hydration kinetics, type of reaction products formed, and development of mechanical strength. The incorporation of CaSO has a positive effect on the development of the mechanical strength of KCSA. However, NaSO can also produce adverse side effects at older ages. The presence of NaSO increases pH values, which partly destabilizes the ettringite formed, thereby favoring carbonation and thenardite precipitation, which can cause the specimens to crack and break., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of NaOH molarity on the formation of hybrid cements from sulfate-bearing clay and Pietra Serena sludge

  • Occhipinti, Roberta
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
  • Tarantino, Serena C.
  • Riccardi, Maria P.
  • Clausi, Marina
  • Zema, Michele
A sulfate-bearing kaolinitic clay and sludge deriving from Pietra Serena sandstone cultivation have been used to synthesize binary (80/20, 50/50) alkali cements. NaOH solutions 4,6 and 8 M were used as activators to determine the effect of alkalinity on the hydration products. The results show that mechanical strength increases linearly with the pH of the activator. Lower molarity favors the formation of ettringite and calcium-silicate-hydrate/calcium-aluminum–silicate-hydratecompounds; higher molarity favors monosulfate and cancrinite/sodalite zeolites. Both systems can retain sulfate. The occurrence of ettringite and monosulfate in the early stage of the reaction together with the cementing gel could be enough to enhance the strength with a milder alkaline activation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanism for activity variation of landfilled coal ash: Deterioration in landfilling and improvement in pretreatment

  • Xiong, Luchang
  • Maltseva, O.
  • Fernández-Jiménez, Ana
  • Wan, Zhijun
  • Palomo, Ángel
Landfilled coal ash (LA) may serve as an alternative to fly coal ash (FA) as a stable and abundant supplementary cementitious material (SCM), particularly given the gradual phasing out of coal-fired power plants in many developed regions. This study investigates the physicochemical properties of fresh FA, original LA (OLA), mechanochemically activated LA (GLA), and negative-pressure sieved LA (SLA). Additionally, it evaluates the potential activity of LA and the fundamental properties of LA-based blended cements produced with different pretreatment methods. The results show that long-term landfilling significantly reduces LA activity. The primary causes of this deterioration are macroscopic impurity contamination and microscopic partial reactions. Both mechanochemical activation and negative-pressure sieving pretreatments can improve LA activity and optimize the fundamental properties of LA-based blended cements through particle modification and particle selection, respectively. Owing to their distinct mechanisms for improving activity, blended mortars prepared with GLA exhibit improved water demand and strength performance compared to those made with SLA. This study contributes to the theoretical foundation for the resource utilization of landfilled coal ash, and provides potential option for pozzolanic materials in thermal coal plant closing areas., The authors would like to acknowledge the financial support from Ministerio De Ciencia, Innovación y Universidades, España (Project No.: PID2019-111464RB-100) and China Postdoctoral Science Foundation (Project No.:2024M763561)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín Rodríguez, Pablo
  • Garcia Lodeiro, María Inés
  • Fernández Carrasco, Lucía|||0000-0002-2379-3782
  • Blanco Varela, M.Teresa
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana María
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (~20 % CaO and SiO2/CaO˜ 3 and SiO2/Al2O3˜ 3). Three temperatures of synthesis were tested: 1000°C, 1100°C and 1250°C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000°C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesised at 1000 and 1100°C (amorphous content < 70%), a (N,C)-A-S-H type gel was formed, as the main product of Hydration. However, in those cements made with precursors synthesised at 1250 °C (amorphous content = 99%), a mixture of (N)-C-A-S-H and (N,C)-AS-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/ 501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/ AEI/10.13039/50110001033., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín Rodríguez, Pablo
  • Garcia Lodeiro, María Inés
  • Fernández Carrasco, Lucía
  • Blanco Varela, M.Teresa
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana María
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (~20 % CaO and SiO2/CaO˜ 3 and SiO2/Al2O3˜ 3). Three temperatures of synthesis were tested: 1000°C, 1100°C and 1250°C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000°C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesised at 1000 and 1100°C (amorphous content < 70%), a (N,C)-A-S-H type gel was formed, as the main product of Hydration. However, in those cements made with precursors synthesised at 1250 °C (amorphous content = 99%), a mixture of (N)-C-A-S-H and (N,C)-AS-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/ 501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/ AEI/10.13039/50110001033., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (author's final draft)