Pasar al contenido principal

DISEÑO Y SINTESIS DE ADICIONES MINERALES DE BAJO CARBONO Y DE CEMENTOS DE BAJO CARBONO

PID2022-138637OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Calcium or Sodium Carbonate Influence on Calcium Sulfoaluminate Clinker Hydration

  • Padilla Encinas, Pilar
  • Fernández-Jiménez, Ana
This work shows how the presence of calcium carbonate and sodium carbonate (5% and 20%) affects the hydration of a commercial calcium sulfoaluminate clinker (KCSA). For this study, water-hydrated pastes were prepared and the mechanical compressive strength and hydration rate were determined. The hydration products were characterised by XRD, DTA/TG, FTIR and SEM. The incorporation of CaCO3 can have a beneficial effect on the development of the mechanical strength of KCSA, especially at 90 days. It does not significantly alter the hydration kinetics and the hydration products formed are mainly ettringite and AH3. However, sodium carbonate has a detrimental effect, slowing down the hydration kinetics and reducing the development of mechanical strength, especially at early ages. The 20% Na2CO3 favours the formation of calcium aluminate, gaylusite and thenardite over ettringite. These phases are metastable in the presence of sodium and decompose to form calcite, alumina gel and a large amount of thenardite, which leaches out as efflorescence, causing microcracks and loss of strength in the material., This work has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects, PID2022-138637OBC31/AEI/10.13039/501100011033/FEDER, UE). The award of the FPI pre-doctoral grant (BES-2017-082022) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín, P.
  • García-Lodeiro, Inés
  • Fernández-Carrasco, L.
  • Blanco-Varela, María Teresa
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (∼20 % CaO and SiO2/CaO≈ 3 and SiO2/Al2O3 ≈ 3). Three temperatures of synthesis were tested: 1000 °C, 1100 °C and 1250 °C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000 °C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesized at 1000 and 1100 °C (amorphous content <70 %), a (N,C)-A-S-H type gel was formed, as the main product of hydration. However, in those cements made with precursors synthesized at 1250 °C (amorphous content ≥99 %), a mixture of (N)–C-A-S-H and (N,C)-A-S-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/AEI/10.13039/50110001033. The award of the FPI pre-doctoral grant (PRE2020-091909) is also acknowledged. This work has been carried out in the facilities of Instituto Eduardo Torroja de Ciencias de la Construcción (IETcc-CSIC) and the Universidad Carlos III de Madrid (UC3M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transforming landfilled coal ash in ultralow clinker binders

  • Xiong, Luchang
  • Maltseva, O.
  • Fernández-Jiménez, Ana
  • Wan, Zhijun
  • Palomo, Ángel
The gradual shortage of fly ash caused by the closure of coal-fired power plants in some areas has stimulated increased research into novel pozzolanic supplementary cementitious materials (SCMs), with a particular focus on landfilled coal ash (LA). A novel hybrid alkaline cement (HAC) was developed using 70% LA and 30% ordinary Portland cement (OPC), together with small amounts of sodium sulfate and sodium citrate as sustainable hydration activators. The reaction kinetics, mineralogical composition, and microstructure of HACs were thoroughly investigated using conduction calorimetry analysis, strength testing, X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy–energy-dispersive spectroscopy (SEM-EDS), and magic angle spinning–nuclear magnetic resonance (MAS–NMR). The effects of sodium citrate and sodium sulfate on the reaction process and product formation in the OPC–LA system were clearly identified. The retarding effect of citrate-Ca and accelerating effect of sulfate-Ca led to a modification of wavenumbers in the C–(A)–S–H gel IR bands, and consequently respectively played different roles on activating the LA. Results show that the strength performance of HACs (CA37SuCi group) even without ratio optimization achieve the level of P.O. 32.5. The cost and CO2 emission during laboratory level production of CA37SuCi group are 56.2% and 57.38% less than those of P.O. 42.5, respectively. An evaluation of technical, economic, and environmental aspects suggests that LA-based HACs can contribute significantly to energy conservation and emission reduction in the cement industry, while also offering potential solutions to the regional shortage of fly coal ash., This research has been conducted thanks to the sup-port of Spanish Ministry of Science and Innovation, Projects PDC2021-120771-I00/AEI/10.13039/501100011033/European Union Next Generation EU/PRTR(REVERDECE), the projects PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE (OBISUS), and the China Postdoctoral Science Foundation (Project No.:2024M763561)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Binary and ternary cements based on calcium sulphoaluminate clinker

  • Padilla Encinas, Pilar
  • Palomo, Ángel
  • Gómez de la Torre, María Ángeles
  • Fernández-Jiménez, Ana
This paper analyses the hydration and mechanical strength development of binary and ternary cements based on calcium sulphoaluminate clinker (KCSA). The binary cements were approximately 50 % KCSA /50 % fly ash (FA) and the ternary cements were around 25 % KCSA/ 50 % FA/ 25 % belite clinker (KB). These cements were hydrated in the absence (BC, “blended cement”) and in the presence of an alkaline activator (HAC, “hybrid alkaline cement”) to enhance the reaction of the SCMs. The presence of the activator (50 wt% Na2SO4 + 50 wt% CaSO4) has been a positive effect on the development of mechanical strength. The results of the research suggest that the production of hybrid cements using calcium sulphoaluminate clinker with fly ash and solid activators may be a viable alternative to conventional Portland for applications that do not require high strength development., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects, PID2022\u2013138637OB-C31/AEI/10.13039/501100011033/FEDER, UE). The award of the FPI pre-doctoral grant (BES-2017\u2013082022) is also acknowledged. This work has been carried out in the facilities of Instituto Eduardo Torroja de Ciencias de la Construcci\u00F3n (IETcc-CSIC). Also, thanks to HeidelbergCement Hispania for supplying the clinker., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Valorización de las cenizas de vertedero de central térmica en cementos y hormigones

  • Rojo Esteban, Alicia
  • Alonso López, M. del Mar
  • Gil-Maroto, A.
  • García Calvo, José Luis
  • Maltseva, O.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Trabajo presentado en las VI Jornadas de Jóvenes Científicos en Materiales de Construcción, celebradas en Madrid (España), los días 19 y 20 de mayo de 2025., El objetivo de este trabajo fue valorizar las cenizas de vertedero de central térmica en cementos y hormigones más sostenibles. Para ello se preparó una mezcla denominada FlyGlass (80% ceniza volante de vertedero + 15 % escoria de alto horno + 5 % activador alcalino) que se activó mecánicamente por molienda en un molino de bolas hasta obtener 90% de partículas inferiores a 20 micras. El conglomerante empleado fue una mezcla del 40% CEM II 42,5 + 60 % FlyGlass. Se evaluó el comportamiento mecánico a compresión en pastas, morteros y hormigones, empleando como referencia en todos los casos el cemento CEM II 42.5 (65-79% Clinker + 21-35% de Ceniza + Escoria). Los productos de hidratación se caracterizaron por DRX, FTIR, FRX y RMN. La cinética del proceso de hidratación se analizó por calorimetría de conducción isoterma y ultrasonidos. Por último, se elaboró un hormigón de 370 Kg/m3 con la mezcla cementante que se empleó para pavimentar un sector del aparcamiento del Instituto de Ciencias de la Construcción Eduardo Torroja. Los resultados obtenidos indican que las pastas realizadas con el cemento que tiene un 60% de FlyGlass alcanzan a 28 días unas resistencias a compresión de 71 MPa, mientras que los morteros alcanzan 42 MPa; Siendo ambos valores comparables al cemento de referencia. El hormigón elaborado para el pavimento presentó una resistencia a compresión a los 28 días de 35,4 MPa y a flexión de 5,4 MPa, en ambos casos comparables a las obtenidas en el hormigón de referencia (38,3 y 5,7 MPa, respectivamente)., Este trabajo ha sido financiado por la Agencia Española de Investigación (AEI), el Ministerio de Ciencia e Innovación y el FEDER (proyectos de investigación PDC2021-120771-I00/AEI/10.13039/ 501100011033 / European Union Next Generation EU/PRTR (REVERDECE) y proyecto PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE. También se agradece la concesión de la beca predoctoral FPI PRE2022-000031, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable synthetic supplementary cementitious materials to make ultra-low clinker cement

  • Martín-Rodríguez P.
  • García-Lodeiro, Inés
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
This article analyzes the feasibility of synthesizing artificial aluminosilicates for use as sustainable synthetic supplementary cementitious materials (S3CM) in the manufacture of hybrid alkali cements (HAC) that are included in the ultra-low clinker content cement (ULCC) category. In this fundamental study, synthetic aluminosilicates (S3CM) were produced by heat treatment (at three different temperatures: 1000 °C, 1100 °C, and 1250 °C) using laboratory reagents, with a CaO content of ≈20% and an SiO2/Al2O3 ratio of ≈3. Their pozzolanic activity was analyzed using the saturated lime solution test. Pastes composed of 67.4 % S3CM + 28.8 % CEM 53.5R + 3.8 % Na2SO4 were prepared and their mechanical behavior was determined. The reaction products were characterized by X-ray diffraction (XRD), thermogravimetry (TG), nuclear magnetic resonance in solids (NMR), and backscatter electron microscopy (BSEM). Regardless of the different amorphous phase content in the S3CM (depending on the synthesis temperature), the mechanical strengths obtained in the ULCCs were of the same order. In all cases, compressive strengths reached over 50 MPa after 28 days of curing. An (N)-C-A-S-H-type gel was identified as the main reaction product, responsible for the good mechanical behavior of the cements, and portlandite, calcite, and ettringite were observed as secondary hydration products. ULCC produced using the S3CM GCN-1250 (practically 100 % amorphous phase) achieves compressive strengths that are fairly comparable to those obtained with ULCC formulated with GCN-1000 and GCN-1100 (which contain ∼65-70 % amorphous phase). These similar values are attributed to the composition of the amorphous phase in GCN-1000 and GCN-1100, specifically its low CaO/SiO2 and high SiO2/Al2O3 ratios., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE). The research consolidation project (CNS2023-144148 AEI/10.13039/501100011033), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001033) and the European Union \"Next generation EU/PRTR\", are gratefully acknowledged. The award of the FPI pre-doctoral grant (PRE2020-091909) is also acknowledged. This work has been carried out in the facilities of Instituto Eduardo Torroja de Ciencias de la Construcci\u00F3n (CSIC) and the Universidad Carlos III de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of low-carbon cements (LCCM) by alkaline activation technology

  • Fernández-Jiménez, Ana
Paper presented at the II International Meeting Molecules4Life, Vila Real, Portugal, 10-19 September 2025, Portland cement (PC) manufacturing contributes significantly to energy consumption, greenhouse gas (GHG) emissions and natural resource depletion. PC production increases by 7-8 % annually and its manufacture accounts for 7-9 % of total GHG production. In order to reduce CO2 emissions, the cement industry's roadmap includes, among other options: increasing the content of supplementary cementitious materials (SCMs) to replace Portland cement clinker or making clinker-free cements. By applying alkaline activation technology [1-5], both options are possible to produce low-carbon cements -(LCCM). Alkaline cements (AC) are obtained by the physical-chemical interaction of materials (aluminosilicates) from natural origin or industrial waste (with amorphous or vitreous structures) with alkaline activators. Hybrid alkaline cements (HAC) are multi-component systems containing a high percentage of mineral additions (dehydroxylated clays, fly ash, slag, mining waste, etc.), low proportions of Portland clinker (<30 %) and a small proportion of activators (solids or liquids) of moderate alkalinity (Na2SO4, NaCO3, NaCl, ...). At this point, it is important to highlight the great versatility in terms of the materials used in these cements, which allow the recovery of waste from other industries. The use of alkaline activation technology therefore allows the development of new sustainable materials with low CO2 emissions, in addition to the recovery of by-products or industrial waste, avoiding the overexploitation of natural resources and favouring the circular economy., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research Project PID2022-138637OB-C31/AEI/10.13039/501100011033 /FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Avoiding calcination: Low-carbon alkali-activated binders from mechanochemically activated illitic, carbonate-rich clays

  • Clausi, Marina
  • Fernández-Jiménez, Ana
  • Girardi, Gianluca
  • Amicarelli, Vera
  • Pinto, Daniela
The growing demand for low-carbon construction materials has intensified interest in alkali-activated binders (AABs) based on alternative clay precursors beyond high-purity kaolinite. In this study, mechanochemical activation is investigated as a sustainable pre-treatment strategy for an illitic, carbonate-rich clay from southern Italy, aiming to avoid energy-intensive calcination and CO₂ emissions associated with carbonate decomposition. Two grinding approaches—high-energy vibro-milling and conventional ball milling—were applied and systematically compared in terms of their effects on clay structure, reactivity, and performance in alkali-activated systems. The mechanically treated clays were characterized using a multi-analytical approach including laser granulometry, XRPD, TGA/DTG, SEM-EDS, and 27Al and 29Si MAS NMR spectroscopy. High-energy milling induced extensive delamination and amorphization of clay minerals, increasing the amorphous content to 41 ± 5 wt%, while conventional ball milling produced more limited structural disorder (25 ± 3 wt%). These structural changes significantly influenced alkali reactivity and geopolymerization efficiency. Alkali-activated pastes synthesized from high-energy milled clay exhibited enhanced aluminosilicate network reorganization, greater Al incorporation into tetrahedral sites, and the formation of predominantly amorphous N–A–S–H to (N,C)–A–S–H gels, resulting in compressive strengths up to 16.5 MPa after 28 days, particularly under elevated curing temperatures. The binders show strength enough for certain construction and soil-stabilization uses. The findings confirm that mechanochemical activation is a viable, more sustainable alternative to thermal treatment for carbonate-rich clays, allowing them to be used as low-carbon precursors in alkali-activated binders and broadening the range of local clays suitable for sustainable construction., The research was financially supported by University of Bari Aldo Moro through the fund Next Generation EU-MUR D.M. 737/2021 (grant S64-H91I21001710006-Horizon Europe Seeds). Also by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2022-138637OB-C31/AEI/10.13039/501100011033 / FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms of early hydration of calcium sulfoaluminate cement in aqueous and alkaline media

  • Tambara Jr, L.U.D.
  • Rocha, Janaíde C.
  • Fernández-Jiménez, Ana
The early hydration of calcium sulfoaluminate (CSA) cement in water (CSAH) and in 2 M sodium hydroxide (CSA2M), both with a liquid/solids ratio of 0.5, was investigated. Hydration kinetics were assessed using in situ X-ray diffraction, isothermal conduction calorimetry, ultrasonic pulse velocity (UPV) and mechanical strength measurements. The maximum heat release occurred earlier in the CSA2M system and UPV measurements revealed a more rapid increase in mechanical stiffness. The presence of alkalis accelerated the dissolution of ye’elimite and anhydrite, leading to a shorter induction period and faster precipitation of ettringite. The phase refinement confirmed a higher dissolution rate of anhydrite in the alkaline environment, while the formation of ettringite stabilised within 10 h. At age 25 h, the ettringite content was 58.3% in CSAH and 48.2% in CSA2M. This finding confirms that the UPV measurements provided a reliable indication of the onset of setting and early structural development in CSA cements and contribute to a deeper understanding of the early hydration mechanisms of CSA cements and the impact of alkalis on phase evolution., This work was funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research project PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE) and the Brazilian National Council for Scientific and Technological Development (CNPq) under project 151890/2020-0., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CaCl2-driven phase instability in low-carbon calcium sulfoaluminate binders

  • Padilla Encinas, Pilar
  • Tambara Jr, L.U.D.
  • Fernández-Jiménez, Ana
This work studies the effect of CaCl2, at 5 wt.% and 20 wt.%, on the hydration of a commercial calcium sulfoaluminate clinker (KCSA) and cement (CSA). For this purpose, CSA and KCSA pastes were prepared with CaCl2 substitution and hydrated for 1, 3, 28 and 90 days. The mechanical strength of the pastes and the hydration kinetics were assessed by compressive strength testing and isothermal conduction calorimetry, respectively. The results show that CaCl2 content modifies hydration and strength development in different ways depending on the binder composition. With 5 wt.% CaCl2, hydration was delayed, early mechanical strength decreased, and the main phases formed were ettringite, Friedel’s salt, monosulfoaluminate and AH3. In contrast, 20 wt.% CaCl2 accelerated hydration, but its effect strongly depended on the system. In KCSA, mechanical strength was maintained up to 90 days, whereas in CSA, severe degradation occurred from 28 days onwards and was associated with thaumasite formation., This work has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of calcium sulfoaluminate cement on the reactivity of alkali-activated fly ash and slag hybrid binders

  • Rodríguez-Barboza, L.I.
  • Fernández-Jiménez, Ana
  • Guerra-Cossío, M.A.
  • Gómez-Zamorano, L.Y.
This study evaluates the influence of alkaline activation systems on the reactivity, hydration kinetics, phase development, microstructure, and compressive strength of hybrid alkaline binders based on fly ash or ground granulated blast furnace slag with low calcium sulfoaluminate cement content. The binders contained 30 wt% calcium sulfoaluminate cement and 70 wt% fly ash or ground granulated blast furnace slag. Three activation systems were analyzed: (a) Na₂SiO₃ + NaOH at 7 wt% Na₂O equivalent, (b) Na₂SO₄ + Ca(OH)₂ at 2 wt% Na₂O and 2 wt% CaO equivalents, and (c) K₂SO₄ + Ca(OH)₂ at 2 wt% K₂O and 2 wt% CaO equivalents. Sulfate–calcium activation systems accelerated early hydration and promoted rapid ettringite precipitation, resulting in a reaction sequence similar to that of neat calcium sulfoaluminate cement despite the high supplementary cementitious material content. In contrast, silicate–hydroxide activation delayed early reactions and suppressed early ettringite formation, leading to the formation of sodium-containing AFm phases, particularly the U phase, after 28 days. Although silicate–hydroxide activation produced higher 7-day compressive strength, sulfate–calcium activation systems showed greater strength gain between 7 and 28 days, associated with persistent AFt formation and the development of a more continuous reaction matrix. The sulfate–calcium-activated systems exceeded 20 MPa in compressive strength at 28 days, indicating that hybrid alkaline binders with low calcium sulfoaluminate cement content can achieve technically relevant mechanical performance., The authors gratefully acknowledge the financial support from the Mexican Secretariat of Science, Humanities, Technology, and Innovation (Secretar\u00EDa de Ciencia, Humanidades, Tecnolog\u00EDa e Innovaci\u00F3n, SECIHTI ) through research grant PEE-2025-C-15, as well as a SECIHTI scholarship. PROACTI provided additional support at the Universidad Aut\u00F3noma de Nuevo Le\u00F3n (Grant No. 2-IDT-2024 ). Funding from the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation, and the European Regional Development Fund (ERDF) through project PID2022\u2013138637OB-C31/AEI/10.13039/501100011033/FEDER, EU is also acknowledged. The authors also gratefully acknowledge Grupo Cementos Chihuahua ( GCC ) for their support., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín Rodríguez, Pablo
  • Garcia Lodeiro, María Inés
  • Fernández Carrasco, Lucía|||0000-0002-2379-3782
  • Blanco Varela, M.Teresa
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana María
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (~20 % CaO and SiO2/CaO˜ 3 and SiO2/Al2O3˜ 3). Three temperatures of synthesis were tested: 1000°C, 1100°C and 1250°C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000°C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesised at 1000 and 1100°C (amorphous content < 70%), a (N,C)-A-S-H type gel was formed, as the main product of Hydration. However, in those cements made with precursors synthesised at 1250 °C (amorphous content = 99%), a mixture of (N)-C-A-S-H and (N,C)-AS-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/ 501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/ AEI/10.13039/50110001033., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín Rodríguez, Pablo
  • Garcia Lodeiro, María Inés
  • Fernández Carrasco, Lucía
  • Blanco Varela, M.Teresa
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana María
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (~20 % CaO and SiO2/CaO˜ 3 and SiO2/Al2O3˜ 3). Three temperatures of synthesis were tested: 1000°C, 1100°C and 1250°C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000°C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesised at 1000 and 1100°C (amorphous content < 70%), a (N,C)-A-S-H type gel was formed, as the main product of Hydration. However, in those cements made with precursors synthesised at 1250 °C (amorphous content = 99%), a mixture of (N)-C-A-S-H and (N,C)-AS-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/ 501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/ AEI/10.13039/50110001033., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (author's final draft)