Pasar al contenido principal

ENCAPSULACION DE RESIDUOS RADIOACTIVOS EN CEMENTOS DE FOSFATO DE MAGNESIO

PID2020-116738RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Corrosion behavior and immobilization of pure aluminum and Al-Mg alloy LLRW in magnesium potassium phosphate cements

  • Perona, R.
  • Fernández-García, Carla
  • García-Lodeiro, Inés
  • Criado Sanz, María
  • Bastidas Rull, José María
  • Alonso, M. Cruz
Magnesium potassium phosphate cement (MKPC) is a candidate material to replace ordinary Portland cement (OPC) for the encapsulation of metallic low-level radioactive waste (LLRW) and improve the corrosion behavior of encapsulated reactive metals such as aluminum. The objectives of this research were to study the corrosion behavior of pure Al (A1050) and Al¿Mg alloy (AA5754) embedded in MKPC and OPC mortars, to assess the effect of curing conditions on hardening properties and on the reactivity of Al and Al¿Mg alloy. Results were obtained with measurements of compressive strength, X-ray diffraction and polarization resistance and the proposed interpretation was based on Faraday¿s law. In the first 15 days of interaction in water immersion the corrosion rate and the volume of hydrogen evolved were seen to be at least one order of magnitude lower for AA5754 in MKPC than in OPC mortar, yielding average corrosion current density values of 1.85 and 109.0 × 10¿6 A/cm2, and hydrogen volumes of 0.33 L/m2 and 17.8 L/m2 for AA5754/MKPC and AA5754/OPC, respectively. The pore pH was close to neutral and the hardening properties were highly dependent on the curing conditions., This Project has received funding from the European Union's Horizon 2020 Research and Innovation Program for Nuclear Fission and Radiation Protection Research (call NFRP−2019−2020) under grant agreement No. 945098 (PREDIS). Also acknowledgements of C.F.G. for the project funded by the CSIC, PIE (202260E009), I.G.L. for the JIN project (PID2020−116738RJ−100) funded by the Ministry of Science and Innovation of Spain, and M.C. for the project funded by the Community of Madrid (2019−T1/AMB−13672)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorisation of “La Palma” Volcanic Ash for Making Portland-Blended, Alkaline and Hybrid Portland–Alkaline Cements

  • Martín-Rodríguez, Pablo
  • Fernández-Jiménez, Ana
  • Alonso López, M. del Mar
  • Palomo, Ángel
  • García-Lodeiro, Inés
The present work evaluates the feasibility of using volcanic fly ash (VFA) generated by the eruption of the Tajogaite volcano on the island of La Palma (Spain) in 2021, as a precursor in the preparation of cementitious materials with different Portland cement (PC) replacement levels (0%, 30%, 70% and 100%), in the absence (Blended Cement, BC) and presence of an alkaline activator (Hybrid Alkaline Cement, HAC, and Alkaline Cements, AC). Hydration kinetics (isothermal conduction calorimetry), paste mechanical strengths and reaction products were characterised by XRD, FTIR, TG/DTG and BSEM/EDX. The results obtained indicate that the strengths developed by the hybrid alkaline cements (HAC) are higher than those of the blended cements (BC), especially at the age of 2 days, where 25 MPa were obtained with the replacement of 70% PC by VFA. Alkaline cements (AC, 100% VFA) that were prepared with 8 M NaOH solution as the activator reached 40 MPa after 2 days. It was observed that in all the binders, depending on the initial composition of the binder mixture and the percentage of replacement and/or activator, VFA reacts to form cementitious gels, C-A-S-H and N-A-S-H type, which supports its use as a mineral addition to blended cement or as a precursor in the preparation of alkaline and hybrid alkaline cements., The authors would like to thank the Spanish Ministry of Science and Innovation, the Spanish National Research Agency (AEI) and the FEDER funds that supported the research projects: PID 2019-111464RB-I00/AEI/10.13039/501100011033 (GlassyMat) JIN Projects 2021 PID2020-116738RJ-I00/AEI/10.13039/501100011033 (ENCAPCEM); and PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2020-091909/AEI/10.13039/501100011033) of Pablo Martin Rodriguez., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Durability of Magnesium Potassium Phosphate Cements (MKPCs) under Chemical Attack

  • Chhaiba, Salma
  • Martínez-Sánchez, Sergio
  • Husillos Rodríguez, N.
  • Palomo, Ángel
  • Kinoshita, Hajime
  • García-Lodeiro, Inés
Magnesium phosphate cements (MPCs), also known as chemically bonded ceramics, represent a class of inorganic cements that have garnered considerable interest in recent years for their exceptional properties and diverse applications in the construction and engineering sectors. However, the development of these cements is relatively recent (they emerged at the beginning of the 20th century), so there are still certain aspects relating to their durability that need to be evaluated. The present work analyses the chemical durability of magnesium potassium phosphate cements (MKPCs) during 1 year of immersion in three leaching media: seawater, a Na2SO4 solution (4% by mass) and deionized water. For this, pastes of prismatic specimens of MKPC, prepared with different M/P ratio (2 and 3), were submitted to the different chemical attacks. At different ages, the changes on the mechanical strengths, microstructure (BSEM, MIP) and mineralogy (XRD, FTIR, TG/DTG) were evaluated. The results obtained indicate that, in general terms, MKPC systems show good behavior in the three media, with the more resistant system being the one prepared with a M/P molar ratio of 3., The JIN project (PID2020-116738RJ-I0 AEI/10.13039/501100011033) and the RYC excellence contract (RYC2021-032620-I), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001033) and the European Union “Next generation EU/PRTR”. Institutional Review Board Statement, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acid resistance of alkali-activated binders based on clays from phosphate mining by-products

  • Mabroum, Safaa
  • García-Lodeiro, Inés
  • El Machi, Aiman
  • Chhaiba, Salma
  • Taha, Yassine
  • Benzaazoua, Mostafa
  • Blanco-Varela, María Teresa
  • Hakkou, Rachid
This paper outlines the results of studying the resistance of alkali-activated materials (AAM), based on calcined yellow clay from phosphate mine by-products as a precursor, to an acid attack (with sulfuric and phosphoric acids, 5 %, pH ≈ 0,8–2). Calcined yellow clay (YC850) is used as the source of aluminosilicates, containing montmorillonite, dolomite, and quartz. The alkali-activation of such materials allows the determination of an adequate valorization way and evaluating their durability leads to defining the range of application. The residual compressive strengths were measured after 1, 2, and 4 weeks of immersion in those acids. The deterioration suffered by the paste specimens was examined using different techniques., The degree of deterioration differs from one acid to another; in sulfuric acid, the strengths decrease from 47 MPa to 10.6 MPa presenting 77.4 %. While in phosphoric acid, the decrease was about 36.2 % (30 MPa) after 28 days of attack. This detriment in the strengths is associated with changes not only in the microstructure but also with the alteration of the reaction products, mainly the binding gels C-A-S-H and (C,N)-A-S-H, which undergoes dealumination and decalcification. What is more, the chemical attack involves several reactions; calcium coming from the precursor reacts with the sulfates (in the H2SO4 attack) inducing the precipitation of gypsum, which is responsible for the significant strength loss. In addition, the dissolution of crystalline minerals, such as periclase and gehlenite (present in the precursor) generates higher porosity explaining the obtained results., The authors are acknowledged the concession of the project ICOOP +2020 (ref COOPA20454 funded by the CSIC) and to the Spanish Agency: AGENCIA ESTATAL DE INVESTIGACIÓN (JIN Projects 2021 PID2020-116738RJ-I00/AEI/10.13039/501100011033) and the RYC Excellence Contract (RYC2021-032620-I, MCIN/AEI/10.13039/50110001033). This work was supported by OCP-SA, Morocco, under the specific agreement OCP/UM6P #AS03., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Durability of Magnesium Potassium Phosphate Cements (MKPCs) under Chemical Attack

  • Chhaiba, Salma
  • Martínez-Sánchez, Sergio
  • Husillos Rodríguez, N.
  • Palomo, Ángel
  • Kinoshita, Hajime
  • García-Lodeiro, Inés
Six replicates per series were used to determine the compressive strengths. Testing was conducted using an Ibertest Autest 200/10-SW (Madrid, Spain) test frame, the average and standard deviation of the results were then calculated and reported. Prior to microstructural characterization (Mercury Intrusion Porosimetry (MIP) and Scanning Electron Microscopy with Energy Dispersive X-ray Analysis (BSEM/EDX), one of the specimens, left unbroken, is submitted to immersion in isopropanol for 2 days to stop further hydration reactions. Subsequently, they were dried in a desiccator for a minimum of 48 h to eliminate any residual isopropanol. To prepare the powder samples (for the mineralogical analysis), specimen fragments were ground to pass through a 63 μm sieve as per previous recommendations to stop the reaction processes. Subsequently, they were mixed with isopropanol for 3 min, filtered and placed in a vacuum desiccator until a constant weight was attained. Changes in the pore structure were evaluated by mercury intrusion porosimetry (MIP) on a Micromeritics Poresize 9320 IV.09 mercury intrusion porosimeter (Micromeritics Instrument Corporation, Norcross, GA, USA), assuming a sample–mercury contact angle of 140◦. The microstructure of the samples was studied by Backscattering Electron Microscopy (BSEM) on a JEOL JSM6400 scanning electron microscope (Tokyo, Japan). Additionally, a semi-quantitative analysis of the chemical composition of the reaction products was conducted via Energy Dispersive X-ray spectroscopy (EDX) on a Links ISIS EDX analyzer, collecting at least 40 points from the cementitious matrix per sample; the data were processed using the Bruker ESPRIT 1.9 software, whereas the mineralogical and chemical composition of samples were studied via X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Thermogravimetric analysis (TG/DTG). XRD measurements were carried out on a Bruker D8 Advance diffractometer (Karlsruhe, Germany) in a 2θ range of 5–60◦ with a step size of 0.02◦ every 0.5 s using CuKα radiation at 40 kV and 30 mA. The existing phases were identified and quantified using the DiffracPlus EVA 4 2.1 and TOPAS 5.0 software, in conjunction with a chemical reconciliation. A Nicolet 6700 spectrometer (Thermo Fisher Scientific, Waltham, MA, USA, 02451) was employed for FTIR analysis, covering a range of 400 cm−1 to 4000 cm−1 with a resolution of 4 cm−1, using powdered samples embedded in KBr pellets (0.001 g sample/ 0.099 g KBr). Thermogravimetric analysis (TGA) was conducted using a Perkin-Elmer TG analyzer (PerkinElmer, Shelton, USA). Powdered samples underwent heating from room temperature to 800 ◦C at a rate of 10 ◦C min−1 under a N2 flow of 200 cm3/min., [EN] This is the experimental dataset used in the paper Materials 17, 4252 (2024) (https://doi.org/10.3390/ma17174252) Durability of magnesium potassium phosphate cements (MKPCs) pastes during 1 year of inmersión under chemical attack, focusing on the effects of deionized water, sodium sulfate and seawater, have been determined with different analytical tecnhiques. Prismatic specimens (1 × 1 × 6 cm3) of MKPC were prepared with different MgO/H2PO4 ratio (2 and 3), at different ages, cured under two curing conditions (CC and LAB), where were maintained up to 28 days: - CC: In a climatic chamber at 21 ± 3 ◦C and 99 ± 5% relative humidity (RH). - LAB: In the laboratory at 21 ± 3 ◦C and 52 ± 5% of relative humidity (RH). After these 28 days, three set of samples, for each curing regime, were prepared. One additional set was used as a reference (only cured for 28 days). Changes in the mechanical strengths, mineralogy (XRD, FTIR, TG/DTG), and microstructure (BSEM, MIP) of all 4 sets were determined., We acknowledge financial support from the JIN project (PID2020-116738RJ-I0 AEI/10.13039/501100011033) and the RYC excellence contract (RYC2021-032620-I), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001033) and the European Union “Next generation EU/PRTR”., COMPRESSIVE STRENGHTS folder: C S M-P-(2-3) H2O; C S M-P-(2-3) SO4 ; C S M-P-(2-3) SW. MIP folder: porosimetry_readme; M-P 3 CC 28d (Ref 0); M-P 3 LAB 28d (Ref 0); M-P 3 CC 28d H2O; M-P 3 CC 28d SO4; M-P 3 CC 28d SW; M-P 3 CC 90d H2O; M-P 3 CC 90d SO4; M-P 3 CC 90d SW; M-P 3 CC 180d H2O; M-P 3 CC 180d SO4; M-P 3 CC 180d SW; M-P 3 CC 1y H2O; M-P 3 CC 1y SO4; M-P 3 CC 1y SW; ); M-P 3 LAB 28d H2O; M-P 3 LAB 28d SO4; M-P 3 LAB 28d SW; M-P 3 LAB 90d H2O; M-P 3 LAB 90d SO4; M-P 3 LAB 90d SW; M-P 3 LAB 180d H2O; M-P 3 LAB 180d SO4; M-P 3 LAB 180d SW; M-P 3 LAB 1y H2O; M-P 3 LAB 1y SO4; M-P 3 LAB 1y SW. TG-DTG folder: TG-DTG_readme; loss of water; TG-DTG M-P 3 CC 28d, 1 year. XRD folder: XRD_readme; M-P 3 CC 28d H2O; M-P 3 CC 28d SO4; M-P 3 CC 28d SW; M-P 3 CC 90d H2O; M-P 3 CC 90d SO4; M-P 3 CC 90d SW; M-P 3 CC 180d H2O; M-P 3 CC 180d SO4; M-P 3 CC 180d SW; M-P 3 CC 1year H2O; M-P 3 CC 1year SO4; M-P 3 CC 1year SW. FTIR folder: FTIR_readme; FTIR M-P 3 CC Ref, 28d, 1y. SEM-EDX folder: BSEM-EDX_readme; mapping M-P 3 CC-REF; mapping M-P 3 CC-H2O; mapping M-P 3 CC-SO4; mapping M-P 3 CC-SW; SEM M-P 3 CC H2O a; SEM M-P 3 CC H2O b; SEM M-P 3 CC SO4 a; SEM M-P 3 CC SO4 b; SEM M-P 3 CC SW a; SEM M-P 3 CC SW b; EDX M-P-3 28d; EDX M-P-3 1y. WATER COMPOSITION folder, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Encapsulation of polucite in magnesium phosphate cement (MKPC)

  • Husillos Rodríguez, N.
  • Chhaiba, Salma
  • Kinoshita, Hajime
  • Palomo, Ángel
  • García-Lodeiro, Inés
Pollucite, (Cs(Si2Al)O6·nH2O), has long been considered one of the most stable and suitable mineral forms for the immobilization of radioactive cesium over time, due to its good thermal stability, its low leaching rate (high resistance to leaching) and the fact that it has a dense and stable structure through its strong covalent bonds. But even if Cs is fixed in a chemically stable form (pollucite), this form is still classified as intermediate level waste (ILW) and must therefore be safely encapsulated in a cementitious matrix. For this purpose, magnesium phosphate cement pastes (MKPC) have been designed with the incorporation of pollucite, in a proportion of 0 and 10 %. The effect of the incorporation of the pollucite on the mineralogy and microstructure of the MKPC systems was analysed from the mechanical and mineralogical point of view. Mechanical compressive strengths (1, 7, 28 and 90 days), as well as mineralogical and microstructural changes in presence of pollucite (XRD, ATD/TG, Hg porosimetry and BSEM) were analysed. Finally, the confining capacity of this matrix has been determined after 90d of leaching (ANSI/ANS-16.1-2003)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Magnesium Phosphate Cement Based on Low-Grade MgO

  • García-Lodeiro, Inés
  • Chhaiba, Salma
  • Husillos Rodríguez, N.
  • Palomo, Ángel
  • Kinoshita, Hajime
(This article belongs to the Special Issue Cement-Based Materials and Construction Materials: Modeling, Characterization and Mechanical Behavior)., Magnesium Phosphate Cements (MPCs) are a class of inorganic cements that have gained significant attention in recent years due to their exceptional properties and diverse appli-cations in the construction and engineering sectors, particularly in the confinement of ra-dioactive waste. These cements set and harden through an acid-base reaction between a magnesium source (usually dead-burnt magnesia) and a phosphate source (e.g., KH2PO4). The dead-burnt MgO (DBM) used is typically obtained through the calcination of pure MgCO3 at temperatures between 1600-2000°C, a process that involves very high-energy costs. Therefore, it is essential to explore cheaper and more sustainable sources of MgO. The present work explores the possibility of using low-grade magnesia (≈58% MgO), a secondary waste product generated during the calcination of magnesite for sintered MgO production. It also evaluates the effect of the M/P ratio and curing conditions (especially relative humidity) on the mechanical, microstructural, and mineralogical de-velopment of these cements over a period of up to one year. It is revealed that low MgO is perfectly apt for the fabrication of MKPC cements. The development of these cements is highly dependent on both M/P molar ratio and the RH, and the M/P molar ratio of 3 pro-vided the most stable system from the mechanical, mineralogical and microstructural point of view, which are essential parameters for any cementitious matrix that wants to be considered as a potential confiner of radioactive waste., This research (RYC2021-032320-I) was funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) and the European Union “Nex generationEU/PRTR”. This work is part of a JIN project of the National Plan (PID2020-116738RJ-I0 AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbonation and Phase Evolution in MgO-SiO2 Cements: Impact on Strength

  • Mármol, Gonzalo
  • Fernández-Jiménez, Ana
  • Blanco-Varela, María Teresa
  • García-Lodeiro, Inés
Magnesium silicate hydrate (M-S-H) binders, synthesized from magnesia and silica, exhibit promising mechanical and thermal properties but face challenges in early strength development due to delayed kinetics and limited MgO solubility. This study investigates the impact of early exposure to CO<sub>2</sub>-saturated atmospheres on MgO-SiO<sub>2</sub> cementitious systems, emphasizing the role of carbonation in phase evolution and mechanical performance. Early carbonation promotes the formation of hydrated magnesium hydroxycarbonates (HMHC), altering hydration pathways and reducing M-S-H gel content. Key analyses, including XRD, TGA, SEM-EDS, and FTIR, reveal that higher carbonation levels correlate with reduced Mg(OH)<sub>2</sub> stability at early ages, an enhanced precipitation of HMHC phases, and significant effects on mineralogy and strength. Results underscore the influence of formulation, water-to-cement ratio, and early carbonation in optimizing strength and phase development, providing a pathway to more efficient MgO-SiO<sub>2</sub> cement systems with reduced reliance on reactive SiO<sub>2</sub>., We gratefully acknowledge the Juan de la Cierva Contract (IJC2020-043925-I, MCIN/AEI/10.13039/501100011033), belonging to the Spanish State Plan for Scientific and Technical Research and Innovation 2021-2023, and the award of the RYC Excellence Contract (MCIN/AEI/10.13039/501100011033/RYC2021-032320-I) and the JIN project (PID2020-116738RJ-I0 AEI/10.13039/501100011033) funded by the Spanish Ministry of Science and Innovation and the European Union “Next generation EU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín, P.
  • García-Lodeiro, Inés
  • Fernández-Carrasco, L.
  • Blanco-Varela, María Teresa
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (∼20 % CaO and SiO2/CaO≈ 3 and SiO2/Al2O3 ≈ 3). Three temperatures of synthesis were tested: 1000 °C, 1100 °C and 1250 °C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000 °C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesized at 1000 and 1100 °C (amorphous content <70 %), a (N,C)-A-S-H type gel was formed, as the main product of hydration. However, in those cements made with precursors synthesized at 1250 °C (amorphous content ≥99 %), a mixture of (N)–C-A-S-H and (N,C)-A-S-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/AEI/10.13039/50110001033. The award of the FPI pre-doctoral grant (PRE2020-091909) is also acknowledged. This work has been carried out in the facilities of Instituto Eduardo Torroja de Ciencias de la Construcción (IETcc-CSIC) and the Universidad Carlos III de Madrid (UC3M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO₂ reactor-curing for early-strength MgO-based cementitious systems

  • Mármol, Gonzalo
  • García-Lodeiro, Inés
This study investigates the development of Mg-based cementitious systems through CO₂-reactor curing, optimizing their application in prefabricated construction materials with enhanced early-age strength. It examines the role of SiO₂ in promoting magnesium silicate hydrate (M-S-H) gel formation and its interaction with carbonation curing. MgO and M-S-H cement pastes were exposed to pressurized CO₂ curing (8.5 bar, 55 °C) with varying water-to-cement ratios to control porosity and carbonation kinetics. FTIR and XRD analyses confirmed that carbonation alters the hydration pathway, promoting brucite transformation into amorphous and crystalline magnesium carbonates. TGA and NMR results revealed that carbonation disrupts the silicate network, limiting M-S-H formation and leaving unreacted SiO₂. Microscopic characterization (SEM/TEM) showed brucite dissolution followed by nucleation of poorly crystalline carbonates, exhibiting hybrid features of nesquehonite and hydromagnesite. Mechanical testing demonstrated that CO₂ curing significantly improves compressive strength, particularly in 100 % MgO systems with higher water-to-cement ratios and in M-S-H systems within the first 24 h. These findings highlight carbonation curing as an effective method to accelerate strength development in Mg-based cements, enhancing their suitability for prefabricated applications. Additionally, the study provides new insights into the limited reactivity of SiO₂ under carbonation, suggesting alternative strategies for optimizing M-S-H formation. This work advances the understanding of Mg-based cement chemistry under CO₂ curing, paving the way for sustainable, high-performance construction materials., We gratefully acknowledge the Juan de la Cierva Contract (IJC2020-043925-I), belonging to the Spanish State Plan for Scientific and Technical Research and Innovation 2021–2023, and the JIN project (PID2020-116738RJ-I0 AEI/10.13039/501100011033) and the RYC excellence contract (RYC2021-032620-I), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001033) and the European Union “Next generation EU/PRTR. The authors also extend their gratitude to Isabel, a researcher affiliated with the Materials Science Institute of Madrid, within the Energy Conversion, Harvesting, and Storage Group, and a specialist in Nuclear Magnetic Resonance. Her collaboration has been instrumental in the proper execution and interpretation of the tests., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of activated phosphate by-products for removing methylene blue and cadmium

  • En-Naji, Salma
  • Mabroum, Hanaa
  • Khatib, Khalid
  • Taha, Yassine
  • Hakkou, Rachid
  • García-Lodeiro, Inés
The use of phosphate salts as a source of phosphate ions instead of phosphoric acid for activating phosphate by-products (especially those activated with sodium dihydrogen phosphate (NaH2PO4)) remains largely unexplored in adsorption applications. In this study, three different materials were formulated following the geopolymerization processes using phosphate waste as a precursor with varying NaH2PO4 contents. X-ray diffraction (XRD) analysis identified hydroxyapatite as the dominant crystalline phase formed after activation, with the content increasing with higher phosphate salt concentrations. Meanwhile, transmission electron microscope (TEM) analysis revealed that the amorphous gel type changed with increasing NaH2PO4 content. Initial methylene blue (MB) adsorption tests showed high efficiencies, with the 30 % NaH2PO4 activated clay by-product achieving 98 % adsorption within 15 min and reaching equilibrium within 1 h. Adsorption followed the Temkin isotherm, with a complementary contribution from the Freundlich model. It also followed pseudo-second-order kinetics, with 20 mg of adsorbent achieving a maximum removal efficiency of 99 %. Neither temperature nor pH had a significant effect on MB adsorption. Cadmium (Cd) adsorption was also evaluated in an acidic medium (5 % P2O5), showing a lower efficiency of 29.9 % due to the high acidity. However, when the pH of the solution was increased to 6, the adsorption efficiency improved to 77.3 %. These findings imply that activated clay by-products are highly effective for dye removal, such as MB, and can achieve considerable heavy metal removal under optimized conditions., The JIN project (PID2020-116738RJ-I0 AEI/10.13039/501100011033) and the RYC excellence contract (RYC2021-032620-I), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) and the European Union "Next generation EU/PRTR", are gratefully acknowledged. The authors wish to express their appreciation to the Eduardo Torroja Institute collaborators in light of the ICOOP project 2022 (ref COOPA22026) as well as to Cadi Ayyad University's Center of Analysis and Characterization (CAC) for their valuable contribution to sample characterization tests, and Prof. Jaafar Ghanbaja from the Jean Lamour Institute - University of Lorraine for his collaboration in performing the transmission electron microscopy analysis., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín Rodríguez, Pablo
  • Garcia Lodeiro, María Inés
  • Fernández Carrasco, Lucía|||0000-0002-2379-3782
  • Blanco Varela, M.Teresa
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana María
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (~20 % CaO and SiO2/CaO˜ 3 and SiO2/Al2O3˜ 3). Three temperatures of synthesis were tested: 1000°C, 1100°C and 1250°C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000°C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesised at 1000 and 1100°C (amorphous content < 70%), a (N,C)-A-S-H type gel was formed, as the main product of Hydration. However, in those cements made with precursors synthesised at 1250 °C (amorphous content = 99%), a mixture of (N)-C-A-S-H and (N,C)-AS-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/ 501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/ AEI/10.13039/50110001033., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial precursor for alkaline cements

  • Martín Rodríguez, Pablo
  • Garcia Lodeiro, María Inés
  • Fernández Carrasco, Lucía
  • Blanco Varela, M.Teresa
  • Palomo Sanchez, Ángel
  • Fernández Jiménez, Ana María
One of the main challenges for the future development of alkaline cements is the availability of precursors. Traditional precursors (such as coal FA and the BFS) have some limitations concerning quality and quantity (the long term supply is not guaranteed). The progressive closure of coal-fired power plants and changes in steel production in many countries exacerbate the problem. The present work addresses the challenge of fabricating an artificial precursor (via thermal treatment) with a chemical composition similar to a type- C fly ash (~20 % CaO and SiO2/CaO˜ 3 and SiO2/Al2O3˜ 3). Three temperatures of synthesis were tested: 1000°C, 1100°C and 1250°C. The precursors obtained after thermal treatment of a mixture of chemicals were activated with a 8 M NaOH solution. The temperature of synthesis obviously affected the degree of vitrification. Nevertheless, it can be said that partially amorphous/vitreous precursors, were produced at 1000°C, developing good mechanical performance. In all cases, compressive strengths above 20 MPa were obtained, after 1 day curing. In cements made with precursors synthesised at 1000 and 1100°C (amorphous content < 70%), a (N,C)-A-S-H type gel was formed, as the main product of Hydration. However, in those cements made with precursors synthesised at 1250 °C (amorphous content = 99%), a mixture of (N)-C-A-S-H and (N,C)-AS-H gels were observed after the hydration process., This works has been funded by the Spanish Research Agency (AEI), the Spanish Ministry of Science and Innovation and the ERDF (research projects (PID2019-11464RB-100//AEI/10.13039/501100011033, PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE)), "JIN Projects 2021 PID2020-116738RJ-I00//AEI/10.13039/ 501100011033. RYC Excellence Contract (RYC2021-032620-I, MCIN/ AEI/10.13039/50110001033., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (author's final draft)