Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of electric arc furnace slag as an alternative precursor to blast furnace slag in alkaline cements

  • Cristelo, Nuno
  • Coelho, João
  • Rivera, Jhonathan
  • García-Lodeiro, Inés
  • Miranda, Tiago
  • Fernández-Jiménez, Ana
In steel manufacturing, electric arc furnaces are increasingly common, as they use mostly scrap metal as ore source. Thus, blast furnace slag (BFS) is decreasing, while electric arc slag (EAFS) is proportionally increasing. This study focuses on the potential of EAFS in alkaline cements, as precursor or aggregate. Different EAFS/BFS mixtures, some including fly ash (FA), were activated with a NaOH solution, and characterized from a mechanical and microstructural perspective. Selected pastes were used to prepare mortars, using EAFS as aggregate. Results showed that EAFS alone doesn’t deliver an adequate strength. However, when combined with BFS and FA, it formed compact matrices with significant mechanical strength and lower hydration heat. The use of EAFS as aggregate produced higher strength than obtained with silica sand. EAFS showed the potential to be applied as a precursor in alkaline cements, and the combination of BFS/EAFS yielded higher compressive strengths than obtained with BFS alone., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Approach to Determine the Activity Concentration Index in Cements, Fly Ashes, and Slags on the Basis of Their Chemical Composition

  • Caño, Andrés
  • Suárez-Navarro, José Antonio
  • Puertas, Francisca
  • Fernández-Jiménez, Ana
  • Alonso López, M. del Mar
The manufacture of Portland cement entails high energy and environmental costs, and various solutions have been implemented in recent years to mitigate this negative impact. These solutions include improvements in the manufacture of cement clinker or the use of supplementary cementitious materials (SCMs), such as fly ash (FA) or slag as a replacement for a portion of the clinker in cement. The incorporation of these SCMs in cement may increase its radiological content as they are naturally occurring radioactive materials (NORMs). The Activity Concentration Index (ACI) is a screening tool established in the European EURATOM Directive 2013/59 to determine the radiation protection suitability of a final construction material. The ACI is determined by the activity concentrations of 226Ra, 232Th and 40K, usually determined by gamma spectrometry. The methodology of gamma spectrometry is accurate and appropriate, but this technique is not available in all laboratories. For this reason, and taking into account that there is a relationship between the chemical and radiological composition of these building materials, a new approach is proposed to determine the radiological content of these materials from a chemical analysis such as X-ray fluorescence (XRF). In this paper, principal component analysis (PCA) is used to establish the relationships between the chemical composition and radiological content of cements, FAs, and slags of different natures. Through PCA it was possible to group the cements based on two variables: CaO content and Fe2O3–Al2O3–TiO2 content. A lower correlation was observed for the FAs and slags, as the sample scores were centered around the origin of the coordinates and showed greater dispersion than the cements. The clusters obtained in the HJ–Biplots allowed the determination, using multiple regression, of models relating the activity concentration of 226Ra, 232Th (212Pb), and 40K to the oxide percentages obtained for the three matrices studied. The models were validated using five cements, one FA and one slag with relative percentage deviations (RSD(%)) equal to or less than 30% for 89% of the activity concentrations and 100% of the ACI determined., This research has been conducted thanks to the support of Projects PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX) and PDC2021-120771-I00/AEI/10.13039/501100011033/European Union Next Generation EU/PRTR (REVERDECE). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes and the government of the Autonomous Community of Madrid for the Contrato de Garantía Juvenil (PEJ-2020-TL/AMB-19344) of Queralt Belen Marzal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Greener Concrete Paving Blocks with Hybrid Alkaline Cements and Recycled Aggregates

  • Almeida, Filipe
  • Fernández-Jiménez, Ana
  • Vieira, Castorina Silva
  • Cristelo, Nuno
  • Moreira, Alberto Tavares
  • De Lurdes Lopes, Maria
The construction sector must deliver methods of construction targeting the valorization of waste that shows potential to play value-added roles. This is a key step to reduce the heavy environmental impacts caused by a sector whose outcomes are decisive to the well-being of society. The present study is intended to address the production of concrete paving blocks using a cement with a reduced clinker content and recycled aggregates. For achieving such purpose, hybrid alkaline cements with fly ash and portland cement were studied. The research involved the development of pastes and mortars prior to concrete production. The study of mortars included compositions with two different types of recycled aggregates. After evaluating the behavior of those mortars, a recycled aggregate was selected to be used in concrete. Once the most proper composition was determined, concrete and, finally, paving blocks were developed. Besides monitoring the heat flow and total heat released by pastes through isothermal conduction calorimetry, experiments included the assessment of the compressive strength of pastes, mortars, and concrete. In addition, X-ray diffraction (XRD) and backscattered scanning electron microscopy/energy dispersive X-ray (BSEM/EDX) were used to characterize the developed materials. The results showed that the type of solid activator has impact on the early-age strengths and kinetics of hybrid alkaline cements. It is worth mentioning that it was possible to produce a concrete paving block meeting European standard mechanical demands having a more sustainable binder with high fly ash content activated by a solid chemical compound of moderate alkalinity and replacing coarse natural aggregates with recycled aggregates. The commercial-scale production of these greener paving blocks using waste as raw material would contribute to a more circular and sustainable construction sector. © 2024 American Society of Civil Engineers., This work was financially supported by (1) Base Funding–UIDB/04708/2020 with DOI 10.54499/UIDB/04708/2020 (https://doi.org/10.54499/UIDB/04708/2020) of the CONSTRUCT–Instituto de I&D em Estruturas e Construções–funded by national funds through the FCT/MCTES (PIDDAC); and (2) Projects PDC2021-120771-I00/AEI/10.13039/501100011033/European Union Next Generation EU/PRTR (REVERDECE). Filipe Almeida wishes to thank FCT–Fundação para a Ciência e a Tecnologia for his research grant (SFRH/BD/05956/2021) with DOI 10.54499/2021.05956.BD (https://doi.org/10.54499/2021.05956.BD). The authors would like to thank Presdouro Pré-Esforçados Beira Douro, S.A. (São João de Vêr, Portugal) and RCD–Resíduos de Construção e Demolição, S.A. (Figueira da Foz, Portugal) for providing the recycled aggregates from construction and demolition waste, Eng. André Cruz for speeding up the supply of the fly ash, and Dr. Carlos Tavares from SEMAT/UM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transforming landfilled coal ash in ultralow clinker binders

  • Xiong, Luchang
  • Maltseva, O.
  • Fernández-Jiménez, Ana
  • Wan, Zhijun
  • Palomo, Ángel
The gradual shortage of fly ash caused by the closure of coal-fired power plants in some areas has stimulated increased research into novel pozzolanic supplementary cementitious materials (SCMs), with a particular focus on landfilled coal ash (LA). A novel hybrid alkaline cement (HAC) was developed using 70% LA and 30% ordinary Portland cement (OPC), together with small amounts of sodium sulfate and sodium citrate as sustainable hydration activators. The reaction kinetics, mineralogical composition, and microstructure of HACs were thoroughly investigated using conduction calorimetry analysis, strength testing, X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), scanning electron microscopy–energy-dispersive spectroscopy (SEM-EDS), and magic angle spinning–nuclear magnetic resonance (MAS–NMR). The effects of sodium citrate and sodium sulfate on the reaction process and product formation in the OPC–LA system were clearly identified. The retarding effect of citrate-Ca and accelerating effect of sulfate-Ca led to a modification of wavenumbers in the C–(A)–S–H gel IR bands, and consequently respectively played different roles on activating the LA. Results show that the strength performance of HACs (CA37SuCi group) even without ratio optimization achieve the level of P.O. 32.5. The cost and CO2 emission during laboratory level production of CA37SuCi group are 56.2% and 57.38% less than those of P.O. 42.5, respectively. An evaluation of technical, economic, and environmental aspects suggests that LA-based HACs can contribute significantly to energy conservation and emission reduction in the cement industry, while also offering potential solutions to the regional shortage of fly coal ash., This research has been conducted thanks to the sup-port of Spanish Ministry of Science and Innovation, Projects PDC2021-120771-I00/AEI/10.13039/501100011033/European Union Next Generation EU/PRTR(REVERDECE), the projects PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE (OBISUS), and the China Postdoctoral Science Foundation (Project No.:2024M763561)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Valorización de las cenizas de vertedero de central térmica en cementos y hormigones

  • Rojo Esteban, Alicia
  • Alonso López, M. del Mar
  • Gil-Maroto, A.
  • García Calvo, José Luis
  • Maltseva, O.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Trabajo presentado en las VI Jornadas de Jóvenes Científicos en Materiales de Construcción, celebradas en Madrid (España), los días 19 y 20 de mayo de 2025., El objetivo de este trabajo fue valorizar las cenizas de vertedero de central térmica en cementos y hormigones más sostenibles. Para ello se preparó una mezcla denominada FlyGlass (80% ceniza volante de vertedero + 15 % escoria de alto horno + 5 % activador alcalino) que se activó mecánicamente por molienda en un molino de bolas hasta obtener 90% de partículas inferiores a 20 micras. El conglomerante empleado fue una mezcla del 40% CEM II 42,5 + 60 % FlyGlass. Se evaluó el comportamiento mecánico a compresión en pastas, morteros y hormigones, empleando como referencia en todos los casos el cemento CEM II 42.5 (65-79% Clinker + 21-35% de Ceniza + Escoria). Los productos de hidratación se caracterizaron por DRX, FTIR, FRX y RMN. La cinética del proceso de hidratación se analizó por calorimetría de conducción isoterma y ultrasonidos. Por último, se elaboró un hormigón de 370 Kg/m3 con la mezcla cementante que se empleó para pavimentar un sector del aparcamiento del Instituto de Ciencias de la Construcción Eduardo Torroja. Los resultados obtenidos indican que las pastas realizadas con el cemento que tiene un 60% de FlyGlass alcanzan a 28 días unas resistencias a compresión de 71 MPa, mientras que los morteros alcanzan 42 MPa; Siendo ambos valores comparables al cemento de referencia. El hormigón elaborado para el pavimento presentó una resistencia a compresión a los 28 días de 35,4 MPa y a flexión de 5,4 MPa, en ambos casos comparables a las obtenidas en el hormigón de referencia (38,3 y 5,7 MPa, respectivamente)., Este trabajo ha sido financiado por la Agencia Española de Investigación (AEI), el Ministerio de Ciencia e Innovación y el FEDER (proyectos de investigación PDC2021-120771-I00/AEI/10.13039/ 501100011033 / European Union Next Generation EU/PRTR (REVERDECE) y proyecto PID2022-138637OB-C31/AEI/10.13039/501100011033/FEDER, UE. También se agradece la concesión de la beca predoctoral FPI PRE2022-000031, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling the hydration of ultra-low clinker cements: The impact of sodium salts additives

  • Xiong, Luchang
  • Chen, Bingrui
  • Fernández-Jiménez, Ana
  • Wan, Zhijun
  • Maltseva, O.
  • Palomo, Ángel
Sodium citrate and sodium sulfate are commonly used as weak and sustainable additives in hybrid alkaline cements (HACs). However, the combined effect of these chemicals on the hydration process of ultra-low clinker cements (basically made of fly ash) remains unclear. This study aims to fix a right dosage of sodium citrate and sodium sulfate, with the purpose of investigating the mechanisms by which different citrate-to-sulfate (C/S) ratios can control the hydration of high-volume landfilled coal ash based hybrid alkaline cements (LACs). The fluidity, yield stress, and strength performance of LACs pastes with varying C/S ratios were evaluated. In addition, the evolution of hydration products and heat release during hydration was analyzed to determine such mechanisms. By using ordinary Portland cement as a reference, the hydration processes of LACs activated with: i) sodium citrate; ii) sodium sulfate; and iii) a combination of both products, were divided into distinct stages. The hydration kinetics were then calculated and modeled. Results indicate that sodium citrate and sodium sulfate influence the early clinker hydration through some complexation and precipitation reactions with Ca(OH)2 (a product of hydration of the very small amount of clinker). These reactions alter the hydration behavior of LACs and eliminate the common induction period observed in regular cements. It's a consequence of these observations that optimizing the C/S ratio is a feasible strategy to produce LACs with good performance., This research has been conducted thanks to the support from the following projects: Spanish Ministry of Science and Innovation (Project No.: PDC2021-120771-I00); the China Postdoctoral Science Foundation (Project No.: 2024M763561); Fundamental Research Funds for the Central Universities (Project No.: 2025QN101) and the MoU between CSIC and the Chinese Institute of Coal Science. We would also like to thank the reviewers for their constructive comments, which have greatly helped improve the quality of the article., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydration mechanism of landfilled coal ash-based low-clinker cement and exploration of its functional application in coal mines

  • Xiong, Luchang
  • Wang, Liang
  • Wan, Zhijun
  • Chen, Bingrui
  • Chang, Lining
  • Fernández-Jiménez, Ana
  • Palomo, Angel
To address the activity deterioration, increased disposal costs, and potential environmental risks associated with long-term landfilling of coal ash, hybrid alkaline cements based on landfilled coal ash (LHACs) were prepared using high-replacement (≥70%) landfilled ash and low-replacement (≤30%) clinker as precursors. Mechanical-chemical grinding activation was employed, followed by the incorporation of weak-alkaline sodium salts (sodium sulfate and sodium citrate) to synthesize the binders under ambient curing conditions. The workability, mechanical performance, hydration behavior and kinetics, hydration mechanisms, as well as the associated economic and environmental benefits were systematically evaluated through flowability and setting-time tests, compressive strength measurements, X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), 29Si MAS-NMR, and isothermal calorimetry. The results show that the SC-LHACs system activated by the sodium citrate/sodium sulfate combination exhibits favorable basic properties, with a flowability of 99.8 mm, initial and final setting times of 82 and 147 min, and compressive strengths of 19.4 MPa at 2 d and 38.7 MPa at 28 d, meeting the requirements of P.O. 32.5 cement and approaching those of P.O. 42.5 cement. Microstructural analyses reveal that C-LHACs mainly form C-(A)-S-H gels, whereas S-LHACs and SC-LHACs predominantly generate (N,C)-(A)-S-H gels. The incorporation of sodium sulfate decreases the proportion of chain-structured to network-structured gels derived from clinker hydration and ash activation, thereby promoting continuous ash hydration and matrix densification. In terms of hydration heat evolution and kinetics, weak-alkaline sodium salts elevate the first exothermic peak, advance the main hydration peak, shorten the induction period, and increase the fraction of early heat release. The hydration process evolves from the typical nucleation–growth/interfacial/diffusion (NG-I-D) regime of ordinary cement to an interface-reaction/diffusion (I-D) dominated combined kinetic mode, which is well described by the Kondo kinetic model. Mechanistically, sodium citrate complexes Ca2+ while sodium sulfate induces precipitation and ion exchange reactions, synergistically regulating the pore-solution chemistry, mitigating the dilution effect caused by low clinker content, and enabling coupled clinker hydration and ash activation with continuous gel polymerization. Economic and environmental assessments further indicate that, compared with P.O. 42.5 cement, the production costs of S-LHACs and SC-LHACs are reduced to 29.1% and 43.8%, while their carbon emissions decrease to 34.2% and 42.6%, respectively. Overall, LHACs demonstrate good engineering applicability together with significant cost and carbon reductions, showing strong potential for high-volume utilization of landfilled coal ash and low-carbon functional materials for underground coal mine applications., Peer reviewed