Pasar al contenido principal

MORTEROS Y HORMIGONES SOSTENIBLES: RADIOACTIVIDAD NATURAL, EXHALACION DE RADON E INTERACCION CON EL MEDIO AMBIENTE

PID2020-116002RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Cements: Mechanical Properties, Microstructure and Radiological Behavior

  • Moreno de los Reyes, A.M.
  • Suárez-Navarro, José Antonio
  • Alonso López, M. del Mar
  • Gascó, Catalina
  • Sobrados, Isabel
  • Puertas, Francisca
The use of more eco-efficient cements in concretes is one of the keys to ensuring construction industry sustainability. Such eco-efficient binders often contain large but variable proportions of industrial waste or by-products in their composition, many of which may be naturally occurring radioactive materials (NORMs). This study explored the application of a new gamma spectrometric method for measuring radionuclide activity in hybrid alkali-activated cements from solid 5 cm cubic specimens rather than powder samples. The research involved assessing the effect of significant variables such as the nature of the alkaline activator, reaction time and curing conditions to relate the microstructures identified to the radiological behavior observed. The findings showed that varying the inputs generated pastes with similar reaction products (C-S-H, C-A-S-H and (N,C)-A-S-H) but different microstructures. The new gamma spectrometric method for measuring radioactivity in solid 5 cm cubic specimens in alkaline pastes was found to be valid. The variables involved in hybrid cement activation were shown to have no impact on specimen radioactive content. The powder samples, however, emanated Rn (a descendent of Ra), possibly due to the deformation taking place in fly ash structure during alkaline activation. Further research would be required to explain that finding., Funding: This study was funded by the Spanish Ministry of Science and Innovation and the country’s National Research Agency, as well as the European Regional Development Fund (AEI/FEDER/EU) under research projects BIA2016-77252-P and PID2020-116002RB-I00, Ana María Moreno de los Reyes participated in the study under pre-doctoral grant BES-2017-081306 awarded by the National Research Agency., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Approach to Determine the Activity Concentration Index in Cements, Fly Ashes, and Slags on the Basis of Their Chemical Composition

  • Caño, Andrés
  • Suárez-Navarro, José Antonio
  • Puertas, Francisca
  • Fernández-Jiménez, Ana
  • Alonso López, M. del Mar
The manufacture of Portland cement entails high energy and environmental costs, and various solutions have been implemented in recent years to mitigate this negative impact. These solutions include improvements in the manufacture of cement clinker or the use of supplementary cementitious materials (SCMs), such as fly ash (FA) or slag as a replacement for a portion of the clinker in cement. The incorporation of these SCMs in cement may increase its radiological content as they are naturally occurring radioactive materials (NORMs). The Activity Concentration Index (ACI) is a screening tool established in the European EURATOM Directive 2013/59 to determine the radiation protection suitability of a final construction material. The ACI is determined by the activity concentrations of 226Ra, 232Th and 40K, usually determined by gamma spectrometry. The methodology of gamma spectrometry is accurate and appropriate, but this technique is not available in all laboratories. For this reason, and taking into account that there is a relationship between the chemical and radiological composition of these building materials, a new approach is proposed to determine the radiological content of these materials from a chemical analysis such as X-ray fluorescence (XRF). In this paper, principal component analysis (PCA) is used to establish the relationships between the chemical composition and radiological content of cements, FAs, and slags of different natures. Through PCA it was possible to group the cements based on two variables: CaO content and Fe2O3–Al2O3–TiO2 content. A lower correlation was observed for the FAs and slags, as the sample scores were centered around the origin of the coordinates and showed greater dispersion than the cements. The clusters obtained in the HJ–Biplots allowed the determination, using multiple regression, of models relating the activity concentration of 226Ra, 232Th (212Pb), and 40K to the oxide percentages obtained for the three matrices studied. The models were validated using five cements, one FA and one slag with relative percentage deviations (RSD(%)) equal to or less than 30% for 89% of the activity concentrations and 100% of the ACI determined., This research has been conducted thanks to the support of Projects PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX) and PDC2021-120771-I00/AEI/10.13039/501100011033/European Union Next Generation EU/PRTR (REVERDECE). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes and the government of the Autonomous Community of Madrid for the Contrato de Garantía Juvenil (PEJ-2020-TL/AMB-19344) of Queralt Belen Marzal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hydration of CAC pastes at high temperature

  • Pachón Montaño, Alicia
  • Alonso López, M. del Mar
  • Chhaiba, Salma
  • Marzal García, Queralt
  • Jiménez, José Antonio
  • Llorente, Irene
  • Blanco-Varela, María Teresa
Trabajo presentado al 16th International Congress on the Chemistry of Cement (ICCC): “Further Reduction of CO2 -Emissions and Circularity in the Cement and Concrete Industry”, celebrado del 18 al 22 de septiembre de 2023 en Bangkok (Thailand)., Calcium aluminate cements or CACs are of great interest in a wide range of areas, such as industrial applications, waste encapsulation and even restoration of heritage sites. The hydration products of CAC are known to vary as a function of temperature and humidity conditions. In this study, the hydration process of a CAC cured at 70°C under high humidity conditions and different water/cement ratios has been investigated. The aim of using these conditions was to directly obtain katoite-type cubic hydrates, together with the development of gibbsite. The different water/cement ratios used have given rise to different proportions of crystalline and amorphous hydrated phases. The percentages of hydration products formed have been identified and quantified in relation to the mechanical strength and porosity of the pastes at different curing ages. The stability of the pastes subjected to two curing conditions, under water and in laboratory conditions, for 2 years, has also been studied., The authors wish to thank the support of Project PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Evaluation of the Radioactive Content of Ashes Obtained from the Use of Fuels from Recycled Materials by Co-Processing in the Cement Industry

  • Suárez-Navarro, José Antonio
  • Sanjuán, Miguel Ángel
  • Mora Peris, Pedro
  • Alonso López, M. del Mar
The co-processing of different wastes as fuels in the manufacture of cement clinker not only meets the objectives of a circular economy but also contributes to the reduction in CO2 emissions in the manufacture of Portland cement. However, waste used as alternative fuels, such as sludge or organic-rich residues, may contain naturally occurring radionuclides that can be concentrated during the combustion process. In this study, the presence of natural radionuclides (radioactive series of uranium, thorium, and 40K) and anthropogenic radionuclides (137Cs) in these wastes has been investigated by gamma spectrometry. Possible relationships between the radioactive content and the obtained chemical composition, determined by X-ray fluorescence, have also been studied by applying a principal component analysis (PCA). The results showed that the wastes with the highest radioactive content were sewage sludge with activity concentrations of 238U and 210Pb of 321 ± 38 Bq kg−1 and 110 ± 14 Bq kg−1, respectively. A correlation between radioactive content and Fe2O3 concentration was also observed. The annual effective dose rates to workers for the ashes estimated from the ash content ranged from 0.0033 mSv to 0.092 mSv and therefore do not pose a risk to workers as they are lower than the 1 mSv per year limit for the general public (DIRECTIVE 2013/59/EURATOM)., This research has been conducted thanks to the support of Project PID2020-116002RB 100/AEI/10.13039/501100011033 (HORRADIONEX) (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

226Ra activity concentration determined directly from the 186 keV photopeak using gamma spectrometry and a neural network

  • Suárez-Navarro, José Antonio
  • Caño, Andrés
  • Alonso López, M. del Mar
  • Expósito-Suárez, Víctor Manuel
  • Benavente, José Francisco
  • Hernáiz, Guillermo
Determining Ra activity concentration directly from the 186 keV photopeak using gamma spectrometry avoids the 21-day waiting time required for indirect calculation from Pb or Bi. Calculation methods using the 186 keV photopeak, suppressing the U interference, are satisfactory but do not allow the analyst to correct for possible biases due to the calculation. This paper therefore examines the use of an alternative method based on a neural network that allows enrichment and monitoring of the solution to the problem, taking into account the concentrations of reference activities or those obtained from Pb in the samples analysed. The Ra counts at the 186 keV peak were determined by fitting two Gaussian functions whose figure of merit was minimised using the Levenberg–Marquardt algorithm. The results obtained were validated and fed into the neural network, using 70% for training and 30% for testing. Network learning was estimated using samples of comparative exercises, which were analysed and then used to train the network. The possibility of increasing the number of values used to train the network was also investigated using interpolation of linear and quadratic splines. The accuracy and precision of the Ra activity concentrations obtained by the neural network, as determined by Student's pair-wise t-test and Fisher's F-test, in samples from different intercomparison exercises were statistically comparable (p > 0.05) at 60% and 73%, respectively. Finally, the percentage of acceptability of the Ra activity concentrations with respect to the usual criteria of intercomparison exercises (E ≤ ±1 and D% ≤ ±20%) was 55%, which is comparable to the 60% obtained by the numerical algorithm developed in a previous study., This research has been conducted thanks to the support of Project PID2020-116002RB-100/AEI/10.13039/501100011033 ( HORRADIONEX ) (Spain). The authors would also like to thank the Spanish Ministry of Science and Innovation for the internal CIEMAT Project “ Caracterización Radiológica y Dosimétrica de terrenos en la Comunidad de Madrid ” ( 353-M_CU_PILAR ). Further thanks to the MICIM (Spain) for the pre-doctoral contract ( PRE2021-098535 ) of Andrés Caño Blanes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Foundry by-products: Alternative materials for ceramic tiles. Technical, radiological and environmental assessment

  • Quereda, M.F.
  • Vicent, M.
  • Suárez-Navarro, José Antonio
  • Clarens, F.
  • Mesas, M.
  • Alonso López, M. del Mar
The aim of this study is to assess the feasibility of using foundry by-products in porcelain tiles. This feasibility has been evaluated by three different perspectives: technical, radiological and environmental. Firstly, given that the main impurities in foundry by-products are carbon and organic compounds, thermal treatments that successfully reduce carbon and organic compounds have been evaluated. Subsequently, both calcined and uncalcined by-products have been characterised from a technological and radiological point of view and finally, porcelain tile compositions with both calcined and uncalcined by-products have been obtained. These compositions were fully characterised and their performance in the manufacturing process has been evaluated. The environmental impacts of this recycling process were also assessed by means of a life cycle assessment. The results confirm that foundry by-products can partially replace sand in porcelain tile bodies., This research has been conducted thanks to the support of projects PID2020-116002RB100/AEI/10.13039/501100011033 (HORRADIONEX) financed by Spanish Ministry of Science and Innovation and LIFE14 ENV/ES/000252 (LIFE FOUNDRYTILE) financed by the European Union within the LIFE Environment and Resource Efficiency Programme and supported by IVACE (GVA Valencian Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of a standard efficiency using the ISOCS uncertainty estimator for calculating the activity concentration of 226Ra, 232Th, and 40K in concrete

  • Caño, Andrés
  • Suárez-Navarro, José Antonio
  • García Calvo, José Luis
  • Marzal García, Queralt
  • Alonso López, M. del Mar
The Activity Concentration Index (ACI) requires knowledge of the activity concentrations of Ra, Th (Pb), and K, typically determined through gamma spectrometry. The inherent heterogeneity of concrete makes the determination of gamma counting efficiency a complex problem. For this reason, this study employed the ISOCS Uncertainty Estimator (IUE), which allows for probabilistic calculations based on variations in parameters affecting counting efficiency, such as dimensions, density, and composition. The IUE enabled the estimation of a representative efficiency for a standard concrete configuration applicable to concrete specimens and samples from existing structures. The results obtained with the proposed efficiency for natural radionuclides of the uranium and thorium series, along with K, compared to the classical material grinding method, showed no significant differences in the mean and variance. The maximum differences observed when applying regression analysis were less than 16 %, thus validating the representative efficiency obtained with the IUE., This research has been conducted thanks to the support of Project PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes and the government of the Autonomous Community of Madrid for the Contrato de Garantía Juvenil (PEJ-2020-TL/AMB-19344) of Queralt Belen Marzal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prediction models for radiological characterization of natural aggregates based on chemical composition and mineralogy

  • Caño, Andrés
  • Alonso López, M. del Mar
  • Pachón Montaño, Alicia
  • Marzal García, Queralt
  • Sousa, L.
  • Suárez-Navarro, José Antonio
  • Hernáiz, Guillermo
The radiological characterization of aggregates used in construction materials is essential to determine their suitability from a radiological protection perspective and to ensure their safety for health and the environment. While the activity concentrations of radionuclides present in construction materials are typically determined using gamma spectrometry, an alternative approach involves the development of statistical methods and predictive models derived from the chemical composition of the material. A total of 39 aggregates used in construction of various types (siliceous, carbonatic, volcanic, and granitic) have been analyzed, correlating their chemical compositions obtained through X-ray fluorescence (XRF) with the activity concentrations of natural radionuclides measured via gamma spectrometry using principal component analysis (PCA). The results obtained allowed for the observation of an inversely proportional relationship between the chemical composition of the grouping of siliceous and carbonatic aggregates and the content of radionuclides. However, the set of granitic aggregates showed a strong correlation with the natural radioactive series of uranium, thorium, and K. Conversely, the radionuclide content of volcanic aggregates was independent of their chemical composition. The results obtained from the PCA facilitated the development of different models using multiple regression analysis. The chemical parameters obtained in the proposed models were related to the typical mineralogy in each grouping, ranging from primary minerals such as feldspars to accessory minerals such as anatase, apatite, and pyrolusite. Finally, the models were validated using independent samples from those used to determine the models, achieving RSD (%) values ≤ 30% in 50% of the activity concentrations of Ra, Th(Pb), and K, as well as the estimated ACI., This research has been conducted with the support of Project PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radon diffusion coefficient of cement pastes made with recycled thermal carbon fly ashes

  • Castaño-Casco, E.
  • Caño, Andrés
  • Suárez-Navarro, José Antonio
  • Gutiérrez-Álvarez, I.
  • Barba-Lobo, A.
  • Bolívar, J.P.
  • Alonso López, M. del Mar
The use of supplementary cementitious materials (SCMs) is one of the most used ways to reduce CO emissions associated with the production of Portland cement. However, many of these SCMs are Naturally Occurring Radioactive Materials (NORM), which present naturally occurring radionuclides. Radon emission from these types of materials, together with radon infiltration from the ground through them, is one of the main sources of indoor radon. These pathways through the building materials are regulated by the radon diffusion coefficient, D. In this work, the radon properties of 7 cement pastes (at 2 and 28 days) were studied in function of the technical properties to determine their suitability as building and insulating materials against radon. Two main results were found: The D of the pastes changed by an order of magnitude between those with a 2-day curing time and those with a 28-day curing time, the latter being less permeable to radon, and there was also a decrease in D as the percentage of superplasticiser admixture increased, due to the reduction in the porosity of the final pastes and the reduction in radon permeability. The lowest D value obtained was of (4.3 ± 0.4) ·10 m s for the paste with a 70% of cement, 30% of fly ash, 0.6% of superplasticiser admixture and 28 days of curing. In conclusion, it was found that different characteristics of the paste production, which influence the final microstructure, can produce cements containing NORM with permeabilities to radon low enough to be used as a radon barrier., This research was partially funded by different projects: the project funded by the Nuclear Safety Council (CSN) “Radon exhalation from building materials; Radiological impact and corrective measures (EXRADON)” (PR-047-2021), by grant PID2020-116461RB-C21 (RAD REMOVE) funded by MICIU/AEI/10.13039/501100011033, by grant TED2021-130361B–I00 (RESTOREHU) funded by MICIU/AEI/ 10.13039/501100011033, as finally by research Project PID2020- 116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX) sup ported the Spanish Ministry of Science and Innovation, the Spanish National Research Agency (AEI). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes. We also thank Queralt Belén Marzal for her help in laboratory tests., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Chemical composition and radionuclide activity concentration data for NORM materials used in construction [Dataset]

  • Alonso López, M. del Mar
  • Suárez Navarro, Jose Antonio
  • Caño, Andrés
  • Marzal García, Queralt
  • Vincent, M.
  • Blanco-Varela, María Teresa
  • Puertas, Francisca
  • Sanjuán, Miguel Ángel
  • Suárez Navarro, M.J.
  • Mora, J.C.
  • Pujol, Lluís
Table (HORRADIONEX XRF.csv): Dataset containing the chemical composition (major and trace elements) of construction materials with natural radioactivity (NORM), measured by X-ray fluorescence (XRF). Table (gamma horradionex.pdf): Dataset containing radionuclide activity concentration data (e.g., ²³⁸U, ²³²Th, ⁴⁰K) for the same materials, measured by high-resolution gamma spectrometry. Uncertainties are reported with a coverage factor k=2. Data were collected between 2020 and 2025 in Spain, Italy, China, Morocco, Czechia, France, and Portugal. Both files refer to the same set of samples and are part of the HORRADIONEX research project (PID2020-116002RB-100, funded by AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variation of the emanation factor of 222Rn in different types of cementitious pastes

  • Caño, Andrés
  • Suárez Navarro, José Antonio
  • Expósito-Suárez, Víctor Manuel
  • Benavente, José Francisco
  • Hernáiz, Guillermo
  • Barragán, Marta
  • Suárez Navarro, M.J.
  • Marzal García, Queralt
  • Alonso López, M. del Mar
The determination of the activity concentration of 222Rn is related to its emanation and the equilibrium reached with its short-lived gamma-emitting progeny, 214Pb and 214Bi. Previous studies conducted with hybrid and alkali-activated cements, both utilizing fly ash (FA), reflected 226Ra/214Pb ratios significantly greater than 1. This study further investigates this disequilibrium by determining the 226Ra/214Pb ratios in different cement pastes: (i) magnesium phosphate, (ii) blended with FA, (iii) hybrid with FA, (iv) alkali-activated with FA and metakaolin (MK) using various alkaline activators. The samples were measured by gamma spectrometry both in solid form and after grinding. The results showed 226Ra/214Pb ratios of 1.3 for the ground pastes manufactured with 100% FA and using NaOH as the activator at different molarities (8 M, 10 M, and 12 M). Measurement of the samples with the addition of 2% (w/w) activated carbon showed that this effect was neutralized, resulting in ratios of 1, indicating equilibrium between 226Ra and 214Pb. The measurement of the emanation coefficient (Fe) for the powdered solids obtained from the ground cubes showed that the emanations were higher than those of the anhydrous materials (cement (C), FA, and MK). This high emanation is primarily caused by NaOH activation, which induces microstructural changes in the cement pastes, leading to increased radon release. The highest emanations were 36.2% for samples derived from pastes alkali-activated with NaOH. Additionally, it was observed that 222Rn was lost by 5% from the cylindrical containers used for gamma spectrometry measurements when the Fe was 0.20 (20% emanation)., This research has been conducted thanks to the support of Project PID2020-116002RB-100/ AEI/10.13039/501100011033 (HORRADIONEX). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes and the government of the Autonomous Community of Madrid for the Contrato de Garantía Juvenil (PEJ-2020-TL/AMB-19344) of Queralt Belén Marzal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering assessment of sustainable building concretes with red mud and copper slag: mechanical performance, heavy metal leaching and radiological evaluation

  • Caño, Andrés
  • Almeida, Mariana M.
  • Suárez Navarro, José Antonio
  • Labrincha J.A.
  • Novais, Rui Miguel
  • Alonso López, M. del Mar
The decarbonisation of the cement sector requires the adoption of supplementary cementitious materials, many of which remain underexplored despite accumulating in large volumes in landfills. From a sustainable engineering perspective, valorising these resources is key to advancing low-carbon building practices. This study investigates the use of industrial by-products – red mud and copper slag – in Portland cement–based and alkali-activated concretes to evaluate their suitability for building and civil engineering applications. Mechanical performance, heavy metal leachability under different aqueous environments, and radiological protection aspects were assessed. Concretes were produced with siliceous and granitic aggregates, the latter requiring careful engineering evaluation due to naturally occurring radioactive elements. This work contributes to addressing a knowledge gap, as it provides a combined engineering assessment of heavy metal leaching and radiological behaviour in red mud and copper slag concretes for building use. Leached heavy metal and radionuclide concentrations remained below regulatory limits for all formulations, confirming their safety as building materials. Portland cement, blended, and 100% slag alkali-activated concretes achieved compressive strengths of ∼30 MPa, suitable for structural building and civil engineering applications. Mixes containing red mud and slag reached 18–23 MPa, appropriate for non-structural building components. These results support the safe use of red mud and copper slag as sustainable engineering materials for low-carbon building construction., This research has been conducted with the support of Project PID2020-116002RB-100/AEI/10.13039/501100011033 (HORRADIONEX). This work was developed within the scope of the project CICECO Aveiro Institute of Materials, UID/50011 & LA/P/0006/ 2020 (DOI 10.54499/LA/P/0006/2020), financed by national funds through the FCT/MCTES (PIDDAC). The authors would also like to thank the MICIM for the pre-doctoral contract (PRE2021-098535) of Andrés Caño Blanes, Peer reviewed