Pasar al contenido principal

DESARROLLO Y APLICACION DE ENSAYOS NO DESTRUCTIVOS BASADOS EN ONDAS MECANICAS PARA LA EVALUACION Y MONITORIZACION DE REOLOGIA Y AUTOSANACION EN MATERIALES CEMENTANTES

BIA2017-87573-C2-1-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonlinear Acoustic Spectroscopy and Frequency Sweep Ultrasonics: Case on Thermal Damage Assessment in Mortar

  • Genovés, V.
  • Escobar, D.
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] An exhaustive study on thermal damage of Portland cement-based materials is addressed. Damage carried out at different temperatures on concrete between 40 and 525 degrees C were assessed by means of microstructural, physical and nondestructive tests. Microstructural analysis (thermogravimetry and scanning electron microscopy) showed the principal changes of the Portland cement hydrated products for the different analysed temperatures. Compressive and flexural strengths remained constant or even increased at a low heating temperature range, while the mass loss increases. Dilatometry analysis revealed important information about deformation incompatibilities between the paste and the aggregate. These results have been correlated with nondestructive tests: nonlinear impact resonance acoustic spectroscopy (NIRAS) and ultrasonic measures. The dynamic modulus and ultrasonic pulse velocity have closely predicted the linear stiffness decay of the specimens. However, hysteretic parameter from NIRAS analysis exhibited a different trend from stiffness-related parameters, keeping constant until 250>degrees C and suffering a huge increasing for 400 and 525 degrees C. Ultrasonic attenuation computed with a broadband ultrasonic signal (chirp) revealed interesting information about scattering components inside the material, and is sensitive to interfacial transition zone between aggregate and paste in a large range of frequencies. The correlation between microstructural, mechanical and nondestructive techniques were carried out successfully. Nonlinear vibration and ultrasonic attenuation are non-conventional parameters that gave specific information about a complex damage process, such as a thermal attack in highly heterogeneous materials (e.g. Portland cement composites)., This work has been supported by the Spanish Administration under Grants, BES2015-071469, under the ONDATEST coordinated project, BIA2014-55311-C2-1-P and BIA2014-55311-C2-2-P. Thanks are given to FEDER funds for co-funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Study of Coupling Techniques in Lamb Wave Testing of Metallic and Cementitious Plates

  • Vazquez-Martinez, Santiago
  • Gallardo-Llopis, Carles
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Bosch Roig, Ignacio|||0000-0003-3190-3635
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[Otros] Lamb waves have emerged as a valuable tool to examine long plate-like structures in a faster way compared to conventional bulk wave techniques, which make them attractive in non-destructive testing. However, they present a multimodal and dispersive nature, which hinders signal identification. Oblique incidence is one of the most known methods to generate and receive Lamb waves and it is applied in different experimental arrangements with different types of sensors. In this work, several setups were conducted and compared to determine the optimal ones to launch and detect ultrasonic Lamb waves, especially in non-homogeneous specimens. The chosen arrangements were contact with angle beam transducers, immersion in a water tank, localised water coupling using conical containers and air coupling. Plates of two different materials were used, stainless steel and Portland cement mortar. Theoretical and experimental dispersion curves were compared to verify the existence of Lamb modes and good correspondence was achieved., This research was funded by the Spanish Administration, grants number BES-2015-071958 and BIA2017-87573-C2.