Pasar al contenido principal

MODIFICACION DE FOTOCATALIZADORES DE OXIDOS METALICOS NANOESTRUCTURADOS PARA LA ELIMINACION DE FARMACOS Y PRODUCCION ENERGETICA

CTQ2016-79203-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrochemical removal of chlorfenvinphos by using WO3 nanorods: Influence of annealing temperature and operation pH

  • Fernández Domene, Ramón Manuel
  • Roselló-Márquez, Gemma
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] A visible-light driven photoelectrochemical degradation process has been applied to a solution polluted with the organophosphate insecticide chlorfenvinphos. Different WO3 nanosheets/nanorods have been used as photoanodes. These nanostructured electrodes have been fabricated by anodization of tungsten and, subsequently, they have been subjected to a thermal treatment (annealing). The combined influence of annealing temperature (400¿°C and 600¿°C) and operation pH (1 and 3) on the photoelectrocatalytic behavior of these nanorods has been examined through a statistical analysis. Morphological, structural and photoelectrochemical characterizations have also been carried out. The chlorfenvinphos degradation efficiency depended both on annealing temperature and, specially, operation pH. At pH 1 and using an annealing temperature of 600¿°C, chlorfenvinphos has been effectively degraded following pseudo-first order kinetics with a coefficient of 7.8¿×¿10¿3¿min¿1, and notably mineralized (more than 65% of Total Organic Carbon decrease)., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Ramon M. Fernandez Domene thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Visible-light photoelectrodegradation of diuron on WO3 nanostructures

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Ramírez-Grau, R.
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The degradation of pesticide diuron has been explored by photoelectrocatalysis (PEC) under visible light illumination using two different WO3 nanostructures, obtained by anodization of tungsten. The highest degradation efficiency (73%) was obtained for WO3 nanosheets synthesized in the presence of small amounts of hydrogen peroxide (0.05 M). For that nanostructure, the kinetic coefficient for diuron degradation was 133% higher than that for the other nanostructure (anodized in the presence of fluoride anions). These results have been explained by taking into account the different architecture and dimensions of the two WO3 nanostructures under study., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R) and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of electrolyte temperature on the synthesis of iron oxide nanostructures by electrochemical anodization for water splitting

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Iron oxide nanostructures are an attractive option for being used as photocatalyst in photoelectrochemical applications such as water splitting for hydrogen production. Nanostructures can be obtained by different techniques, and electrochemical anodization is one of the simplest methods which allows high control of the obtained morphology by controlling its different operational parameters. In the present study, the influence of the electrolyte temperature during electrochemical anodization under stagnant and hydrodynamic conditions was evaluated. Temperature considerably affected the morphology of the obtained nanostructures and their photoelectrochemical behavior. Several techniques were used in order to characterize the obtained nanostructures, such as Field Emission Scanning Electron Microscopy (before and after the annealing treatment in order to evaluate the changes in morphology), Raman spectroscopy, photocurrent vs. potential measurements and Mott-Schottky analysis. Results revealed that the nanostructures synthesized at an electrolyte temperature of 25 degrees C and 1000 rpm are the most suitable for being used as photocatalysts for water splitting. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved., The authors would like to express their gratitude for the financial support granted by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical formation of novel TiO2-ZnO hybrid nanostructures for photoelectrochemical water splitting applications

  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Villanueva-Pascual, M.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, hybrid ZnO-TiO2 nanostructures have been synthesised by means of a simple electrochemical anodisation of titanium and subsequently ZnO electrodeposition. The influence of Zn(NO3)(2) concentration and temperature during the electrodeposition process was evaluated. Different techniques were used to analyse the synthesised nanostructures, notably Field Emission Scanning Electron Microscopy (FE-SEM) with Energy-dispersive X-ray spectroscopy (EDX) and Confocal Microscopy with Raman spectroscopy coupled with an Atomic Force Microscope. Photoelectrochemical water splitting tests were also performed at the hybrid nanostructures. According to the results, the photoelectrochemical response of the specimens increases with the addition of ZnO, besides the hybrid nanostructures obtained at 25 degrees C and using a Zn(NO3)(2) concentration of 1 mM showed photocurrent densities 80% higher than the ones obtained for TiO2 nanotubes. Analysis of Variance of the data confirms the obtained results., Authors thank for the financial support to the Ministerio de Economía y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Authors also thank the Generalitat Valenciana for its financial support through the project: IDIFEDER/018/044 co-finance by the European Social Fund. Authors also thank to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramón M. Fernández Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Formation of ZnO nanowires by anodization under hydrodynamic conditions for photoelectrochemical water splitting

  • Batista-Grau, Patricia
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The present work studies the influence of hydrodynamic conditions (from 0 to 5000 rpm) during Zn anodization process on the morphology, structure and photoelectrocatalytic behavior of ZnO nanostructures. For this purpose, analysis with Confocal Laser-Raman Spectroscopy, Field Emission Scanning Electron Microscope (FE-SEM) and photoelectrochemical water splitting tests were performed. This investigation reveals that hydrodynamic conditions during anodization promoted the formation of ordered ZnO nanowires along the surface that greatly enhance its stability and increases the photocurrent density response for water splitting in a 159% at the 5000 rpm electrode rotation speed., Authors would like to express their gratitude for the financial support to the Generalitat Valenciana and to the European Social Fund within the subvention to improve formation and employability of technical and management staff of I + D (GJIDI/2018/A/) and for its financial support through the project: IDIFEDER/018/044. Authors also thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the cofinance by the European Social Fund. Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cathodoluminescence characterization of Zno/Zns nanostructures anodized under hydrodynamic conditions

  • Sanz-Marco, Arturo
  • Sánchez Tovar, Rita
  • Montes Bajo, Miguel
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] ZnO/ZnS nanostructures were successfully synthesized by a simple electrochemical anodization of zinc in a glycerol based electrolyte containing sulfide-ammonium fluoride. The influence of different hydrodynamic conditions and anodization potentials during anodization on the morphological and electronic properties of the obtained ZnO/ZnS nanostructures was studied. The anodized samples were characterized using confocal Raman microscopy, X-Ray Diffraction (XRD), Field Emission Scanning Electronic Microscopy (FE-SEM), cathodoluminescence (CL), and photoelectrochemical water splitting tests under standard AM 1.5 conditions. The results showed that hydrodynamic conditions and higher potentials promoted the formation of ZnO/ZnS nanotubes with both higher sulphur content and crystalline defect density, which reduces the near band edge transition value of the materials and improves the photoelectrochemical activity for water splitting. Additionally, the higher photocurrent densities for water splitting were obtained for the samples anodized at the highest anodization potential and under hydrodynamic conditions, increasing in a 71% for the nanostructures anodized at 1000 rpm when the anodization potential changes from 20 to 40 V. (c) 2018 Elsevier Ltd. All rights reserved., Authors thank to the financial support to the Ministerio de Economia y CompetitividadMinisterio de Economia y Competitividad (Project code: CTQ2016-79203-R) and for the co-finance by the European Social Fund and to Dr. Luis Villaescusa Alonso for providing technical support with the XRD.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of a pesticides mixture solution (chlorfenvinphos and bromacil) by WO3 nanosheets

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • García-Carrión, Sergio
  • Lucas-Granados, Bianca
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] A photoelectrocatalyst consisting of WO3 nanosheets or nanorods has been synthesized by electrochemical anodization under hydrodynamic conditions, and has been used for the degradation of two toxic pesticides: chlorfenvinphos and bromacil. Nanostructures have been characterized by FESEM and Raman spectroscopy. Photoelectrochemical degradation tests have been carried out both for individual pesticide solutions and for a mixture solution, and the concentration evolution with time has been followed by UV¿Vis spectrophotometry. For individual pesticides, pseudo-first order kinetic coefficients of 0.402 h¿1 and 0.324 h¿1 have been obtained for chlorfenvinphos and bromacil, respectively, while for the mixture solution, these kinetic coefficients have been 0.162 h¿1 and 0.408 h¿1. The change in behavior towards pesticide degradation depending on whether individual or mixture solutions were used might be indicative of a competitive process between the two pesticide molecules when interacting with the WO3 nanostructures surface or when approaching the semiconductor/electrolyte interface., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund. Ramon M. Fernandez Domene also thanks the UPV for the concession of a postdoctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrocatalyzed degradation of organophosphorus pesticide fenamiphos using WO3 nanorods as photoanode

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this study, WO3 nanostructures were synthesized by the electrochemical anodization technique to use them on the degradation of persistent organic compounds such as the pesticide fenamiphos. The acids electrolyte used during the anodization were two different: 1.5 M H2SO4-0.05 M H2O2 and 1.5 M CH4O3S-0.05 M H2O2. Once the samples have been manufactured, they have been subjected to different tests to analyze the properties of the nanostructures. With Field Emission Scanning Electron Microscopy (FESEM) the samples have been examined morphologically, their composition and crystallinity has been studied through Raman Spectroscopy and their photoelectrochemical behaviour by Photoelectrochemical Impedance Spectroscopy (PEIS). Finally, degradation tests have been carried out using the technique known as photoelectrocatalysis (PEC). The conditions that were applied in this technique were a potential of 1 V-Ag/AgCI and simulated solar illumination. The degradation process was monitored by UV-Visible and High-Performance liquid Chromatography (HPLC) to control the course of the experiment. The nanostructures obtained with 1.5 M CH4O3S-0.05 M H2O2 electrolyte showed a better photoelectrochemical behaviour than nanostructures synthesized with 1.5 M H2SO4-0.05 M H2O2. The fenamiphos degradation was achieved at 2 h of experiment and the intermediate formation was noticed at 1 h of PEC experiment., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT) and the Generalitat Valenciana for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Ramon M. Fernandez Domene also thanks the UPV for the concession of a post-doctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elimination of pesticide atrazine by photoelectrocatalysis using a photoanode based on WO3 nanosheets

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The photoelectrocatalytic (PEC) degradation of a persistent and toxic herbicide, atrazine, has been investigated by using a novel and high-performance WO3 nanostructure in the form of nanosheets/nanorods as photoanode. The nanostructure has been synthesized by anodization in acidic media in the presence of a very small amount (0.05 M) of H2O2, and its morphology, as well as its electrochemical and photoelectrochemical properties have been characterized. Atrazine was completely degraded after similar to 180 min of reaction following pseudo-first order kinetics, and 2-hydroxyatrazine was identified as the main intermediate species. Moreover, the s-triazine ring in cyanuric acid (the final intermediate of atrazine degradation and very stable) was partially broken according to the obtained results, indicating the excellent PEC behavior of this WO3 nanostructure., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R) and for the co-finance by the European Social Fund and to Dr. Carlos Carbonell Alcaina for the use of the HPLC and for providing technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of annealing conditions on the photoelectrocatalytic performance of WO3 nanostructures

  • Roselló-Márquez, Gemma
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nanostructured WO3 photoanodes have been synthesized by electrochemical anodization under controlled hydrodynamic conditions in acidic media in the presence of 0.05 M H2O2. Subsequently, samples have been subjected to a thermal treatment (annealing) at different temperatures (400 degrees C, 500 degrees C and 600 degrees C) and under different gaseous atmospheres (air, N-2, Ar). The influence of these annealing conditions on the morphology, crystallinity, photoelectrochemical behavior and dopant chemistry of the different photoanodes has been investigated through Electronic Microscopy, Raman Spectroscopy, Photoelectrochemical Impedance Spectroscopy and Mott-Schottky analysis. In general, higher annealing temperatures resulted in samples with higher degrees of crystallinity, which in turn favored the transport of electron-hole pairs through the semiconducting photoanodes. Besides, an increase in annealing temperature implied higher densities of donor species within the samples structure, which can explain the observed enhancement in charge transfer. Annealing temperature was observed to have a more marked impact on the photoelectrocatalytic performance of WO3 nanostructures than the gaseous atmosphere., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R; for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund). Authors would also like to thank the Ministerio de Ciencia, Innovacion y Universidades (Project Code: CTQ2017-90659-REDT (MEIS/AEI)). Ramon M. Fernandez Domene also thanks the UPV for the concession of a postdoctoral grant (PAID-10-17) and Gemma Rosello Marquez also thanks the Generalitat Valenciana for the concession of a pre-doctoral grant (ACIF/2018/159).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Reynolds number on TiO2 nanosponges doped with Li+ cations

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
[EN] Anatase TiO2 nanosponges have been synthesized by anodization of Ti, and Li+ cations have been inserted in these nanostructures. The influence of hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during anodization has been studied. Li-Doped TiO2 nanosponges were characterized by field emission scanning electron microscopy (FE-SEM), Raman confocal microscopy, electrochemical impedance spectroscopy (EIS) and Mott¿Schottky analysis (M¿S). The photoelectrochemical performance and resistance to photocorrosion were also measured. Li¿TiO2 nanosponges proved to be better photocatalysts for water splitting than Li¿TiO2 nanotubes. Moreover, the photoelectrochemical behavior of the Li-doped nanosponges improved as the Reynolds number increased., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R) and its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and acknowledge co-funding by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A pH Study for the Degradation of Acetaminophen with Iron Oxide Nanostructures

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Nowadays, there is an increasing interest in the degradation of organic compounds in wastewater, since they are detrimental for the water quality. Different metal oxides have been studied as photocatalysts in the photoelectrocatalytic degradation of pharmaceutical products using UV light. Iron oxide nanostructures are a promising option in this field since their band gap (~ 2.1 eV, corresponding to ~590 nm) can absorb visible light, which in turn allows the degradation by using sunlight. Iron oxide nanostructures are known to be stable in alkaline solutions, but some organic compounds can vary their structure with pH. Then, a pH study is needed in order to stablish the optimum value to guarantee both the nanostructures and the organic molecule stability. In this work, acetaminophen (more known as paracetamol) is studied in different pH media (from pH 9 to pH 13) in order to evaluate the viability of iron oxide nanostructures as photocatalysts in the acetaminophen degradation process. Results showed that pH is a determinant parameter in the degradation process since the paracetamol UV-Vis spectrum varied with it. However, a pH compromise value is stablished in order to ensure the viability of the usage of iron oxide nanostructures in the acetaminophen degradation proces, The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economía y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramón M. Fernández Domene.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

TiO2 Nanostructures for Photoelectrocatalytic Degradation of Acetaminophen

  • Borràs-Ferrís, Joan
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Advanced oxidation processes driven by renewable energy sources are gaining attention in degrading organic pollutants in waste waters in an efficient and sustainable way. The present work is focused on a study of TiO2 nanotubes as photocatalysts for photoelectrocatalytic (PEC) degradation of acetaminophen (AMP) at different pH (3, 7, and 9). In particular, different TiO2 photocatalysts were synthetized by stirring the electrode at different Reynolds numbers (Res) during electrochemical anodization. The morphology of the photocatalysts and their crystalline structure were evaluated by field emission scanning electron microscopy (FESEM) and Raman confocal laser microscopy (RCLM). These analyses revealed that anatase TiO2 nanotubes were obtained after anodization. In addition, photocurrent densities versus potential curves were performed in order to characterize the electrochemical properties of the photocatalysts. These results showed that increasing the Re during anodization led to an enhancement in the obtained photocurrents, since under hydrodynamic conditions part of the initiation layer formed over the tubes was removed. PEC degradation of acetaminophen was followed by ultraviolet-visible absorbance measurements and chemical oxygen demand tests. As drug mineralization was the most important issue, total organic carbon measurements were also carried out. The statistical significance analysis established that acetaminophen PEC degradation improved as hydrodynamic conditions linearly increased in the studied range (Re from 0 to 600). Additionally, acetaminophen conversion had a quadratic behavior with respect to the reaction pH, where the maximum conversion value was reached at pH 3. However, in this case, the diversity of the byproducts increased due to a different PEC degradation mechanism., This research was funded by The Ministerio de Economia y Competitividad and cofinanced by the European Social Fund (CTQ2016-79203-R and UPOV08-3E-012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Customized WO3 nanoplatelets as visible-light photoelectrocatalyst for the degradation of a recalcitrant model organic compound (methyl orange)

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Lucas-Granados, Bianca
  • García-Zamora, Carlos Samuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] WO3 nanoplatelets have been synthesized by electrochemical anodization in acidic electrolytes containing two different complexing agents: fluorides and hydrogen peroxide. The influence of the morphology and size of these nanoplatelets on their photoelectrocatalytic performance has been studied following the degradation of a model organic recalcitrant compound, such as methyl orange (MO). The effect of several supporting electrolytes on this photodegradation process has also been checked. The best MO decoloration was observed for nanoplatelets fabricated in the presence of low H2O2 concentrations, whose distribution and small size made them expose a very high surface area to the problem solution. With this nanostructure, decoloration efficiencies of ca. 100% were obtained after just 60 min. This result is considerably better than others reported in similar works, indicating the excellent behavior of these WO3 nanoplatelets as photoelectrocatalysts. (C) 2017 Elsevier B.V. All rights reserved., Authors thank for the financial support to the Ministerio de Economia y Competitividad (Project Code: CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012), and for the co-finance by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Iron oxide nanostructures for photoelectrochemical applications: Effect of applied potential during Fe anodization

  • Lucas-Granados, Bianca
  • Sánchez Tovar, Rita
  • Fernández Domene, Ramón Manuel
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In photoelectrochemistry, a suitable photoanode leading to high efficiencies in photocatalytic processes is a research challenge. Iron oxide nanostructures are promising materials to be used as photoanodes. In this work, different potentials during iron anodization were applied to study the properties of the synthesized nanostructures. Results revealed that nanostructures anodized at 50V presented well-defined nanotubular structures with open-tube tops, and they achieved values of photocurrent density of 0.11 mA cm(-2) at 0 rpm and 0.14 mA cm(-2) at 1000 rpm (measured at 0.50 V-Ag/Agcl), corresponding to the oxygen evolution reaction from water, i.e. 2H(2)O+4h(+)-> 4H(+)+O-2, demonstrating their good photoelectrochemical behavior., The authors would like to express their gratitude for the financial support granted to Bianca Lucas Granados by the Ministerio de Economia y Competitividad (Reference: BES-2014-068713 and Project CTQ2016-79203-R), for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and for the co-finance by the European Social Fund, and to the UPV for the concession of a post-doctoral grant (PAID-10-17) to Ramon M. Fernandez Domene.