Pasar al contenido principal

ROBOTS MANIPULADORES MOVILES COMO CO-OPERARIOS: AUTONOMIA E INTERACCION EN LA COLABORACION HUMANO-ROBOT

DPI2014-57757-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis Cinemático de Robots Manipuladores Redundantes: Aplicación a los Robots Kuka LWR 4+ y ABB Yumi, Kinematic analysis of redundant robotic manipulators: application to Kuka LWR 4+ and ABB Yumi

  • Zaplana, Isiah
  • Claret, Josep Arnau
  • Basanez, Luis
[ES] En este trabajo se presenta un análisis cinemático aplicado a dos manipuladores serie redundantes: el Kuka LWR 4+ y el ABB Yumi. En particular se deriva la cinemática directa para ambos manipuladores y se resuelve el problema de la cinemática inversa. Para el Kuka LWR 4+ dicha solución se obtiene en forma analítica, mientras que para el ABB Yumi se sigue un enfoque analítico y numérico. Además, se calculan simbólicamente tanto las singularidades del Kuka LWR 4+ como las direcciones singulares asociadas a estas. Este estudio contribuye al conocimiento cinemático de dos manipuladores redundantes de gran actualidad e interés para la comunidad robótica, y proporciona información útil para el diseño de diferentes algoritmos y leyes de control., [EN] This paper presents a kinematic analysis of two redundant serial manipulators: Kuka LWR 4+ and ABB Yumi. This analysis includes the derivation of the forward kinematics for both manipulators as well as the solution of the inverse kinematic problem. For the Kuka LWR 4+ this solution is analytical whereas for the ABB Yumi an analytical and numerical approach is proposed. Besides, the singularities of the Kuka LWR 4+ are obtained symbolically and the singular directions associated are calculated. This study intends to increase the kinematic knowledge of two actual redundant manipulators as well as to provide valuable information that can be used in the definition of different algorithms or control laws., Este trabajo ha sido realizado en parte gracias al apoyo de los proyectos DPI2013-40882-P, DPI2014-57757-R y las becas pre-doctorales BES-2012-059884 y BES-2012-054899.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Motion planning by demonstration with human-likeness evaluation for dual-arm robots

  • García, Néstor
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a planning procedure that allows an anthropomorphic dual-arm robotic system to perform a manipulation task in a natural human-like way by using demonstrated human movements. The key idea of the proposal is to convert the demonstrated trajectories into attractive potential fields defined over the configuration space and then use an RRT*-based planning algorithm that minimizes a path-cost function designed to bias the tree growth towards the human-demonstrated configurations. The paper presents a description of the proposed approach as well as results from a conceptual and a real application example, the latter using a real anthropomorphic dual-arm robotic system. A path-quality measure, based on first-order synergies (correlations between joint velocities) obtained from real human movements, is also proposed and used for evaluation and comparison purposes. The obtained results show that the paths obtained with the proposed procedure are more human-like., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

k-PMP: enhancing physics-based motion planners with knowledge-based reasoning

  • Ud Din, Muhayy
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Akbari, Aliakbar|||0000-0002-5290-9799
Physics-based motion planning is a challenging task, since it requires the computation of the robot motions while allowing possible interactions with (some of) the obstacles in the environment. Kinodynamic motion planners equipped with a dynamic engine acting as state propagator are usually used for that purpose. The difficulties arise in the setting of the adequate forces for the interactions and because these interactions may change the pose of the manipulatable obstacles, thus either facilitating or preventing the finding of a solution path. The use of knowledge can alleviate the stated difficulties. This paper proposes the use of an enhanced state propagator composed of a dynamic engine and a low-level geometric reasoning process that is used to determine how to interact with the objects, i.e. from where and with which forces. The proposal, called ¿-PMP can be used with any kinodynamic planner, thus giving rise to e.g. ¿-RRT. The approach also includes a preprocessing step that infers from a semantic abstract knowledge described in terms of an ontology the manipulation knowledge required by the reasoning process. The proposed approach has been validated with several examples involving an holonomic mobile robot, a robot with differential constraints and a serial manipulator, and benchmarked using several state-of-the art kinodynamic planners. The results showed a significant difference in the power consumption with respect to simple physics-based planning, an improvement in the success rate and in the quality of the solution paths., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Análisis cinemático de robots manipuladores redundantes: Aplicación a los robots Kuka LWR 4+ y ABB Yumi

  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Claret, Josep A.
  • Basañez Villaluenga, Luis|||0000-0002-5599-1636
En este trabajo se presenta un análisis cinemático aplicado a dos manipuladores serie redundantes: el Kuka LWR 4+ y el ABB Yumi. En particular, se deriva la cinemática directa para ambos manipuladores y se resuelve el problema de la cinemática inversa. Para el Kuka LWR 4+ dicha solución se obtiene en forma analítica, mientras que para el ABB Yumi se sigue un enfoque analítico y numérico. Además, se calculan simbólicamente tanto las singularidades del Kuka LWR 4+ como las direcciones singulares asociadas a éstas. Este estudio contribuye al conocimiento cinemático de dos manipuladores redundantes de gran actualidad e interés para la comunidad robótica, y proporciona información útil para el diseño de diferentes algoritmos y leyes de control.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

k-PMP: enhancing physics-based motion planners with knowledge-based reasoning

  • Ud Din, Muhayy
  • Rosell Gratacòs, Jan
  • Akbari, Aliakbar
Physics-based motion planning is a challenging task, since it requires the computation of the robot motions while allowing possible interactions with (some of) the obstacles in the environment. Kinodynamic motion planners equipped with a dynamic engine acting as state propagator are usually used for that purpose. The difficulties arise in the setting of the adequate forces for the interactions and because these interactions may change the pose of the manipulatable obstacles, thus either facilitating or preventing the finding of a solution path. The use of knowledge can alleviate the stated difficulties. This paper proposes the use of an enhanced state propagator composed of a dynamic engine and a low-level geometric reasoning process that is used to determine how to interact with the objects, i.e. from where and with which forces. The proposal, called ¿-PMP can be used with any kinodynamic planner, thus giving rise to e.g. ¿-RRT. The approach also includes a preprocessing step that infers from a semantic abstract knowledge described in terms of an ontology the manipulation knowledge required by the reasoning process. The proposed approach has been validated with several examples involving an holonomic mobile robot, a robot with differential constraints and a serial manipulator, and benchmarked using several state-of-the art kinodynamic planners. The results showed a significant difference in the power consumption with respect to simple physics-based planning, an improvement in the success rate and in the quality of the solution paths., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Análisis cinemático de robots manipuladores redundantes: Aplicación a los robots Kuka LWR 4+ y ABB Yumi

  • Zaplana Agut, Isiah
  • Claret, Josep A.
  • Basañez Villaluenga, Luis
En este trabajo se presenta un análisis cinemático aplicado a dos manipuladores serie redundantes: el Kuka LWR 4+ y el ABB Yumi. En particular, se deriva la cinemática directa para ambos manipuladores y se resuelve el problema de la cinemática inversa. Para el Kuka LWR 4+ dicha solución se obtiene en forma analítica, mientras que para el ABB Yumi se sigue un enfoque analítico y numérico. Además, se calculan simbólicamente tanto las singularidades del Kuka LWR 4+ como las direcciones singulares asociadas a éstas. Este estudio contribuye al conocimiento cinemático de dos manipuladores redundantes de gran actualidad e interés para la comunidad robótica, y proporciona información útil para el diseño de diferentes algoritmos y leyes de control., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Motion planning by demonstration with human-likeness evaluation for dual-arm robots

  • García, Néstor
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper presents a planning procedure that allows an anthropomorphic dual-arm robotic system to perform a manipulation task in a natural human-like way by using demonstrated human movements. The key idea of the proposal is to convert the demonstrated trajectories into attractive potential fields defined over the configuration space and then use an RRT*-based planning algorithm that minimizes a path-cost function designed to bias the tree growth towards the human-demonstrated configurations. The paper presents a description of the proposed approach as well as results from a conceptual and a real application example, the latter using a real anthropomorphic dual-arm robotic system. A path-quality measure, based on first-order synergies (correlations between joint velocities) obtained from real human movements, is also proposed and used for evaluation and comparison purposes. The obtained results show that the paths obtained with the proposed procedure are more human-like., Peer Reviewed, Postprint (author's final draft)