Pasar al contenido principal

ROBOTS AUTONOMOS DIESTROS COMO CO-TRABAJADORES CON OPERADORES HUMANOS

DPI2016-80077-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manipulador móvil, bibrazo y diestro con nuevas ruedas omnidireccionales, Dual-arm dexterous mobile manipulator with new omnidirectional wheels

  • Suárez, R.
  • Palomo-Avellaneda, L.
  • Martínez, J.
  • Clos, D.
  • García, N.
[ES] Este artículo describe un manipulador móvil, bimanual y con capacidad de manipulación diestra denominado MADAR (de Mobile Anthropomorphic Dual-Arm Robot). Básicamente puede dividirse en dos partes, una base móvil y una estructura superior portando dos brazos en configuración antropomorfa con manos mecánicas diestras equipadas con sensores táctiles. La base, completamente de desarrollo propio, es de forma circular y tiene tres ruedas con un diseño novedoso que permiten una movilidad omnidireccional. La estructura superior integra elementos comerciales, como los brazos, las manos y distintos sensores, que han sido adaptados para su funcionamiento conjunto. El artículo incluye tanto la descripción de los principales elementos del hardware como del software desarrollado para su control y uso., [EN] This article describes a mobile manipulator, equipped with two arms with dexterous capabilities, called MADAR (from Mobile Anthropomorphic Dual-Arm Robot). Basically, the manipulator can be divided into two parts, a mobile base and an upper structure that includes two arms with dexterous hands equipped with tactile sensors. The base, completely self-developed, is circular in shape and has three wheels with a novel design that allow omnidirectional mobility. The upper structure integrates commercial elements, such as the arms, the hands and dierent sensors. The article includes the description of the main elements of the hardware and the software developed for its control and use., Este trabajo ha sido parcialmente financiado por el gobierno español mediante el proyecto DPI2016-80077-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review and comparison of ontology-based approaches to robot autonomy

  • Olivares-Alarcos, Alberto
  • Beßler, Daniel
  • Khamis, Alaa
  • Goncalves, Paulo
  • Habib, Maki K.
  • Bermejo-Alonso, Julita
  • Barreto, Marcos
  • Diab, Mohammed
  • Rosell, Jan
  • Quintas, Joao
  • Olszewska, Joanna
  • Nakawala, Hirenkumar
  • Pignaton, Edison
  • Gyrard, Amelie
  • Borgo, Stefano
  • Alenyà, Guillem
  • Beetz, Michael
  • Li, Howard
Within the next decades, robots will need to be able to execute a large variety of tasks autonomously in a large variety of environments. To relax the resulting programming effort, a knowledge-enabled approach to robot programming can be adopted to organize information in re-usable knowledge pieces. However, for the ease of reuse, there needs to be an agreement on the meaning of terms. A common approach is to represent these terms using ontology languages that conceptualize the respective domain. In this work, we will review projects that use ontologies to support robot autonomy. We will systematically search for projects that fulfill a set of inclusion criteria and compare them with each other with respect to the scope of their ontology, what types of cognitive capabilities are supported by the use of ontologies, and which is their application domain., This work was partially funded by the following agencies: Deutsche Forschungsgemeinschaft (DFG) through the Collaborative Research Center EASE (1320); Regional Catalan Agency ACCIO through the RIS3CAT 2016 project SIMBIOTS (COMRDI16-1-0017); Spanish State ´ Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656); Spanish Government through the project DPI2016-80077-R and grant 2017; FCT, through IDMEC, under LAETA, project UID/EMS/50022/2019; Project 0043- EUROAGE-4-E (POCTEP Programa Interreg V-A Spain-Portugal). J. Olszewska was partially supported by Innovate UK.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mobile Manipulation Hackathon: Moving into Real World Applications

  • Roa, Máximo A.
  • Dogar, Mehmet
  • Pagès, Jordi
  • Vivas, Carlos
  • Morales, Antonio
  • Correll, Nikolaus
  • Gorner, Michael
  • Rosell, Jan
  • Foix, Sergi
  • Memmesheimer, Raphael
  • Ferro, Francesco
The Mobile Manipulation Hackathon was held in late 2018 during the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) to showcase the latest applications of wheeled robotic manipulators. The challenge had an open format, where teams developed an application using simulation tools and integrated it into a robotic platform. This article presents the competition and analyzes the results, with information gathered during the event and from a survey circulated among the finalist teams. We provide an overview of the mobile manipulation field, identify key areas required for further development to facilitate the implementation of mobile manipulators in real applications, and discuss ideas about how to structure future hackathon-style competitions to enhance their impact on the scientific and industrial communities., M. Dogar received funding from the UK Engineering and Physical Sciences Research Council under grant EP/P019560/1. A. Morales and the UJI Robotic Intelligence Laboratory are partially funded by Ministerio de Econom´ıa y Competitividad (DPI2017-89910-R) and by Generalitat Valenciana (PROMETEO/2020/034). The work developed by team IOC-AUDECO was partially supported by the Spanish Government through the project DPI2016-80077-R. Team IRI was supported by the European Research Council (ERC) from the European Union H2020 Programme under grant 741930 (CLOTHILDE: CLOTH manIpulation Learning from DEmonstrations), and the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Team TAMS was partially funded by the German Research Foundation (DFG) and the National Science Foundation of China in project Crossmodal Learning, TRR-169.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical model for a nineteenth-century hydrometric module

  • Vives i Costa, Jordi
  • Felipe Blanch, José Juan de
  • Peña Pitarch, Esteve
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29IR.1943-4774.0001415., The Cequia of Manresa is a 26-km open channel constructed in the fourteenth century that conveys water from the Llobregat River to the city of Manresa using an elevation difference of 10.4 m. The channel is still operational today, supplying water for domestic, industrial, and agricultural uses to an overall population of 150,000 people. A hydrometric module was constructed in 1864 to regulate the flow rate in the Cequia to under 1,000¿¿L/s. This module was dismantled in 1959 and is currently nonoperational. This work studied the operation of the module and determined whether it met the objectives for which it was built. The module was modeled numerically. Owing to the lack of experimental measures from the module, the model was validated with an analytical model from the literature, which demonstrated its accuracy. The model was created by applying computational fluid dynamics (CFD) using FLOW-3D software. The results showed that the numerical model reproduced the dynamic behavior of the hydrometric module (transitory), and that the old automated system operated correctly, limiting the flow to the required value. The numerical models can be used as a tool for historical research., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robots autónomos diestros como co-trabajadores con operarios humanos

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Randomized physics-based motion planning for grasping in cluttered and uncertain environments

  • Muhayy, Uddin
  • Moll, Mark
  • Kavraki, Lydia
  • Rosell Gratacòs, Jan
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Planning motions to grasp an object in cluttered and uncertain environments is a challenging task, particularly when a collision-free trajectory does not exist and objects obstructing the way are required to be carefully grasped and moved out. This letter takes a different approach and proposes to address this problem by using a randomized physics-based motion planner that permits robot–object and object–object interactions. The main idea is to avoid an explicit high-level reasoning of the task by providing the motion planner with a physics engine to evaluate possible complex multibody dynamical interactions. The approach is able to solve the problem in complex scenarios, also considering uncertainty in the objects’ pose and in the contact dynamics. The work enhances the state validity checker, the control sampler, and the tree exploration strategy of a kinodynamic motion planner called KPIECE. The enhanced algorithm, called p-KPIECE, has been validated in simulation and with real experiments. The results have been compared with an ontological physics-based motion planner and with task and motion planning approaches, resulting in a significant improvement in terms of planning time, success rate, and quality of the solution path., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Manipulación de objetos desconocidos analizando localmente su forma para optimizar las fuerzas de prensión

  • Montaño Sarria, Andrés Felipe
  • Suárez Feijóo, Raúl
Los enfoques propuestos para la manipulación de objetos se basan, generalmente, en el conocimiento de las características del objeto manipulado. En este trabajo se presenta un enfoque geométrico que permite manipular un objeto desconocido basándose únicamente en información cinemática y táctil. Los datos de los sensores táctiles y los valores articulares del robot, que se obtienen durante la manipulación, se usan para reconocer la forma del objeto (al menos la curvatura local de la superficie en contacto durante la manipulación), buscando optimizar las fuerzas de contacto. El enfoque propuesto ha sido implementado y probado usando la mano robótica Schunk Dexterous Hand (SDH2). Los resultados experimentales presentados muestran la validez del enfoque, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mobile manipulation hackathon: moving into real world applications

  • Roa Garzón, Máximo Alejandro
  • Rosell Gratacòs, Jan
  • Foix Salmerón, Sergi
  • Pagès, Jordi
  • Dogar, Mehmet R.
  • Vivas, Carlos
  • Morales Escrig, Antonio
  • Correll, Nikolaus
  • Gorner, Michael
  • Memmesheier, Raphael
  • Ferro, Francesco
The Mobile Manipulation Hackathon was held in late 2018 during the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) to showcase the latest applications of wheeled robotic manipulators. The challenge had an open format, where teams developed an application using simulation tools and integrated it into a robotic platform. This article presents the competition and analyzes the results, with information gathered during the event and from a survey circulated among the finalist teams. We provide an overview of the mobile manipulation field, identify key areas required for further development to facilitate the implementation of mobile manipulators in real applications, and discuss ideas about how to structure future hackathon-style competitions to enhance their impact on the scientific and industrial communities., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Neural cellular automata manifold

  • Hernández Ruiz, Alejandro José
  • Vilalta Arias, Armand
  • Moreno-Noguer, Francesc
Very recently, the Neural Cellular Automata (NCA) has been proposed to simulate the morphogenesis process with deep networks. NCA learns to grow an image starting from a fixed single pixel. In this work, we show that the neural network (NN) architecture of the NCA can be encapsulated in a larger NN. This allows us to propose a new model that encodes a manifold of NCA, each of them capable of generating a distinct image. Therefore, we are effectively learning an embedding space of CA, which shows generalization capabilities. We accomplish this by introducing dynamic convolutions inside an Auto-Encoder architecture, for the first time used to join two different sources of information, the encoding and cell's environment information. In biological terms, our approach would play the role of the transcription factors, modulating the mapping of genes into specific proteins that drive cellular differentiation, which occurs right before the morphogenesis. We thoroughly evaluate our approach in a dataset of synthetic emojis and also in real images of CIFAR-10. Our model introduces a general-purpose network, which can be used in a broad range of problems beyond image generation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Introductory analysis of human upper body after stroke

  • Peña Pitarch, Esteve
  • Vives i Costa, Jordi
  • López Martínez, Joan Antoni
  • Al Omar Mesnaoui, Anas
  • Alcelay Larrión, José Ignacio
  • Ticó Falguera, Neus
The most reliable prognostic factors associated with Upper Extremity (UE) recovery are localized motor impairments, especially in the musculature of the hand and abduction of the shoulder in the first days after a stroke. Evaluation of the biomechanics of the hand allows an accurate identification of the motion arcs of the digital joints. Objective: Assess the prognostic value of the range of motion of the finger joints using an instrumental glove (CyberGlove II®) one week after stroke for UE functional recovery at 6 months. Methodology: A prospective, longitudinal, observational study with follow-ups at 3-4 days, 1 week, 3 and 6months of patients with UE motor impairment. Variables collected included: demographic data, level of stroke severity (NIHSS), deep sensitivity, sphincter incontinence, Fugl Meyer Assessment of UE (FM-UE), muscle balance with the Medical Research Council (MRC), muscle tone (Modified Ashworth Scale) and pre- and post-stroke functional ability (Barthel Index and Modified Rankin Scale). Active range of motion of the metacarpophalangeal and interphalangeal joints of the index, middle finger, annulary, and little finger was assessed with CyberGlove II® without and against gravity. The dependent variable UE function was evaluated with the Action Research Arm Test (ARAT) categorized as good function (ARAT=10) and poor function (ARAT<10). Results: 31 patients were included, 18 of which completed the 6-month follow-up. Mean age was 68.2 years (SD = 9.1) and 72.2 % were men. A total of 77.8 % of strokes were ischemic, and 50 % of these were lacunar. Mean NIHSS score was 9.2 (SD = 5.5). Motor NIHSS of UE, FM-UE and MRC of the flexion-extension musculature of the digits and wrist were prognostic factors for the recovery of UE function., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

SkillMaN — A skill-based robotic manipulation framework based on perception and reasoning

  • Diab, Mohammed
  • Pomarlan, Mihai
  • Beßler, Daniel
  • Rosell Gratacòs, Jan
  • Akbari, Aliakbar
  • Bateman, John
  • Beetz, Michael
One of the problems that service robotics deals with is to bring mobile manipulators to work in semi-structured human scenarios, which requires an efficient and flexible way to execute every-day tasks, like serve a cup in a cluttered environment. Usually, for those tasks, the combination of symbolic and geometric levels of planning is necessary, as well as the integration of perception models with knowledge to guide both planning levels, resulting in a sequence of actions or skills which, according to the current knowledge of the world, may be executed. This paper proposes a planning and execution framework, called SkillMaN, for robotic manipulation tasks, which is equipped with a module with experiential knowledge (learned from its experience or given by the user) on how to execute a set of skills, like pick-up, put-down or open a drawer, using workflows as well as robot trajectories. The framework also contains an execution assistant with geometric tools and reasoning capabilities to manage how to actually execute the sequence of motions to perform a manipulation task (which are forwarded to the executor module), as well as the capacity to store the relevant information to the experiential knowledge for further usage, and the capacity to interpret the actual perceived situation (in case the preconditions of an action do not hold) and to feed back the updated state to the planner to resume from there, allowing the robot to adapt to non-expected situations. To evaluate the viability of the proposed framework, an experiment has been proposed involving different skills performed with various types of objects in different scene contexts, Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Knowledge-Oriented Physics-Based Motion Planning for Grasping Under Uncertainty

  • Ud Din, Muhayy
  • Akbari, Aliakbar
  • Rosell Gratacòs, Jan
Grasping an object in unstructured and uncertain environments is a challenging task, particularly when a collision-free trajectory does not exits. High-level knowledge and reasoning processes, as well as the allowing of interaction between objects, can enhance the planning efficiency in such environments. In this direction, this study proposes a knowledge-oriented physics-based motion planning approach for a hand-arm system that uses a high-level knowledge-based reasoning to partition the workspace into regions to both guide the planner and reason about the result of the dynamical interactions between rigid bodies. The proposed planner is a kinodynamic RRT that uses a region-biased state sampling strategy and a smart validity checker that takes into account uncertainty in the pose of the objects. Complex dynamical interactions along with possible physics-based constraints such as friction and gravity are handled by a physics engine that is used as the RRT state propagator. The proposal is validated for different scenarios in simulation and in a real environment using a 7-degree-of-freedom KUKA Lightweight robot equipped with a two-finger gripper. The results show a significant improvement in the success rate of the execution of the computed plan in the presence of object pose uncertainty., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Aspectos técnicos de los robots co-trabajadores con operadores humanos

  • Suárez Feijóo, Raúl
  • Rosell Gratacòs, Jan
La robótica colaborativa, en la que los robots comparten el espacio de trabajo con los humanos e interactúan con ellos, toma un papel cada vez más relevante. En este contexto, el artículo presenta desarrollos realizados en diferentes aspectos técnicos necesarios para que estos robots funcionen adecuadamente y cumplan las expectativas en cuanto a su integración. En particular, se enfatizan las capacidades de planificación autónoma de tareas y movimientos, de manipulación diestra, de manipulación bimanual y de interacción con los humanos. Todos los desarrollos presentados han sido validados experimentalmente, y en el artículo se incluyen ejemplos ilustrativos de los experimentos realizados., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Learning Action-oriented grasping for manipulation

  • Ud Din, Muhayy
  • Sarwar, M Usman
  • Zahoor, Imran
  • Qazi, Wajahat Mahmood
  • Rosell Gratacòs, Jan
Complex manipulation tasks require grasping strategies that simultaneously satisfy the stability and the semantic constraints that have to be satisfied for an action to be feasible, referred as action-oriented semantic grasp strategies. This study develops a framework using machine learning techniques to compute action-oriented semantic grasps. It takes a 3D model of the object and the action to be performed as input and provides a vector of action-oriented semantic grasps. We evaluate the performance of machine learning (particu- larly classification techniques) to determine which approaches perform better for this problem. Using the best approaches, a multi-model classification technique is developed. The proposed approach is evaluated in simulation to grasp different kitchenobjects using a parallel gripper. The results show that multi-model classification approach enhances the prediction accuracy. The implemented system can be used as to automate the data labeling process required for deep learning approaches., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Model-free in-hand manipulation based on commanded virtual contact points

  • Montaño Sarria, Andrés Felipe
  • Suárez Feijóo, Raúl
This paper presents a simple strategy to allow therotation of unknown objects using a robotic hand equipped withtactile sensors. The tactile and kinematic information, obtainedwhile that the object is manipulated, is used to determinethe hand configurations that change the object position. Theapproach was successfully tested using an anthropomorphicrobotic hand (Allegro Hand), with the fingertips modified toinclude tactile sensors (WTS-FT). Using three fingers of the hand,every-day objects were successfully rotated without using theirmodel for the determination of the hand movement, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Task-dependent synergies for motion planning of an anthropomorphic dual-arm system

  • García Hidalgo, Néstor
  • Suárez Feijóo, Raúl
  • Rosell Gratacòs, Jan
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The paper deals with the problem of motion planning for anthropomorphic dual-arm robots. It introduces a measure of the similarity of the movements needed to solve two given tasks. Planning using this measure to select proper arm synergies for a given task improves the planning performance and the resulting plan., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Physics-based Motion Planning with Temporal Logic Specifications

  • Ud Din, Muhayy
  • Akbari, Aliakbar
  • Rosell Gratacòs, Jan
The final version of this work is available at https://doi.org/10.1016/j.ifacol.2017.08.1578 Copyright of all papers belongs to IFAC and must be referenced if derivative journal papers are produced from the conference papers., One of the main foci of robotics is nowadays centered in providing a great degree of autonomy to robots. A fundamental step in this direction is to give them the ability to plan in discrete and continuous spaces to find the required motions to complete a complex task. In this line, some recent approaches describe tasks with Linear Temporal Logic (LTL) and reason on discrete actions to guide sampling-based motion planning, with the aim of finding dynamically-feasible motions that satisfy the temporal-logic task specifications. The present paper proposes an LTL planning approach enhanced with the use of ontologies to describe and reason about the task, on the one hand, and that includes physics-based motion planning to allow the purposeful manipulation of objects, on the other hand. The proposal has been implemented and is illustrated with didactic examples with a mobile robot in simple scenarios where some of the goals are occupied with objects that must be removed in order to fulfill the task., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Contingent task and motion planning under uncertainty for human–robot interactions

  • Akbari, Aliakbar
  • Rosell Gratacòs, Jan
  • Diab, Mohammed
Manipulation planning under incomplete information is a highly challenging task for mobile manipulators. Uncertainty can be resolved by robot perception modules or using human knowledge in the execution process. Human operators can also collaborate with robots for the execution of some difficult actions or as helpers in sharing the task knowledge. In this scope, a contingent-based task and motion planning is proposed taking into account robot uncertainty and human–robot interactions, resulting a tree-shaped set of geometrically feasible plans. Different sorts of geometric reasoning processes are embedded inside the planner to cope with task constraints like detecting occluding objects when a robot needs to grasp an object. The proposal has been evaluated with different challenging scenarios in simulation and a real environment., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simulation of virtual human hand evolution after stroke

  • Peña Pitarch, Esteve
  • Ticó Falguera, Neus
Different types of neurological deficits and sequels in the upper extremities that affect the activities of daily living (ADL) in patients who have undergone stroke have been analyzed from a subjective clinical point of view. The aim of this work is to show a novel environment to simulate the initial improvement of the upper limb functions a few days after stroke and simulate the functional recovery of patients under a rehabilitation program. Eighteen patients in the first seven days of stroke were selected. Five men and thirteen women participated in the experiments. After six months, six of them recovered all the functionality of the hand tested with the ARAT test and wearing a Ciberglobe system, five recovered part of the hand functionality, and seven did not show apparent recovery of the functionality of the hand., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

k-PMP: enhancing physics-based motion planners with knowledge-based reasoning

  • Ud Din, Muhayy
  • Rosell Gratacòs, Jan
  • Akbari, Aliakbar
Physics-based motion planning is a challenging task, since it requires the computation of the robot motions while allowing possible interactions with (some of) the obstacles in the environment. Kinodynamic motion planners equipped with a dynamic engine acting as state propagator are usually used for that purpose. The difficulties arise in the setting of the adequate forces for the interactions and because these interactions may change the pose of the manipulatable obstacles, thus either facilitating or preventing the finding of a solution path. The use of knowledge can alleviate the stated difficulties. This paper proposes the use of an enhanced state propagator composed of a dynamic engine and a low-level geometric reasoning process that is used to determine how to interact with the objects, i.e. from where and with which forces. The proposal, called ¿-PMP can be used with any kinodynamic planner, thus giving rise to e.g. ¿-RRT. The approach also includes a preprocessing step that infers from a semantic abstract knowledge described in terms of an ontology the manipulation knowledge required by the reasoning process. The proposed approach has been validated with several examples involving an holonomic mobile robot, a robot with differential constraints and a serial manipulator, and benchmarked using several state-of-the art kinodynamic planners. The results showed a significant difference in the power consumption with respect to simple physics-based planning, an improvement in the success rate and in the quality of the solution paths., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hot working behaviour and processing maps of duplex cast steel

  • Alcelay Larrión, José Ignacio
  • Peña Pitarch, Esteve
  • Al Omar Mesnaoui, Anas
In this paper the hot working behaviour of medium carbon duplex cast steel is studied using uniaxial hot compression tests over a temperature range varying from 700 °C to 1 000 °C and at different strain rates ranging from 10–4 to 10–1 s–1. A model based on a variant of a dynamic materials model was employed to construct processing maps. These maps delineate the safe and unsafe domains. The safe domains, associated with dynamic recrystallization and dynamic recovery, can be chosen to optimize the hot workability of the studied material. Whereas, the unsafe domain is to be avoided because it is associated with plastic deformation instabilities. The domain associated with dynamic recrystallization is centred at 1000 °C and 10–4 s–1 with a peak energy dissipation efficiency of about 40%, while the domain associated with dynamic recovery is centred at 700 °C and 10–4 s–1 with a peak energy dissipation efficiency of about 27%. The unsafe hot working domain, spread over the entire temperature range and moderate to high strain rates, predicts the appearance of flow instabilities, in the form of shear bands and intergranular cracks. To validate the obtained results, microstructural observations corresponding to different processing conditions are presented., The authors are grateful for the financial support received from the CICYT (Spain) through the research project DPI2016-80077-R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Virtual human hand: wrist movements

  • Peña Pitarch, Esteve
  • Puig de la Bellacasa, Inmaculada
  • Padilla Magaña, Jesús Fernando
  • Al Omar Mesnaoui, Anas
  • Alcelay Larrión, José Ignacio
Hand model with 25 Degrees of Freedom (DOF) was developed and implemented considering forward and inverse kinematics. However, the model, after some experience and use need to add new DOF. The proposed model is with 29 DOF, these new DOF serve to simulate the arc of the palm in the part of the wrist. Once we locate a new coordinates system in the end of the radius close to scaphoid we apply Denavit-Hartenberg for all the joints. Forward and inverse kinematics will be applied. Ligaments to apply restrictions in wrist movement are included. This affect to the fingertip position. New model of virtual human hand with more accuracy in presented and validated with a Cyberglove™ and Leap Motion., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Datos de investigación Set de datos (Dataset)

Numerical Model for a 19th Century Hydrometric Module: models_cases_1-6

  • Vives i Costa, Jordi
Numerical Model for a 19th Century Hydrometric (Case 1: 1000 L/s inlet flow). Aquests datasets són els models numèrics que corresponen als 6 casos de simulacions fetes amb el software de CFD anomenat Flow3D., 1
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Diseño de una prótesis de mano adaptable al crecimiento

  • Ayats, Marta
  • Suárez Feijóo, Raúl
En este artículo se presenta el diseño de una prótesis de mano que se adapta al crecimiento del usuario, desde los 4 años hasta la edad adulta. Se ha considerado en el diseño el estudio de las necesidades de los pacientes y el estudio de las medidas antropométricas de los usuarios en la edad de crecimiento. El diseño incluye únicamente la estructura externa y los mecanismos de movimiento, así pues no se ha incluido en este trabajo el diseño del control ni de la electrónica, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Grasp quality measures for transferring objects

  • Soler, Fernando
  • Rojas-de-Silva, Abiud
  • Suárez Feijóo, Raúl
There is a lack of quality indexes to evaluate grasps that are more likely to allow a hand-to-hand transfer of an object during a ma- nipulation task. In order to overcome it, this paper presents a proposal of grasp transfer quality measures to evaluate how easy or feasible is that an object grasped by one hand could be grasped by another hand to per- form a hand-to-hand transfer. Experiments were conducted to evaluate the proposed grasp transfer quality measures using different objects and the model of a real robotic hand, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A lightweight perception module for planning purposes

  • Ud Din, Muhayy
  • Rosell Gratacòs, Jan
  • Bukhari, Sohail
  • Ahmad, Mansoor
  • Qazi, Wajahat Mahmood
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Sensing is an essential component for robots to perform the manipulation tasks in real environments. This study proposes a lightweight deep-learning-based sensing modules which allows the robots to automatically model the workspace for manipulation planning. This sensing module is developed as a part of our ongoing manipulation planning framework. It will be used to enhance the sensing accuracy and make it capable of planning the manipulation tasks in real environments. The retrained model is further trained over commonly used objects to enhance the prediction accuracy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Modeling human-likeness in approaching motions of dual-arm autonomous robots

  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
  • García Hidalgo, Néstor
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper addresses the problem of obtaining human-like motions with an anthropomorphic dual-arm torso assembled on a mobile platform. The focus is set on the coordinated movements of the robotic arms and the robot base while approaching a table to subsequently perform a bimanual manipulation task. For this, human movements are captured and mapped to the robot in order to compute the human dual-arm synergies. Since the demonstrated synergies change depending on the robot position, a recursive Cartesian-space discretization is presented based on these differences. Thereby, different movements of the arms are assigned to different regions of the Cartesian space. As an application example, a motion-planning algorithm exploiting this information is proposed and used., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Bilateral telemanipulation of unknown objects using remote dexterous in-hand manipulation strategies

  • Montaño Sarria, Andrés Felipe
  • Suárez Feijóo, Raúl
  • Aldana López, Carlos Iván
  • Nuño, Emmanuel
This paper presents an approach to perform bilateral in-hand (dexterous) telemanipulation of unknown objects. The proposed approach addresses three of the main problems in telemanipulation: \eno{kinematic issues due to the physical differences between the robotic and the human hands;} obtaining coherent haptic feedback to provide information about the manipulation at any time; and time-delays that can affect the stability of the overall closed-loop system. The novelty of the approach lays on the shared control scheme, where the robotic hand uses the tactile and \eno{the} kinematic information to manipulate an unknown object while the operator commands \eno{a} desired orientation of the object without caring about the relation between her/his commands and the actual hand movements. The viability of the proposed approach has been tested through transatlantic telemanipulation experiments between Mexico and Spain., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An Ontology Framework for Physics-Based Manipulation Planning

  • Diab, Mohammed
  • Ud Din, Muhayy
  • Akbari, Aliakbar
  • Rosell Gratacòs, Jan
In manipulation planning, dynamic interactions between the objects and the robots play a significant role. In this scope, dynamic engines allow to consider them within motion planners, giving rise to physics-based motion planners that consider the purposeful manipulation of objects. In this context, the representation of knowledge regarding how the objects have to be manipulated eases a semantic-based reasoning that reduces the computational cost of physics-based planners. In this work, an ontology framework is proposed to organize the knowledge needed for physics-based manipulation planning, allowing to derive manipulation regions and behaviors. A semantic map is constructed to categorize and assign the manipulation constraints based on the robot, the objects and the type of actions. The ontology framework can be queried using Description Language to obtain the necessary knowledge for the robot to manipulate the objects in its environment., Peer Reviewed, Postprint (author's final draft)