Pasar al contenido principal

CONTROL BASADO EN LA SALUD Y LA RESILIENCIA DE INFRAESTRUCTURAS CRITICAS Y SISTEMAS COMPLEJOS

DPI2014-58104-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 55
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Introducción a la Diagnosis de Fallos basada en Modelos mediante Aprendizaje basado en Proyectos

  • Costa Castelló, Ramón
  • Puig, Vicenç
  • Blesa, Joaquim
[ES] La diagnosis de fallos basada en modelos es hoy en día un campo maduro dentro de la ingeniería de control que empieza a formar parte de los planes de estudios de grado y postgrado. Sin embargo, la falta de buenos materiales pedagógicos dificulta el proceso de enseñanza / aprendizaje. En este trabajo se muestra cómo una metodología de aprendizaje basada en proyectos se ha utilizado en las sesiones de laboratorio del curso de Diagnosis y Control Tolerante a Fallos del Máster en Automática y Robótica de la UPC utilizando un sistema real de tres depótodos. Los métodos de detección de fallos basados en observadores y la utilización de residuos estructurados para el aislamiento de fallos son introducidos a los estudiantes desde un punto de vista práctico, por medio de un conjunto de ejercicios que se proponen para alcanzar un conjunto de objetivos de aprendizaje., Este trabajo ha sido parcialmente financiado por la ayudas del Ministerio de Educación de España a través de los proyectos CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) y CICYT HARCRICS (ref. DPI2014-58104-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust sensor placement for leak location: analysis and design

  • Blesa, Joaquim
  • Nejjari, Fatiha
  • Sarrate, Ramon
In this paper, a nominal sensor placement methodology for leak location in water distribution networks is presented. To reduce the size and the complexity of the optimization problem a clustering technique is combined with the nominal sensor placement methodology. Some of the pressure sensor placement methods for leak detection and location in water distribution networks are based on the pressure sensitivity matrix analysis. This matrix depends on the network demands, which are nondeterministic, and the leak magnitudes, that are unknown. The robustness of the nominal sensor placement methodology is investigated against the fault sensitivity matrix uncertainty. Providing upon the dependency of the leak location procedure on the network operating point, the nominal sensor placement problem is then reformulated as a multi-objective optimization for which Pareto optimal solutions are generated. The robustness study as well as the resulting robust sensor placement methodology are illustrated by means of a small academic network as well as a district metered area in the Barcelona water distribution network, This work has been funded by the Spanish Ministry of Economy and Competitiveness through the CICYT projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R), and by the European Commission through contract EFFINET (ref. FP7-ICT2011-8-318556)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic model predictive control based on Gaussian processes applied to drinking water networks

  • Wang, Ye
  • Ocampo-Martínez, Carlos
  • Puig, Vicenç
This paper focuses on developing a stochastic model predictive control (MPC) strategy based on Gaussian Processes (GPs) for propagating system disturbances in a receding horizon way. Using a probabilistic system representation, the state trajectories considering the influence of disturbances can be obtained through the uncertainty propagation by using GPs. This fact allows obtaining the confidence intervals for state evolutions over the MPC prediction horizon that are included into the MPC objective function and constraints. The feasibility of the proposed MPC strategy considering the incorporated results of disturbance forecasting is also discussed. Simulation results obtained from the application of the proposed approach to the Barcelona drinking water network (DWN) taking real demand data into account are presented. The comparison with the well-known certainty-equivalent MPC shows the effectiveness of the proposed stochastic MPC approach., This work was supported by Spanish Government (Ministerio de Economía y Competitividad) and FEDER under project DPI2014-58104-R (HARCRICS). Moreover, this paper was partially supported by the research project ECOCIS DPI-2013-48243-C2-1-R of the Spanish Ministry of Science and by AGAUR Doctorat Industrial 2013-DI-041., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A practical test for assessing the reachability of discrete-time Takagi-Sugeno fuzzy systems

  • Witczak, Marcin
  • Rotondo, Damiano
  • Puig, Vicenç
  • Witczak, Piotr
This paper provides a necessary and sufficient condition for the reachability of discrete-time Takagi–Sugeno fuzzy systems that is easy to apply, such that it constitutes a practical test. The proposed procedure is based on checking if all the principal minors associated to an appropriate matrix are positive. If this condition holds, then the rank of the reachability matrix associated to the Takagi–Sugeno fuzzy system is full for any possible sequence of premise variables, and thus the system is completely state reachable. On the other hand, if the principal minors are not positive, the property of the matrix being a block P one with respect to a particular partition of a set of integers is studied in order to conclude about the reachability of the Takagi–Sugeno system. Examples obtained using an inverted pendulum are used to show that it is easy to check this condition, such that the reachability analysis can be performed efficiently using the proposed approach., This work has been funded by the National Science Centre of Poland under Grant: UMO-2013/11/B/ST7/01110, by the Spanish Ministry of Science and Technology through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171), and by the DGR of Generalitat de Catalunya (ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An LMI approach to robust fault estimation for a class of nonlinear systems

  • Witczak, Marcin
  • Buciakowski, Mariusz
  • Puig, Vicenç
  • Rotondo, Damiano
  • Nejjari, Fatiha
The paper presents a robust fault estimation approach for a class of nonlinear discrete-time systems. In particular, two sources of uncertainty are present in the considered class of systems, that is, an unknown input and an exogenous external disturbance. Thus, apart from simultaneous state and fault estimation, the objective is to decouple the effect of an unknown input while minimizing the influence of the exogenous external disturbance within the framework. The resulting design procedure guarantees that a prescribed disturbance attenuation level is achieved with respect to the state and fault estimation error while assuring the convergence of the observer. The core advantage of the proposed approach is its simplicity by reducing the fault estimation problem to matrix inequalities formulation. In addition, the design conditions ensure the convergence of the observer with guaranteed performance. The effectiveness of the proposed approach is demonstrated by its application to a twin rotor multiple-input multiple-output system., The work was supported by the National Science Centre of Poland under grant no. 2013/11/B/ST7/01110. This work has also been partially funded by the Spanish Ministry of Science and Technology through the projects CICYT ECOCIS (ref. DPI2013- 48243-C2-1-R) and CICYT HARCRICS (ref. DPI2014-58104-R) by AGAUR through the contract FI-DGR 2014 (ref. 2014FI_B1_00172) and by the DGR of the Generalitat de Catalunya (ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator multiplicative fault estimation in discrete-time LPV systems using switched observers

  • Rotondo, Damiano
  • López-Estrada, Francisco-Ronay
  • Nejjari, Fatiha
  • Ponsart, Jean-Christophe
  • Theilliol, Didier
  • Puig, Vicenç
This paper proposes an observer for the joint state and fault estimation devoted to discrete-time linear parameter varying (LPV) systems subject to actuator faults. The major contribution of this work is that the observer is able to estimate multiplicative faults, contrarily to the existing approaches, that consider additive faults. The main characteristic of this observer is that it is scheduled not only by means of the endogenous varying parameters of the faulty model, but also by the input vector. Another contribution of this paper consists in adding a switching component in order to guarantee the feasibility of the conditions for designing the observer gains. It is proved that, as long as the input sequence satisfies some characteristics, the convergence of the observer error dynamics to zero is assured. A numerical example is used to demonstrate the effectiveness of the proposed strategy., This work has been funded by the Spanish Government (MINECO) through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171), by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374), and by the National Council of Science and Technology (CONACyT) of Mexico., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dilated LMI characterization for the robust finite time control of discrete-time uncertain linear systems

  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper provides new dilated linear matrix inequalities (LMIs) characterizations for the finite time boundedness (FTB) and the finite time stability (FTS) analysis of discrete-time uncertain linear systems. The dilated LMIs are later used to design a robust controller for the finite time control of discrete-time uncertain linear systems. The relevant feature of the proposed approach is the decoupling between the Lyapunov and the system matrices, that allows considering a parameter-dependent Lyapunov function. In this way, the conservativeness with respect to previous results is decreased. Numerical examples are used to illustrate the results., This work has been funded by the Spanish MINECO through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and CICYT HARCRICS (Ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI B1 00172) and FI-DGR 2015 (ref. 2015FI B2 00171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault tolerant control of a proton exchange membrane fuel cell using Takagi–Sugeno virtual actuators

  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Puig, Vicenç
In this paper, a fault tolerant control (FTC) strategy for proton exchange membrane (PEM) fuel cells based on the use of virtual actuators and the Takagi–Sugeno (TS) approach is proposed. The overall solution relies on adding a virtual actuator in the control loop to hide the fault from the controller point of view, allowing it to see the same plant as before the fault, such that the stability and some desired performances are preserved. The proposed methodology is based on the use of a reference model, where the resulting nonlinear error model is brought to a Takagi–Sugeno form using a gridding approach. The TS model is suitable for designing a controller using linear matrix inequalities (LMI)-based techniques, such that the resulting closed-loop error system is stable with poles placed in some desired region of the complex plane. Simulation results are used to show the effectiveness of the proposed approach., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374). Damiano Rotondo also acknowledges support by the Research Council of Norway through the Centers of Excellence funding scheme, Project number 223254 – Centre for Autonomous Marine Operations and Systems (NTNU-AMOS)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gain-scheduling multivariable LPV control of an irrigation canal system

  • Bolea, Yolanda
  • Puig, Vicenç
The purpose of this paper is to present a multivariable linear parameter varying (LPV) controller with a gain scheduling Smith Predictor (SP) scheme applicable to open-flow canal systems. This LPV controller based on SP is designed taking into account the uncertainty in the estimation of delay and the variation of plant parameters according to the operating point. This new methodology can be applied to a class of delay systems that can be represented by a set of models that can be factorized into a rational multivariable model in series with left/right diagonal (multiple) delays, such as, the case of irrigation canals. A multiple pool canal system is used to test and validate the proposed control approach., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (Ref. DPI2013-48243-C2-1-R) and by MINECO and FEDER through the project CICYT HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using a mixed model-based/data-driven approach

  • Soldevila, Adrià
  • Tornil-Sin, Sebastian
  • Blesa, Joaquim
  • Duviella, Eric
  • Fernández Cantí, Rosa M.
  • Puig, Vicenç
This paper proposes a new method for leak localization in water distribution networks (WDNs). In a first stage, residuals are obtained by comparing pressure measurements with the estimations provided by a WDN model. In a second stage, a classifier is applied to the residuals with the aim of determining the leak location. The classifier is trained with data generated by simulation of the WDN under different leak scenarios and uncertainty conditions. The proposed method is tested both by using synthetic and experimental data with real WDNs of different sizes. The comparison with the current existing approaches shows a performance improvement., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by MINECO through the grant IJCI-2014-2081, by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374), by the AGAUR of Generalitat de Catalunya through the grant 2014PDJ00102 and by EFFINET grant FP7-ICT-2012-318556 of the European Commission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reliable fault-tolerant model predictive control of drinking water transport networks

  • Robles, Deneb
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Garza-Castañón, Luis E.
This paper proposes a reliable fault-tolerant model predictive control applied to drinking water transport networks. After a fault has occurred, the predictive controller should be redesigned to cope with the fault effect. Before starting to apply the fault-tolerant control strategy, it should be evaluated whether the predictive controller will be able to continue operating after the fault appearance. This is done by means of a structural analysis to determine loss of controllability after the fault complemented with feasibility analysis of the optimization problem related to the predictive controller design, so as to consider the fault effect in actuator constraints. Moreover, by evaluating the admissibility of the different actuator-fault configurations, critical actuators regarding fault tolerance can be identified considering structural, feasibility, performance and reliability analyses. On the other hand, the proposed approach allows a degradation analysis of the system to be performed. As a result of these analyses, the predictive controller design can be modified by adapting constraints such that the best achievable performance with some pre-established level of reliability will be achieved. The proposed approach is tested on the Barcelona drinking water transport network., This work has been partially funded by MINECO and FEDER through the Project ECOCIS (Ref. DPI2013-48243-C2-1-R) and Project HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault diagnosis of proton exchange membrane fuel cells using a Takagi-Sugeno interval observer approach

  • Rotondo, Damiano
  • Fernández Cantí, Rosa M.
  • Tornil-Sin, Sebastian
  • Blesa, Joaquim
  • Puig, Vicenç
In this paper, the problem of robust fault diagnosis of proton exchange membrane (PEM) fuel cells is addressed by introducing the Takagi-Sugeno (TS) interval observers that consider uncertainty in a bounded context, adapting TS observers to the so-called interval approach. Design conditions for the TS interval observer based on regional pole placement are also introduced to guarantee the fault detection and isolation (FDI) performance. The fault detection test is based on checking the consistency between the measurements and the output estimations provided by the TS observers. In presence of bounded uncertainty, this check relies on determining if all the measurements lie inside their corresponding estimated interval bounds. When a fault is detected, the measurements that are inconsistent with their corresponding estimations are annotated and a fault isolation procedure is triggered. By using the theoretical fault signature matrix (FSM), which summarizes the effects of the different faults on the available residuals, the fault is isolated by means of a logic reasoning that takes into account the bounded uncertainty, and if the number of candidate faults is more than one, a correlation analysis is used to obtain the most likely fault candidate. Finally, the proposed approach is tested using a PEM fuel cell case study proposed in the literature., This work has been funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FI-DGR 2015 (ref. 2015FI_B2 00171) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust unknown input observer for state and fault estimation in discrete-time Takagi-Sugeno systems

  • Rotondo, Damiano
  • Witczak, Marcin
  • Puig, Vicenç
  • Nejjari, Fatiha
  • Pazera, Marcin
In this paper, a robust unknown input observer (UIO) for the joint state and fault estimation in discrete-time Takagi-Sugeno (TS) systems is presented. The proposed robust UIO, by applying the framework, leads to a less restrictive design procedure with respect to recent results found in the literature. The resulting design procedure aims at achieving a prescribed attenuation level with respect to the exogenous disturbances, while obtaining at the same time the convergence of the observer with a desired bound on the decay rate. An extension to the case of unmeasurable premise variables is also provided. Since the design conditions reduce to a set of linear matrix inequalities that can be solved efficiently using the available software, an evident advantage of the proposed approach is its simplicity. The final part of the paper presents an academic example and a real application to a multi-tank system, which exhibit clearly the performance and effectiveness of the proposed strategy., This work has been funded by the National Science Centre in Poland under the grant 2013/11/B/ST7/01110, by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R), by AGAUR through the contracts FI-DGR 2014 (ref. 2014FI_B1 00172) and FIDGR 2015 (ref. 2015FI_B2 00171), and by the DGR of Generalitat de Catalunya (SAC group Ref. 2014/SGR/374)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-valued observer-based active fault-tolerant model predictive control

  • Xu, Feng
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Wang, Xueqian
This paper proposes an integrated actuator and sensor active fault-tolerant model predictive control scheme. In this scheme, fault detection is implemented by using a set-valued observer, fault isolation (FI) is performed by set manipulations, and fault-tolerant control is carried out through the design of a robust model predictive control law. In this paper, a set-valued observer is used to passively complete the fault detection task, while FI is actively performed by making use of the constraint-handling capability of robust model predictive control. The set-valued observer is chosen to implement fault detection and isolation (FDI) because of its simple mathematical structure that is not affected by the type of faults such as sensor, actuator, and system-structural faults. This means that only one set-valued observer is needed to monitor all considered actuator and sensor statuses (health and fault) and to carry out the fault detection and isolation task instead of using a bank of observers (each observer matching a health/fault status). Furthermore, in the proposed scheme, the advantage of robust model predictive control is that it can effectively deal with system constraints, disturbances, and noises and allow to implement an active FI strategy, which can improve FI sensitivity when compared with the passive FI methods. Finally, a case study based on the well-known two-tank system is used to illustrate the effectiveness of the proposed fault-tolerant model predictive control scheme., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014- 58104-R), the Natural Science Foundation of Guangdong (No.2015A030313881), the National Natural Science Foundation of China (No.61673239), and the Shenzhen Key Lab of Space Robotic Technology and Telescience., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Short-term demand forecast using a bank of neural network models trained using genetic algorithms for the optimal management of drinking water networks

  • Rodríguez-Rangel, Héctor
  • Puig, Vicenç
  • López Farías, Rodrigo
  • Flores, Juan J.
Efficient management of a drinking water network reduces the economic costs related to water production and transport (pumping). Model predictive control (MPC) is nowadays a quite well-accepted approach for the efficient management of the water networks because it allows formulating the control problem in terms of the optimization of the economic costs. Therefore, shortterm forecasts are a key issue in the performance of MPC applied to water distribution networks. However, the short-term horizon demand forecast in a horizon of 24 hours in an hourly based scale presents some challenges as the water consumption can change from one day to another, according to certain patterns of behavior (e.g., holidays and business days). This paper focuses on the problem of forecasting water demand for the next 24 hours. In this work, we propose to use a bank of models instead of a single model. Each model is designed for forecasting one particular hour. Hourly models use artificial neural networks. The architecture design and the training process are performed using genetic algorithms. The proposed approach is assessed using demand data from the Barcelona water network., The present work has been developed while Hector Rodriguez was on a postdoctoral position at Universidad Politécnica de Cataluña under postdoctoral grant 237429, supported by CONACYT. He thanks the CSIC-UPC (Institut de Robòtica i Informàtica Industrial) for all the resources and accommodations that made his visit at the university possible. This work has also been partially funded by the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensor-fault tolerance using robust MPC with set-based state estimation and active fault isolation

  • Xu, Feng
  • Olaru, Sorin
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Niculescu, Silviu-Iulian
In this paper, a sensor fault-tolerant control scheme using robust model predictive control (MPC) and set-theoretic fault detection and isolation (FDI) is proposed. The robust MPC controller is used to control the plant in the presence of process disturbances and measurement noises while implementing a mechanism to tolerate faults. In the proposed scheme, fault detection (FD) is passive based on interval observers, while fault isolation (FI) is active by means of MPC and set manipulations. The basic idea is that for a healthy or faulty mode, one can construct the corresponding output set. The size and location of the output set can be manipulated by adjusting the size and center of the set of plant inputs. Furthermore, the inputs can be adjusted on-line by changing the input-constraint set of the MPC controller. In this way, one can design an input set able to separate all output sets corresponding to all considered healthy and faulty modes from each other. Consequently, all the considered healthy and faulty modes can be isolated after detecting a mode changing while preserving feasibility of MPC controller. As a case study, an electric circuit is used to illustrate the effectiveness of the proposed scheme., This work was supported by the DGR of Generalitat de Catalunya (SAC group Ref. Ref. 2014/SRG/374), by MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R) China Scholarship Council, CNRS-Supélec, Automatic Control Department, Supélec, France, the Natural Science Foundation of Guangdong (No. 2015A030313881) and the Shenzhen Key Lab of Space Robotic Technology and Telescience., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust MPC for actuator-fault tolerance using set-based passive fault detection and active fault isolation

  • Xu, Feng
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Olaru, Sorin
  • Niculescu, Silviu-Iulian
In this paper, a fault-tolerant control (FTC) scheme is proposed for actuator faults, which is built upon tube-based model predictive control (MPC) as well as set-based fault detection and isolation (FDI). In the class of MPC techniques, tubebased MPC can effectively deal with system constraints and uncertainties with relatively low computational complexity compared with other robust MPC techniques such as min-max MPC. Set-based FDI, generally considering the worst case of uncertainties, can robustly detect and isolate actuator faults. In the proposed FTC scheme, fault detection (FD) is passive by using invariant sets, while fault isolation (FI) is active by means of MPC and tubes. The active FI method proposed in this paper is implemented by making use of the constraint-handling ability of MPC to manipulate the bounds of inputs. After the system has been detected to become faulty, the input-constraint set of the MPC controller is adjusted to actively excite the system for achieving FI guarantees on-line, where an active FI-oriented input set is designed off-line. In this way, the system can be excited in order to obtain more extra system-operating information for FI than passive FI approaches. Overall, the objective of this paper is to propose an actuator MPC scheme with as little as possible of FI conservatism and computational complexity by combining tube-based MPC and set theory within the framework of MPC, respectively. Finally, a case study is used to show the effectiveness of the proposed FTC scheme., This work was supported by the DGR of Generalitat de Catalunya (SAC group ref. 2014/SGR/0375), the Spanish projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R), the China Scholarship Council (CSC), the Automatic Control Department of Supélec and CNRS-Supélec, France., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generalized set-theoretic unknown input observer for LPV systems with application to state estimation and robust fault detection

  • Xu, Feng
  • Tan, Junbo
  • Wang, Xueqian
  • Puig, Vicenç
  • Liang, Bin
  • Yuan, Bo
  • Liu, Houde
This paper proposes to design an unknown input observer (UIO) for the linear-parameter-varying (LPV) system on the basis of the set theory, which is named as the set-theoretic UIO (SUIO). The advantage of the SUIO consists in that it combines active and passive approaches to obtain robustness in state estimation (SE) and fault detection (FD). The active approach is based on the use of UIO to decouple unknown inputs, while the passive approach is based on the set theory to bound uncertain factors that cannot be actively decoupled. As a result, the effect of both unknown inputs (process disturbances, modeling errors, etc.) and measurement noises can be appropriately handled in the residual signals compared with the standard UIO-based SE and FD approaches. The design of SUIO can overcome the limitations of the traditional UIO design conditions, which can significantly broaden the application of the UIO-based SE and FD theory. Moreover, this paper proposes a generalized framework that can provide more flexibility in the design of SUIO guaranteeing their stability by means of a group of matrix inequalities. Because the LPV system uses a collection of online obtainable scheduling variables to embed nonlinearities, the design of SUIO for the LPV system can be used to address the SE and FD problems of nonlinear systems. At the end of this paper, two case studies are used to illustrate the effectiveness of the proposed approach., This work was supported by the Natural Science Foundation of Guangdong (no. 2015A030313881), the National Natural Science Foundation of China (no. 61673239), the Shenzhen Key Lab of Space Robotic Technology and Telescience, the Spanish Government (MINECO) through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), and MINECO and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A distributed predictive control approach for periodic flow-based networks: application to drinking water systems

  • Grosso, J. M.
  • Ocampo-Martínez, Carlos
  • Puig, Vicenç
This paper proposes a distributed model predictive control approach designed to work in a cooperative manner for controlling flow-based networks showing periodic behaviours. Under this distributed approach, local controllers cooperate in order to enhance the performance of the whole flow network avoiding the use of a coordination layer. Alternatively, controllers use both the monolithic model of the network and the given global cost function to optimise the control inputs of the local controllers but taking into account the effect of their decisions over the remainder subsystems conforming the entire network. In this sense, a global (all-to-all) communication strategy is considered. Although the Pareto optimality cannot be reached due to the existence of non-sparse coupling constraints, the asymptotic convergence to a Nash equilibrium is guaranteed. The resultant strategy is tested and its effectiveness is shown when applied to a large-scale complex flow-based network: the Barcelona drinking water supply system., This work has been partially funded by the Spanish Ministry of Science and Technology through the projects DEOCS (Ref. DPI2016-76493-C3-3-R) and HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear economic model predictive control of water distribution networks

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper addresses a non-linear economic model predictive control (EMPC) strategy for water distribution networks (WDNs). A WDN could be considered as a non-linear system described by differential-algebraic equations (DAEs) when flow and hydraulic head equations are considered. As in other process industries, the main operational goal of WDNs is the minimisation of the economic costs associated to pumping and water treatment, while guaranteeing water supply with required flows and pressures at all the control/demand nodes in the network. Other operational goals related to safety and reliability are usually sought. From a control point of view, EMPC is a suitable control strategy for WDNs since the optimal operation of the network cannot be established a priori by fixing reference volumes in the tanks. Alternatively, the EMPC strategy should determine the optimal filling/emptying sequence of the tanks taking into account that electricity price varies between day and night and that the demand also follows a 24-hour repetitive pattern. On the other hand, as a result of the ON/OFF operation of parallel pumps in pumping stations, a two-layer control scheme has been used: a non-linear EMPC strategy with hourly control interval is chosen in the upper layer and a pump scheduling approach with one-minute sampling time in the lower layer. Finally, closed-loop simulation results of applying the proposed control strategy to the D-Town water network are shown., This work has been partially supported by the European Commission through the EFFINET project (ref. FP7-ICT-2012-318556), by the MEICOMP through the project CICYT ECOCIS (ref. DPI2013-48243-C2-1-R) and by MEICOMP and FEDER through the project CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using Bayesian classifiers

  • Soldevila, Adrià
  • Fernández Cantí, Rosa M.
  • Blesa, Joaquim
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
This paper presents a method for leak localization in water distribution networks (WDNs) based on Bayesian classifiers. Probability density functions for pressure residuals are calibrated off-line for all the possible leak scenarios by using a hydraulic simulator, and considering the leak size uncertainty, demand uncertainty and sensor noise. A Bayesian classifier is applied on-line to the computed residuals to determine the location of leaks in the WDN. A time horizon based reasoning combined with the Bayesian classifier is also proposed to improve the localization accuracy. Two case studies based on the Hanoi and the Nova Icària networks are used to illustrate the performance of the proposed approach. Simulation results are presented for the Hanoi case study, whereas results for a real leak scenario are shown for the Nova Icària case study., This work has been funded by the Ministerio de Economía, Industria y Competitividad (MEINCOP) of the Spanish Government and FEDER through the projects ECOCIS (ref. DPI2013-48243-C2-1-R) and HARCRICS (ref. DPI2014-58104-R) and through the grant IJCI-2014-20801, by the European Commission through contract EFFINET (ref. FP7-ICT2011-8-318556) and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI_B 00591)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault estimation of wind turbines using combined adaptive and parameter estimation schemes

  • Witczak, Marcin
  • Rotondo, Damiano
  • Puig, Vicenç
  • Puig, Vicenç
  • Nejjari, Fatiha
  • Pazera, Marcin
This paper addresses the problem of fault estimation in wind turbines using a joint fault and state estimation scheme. The scheme assumes a set of possible faults affecting the dynamics of the wind turbine. Then, a combined adaptive and parameter estimation scheme is developed taking into consideration that process disturbances and sensor noises are unknown but bounded in an ellipsoid. Two subcases are considered depending on the satisfaction of a certain rank condition. The proposed approach is applied to a wind turbine based on a benchmark system model. The benchmark represents relevant fault scenarios, including sensor, actuator, and process faults. The proposed approach focuses on the last group of faults. Finally, the obtained results show that a satisfactory fault estimation is achieved against a set of predefined fault scenarios., This work has been funded by the National Science Centre in Poland under grant 2013/11/B/ST7/01110, by the Spanish Ministry of Science and Technology through the project Health-Aware and Resilient Control of Critical Infrastructures and Complex Systems of the Comisión Interministerial de Ciencia y Tecnología (Reference: DPI2014-58104-R), by L′Agència de Gestió d′Ajuts Universitaris i de Recerca through contract FI-DGR 2015 (Reference: 2015FI_B2 00171), by the Direcció General de Recerca of Generalitat de Catalunya (SAC group Reference 2014/SGR/374), and by the Research Council of Norway through the Centers of Excellence funding scheme (project number 223254 - Centre for Autonomous Marine Operations and Systems, Norwegian University of Science and Technology). Damiano Rotondo also acknowledges that part of this work was carried out during the tenure of an ERCIM Alain Bensoussan Fellowship programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-membership approach and Kalman observer based on zonotopes for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a set-membership state estimator and a zonotopic Kalman observer for discrete-time descriptor systems. Both approaches are developed in a set-based context considering system disturbances, measurement noise, and unknown inputs. This set-membership state estimation approach determines the set of consistent states with the model and measurements by constructing a parameterized intersection zonotope. Two methods to minimize the size of this intersection zonotope are provided: one inspired by Kalman filtering and the other based on solving an optimization problem involving a series of linear matrix inequalities. Additionally, we propose a zonotopic Kalman observer for discrete-time descriptor systems. Moreover, the relationship between both approaches is discussed. In particular, it is proved that the zonotopic Kalman observer in the current estimation type is equivalent to the set-membership approach. Finally, a numerical example is used to illustrate and compare the effectiveness of the proposed approaches., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243-C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R), and the FPI grant (ref. BES-2014-068319)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-model prediction for demand forecast in water distribution networks

  • López Farías, Rodrigo
  • Rodríguez-Rangel, Héctor
  • Puig, Vicenç
  • Flores, Juan J.
This paper presents a multi-model predictor called Qualitative Multi-Model Predictor Plus (QMMP+) for demand forecast in water distribution networks. QMMP+ is based on the decomposition of the quantitative and qualitative information of the time-series. The quantitative component (i.e., the daily consumption prediction) is forecasted and the pattern mode estimated using a Nearest Neighbor (NN) classifier and a Calendar. The patterns are updated via a simple Moving Average scheme. The NN classifier and the Calendar are executed simultaneously every period and the most suited model for prediction is selected using a probabilistic approach. The proposed solution for water demand forecast is compared against Radial Basis Function Artificial Neural Networks (RBF-ANN), the statistical Autoregressive Integrated Moving Average (ARIMA), and Double Seasonal Holt-Winters (DSHW) approaches, providing the best results when applied to real demand of the Barcelona Water Distribution Network. QMMP+ has demonstrated that the special modelling treatment of water consumption patterns improves the forecasting accuracy, This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Union through FEDER program through the projects DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A shifting pole placement approach for the design of performance-varying multivariable PID controllers via BMIs

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Puig, Vicenç
  • Quevedo, Joseba
In this paper, the design of a performance-varying multivariable Proportional-Integral-Derivative (PID) controllers is presented. The main objective is to provide a framework for changing online the closed-loop behavior of the controlled system using the shifting pole placement approach. In order to carry out this target, the PID design problem is transformed into a static output feedback design problem which is analyzed through the linear parameter-varying (LPV) paradigm. An academic example is used to demonstrate the effectiveness of the proposed approach., This work has been partly funded by MINECO and FEDER through the project CICYT HARCRICS (ref.DPI2014-58104-R) and SCAV (ref.DPI2017-88403-R). This work has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formación (FJCI-2016-2901)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-layer health-aware economic predictive control of a pasteurization pilot plant

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes two different health-aware economic predictive control strategies that aim at minimizing the damage of components in a pasteurization plant. The damage is assessed with a rainflow-counting algorithm that allows estimating the components’ fatigue. By using the results obtained from this algorithm, a simplified model that characterizes the health of the system is developed and integrated into the predictive controller. The overall control objective is modified by adding an extra criterion that takes into account the accumulated damage. The first strategy is a single-layer predictive controller with an integral action to eliminate the steady-state error that appears when adding the extra criterion. In order to achieve the best minimal accumulated damage and operational costs, the single-layer approach is improved with a multi-layer control scheme, where the solution of the dynamic optimization problem is obtained from the model in two different time scales. Finally, to achieve the advisable trade-off between minimal accumulated damage and operational costs, both control strategies are compared in simulation over a utility-scale pasteurization plant., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (DPI2016-76493-C3-3-R), and by MINECO and FEDER through the project HARCRICS (DPI2014-58104-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

State estimation and decoupling of unknown inputs in uncertain LPV systems using interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval observer for state estimation and unknown inputs decoupling in uncertain continuous-time LPV systems. Two different problems are considered and solved: (1) the evaluation of the set of admissible values for the state at each instant of time; and (2) the unknown input observation, i.e. the design of the observer in such a way that some information about the nature of the unknown inputs affecting the system can be obtained. In both cases, analysis and design conditions, which rely on solving linear matrix inequalities (LMIs), are provided. The effectiveness and appeal of the proposed method is demonstrated using an illustrative application to a two-joint planar robotic manipulator., This work has been supported by a grant from Iceland, Liecht- enstein and Norway through the EEA Financial Mechanism. Operated by Universidad Complutense de Madrid (ref. 006- ABEL-IM-2014B). The authors also acknowledge the support by MINECO and FEDER through the project CICYT HAR- CRICS (ref. DPI2014-58104-R), by AGAUR through the con- tracts FI-DGR 2014 (ref. 2014FI_B1_00172) and FI-DGR 2015 (ref. 2015FI_B2_00171), by the DGR of the Generalitat de Catalunya (ref. 2014/SGR/374) and by the Research Council of Norway through the Centres of Excellence funding scheme (ref. 223254 - AMOS). D. Rotondo is also supported by the ERCIM Alain Bensoussan Fellowship programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault detection and isolation using viability theory and interval observers

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
This paper proposes the use of interval observers and viability theory in fault detection and isolation (FDI). Viability theory develops mathematical and algorithmic methods for investigating the viability constraints characterisation of dynamic evolutions of complex systems under uncertainty. These methods can be used for checking the consistency between observed and predicted behaviour by using simple sets that approximate the exact set of possible behaviour (in the parameter or state space). In this paper, FDI is based on checking for an inconsistency between the measured and predicted behaviours using viability theory concepts and sets. Finally, an example is provided in order to show the usefulness of the proposed approach., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243- C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HAR- CRICS (ref. DPI2014-58104-R)., Postprint, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and fault diagnosis of flat inland navigation canals

  • Segovia Castillo, Pablo
  • Blesa, Joaquim
  • Horváth, Klaudia
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Puig, Vicenç
  • Duviella, Eric
This article regards the development of an analytical redundancy-based approach for detecting and isolating both sensor and actuator faults in flat inland navigation canals. Inland navigation networks are principally used for transport and are composed of many canalized natural rivers and artificial canals characterized by no slope. These canals are strongly affected by resonance phenomena, which can create waves such that the navigation condition might not be guaranteed. It is, therefore, required to ensure dealing with fault-free measured data and actuators. The proposed approach is based on the integrator delay zero model of the flat inland navigation canal. The proposed method is tested by considering the Cuinchy–Fontinettes navigation reach (in the north of France) to detect and isolate the occurrence of faults in the Cuinchy and Fontinettes level sensors and in the Cuinchy gate., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECOP) and FEDER through the project HARCRICS (ref. DPI2014-58104- R) and through the grant IJCI-2014-20801., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer-based fault detectability analysis using mixed set-invariance theory and sensitivity analysis approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper addresses the characterisation of the minimum detectable fault (MDF) by means of residual sensitivity integrated with the set-invariance theory when using an interval observer-based approach as a fault detection (FD) scheme. Uncertainties (disturbances and noise) are considered as of unknown but bounded nature (i.e. in the set-membership framework). A zonotopic-set representation towards reducing set operations to simple matrix calculations is utilised to bound the state/output estimations provided by the interval observer-based approach. In order to show the connection between sensitivity and set-invariance analyses, mathematical expressions of the MDF are derived when considering different types of faults. Finally, a simulation case study based on a quadruple-tank system is employed to both illustrate and discuss the effectiveness of the proposed approach. The interval observer-based FD scheme is used to test the MDF obtained from the integration of both residual sensitivity analysis and set-invariance theory in the considered case study., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Ag`encia de Gesti´o d’Ajuts Universitaris i de Recerca.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal energy dispatch in a smart micro-grid system using economic model predictive control

  • Nassourou, M.
  • Blesa, Joaquim
  • Puig, Vicenç
The problem of energy dispatch in heterogeneous complex systems such as smart grids cannot be efficiently addressed using classical control or ad hoc methods. This article discusses the application of economic model predictive control to the management of a smart micro-grid system connected to an electrical power grid. The considered system is composed of several subsystems, namely, some photovoltaic panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices (batteries). The batteries are charged with the energy from the photovoltaic panels, wind and hydroelectric generators, and they are discharged whenever the generators produce less energy than needed. The subsystems are interconnected via a DC Bus, from which load demands are satisfied. Modeling smart grids components is based on the generalized flow-based networked systems paradigm, and assuming energy generators to be stable, load demands and energy prices are known. This study shows that economic model predictive control is economically superior to a two-layer hierarchical model predictive control., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECOP) and FEDER through the project HARCRICS (ref. DPI2014-58104- R) and through the grant IJCI-2014-20801 and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stochastic model predictive control based on Gaussian processes applied to drinking water networks

  • Wang, Ye|||0000-0003-1395-1676
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This study focuses on developing a stochastic model predictive control (MPC) strategy based on Gaussian processes (GPs) for propagating system disturbances in a receding horizon way. Using a probabilistic system representation, the state trajectories considering the influence of disturbances can be obtained through the uncertainty propagation by using GPs. This fact allows obtaining the confidence intervals for state evolutions over the MPC prediction horizon that are included into the MPC objective function and constraints. The feasibility of the proposed MPC strategy considering the incorporated results of disturbance forecasting is also discussed. Simulation results obtained from the application of the proposed approach to the Barcelona drinking water network taking real demand data into account are presented. The comparison with the well-known certainty-equivalent MPC shows the effectiveness of the proposed stochastic MPC approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust fault detection of singular LPV systems with multiple time-varying delays

  • Hassanabadi, Amir Hossein
  • Shafiee, Masoud
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
In this paper, the robust fault detection problem for LPV singular delayed systems in the presence of disturbances and actuator faults is considered. For both disturbance decoupling and actuator fault detection, an unknown input observer (UIO) is proposed. The aim is to compute a residual signal which has minimum sensitivity to disturbances while having maximum sensitivity to faults. Robustness to unknown inputs is formulated in the sense of the H-infinity-norm by means of the bounded real lemma (BRL) for LPV delayed systems. In order to formulate fault sensitivity conditions, a reference model which characterizes the ideal residual behavior in a faulty situation is considered. The residual error with respect to this reference model is computed. Then, the maximization of the residual fault effect is converted to minimization of its effect on the residual error and is addressed by using the BRL. The compromise between the unknown input effect and the fault effect on the residual is translated into a multi-objective optimization problem with some LMI constraints. In order to show the efficiency and applicability of the proposed method, a part of the Barcelona sewer system is considered.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fault estimation of wind turbines using combined adaptive and parameter estimation schemes

  • Witczak, Marcin
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Pazera, Marcin
"This is the peer reviewed version of the following article: Witczak M, Rotondo D, Puig V, Nejjari F, Pazera M. Fault estimation of wind turbines using combined adaptive and parameter estimation schemes. Int J Adapt Control Signal Process. 2017, which has been published in final form at 10.1002/acs.2792. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.", This paper addresses the problem of fault estimation in wind turbines using a joint fault and state estimation scheme. The scheme assumes a set of possible faults affecting the dynamics of the wind turbine. Then, a combined adaptive and parameter estimation scheme is developed taking into consideration that process disturbances and sensor noises are unknown but bounded in an ellipsoid. Two subcases are considered depending on the satisfaction of a certain rank condition. The proposed approach is applied to a wind turbine based on a benchmark system model. The benchmark represents relevant fault scenarios, including sensor, actuator, and process faults. The proposed approach focuses on the last group of faults. Finally, the obtained results show that a satisfactory fault estimation is achieved against a set of predefined fault scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust unknown input observer for state and fault estimation in discrete-time Takagi-Sugeno systems

  • Rotondo, Damiano|||0000-0002-8855-5582
  • Witczak, Marcin
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Pazera, Marcin
In this paper, a robust unknown input observer (UIO) for the joint state and fault estimation in discrete-time Takagi-Sugeno (TS) systems is presented. The proposed robust UIO, by applying the H-infinity framework, leads to a less restrictive design procedure with respect to recent results found in the literature. The resulting design procedure aims at achieving a prescribed attenuation level with respect to the exogenous disturbances, while obtaining at the same time the convergence of the observer with a desired bound on the decay rate. An extension to the case of unmeasurable premise variables is also provided. Since the design conditions reduce to a set of linear matrix inequalities that can be solved efficiently using the available software, an evident advantage of the proposed approach is its simplicity. The final part of the paper presents an academic example and a real application to a multi-tank system, which exhibit clearly the performance and effectiveness of the proposed strategy.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Model- vs. data-based approaches applied to fault diagnosis in potable water supply networks

  • Cugueró Escofet, Miquel Àngel|||0000-0001-9525-1790
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Alippi, Cesare
  • Roveri, Manuel
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • García Valverde, Diego
  • Trovò, F
In this paper, the problem of fault diagnosis in drinking water transport networks (DWTNs) is addressed. Two different fault diagnosis approaches are proposed to deal with this problem. The first one is based on a model-based approach exploiting a-priori information regarding physical/temporal relations existing between the measured variables in the monitored system, providing fault detection and isolation capabilities by means of the residuals generated using these measured variables and their estimations. This a-priori information is provided by the topology and the physical relations between the elements constituting the system, which is used by design in order to derive fault diagnosis. Differently, the second approach does not require the physical a-priori information of the network to operate. It relies on a data-driven solution meant to exploit the spatial and temporal relationships present in the acquired data streams to detect and isolate faults. Relationships between data streams are modelled through sequences of linear dynamic time-invariant models whose estimated coefficients are used to feed a Hidden Markov Model (HMM). When the pattern of estimated coefficients cannot be explained by the trained HMM, a change is detected. Afterwards, a cognitive method based on a functional graph representation of the system isolates the fault. Finally, a performance comparison between these two approaches is carried out using a part of the Barcelona water transport network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fault tolerant control of uncertain dynamical systems using interval virtual actuators

  • Rotondo, Damiano|||0000-0002-8855-5582
  • Cristofaro, Andrea
  • Johansen, Tor Arne
This is the peer reviewed version of the following article: Rotondo D, Cristofaro A, Johansen TA. Fault tolerant control of uncertain dynamical systems using interval virtual actuators. Int J Robust Nonlinear Control. 2018;28:611–624, which has been published in final form at https://doi.org/10.1002/rnc.3888. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this paper, a model reference fault tolerant control strategy based on a reconfiguration of the reference model, with the addition of a virtual actuator block, is presented for uncertain systems affected by disturbances and sensor noise. In particular, this paper (1) extends the reference model approach to the use of interval state observers, by considering an error feedback controller, which uses the estimated bounds for the error between the real state and the reference state, and (2) extends the virtual actuator approach to the use of interval observers, which means that the virtual actuator is added to the control loop to preserve the nonnegativity of the interval estimation errors and the boundedness of the involved signals, in spite of the fault occurrence. In both cases, the conditions to assure the desired operation of the control loop are provided in terms of linear matrix inequalities. An illustrative example is used to show the main characteristics of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using Bayesian classifiers

  • Soldevila Coma, Adrià
  • Fernández Canti, Rosa M.|||0000-0002-9381-6601
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Tornil Sin, Sebastián|||0000-0003-1799-2192
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents a method for leak localization in water distribution networks (WDNs) based on Bayesian classifiers. Probability density functions for pressure residuals are calibrated off-line for all the possible leak scenarios by using a hydraulic simulator, and considering the leak size uncertainty, demand uncertainty and sensor noise. A Bayesian classifier is applied on-line to the computed residuals to determine the location of leaks in the WDN. A time horizon based reasoning combined with the Bayesian classifier is also proposed to improve the localization accuracy. Two case studies based on the Hanoi and the Nova Icària networks are used to illustrate the performance of the proposed approach. Simulation results are presented for the Hanoi case study, whereas results for a real leak scenario are shown for the Nova Icària case study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Formalism for a multiresolution time series database model

  • Llusà Serra, Aleix|||0000-0002-1682-9564
  • Vila Marta, Sebastià|||0000-0001-9069-1340
  • Escobet Canal, Teresa|||0000-0001-6090-1538
We formalise a specialised database management system model for time series using a multiresolution approach. These special purpose database systems store time series lossy compressed in a space-bounded storage. Time series can be stored at multiple resolutions, using distinct attribute aggregations and keeping its temporal attribute managed in a consistent way. The model exhibits a generic approach that facilitates its customisation to suit better the actual application requirements in a given context. The elements, the meaning of which depends on a real application, are of generic nature. Furthermore, we consider some specific time series properties that are a challenge in the multiresolution approach. We also describe a reference implementation of the model and introduce a use case based on real data., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An LMI approach to robust fault estimation for a class of nonlinear systems

  • Witczak, Marcin
  • Buciakowski, Mariusz
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
The paper presents a robust fault estimation approach for a class of nonlinear discrete-time systems. In particular, two sources of uncertainty are present in the considered class of systems, that is, an unknown input and an exogenous external disturbance. Thus, apart from simultaneous state and fault estimation, the objective is to decouple the effect of an unknown input while minimizing the influence of the exogenous external disturbance within the inline image framework. The resulting design procedure guarantees that a prescribed disturbance attenuation level is achieved with respect to the state and fault estimation error while assuring the convergence of the observer. The core advantage of the proposed approach is its simplicity by reducing the fault estimation problem to matrix inequalities formulation. In addition, the design conditions ensure the convergence of the observer with guaranteed inline image performance. The effectiveness of the proposed approach is demonstrated by its application to a twin rotor multiple-input multiple-output system
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust Periodic Economic Predictive Control based on Interval Arithmetic for Water Distribution Networks

  • Wang, Ye|||0000-0003-1395-1676
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper addresses a robust periodic economic model predictive control (EMPC) based on interval arithmetic with unknown-but-bounded additive disturbances for the management of water distribution networks (WDNs). The system constraints in presence of system disturbances are tightened along the prediction horizon by means of the proposed interval arithmetic and considering that system variables in the WDN model are also subject to some algebraic equations. These algebraic equations should be satisfied when the disturbances have effects on those system variables. The EMPC controller is designed with adding the terminal state constraint. The periodically optimal steady states are obtained by employing a periodic EMPC planner with the nominal model. This periodic steady states are subsequently used to be terminal states. The on-line robust constraint satisfactions are implemented into the robust periodic EMPC controller. Finally, the proposed control strategy is verified using a case study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reliability computation within an MPC health-aware framework

  • Salazar Cortés, Jean Carlo|||0000-0003-3271-6647
  • Sarrate Estruch, Ramon|||0000-0002-9979-5899
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Weber, Philipe
  • Theilliol, Didier
This paper presents a comparison between two different approaches for reliability consideration within a Health-Aware Control framework which takes into account system and component reliability by means of reliability importance measures. The two different approaches for reliability assessment consideration are the instantaneous reliability and the expected one. The system reliability performance under both approaches is compared in a control strategy applied to a drinking water network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Diagnosis of icing and actuator faults in UAVs using LPV unknown input observers

  • Rotondo, Damiano|||0000-0002-8855-5582
  • Cristofaro, Andrea
  • Johansen, Tor Arne
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper proposes a discrete-time linear parameter varying (LPV) unknown input observer (UIO) for the diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs). The proposed approach, which is suited to an implementation on-board, exploits a complete 6-degrees of freedom (DOF) UAV model, which includes the coupled longitudinal/lateral dynamics and the impact of icing. The LPV formulation has the advantage of allowing the icing diagnosis scheme to be consistent with a wide range of operating conditions. The developed theory is supported by simulations illustrating the diagnosis of actuator faults and icing in a small UAV. The obtained results validate the effectiveness of the proposed approach., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An LMI approach to robust fault estimation for a class of nonlinear systems

  • Witczak, Marcin
  • Buciakowski, Mariusz
  • Puig Cayuela, Vicenç
  • Rotondo, Damiano
  • Nejjari Akhi-Elarab, Fatiha
The paper presents a robust fault estimation approach for a class of nonlinear discrete-time systems. In particular, two sources of uncertainty are present in the considered class of systems, that is, an unknown input and an exogenous external disturbance. Thus, apart from simultaneous state and fault estimation, the objective is to decouple the effect of an unknown input while minimizing the influence of the exogenous external disturbance within the inline image framework. The resulting design procedure guarantees that a prescribed disturbance attenuation level is achieved with respect to the state and fault estimation error while assuring the convergence of the observer. The core advantage of the proposed approach is its simplicity by reducing the fault estimation problem to matrix inequalities formulation. In addition, the design conditions ensure the convergence of the observer with guaranteed inline image performance. The effectiveness of the proposed approach is demonstrated by its application to a twin rotor multiple-input multiple-output system, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Formalism for a multiresolution time series database model

  • Llusà Serra, Aleix
  • Vila Marta, Sebastià
  • Escobet Canal, Teresa
We formalise a specialised database management system model for time series using a multiresolution approach. These special purpose database systems store time series lossy compressed in a space-bounded storage. Time series can be stored at multiple resolutions, using distinct attribute aggregations and keeping its temporal attribute managed in a consistent way. The model exhibits a generic approach that facilitates its customisation to suit better the actual application requirements in a given context. The elements, the meaning of which depends on a real application, are of generic nature. Furthermore, we consider some specific time series properties that are a challenge in the multiresolution approach. We also describe a reference implementation of the model and introduce a use case based on real data., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust unknown input observer for state and fault estimation in discrete-time Takagi-Sugeno systems

  • Rotondo, Damiano
  • Witczak, Marcin
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
  • Pazera, Marcin
In this paper, a robust unknown input observer (UIO) for the joint state and fault estimation in discrete-time Takagi-Sugeno (TS) systems is presented. The proposed robust UIO, by applying the H-infinity framework, leads to a less restrictive design procedure with respect to recent results found in the literature. The resulting design procedure aims at achieving a prescribed attenuation level with respect to the exogenous disturbances, while obtaining at the same time the convergence of the observer with a desired bound on the decay rate. An extension to the case of unmeasurable premise variables is also provided. Since the design conditions reduce to a set of linear matrix inequalities that can be solved efficiently using the available software, an evident advantage of the proposed approach is its simplicity. The final part of the paper presents an academic example and a real application to a multi-tank system, which exhibit clearly the performance and effectiveness of the proposed strategy., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stochastic model predictive control based on Gaussian processes applied to drinking water networks

  • Wang, Ye
  • Ocampo-Martínez, Carlos
  • Puig Cayuela, Vicenç
This study focuses on developing a stochastic model predictive control (MPC) strategy based on Gaussian processes (GPs) for propagating system disturbances in a receding horizon way. Using a probabilistic system representation, the state trajectories considering the influence of disturbances can be obtained through the uncertainty propagation by using GPs. This fact allows obtaining the confidence intervals for state evolutions over the MPC prediction horizon that are included into the MPC objective function and constraints. The feasibility of the proposed MPC strategy considering the incorporated results of disturbance forecasting is also discussed. Simulation results obtained from the application of the proposed approach to the Barcelona drinking water network taking real demand data into account are presented. The comparison with the well-known certainty-equivalent MPC shows the effectiveness of the proposed stochastic MPC approach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust fault detection of singular LPV systems with multiple time-varying delays

  • Hassanabadi, Amir Hossein
  • Shafiee, Masoud
  • Puig Cayuela, Vicenç
In this paper, the robust fault detection problem for LPV singular delayed systems in the presence of disturbances and actuator faults is considered. For both disturbance decoupling and actuator fault detection, an unknown input observer (UIO) is proposed. The aim is to compute a residual signal which has minimum sensitivity to disturbances while having maximum sensitivity to faults. Robustness to unknown inputs is formulated in the sense of the H-infinity-norm by means of the bounded real lemma (BRL) for LPV delayed systems. In order to formulate fault sensitivity conditions, a reference model which characterizes the ideal residual behavior in a faulty situation is considered. The residual error with respect to this reference model is computed. Then, the maximization of the residual fault effect is converted to minimization of its effect on the residual error and is addressed by using the BRL. The compromise between the unknown input effect and the fault effect on the residual is translated into a multi-objective optimization problem with some LMI constraints. In order to show the efficiency and applicability of the proposed method, a part of the Barcelona sewer system is considered., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using Bayesian classifiers

  • Soldevila Coma, Adrià
  • Fernández Canti, Rosa M.
  • Blesa Izquierdo, Joaquim
  • Tornil Sin, Sebastián
  • Puig Cayuela, Vicenç
This paper presents a method for leak localization in water distribution networks (WDNs) based on Bayesian classifiers. Probability density functions for pressure residuals are calibrated off-line for all the possible leak scenarios by using a hydraulic simulator, and considering the leak size uncertainty, demand uncertainty and sensor noise. A Bayesian classifier is applied on-line to the computed residuals to determine the location of leaks in the WDN. A time horizon based reasoning combined with the Bayesian classifier is also proposed to improve the localization accuracy. Two case studies based on the Hanoi and the Nova Icària networks are used to illustrate the performance of the proposed approach. Simulation results are presented for the Hanoi case study, whereas results for a real leak scenario are shown for the Nova Icària case study., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust Periodic Economic Predictive Control based on Interval Arithmetic for Water Distribution Networks

  • Wang, Ye
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
This paper addresses a robust periodic economic model predictive control (EMPC) based on interval arithmetic with unknown-but-bounded additive disturbances for the management of water distribution networks (WDNs). The system constraints in presence of system disturbances are tightened along the prediction horizon by means of the proposed interval arithmetic and considering that system variables in the WDN model are also subject to some algebraic equations. These algebraic equations should be satisfied when the disturbances have effects on those system variables. The EMPC controller is designed with adding the terminal state constraint. The periodically optimal steady states are obtained by employing a periodic EMPC planner with the nominal model. This periodic steady states are subsequently used to be terminal states. The on-line robust constraint satisfactions are implemented into the robust periodic EMPC controller. Finally, the proposed control strategy is verified using a case study., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Model- vs. data-based approaches applied to fault diagnosis in potable water supply networks

  • Cugueró Escofet, Miquel Àngel
  • Quevedo Casín, Joseba Jokin
  • Alippi, Cesare
  • Roveri, Manuel
  • Puig Cayuela, Vicenç
  • García Valverde, Diego
  • Trovò, F
In this paper, the problem of fault diagnosis in drinking water transport networks (DWTNs) is addressed. Two different fault diagnosis approaches are proposed to deal with this problem. The first one is based on a model-based approach exploiting a-priori information regarding physical/temporal relations existing between the measured variables in the monitored system, providing fault detection and isolation capabilities by means of the residuals generated using these measured variables and their estimations. This a-priori information is provided by the topology and the physical relations between the elements constituting the system, which is used by design in order to derive fault diagnosis. Differently, the second approach does not require the physical a-priori information of the network to operate. It relies on a data-driven solution meant to exploit the spatial and temporal relationships present in the acquired data streams to detect and isolate faults. Relationships between data streams are modelled through sequences of linear dynamic time-invariant models whose estimated coefficients are used to feed a Hidden Markov Model (HMM). When the pattern of estimated coefficients cannot be explained by the trained HMM, a change is detected. Afterwards, a cognitive method based on a functional graph representation of the system isolates the fault. Finally, a performance comparison between these two approaches is carried out using a part of the Barcelona water transport network., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reliability computation within an MPC health-aware framework

  • Salazar Cortés, Jean Carlo
  • Sarrate Estruch, Ramon
  • Nejjari Akhi-Elarab, Fatiha
  • Weber, Philipe
  • Theilliol, Didier
This paper presents a comparison between two different approaches for reliability consideration within a Health-Aware Control framework which takes into account system and component reliability by means of reliability importance measures. The two different approaches for reliability assessment consideration are the instantaneous reliability and the expected one. The system reliability performance under both approaches is compared in a control strategy applied to a drinking water network., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fault estimation of wind turbines using combined adaptive and parameter estimation schemes

  • Witczak, Marcin
  • Rotondo, Damiano
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
  • Pazera, Marcin
"This is the peer reviewed version of the following article: Witczak M, Rotondo D, Puig V, Nejjari F, Pazera M. Fault estimation of wind turbines using combined adaptive and parameter estimation schemes. Int J Adapt Control Signal Process. 2017, which has been published in final form at 10.1002/acs.2792. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.", This paper addresses the problem of fault estimation in wind turbines using a joint fault and state estimation scheme. The scheme assumes a set of possible faults affecting the dynamics of the wind turbine. Then, a combined adaptive and parameter estimation scheme is developed taking into consideration that process disturbances and sensor noises are unknown but bounded in an ellipsoid. Two subcases are considered depending on the satisfaction of a certain rank condition. The proposed approach is applied to a wind turbine based on a benchmark system model. The benchmark represents relevant fault scenarios, including sensor, actuator, and process faults. The proposed approach focuses on the last group of faults. Finally, the obtained results show that a satisfactory fault estimation is achieved against a set of predefined fault scenarios., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Diagnosis of icing and actuator faults in UAVs using LPV unknown input observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Johansen, Tor Arne
  • Nejjari Akhi-Elarab, Fatiha
  • Puig Cayuela, Vicenç
This paper proposes a discrete-time linear parameter varying (LPV) unknown input observer (UIO) for the diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs). The proposed approach, which is suited to an implementation on-board, exploits a complete 6-degrees of freedom (DOF) UAV model, which includes the coupled longitudinal/lateral dynamics and the impact of icing. The LPV formulation has the advantage of allowing the icing diagnosis scheme to be consistent with a wide range of operating conditions. The developed theory is supported by simulations illustrating the diagnosis of actuator faults and icing in a small UAV. The obtained results validate the effectiveness of the proposed approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fault tolerant control of uncertain dynamical systems using interval virtual actuators

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Johansen, Tor Arne
This is the peer reviewed version of the following article: Rotondo D, Cristofaro A, Johansen TA. Fault tolerant control of uncertain dynamical systems using interval virtual actuators. Int J Robust Nonlinear Control. 2018;28:611–624, which has been published in final form at https://doi.org/10.1002/rnc.3888. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this paper, a model reference fault tolerant control strategy based on a reconfiguration of the reference model, with the addition of a virtual actuator block, is presented for uncertain systems affected by disturbances and sensor noise. In particular, this paper (1) extends the reference model approach to the use of interval state observers, by considering an error feedback controller, which uses the estimated bounds for the error between the real state and the reference state, and (2) extends the virtual actuator approach to the use of interval observers, which means that the virtual actuator is added to the control loop to preserve the nonnegativity of the interval estimation errors and the boundedness of the involved signals, in spite of the fault occurrence. In both cases, the conditions to assure the desired operation of the control loop are provided in terms of linear matrix inequalities. An illustrative example is used to show the main characteristics of the proposed approach., Peer Reviewed, Postprint (author's final draft)