Pasar al contenido principal

SEGURIDAD Y CONTROL EN VEHICULOS AUTONOMOS

DPI2017-88403-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 110
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis y diseño de sistemas lineales con parámetros variantes utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem S.
  • Nejjari, Fatiha
  • Puig, Vicenç
[EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H∞ performance and guaranteed quadratic cost, as well as different control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., [ES] En este artículo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H∞ garantizado y el coste cuadrático garantizado, así como también diferentes estructuras de control, tales como el control por realimentación de estado, el control por realimentación de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigación (AEI) mediante el sello de excelencia científica María de Maetzu al IRI (ref. MDM-2016-0656),la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019),y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A distributed set-membership approach based on zonotopes for interconnected systems

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado en la IEEE Conference on Decision and Control (CDC), celebrada en Miami Beach (FL, USA), del 17 al 19 de diciembre de 2018, This paper proposes a distributed set-membership approach based on zonotopes for interconnected systems with coupled states and unknown-but-bounded uncertainties (both state disturbances and measurement noise). The objective of the distributed set-membership approach is to find a sequence of distributed zonotopes to bound uncertain states of each subsystem (called agent) instead of making use of a single zonotope to bound all the uncertain states. In the proposed approach, these distributed state bounding zonotopes are only corrected by their own measurement outputs. To predict the state at the next sampling time, each agent sends its own state-bounding zonotope to its neighbors. For achieving robust state estimation, we propose a novel optimization problem based on the P-radius minimization criterion. Finally, the effectiveness of the proposed approach is provided with a numerical example., This work has been partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319) and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A shifting pole placement approach for the design of performance-varying multivariable PID controllers via BMIs

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Puig, Vicenç
  • Quevedo, Joseba
In this paper, the design of a performance-varying multivariable Proportional-Integral-Derivative (PID) controllers is presented. The main objective is to provide a framework for changing online the closed-loop behavior of the controlled system using the shifting pole placement approach. In order to carry out this target, the PID design problem is transformed into a static output feedback design problem which is analyzed through the linear parameter-varying (LPV) paradigm. An academic example is used to demonstrate the effectiveness of the proposed approach., This work has been partly funded by MINECO and FEDER through the project CICYT HARCRICS (ref.DPI2014-58104-R) and SCAV (ref.DPI2017-88403-R). This work has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formación (FJCI-2016-2901)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A two-tank benchmark for detection and isolation of cyber attacks

  • Quevedo, Joseba
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
This paper presents a benchmark for the detection and isolation of cyber attacks, which is a non-linear controlled interconnected system based on a two tank system. In this benchmark, a malicious attacker wants to remain hidden while stealing water by altering the signals of the sensors of the levels of the tanks. It is assumed that the attacker can steal water from the tanks using extraction pumps with pre-established flow rates and, depending on the theft and the type of sensor alteration, different attack scenarios are proposed., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agència de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frequency-based detection of replay attacks: application to a multiple tank system

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a frequency-based method for detecting replay attacks and its application to a multiple tank system. This method introduces a sinusoidal signal with a time-varying frequency (authentication signature) into the closed-loop system and checks whether the output signal is compatible with the signature or not. The effectiveness of the method is illustrated through simulation scenarios using a 9-tank system under different situations., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agènda de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Health-aware LPV-MPC based on a reliability-based remaining useful life assessment

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
One of the relevant information provided by the prognostics and health management algorithms is the estimation of the Remaining Useful Life (RUL). The prediction of the expected RUL is very useful to decrease maintenance cost, operational downtime and safety hazards. This paper proposes a new strategy of health-aware Model Predictive Control (MPC) for a Linear Parameter Varying (LPV) system that includes as an additional goal extending the system RUL via their estimation using reliability tools. In this approach, the RUL maximization is included in the objective function of the LPV-MPC controller. The RUL is included in the MPC model as an extra parameter varying equation that considers the control action as scheduling variable. The proposed control approach allows the controller to accommodate to the parameter changes. Through computing an estimation of the state variables during prediction, the MPC model can be modified to the estimated state evolution at each time instant. Moreover, for solving the optimization problem by using a series of Quadratic Programs (QP) in each time instant, a new iterative approach is exhibited, which improves the computational efficiency. A pasteurization plant control system is used as a case study to illustrate the performance of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016- 76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer fault detection ensuring detectability and isolability by using a set-invariance approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes the design of an interval observer-based Fault Detection and Isolation (FDI) algorithm using the set-invariance approach. Using this approach, both fault detectability and isolability properties of the proposed interval observer based FDI algorithm can be characterized in system steady-state operation. The effect of the uncertainty is taken into account using zonotopic-set representations. Finally, a simulation example based on a two-tanks system is employed to both illustrate and discuss the effectiveness of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling uncertainty for leak localization in water networks

  • Blesa, Joaquim
  • Pérez, Ramon
The performance and success of model-based leak localization methods applied to water distribution networks (WDN) highly depends on the uncertainty of the system considered. This work proposes an original method of modeling the effect of uncertainties in these networks. The proposed method is based on the collection of real data in the water network in the absence of leaks. The discrepancy (residual) between the measured data and the one provided by a simulator of the network in normal operation is used to extrapolate the possible residuals in the different leak scenarios. In addition, indicators for assessing the effect of uncertainty in the performance of leak localization methods based on residual correlation analysis are provided. The error in terms of correlation intervals and leak localzation assessment between the proposed approximation and the real one is studied by means a simplified model of the WDN of Hanoi (Vietnam)., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493), SCAV (ref. MINECO DPI2017-88403-R) and through the grant IJCI-2014-20801. This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pumps condition assessment in water distribution networks

  • Soldevila, Adrià
  • Blesa, Joaquim
  • Fernández Cantí, Rosa M.
  • Tornil-Sin, Sebastian
  • Meseguer, Jordi
  • Puig, Vicenç
This paper presents a method for the detection of faults in electrical pumps. The method relies on the computation of two features, the pump efficiency and the hydraulic balance, that present reference values during healthy pump operation and change when the pump is affected by a fault. In this paper, the CUSUM Change Detection Test and the Mann-Whitney Change Point Method are proposed as change detection algorithms to process both features. The method has been applied to a real installation with several pumps and the results are reported in the paper., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493), SCAV (ref. MINECO DPI2017-88403-R) and through the grant IJCI-2014-20801. This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by AGAUR and the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI_B 00591)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust periodic economic model predictive control using probabilistic set invariance for descriptor systems

  • Wang, Ye
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a robust periodic economic model predictive control (MPC) using probabilistic set invariance for discrete-time descriptor systems. The considered systems are affected by additive disturbances that are bounded and follow a zero-mean Gaussian distribution. To guarantee robustness of the proposed robust economic MPC, a probabilistic invariant set with a given probability is used to contract the state and input constraints. An auxiliary input variable is defined to satisfy algebraic equations from descriptor systems in presence of disturbances. Finally, an application of the proposed MPC strategy to a smart micro-grid is provided to illustrate the performance., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensor fault diagnosis in inland navigation networks based on a grey-box model

  • Segovia Castillo, Pablo
  • Blesa, Joaquim
  • Duviella, Eric
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Puig, Vicenç
Inland navigation networks are equipped with limnimeters to measure and record water level data for the control of water levels and the management of water resources. When faults occur on sensors, corrupted data can be considered as correct, leading to undesirable management actions. Therefore, it is necessary to detect and localize these faults. In this paper, the detection and localization of sensor faults is performed through the analysis of the parameters of a grey-box model, which are obtained from available real data. The parameters are determined with a sliding window, with the exception of the delays, which are considered known a priori. A fault is detected and then localized when there is a change in the value of the parameters. This approach is well suited for constant faults and particularly well adapted for intermittent faults. Data of an inland navigation reach located in the north of France are used to highlight the performance of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016- 76493), SCAV (ref. MINECO DPI2017-88403-R) and through the grant IJCI-2014-20801. This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zonotopic unknown input observer of discrete-time descriptor systems for state estimation and robust fault detection

  • Wang, Ye
  • Puig, Vicenç
  • Xu, Feng
  • Cembrano, Gabriela
This paper studies a set-based unknown input observer based on zonotopes for discrete-time descriptor systems affected by uncertainties with application to state estimation and robust fault detection. In this paper, two types of uncertainties are considered: (i) disturbances and noise both bounded by zonotopes; (ii) unknown inputs that can be decoupled. In terms of different applications, the observer gain for state estimation is designed to minimize the effects of unknown-but-bounded disturbances and noise as well as state estimation errors. On the other hand, for robust fault detection, in addition to attenuating uncertainties, the designed observer gain is also expected to be sensitive to faults. To achieve this goal, we propose an iterative algorithm to design the fault detection gain. Finally, some illustrative results in an application example show the effectiveness of the proposed algorithms., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimal operation of a residential energy hub

  • Dogaheh, Z. Rasouli
  • Puig, Vicenç
Trabajo presentado en la 7th International Conference on Systems and Control (ICSC), celebrada en Valencia del 24 al 26 de octubre de 2018, In this paer, the performance of smart grids is optimized for the case of residential energy centers equipped with solar photo-voltaic (PV) units. In this regard, two optimizations were done reducing energy consumption and cost. The results obtained from this study can be used by three groups of external consumers, environmental experts and energy suppliers. Big home appliances consume large part of household energies. With the use of a smart control tool, consumers can program home appliances daily or weekly to pay less by using them in non-peak load time. Hub energy is a concept that has been considered in energy systems mixed with multiple energy carriers. A hub is determined as the locus of activity of system. Certainly, a hub is the energy core, in which all activities associated with a system including generation, storage and consumption of energy in applied equipment are determined. In this research, YALMIP toolbox in MATLAB is used for optimization of energy consumption with the objective of cost reduction associated to fossil fuels by using a PV generation unit. As a result, right time to turn each appliance on is specified considering the practical limitations of the appliances and the maximum possible application of PV unit for renewable energy generation., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault estimation based on zonotopic Kalman filter for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a set‐based approach for robust fault estimation of discrete‐time descriptor systems. The considered descriptor systems are subject to unknown‐but‐bounded uncertainties (state disturbances and measurement noise) in predefined zonotopes and additive actuator faults. The zonotopic fault estimation filter for descriptor systems is built based on fault detectability indices and matrix to estimate fault magnitude in a deterministic set. The zonotopic fault estimation filter gain is designed in a parameterized form. Within a set‐based framework, following the zonotopic Kalman filter, the optimal filter gain is computed by minimizing the size of the corresponding zonotopes to achieve robustness against uncertainties and the identification of occurred actuator faults. Besides, boundedness of the proposed zonotopic fault estimation is analyzed, which proves that the size of obtained fault estimation bounds is not growing in time. Finally, the simulation results with two application examples are provided to show the effectiveness of the proposed approach., This research was supported by the Spanish State Research Agency (AEI)and the European Regional Development Fund (ERFD) through projects DEOCS (DPI2016-76493-C3-3-R) and SCAV(DPI2017-88403-R), through the Formación de Personal Investigador (FPI) grant (BES-2014-068319), and by AGAUR ofGeneralitat de Catalunya through the Advanced Control Systems (ACS) group grant (2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator fault tolerance evaluation approach of nonlinear model predictive control systems using viability theory

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
In this paper, an approach to evaluate the actuator fault tolerance of a nonlinear model predictive control (NMPC) system using viability theory is proposed. Viability theory provides several concepts formulated in a set form (viability kernel and capture basin) that are very useful to assess if after the fault the NMPC controller will be able to achieve their goal either using a reconfiguration or an accommodation strategy. By representing the nonlinear model of the system in a linear parameter varying (LPV) form and using zonotopes to evaluate viability sets, an algorithm is developed and implemented that is able to assess the tolerance of the NMPC controller. To illustrate the proposed approach two application examples based on well-known control problems (a pasteurization plant and a mobile robot) are used., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through the projects ECOCIS (Ref. DPDEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic model predictive control based on a periodicity constraint

  • Wang, Ye
  • Salvador, José Ramón
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper addresses a novel economic model predictive control (MPC) formulation based on a periodicity constraint to achieve an optimal periodic operation for discrete-time linear systems. The proposed control strategy does not rely on forcing the terminal state by means of a terminal equality constraint and hence it does not require a priori knowledge of a periodic steady trajectory. Instead, at each sampling time step the economic cost function is optimized based on a periodicity constraint over all the periodic trajectories that include the current state. The recursive feasibility and the closed-loop convergence to a periodic steady trajectory are discussed. Moreover, an optimality certificate of this steady trajectory is provided based on the Karush–Kuhn–Tucker (KKT) optimality conditions. Finally, an application to a well-known water distribution network benchmark is presented to demonstrate the proposed economic MPC in which the closed-loop simulation results obtained with a linear model and a virtual–reality simulator are both provided., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI Grant (ref. BES-2014-068319), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Input-delay model predictive control of inland waterways considering the backwater effect

  • Segovia Castillo, Pablo
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Duviella, Eric
  • Puig, Vicenç
Trabajo presentado en el IEEE Conference on Control Technology and Applications (CCTA), celebrado en Copenhagen (Dinamarca), del 21 al 24 de agosto de 2018, Inland waterways are large-scale systems, generally characterized by negligible bottom slopes and large time delays. These features pose challenging problems at the modeling and controller design stages. A control-oriented model is derived in this work, which allows to handle these issues in a suitable manner. A predictive control scheme is developed to ensure the coordination of the control actions and their delayed effects in the system. The proposed approach is tested on a case study to highlight its performance, and it is shown that it is possible to guarantee the navigability condition of the waterways as well as other operational goals., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Análisis y Diseño de Sistemas Lineales con Parámetros Variantes Utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Nejjari, Fatiha
  • Puig, Vicenç
[ES] En este articulo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H1 garantizado y el coste cuadrático garantizado, as´ı como tambi´en diferentes estructuras de control, tales como el control por realimentacion de estado, el control por realimentacion de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., [EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H1 performance and guaranteed quadratic cost, as well as dierent control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigacion (AEI) mediante el sello de excelencia cientıfica Marıa de Maetzu al IRI (ref. MDM-2016-0656), la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019), y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A virtual actuator approach for the secure control of networked LPV systems under pulse-width modulated DoS attacks

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Puig, Vicenç
  • Escobet, Teresa
  • Quevedo, Joseba
In this paper, we formulate and analyze the problem of secure control in the context of networked linear parameter varying (LPV) systems. We consider an energy-constrained, pulse-width modulated (PWM) jammer, which corrupts the control communication channel by performing a denial-of-service (DoS) attack. In particular, the malicious attacker is able to erase the data sent to one or more actuators. In order to achieve secure control, we propose a virtual actuator technique under the assumption that the behavior of the attacker has been identified. The main advantage brought by this technique is that the existing components in the control system can be maintained without need of retuning them, since the virtual actuator will perform a reconfiguration of the plant, hiding the attack from the controller point of view. Using Lyapunov-based results that take into account the possible behavior of the attacker, design conditions for calculating the virtual actuators gains are obtained. A numerical example is used to illustrate the proposed secure control strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bibliographical review on cyber attacks from a control oriented perspective

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Data-driven approach for leak localization in water distribution networks using pressure sensors and spatial interpolation

  • Soldevila, Adrià
  • Blesa, Joaquim
  • Fernández Cantí, Rosa M.
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
This paper presents a new data-driven method for leak localization in water distribution networks. The proposed method relies on the use of available pressure measurements in some selected internal network nodes and on the estimation of the pressure at the remaining nodes using Kriging spatial interpolation. Online leak localization is attained by comparing current pressure values with their reference values. Supported by Kriging; this comparison can be performed for all the network nodes, not only for those equipped with pressure sensors. On the one hand, reference pressure values in all nodes are obtained by applying Kriging to measurement data previously recorded under network operation without leaks. On the other hand, current pressure values at all nodes are obtained by applying Kriging to the current measured pressure values. The node that presents the maximum difference (residual) between current and reference pressure values is proposed as a leaky node candidate. Thereafter, a time horizon computation based on Bayesian reasoning is applied to consider the residual time evolution, resulting in an improved leak localization accuracy. As a data-driven approach, the proposed method does not need a hydraulic model; only historical data from normal operation is required. This is an advantage with respect to most data-driven methods that need historical data for the considered leak scenarios. Since, in practice, the obtained leak localization results will strongly depend on the number of available pressure measurements and their location, an optimal sensor placement procedure is also proposed in the paper. Three different case studies illustrate the performance of the proposed methodologies., This work has been funded by the Ministerio de Economía, Industria y Competitividad (MEICOMP) of the Spanish Government and FEDER through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), by MEICOMP and FEDER through the grant IJCI-2014-20801, and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI B 00591) and the Advanced Control Systems (SAC) group grant (2017 SGR 482). The second author acknowledges the support from the Serra Húnter program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Data-driven decentralized algorithm for wind farm control with population-games assistance

  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Bianchi, Fernando D.
  • Quijano, Nicanor
In wind farms, the interaction between turbines that operate close by experience some problems in terms of their power generation. Wakes caused by upstream turbines are mainly responsible of these interactions, and the phenomena involved in this case is complex especially when the number of turbines is high. In order to deal with these issues, there is a need to develop control strategies that maximize the energy captured from a wind farm. In this work, an algorithm that uses multiple estimated gradients based on measurements that are classified by using a simple distributed population-games-based algorithm is proposed. The update in the decision variables is computed by making a superposition of the estimated gradients together with the classification of the measurements. In order to maximize the energy captured and maintain the individual power generation, several constraints are considered in the proposed algorithm. Basically, the proposed control scheme reduces the communications needed, which increases the reliability of the wind farm operation. The control scheme is validated in simulation in a benchmark corresponding to the Horns Rev wind farm., This work has been partially funded by the Spanish projects SCAV (Ref. DPI2017-88403-R) and DEOCS (Ref. DPI2016-76493-C3-3-R) and the Colombian project ISAGEN Solución Energética Piloto La Guajira. J. Barreiro-Gomez gratefully acknowledges support from U.S. Air Force Office of Scientific Research under grant number FA9550-17-1-0259.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego, Bernardo
All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller's design to prevent a possibly severe deterioration of the system's performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Adrián Ruiz is also supported by Formació Personal Investigador a la Universitat Politècnica de Catalunya under an FPI-UPC 2018 grant (ref. 20 FPI-UPC 2018). Damiano Rotondo is also supported by Juan de la Cierva - Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection of replay attacks in cyber-physical systems using a frequency-based signature

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Saludes, Jordi
  • Quevedo, Joseba
This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic health-aware LPV-MPC based on system reliability assessment for water transport network

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a health-aware control approach for drinking water transport networks. This approach is based on an economic model predictive control (MPC) that considers an additional goal with the aim of extending the components and system reliability. The components and system reliability are incorporated into the MPC model using a Linear Parameter Varying (LPV) modeling approach. The MPC controller uses additionally an economic objective function that determines the optimal filling/emptying sequence of the tanks considering that electricity price varies between day and night and that the demand also follows a 24-h repetitive pattern. The proposed LPV-MPC control approach allows considering the model nonlinearities by embedding them in the parameters. The values of these varying parameters are updated at each iteration taking into account the new values of the scheduling variables. In this way, the optimization problem associated with the MPC problem is solved by means of Quadratic Programming (QP) to avoid the use of nonlinear programming. This iterative approach reduces the computational load compared to the solution of a nonlinear optimization problem. A case study based on the Barcelona water transport network is used for assessing the proposed approach performance., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FD-ZKF: A Zonotopic Kalman Filter optimizing fault detection rather than state estimation

  • Pourasghar, Masoud
  • Combastel, Christophe
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Enhancing the sensitivity to faults with respect to disturbances, rather than optimizing the precision of the state estimation using Kalman Filters (KF) is the subject of this paper. The stochastic paradigm (KF) is based on minimizing the trace of the state estimation error covariance. In the context of the bounded-error paradigm using Zonotopic Kalman Filters (ZKF), this is analog to minimize the covariation trace. From this analogy and keeping a similar observer-based structure as in ZKF, a criterion jointly inspired by set-membership approaches and approximate decoupling techniques coming from parity-space residual generation is proposed. Its on-line maximization provides an optimal time-varying observer gain leading to the so-called FD-ZKF filter that allows enhancing the fault detection properties. The characterization of minimum detectable fault magnitude is done based on a sensitivity analysis. The effect of the uncertainty is addressed using a set-membership approach and a zonotopic representation reducing set operations to simple matrix calculations. A case study based on a quadruple-tank system is used both to illustrate and compare the effectiveness of the results obtained from the FD-ZKF approach compared to a pure ZKF approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group Grant (2017 SGR 482) and by Agència de Gestió d’Ajuts Universitaris i de Recerca. Furthermore, the authors would like to thank Prof. A. Zolghadri for insightful discussions on ZKF extensions and applications within SysNum cluster activities (Idex Bordeaux, France).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer versus set-membership approaches for fault detection in uncertain systems using zonotopes

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper presents both analysis and comparison of the interval observer–based and set-membership approaches for the state estimation and fault detection (FD) in uncertain linear systems. The considered approaches assume that both state disturbance and measurement noise are modeled in a deterministic context following the unknown but bounded approach. The propagation of uncertainty in the state estimation is bounded through a zonotopic set representation. Both approaches have been mathematically related and compared when used for state estimation and FD. A case study based on a two-tanks system is employed for showing the relationship between both approaches while comparing their performance., Spanish State Research Agency (AEI)through the María de Maeztu Seal ofExcellence to IRI, Grant/Award Number:MDM-2016-0656; European RegionalDevelopment Fund (ERFD); DEOCS,Grant/Award Number: MINECO DPI2016-76493; SCAV, Grant/AwardNumber: MINECO DPI2017-88403-R;AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems(SAC) group, Grant/Award Number: 2017SGR 482; Agència de Gestió d'AjutsUniversitaris i de Recerca
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Model predictive control and moving horizon estimation for water level regulation in inland waterways

  • Segovia Castillo, Pablo
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Duviella, Eric
  • Puig, Vicenç
This work regards the design of optimization techniques for the purposes of state estimation and control in the framework of inland waterways, often characterized by negligible bottom slopes and large time delays. The derived control-oriented model allows these issues to be handled in a suitable manner. Then, the analogous moving horizon estimation and model predictive control techniques are applied in a centralized manner to estimate the unmeasurable states and fulfill the operational goals, respectively. Finally, the performance of the methodology is tested in simulation by means of a realistic case study based on part of the inland waterways in the north of France. The results show that the proposed methodology is able to guarantee the navigability condition, as well as the other operational goals., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal sizing of storage elements for a vehicle based on fuel cells, supercapacitors, and batteries

  • Sampietro, José Luis
  • Puig, Vicenç
  • Costa Castelló, Ramon
To achieve a vehicle-efficient energy management system, an architecture composed of a PEM fuel cell as the main energy source and a hybrid storage system based on battery banks and supercapacitors is proposed. This paper introduces a methodology for the optimal component sizing aiming at minimizing the total cost, achieving a cheaper system that can achieve the requirements of the speed profiles. The chosen vehicle is an urban transport bus, which must meet the Buenos Aires Driving Cycle, and the Manhattan Driving Cycle. The combination of batteries and supercapacitors allows a better response to the vehicle’s power demand, since it combines the high energy density of the batteries with the high power density of the supercapacitors, allowing the best absorption of energy coming from braking. In this way, we address the rapid changes in power without reducing the global efficiency of the system. Optimum use of storage systems and fuel cell is analyzed through dynamic programming., This work has been partially funded by the Spanish national projects MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and SCAV (ref. DPI2017-88403-R MINECO/FEDER). This work is supported by the Spanish State Research Agencythrough the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: Application to UAV disturbance estimation

  • Cayero, Julián
  • Rotondo, Damiano
  • Morcego, Bernardo
  • Puig, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT DEOCS and SCAV (refs. MINECO DPI2016-76493, DPI2017-88403-R). It has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by AGAUR and the Spanish Research Agency through the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656). Julian Cayero is also supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, the European Social Fund (ESF) and the Agency for Management of University and Research Grants (AGAUR) under an FI-DGR grant (ref. 2016FI_B1 00024). Damiano Rotondo is also supported by a Juan de la Cierva-Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust economic model predictive control based on a periodicity constraint

  • Wang, Ye
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes robust economic model predictive control based on a periodicity constraint for linear systems subject to unknown-but-bounded additive disturbances. In this economic MPC design, a periodic steady-state trajectory is not required and thus assumed unknown, which precludes the use of enforcing terminal state constraints as in other standard economic formulations. Instead, based on the desired periodicity of system operation, we optimize the economic performance over a set of periodic trajectories that include the current state. To achieve robust constraint satisfaction, we use a tube-based technique in the economic MPC formulation. The mismatches between the nominal model and the closed-loop system with perturbations are limited using a local control law. With the proposed robust tube-based strategy, recursive feasibility is guaranteed. Moreover, under a convexity assumption, the closed-loop convergence of the closed-loop system is analyzed, and an optimality certificate is provided to check if the closed-loop trajectory reaches a neighborhood of the optimal nominal periodic steady trajectory using Karush-Kuhn-Tucker optimality conditions. Finally, through numerical examples, we show the effectiveness of the proposed approach., This work was supported in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through projects DEOCS (DPI2016‐76493‐C3) and SCAV (DPI2017‐88403‐R), the FPI grant (BES‐2014‐068319), and in part by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group under grant (2017‐SGR‐482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault and icing diagnosis in unmanned aerial vehicles using LPV interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval unknown input observer for the robust fault diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs) described by an uncertain model. The proposed interval observer evaluates the set of values for the state, which are compatible with the nominal fault-free and icing-free operation and can be designed in such a way that some information about the nature of the unknown inputs affecting the system can be obtained, thus allowing the diagnosis to be performed. The proposed strategy has several advantages. First, the LPV paradigm allows taking into account operating point variations. Second, the noise rejection properties are enhanced by the presence of the integral term. Third, the interval estimation property guarantees the absence of false alarms. Linear matrix inequality–based conditions for the analysis/design of these observers are provided in order to guarantee the interval estimation of the state and the boundedness of the estimation. The developed theory is supported by simulation results, obtained with the uncertain model of a Zagi Flying Wing UAV, which illustrate the strong appeal of the methodology for identifying correctly unexpected changes in the system dynamics due to actuator faults or icing., EEA Financial Mechanism by a grantfrom Iceland, Liechtenstein, and Norway;Universidad Complutense de Madrid,Grant/Award Number:006-ABEL-IM-2014B; Spanish StateResearch Agency (AEI) and the EuropeanRegional Development Fund (ERFD),Grant/Award Numbers: CICYT DEOCSDPI2016-76493 and CICYT SCAVDPI2017-88403-R; DGR of the Generalitatde Catalunya, Grant/Award Number:2017/SGR/482; Spanish State ResearchAgency through the María de Maeztu Sealof Excellence to IRI, Grant/AwardNumber: MDM-2016-0656; Juan de laCierva Formación, Grant/Award Number:FJCI-2016-29019; Research Council ofNorway through the Centres of Excellencefunding scheme, Grant/Award Number:223254-AMOS; ERCIM Alain BensoussanFellowship programme
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zonotopic set-membership state estimation for discrete-time descriptor LPV systems

  • Wang, Ye
  • Wang, Zhenhua
  • Puig, Vicenç
  • Cembrano, Gabriela
This technical note proposes a novel set-membership state estimation approach based on zonotopes for discrete-time descriptor linear parameter-varying systems. The consistency test between the system model and measured outputs is implemented to construct a parameterized intersection zonotope with respect to a correction matrix. With a defined zonotope minimization criterion, we propose a novel offline optimization problem to obtain the optimal correction matrix. In addition, with the proposed approach, an adaptive bound of the radius of the intersection zonotope is also provided. Finally, a case study with a truck-trailer system is shown to illustrate the proposed approach., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. DPI2016-76493-C3-3-R) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319). Z. Wang was supported by National Natural Science Foundation of China (Grant No. 61273162, 61403104).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A communication-based distributed model predictive control approach for large-scale systems

  • Segovia Castillo, Pablo
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Duviella, Eric
  • Puig, Vicenç
Trabajo presentado en el 58th Conference on Decision and Control (CDC), celebrado en Niza (Francia), del 11 al 13 de diciembre de 2019, This work presents a distributed model predictive control strategy as an alternative to conventional centralized approaches, which often suffer from implementation issues when applied to large-scale systems. The overall system is partitioned into minimally coupled subsystems based on its structural properties. Then, the coordination among the subproblems is achieved by means of a communication protocol, which allows each local controller to broadcast its solution to the rest of controllers with a coupled variable. The proposed approach is tested on the quadruple-tank process, and its effectiveness is proved by comparing the obtained results to those documented in an existing benchmark., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R). It has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator and sensor fault estimation based on a proportional-integral quasi-LPV observer with inexact scheduling parameters

  • Gómez-Peñate, Samuel
  • López-Estrada, Francisco-Ronay
  • Valencia-Palomo, Guillermo
  • Rotondo, Damiano
Trabajo presentado en el 3rd IFAC Workshop on Linear Parameter-Varying Systems, celebrado en Eindhoven (Países Bajos), del 4 al 6 de noviembre de 2019, This paper presents a method for actuator and sensor fault estimation based on a proportional-integral observer (PIO) for a class of nonlinear system described by a polytopic quasi-linear parameter varying (qLPV) mathematical model. Contrarily to the traditional approach, which considers measurable or unmeasurable scheduling parameters, this work proposes a methodology that considers inexact scheduling parameters. This condition is present in many physical systems where the scheduling parameters can be affected by noise, offsets, calibration errors, and other factors that have a negative impact on the measurements. A H¿ performance criterion is considered in the design in order to guarantee robustness against sensor noise, disturbance, and inexact scheduling parameters. Then, a set of linear matrix inequalities (LMIs) is derived by the use of a quadratic Lyapunov function. The solution of the LMI guarantees asymptotic stability of the PIO. Finally, the performance and applicability of the proposed method are illustrated through a numerical experiment in a nonlinear system., This work is supported by Tecnologico Nacional de Mexico and the National Council of Science and Technology (CONACyT). The support is gratefully acknowledged. This work has been also partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An LMI-based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan, Adrián
  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Sarrate, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR through the contract FI-AGAUR (ref. 2017FI-B00285) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). This work has also been supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva—Formación (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust economic model predictive control for energy dispatch in smart micro-grids considering demand uncertainty

  • Nassourou, M.
  • Blesa, Joaquim
  • Puig, Vicenç
Trabajo presentado en el 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), celebrado en Zaragoza (España), del 10 al 13 de septiembre de 2019, This paper proposes a robust economic model predictive control method based on a bounded description of the demand uncertainty for optimal energy dispatch in a smart micro-grid. The proposed method considers the effect of uncertainty by tightening the system constraints along the prediction horizon. The bounds of the tightened constraints are computed offline. A periodic terminal state constraint is included in order to guarantee stability. The proposed method is simpler and faster than closed-loop min-max based approaches. The proposed approach is assessed with the help of a smart-grid consisting of some photovoltaic (PV) panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices interconnected via two DC-buses, from which load demands can draw required energy. Load demands are uncertain, but considered as bounded., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). J. Blesa acknowledges the support from the Serra Húnter program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Set-based replay attack detection in closed-loop systems using a plug & play watermarking approach

  • Trapiello Fernández, Carlos
  • Puig, Vicenç
Trabajo presentado en la 4th Conference on Control and Fault Tolerant Systems (SysTol), celebrada en Casablanca (Marruecos), del 18 al 20 de septiembre de 2019, This paper presents a watermarking signal injection method that compensates its effect in the loop, avoiding thus the signal reinjection. Similar to a virtual actuator scheme, the proposed methodology masks the presence of the authentication signal to the system controller, that do not need to be retuned as it remains immunized. Furthermore, a set-based analysis concerning the effect that the performance loss imposed by a watermarking signal has in the detectability of a replay attack is performed for the stationary, assuming that a standard state observer is used in order to monitor the plant. Finally, a numerical application example is used to illustrate the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493) and AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State observer design for quadratic parameter varying (QPV) systems

  • Rotondo, Damiano
  • Arne Johansen, Tor
Trabajo presentado en el 18th European Control Conference (ECC), celebrado en Nápoles (Italia), del 25 al 28 de junio de 2019, This paper addresses the problem of state observation in quadratic parameter varying (QPV) systems. In particular, a state observer is designed in such a way that the estimation error converges to zero with a desired rate of convergence in a given polytopic region of the error space. Under some assumptions, it is shown that design conditions can be given in the form of a set of bilinear matrix inequalities (BMIs), which can be reduced to linear matrix inequalities (LMIs), which are computationally more tractable. The main characteristics of the proposed approach are illustrated by means of an example, which confirms the validity of the theoretical results., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019), and by the Research Council of Norway through the AMOS Center, grant number 223254.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tilt angle optimization of photovoltaic panels

  • Dogaheh, Z. Rasouli
  • Puig, Vicenç
Trabajo presentado en el 6th International Conference on Control, Decision and Information Technologies (CoDIT), celebrado en París (Francia), del 23 al 26 de abril de 2019, The solar PV power sector in Spain has been developing at a spectacular rate in recent years. The energy cost and the dependence on fossil fuels can be reduced by improving the efficiency of photovoltaic energy production. The performance of a solar radiation conversion system is affected by a tilt angle with the horizontal plane. Thus, the photovoltaic array needs to be tilted at the correct angle to maximize the performance of the system. In this paper, we found the optimum tilt angle and applied for Barcelona, Spain, located at latitude 41o 22' 56'' North and longitude 2o 6'56'' East. The optimal tilt angle for Winter (December, January, February) is 56.46 and the optimum tilt angle for Spring (March, April, May Ls 2 .11¿and the optimum tilt angle for Summer(Jun, July, August Ls 13.76¿ and the optimum tilt angle for Autumn (September, 2ctober, November Ls 8.1 ¿. finally, the annual optimum tilt angle for our latitude Ls 36.87¿, ZLth thLs optimal slope angle, maximum monthly and annual solar radiation is calculated. In this way, we can increase the energy generation when achieved to maximum solar radiation. With this process, we were able to increase 10.54% of energy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R).This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Observer design for Takagi-Sugeno Lipschitz systems affected by disturbances using quadratic boundedness

  • Yang, Ruicong
  • Rotondo, Damiano
  • Puig, Vicenç
Trabajo presentado en la International Conference on Control, Automation and Diagnosis (ICCAD), celebrada en Grenoble (Francia), del 2 al 4 de julio de 2019, In this paper, a proportional observer design using quadratic boundedness is proposed in order to estimate the state of a system described by a Takagi-Sugeno model with a Lipschitz nonlinearity term, and affected by unknown disturbances. The conditions for ensuring that the error between the real and the estimated state converge within an ellipsoidal region about zero, are provided in the form of a linear matrix inequality (LMI) formulation. Then, the simulation results of this approach applied to a four-wheeled omni-directional mobile robot will be shown., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva - Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Time evolution pattern analysis for cyber attack detection in a two-tank benchmark

  • Quevedo, Josebac
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
Trabajo presentado en el 8th International Conference on Systems and Control (ICSC), celebrado en Marrakech (Marruecos), del 23 al 25 de octubre de 2019, This paper presents some results related to the detection and isolation of cyber attacks in a recently proposed benchmark based on a two-tank system. The benchmark proposes some attack scenarios in which a malicious attacker alters the signals of the water level sensors in the tanks, in order to remain hidden while stealing water. This paper shows the difficulty to detect cyber attacks based only on the model-based residuals calculated using the measured variables. On the other hand, by using the time evolution pattern analysis of the measured sensors, it becomes possible to detect some of these cyber attacks., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

  • López-Estrada, Francisco-Ronay
  • Rotondo, Damiano
  • Valencia-Palomo, Guillermo
This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC)., This work has been supported by Tecnológico Nacional de México grants 6723.18-P and 5400.19-P, the Instituto de Ciencia Tecnológia e Innovación, Chiapas (ICTIECH) 1123/2019. This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterisation of interval-observer fault detection and isolation properties using the set-invariance approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
The aim of this paper is to provide a robust Fault Detection and Isolation (FDI) approach that combines the set-invariance approach with a zonotopic interval observer. The effect of the uncertainty is taken into account considering zonotopic-set representations in both the transient and steady states. The set-invariance approach is used to characterize the fault detectability and isolability properties in the steady-state operation of the system. In particular, the Minimum Detectable Fault (MDF) and the Minimum Isolable Fault (MIF) are characterized for several type of faults in separate formulations utilizing the integration of classical sensitivity analysis and set-invariance approaches. Finally, a simulation example based on a two-tanks system is employed to both illustrate and discuss the effectiveness of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by Agència de Gestió d’Ajuts Universitaris i de Recerca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On robust interval observer design for uncertain systems subject to both time-invariant and time-varying uncertainties

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes the design of an interval observer-based approach for linear dynamic systems affected by both time-invariant and time-varying uncertainties. First, different interval observer schemes are compared and analysed when dealing with the different types of uncertainties. Then, an integrated interval observer is proposed in order to overcome the drawbacks of using the set-based approach, i.e. the non-preservation of the parameter uncertainty time dependency and the wrapping effect. Furthermore, H∞ performance is considered in order to compute the observer gain by using an LMI technique. Finally, a numerical example and a real case study based on a two-tank system are employed for both illustrating and analysing the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project SCAV (ref. MINECO DPI2017-88403-R) and by Agència de Gestió d'Ajuts Universitaris i de Recerca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic reliability-aware MPC-LPV for operational management of flow-based water networks including chance-constraints programming

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper presents an economic reliability-aware model predictive control (MPC) for the management of drinking water transport networks (DWNs). The proposed controller includes a new goal to increase the system and components reliability based on a finite horizon stochastic optimization problem with joint probabilistic (chance) constraints. The proposed approach is based on a single-layer economic optimization problem with dynamic constraints. The inclusion of components and system reliability in the MPC model using an Linear Parameter Varying (LPV) modeling approach aims to maximize the availability of the system by estimating system reliability. On the other hand, the use of a LPV-MPC control approach allows the controller to consider nonlinearities in the model in a linear like way. Moreover, the resulting MPC optimization problem can be formulated as a Quadratic Programming (QP) problem at each sampling time reducing the computational burden/time compared to solving a nonlinear programming problem. The use of chance-constraint programming allows the computation of an optimal strategy with a pre-established risk acceptability levels to cope with the uncertainty of the demand forecast. Finally, the proposed approach is applied to a part of the water transport network of Barcelona for demonstrating its performance. The obtained results show that the systemreliability of theDWNis maximized compared with the other approaches., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and also by EU INTERREG POCTEFA (2014-2020) EFA 153/16 SMART.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estimation of actuator and system faults via an unknown input interval observer for Takagi-Sugeno systems

  • Martínez-García, Citlaly
  • Puig, Vicenç
  • Astorga-Zaragoza, Carlos-M.
  • Madrigal-Espinosa, Guadalupe
  • Reyes-Reyes, Juan
This paper presents a simultaneous state variables and system and actuator fault estimation, based on an unknown input interval observer design for a discrete-time parametric uncertain Takagi-Sugeno system under actuator fault, with disturbances in the process and measurement noise. The observer design is synthesized by considering unknown but bounded process disturbances, output noise, as well as bounded parametric uncertainties. By taking into account these considerations, the upper and lower bounds of the considered faults are estimated. The gain of the unknown input interval observer is computed through a linear matrix inequalities (LMIs) approach using the robust H∞ criteria in order to ensure attenuation of process disturbances and output noise. The interval observer scheme is experimentally evaluated by estimating the upper and lower bounds of a torque load perturbation, a friction parameter and a fault in the input voltage of a permanent magnet DC motor., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and also by EU INTERREG POCTEFA (2014-2020) EFA 153/16 SMART.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Health-aware control design based on remaining useful life estimation for autonomous racing vehicle

  • Karimi Pour, Fatemeh
  • Theilliol, Didier
  • Puig, Vicenç
  • Cembrano, Gabriela
The accurate estimation of the State of Charge (SOC) and an acceptable prediction of the Remaining Useful Life (RUL) of batteries in autonomous vehicles are essential for safe and lifetime optimized operation. The estimation of the expected RUL is quite helpful to reduce maintenance cost, safety hazards, and operational downtime. This paper proposes an innovative health-aware control approach for autonomous racing vehicles to simultaneously control it to the driving limits and to follow the desired path based on maximization of the battery RUL. To deal with the non-linear behavior of the vehicle, a Linear Parameter Varying (LPV) model is developed. Based on this model, a robust controller is designed and synthesized by means of the Linear Matrix Inequality (LMI) approach, where the general objective is to maximize progress on the track subject to win racing and saving energy. The main contribution of the paper consists in preserving the lifetime of battery and optimizing a lap time to achieve the best path of a racing vehicle. The control design is divided into two layers with different time scale, path planner and controller. The first optimization problem is related to the path planner where the objective is to optimize the lap time and to maximize the battery RUL to obtain the best trajectory under the constraints of the circuit. The proposed approach is formulated as an optimal on-line robust LMI based Model Predictive Control (MPC) that steered from Lyapunov stability. The second part is focused on a controller gain synthesis solved by LPV based on Linear Quadratic Regulator (LPV-LQR) problem in LMI formulation with integral action for tracking the trajectory. The proposed approach is evaluated in simulation and results show the effectiveness of the proposed planner for optimizing the lap time and especially for maximizing the battery RUL., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust economic model predictive control based on a zonotope and local feedback controller for energy dispatch in smart-grids considering demand uncertainty

  • Nassourou, M.
  • Blesa, Joaquim
  • Puig, Vicenç
Electrical smart grids are complex MIMO systems whose operation can be noticeably affected by the presence of uncertainties such as load demand uncertainty. In this paper, based on a restricted representation of the demand uncertainty, we propose a robust economic model predictive control method that guarantees an optimal energy dispatch in a smart micro-grid. Load demands are uncertain, but viewed as bounded. The proposed method first decomposes control inputs into dependent and independent components, and then tackles the effect of demand uncertainty by tightening the system constraints as the uncertainty propagates along the prediction horizon using interval arithmetic and local state feedback control law. The tightened constraints’ upper and lower limits are computed off-line. The proposed method guarantees stability through a periodic terminal state constraint. The method is faster and simpler compared to other approaches based on Closed-loop min–max techniques. The applicability of the proposed approach is demonstrated using a smart micro-grid that comprises a wind generator, some photovoltaic (PV) panels, a diesel generator, a hydroelectric generator and some storage devices linked via two DC-buses, from which load demands can be adequately satisfied., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). J. Blesa acknowledges the support from the Serra Húnter program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault-Tolerant Control Based on Virtual Actuator and Sensor for Discrete-Time Descriptor Systems

  • Wang, Ye
  • Rotondo, Damiano
  • Puig, Vicenç
  • Cembrano, Gabriela
This article proposes a fault-tolerant control (FTC) strategy based on virtual actuator and sensor for discrete-time descriptor systems subject to actuator and sensor faults. The fault-tolerant closed-loop system, which includes the nominal controller and observer, as well as the virtual actuator and the virtual sensor, hides the effects of faults. When an observer-based state-feedback law is considered, the existence of algebraic loop may prevent the practical implementation due to the current algebraic states depending on the current control input, that affects also the implementation of the virtual actuator/sensor. To deal with this issue, an observer-based delayed feedback controller and a delayed virtual actuator are proposed for discrete-time descriptor systems. Furthermore, the satisfaction of the separation principle is shown, and an improved admissibility condition is developed for the design of the controller and virtual actuator/sensor. Finally, some simulation results including an electrical circuit are used to demonstrate the applicability of the proposed methods., This work was supported by the Fundamental Research Funds for the Central University under Grant 3072020CFJ040. This work was also partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R), by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482) and by SMART Project (ref. num. EFA153/16 Interreg Cooperation Program POCTEFA 2014-2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Economic reliability-aware MPC-LPV based on chance-constraints programming for water networks

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado en la European Control Conference (ECC), celebrada en San Petersburgo (Rusia), del 12 al 15 de mayo de 2020, This paper proposed an economic reliabilityaware model predictive control (MPC) for the management of drinking water transport networks (DWNs) that includes a new goal to increase the system and components reliability based on a finite horizon stochastic optimization problem with joint probabilistic (chance) constraints. The proposed approach is based on a single-layer economic optimization problem with dynamic constraints. The inclusion of components and system reliability in the MPC model using an LPV modelling approach aims at maximizing the availability of the system by estimating system reliability. The solution of the optimization problem related to the MPC problem is obtained by solving a series of Quadratic Programming (QP) problem. The use of chanceconstraint programming allows computing an optimal policy based on a desirable risk acceptability level and managing dynamically volume tank stocks to cope with non-stationary flow demands. Finally, the proposed approach is applied to a part of a real drinking water transport network of Barcelona for demonstrating the performance of the method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Process performance verification using viability theory

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
The development of efficient methods for process performance verification has drawn a lot of attention in the research community. Viability theory is a mathematical tool to identify the trajectories of a dynamical system which remains in a constraint set. In this paper, viability theory is investigated for this purpose in the case of nonlinear processes that can be represented in Linear Parameter Varying (LPV) form. In particular, verification algorithms based on the use of invariance and viability kernels and capture basin are proposed. The difficulty with the application of this theory is the computation of these sets. A Lagrangian method has been used to approximate these sets. Because of simplicity and efficient computations, zonotopes are adopted for set representation. Two new sets called Safe Work Area (SWA) and Required Performance (RP) are defined and an algorithm is proposed to use these concepts for the verification purpose. Finally, two application examples based on well-known case studies, a two-tank system and pH neutralization plant, are provided to show the effectiveness of the proposed method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017- 88403-R) and by EU INTERREG POCTEFA (2014-2020) EFA 153/16 SMART
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic model predictive control of nonlinear systems using a linear parameter varying approach

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This article proposes an economic model predictive control (EMPC) approach for linear parameter varying (LPV) systems. An efficient implementation of the associated MPC optimization problem is introduced based on transforming the LPV model into a linear time-varying one by using an estimation of the scheduling variables along the prediction horizon. This estimation is based on the optimal states/inputs determined from the solution of the previous optimization problem while running the receding horizon strategy. Using this approach, the solution of the proposed LPV-based EMPC scheme would be possible by solving a series of quadratic programming problems at each time instant. This approach allows reducing the computational burden compared with the solution of a nonlinear optimization problem that would result naturally from the LPV-based formulation. The stability of the proposed approach is guaranteed by forcing the terminal state to converge towards the optimal equilibrium/working point of the system. Moreover, the terminal constraint is relaxed by using a constraint set around the terminal state instead of a constraint value and adding a penalty on the terminal state into the cost function. Besides, strict dissipativity is established as a sufficient condition to prove stability. Finally, the effectiveness of the LPV-based EMPC strategy is shown by controlling a small-scale pasteurization system in simulation. The comparison between the proposed control approach and standard MPC approaches is performed. Results show the advantages of the proposed LPV-based EMPC controller in terms of economic cost minimization., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R).This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LMI-based design of state-feedback controllers for pole clustering of LPV systems in a union of DR-regions

  • Yang, Ruicong
  • Rotondo, Damiano
  • Puig, Vicenç
This paper introduces an approach for the design of a state-feedback controller that achieves pole clustering in a union of (Formula presented.) -regions for linear parameter varying systems. The design conditions, obtained using a partial pole placement theorem, are eventually expressed in terms of linear matrix inequalities. In addition, it is shown that the approach can be modified in a shifting sense. Hence, the controller gain is computed such that different values of the varying parameters imply different regions of the complex plane where the closed-loop poles are situated. This approach enables the online modification of the closed-loop performance. The effectiveness of the proposed method is demonstrated by means of simulations., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R), by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482) and by SMART Project (ref. num. EFA153/16 Interreg Cooperation Program POCTEFA 2014-2020).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

LPV lateral control for ADAS based on driver performance monitoring

  • Medero Borrell, Ariel|||0000-0002-1316-2506
  • Sename, Olivier
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents a lateral control Advanced Driver Assistance System for cars, which uses both steering control and differential braking commands to aid drivers and enhance vehicle safety. The proposed strategy uses a LPV PI Observer for the estimation of driver performance over a range of vehicle speeds. This estimation is then used as scheduling signals to activate / deactivate the ADAS actuators. The strategy is tested in simulation with randomly generated driver profiles to prove the adaptability to a diverse range of driver's behavior., This work is supported by the French National Research Agency in the framework of the ”Investissemnts d’avenir” program ANR-15- IDEX-02. This work has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R) and by FPI UPC grant 2020FPI-UPC-008., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

LPV-MPC control of autonomous vehicles

  • Alcalá Baselga, Eugenio|||0000-0002-6023-0014
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
In this work, a novel approach is presented to solve the trajectory tracking problem for autonomous vehicles. This method is based on the use of a cascade control where the external loop solves the position control using a novel Linear Parameter Varying - Model Predictive Control (LPV-MPC) approach and the internal loop is in charge of the dynamic control of the vehicle using a LPV - Linear Quadratic Regulator technique designed via Linear Matrix Inequalities (LPV-LMI-LQR). Both techniques use an LPV representation of the kinematic and dynamic models of the vehicle. The main contribution of the LPV-MPC technique is its ability to calculate solutions very close to those obtained by the non-linear version but reducing significantly the computational cost and allowing the real-time operation. To demonstrate the potential of the LPV-MPC, we propose a comparison between the non-linear MPC formulation (NL-MPC) and the LPV-MPC approach., This work has been partially funded by the Spanish Governmentand FEDER through the projects CICYT DEOCS and SCAV (refs.MINECO DPI2016-76493, DPI2017-88403-R). This work has alsobeen partially funded by AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems (SAC) group grant (2017SGR 482), and by AGAUR and the Spanish Research Agencythrough the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Detection of replay attacks in autonomous vehicles using a bank of QPV observers

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Escobet Canal, Teresa|||0000-0001-6090-1538
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper addresses the problem of replay attack detection in autonomous vehicles. Due to the strong presence of nonlinearities, traditional approaches based on linear approximations of the dynamics would not work effectively. For this reason, the proposed approach is based on a bank of quadratic parameter varying (QPV) observers, designed in such a way that each observer is insensitive to a replay attack that affects one specific sensor channel. This feature allows the development of a decision algorithm, whose effectiveness is validated by means of simulation results., This work was partially supported by the University of Stavanger through the project IN-12267. This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Water distribution network model calibration and continuous maintenance: Terrassa, a real application

  • Pérez Magrané, Ramon|||0000-0002-9216-4234
  • Cugueró Escofet, Josep|||0000-0002-7724-7808
  • Romera Formiguera, Juli
  • Eeckhout Alsinet, Joan van
  • Cabot, Jordi
  • Franch, Òscar
The WDN model calibration has been and it still is a research area of interest [1]. This process has been well studied and the different steps required were already established. The availability of more and more data encourages the idea of applying these methodologies since the more the state of the system is known the better the estimations will be. Nevertheless, the application of all the academic proposals and experiences in real networks involve some major handicaps. First of all, the data validation and reconstruction before using them for the model calibration and for the model use afterwards. There are some automatic tools for calibration but they focus on the last step of the process when the parameters have to be tuned. Some previous steps that require an ad hoc solution. These issues represent a gap between academia and real practice. This paper presents a successful experience carried out with the collaboration of the municipal water company of Terrassa (TAIGUA) with a research group located in the same city with a long experience in water research. The objective of the project is to improve the existing models, establish their potentials and propose strategies for their final adjustment. The results are different depending on the availability of data. The district metered areas (DMA) presented have different characteristics and are representative of interesting situations for other practitioners. The models that result will allow a better management of the network including energy optimization, leak detection and localization and quality supervision., This work has been partially funded by TAIGUA through the collaboration project with cs2ac (ref. UPC C-11660) and data have been kindly provided by TAIGUA and by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

State-feedback and static-output-feedback parametric controllers based on a discrete-time LPV grid based approach

  • Medero Borrell, Ariel|||0000-0002-1316-2506
  • Sename, Olivier
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This work presents a two-step LMI-based approach for the synthesis of State-Feedback and Static-Output-Feedback controllers for discrete-time Linear Parameter Varying systems. The benefit of the proposed approach lies on the fact that the two-step LMI method allows to enforce a common parametric structure on the controller for all the parameter space. This results in a final controller implementation that does not requires any interpolation step and thus, is of easy implementation. An illustrative example is given for an autonomous vehicle steering control design case., This work is supported by the French National Research Agency in the framework of the ”Investissemnts d'avenir” program ANR-15-IDEX-02. This work has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R) and by FPI UPC grant 2020FPI-UPC-008., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quadrotor path following and reactive obstacle avoidance with deep reinforcement learning

  • Rubí Perelló, Bartomeu|||0000-0002-8822-2681
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
A deep reinforcement learning approach for solving the quadrotor path following and obstacle avoidance problem is proposed in this paper. The problem is solved with two agents: one for the path following task and another one for the obstacle avoidance task. A novel structure is proposed, where the action computed by the obstacle avoidance agent becomes the state of the path following agent. Compared to traditional deep reinforcement learning approaches, the proposed method allows to interpret the training process outcomes, is faster and can be safely trained on the real quadrotor. Both agents implement the Deep Deterministic Policy Gradient algorithm. The path following agent was developed in a previous work. The obstacle avoidance agent uses the information provided by a low-cost LIDAR to detect obstacles around the vehicle. Since LIDAR has a narrow field-of-view, an approach for providing the agent with a memory of the previously seen obstacles is developed. A detailed description of the process of defining the state vector, the reward function and the action of this agent is given. The agents are programmed in python/tensorflow and are trained and tested in the RotorS/gazebo platform. Simulations results prove the validity of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT (ref. DPI2017-88403-R)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Detection of replay attacks in CPSs using observer-based signature compensation

  • Trapiello Fernández, Carlos|||0000-0001-7806-8679
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Sánchez Corrales, Helem Sabina
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a replay attack detection method that addresses the performance loss of watermarking-based approaches. The proposed method injects a sinusoidal signal that affects a subset, chosen at random, of the system outputs. The presence of the signal in each one of the outputs is estimated by means of independent observers and its effect is compensated in the control loop. When a system output is affected by a replay attack, the loss of feedback of the associated observer destabilizes the signal estimation, leading to an exponential increase of the estimation error up to a threshold, above which the estimated signal compensation in the control loop is disabled. This event triggers the detection of a replay attack over the output corresponding to the disrupted observer. The effectiveness of the method is demonstrated using results obtained with a quadruple-tank system simulator., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

La importancia y el alcance de los ciberataques sobre los sistemas de supervisión y control automático

  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Escobet Canal, Teresa|||0000-0001-6090-1538
El aumento de la conectividad de los sistemas de supervisión y de control automático de mediante el uso de Internet conlleva unos beneficios innegables pero a la vez abre la posibilidad a nuevos problemas (los ciberataques). La necesidad de mejorar la seguridad está suponiendo cada día cada vez más en el mundo científico-técnico. De hecho, si se analiza la bibliografía sobre contribuciones en el tema de ciberataques, según Scopus, se observa una curva exponencial ya que hemos pasado de 69 contribuciones científicas el año 2000 a casi 3000 el año 2019. Así pues, indudablemente este tema está siendo ya de gran actualidad y se vislumbra que lo será aún más en un futuro próximo para que los sistemas de supervisión y control automático sean fiables y seguros ante los crecientes intentos de ciberataques., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sensor-data-driven prognosis approach of liquefied natural gas satellite plant

  • Escobet Canal, Antoni|||0000-0001-5971-3396
  • Escobet Canal, Teresa|||0000-0001-6090-1538
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Molina, Adoración
This paper proposes a sensor-data-driven prognosis approach for the predictive maintenance of a liquefied natural gas (LNG) satellite plant. By using data analytics of sensors installed in the satellite plants, it is possible to predict the remaining time to refill the tank of the remote plants. In the proposed approach, the first task of data validation and correction is presented in order to transform raw data into reliable validated data. Then, the second task presents two methods for the prognosis of gas consumption in real time and the forecast of remaining time to refill the tank of the plant. The obtained results with real satellite plants showed good performance for direct implementation in a predictive maintenance plan., This work was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through projects SCAV (ref. DPI2017-88403-R), and by AGAUR ACCIO RIS3CAT UTILITIES 4.0–P1 ACTIV 4.0. ref. COMRDI-16-1-0054-03 and SMART Project (ref no EFA153/16 Interreg Cooperation Program POCTEFA 2014- 2020)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Optimal batch scheduling of a multiproduct dairy process using a combined optimization/constraint programming approach

  • Escobet Canal, Teresa|||0000-0001-6090-1538
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Palà Schönwälder, Pere|||0000-0002-9096-4596
  • Romera Formiguera, Juli
  • Adelman, Winfried
This paper presents the optimal batch scheduling of a multi-product dairy process using an approach that combines optimization and constraint programming techniques. A suitable model describing the subprocesses and production rules is developed allowing to obtain scheduling constraints relating the production process and the machines available together with their relative efficiencies. After the scheduling problem has been formulated, the batch scheduling of a real powder milk/yogurt process is obtained in an optimal manner using the proposed approach with the objective of meeting customers’ deadlines considering the efficiencies/costs of available alternative machines. Results using real consumer orders on some representative scenarios corresponding to the dairy production plant used as a case study are provided. This application shows a formulation closer to the engineering problem description thanks to the constraint-based language that facilitates the adaptation of the optimization objectives and constraints to real applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Economic reliability-aware MPC-LPV based on chance-constraints programming for water networks *

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
This paper proposed an economic reliabilityaware model predictive control (MPC) for the management of drinking water transport networks (DWNs) that includes a new goal to increase the system and components reliability based on a finite horizon stochastic optimization problem with joint probabilistic (chance) constraints. The proposed approach is based on a single-layer economic optimization problem with dynamic constraints. The inclusion of components and system reliability in the MPC model using an LPV modelling approach aims at maximizing the availability of the system by estimating system reliability. The solution of the optimization problem related to the MPC problem is obtained by solving a series of Quadratic Programming (QP) problem. The use of chance-constraint programming allows computing an optimal policy based on a desirable risk acceptability level and managing dynamically volume tank stocks to cope with non-stationary flow demands. Finally, the proposed approach is applied to a part of a real drinking water transport network of Barcelona for demonstrating the performance of the method., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A project-oriented course on guidance and control of autonomous aerial vehicles

  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Trapiello Fernández, Carlos|||0000-0001-7806-8679
In this paper, a project oriented course on guidance and control of autonomous aerial vehicles (UAVs) is presented. The paper describes the di erent modules of the course and how they are addressed using the project oriented approach. The project uses a quadrotor UAV that is used as the case study during the course. In this course, the students learn how to mathematically model quadrotor UAV fight characteristics, develop feedback control algorithms to enable stable flight control and fuse sensor measurements using Kalman lter techniques to estimate the UAV position and orientation. Students develop these concepts through both simulation and interaction with UAV real measurements. Throughout the course, students build a full 6-degree-of-freedom simulation of controlled quadrotor UAV ight using MATLAB and Simulink., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R) and and by SMART Project (ref. num. EFA153/16 Interreg Cooperation Program POCTEFA 2014-2020)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Health-aware LPV model predictive control of wind turbines

  • Khoury, Boutrous
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
Wind turbine components are subject to considerable stress and fatigue due to extreme environmental conditions to which they are exposed to, especially when located offshore. Interest in the integration of control with system health monitoring has increased in recent years. The integration of a health management module with model predictive control (MPC) provides the wind turbine a mechanism to operate safely and optimize the trade-off between components’ life and energy production. In this paper, a health-aware LPV model predictive control approach for wind turbines is proposed. The proposed controller establishes a trade-off between the economic objective based on maximizing the energy production but at the same time taking into account the minimization of accumulated stress on the wind turbine blades. The controller uses an LPV model for dealing with the non-linearity of the wind turbine model and the inclusion of the stress model. The proposed approach is tested on a well-known wind turbine case., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403- R) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Position-heading quadrotor control using LPV techniques

  • Trapiello Fernández, Carlos|||0000-0001-7806-8679
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
This work presents a solution for the position-heading control problem of a small quadrotor. The main idea of this paper is to exploit the advantages of the Linear Parameter Varying (LPV) control approach, together with a feedback linearization approach, for designing a cascade control structure without the need to perform simplifications with respect to the reference dynamic model used in the literature. The use of a LPV representation of the attitude subsystem allows to consider it as independent from the position one, leading to a well known cascade control structure. For the inner attitude control loop, the proposed qLPV-LQR controller and Proportional-Integral Observer (PIO) are solved in an optimal manner by solving a set of Linear Matrix Inequalities (LMIs). While for the outer position control loop, a feedback linearization approach is developed before designing the corresponding controller and PI-Observer also minimizing the LQR problem by means of LMIs. Furthermore, another outer loop, interchangeable with the position one, such that controls the velocities in the Body frame is proposed. This velocities controller is also solved in an optimal manner using a combination of feedback linearization and LPV techniques. The proposed solutions are applied to an AscTec Hummingbird UAV in simulation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Deep reinforcement learning for quadrotor path following with adaptive velocity

  • Rubí Perelló, Bartomeu|||0000-0002-8822-2681
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
This paper proposes a solution for the path following problem of a quadrotor vehicle based on deep reinforcement learning theory. Three different approaches implementing the Deep Deterministic Policy Gradient algorithm are presented. Each approach emerges as an improved version of the preceding one. The first approach uses only instantaneous information of the path for solving the problem. The second approach includes a structure that allows the agent to anticipate to the curves. The third agent is capable to compute the optimal velocity according to the path’s shape. A training framework that combines the tensorflow-python environment with Gazebo-ROS using the RotorS simulator is built. The three agents are tested in RotorS and experimentally with the Asctec Hummingbird quadrotor. Experimental results prove the validity of the agents, which are able to achieve a generalized solution for the path following problem., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERDF) through the SCAV Project (Ref. MINECO DPI2017-88403-R), and by SMART Project (Ref. EFA 153/16 Interreg Cooperation Program POCTEFA 2014-2020). Bartomeu Rubí is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI Grant (Ref. 2017FI_B_00212)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault detection and diagnostics in ventilation units using linear regression virtual sensors

  • Giovanni Mattera, Claudio
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Escobet Canal, Teresa|||0000-0001-6090-1538
  • Reza Shaker, Hamir
  • Jradi, Muhyiddine
Buildings represent a significant portion of global energy consumption. Ventilation units are one of the largest components in buildings systems and are responsible for large part of energy consumption. Ventilation units are complex components, often customized for the specific building. Their faults impact buildings' energy efficiency and occupancy comfort. In order to ensure their correct operation, proper Fault Detection and Diagnostics methods must be applied. Hardware redundancy, an effective approach to detect faults, leads to increased costs and space requirements. We propose to exploit physical relations inside the unit to create virtual sensors from other sensors' readings, introducing redundancy in the system. We create linear regression models for three sensors using other sensors related through physical laws as inputs. We use two different measures to detect when a virtual sensor deviates from the actual one: coefficient of determination and acceptable range. We test our method on a real building at the University of Southern Denmark. Our method detects a fault in temperature sensor, where its readings have an abnormal trend and fall outside acceptable ranae for one day.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Economic MPC-LPV control for the operational management of water distribution networks

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
This paper presents an Economic Model Predictive Control (EMPC) for the operational management of water distribution networks (WDNs) with periodic operation based on embedding the nonlinearity of the model to the Linear Parameter Varying (LPV) model of WDNs. The performance of the WDN is identified by a set of difference-algebraic equations while the relation of hydraulic head/pressure and flow in connected pipes is nonlinear. In particular, the WDN model consists of two sections of nonlinear algebraic equations for bidirectional and unidirectional flows in pipes, respectively. The proposed algorithm is embedded the nonlinear algebraic equations into the LPV model. The proposed control approach allows the controller to accommodate the scheduling parameters. By computing the prediction of the state variables along a prediction time horizon, the system model can be modified according to the evaluation of the estimated state at each time instant. This iterative approach improves the implementation efficiency and reduces the computational burden compared to the solution of a non-linear optimization problem. Finally, the proposed strategy is applied to a well-known benchmark of the Richmond WDN., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A deep reinforcement learning approach for path following on a quadrotor

  • Rubí Perelló, Bartomeu|||0000-0002-8822-2681
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes the Deep Deterministic Policy Grandient (DDPG) reinforcement learning algorithm to solve the path following problem in a quadrotor vehicle. This agent is implemented using a separated control and guidance structure with an autopilot tracking the attitude and velocity commands. The DDPG agent is implemented in python and it is trained and tested in the RotorS-Gazebo environment, a realistic multirotor simulator integrated in ROS. Performance is compared with Adaptive NLGL, a geometric algorithm that implements an equivalent control structure. Results show how the DDPG agent is able to outperform the Adaptive NLGL approach while reducing its complexity., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERDF) through the SCAV project (ref. MINECO DPI2017-88403-R), and by SMART project (ref. EFA 153/16 Interreg Cooperation Program POCTEFA 2014- 2020). Bartomeu Rubí is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI grant (ref. 2017FI B 00212)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Frequency-based detection of replay attacks: application to a quadrotor UAV

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Lopez Vidal, Marc
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unmanned aerial vehicles (UAVs) are reported to be highly exposed as possible targets of cyber attacks, due to their strong strategic and economic value, and their increasing use in a wide range of operations. Among the most critical cyber attacks, replay attacks are performed by replacing the real data coming from the sensors with previously recorded data. In this way, the attacker may provoke performance degradation, cause instability, and allow to perform undetectable physical attacks. The main contribution of this paper is to investigate the applicability of a frequency-based detection method, which uses a sine wave with time-varying frequency as authentication signal, to a UAV affected by replay attacks. The effectiveness of the method is illustrated through simulation scenarios., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: application to UAV disturbance estimation

  • Cayero Becerra, Julián Francisco
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reconfigurability analysis of multirotor UAVs under actuator faults

  • Sanjuan Gómez, Adrián
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Sarrate Estruch, Ramon|||0000-0002-9979-5899
This paper presents a reconfigurability analysis for different multirotor structures. The aim is to determine whether the multirotor is able to continue the mission without losing its controllability when faults occur in its actuators. The classical controllability condition is not enough in these systems. Hence two complementary methodologies have been developed to analyse the controllability of the multirotors: Analysis of the Static Reconfiguration Module (ASRM) and Attainable Control Set (ACS)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

  • Ruiz Royo, Adrián|||0000-0002-0387-4235
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller’s design to prevent a possibly severe deterioration of the system’s performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Adaptive nonlinear guidance law using neural networks applied to a quadrotor

  • Rubí Perelló, Bartomeu|||0000-0002-8822-2681
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
© 2019IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The NonLinear Guidance Law (NLGL) is a geometric algorithm commonly employed to solve the path following problem on different unmanned vehicles. NLGL is simple (does no depend on the model of the vehicle), effective and has only one tunning parameter. Its control parameter (L) depends on various factors, such as the velocity of the vehicle, the shape of the reference path and the dynamics of the vehicle. This paper analyses the effect of parameter L on the performance of NLGL when it is applied to a quadrotor vehicle. An Adaptive NLGL, which includes a velocity reduction term, is proposed. Stability proofs are given. Simulation results show that the proposed algorithm enhances the performance of the standard NLGL. Furthermore, it has no parameters to tune., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Health-aware LPV-MPC based on system reliability assessment for drinking water networks

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Cembrano Gennari, Gabriela|||0000-0003-1436-6022
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a health-aware model predictive control (MPC) for drinking water networks that includes an additional goal to extend the components and system reliability. The components and system reliability are incorporated in the MPC model as an extra parameter varying equation that considers the control action as a scheduling variable. The main goal of this work is to exhibit the advantage of taking into account system and component reliability, computed on-line by means of an LPV-MPC algorithm through an instance dedicated to DWNs. The proposed control approach allows the controller to accommodate to the parameter changes. By computing an estimation of the state variables during prediction, the MPC model can be modified considering the estimated state evolution at each time instant. Moreover, the solution of the optimization problem associate to the MPC problem is achieved by solving a series of Quadratic Programs (QP) at each sampling time. A small part of a real water network is used as a case study for illustrating the performance of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An LMI–based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan Gómez, Adrián
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Sarrate Estruch, Ramon|||0000-0002-9979-5899
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Shifting H infinity linear parameter varying state-feedback controllers subject to time-varying input saturations

  • Ruiz Royo, Adrián|||0000-0002-0387-4235
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
This paper establishes a methodology based on linear matrix inequalities (LMIs) to design a shifting H infinity linear parameter varying (LPV) state-feedback controller for systems affected by time-varying input saturations. By means of the shifting paradigm, the instantaneous saturation values are linked to a scheduling parameter vector. Then, the disturbance rejection is dealt with the quadratic boundedness concept and the shifting H infinity methodology. The design conditions are obtained within the LPV framework using ellipsoidal invariant sets, thus obtaining an LMI-based feasibility problem that can be solved via available solvers. Finally, the main characteristics of the proposed approach are validated by means of an illustrative example., This work has been partially funded by the Spanish State Re-search Agency (AEI) and the European Regional Development Fund(ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R) and the SMART project (ref. nºEFA 153/16 Interreg Coop-eration Program POCTEFA 2014-2020). This work has also beenpartially funded by AGAUR of Generalitat de Catalunya throughthe Advanced Control Systems (SAC) group grant (2017 SGR 482)and by the Spanish State Research Agency through the Maria deMaeztu Seal of Excellence to IRI (MDM-2016-0656). A. Ruiz isalso supported by Formaci ́o Personal Investigador a la UniversitatPolit`ecnica de Catalunya under an FPI-UPC 2018 grant (ref. 20 FPI-UPC 2018). D. Rotondo has been also supported by AEI through theJuan de la Cierva - Formacion grant (FJCI-2016-29019) and by theUniversity of Stavanger through the project IN-12267, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling daily water consumption through potential curves. Disaggregating apparent and real losses

  • Grau Torrent, Sergi|||0000-0003-1192-1430
  • Pérez Magrané, Ramon|||0000-0002-9216-4234
This is an Accepted Manuscript of an article published by Taylor & Francis in Urban Water Journal on 18 May 2020, available online: http://www.tandfonline.com/10.1080/1573062X.2020.1764594, This paper presents a model, based on potential curves, that describes the behaviour of the inverse of the daily cumulated frequency of the flows provided to a District Metered Area (DMA). The model has two terms, the first corresponds to the variable consumption due to the aggregation of demand patterns of consumers. The evolution of this term presents periodic behaviours with annual and weekly frequency. An extreme drought episode that affected Catalunya, reduced this parameter 19%. A second term presents exponential behaviour in its evolution and includes the real leakage. The leakage disaggregation together with the billing information allows the estimation of the apparent loses, 14.89% in the case study. The difficulty of estimating the parameters in a potential model, a complex problem of optimization, is simplified by applying mathematical moments. Hence, daily parameters become a linear relation of the daily moments that allows their algebraic operation., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493) and AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P4 MODEM. Data have been gently provided by the company Aigües de Manresa., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Model-based prognosis approach using a zonotopic Kalman filter with application to a wind turbine

  • Khoury, Boutrous
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
Khoury Boutros et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited., Wind turbines generally operate under adverse conditions making them prone to relatively high failure rates. Due to the direct exposure of the blades to dynamic and cyclic loads of wind, the rotor and the blades unsurprisingly represent the most common major component damages of a wind turbine system, which is especially enhanced when located offshore. This paper presents a new model-based prognosis procedure based on a zonotopic Kalman filter (ZKF), which combines a physical model with observed data to assess the system degradation. Using this information and the model of the system, the end of life (EOL) and the remaining useful life (RUL) with its uncertainty can be predicted. The proposed prognostic method is applied to monitor the state of health of a wind turbine system specifically, its blades. The remaining useful life prediction will help in scheduling optimal maintenance and reducing the cost caused by wind turbine damage and unplanned shutdown., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017- 88403-R), by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482) and by SMART Project (ref. num. EFA153/16 Interreg Cooperation Program POCTEFA 2014- 2020)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling daily water consumption through potential curves. Disaggregating apparent and real losses

  • Grau Torrent, Sergi
  • Pérez Magrané, Ramon
This is an Accepted Manuscript of an article published by Taylor & Francis in Urban Water Journal on 18 May 2020, available online: http://www.tandfonline.com/10.1080/1573062X.2020.1764594, This paper presents a model, based on potential curves, that describes the behaviour of the inverse of the daily cumulated frequency of the flows provided to a District Metered Area (DMA). The model has two terms, the first corresponds to the variable consumption due to the aggregation of demand patterns of consumers. The evolution of this term presents periodic behaviours with annual and weekly frequency. An extreme drought episode that affected Catalunya, reduced this parameter 19%. A second term presents exponential behaviour in its evolution and includes the real leakage. The leakage disaggregation together with the billing information allows the estimation of the apparent loses, 14.89% in the case study. The difficulty of estimating the parameters in a potential model, a complex problem of optimization, is simplified by applying mathematical moments. Hence, daily parameters become a linear relation of the daily moments that allows their algebraic operation., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493) and AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P4 MODEM. Data have been gently provided by the company Aigües de Manresa., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego Seix, Bernardo
All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller’s design to prevent a possibly severe deterioration of the system’s performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An LMI–based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan Gómez, Adrián
  • Rotondo, Damiano
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

La importancia y el alcance de los ciberataques sobre los sistemas de supervisión y control automático

  • Quevedo Casín, Joseba Jokin
  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Puig Cayuela, Vicenç
  • Escobet Canal, Teresa
El aumento de la conectividad de los sistemas de supervisión y de control automático de mediante el uso de Internet conlleva unos beneficios innegables pero a la vez abre la posibilidad a nuevos problemas (los ciberataques). La necesidad de mejorar la seguridad está suponiendo cada día cada vez más en el mundo científico-técnico. De hecho, si se analiza la bibliografía sobre contribuciones en el tema de ciberataques, según Scopus, se observa una curva exponencial ya que hemos pasado de 69 contribuciones científicas el año 2000 a casi 3000 el año 2019. Así pues, indudablemente este tema está siendo ya de gran actualidad y se vislumbra que lo será aún más en un futuro próximo para que los sistemas de supervisión y control automático sean fiables y seguros ante los crecientes intentos de ciberataques., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Position-heading quadrotor control using LPV techniques

  • Trapiello Fernández, Carlos
  • Puig Cayuela, Vicenç
  • Morcego Seix, Bernardo
This work presents a solution for the position-heading control problem of a small quadrotor. The main idea of this paper is to exploit the advantages of the Linear Parameter Varying (LPV) control approach, together with a feedback linearization approach, for designing a cascade control structure without the need to perform simplifications with respect to the reference dynamic model used in the literature. The use of a LPV representation of the attitude subsystem allows to consider it as independent from the position one, leading to a well known cascade control structure. For the inner attitude control loop, the proposed qLPV-LQR controller and Proportional-Integral Observer (PIO) are solved in an optimal manner by solving a set of Linear Matrix Inequalities (LMIs). While for the outer position control loop, a feedback linearization approach is developed before designing the corresponding controller and PI-Observer also minimizing the LQR problem by means of LMIs. Furthermore, another outer loop, interchangeable with the position one, such that controls the velocities in the Body frame is proposed. This velocities controller is also solved in an optimal manner using a combination of feedback linearization and LPV techniques. The proposed solutions are applied to an AscTec Hummingbird UAV in simulation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

LPV-MPC control of autonomous vehicles

  • Alcalá Baselga, Eugenio
  • Puig Cayuela, Vicenç
  • Quevedo Casín, Joseba Jokin
In this work, a novel approach is presented to solve the trajectory tracking problem for autonomous vehicles. This method is based on the use of a cascade control where the external loop solves the position control using a novel Linear Parameter Varying - Model Predictive Control (LPV-MPC) approach and the internal loop is in charge of the dynamic control of the vehicle using a LPV - Linear Quadratic Regulator technique designed via Linear Matrix Inequalities (LPV-LMI-LQR). Both techniques use an LPV representation of the kinematic and dynamic models of the vehicle. The main contribution of the LPV-MPC technique is its ability to calculate solutions very close to those obtained by the non-linear version but reducing significantly the computational cost and allowing the real-time operation. To demonstrate the potential of the LPV-MPC, we propose a comparison between the non-linear MPC formulation (NL-MPC) and the LPV-MPC approach., This work has been partially funded by the Spanish Governmentand FEDER through the projects CICYT DEOCS and SCAV (refs.MINECO DPI2016-76493, DPI2017-88403-R). This work has alsobeen partially funded by AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems (SAC) group grant (2017SGR 482), and by AGAUR and the Spanish Research Agencythrough the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimal batch scheduling of a multiproduct dairy process using a combined optimization/constraint programming approach

  • Escobet Canal, Teresa
  • Puig Cayuela, Vicenç
  • Quevedo Casín, Joseba Jokin
  • Palà Schönwälder, Pere
  • Romera Formiguera, Juli
  • Adelman, Winfried
This paper presents the optimal batch scheduling of a multi-product dairy process using an approach that combines optimization and constraint programming techniques. A suitable model describing the subprocesses and production rules is developed allowing to obtain scheduling constraints relating the production process and the machines available together with their relative efficiencies. After the scheduling problem has been formulated, the batch scheduling of a real powder milk/yogurt process is obtained in an optimal manner using the proposed approach with the objective of meeting customers’ deadlines considering the efficiencies/costs of available alternative machines. Results using real consumer orders on some representative scenarios corresponding to the dairy production plant used as a case study are provided. This application shows a formulation closer to the engineering problem description thanks to the constraint-based language that facilitates the adaptation of the optimization objectives and constraints to real applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Frequency-based detection of replay attacks: application to a quadrotor UAV

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Lopez Vidal, Marc
  • Quevedo Casín, Joseba Jokin
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unmanned aerial vehicles (UAVs) are reported to be highly exposed as possible targets of cyber attacks, due to their strong strategic and economic value, and their increasing use in a wide range of operations. Among the most critical cyber attacks, replay attacks are performed by replacing the real data coming from the sensors with previously recorded data. In this way, the attacker may provoke performance degradation, cause instability, and allow to perform undetectable physical attacks. The main contribution of this paper is to investigate the applicability of a frequency-based detection method, which uses a sine wave with time-varying frequency as authentication signal, to a UAV affected by replay attacks. The effectiveness of the method is illustrated through simulation scenarios., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fault detection and diagnostics in ventilation units using linear regression virtual sensors

  • Giovanni Mattera, Claudio
  • Quevedo Casín, Joseba Jokin
  • Escobet Canal, Teresa
  • Reza Shaker, Hamir
  • Jradi, Muhyiddine
Buildings represent a significant portion of global energy consumption. Ventilation units are one of the largest components in buildings systems and are responsible for large part of energy consumption. Ventilation units are complex components, often customized for the specific building. Their faults impact buildings' energy efficiency and occupancy comfort. In order to ensure their correct operation, proper Fault Detection and Diagnostics methods must be applied. Hardware redundancy, an effective approach to detect faults, leads to increased costs and space requirements. We propose to exploit physical relations inside the unit to create virtual sensors from other sensors' readings, introducing redundancy in the system. We create linear regression models for three sensors using other sensors related through physical laws as inputs. We use two different measures to detect when a virtual sensor deviates from the actual one: coefficient of determination and acceptable range. We test our method on a real building at the University of Southern Denmark. Our method detects a fault in temperature sensor, where its readings have an abnormal trend and fall outside acceptable ranae for one day., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A deep reinforcement learning approach for path following on a quadrotor

  • Rubí Perelló, Bartomeu
  • Morcego Seix, Bernardo
  • Pérez Magrané, Ramon
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes the Deep Deterministic Policy Grandient (DDPG) reinforcement learning algorithm to solve the path following problem in a quadrotor vehicle. This agent is implemented using a separated control and guidance structure with an autopilot tracking the attitude and velocity commands. The DDPG agent is implemented in python and it is trained and tested in the RotorS-Gazebo environment, a realistic multirotor simulator integrated in ROS. Performance is compared with Adaptive NLGL, a geometric algorithm that implements an equivalent control structure. Results show how the DDPG agent is able to outperform the Adaptive NLGL approach while reducing its complexity., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERDF) through the SCAV project (ref. MINECO DPI2017-88403-R), and by SMART project (ref. EFA 153/16 Interreg Cooperation Program POCTEFA 2014- 2020). Bartomeu Rubí is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI grant (ref. 2017FI B 00212)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quadrotor path following and reactive obstacle avoidance with deep reinforcement learning

  • Rubí Perelló, Bartomeu
  • Morcego Seix, Bernardo
  • Pérez Magrané, Ramon
A deep reinforcement learning approach for solving the quadrotor path following and obstacle avoidance problem is proposed in this paper. The problem is solved with two agents: one for the path following task and another one for the obstacle avoidance task. A novel structure is proposed, where the action computed by the obstacle avoidance agent becomes the state of the path following agent. Compared to traditional deep reinforcement learning approaches, the proposed method allows to interpret the training process outcomes, is faster and can be safely trained on the real quadrotor. Both agents implement the Deep Deterministic Policy Gradient algorithm. The path following agent was developed in a previous work. The obstacle avoidance agent uses the information provided by a low-cost LIDAR to detect obstacles around the vehicle. Since LIDAR has a narrow field-of-view, an approach for providing the agent with a memory of the previously seen obstacles is developed. A detailed description of the process of defining the state vector, the reward function and the action of this agent is given. The agents are programmed in python/tensorflow and are trained and tested in the RotorS/gazebo platform. Simulations results prove the validity of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project CICYT (ref. DPI2017-88403-R)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Health-aware LPV model predictive control of wind turbines

  • Khoury, Boutrous
  • Nejjari Akhi-Elarab, Fatiha
  • Puig Cayuela, Vicenç
Wind turbine components are subject to considerable stress and fatigue due to extreme environmental conditions to which they are exposed to, especially when located offshore. Interest in the integration of control with system health monitoring has increased in recent years. The integration of a health management module with model predictive control (MPC) provides the wind turbine a mechanism to operate safely and optimize the trade-off between components’ life and energy production. In this paper, a health-aware LPV model predictive control approach for wind turbines is proposed. The proposed controller establishes a trade-off between the economic objective based on maximizing the energy production but at the same time taking into account the minimization of accumulated stress on the wind turbine blades. The controller uses an LPV model for dealing with the non-linearity of the wind turbine model and the inclusion of the stress model. The proposed approach is tested on a well-known wind turbine case., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403- R) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

State-feedback and static-output-feedback parametric controllers based on a discrete-time LPV grid based approach

  • Medero Borrell, Ariel
  • Sename, Olivier
  • Puig Cayuela, Vicenç
This work presents a two-step LMI-based approach for the synthesis of State-Feedback and Static-Output-Feedback controllers for discrete-time Linear Parameter Varying systems. The benefit of the proposed approach lies on the fact that the two-step LMI method allows to enforce a common parametric structure on the controller for all the parameter space. This results in a final controller implementation that does not requires any interpolation step and thus, is of easy implementation. An illustrative example is given for an autonomous vehicle steering control design case., This work is supported by the French National Research Agency in the framework of the ”Investissemnts d'avenir” program ANR-15-IDEX-02. This work has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R) and by FPI UPC grant 2020FPI-UPC-008., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LPV lateral control for ADAS based on driver performance monitoring

  • Medero Borrell, Ariel
  • Sename, Olivier
  • Puig Cayuela, Vicenç
This paper presents a lateral control Advanced Driver Assistance System for cars, which uses both steering control and differential braking commands to aid drivers and enhance vehicle safety. The proposed strategy uses a LPV PI Observer for the estimation of driver performance over a range of vehicle speeds. This estimation is then used as scheduling signals to activate / deactivate the ADAS actuators. The strategy is tested in simulation with randomly generated driver profiles to prove the adaptability to a diverse range of driver's behavior., This work is supported by the French National Research Agency in the framework of the ”Investissemnts d’avenir” program ANR-15- IDEX-02. This work has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R) and by FPI UPC grant 2020FPI-UPC-008., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: application to UAV disturbance estimation

  • Cayero Becerra, Julián Francisco
  • Rotondo, Damiano
  • Morcego Seix, Bernardo
  • Puig Cayuela, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Detection of replay attacks in autonomous vehicles using a bank of QPV observers

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Puig Cayuela, Vicenç
  • Escobet Canal, Teresa
  • Quevedo Casín, Joseba Jokin
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper addresses the problem of replay attack detection in autonomous vehicles. Due to the strong presence of nonlinearities, traditional approaches based on linear approximations of the dynamics would not work effectively. For this reason, the proposed approach is based on a bank of quadratic parameter varying (QPV) observers, designed in such a way that each observer is insensitive to a replay attack that affects one specific sensor channel. This feature allows the development of a decision algorithm, whose effectiveness is validated by means of simulation results., This work was partially supported by the University of Stavanger through the project IN-12267. This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensor-data-driven prognosis approach of liquefied natural gas satellite plant

  • Escobet Canal, Antoni
  • Escobet Canal, Teresa
  • Quevedo Casín, Joseba Jokin
  • Molina, Adoración
This paper proposes a sensor-data-driven prognosis approach for the predictive maintenance of a liquefied natural gas (LNG) satellite plant. By using data analytics of sensors installed in the satellite plants, it is possible to predict the remaining time to refill the tank of the remote plants. In the proposed approach, the first task of data validation and correction is presented in order to transform raw data into reliable validated data. Then, the second task presents two methods for the prognosis of gas consumption in real time and the forecast of remaining time to refill the tank of the plant. The obtained results with real satellite plants showed good performance for direct implementation in a predictive maintenance plan., This work was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through projects SCAV (ref. DPI2017-88403-R), and by AGAUR ACCIO RIS3CAT UTILITIES 4.0–P1 ACTIV 4.0. ref. COMRDI-16-1-0054-03 and SMART Project (ref no EFA153/16 Interreg Cooperation Program POCTEFA 2014- 2020)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reconfigurability analysis of multirotor UAVs under actuator faults

  • Sanjuan Gómez, Adrián
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
This paper presents a reconfigurability analysis for different multirotor structures. The aim is to determine whether the multirotor is able to continue the mission without losing its controllability when faults occur in its actuators. The classical controllability condition is not enough in these systems. Hence two complementary methodologies have been developed to analyse the controllability of the multirotors: Analysis of the Static Reconfiguration Module (ASRM) and Attainable Control Set (ACS)., Peer Reviewed, Postprint (author's final draft)