Pasar al contenido principal

Automatic Control

FJCI-2016-29019

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis y diseño de sistemas lineales con parámetros variantes utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem S.
  • Nejjari, Fatiha
  • Puig, Vicenç
[EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H∞ performance and guaranteed quadratic cost, as well as different control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., [ES] En este artículo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H∞ garantizado y el coste cuadrático garantizado, así como también diferentes estructuras de control, tales como el control por realimentación de estado, el control por realimentación de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigación (AEI) mediante el sello de excelencia científica María de Maetzu al IRI (ref. MDM-2016-0656),la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019),y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A two-tank benchmark for detection and isolation of cyber attacks

  • Quevedo, Joseba
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
This paper presents a benchmark for the detection and isolation of cyber attacks, which is a non-linear controlled interconnected system based on a two tank system. In this benchmark, a malicious attacker wants to remain hidden while stealing water by altering the signals of the sensors of the levels of the tanks. It is assumed that the attacker can steal water from the tanks using extraction pumps with pre-established flow rates and, depending on the theft and the type of sensor alteration, different attack scenarios are proposed., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agència de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frequency-based detection of replay attacks: application to a multiple tank system

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a frequency-based method for detecting replay attacks and its application to a multiple tank system. This method introduces a sinusoidal signal with a time-varying frequency (authentication signature) into the closed-loop system and checks whether the output signal is compatible with the signature or not. The effectiveness of the method is illustrated through simulation scenarios using a 9-tank system under different situations., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agènda de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Análisis y Diseño de Sistemas Lineales con Parámetros Variantes Utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Nejjari, Fatiha
  • Puig, Vicenç
[ES] En este articulo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H1 garantizado y el coste cuadrático garantizado, as´ı como tambi´en diferentes estructuras de control, tales como el control por realimentacion de estado, el control por realimentacion de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., [EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H1 performance and guaranteed quadratic cost, as well as dierent control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigacion (AEI) mediante el sello de excelencia cientıfica Marıa de Maetzu al IRI (ref. MDM-2016-0656), la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019), y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A virtual actuator approach for the secure control of networked LPV systems under pulse-width modulated DoS attacks

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Puig, Vicenç
  • Escobet, Teresa
  • Quevedo, Joseba
In this paper, we formulate and analyze the problem of secure control in the context of networked linear parameter varying (LPV) systems. We consider an energy-constrained, pulse-width modulated (PWM) jammer, which corrupts the control communication channel by performing a denial-of-service (DoS) attack. In particular, the malicious attacker is able to erase the data sent to one or more actuators. In order to achieve secure control, we propose a virtual actuator technique under the assumption that the behavior of the attacker has been identified. The main advantage brought by this technique is that the existing components in the control system can be maintained without need of retuning them, since the virtual actuator will perform a reconfiguration of the plant, hiding the attack from the controller point of view. Using Lyapunov-based results that take into account the possible behavior of the attacker, design conditions for calculating the virtual actuators gains are obtained. A numerical example is used to illustrate the proposed secure control strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bibliographical review on cyber attacks from a control oriented perspective

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego, Bernardo
All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller's design to prevent a possibly severe deterioration of the system's performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Adrián Ruiz is also supported by Formació Personal Investigador a la Universitat Politècnica de Catalunya under an FPI-UPC 2018 grant (ref. 20 FPI-UPC 2018). Damiano Rotondo is also supported by Juan de la Cierva - Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection of replay attacks in cyber-physical systems using a frequency-based signature

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Saludes, Jordi
  • Quevedo, Joseba
This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: Application to UAV disturbance estimation

  • Cayero, Julián
  • Rotondo, Damiano
  • Morcego, Bernardo
  • Puig, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT DEOCS and SCAV (refs. MINECO DPI2016-76493, DPI2017-88403-R). It has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by AGAUR and the Spanish Research Agency through the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656). Julian Cayero is also supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, the European Social Fund (ESF) and the Agency for Management of University and Research Grants (AGAUR) under an FI-DGR grant (ref. 2016FI_B1 00024). Damiano Rotondo is also supported by a Juan de la Cierva-Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reachability and stabilization of scheduled steady-states for LPV single-input systems

  • Corona, Darío
  • Cristofaro, Andrea
  • Rotondo, Damiano
The aim of this work is characterizing the class of LPV systems that admit steady-state trajectories depending exclusively on the scheduling parameter. In particular, it will be shown that only certain parameter dependent steady-state profiles are admissible and can be reached by means of a suitable control input. Furthermore, the asymptotic stability and the stabilization of such steady-states is investigated using Lyapunov-based techniques. Extensive numerical simulations illustrate and corroborate the theoretical results., This work has been partially funded by the Spanish Government and FEDER through the project CICYT DEOCS (ref. DPI2016-76493-C3-3-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault and icing diagnosis in unmanned aerial vehicles using LPV interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval unknown input observer for the robust fault diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs) described by an uncertain model. The proposed interval observer evaluates the set of values for the state, which are compatible with the nominal fault-free and icing-free operation and can be designed in such a way that some information about the nature of the unknown inputs affecting the system can be obtained, thus allowing the diagnosis to be performed. The proposed strategy has several advantages. First, the LPV paradigm allows taking into account operating point variations. Second, the noise rejection properties are enhanced by the presence of the integral term. Third, the interval estimation property guarantees the absence of false alarms. Linear matrix inequality–based conditions for the analysis/design of these observers are provided in order to guarantee the interval estimation of the state and the boundedness of the estimation. The developed theory is supported by simulation results, obtained with the uncertain model of a Zagi Flying Wing UAV, which illustrate the strong appeal of the methodology for identifying correctly unexpected changes in the system dynamics due to actuator faults or icing., EEA Financial Mechanism by a grantfrom Iceland, Liechtenstein, and Norway;Universidad Complutense de Madrid,Grant/Award Number:006-ABEL-IM-2014B; Spanish StateResearch Agency (AEI) and the EuropeanRegional Development Fund (ERFD),Grant/Award Numbers: CICYT DEOCSDPI2016-76493 and CICYT SCAVDPI2017-88403-R; DGR of the Generalitatde Catalunya, Grant/Award Number:2017/SGR/482; Spanish State ResearchAgency through the María de Maeztu Sealof Excellence to IRI, Grant/AwardNumber: MDM-2016-0656; Juan de laCierva Formación, Grant/Award Number:FJCI-2016-29019; Research Council ofNorway through the Centres of Excellencefunding scheme, Grant/Award Number:223254-AMOS; ERCIM Alain BensoussanFellowship programme
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator and sensor fault estimation based on a proportional-integral quasi-LPV observer with inexact scheduling parameters

  • Gómez-Peñate, Samuel
  • López-Estrada, Francisco-Ronay
  • Valencia-Palomo, Guillermo
  • Rotondo, Damiano
Trabajo presentado en el 3rd IFAC Workshop on Linear Parameter-Varying Systems, celebrado en Eindhoven (Países Bajos), del 4 al 6 de noviembre de 2019, This paper presents a method for actuator and sensor fault estimation based on a proportional-integral observer (PIO) for a class of nonlinear system described by a polytopic quasi-linear parameter varying (qLPV) mathematical model. Contrarily to the traditional approach, which considers measurable or unmeasurable scheduling parameters, this work proposes a methodology that considers inexact scheduling parameters. This condition is present in many physical systems where the scheduling parameters can be affected by noise, offsets, calibration errors, and other factors that have a negative impact on the measurements. A H¿ performance criterion is considered in the design in order to guarantee robustness against sensor noise, disturbance, and inexact scheduling parameters. Then, a set of linear matrix inequalities (LMIs) is derived by the use of a quadratic Lyapunov function. The solution of the LMI guarantees asymptotic stability of the PIO. Finally, the performance and applicability of the proposed method are illustrated through a numerical experiment in a nonlinear system., This work is supported by Tecnologico Nacional de Mexico and the National Council of Science and Technology (CONACyT). The support is gratefully acknowledged. This work has been also partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An LMI-based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan, Adrián
  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Sarrate, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR through the contract FI-AGAUR (ref. 2017FI-B00285) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). This work has also been supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva—Formación (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault-tolerant control of discrete-time descriptor systems using virtual actuators

  • Wang, Ye
  • Rotondo, Damiano
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Zhao, Yuxin
Trabajo presentado en la 4th Conference on Control and Fault Tolerant Systems (SysTol), celebrada en Casablanca (Marruecos), del 18 al 20 de septiembre de 2019, This paper proposes a fault-tolerant control (FTC) strategy based on virtual actuators for discrete-time descriptor systems subject to multiplicative and additive actuator faults. The goal of this FTC strategy is to reconfigure the closed-loop system by means of a virtual actuator that allows maintaining the use of the nominal controller without having to retune it. To achieve this goal, we define the structure of a dynamical virtual actuator for descriptor systems including multiplicative and additive actuator faults. In order to use a state-feedback controller for implementing the FTC strategy, a state observer for descriptor systems is also defined. Under the proposed FTC scheme, the separation principle of the virtual actuator, the nominal closed-loop system and the state observer is established. Therefore, all the gains can be designed separately. Finally, a numerical example is provided to show the effectiveness of the proposed FTC strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493-C3-3-R), the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and the grant Juan de la Cierva-Formacion (FJCI-2016-29019), and by the ´ Fundamental Research Funds for the Central University (No. 3072019CFJ0406).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State observer design for quadratic parameter varying (QPV) systems

  • Rotondo, Damiano
  • Arne Johansen, Tor
Trabajo presentado en el 18th European Control Conference (ECC), celebrado en Nápoles (Italia), del 25 al 28 de junio de 2019, This paper addresses the problem of state observation in quadratic parameter varying (QPV) systems. In particular, a state observer is designed in such a way that the estimation error converges to zero with a desired rate of convergence in a given polytopic region of the error space. Under some assumptions, it is shown that design conditions can be given in the form of a set of bilinear matrix inequalities (BMIs), which can be reduced to linear matrix inequalities (LMIs), which are computationally more tractable. The main characteristics of the proposed approach are illustrated by means of an example, which confirms the validity of the theoretical results., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019), and by the Research Council of Norway through the AMOS Center, grant number 223254.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Observer design for Takagi-Sugeno Lipschitz systems affected by disturbances using quadratic boundedness

  • Yang, Ruicong
  • Rotondo, Damiano
  • Puig, Vicenç
Trabajo presentado en la International Conference on Control, Automation and Diagnosis (ICCAD), celebrada en Grenoble (Francia), del 2 al 4 de julio de 2019, In this paper, a proportional observer design using quadratic boundedness is proposed in order to estimate the state of a system described by a Takagi-Sugeno model with a Lipschitz nonlinearity term, and affected by unknown disturbances. The conditions for ensuring that the error between the real and the estimated state converge within an ellipsoidal region about zero, are provided in the form of a linear matrix inequality (LMI) formulation. Then, the simulation results of this approach applied to a four-wheeled omni-directional mobile robot will be shown., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva - Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Time evolution pattern analysis for cyber attack detection in a two-tank benchmark

  • Quevedo, Josebac
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
Trabajo presentado en el 8th International Conference on Systems and Control (ICSC), celebrado en Marrakech (Marruecos), del 23 al 25 de octubre de 2019, This paper presents some results related to the detection and isolation of cyber attacks in a recently proposed benchmark based on a two-tank system. The benchmark proposes some attack scenarios in which a malicious attacker alters the signals of the water level sensors in the tanks, in order to remain hidden while stealing water. This paper shows the difficulty to detect cyber attacks based only on the model-based residuals calculated using the measured variables. On the other hand, by using the time evolution pattern analysis of the measured sensors, it becomes possible to detect some of these cyber attacks., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

  • López-Estrada, Francisco-Ronay
  • Rotondo, Damiano
  • Valencia-Palomo, Guillermo
This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC)., This work has been supported by Tecnológico Nacional de México grants 6723.18-P and 5400.19-P, the Instituto de Ciencia Tecnológia e Innovación, Chiapas (ICTIECH) 1123/2019. This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent advances on optimization for control, observation, and safety

  • Valencia-Palomo, Guillermo
  • López-Estrada, Francisco-Ronay
  • Rotondo, Damiano
Mathematical optimization is the selection of the best element in a set with respect to a given criterion. Optimization has become one of the most commonly used tools in modern control theory to compute control laws, adjust the controller parameters (tuning), estimate unmeasured states, find suitable conditions to fulfill a given closed-loop property, carry out model fitting, among others. Optimization is also used in the design of fault detection and isolation systems, due to the complexity of automated installations and to prevent safety hazards and huge production losses that require the detection and identification of any kind of fault, as early as possible, as well as the minimization of their impacts by implementing real-time fault detection and fault-tolerant operations systems where optimization algorithms play an important role. Recently, it has been proved that many optimization problems with convex objective functions and linear matrix inequality (LMI) constraints can be solved efficiently using existing software, which increases the flexibility and applicability of the control algorithms. Therefore, real-world control systems need to comply with several conditions and constraints that have to be taken into account in the problem formulation, which represents a challenge in the application of the optimization algorithms. This special issue aims at offering an overview of the state-of-the-art of the most advanced (online and offline) optimization techniques and their applications in control engineering., This work was funded by Tecnológico Nacional de México under the program “Investigación Científica Básica y Aplicada”. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estimation in uncertain switched systems using a bank of interval observers: local vs glocal approach

  • Rotondo, Damiano
  • Efimov, Denis
  • Cristofaro, Andrea
  • Johansen, Tor Arne
This paper discusses some issues related with the design of a bank of interval observers for uncertain switched systems, in which several sources of uncertainty are considered: parametric uncertainties, unknown disturbances, measurement noise, and unknown switching signal. More specifically, this paper focuses on analyzing the interval estimation accuracy when changes of active mode induce non-positivity of the interval state estimation errors. In particular, it is shown that by combining two types of interval observers, referred to as local and global, the accuracy and reliability of the estimation can be improved. The properties of the obtained so-called glocal observer are investigated and illustrated by means of numerical simulations., This work has been supported by the Spanish State Research Agency (AEI)through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) andthe grant Juan de la Cierva-Formacion (FJCI-2016-29019), by the ResearchCouncil of Norway through the AMOS Center, grant number 223254 and bythe University of Stavanger through the project IN-12267, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An LMI–based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan Gómez, Adrián
  • Rotondo, Damiano
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Frequency-based detection of replay attacks: application to a quadrotor UAV

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Lopez Vidal, Marc
  • Quevedo Casín, Joseba Jokin
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unmanned aerial vehicles (UAVs) are reported to be highly exposed as possible targets of cyber attacks, due to their strong strategic and economic value, and their increasing use in a wide range of operations. Among the most critical cyber attacks, replay attacks are performed by replacing the real data coming from the sensors with previously recorded data. In this way, the attacker may provoke performance degradation, cause instability, and allow to perform undetectable physical attacks. The main contribution of this paper is to investigate the applicability of a frequency-based detection method, which uses a sine wave with time-varying frequency as authentication signal, to a UAV affected by replay attacks. The effectiveness of the method is illustrated through simulation scenarios., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the optimization of actuator saturation limits for LTI systems: an LMI-based invariant ellipsoid approach

  • Rotondo, Damiano
  • Rizzello, Gianluca
This paper considers the problem of optimal actuator dimensioning for LTI systems, in the sense of choosing appropriate saturation limits for a given set of admissible initial conditions and for a predefined integral state-feedback control law. By using an invariant ellipsoid argument, it is shown that this problem can be described as a linear matrix inequality (LMI)-based optimization that can be solved efficiently. Moreover, the paper shows that the optimal actuator dimensioning is connected to the choice of the initial conditions of the integral states of the controller, which can be included in the overall optimization to improve further the results. Two different methods are described and analyzed by means of simulation results., This work has been supported by the Spanish State Research Agency (AEI)through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656)and the grant Juan de la Cierva-Formacion (FJCI-2016-29019), by the DAADfunding programme: Research Grants - Short-Term Grants, 2019 (57440917),personal reference: 91725219, and by the University of Stavanger through theproject IN-12267., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Detection of replay attacks in CPSs using observer-based signature compensation

  • Trapiello Fernández, Carlos
  • Rotondo, Damiano
  • Sánchez Corrales, Helem Sabina
  • Puig Cayuela, Vicenç
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a replay attack detection method that addresses the performance loss of watermarking-based approaches. The proposed method injects a sinusoidal signal that affects a subset, chosen at random, of the system outputs. The presence of the signal in each one of the outputs is estimated by means of independent observers and its effect is compensated in the control loop. When a system output is affected by a replay attack, the loss of feedback of the associated observer destabilizes the signal estimation, leading to an exponential increase of the estimation error up to a threshold, above which the estimated signal compensation in the control loop is disabled. This event triggers the detection of a replay attack over the output corresponding to the disrupted observer. The effectiveness of the method is demonstrated using results obtained with a quadruple-tank system simulator., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recent advances on optimization for control, observation, and safety

  • Valencia Palomo, Guillermo
  • Lopez-Estrada, F.R.
  • Rotondo, Damiano
Mathematical optimization is the selection of the best element in a set with respect to a given criterion. Optimization has become one of the most commonly used tools in modern control theory to compute control laws, adjust the controller parameters (tuning), estimate unmeasured states, find suitable conditions to fulfill a given closed-loop property, carry out model fitting, among others. Optimization is also used in the design of fault detection and isolation systems, due to the complexity of automated installations and to prevent safety hazards and huge production losses that require the detection and identification of any kind of fault, as early as possible, as well as the minimization of their impacts by implementing real-time fault detection and fault-tolerant operations systems where optimization algorithms play an important role. Recently, it has been proved that many optimization problems with convex objective functions and linear matrix inequality (LMI) constraints can be solved efficiently using existing software, which increases the flexibility and applicability of the control algorithms. Therefore, real-world control systems need to comply with several conditions and constraints that have to be taken into account in the problem formulation, which represents a challenge in the application of the optimization algorithms. This special issue aims at offering an overview of the state-of-the-art of the most advanced (online and offine) optimization techniques and their applications in control engineering., This work was funded by Tecnológico Nacional de México under the program “Investigación CientíficaBásica y Aplicada”. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellenceto IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-2901, Peer Reviewed, Postprint (published version)