Pasar al contenido principal

DESARROLLO DE HERRAMIENTAS AVANZADAS PARA METODOLOGIAS DE DISEÑO Y OPTIMIZACION MULTIOBJETIVO EN INGENIERIA DE CONTROL. APLICACION A SISTEMAS MULTIVARIABLES.

DPI2015-71443-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computing Optimal Distances to Pareto Sets of Multi-Objective Optimization Problems in Asymmetric Normed Lattices

  • Blasco, Xavier|||0000-0002-9737-2833
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Reynoso-Meza, G.
[EN] Given a finite dimensional asymmetric normed lattice, we provide explicit formulae for the optimization of the associated (non-Hausdorff) asymmetric distance among a subset and a point. Our analysis has its roots and finds its applications in the current development of effective algorithms for multi-objective optimization programs. We are interested in providing the fundamental theoretical results for the associated convex analysis, fixing in this way the framework for this new optimization tool. The fact that the associated topology is not Hausdorff forces us to define a new setting and to use a new point of view for this analysis. Existence and uniqueness theorems for this optimization are shown. Our main result is the translation of the original abstract optimal distance problem to a clear optimization scheme. Actually, this justifies the algorithms and shows new aspects of the numerical and computational methods that have been already used in visualization of multi-objective optimization problems., This work was supported by the Ministerio de Economia y Competitividad (Spain) under grants DPI2015-71443-R and MTM2016-77054-C2-1-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Unified Approach for the Identification of Wiener, Hammerstein, and Wiener Hammerstein Models by Using WH-EA and Multistep Signals

  • Zambrano-Abad, Julio Cesar
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] Wiener, Hammerstein, and Wiener-Hammerstein structures are useful for modelling dynamic systems that exhibit a static type nonlinearity. Many methods to identify these systems can be found in the literature; however, choosing a method requires prior knowledge about the location of the static nonlinearity. In addition, existing methods are rigid and exclusive for a single structure. This paper presents a unified approach for the identification of Wiener, Hammerstein, and Wiene-Hammerstein models. This approach is based on the use of multistep excitation signals and WH-EA (an evolutionary algorithm for Wiener¿Hammerstein system identification). The use of multistep signals will take advantage of certain properties of the algorithm, allowing it to be used as it is to identify the three types of structures without the need for the user to know a priori the process structure. In addition, since not all processes can be excited with Gaussian signals, the best linear approximation (BLA) will not be required. Performance of the proposed method is analysed using three numerical simulation examples and a real thermal process. Results show that the proposed approach is useful for identifying Wiener, Hammerstein, and Wiener-Hammerstein models, without requiring prior information on the type of structure to be identified., This work was partially supported by projects DPI2015-71443-R and RTI2018-096904-B-I00 from the Spanish Ministry of Economy and Competitiveness and was also supported by Salesian Polytechnic University in Ecuador through a PhD scholarship granted to J. Z.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimización Multiobjetivo en Modelado y Control de un Péndulo Invertido Rotatorio, Multi-objective Optimization in Modeling and Control for Rotary Inverted Pendulum

  • Huilcapi Subia, Victor
  • Lima Cedillo, Byron Xavier
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] This article shows the application of multi-objective optimization techniques, both for the identification of parameters of a model and for the adjustment of controllers. In particular, we propose a technique to identify the parameters of a first principles model of a rotational inverted pendulum applying a methodology of multi- objective optimization and experimental data. Also the methodology extends to the tuning of PID and PI controllers for the mentioned system. For multiobjective optimization, an implementation based on evolutionary algorithms has been used, ev-MOGA  Herrero et al., 2007). For the analysis phase of the front solutions, we use the Pareto front visualization tool called level diagram (Blasco et al., 2017), which allows to successfully explore a set of Pareto optimal solutions and select one of them according to the preferences of the designer. The advantage oered by this methodology is the easy understanding of the conflicts that appear among the design objectives, allowing to select a compromise solution according to the preferences of the designer, without losing sight of the set of optimal solutions found. , [ES] Este artículo muestra la aplicación de técnicas de optimización multiobjetivo, tanto para la identificación de parámetros de un modelo como para el ajuste de controladores. En particular, se propone una técnica para identificar los parámetros de un modelo en primeros principios para un péndulo invertido rotatorio aplicando una metodología de optimización multiobjetivo y datos experimentales. Así también la metodología se extiende a la sintonización de controladores PID y PI para el sistema en mención. En la aplicación de la metodología multiobjetivo se utilizan una serie de herramientas para cada una de las etapas. Como optimizador se ha utilizado una implementación basada en algoritmos evolutivos, ev-MOGA (Herrero et al., 2007). Para la fase de análisis de las soluciones del frente se utiliza la herramienta de visualización del frente de Pareto denominada level diagram (Blasco et al., 2017), que permite explorar satisfactoriamente el conjunto de soluciones óptimas de Pareto y seleccionar una de ellas de acuerdo con las preferencias del diseñador. Una ventaja que ofrece esta metodología es la fácil comprensión de las conflictos que aparecen entre los objetivos de diseño, permitiendo seleccionar una solución de compromiso satisfactoria de cuerdo a las preferencias del diseñador, sin perder de vista el conjunto de soluciones óptimas encontradas., Este trabajo fue soportado por el Ministerio de Economía y Competitividad (Espana) [Proyecto DPI2015-71443-R] y la Universidad Politécnica Salesiana (Ecuador) [CB-755-2015].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing controller&apos, s tuning reliability with multi-objective optimisation: From Model in the loop to Hardware in the loop

  • Reynoso Meza, Gilberto
  • Velasco-Carrau, Jesús
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Blasco, Xavier|||0000-0002-9737-2833
[EN] In general, the starting point for the complex task of designing a robust and efficient control system is the use of nominal models that allow to establish a first set of parameters for the selected control scheme. Once the initial stage of design is achieved, control engineers face the difficult task of Fine-Tuning for a more realistic environment, where the environment conditions are as similar as possible to the real system. For this reason, in the last decades the use of Hardware-in-The-Loop (HiL) systems has been introduced. This simulation technique guarantees realistic simulation environments to test the designs but without danger of damaging the equipment. Also, in this iterative process of Fine-Tuning, it is usual to use different (generally conflicting/opposed) criteria that take into account the sensitivities that always appear in every project, such as economic, security, robustness, performance, for example. In this framework, the use of multi-objective techniques are especially useful since they allow to study the different design alternatives based on the multiple existing criteria. Unfortunately, the combination of multi-objective techniques and verification schemes based on Hardware-In-The-Loop presents a high incompatibility. Since obtaining the optimal set of solutions requires a high computational cost that is greatly increased when using Hardware- In-the-Loop. For this reason, it is often necessary to use less realistic but more computationally efficient verification schemes such as Model in the Loop (MiL), Software in the Loop (SiL) and Processor in the Loop (PiL). In this paper, a combined methodology is presented, where multi-objective optimisation and multi-criteria decision making steps are sequentially performed to achieve a final control solution. The authors claim that while going towards the optimisation sequence over MiL -> SiL -> PiL -> HiL platforms, the complexity of the problem is unveiled to the designer, allowing to state meaningful design objectives. In addition, safety in the step between simulation and reality is significantly increased., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness for providing funding through the project DPI2015-71443-R and the grant BES-2012-056210. This work has been partially supported by the National Council of Scientific and Technological Development of Brazil (CNPq) through the BJT/304804/2014-2 and PQ-2/304066/2016-8 grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Multiobjective Genetic Algorithm for the Localization of Optimal and Nearly Optimal Solutions Which Are Potentially Useful: nevMOGA

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Reynoso-Meza, Gilberto
[EN] Traditionally, in a multiobjective optimization problem, the aim is to find the set of optimal solutions, the Pareto front, which provides the decision-maker with a better understanding of the problem. This results in a more knowledgeable decision. However, multimodal solutions and nearly optimal solutions are ignored, although their consideration may be useful for the decision-maker. In particular, there are some of these solutions which we consider specially interesting, namely, the ones that have distinct characteristics from those which dominate them (i.e., the solutions that are not dominated in their neighborhood). We call these solutions potentially useful solutions. In this work, a new genetic algorithm called nevMOGA is presented, which provides not only the optimal solutions but also the multimodal and nearly optimal solutions nondominated in their neighborhood. This means that nevMOGA is able to supply additional and potentially useful solutions for the decision-making stage. This is its main advantage. In order to assess its performance, nevMOGA is tested on two benchmarks and compared with two other optimization algorithms (random and exhaustive searches). Finally, as an example of application, nevMOGA is used in an engineering problem to optimally adjust the parameters of two PI controllers that operate a plant., This work was partially supported by the Ministerio de Economia y Competitividad (Spain) Grant numbers DPI2015-71443-R and FPU15/01652, by the local administration Generalitat Valenciana through the project GV/2017/029, and by the National Council of Scientific and Technological Development of Brazil (CNPq) through the grant PQ-2/304066/2016-8.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

WH-EA: An Evolutionary Algorithm for Wiener-Hammerstein System Identification

  • Zambrano-Abad, Julio Cesar
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] Current methods to identify Wiener-Hammerstein systems using Best Linear Approximation (BLA) involve at least two steps. First, BLA is divided into obtaining front and back linear dynamics of the Wiener-Hammerstein model. Second, a re tting procedure of all parameters is carried out to reduce modelling errors. In this paper, a novel approach to identify Wiener-Hammerstein systems in a single step is proposed. is approach is based on a customized evolutionary algorithm (WH-EA) able to look for the best BLA split, capturing at the same time the process static nonlinearity with high precision. Furthermore, to correct possible errors in BLA estimation, the locations of poles and zeros are subtly modi ed within an adequate search space to allow a ne-tuning of the model. e performance of the proposed approach is analysed by using a demonstration example and a nonlinear system identi cation benchmark., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (Project DPI2015-71443-R) and Salesian Polytechnic University of Ecuador through a Ph.D. scholarship granted to the first author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Motion Equations and Attitude Control in the Vertical Flight of a VTOL Bi-Rotor UAV

  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Velasco-Carrau, Jesús
  • Paredes-Valles, Federico
[EN] This paper gathers the design and implementation of the control system that allows an unmanned Flying-wing to perform a Vertical Take-Off and Landing (VTOL) maneuver using two tilting rotors (Bi-Rotor). Unmanned Aerial Vehicles (UAVs) operating in this configuration are also categorized as Hybrid UAVs due to their ability of having a dual flight envelope: hovering like a multi-rotor and cruising like a traditional fixed-wing, providing the opportunity of facing complex missions in which these two different dynamics are required. This work exhibits the Bi-Rotor nonlinear dynamics, the attitude tracking controller design and also, the results obtained through Hardware-In-the-Loop (HIL) simulation and experimental studies that ensure the controller's efficiency in hovering operation., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness for providing funding through the project DPI2015-71443-R and the local administration Generalitat Valenciana through the project GV/2017/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized sound diffusers based on sonic crystals using a multiobjective evolutionary algorithm

  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Vorlander, Michael
Sonic crystals have been demonstrated to be good candidates to substitute for conventional diffusers in order to overcome the need for extremely thick structures when low frequencies have to be scattered, however, their performance is limited to a narrow band. In this work, multiobjective evolutionary algorithms are used to extend the bandwidth to the whole low frequency range. The results show that diffusion can be significantly increased. Several cost functions are considered in the paper, on the one hand to illustrate the flexibility of the optimization and on the other hand to demonstrate the problems associated with the use of certain cost functions. A study of the robustness of the optimized diffusers is also presented, introducing a parameter that can help to choose among the best candidates. Finally, the advantages of the use of multiobjective optimization in comparison with conventional optimizations are discussed., This work was partially supported by the Spanish "Ministerio de Economia y Competitividad" under the projects TEC2015-68076-R and DPI2015-71443-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recursive Rewarding Modified Adaptive Cell Decomposition (RR-MACD): A Dynamic Path Planning Algorithm for UAVs

  • Samaniego-Riera, Franklin Eduardo
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] A relevant task in unmanned aerial vehicles (UAV) flight is path planning in 3D environments. This task must be completed using the least possible computing time. The aim of this article is to combine methodologies to optimise the task in time and offer a complete 3D trajectory. The flight environment will be considered as a 3D adaptive discrete mesh, where grids are created with minimal refinement in the search for collision-free spaces. The proposed path planning algorithm for UAV saves computational time and memory resources compared with classical techniques. With the construction of the discrete meshing, a cost response methodology is applied as a discrete deterministic finite automaton (DDFA). A set of optimal partial responses, calculated recursively, indicates the collision-free spaces in the final path for the UAV flight., The authors would like to acknowledge the Spanish Ministry of Economy and Competitiveness for providing funding through the project DPI2015-71443-R and the local administration Generalitat Valenciana through the project GV/2017/029. Franklin Samaniego thanks IFTH (Instituto de Fomento al Talento Humano) Ecuador (2015-AR2Q9209), for its sponsorship of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BIBO stabilisation of continuous time takagi sugeno systems under persistent perturbations and input saturation

  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Hilario Caballero, Adolfo|||0000-0002-3237-8652
[EN] This paper presents a novel approach to the design of fuzzy state feedback controllers for continuous-time non-linear systems with input saturation under persistent perturbations. It is assumed that all the states of the Takagi¿Sugeno (TS) fuzzy model representing a non-linear system are measurable. Such controllers achieve bounded input bounded output (BIBO) stabilisation in closed loop based on the computation of inescapable ellipsoids. These ellipsoids are computed with linear matrix inequalities (LMIs) that guarantee stabilisation with input saturation and persistent perturbations. In particular, two kinds of inescapable ellipsoids are computed when solving a multiobjective optimization problem: the maximum volume inescapable ellipsoids contained inside the validity domain of the TS fuzzy model and the smallest inescapable ellipsoids which guarantee a minimum *-norm (upper bound of the 1-norm) of the perturbed system. For every initial point contained in the maximum volume ellipsoid, the closed loop will enter the minimum *-norm ellipsoid after a finite time, and it will remain inside afterwards. Consequently, the designed controllers have a large domain of validity and ensure a small value for the 1-norm of closed loop., The authors wish to thank the Editor-in-Chief and the anonymous reviewers for their valuable comments and suggestions. This work has been funded by Ministerio de Economia y Competitividad (Spain) through the research project DPI2015-71443-R and by Generalitat Valenciana (Valencia, Spain) through the research project GV/2017/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using a Multiobjective Approach to Compare Multiple Design Alternatives An Application to Battery Dynamic Model Tuning

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] A design problem is usually solvable in different ways or by design alternatives. In this work, the term concept is used to refer to the design alternatives. Additionally, it is quite common that a design problem has to satisfy conflicting objectives. In these cases, the design problem can be formulated as a multiobjective optimization problem (MOP). One of the aims of this work was to show how to combine multiobjective requirements with concepts comparisons, in order to attain a satisfactory design. The second aim of this work was to take advantage of this methodology to obtain a battery model that described the dynamic behavior of the main electrical variables. Two objectives related to the model accuracy during the charge and discharge processes were used. In the final model selection, three different concepts were compared. These concepts differed in the complexity of their model structure. More complex models usually provide a good approximation of the process when identification data are used, but the approximation could be worse when validation data are applied. In this article, it is shown that a model with an intermediate complexity supplies a good approximation for both identification and validation data sets., This work was partially supported by the Ministerio de Economia y Competitividad (Spain), Grant Numbers: DPI2015-71443-R and FPU15/01652.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control-Oriented Modeling of the Cooling Process of a PEMFC-Based u-CHP System

  • Navarro-Giménez, Santiago
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] Micro-combined heat and power systems (¿-CHP) based on proton exchange membrane fuel cell stacks (PEMFC) are capable of supplying electricity and heat for the residential housing sector with a high energy efficiency and a low level of CO2 emissions. For this reason, they are regarded as a promising technology for coping with the current environmental challenges. In these systems, the temperature control of the stack is crucial, since it has a direct impact on its durability and electrical efficiency. In order to design a good temperature control, however, a dynamic model of the ¿-CHP cooling system is required. In this paper, we present a model of the cooling system of a PEMFC-based ¿-CHP system, which is oriented to the design of the temperature control of the stack. The model has been developed from a ¿-CHP system located in the laboratory of our research team, the predictive control and heuristic optimization group (CPOH). It is based on first principles, dynamic, non-linear, and has been validated against the experimental data. The model is implemented in Matlab/Simulink and the adjustment of its parameters was carried out using evolutionary optimization techniques. The methodology followed to obtain it is also described in detail. Both the model and the test data used for its adjustment and validation are accessible to anyone who wants to consult them. The results show that the model is able to faithfully represent the dynamics of the ¿-CHP cooling system, so it is appropriate for the design of the stack temperature control, This work was supported in part by the Ministerio de Economia y Competitividad, Spain, under Grant DPI2015-71443-R and Grant RTI2018-096904-B-I00, and in part by the Local Administration Generalitat Valenciana under Project GV/2017/029
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New optimal controller tuning method for an AVR system using a simplified Ant Colony Optimization with a new constrained Nelder-Mead algorithm

  • Blondin, Maude Joseé
  • Sicard, Pierre
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] In this paper, an optimal gain tuning method for PID controllers is proposed using a novel combination of a simplified Ant Colony Optimization algorithm and Nelder¿Mead method (ACO-NM) including a new procedure to constrain NM. To address Proportional-Integral-Derivative (PID) controller tuning for the Automatic Voltage Regulator (AVR) system, this paper presents a meta-analysis of the literature on PID parameter sets solving the AVR problem. The investigation confirms that the proposed ACO-NM obtains better or equivalent PID solutions and exhibits higher computational efficiency than previously published methods. The proposed ACO-NM application is extended to realistic conditions by considering robustness to AVR process parameters, control signal saturation and noisy measurements as well as tuning a two-degree-of-freedom PID controller (2DOF-PID). For this type of PID, a new objective function is also proposed to manage control signal constraints. Finally, real time control experiments confirm the performance of the proposed 2DOF-PIDs in quasi-real conditions. Furthermore, the efficiency of the algorithm is confirmed by comparing its results to other optimization algorithms and NM combinations using benchmark functions., This work was supported by the Vanier Canada Graduate Scholarship, the Michael Smith Foreign Study Supplements Program from the Natural Sciences and Engineering Research Council of Canada and by the Ministerio de Economia y Competitividad (Spain), project DPI2015-71443-R. It was also supported by the Bourse Mobilite Etudiante from Ministere de l'Education du Quebec, the CEMF Claudette MacKay-Lassonde Graduate Engineering Ambassador Award and the SWAAC Bourseau merite pour etudiantes de cycles superieurs.