Pasar al contenido principal

TECNICAS DE OPTIMIZACION Y PERSONALIZACION DE SONIDO INMERSIVO PARA EL GRAN PUBLICO

TEC2015-68076-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced numerical method for the design of 3D-printed holographic acoustic lenses for aberration correction of single-element transcranial focused ultrasound

  • Ferri García, Marcelino
  • Jose Maria Bravo|||0000-0002-8337-7385
  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
[EN] The correction of transcranial focused ultrasound aberrations is a relevant issue for enhancing various non-invasive medical treatments. The emission through multi-element phased arrays has been the most widely accepted method to improve focusing in recent years; however, the number and size of transducers represent a bottleneck that limits the focusing accuracy of the technique. To overcome this limitation, a new disruptive technology, based on 3-D-printed acoustic lenses, has recently been proposed. As the submillimeter precision of the latest generation of 3-D printers has been proven to overcome the spatial limitations of phased arrays, a new challenge is to improve the accuracy of the numerical simulations required to design this type of ultrasound lens. In the study described here, we evaluated two improvements in the numerical model applied in previous works for the design of 3-D-printed lenses: (i) allowing the propagation of shear waves in the skull by means of its simulation as an isotropic solid and (ii) introduction of absorption into the set of equations that describes the dynamics of the wave in both fluid and solid media. The results obtained in the numerical simulations are evidence that the inclusion of both s-waves and absorption significantly improves focusing., This work was partially supported by the Spanish Ministerio de Economia y Empresa under Project TEC2015-68076-R. The authors thank Jose Sepulveda, director of Asociacion I2 CV, for his important input and scientific support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Quality of Consumer Headphones in the Perception of Spatial Audio

  • Gutiérrez-Parera, Pablo|||0000-0002-5349-5698
  • López Monfort, José Javier|||0000-0001-6884-5577
High quality headphones can generate a realistic sound immersion reproducing binaural recordings. However, most people commonly use consumer headphones of inferior quality, as the ones provided with smartphones or music players. Factors, such as weak frequency response, distortion and the sensitivity disparity between the left and right transducers could be some of the degrading factors. In this work, we are studying how these factors affect spatial perception. To this purpose, a series or perceptual tests have been carried out with a virtual headphone listening test methodology. The first experiment focuses on the analysis of how the disparity of sensitivity between the two transducers affects the final result. The second test studies the influence of the frequency response relating quality and spatial impression. The third test analyzes the effects of distortion using a Volterra kernels scheme for the simulation of the distortion using convolutions. Finally, the fourth tries to relate the quality of the frequency response with the accuracy on azimuth localization. The conclusions of the experiments are: the disparity between both transducers can affect the localization of the source; the perception of quality and spatial impression has a high correlation; the distortion produced by the range of headphones tested at a fixed level does not affect the perception of binaural sound; and that some frequency bands have an important role in the front-back confusions., The Spanish Ministry of Economy and Competitiveness supported this work under the projects TEC2012-37945-C02-01, TEC2015-68076-R and the grant BES-2013-065034.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects and applications of spatial acuity in advanced spatial audioreproduction systems with loudspeakers

  • López Monfort, José Javier|||0000-0001-6884-5577
  • Gutiérrez-Parera, Pablo|||0000-0002-5349-5698
  • Savioja, Lauri
[EN] Spatial audio reproduction systems using loudspeakers produce coloration effects at high frequencies due to spatial interference between loudspeakers, in both those based on panning and those based on field synthesis. As a response to this problem and in order to reduce coloration, this paper studies the feasibility of an alternative approach where high-frequencies are reproduced from a single loudspeaker, with a different direction from that of its panned low-frequency counterpart. Listening tests are conducted to investigate the localization and quality of the source in the case that frequencies higher than 1.5 kHz are reproduced from a different direction than the low frequencies. In this context, the human ability to discriminate the spatial direction of low/high frequency bands and the error in the perceived direction of arrival for different separation angles is evaluated and quantified. The resulting data has been analyzed with ANOVA, providing significant results that allow us to establish a threshold in the angular separation of the high and low frequency parts where subjects do not perceive source location artifacts. The term just noticeable band splitting angle (JNBSA) is defined and introduced. It represents the minimum angle of separation between high and low frequencies from which the listener starts to perceive artifacts in the reproduction of a sound source using loudspeakers., The Spanish Ministry of Economy, Industry and Competitiveness supported this work within the framework of the TEC2015-68076-R and RTI2018-097045-B-C22 projects, as well as the Aalto Science Institute with a visiting professor grant. The authors also thank Sakari Tervo for the support in the experimental procedure, and Philip W. Robinson for the suggestion of bibliographic references.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sonic Crystals Acoustic Screens and Diffusers

  • Peiró-Torres, María Del Pilar
  • Parrilla-Navarro, Manuel Jesús
  • Ferri García, Marcelino
  • Jose Maria Bravo|||0000-0002-8337-7385
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Redondo, Javier|||0000-0002-5507-7799
[EN] This article presents the use of advanced tools applied to the design of devices that can solve specific acoustic problems, improving the already existing devices based on classic technologies. Specifically, we have used two different configurations of a material called Sonic Crystals, which is formed by arrays of acoustic scatterers, to obtain acoustic screens with high diffusion properties by means of an optimization process. This design procedure has been carried out using a multiobjective evolutionary algorithm along to an acoustic simulation model developed with the numerical method called Finite Difference Time Domain. The results obtained are discussed in terms of both the acoustic performance and the robustness of the devices achieved., This work was partially supported by the Spanish "Ministerio de Economia y Competitividad" under the project TEC2015-68076-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The method of fundamental solutions for the analysis of infinite 3D sonic crystals

  • Godinho, Luis
  • Amado-Mendes, P.
  • Redondo, Javier|||0000-0002-5507-7799
[EN] The use of periodic structures in acoustic applications has interested the scientific community in the last two decades. Although in-depth research has been thoroughly performed, many issues have still not been solved. Computational analysis of sonic structures using realistic 3D models still poses significant problems, and most of the published results correspond to 2D problems. Analysing 3D problems of such structures using conventional methods demands large computational resources, which may be prohibitive. This paper proposes a new approach for such 3D problems making use of a highly efficient Method of Fundamental Solutions (MFS) approach to deal with sonic crystals made of 3D scatterers, infinitely repeated with constant spacing along one direction. The method makes use of a special form of the acoustic fundamental solutions which can be highly efficient in such analysis, while allowing just the cell that is repeated to be effectively modelled. Verification of the model is provided by first comparing its results with those from an ACA-MFS model. Results are compared with those from a FDTD algorithm, and a parametric study is presented revealing the 3D character of the computed responses, and evidencing the formation of acoustic band-gaps at specific frequency bands associated with the Bragg effect., The EU funding support in the scope of COST (European Cooperation in Science and Technology) through the COST ActionPlease check funding information and confirm its correctness. CA15125 - DENORMS: "Designs for Noise Reducing Materials and Structures" is here also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized sound diffusers based on sonic crystals using a multiobjective evolutionary algorithm

  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Vorlander, Michael
Sonic crystals have been demonstrated to be good candidates to substitute for conventional diffusers in order to overcome the need for extremely thick structures when low frequencies have to be scattered, however, their performance is limited to a narrow band. In this work, multiobjective evolutionary algorithms are used to extend the bandwidth to the whole low frequency range. The results show that diffusion can be significantly increased. Several cost functions are considered in the paper, on the one hand to illustrate the flexibility of the optimization and on the other hand to demonstrate the problems associated with the use of certain cost functions. A study of the robustness of the optimized diffusers is also presented, introducing a parameter that can help to choose among the best candidates. Finally, the advantages of the use of multiobjective optimization in comparison with conventional optimizations are discussed., This work was partially supported by the Spanish "Ministerio de Economia y Competitividad" under the projects TEC2015-68076-R and DPI2015-71443-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative study of simulation methods for the quantification of the acoustic insulation provided by periodic structures

  • Parrilla-Navarro, Manuel Jesús
  • Peiró-Torres, María Del Pilar
  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
[EN] Nowadays there are different available methods to perform simulations in acoustics. The suitability of them strongly depends on the system studied in each case. In the present work, a comparison between different methods (Multiple Scattering, Finite Elements Method and Finite Difference Time Domain) is carried out particularized to the quantification of the isolation provided by periodic structures (Sonic crystals). It has been considered a systematic study about computational time, precision and computational cost., [ES] Actualmente existen diferentes métodos para realizar simulaciones acústicas. La conveniencia de utilizar un método u otro depende del sistema que se estudia en cada caso. En este trabajo se realiza una comparativa entre diferentes métodos (Múltiple Scattering, Método de Elementos Finitos y Método de Diferencias Finitas en el Dominio del Tiempo) aplicados a la cuantificación del aislamiento proporcionado por estructuras periódicas (cristales de sonido). Se considera un estudio sistemático sobre tiempo computacional, la precisión y el coste computacional., This work was partially supported by the Spanish “MINISTERIO DE ECONOMIA, INDUSTRIA Y COMPETITIVIDAD” under the project TEC2015-68076-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perception of nonlinear distortion on emulation of frequency responses of headphones

  • Gutiérrez-Parera, Pablo|||0000-0002-5349-5698
  • López Monfort, José Javier|||0000-0001-6884-5577
[EN] The equalization of headphones can force transducers to work in a non-linear condition, producing non-linear distortion. Depending on the headphone model and the reproduction level, that distortion can be audible. In this study, headphones of diverse quality and price were compelled to emulate the same target frequency response and the non-linear distortion was measured. A Diagonal Volterra model was used to simulate the different headphones with and without distortion. A perceptual test was carried out to determine the level of reproduction above which non-linear distortion is perceived for each headphone model. High correlation has been found between the level of detected distortion and retail prices of headphones., The Spanish Ministry of Economy, Industry and Competitiveness supported this work under the project TEC2015-68076-R and Grant No. BES-2013-065034.