Pasar al contenido principal

SIMULACION NUMERICA Y VALIDACION EXPERIMENTAL DE FENOMENOS DE CAMBIO DE FASE LIQUIDO-VAPOR. APLICACION A SISTEMAS Y EQUIPOS TERMICOS (II)

ENE2011-28699

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Parametric study of two-tank TES systems for CSP plants

  • Torras Ortiz, Santiago|||0000-0001-5014-7383
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The two-tank thermal energy storage (TES) system is the most used technology for storage in concentrating solar power (CSP) plants. This work focuses on a parametric study, which aims to identify the most important parameters on TES system, in order to improve the design and increase the performance of the plant. Three parameters have been considered: meteorological data, insulation thickness of the storage tank, and configuration of the foundation of the storage tank. The effect of each parameter is evaluated using numerical simulations based on a modular object-oriented methodology. The main issues related to the mathematical models and its numerical methodology are also presented in this paper., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A level-set aided single-phase model for the numerical simulation of free-surface flow on unstructured meshes

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Oliva Llena, Asensio|||0000-0002-2805-4794
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A new single-phase scheme for the numerical simulation of free-surface problems on 3-D unstructured meshes is presented. The flow field is obtained from the discrete solution of the incompressible Navier-Stokes equations, whereas a conservative level-set method is employed to capture fluid interfaces on an Eulerian approach. The scheme is based on a novel treatment of the interface for the deactivation of the light phase, allowing an optimization of the classic two-phase model for the cases in which the influence of the lighter phase is negligible. The deactivation is performed by directly imposing the appropriate pressure at the surface boundary, and, unlike similar approaches, without the need to treat near-interface velocities. The method is validated against various analytical and experimental references, demonstrating its potential on both hexahedral and unstructured meshes. Moreover, it shows higher numerical stability in comparison to two-phase solvers, as well as significant advantages in terms of computational performance., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical evaluation of multi-layered solid-PCM thermocline-like tanks as thermal energy storage systems for CSP applications

  • Galione Klot, Pedro Andrés
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Torras Ortiz, Santiago|||0000-0001-5014-7383
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
The two-tank system is the technology used for thermal energy storage (TES) in current concentrating solar power (CSP) plants. Thermocline storage concept has been considered for more than a decade as a possible solution to reduce the high cost of the storage system in these plants. In previous works, multi-layered solid-PCM (MLSPCM) thermocline-like storage tank configurations has been introduced and studied, giving promising results for their use as thermal energy storage systems for CSP. In this work, further analysis is performed in the use of this new concept of TES, by considering variable inlet conditions, and simulating the tank shell and the foundation. The numerical simulations are based on a modular object-oriented methodology. Energetic and exergetic results are presented and compared against a reference 2-tank case and against different thermocline configurations with either solid or phase change filler materials. Again, promising results are obtained for the tested MLSPCM concept., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical evaluation of multi-layered solid-PCM thermocline-like tanks as thermal energy storage systems for CSP applications

  • Galione Klot, Pedro Andrés
  • Pérez Segarra, Carlos David
  • Rodríguez Pérez, Ivette María
  • Torras Ortiz, Santiago
  • Rigola Serrano, Joaquim
The two-tank system is the technology used for thermal energy storage (TES) in current concentrating solar power (CSP) plants. Thermocline storage concept has been considered for more than a decade as a possible solution to reduce the high cost of the storage system in these plants. In previous works, multi-layered solid-PCM (MLSPCM) thermocline-like storage tank configurations has been introduced and studied, giving promising results for their use as thermal energy storage systems for CSP. In this work, further analysis is performed in the use of this new concept of TES, by considering variable inlet conditions, and simulating the tank shell and the foundation. The numerical simulations are based on a modular object-oriented methodology. Energetic and exergetic results are presented and compared against a reference 2-tank case and against different thermocline configurations with either solid or phase change filler materials. Again, promising results are obtained for the tested MLSPCM concept., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Parametric study of two-tank TES systems for CSP plants

  • Torras Ortiz, Santiago
  • Pérez Segarra, Carlos David
  • Rodríguez Pérez, Ivette María
  • Rigola Serrano, Joaquim
  • Oliva Llena, Asensio
The two-tank thermal energy storage (TES) system is the most used technology for storage in concentrating solar power (CSP) plants. This work focuses on a parametric study, which aims to identify the most important parameters on TES system, in order to improve the design and increase the performance of the plant. Three parameters have been considered: meteorological data, insulation thickness of the storage tank, and configuration of the foundation of the storage tank. The effect of each parameter is evaluated using numerical simulations based on a modular object-oriented methodology. The main issues related to the mathematical models and its numerical methodology are also presented in this paper., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A level-set aided single-phase model for the numerical simulation of free-surface flow on unstructured meshes

  • Schillaci, Eugenio
  • Jofre Cruanyes, Lluís
  • Balcázar Arciniega, Néstor
  • Lehmkuhl Barba, Oriol
  • Oliva Llena, Asensio
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A new single-phase scheme for the numerical simulation of free-surface problems on 3-D unstructured meshes is presented. The flow field is obtained from the discrete solution of the incompressible Navier-Stokes equations, whereas a conservative level-set method is employed to capture fluid interfaces on an Eulerian approach. The scheme is based on a novel treatment of the interface for the deactivation of the light phase, allowing an optimization of the classic two-phase model for the cases in which the influence of the lighter phase is negligible. The deactivation is performed by directly imposing the appropriate pressure at the surface boundary, and, unlike similar approaches, without the need to treat near-interface velocities. The method is validated against various analytical and experimental references, demonstrating its potential on both hexahedral and unstructured meshes. Moreover, it shows higher numerical stability in comparison to two-phase solvers, as well as significant advantages in terms of computational performance., Peer Reviewed, Postprint (author's final draft)