Pasar al contenido principal

DESARROLLO DE CODIGOS Y ALGORITMOS PARALELOS DE ALTAS PRESTACIONES PARA LA MEJORA DE LA EFICIENCIA EN LOS SECTORES EOLICO, SOLARTERMICO Y EDIFICACION

ENE2014-60577-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Parallel mesh multiplication and adaptation technique for turbulent flow simulation using unstructured meshes

  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Borrell Pol, Ricard
  • Oliet Casasayas, Carles|||0000-0003-2170-5299
  • Oliva Llena, Asensio|||0000-0002-2805-4794
In this paper, we report the development of a parallel mesh multiplication code to subdivide a base mesh (containing tetrahedral, pyramids, prisms or hexahedral) into a finer mesh without user intervention, taking care of the quality of refined meshes generated by the algorithm. First, a coarse mesh is generated with an unstructured mesh generator and subdivided to the level of resolution needed for the simulation. On the refinement process of tetrahedral elements, geometrical properties are taking into account in order to preserve the shape quality of the subdivided elements. Then, the mesh is conformed on the solid surfaces to the original geometry, since linear subdivision ignores surface curvatures, and interior points of the mesh are adapted using Radial Basis functions, due to the surface correction. Moreover, a smoothing algorithm for tetrahedral mesh is applied to improve the mesh quality according to element geometry metric or based in minimize numerical errors in the CFD solution computed with unstructured meshes. Finally, the applicability of this method is shown on the numerical simulation of the turbulent flow over an Ahmed car at Reh = 7.68 × 10e5., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

New parallel method for adjacent disconnected unstructured 3D meshes

  • Muela Castro, Jordi|||0000-0003-1583-8490
  • Martínez Valdivieso, Daniel
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Oliva Llena, Asensio|||0000-0002-2805-4794
A new parallel method for simulations with non-overlapping disconnected mesh domains but adjacent boundaries is presented and studied. This technique allows simulations using 3D unstructured meshes that are independent., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An energy-preserving level set method for multiphase flows

  • Valle Marchante, Nicolás|||0000-0003-2140-041X
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Castro González, Jesús|||0000-0002-8943-2402
The computation of multiphase flows presents a subtle energetic equilibrium between potential (i.e., surface) and kinetic energies. The use of traditional interface-capturing schemes provides no control over such a dynamic balance. In the spirit of the well-known symmetry-preserving and mimetic schemes, whose physics-compatible discretizations rely upon preserving the underlying mathematical structures of the space, we identify the corresponding structure and propose a new discretization strategy for curvature. The new scheme ensures conservation of mechanical energy (i.e., surface plus kinetic) up to temporal integration. Inviscid numerical simulations are performed to show the robustness of such a method., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A low-dissipation convection scheme for the stable discretization of turbulent interfacial flow

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Oliva Llena, Asensio|||0000-0002-2805-4794
© 2017. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper analyzes a low-dissipation discretization for the resolution of immiscible, incompressible multiphase flow by means of interface-capturing schemes. The discretization is built on a three-dimensional, unstructured finite-volume framework and aims at minimizing the differences in kinetic energy preservation with respect to the continuous governing equations. This property plays a fundamental role in the case of flows presenting significant levels of turbulence. At the same time, the hybrid form of the convective operator proposed in this work incorporates localized low-dispersion characteristics to limit the growth of spurious flow solutions. The low-dissipation discrete framework is presented in detail and, in order to expose the advantages with respect to commonly used methodologies, its conservation properties and accuracy are extensively studied, both theoretically and numerically. Numerical tests are performed by considering a three-dimensional vortex, an exact sinusoidal function, and a spherical drop subjected to surface tension forces in equilibrium and immersed in a swirling velocity field. Finally, the turbulent atomization of a liquid-gas jet is numerically analyzed to further assess the capabilities of the method., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fine-scale dynamics in turbulent Rayleigh-Bénard convection

  • Dabbagh, Firas|||0000-0001-8440-507X
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Gorobets, Andrei
  • Oliva Llena, Asensio|||0000-0002-2805-4794
Small-scale universal features captured normally in many turbulent flows have been reviewed in Rayleigh-Bénard convection. Namely, dynamical Lagrangian representations of the velocity gradient tensor invariants have displayed the so-called “tearing drop” spiraling feature within the bulk region. Furthermore, essential common aspects as the asymmetric alignment of vorticity with the vortex-stretching vector, and the preferential alignment between vorticity and the intermediate eigenvector of the rate-of-strain tensor have been observed in that scope. Further and in more appropriate implement, we have performed a similar dynamical study of flow topology pertained to the traceless part of the gradient velocity-times-temperature tensor. The new invariants are related basically with the small-scale dynamics associated with the evolution of thermal plumes and buoyant production. We find that a self-amplification of velocity derivatives developed at harder turbulent flow supports indirectly the local effects of vortex-stretching generation. Moreover, the averaged evolution of the new invariants have revealed a converging change towards two skew-symmetric origins at Rayleigh number equals to 1e8 but one zero-valued origin at 1e10., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A level-set aided single-phase model for the numerical simulation of free-surface flow on unstructured meshes

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Oliva Llena, Asensio|||0000-0002-2805-4794
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A new single-phase scheme for the numerical simulation of free-surface problems on 3-D unstructured meshes is presented. The flow field is obtained from the discrete solution of the incompressible Navier-Stokes equations, whereas a conservative level-set method is employed to capture fluid interfaces on an Eulerian approach. The scheme is based on a novel treatment of the interface for the deactivation of the light phase, allowing an optimization of the classic two-phase model for the cases in which the influence of the lighter phase is negligible. The deactivation is performed by directly imposing the appropriate pressure at the surface boundary, and, unlike similar approaches, without the need to treat near-interface velocities. The method is validated against various analytical and experimental references, demonstrating its potential on both hexahedral and unstructured meshes. Moreover, it shows higher numerical stability in comparison to two-phase solvers, as well as significant advantages in terms of computational performance., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Strategies for the heterogeneous execution of large-scale simulations on hybrid supercomputers

  • Álvarez Farré, Xavier|||0000-0002-1684-7658
  • Gorobets, Andrei
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
Massively-parallel devices of various architectures are being adopted by the newest supercomputers to overcome the actual power constraint in the context of the exascale challenge. This progress leads to an increasing hybridisation of HPC systems and makes the design of computing applications a rather complex problem. Therefore, the software e¿ciency and portability are of crucial importance. In this context of accelerated innovation, we developed the HPC2 (Heterogeneous Portable Code for HPC). It is a portable, algebra-based framework for heterogeneous computing with many potential applications in the ¿elds of computational physics and mathematics, such as modelling of incompressible turbulent ¿ows. In its application to CFD, the algorithm of the timeintegration phase relies on a reduced set of only three algebraic operations: the sparse matrix-vector product, the linear combination of vectors and the dot product. This algebraic approach combined with a multilevel MPI+OpenMP+OpenCL parallelisation naturally provides modularity and portability. In this work, we present the strategies for the e¿cient heterogeneous execution of large-scale simulations on hybrid supercomputers that are part of the HPC2 core. The performance is studied in detail for the major computing kernel, the sparse matrix-vector product, using a sparse matrix derived from a simulation on a hybrid unstructured mesh and up to 32 nodes of a hybrid CPU+GPU supercomputer.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large eddy simulation of a turbulent diffusion flame: some aspects of subgrid modelling consistency

  • Ventosa Molina, Jordi|||0000-0002-8276-5001
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Oliva Llena, Asensio|||0000-0002-2805-4794
This is a copy of the author 's final draft version of an article published in the journal Flow turbulence and combustion. The final publication is available at Springer via http://dx.doi.org/10.1007/s10494-017-9813-2, In the context of Large Eddy Simulation (LES) solely for the momentum transport equation there may be found several models for the turbulent subgrid fluxes. Furthermore, among those relying on the eddy diffusivity approach, each model may be based on different invariants of the strain rate. Besides, when heat and mass transfer are also considered, closures for the subgrid turbulent scalar fluxes are also required. Hence, different model combinations may be considered. Additionally, when other physical phenomena are included, such as combustion, further subgrid modelling is involved. Therefore, in the present study a LES simulation of a turbulent diffusion flame is performed and different combination of subgrid models are used in order to analyse the numerical effects in the simulations. Several models for the turbulent momentum subgrid fluxes are considered, both constant and dynamically evaluated Schmidt numbers. Regarding combustion, in the context of the Flamelet/Progress-Variable (FPV) model, with an assumed probability density function for the turbulent-chemistry interactions and four different closures for the subgrid mixture fraction variance are considered. Hence, a large number of model combinations are possible. The present study highlights the need for a consistent closure of subgrid effects. It is shown that, in the context of an FPV modelling, incorrect capture of subgrid mixing results in a flame lift-off for the studied flame (DLR A diffusion flame), even though experimentally an attached flame was reported. It is found that a consistent formulation is required, that is, all subgrid closures should become active in the same regions of the domain to avoid modelling inconsistencies. In contrast, when the classical flamelet approach is used, no lift-off is observed. The reason is that the classical flamelet includes only a limited subset of the possible flame states, i.e. only includes burning flamelets and extinguished flamelets for scalar dissipation rates past the extinction one., The present work has been financially supported by the Ministerio de Economía y Competitividad of the Spanish government through project ENE2014-60577-R. We would also like to thank the reviewers for their helpful comments which have led to an improved article. The authors declare that they have no conflict of interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the extension of RANS/LES methods from incom-pressible to compressible transonic turbulent flows with SBLI

  • Pedro Costa, Juan Bautista
  • Baez Vidal, Aleix|||0000-0003-4227-1768
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Oliva Llena, Asensio|||0000-0002-2805-4794
In the present work, a compressible extension of the incompressible RANS and LES models implemented in TermoFluids is carried out. The objective is to solve compressible turbulent flows, i.e. high-Reynolds and high-Mach flows, by means of turbulence modelling. Specifically, transonic turbulent flows where shock-boundary layer interaction (SBLI) is present are the main target due to its practical interest. With this idea in mind, several simulations of the Sajben’s transonic diffuser are presented., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Efficient CFD code implementation for the ARM-based Mont-Blanc architecture

  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
  • Borrell Pol, Ricard
  • Gorobets, Andrei
  • Mantovani, Filippo|||0000-0003-3559-4825
  • Oliva Llena, Asensio|||0000-0002-2805-4794
Since 2011, the European project Mont-Blanc has been focused on enabling ARM-based technology for HPC, developing both hardware platforms and system software. The latest Mont-Blanc prototypes use system-on-chip (SoC) devices that combine a CPU and a GPU sharing a common main memory. Specific developments of parallel computing software and well-suited implementation approaches are of crucial importance for such a heterogeneous architecture in order to efficiently exploit its potential. This paper is devoted to the optimizations carried out in the TermoFluids CFD code to efficiently run it on the Mont-Blanc system. The underlying numerical method is based on an unstructured finite-volume discretization of the Navier–Stokes equations for the numerical simulation of incompressible turbulent flows. It is implemented using a portable and modular operational approach based on a minimal set of linear algebra operations. An architecture-specific heterogeneous multilevel MPI+OpenMP+OpenCL implementation of such kernels is proposed. It includes optimizations of the storage formats, dynamic load balancing between the CPU and GPU devices and hiding of communication overheads by overlapping computations and data transfers. A detailed performance study shows time reductions of up to on the kernels’ execution with the new heterogeneous implementation, its scalability on up to 128 Mont-Blanc nodes and the energy savings (around ) achieved with the Mont-Blanc system versus the high-end hybrid supercomputer MinoTauro., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007–2013] and Horizon 2020 under the Mont-Blanc Project (www.montblanc-project.eu), grant agreement n 288777, 610402 and 671697. The work has been financially supported by the Ministerio de Ciencia e Innovación, Spain (ENE- 2014-60577-R), the Russian Science Foundation, project 15-11-30039, CONICYT Becas Chile Doctorado 2012, the Juan de la Cierva posdoctoral grant (IJCI-2014-21034), and the Initial Training Network SEDITRANS (GA number: 607394), implemented within the 7th Framework Programme of the European Commission under call FP7-PEOPLE- 2013-ITN. Our calculations have been performed on the resources of the Barcelona Supercomputing Center. The authors thankfully acknowledge these institutions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Towards a direct numerical simulation of a lifted CH4-air diffusion flame

  • Ventosa Molina, Jordi|||0000-0002-8276-5001
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Pérez Segarra, Carlos David|||0000-0003-1007-3142
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The near field jet of a self-igniting methane-air diffusion jet flame is studied by means of Direct Numerical Simulation (DNS) and a Flamelet/Progress-Variable (FPV) model to include detailed chemistry. Hence, all flow and transport scales are resolved and chemical reactions are assumed to take place in thin layers. Key aspects in the creation of the flamelet database, prior to the DNS simulation, are considered. Inclusion of differential diffusion effects are discussed by analysing the S-shaped curve and autoignition delay times. Similarly, the influence on these parameters of two detailed mechanism, the GRI2.11 and GRI3.0, is assessed. The definition of the progress-variable used in the FPV is analysed and a new definition is proposed. Results of the near jet, up to 20 jet diameters, are shown for the two detailed mechanism., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

HPC² - A fully-portable, algebra-based framework for heterogeneous computing. Application to CFD

  • Álvarez Farré, Xavier|||0000-0002-1684-7658
  • Gorobets, Andrei
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Borrell Pol, Ricard
  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
The variety of computing architectures competing in the exascale race makes the portability of codes of major importance. In this work, the HPC2 code is presented as a fully-portable, algebra-based framework suitable for heterogeneous computing. In its application to CFD, the algorithm of the time-integration phase relies on a reduced set of only three algebraic operations: the sparse matrix-vector product, the linear combination of vectors and the dot product. This algebraic approach combined with a multilevel MPI+OpenMP+OpenCL parallelization naturally provides portability. The performance has been studied on different architectures including multicore CPUs, Intel Xeon Phi accelerators and GPUs of AMD and NVIDIA. The multi-GPU scalability is demonstrated up to 256 devices. The heterogeneous execution is tested on a CPU+GPU hybrid cluster. Finally, results of the direct numerical simulation of a turbulent flow in a 3D air-filled differentially heated cavity are presented to show the capabilities of the HPC2 dealing with large-scale CFD simulations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Direct numerical simulation of multiphase flows with unstable interfaces

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Oliva Llena, Asensio|||0000-0002-2805-4794
Published under licence in Journal of Physics: Conference Series by IOP Publishing Ltd. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI., This paper presents a numerical model that intends to simulate efficiently the surface instability that arise in multiphase flows, typically liquid-gas, both for laminar or turbulent regimes. The model is developed on the in-house computing platform TermoFluids , and operates the finite-volume, direct numerical simulation (DNS) of multiphase flows by means of a conservative level-set method for the interface-capturing. The mesh size is optimized by means of an adaptive mesh refinement (AMR) strategy, that allows the dynamic re-concentration of the mesh in the vicinity of the interfaces between fluids, in order to correctly represent the diverse structures (as ligaments and droplets) that may rise from unstable phenomena. In addition, special attention is given to the discretization of the various terms of the momentum equations, to ensure stability of the flow and correct representation of turbulent vortices. As shown, the method is capable of truthfully simulate the interface phenomena as the Kelvin-Helmholtz instability and the Plateau-Rayleigh instability, both in the case of 2-D and 3-D configurations. Therefore it is suitable for the simulation of complex phenomena such as simulation of air-blast atomization, with several important application in the field of automotive and aerospace engines. A prove is given by our preliminary study of the 3-D coaxial liquid-gas jet., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A complete analysis of the heat, air and moisture transfer on building performance

  • Souaihi, Oussama
  • Lopez, Joan
  • Capdevila Paramio, Roser|||0000-0003-2569-2544
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The simulation of combined heat, air and moisture (HAM) is important to predict the indoor air quality and thermal comfort. Moreover, inappropriate levels of indoor humidity and temperature can contribute to a high movement of water vapor through the building walls, causing deterioration and reduction of the thermal insulation which leads to higher energy demand. The simulation of the buildings behavior can help to optimize the design of new or existing building, help better control the HVAC system and therefore results in energy efficient buildings. In this work, an in-house modular object-oriented tool (NEST) for the multiphysics simulation of buildings is presented. The whole building is modeled as a collection of basic elements (e.g., walls, rooms, openings, occupancy, HVAC system, solar radiation distributor, etc.). These elements can be modeled using different physical models and scales. A combined heat, air and moisture transfer model for the building envelopes and rooms have been implemented and validated with different benchmark cases. The in-house simulation tool has been used for the simulation of hygrothermal behavior of rooms inside different public buildings (residential apartments, hospital rooms, universities and school plants). The simulations allowed as the analysis of the humidity effect on thermal comfort and energy performance of the rooms., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Direct numerical simulation of a fully developed turbulent square duct flow up to Re-tau=1200

  • Zhang, Hao
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Gorobets, Andrei
  • Tan, Yuanqiang
  • Oliva Llena, Asensio|||0000-0002-2805-4794
Various fundamental studies based on a turbulent duct flow have gained popularity including heat transfer, magnetohydrodynamics as well as particle-laden transportation. An accurate prediction on the turbulent flow field is critical for these researches. However, the database of the mean flow and turbulence statistics is fairly insufficient due to the enormous cost of numerical simulation at high Reynolds number. This paper aims at providing available information by conducting several Direct Numerical Simulations (DNS) on turbulent duct flows at Re-tau = 300, 600, 900 and 1200. A quantitative comparison between current and previous DNS results was performed where a good agreement was achieved at Re-tau = 300. However, further comparisons of the present results with the previous DNS results at Re-tau = 600 obtained with much coarser meshes revealed some discrepancies which can be explained by the insufficient mesh resolution. At last, the mean flow and turbulent statistics at higher Re-tau was presented and the effect of Re-tau on the mean flow and flow dynamics was discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Building proper invariants for subgrid-scale eddy-viscosity models

  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Folch, David
  • Gorobets, Andrei
  • Oliva Llena, Asensio|||0000-0002-2805-4794
Since direct simulations of the incompressible Navier-Stokes equations are limited to relatively low-Reynolds numbers, dynamically less complex mathematical formulations are necessary for coarse-grain simulations. Eddy-viscosity models for Large-Eddy Simulation is probably the most popular example thereof: they rely on differential operators that should be able to capture well different flow configurations (laminar and 2D flows, near-wall behavior, transitional regime...). Most of them are based on the combination of invariants of a symmetric second-order tensor that is derived from the gradient of the resolved velocity field. In the present work, they are presented in a framework where all the models are represented as a combination of elements of a 5D phase space of invariants. In this way, new models can be constructed by imposing appropriate restrictions in this space. The performance of the proposed models is successfully tested for a turbulent channel flow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Effectiveness of adaptive mesh refinement strategies in the DNS of multiphase flows

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Oliva Llena, Asensio|||0000-0002-2805-4794
In this work, a finite-volume Adaptive Mesh Refinement (AMR) method for two phase flows able to dynamically achive the required mesh size in specific parts of the domain has been developed. The Navier-Stokes equations for incompressible flows are coupled to a robust conservative level-set method for the capture of the interface between the fluids. The effectiveness of the method has been firstly validated by simulating some known test-cases, as the vortex flow and the rising bubbles. Finally, it has been applied to a possible industrial application, the simulation of a jet injector., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Memory aware poisson solver for peta-scale simulations with one FFT diagonalizable direction

  • Oyarzun Altamirano, Guillermo|||0000-0001-9524-3782
  • Borrell Pol, Ricard
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Oliva Llena, Asensio|||0000-0002-2805-4794
Problems with some sort of divergence constraint are found in many disciplines: computational fluid dynamics, linear elasticity and electrostatics are examples thereof. Such a constraint leads to a Poisson equation which usually is one of the most computationally intensive parts of scientific simulation codes. In this work, we present a memory aware Poisson solver for problems with one Fourier diagonalizable direction. This diagonalization decomposes the original 3D system into a set of independent 2D subsystems. The proposed algorithm focuses on optimizing the memory allocations and transactions by taking into account redundancies on such 2D subsystems. Moreover, we also take advantage of the uniformity of the solver through the periodic direction for its vectorization. Additionally, our novel approach automatically optimizes the choice of the preconditioner used for the solution of each frequency subsystem and dynamically balances its parallel distribution. Altogether constitutes a highly efficient and robust HPC Poisson solver that has been successfully attested up to 16384 CPU-cores., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the solution of the problem of a drop falling against a plane by using a level set-moving mesh-immersed boundary method

  • Gutiérrez, Enrique
  • Favre, F.
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
© 2018 WIT Press, A coupled Conservative Level Set – Moving Mesh – Immersed Boundary method is formulated and validated against the three-dimensional gravity-driven falling drop problem. First, by employing Conservative Level-Set (CLS) method, the multiphase domain can be successfully handled, while the mass conservation is controlled. Then, by using an Arbitrary Lagrangian-Eulerian formulation (i.e. a moving mesh), the simulation domain can be optimized by reducing the domain size and by allowing an improved mesh, resulting in a computational resources saving. Finally, the use of an Immersed Boundary (IB) method allows to deal with intricate geometries. All these functionalities result in a versatile and robustness method to simulate bubbles/drops problems in complex geometries. The mentioned method was successfully used to thoroughly study the falling of a drop against a plane surface, providing detailed results including velocity evolution, mesh independence study, evolution of the vertical position of the drop, streamlines and vorticity fields, and profiles evolution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Turbulent flow around a square cylinder at Reynolds number 22,000: A DNS study

  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
  • Gorobets, Andrei
  • Oliva Llena, Asensio|||0000-0002-2805-4794
The turbulent flow around a square cylinder at Reynolds number 22,000 (based on the cylinder diameter and the inflow velocity) is studied by means of direct numerical simulation. An overview of the numerical methods and the methodology used to verify the simulation is presented with special emphasis to determine the proper domain size and time-integration period. Then, the time-averaged flow results and turbulent statistics are discussed together with available experimental data showing a fairly good agreement. Finally, frequency analysis of velocity samples is used to analyze both the Kelvin-Helmholtz vortical structures produced by the flow separation at the leading edge of the cylinder and the Von Karman vortex shedding in the wake region. The former are observed more downstream compared with the experiments suggesting that transition to turbulence may occur later. However, comparison of the turbulent statistics in the near wall region indicates that transition is being well captured., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A complete analysis of the heat, air and moisture transfer on building performance

  • Souaihi, Oussama
  • Lopez, Joan
  • Capdevila Paramio, Roser
  • Rigola Serrano, Joaquim
  • Lehmkuhl Barba, Oriol
  • Oliva Llena, Asensio
The simulation of combined heat, air and moisture (HAM) is important to predict the indoor air quality and thermal comfort. Moreover, inappropriate levels of indoor humidity and temperature can contribute to a high movement of water vapor through the building walls, causing deterioration and reduction of the thermal insulation which leads to higher energy demand. The simulation of the buildings behavior can help to optimize the design of new or existing building, help better control the HVAC system and therefore results in energy efficient buildings. In this work, an in-house modular object-oriented tool (NEST) for the multiphysics simulation of buildings is presented. The whole building is modeled as a collection of basic elements (e.g., walls, rooms, openings, occupancy, HVAC system, solar radiation distributor, etc.). These elements can be modeled using different physical models and scales. A combined heat, air and moisture transfer model for the building envelopes and rooms have been implemented and validated with different benchmark cases. The in-house simulation tool has been used for the simulation of hygrothermal behavior of rooms inside different public buildings (residential apartments, hospital rooms, universities and school plants). The simulations allowed as the analysis of the humidity effect on thermal comfort and energy performance of the rooms., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the extension of RANS/LES methods from incom-pressible to compressible transonic turbulent flows with SBLI

  • Pedro Costa, Juan Bautista
  • Baez Vidal, Aleix
  • Lehmkuhl Barba, Oriol
  • Pérez Segarra, Carlos David
  • Oliva Llena, Asensio
In the present work, a compressible extension of the incompressible RANS and LES models implemented in TermoFluids is carried out. The objective is to solve compressible turbulent flows, i.e. high-Reynolds and high-Mach flows, by means of turbulence modelling. Specifically, transonic turbulent flows where shock-boundary layer interaction (SBLI) is present are the main target due to its practical interest. With this idea in mind, several simulations of the Sajben’s transonic diffuser are presented., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An energy-preserving level set method for multiphase flows

  • Valle Marchante, Nicolás
  • Trias Miquel, Francesc Xavier
  • Castro González, Jesús
The computation of multiphase flows presents a subtle energetic equilibrium between potential (i.e., surface) and kinetic energies. The use of traditional interface-capturing schemes provides no control over such a dynamic balance. In the spirit of the well-known symmetry-preserving and mimetic schemes, whose physics-compatible discretizations rely upon preserving the underlying mathematical structures of the space, we identify the corresponding structure and propose a new discretization strategy for curvature. The new scheme ensures conservation of mechanical energy (i.e., surface plus kinetic) up to temporal integration. Inviscid numerical simulations are performed to show the robustness of such a method., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Parallel mesh multiplication and adaptation technique for turbulent flow simulation using unstructured meshes

  • Antepara Zambrano, Óscar
  • Lehmkuhl Barba, Oriol
  • Borrell Pol, Ricard
  • Oliet Casasayas, Carles
  • Oliva Llena, Asensio
In this paper, we report the development of a parallel mesh multiplication code to subdivide a base mesh (containing tetrahedral, pyramids, prisms or hexahedral) into a finer mesh without user intervention, taking care of the quality of refined meshes generated by the algorithm. First, a coarse mesh is generated with an unstructured mesh generator and subdivided to the level of resolution needed for the simulation. On the refinement process of tetrahedral elements, geometrical properties are taking into account in order to preserve the shape quality of the subdivided elements. Then, the mesh is conformed on the solid surfaces to the original geometry, since linear subdivision ignores surface curvatures, and interior points of the mesh are adapted using Radial Basis functions, due to the surface correction. Moreover, a smoothing algorithm for tetrahedral mesh is applied to improve the mesh quality according to element geometry metric or based in minimize numerical errors in the CFD solution computed with unstructured meshes. Finally, the applicability of this method is shown on the numerical simulation of the turbulent flow over an Ahmed car at Reh = 7.68 × 10e5., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fine-scale dynamics in turbulent Rayleigh-Bénard convection

  • Dabbagh, Firas
  • Trias Miquel, Francesc Xavier
  • Gorobets, Andrei
  • Oliva Llena, Asensio
Small-scale universal features captured normally in many turbulent flows have been reviewed in Rayleigh-Bénard convection. Namely, dynamical Lagrangian representations of the velocity gradient tensor invariants have displayed the so-called “tearing drop” spiraling feature within the bulk region. Furthermore, essential common aspects as the asymmetric alignment of vorticity with the vortex-stretching vector, and the preferential alignment between vorticity and the intermediate eigenvector of the rate-of-strain tensor have been observed in that scope. Further and in more appropriate implement, we have performed a similar dynamical study of flow topology pertained to the traceless part of the gradient velocity-times-temperature tensor. The new invariants are related basically with the small-scale dynamics associated with the evolution of thermal plumes and buoyant production. We find that a self-amplification of velocity derivatives developed at harder turbulent flow supports indirectly the local effects of vortex-stretching generation. Moreover, the averaged evolution of the new invariants have revealed a converging change towards two skew-symmetric origins at Rayleigh number equals to 1e8 but one zero-valued origin at 1e10., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A low-dissipation convection scheme for the stable discretization of turbulent interfacial flow

  • Schillaci, Eugenio
  • Jofre Cruanyes, Lluís
  • Balcázar Arciniega, Néstor
  • Antepara Zambrano, Óscar
  • Oliva Llena, Asensio
© 2017. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper analyzes a low-dissipation discretization for the resolution of immiscible, incompressible multiphase flow by means of interface-capturing schemes. The discretization is built on a three-dimensional, unstructured finite-volume framework and aims at minimizing the differences in kinetic energy preservation with respect to the continuous governing equations. This property plays a fundamental role in the case of flows presenting significant levels of turbulence. At the same time, the hybrid form of the convective operator proposed in this work incorporates localized low-dispersion characteristics to limit the growth of spurious flow solutions. The low-dissipation discrete framework is presented in detail and, in order to expose the advantages with respect to commonly used methodologies, its conservation properties and accuracy are extensively studied, both theoretically and numerically. Numerical tests are performed by considering a three-dimensional vortex, an exact sinusoidal function, and a spherical drop subjected to surface tension forces in equilibrium and immersed in a swirling velocity field. Finally, the turbulent atomization of a liquid-gas jet is numerically analyzed to further assess the capabilities of the method., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Building proper invariants for subgrid-scale eddy-viscosity models

  • Trias Miquel, Francesc Xavier
  • Folch, David
  • Gorobets, Andrei
  • Oliva Llena, Asensio
Since direct simulations of the incompressible Navier-Stokes equations are limited to relatively low-Reynolds numbers, dynamically less complex mathematical formulations are necessary for coarse-grain simulations. Eddy-viscosity models for Large-Eddy Simulation is probably the most popular example thereof: they rely on differential operators that should be able to capture well different flow configurations (laminar and 2D flows, near-wall behavior, transitional regime...). Most of them are based on the combination of invariants of a symmetric second-order tensor that is derived from the gradient of the resolved velocity field. In the present work, they are presented in a framework where all the models are represented as a combination of elements of a 5D phase space of invariants. In this way, new models can be constructed by imposing appropriate restrictions in this space. The performance of the proposed models is successfully tested for a turbulent channel flow., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct numerical simulation of a fully developed turbulent square duct flow up to Re-tau=1200

  • Zhang, Hao
  • Trias Miquel, Francesc Xavier
  • Gorobets, Andrei
  • Tan, Yuanqiang
  • Oliva Llena, Asensio
Various fundamental studies based on a turbulent duct flow have gained popularity including heat transfer, magnetohydrodynamics as well as particle-laden transportation. An accurate prediction on the turbulent flow field is critical for these researches. However, the database of the mean flow and turbulence statistics is fairly insufficient due to the enormous cost of numerical simulation at high Reynolds number. This paper aims at providing available information by conducting several Direct Numerical Simulations (DNS) on turbulent duct flows at Re-tau = 300, 600, 900 and 1200. A quantitative comparison between current and previous DNS results was performed where a good agreement was achieved at Re-tau = 300. However, further comparisons of the present results with the previous DNS results at Re-tau = 600 obtained with much coarser meshes revealed some discrepancies which can be explained by the insufficient mesh resolution. At last, the mean flow and turbulent statistics at higher Re-tau was presented and the effect of Re-tau on the mean flow and flow dynamics was discussed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Efficient CFD code implementation for the ARM-based Mont-Blanc architecture

  • Oyarzun Altamirano, Guillermo
  • Borrell Pol, Ricard
  • Gorobets, Andrei
  • Mantovani, Filippo
  • Oliva Llena, Asensio
Since 2011, the European project Mont-Blanc has been focused on enabling ARM-based technology for HPC, developing both hardware platforms and system software. The latest Mont-Blanc prototypes use system-on-chip (SoC) devices that combine a CPU and a GPU sharing a common main memory. Specific developments of parallel computing software and well-suited implementation approaches are of crucial importance for such a heterogeneous architecture in order to efficiently exploit its potential. This paper is devoted to the optimizations carried out in the TermoFluids CFD code to efficiently run it on the Mont-Blanc system. The underlying numerical method is based on an unstructured finite-volume discretization of the Navier–Stokes equations for the numerical simulation of incompressible turbulent flows. It is implemented using a portable and modular operational approach based on a minimal set of linear algebra operations. An architecture-specific heterogeneous multilevel MPI+OpenMP+OpenCL implementation of such kernels is proposed. It includes optimizations of the storage formats, dynamic load balancing between the CPU and GPU devices and hiding of communication overheads by overlapping computations and data transfers. A detailed performance study shows time reductions of up to on the kernels’ execution with the new heterogeneous implementation, its scalability on up to 128 Mont-Blanc nodes and the energy savings (around ) achieved with the Mont-Blanc system versus the high-end hybrid supercomputer MinoTauro., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007–2013] and Horizon 2020 under the Mont-Blanc Project (www.montblanc-project.eu), grant agreement n 288777, 610402 and 671697. The work has been financially supported by the Ministerio de Ciencia e Innovación, Spain (ENE- 2014-60577-R), the Russian Science Foundation, project 15-11-30039, CONICYT Becas Chile Doctorado 2012, the Juan de la Cierva posdoctoral grant (IJCI-2014-21034), and the Initial Training Network SEDITRANS (GA number: 607394), implemented within the 7th Framework Programme of the European Commission under call FP7-PEOPLE- 2013-ITN. Our calculations have been performed on the resources of the Barcelona Supercomputing Center. The authors thankfully acknowledge these institutions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the solution of the problem of a drop falling against a plane by using a level set-moving mesh-immersed boundary method

  • Gutiérrez, Enrique
  • Favre, F.
  • Balcázar Arciniega, Néstor
  • Rigola Serrano, Joaquim
© 2018 WIT Press, A coupled Conservative Level Set – Moving Mesh – Immersed Boundary method is formulated and validated against the three-dimensional gravity-driven falling drop problem. First, by employing Conservative Level-Set (CLS) method, the multiphase domain can be successfully handled, while the mass conservation is controlled. Then, by using an Arbitrary Lagrangian-Eulerian formulation (i.e. a moving mesh), the simulation domain can be optimized by reducing the domain size and by allowing an improved mesh, resulting in a computational resources saving. Finally, the use of an Immersed Boundary (IB) method allows to deal with intricate geometries. All these functionalities result in a versatile and robustness method to simulate bubbles/drops problems in complex geometries. The mentioned method was successfully used to thoroughly study the falling of a drop against a plane surface, providing detailed results including velocity evolution, mesh independence study, evolution of the vertical position of the drop, streamlines and vorticity fields, and profiles evolution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Strategies for the heterogeneous execution of large-scale simulations on hybrid supercomputers

  • Álvarez Farré, Xavier
  • Gorobets, Andrei
  • Trias Miquel, Francesc Xavier
Massively-parallel devices of various architectures are being adopted by the newest supercomputers to overcome the actual power constraint in the context of the exascale challenge. This progress leads to an increasing hybridisation of HPC systems and makes the design of computing applications a rather complex problem. Therefore, the software e¿ciency and portability are of crucial importance. In this context of accelerated innovation, we developed the HPC2 (Heterogeneous Portable Code for HPC). It is a portable, algebra-based framework for heterogeneous computing with many potential applications in the ¿elds of computational physics and mathematics, such as modelling of incompressible turbulent ¿ows. In its application to CFD, the algorithm of the timeintegration phase relies on a reduced set of only three algebraic operations: the sparse matrix-vector product, the linear combination of vectors and the dot product. This algebraic approach combined with a multilevel MPI+OpenMP+OpenCL parallelisation naturally provides modularity and portability. In this work, we present the strategies for the e¿cient heterogeneous execution of large-scale simulations on hybrid supercomputers that are part of the HPC2 core. The performance is studied in detail for the major computing kernel, the sparse matrix-vector product, using a sparse matrix derived from a simulation on a hybrid unstructured mesh and up to 32 nodes of a hybrid CPU+GPU supercomputer., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Effectiveness of adaptive mesh refinement strategies in the DNS of multiphase flows

  • Schillaci, Eugenio
  • Antepara Zambrano, Óscar
  • Lehmkuhl Barba, Oriol
  • Balcázar Arciniega, Néstor
  • Oliva Llena, Asensio
In this work, a finite-volume Adaptive Mesh Refinement (AMR) method for two phase flows able to dynamically achive the required mesh size in specific parts of the domain has been developed. The Navier-Stokes equations for incompressible flows are coupled to a robust conservative level-set method for the capture of the interface between the fluids. The effectiveness of the method has been firstly validated by simulating some known test-cases, as the vortex flow and the rising bubbles. Finally, it has been applied to a possible industrial application, the simulation of a jet injector., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct numerical simulation of multiphase flows with unstable interfaces

  • Schillaci, Eugenio
  • Lehmkuhl Barba, Oriol
  • Antepara Zambrano, Óscar
  • Oliva Llena, Asensio
Published under licence in Journal of Physics: Conference Series by IOP Publishing Ltd. Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI., This paper presents a numerical model that intends to simulate efficiently the surface instability that arise in multiphase flows, typically liquid-gas, both for laminar or turbulent regimes. The model is developed on the in-house computing platform TermoFluids , and operates the finite-volume, direct numerical simulation (DNS) of multiphase flows by means of a conservative level-set method for the interface-capturing. The mesh size is optimized by means of an adaptive mesh refinement (AMR) strategy, that allows the dynamic re-concentration of the mesh in the vicinity of the interfaces between fluids, in order to correctly represent the diverse structures (as ligaments and droplets) that may rise from unstable phenomena. In addition, special attention is given to the discretization of the various terms of the momentum equations, to ensure stability of the flow and correct representation of turbulent vortices. As shown, the method is capable of truthfully simulate the interface phenomena as the Kelvin-Helmholtz instability and the Plateau-Rayleigh instability, both in the case of 2-D and 3-D configurations. Therefore it is suitable for the simulation of complex phenomena such as simulation of air-blast atomization, with several important application in the field of automotive and aerospace engines. A prove is given by our preliminary study of the 3-D coaxial liquid-gas jet., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

New parallel method for adjacent disconnected unstructured 3D meshes

  • Muela Castro, Jordi
  • Martínez Valdivieso, Daniel
  • Lehmkuhl Barba, Oriol
  • Pérez Segarra, Carlos David
  • Oliva Llena, Asensio
A new parallel method for simulations with non-overlapping disconnected mesh domains but adjacent boundaries is presented and studied. This technique allows simulations using 3D unstructured meshes that are independent., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards a direct numerical simulation of a lifted CH4-air diffusion flame

  • Ventosa Molina, Jordi
  • Lehmkuhl Barba, Oriol
  • Pérez Segarra, Carlos David
  • Oliva Llena, Asensio
The near field jet of a self-igniting methane-air diffusion jet flame is studied by means of Direct Numerical Simulation (DNS) and a Flamelet/Progress-Variable (FPV) model to include detailed chemistry. Hence, all flow and transport scales are resolved and chemical reactions are assumed to take place in thin layers. Key aspects in the creation of the flamelet database, prior to the DNS simulation, are considered. Inclusion of differential diffusion effects are discussed by analysing the S-shaped curve and autoignition delay times. Similarly, the influence on these parameters of two detailed mechanism, the GRI2.11 and GRI3.0, is assessed. The definition of the progress-variable used in the FPV is analysed and a new definition is proposed. Results of the near jet, up to 20 jet diameters, are shown for the two detailed mechanism., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Memory aware poisson solver for peta-scale simulations with one FFT diagonalizable direction

  • Oyarzun Altamirano, Guillermo
  • Borrell Pol, Ricard
  • Trias Miquel, Francesc Xavier
  • Oliva Llena, Asensio
Problems with some sort of divergence constraint are found in many disciplines: computational fluid dynamics, linear elasticity and electrostatics are examples thereof. Such a constraint leads to a Poisson equation which usually is one of the most computationally intensive parts of scientific simulation codes. In this work, we present a memory aware Poisson solver for problems with one Fourier diagonalizable direction. This diagonalization decomposes the original 3D system into a set of independent 2D subsystems. The proposed algorithm focuses on optimizing the memory allocations and transactions by taking into account redundancies on such 2D subsystems. Moreover, we also take advantage of the uniformity of the solver through the periodic direction for its vectorization. Additionally, our novel approach automatically optimizes the choice of the preconditioner used for the solution of each frequency subsystem and dynamically balances its parallel distribution. Altogether constitutes a highly efficient and robust HPC Poisson solver that has been successfully attested up to 16384 CPU-cores., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A level-set aided single-phase model for the numerical simulation of free-surface flow on unstructured meshes

  • Schillaci, Eugenio
  • Jofre Cruanyes, Lluís
  • Balcázar Arciniega, Néstor
  • Lehmkuhl Barba, Oriol
  • Oliva Llena, Asensio
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A new single-phase scheme for the numerical simulation of free-surface problems on 3-D unstructured meshes is presented. The flow field is obtained from the discrete solution of the incompressible Navier-Stokes equations, whereas a conservative level-set method is employed to capture fluid interfaces on an Eulerian approach. The scheme is based on a novel treatment of the interface for the deactivation of the light phase, allowing an optimization of the classic two-phase model for the cases in which the influence of the lighter phase is negligible. The deactivation is performed by directly imposing the appropriate pressure at the surface boundary, and, unlike similar approaches, without the need to treat near-interface velocities. The method is validated against various analytical and experimental references, demonstrating its potential on both hexahedral and unstructured meshes. Moreover, it shows higher numerical stability in comparison to two-phase solvers, as well as significant advantages in terms of computational performance., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large eddy simulation of a turbulent diffusion flame: some aspects of subgrid modelling consistency

  • Ventosa Molina, Jordi
  • Lehmkuhl Barba, Oriol
  • Pérez Segarra, Carlos David
  • Oliva Llena, Asensio
This is a copy of the author 's final draft version of an article published in the journal Flow turbulence and combustion. The final publication is available at Springer via http://dx.doi.org/10.1007/s10494-017-9813-2, In the context of Large Eddy Simulation (LES) solely for the momentum transport equation there may be found several models for the turbulent subgrid fluxes. Furthermore, among those relying on the eddy diffusivity approach, each model may be based on different invariants of the strain rate. Besides, when heat and mass transfer are also considered, closures for the subgrid turbulent scalar fluxes are also required. Hence, different model combinations may be considered. Additionally, when other physical phenomena are included, such as combustion, further subgrid modelling is involved. Therefore, in the present study a LES simulation of a turbulent diffusion flame is performed and different combination of subgrid models are used in order to analyse the numerical effects in the simulations. Several models for the turbulent momentum subgrid fluxes are considered, both constant and dynamically evaluated Schmidt numbers. Regarding combustion, in the context of the Flamelet/Progress-Variable (FPV) model, with an assumed probability density function for the turbulent-chemistry interactions and four different closures for the subgrid mixture fraction variance are considered. Hence, a large number of model combinations are possible. The present study highlights the need for a consistent closure of subgrid effects. It is shown that, in the context of an FPV modelling, incorrect capture of subgrid mixing results in a flame lift-off for the studied flame (DLR A diffusion flame), even though experimentally an attached flame was reported. It is found that a consistent formulation is required, that is, all subgrid closures should become active in the same regions of the domain to avoid modelling inconsistencies. In contrast, when the classical flamelet approach is used, no lift-off is observed. The reason is that the classical flamelet includes only a limited subset of the possible flame states, i.e. only includes burning flamelets and extinguished flamelets for scalar dissipation rates past the extinction one., The present work has been financially supported by the Ministerio de Economía y Competitividad of the Spanish government through project ENE2014-60577-R. We would also like to thank the reviewers for their helpful comments which have led to an improved article. The authors declare that they have no conflict of interest., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

HPC² - A fully-portable, algebra-based framework for heterogeneous computing. Application to CFD

  • Álvarez Farré, Xavier
  • Gorobets, Andrei
  • Trias Miquel, Francesc Xavier
  • Borrell Pol, Ricard
  • Oyarzun Altamirano, Guillermo
The variety of computing architectures competing in the exascale race makes the portability of codes of major importance. In this work, the HPC2 code is presented as a fully-portable, algebra-based framework suitable for heterogeneous computing. In its application to CFD, the algorithm of the time-integration phase relies on a reduced set of only three algebraic operations: the sparse matrix-vector product, the linear combination of vectors and the dot product. This algebraic approach combined with a multilevel MPI+OpenMP+OpenCL parallelization naturally provides portability. The performance has been studied on different architectures including multicore CPUs, Intel Xeon Phi accelerators and GPUs of AMD and NVIDIA. The multi-GPU scalability is demonstrated up to 256 devices. The heterogeneous execution is tested on a CPU+GPU hybrid cluster. Finally, results of the direct numerical simulation of a turbulent flow in a 3D air-filled differentially heated cavity are presented to show the capabilities of the HPC2 dealing with large-scale CFD simulations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Turbulent flow around a square cylinder at Reynolds number 22,000: A DNS study

  • Trias Miquel, Francesc Xavier
  • Gorobets, Andrei
  • Oliva Llena, Asensio
The turbulent flow around a square cylinder at Reynolds number 22,000 (based on the cylinder diameter and the inflow velocity) is studied by means of direct numerical simulation. An overview of the numerical methods and the methodology used to verify the simulation is presented with special emphasis to determine the proper domain size and time-integration period. Then, the time-averaged flow results and turbulent statistics are discussed together with available experimental data showing a fairly good agreement. Finally, frequency analysis of velocity samples is used to analyze both the Kelvin-Helmholtz vortical structures produced by the flow separation at the leading edge of the cylinder and the Von Karman vortex shedding in the wake region. The former are observed more downstream compared with the experiments suggesting that transition to turbulence may occur later. However, comparison of the turbulent statistics in the near wall region indicates that transition is being well captured., Peer Reviewed, Postprint (author's final draft)