Pasar al contenido principal

DESARROLLO DE CATALIZADORES BASADOS EN GRAFENOS FUNCIONALIZADOS/DOPADOS Y NANOCOMPOSITES DE GRAFENO PARA CONVERSION ELECTROQUIMICA DE ENERGIA

ENE2014-52158-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the dendrimer generation used in the synthesis of Pt-Ru nanoparticles supported on carbon nanofibers on the catalytic activity towards methanol oxidation

  • Calderón Gómez, Juan Carlos
  • Calvillo Lamana, Laura
  • Lázaro Elorri, María Jesús
  • Rodríguez, José Luis
  • Pastor Tejera, Elena
Pt-Ru nanoparticles supported on carbon nanofibers (CNF) were synthesized by the sodium borohydride reduction method, using different generation dendrimers (zero, one, two and three generations). After the synthesis process, these materials were submitted to a heat treatment at 350 °C, in order to clean the nanoparticle surface of organic residues. TEM characterization showed that the Pt-Ru nanoparticles size ranged between 1.9 and 5.5 nm. The use of dendrimers did not totally avoid the formation of aggregates, although monodisperse sizes were observed. The heat treatment produces the desired surface cleaning, although promoted the formation of agglomerates and crystalline Ru oxides. The study of the electrochemical activity towards the methanol oxidation displayed some clues about the influence of both the dendrimer generation and the presence of Ru oxides. Moreover, the apparent activation energy <i>E<sub>ap</sub></i> for this reaction was determined. The results showed a beneficial effect of the heat treatment on the methanol oxidation current densities for the materials synthesized with the biggest dendrimers, being the methanol deprotonation and CO<sub>ad</sub> diffusion the predominant rate determining steps (<i>rds</i>)., We acknowledge support from the Unit of Information Resources for Research at the "Consejo Superior de Investigadciones Científicas" CSIC for the article-processing charges contribution., : This work was carried out with the support of Ministry of Economy and Competitiveness (MINECO) through the project ENE2014-52158-C2-2-R and 1-R (co-funded by FEDER). J.C.C. is indebted to the Alβan Program for the predoctoral fellowship No. E07D403742CO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen doped ordered mesoporous carbon as support of PtRu nanoparticles for methanol electro-oxidation

  • Sebastián del Río, David
  • Nieto-Monge, María Jesús
  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
The low oxidation kinetics of alcohols and the need for expensive platinum group metals are still some of the main drawbacks for the commercialization of energy efficient direct alcohol fuel cells. In this work, we investigate the influence of nitrogen doping of ordered mesoporous carbon (CMK) as support on the electrochemical activity of PtRu nanoparticles. Nitrogen doping procedures involve the utilization of pyrrole as both nitrogen and carbon precursor by means of a templating method using mesoporous silica. This method allows obtaining carbon supports with up to 14 wt. % nitrogen, with an effective introduction of pyridinic, pyrrolic and quaternary nitrogen. PtRu nanoparticles were deposited by sodium formate reduction method. The presence of nitrogen mainly influences the Pt:Ru atomic ratio at the near surface, passing from 50:50 on the bare (un-doped) CMK to 70:30 for the N-doped CMK catalyst. The electroactivity towards the methanol oxidation reaction (MOR) was evaluated in acid and alkaline electrolytes. The presence of nitrogen in the support favors a faster oxidation of methanol due to the enrichment of Pt at the near surface together with an increase of the intrinsic activity of PtRu nanoparticles., The work has received financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through projects ENE2014-52158-C2-1-R and 2-R (co-founded by FEDER) and from Aragon Government to the Fuel Conversion Group. M.J. Nieto-Monge has also received funding for her Ph.D. grant from MINECO. D. Sebastián acknowledges also MINECO for his Ramón y Cajal research contract (RYC-2016-20944).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-doped carbon xerogels as Pt support for the electro-reduction of oxygen

  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Gálvez Parruca, María Elena
  • Baquedano, Estela
  • Moliner Álvarez, Rafael
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Durability and limited catalytic activity are key impediments to the commercialization of polymer electrolyte fuel cells. Carbon materials employed as catalyst support can be doped with different heteroatoms, like nitrogen, to improve both catalytic activity and durability. Carbon xerogels are nanoporous carbons that can be easily synthesized in order to obtain N-doped materials. In the present work, we introduced melamine as a carbon xerogel precursor together with resorcinol for an effective in-situ N doping (3–4 wt % N). Pt nanoparticles were supported on nitrogen-doped carbon xerogels and their activity for the oxygen reduction reaction (ORR) was evaluated in acid media along with their stability. Results provide new evidences of the type of N groups aiding the activity of Pt for the ORR and of a remarkable stability for N-doped carbon-supported Pt catalysts, providing appropriate physico-chemical features., ICB-CSIC authors acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project ENE2014-52158-C2-1-R (co-founded by FEDER). CNR-ITAE authors acknowledge the financial support through the PRIN 2010-11 project “Advanced nanocomposite membranes and innovative electrocatalysts for durable polymer electrolyte membrane fuel cells (NAMED-PEM)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of molybdophosphoric acid in iron and cobalt graphene/chitosan composites for oxygen reduction reaction

  • Aghabarari, Behzad
  • Nezafati, N.
  • Roca-Ayats, M.
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
Iron and cobalt materials have attracted enormous interest as low-cost alternatives to noble-metal catalysts able to catalyse oxygen reduction reaction. Here, the effect of the heteropolyacid H3PMo12O40 (HPMo) into the structure of new composites formed by Fe, Co and reduced-graphene oxide/chitosan (rGOCS) has been investigated. Chitosan was used as a nitrogen precursor for nanocarbon, while reduced graphene oxide was introduced to tune the electrical conductivity. The physicochemical properties of electrocatalysts were performed by Raman, XRD, XPS and TEM. Activity toward ORR was carried out in a three-electrode electrochemical cell using a rotating disk electrode (RDE). The molybdophosphoric acid incorporation into the structure of Fe/rGOCS composites resulted in an increase of the activity of the oxygen reduction reaction in alkaline medium. Furthermore, the replacement of iron by cobalt yielded in a great improvement of the activity and stability, which may open new avenues for the design of nanomaterials utilizing HPMo/reduced-graphene oxide/chitosan composites., This work was supported by the Spanish Government under the MINECO projectENE2014-52158-C2-1R (co-funded by FEDER), Spanish National Research CouncilCOOPB20202 and MERC project721394002. M.R.A acknowledges the FPU-2012 program for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional N‐doped graphene Ti and Co nanocomposites for the oxygen reduction and evolution reactions

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lemes Pacheco, Giovanni
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
Developing efficient, durable, and low cost catalysts based on earth-abundant elements for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is essential for renewable energy conversion and energy storage devices. We report herein a simple one-pot procedure for the synthesis of non-precious metals N-doped graphene composites employing urea as nitrogen source, and their application as bifunctional catalysts for both the ORR and OER in alkaline environment. In this study, the effects of the addition of Ti and Co on the structure and performance of the N-doped graphene composites are investigated. The incorporation of Ti leads to a composite with both anatase and rutile TiO2 crystalline phases as well as Ti3+ species stabilized upon hybridization with N-doped reduced graphene oxide. The ORR onset potential for the Ti-based composite is 0.85 V (vs. RHE) and the number of electrons transferred is 3.5, showing superior stability than Pt/C after accelerated potential cycling in alkaline solution. However, this composite shows low activity and stability for the OER. On the other hand, the composite consisting of metallic Co and Co3O4 nanocrystals grown on N-doped reduced graphene oxide exhibits the best performance as bifunctional catalyst, with ORR and OER onset potentials of 0.95 V and 1.51 V (vs. RHE), respectively, and a number of electrons transferred of 3.6 (ORR). The results reveal the presence of important structural features such as metallic Co as the predominant crystalline component, amorphous Co3O4 phase and the coordination of Co-N-doped graphene. All of them seem to be fundamental for the high activity and stability towards ORR and OER., Authors acknowledge financial support given by Spanish Ministry of Economy and Competitiveness (MINECO) through projects ENE2014-52158-C2-1-R and 2-R (co-founded by FEDER). J. M. Luque and G. Lemes also thank MINECO and Aragon Government, respectively, for their Ph.D. grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocatalysts for low temperature fuel cells

  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Low temperature fuel cells technologies are currently shifting very fast from fundamental research to real growth. The development of electrocatalysts plays a vital role in the electrocatalytic reactions involved in these devices, because the catalyst determines the overall reaction efficiency, durability and cost. This article review progress in the research and development of electrocatalysts for low temperature fuel cells technologies, with especial attention in the contribution of our research teams over the last 15 years or so. The intensive research efforts in reducing or replacing Pt-based electrodes in fuel cells have been focus in the use of carbon nanomaterials as electrocatalytic supports, including carbon nanostructures tailored by surface modification or building in particular dopants/defects. Recent research effort has also led to the use of electronic conductivity noncarbon support materials. In addition, carbon-composite materials are proving to be a robust, inexpensive and active electrocatalysts, where the synergetic effect between the carbon nanomaterials and the ceramic or polymer nanostructures can lead to a superior electrocatalytic performance and durability for low temperature fuel cells. Perspectives on these catalysts and possible pathways to address current remaining challenges are also discussed., Authors thank the Ministry of Economy and Competitiveness (MINECO) and FEDER through the Project ENE2014-52158-C2-1-R for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DEMS strategy for the determination of the difference in surface acidity of carbon materials

  • Pérez Rodríguez, Sara
  • García, Gonzalo
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
2 Figuras. 1 Tabla., Differential electrochemical mass spectrometry (DEMS) was used to establish the difference in surface acidity in sulfuric acid solution between commercially available carbon black (Vulcan) and Vulcan which had been chemically modified with concentrated nitric acid (VulcanO). The mass signal for the m/z = 2 associated with H2 formation was observed to be influenced by functional groups at the carbon surfaces. Analysis of the mass spectra with the help of the Nernst equation allowed us to quantitatively find the difference in surface pH between the two carbon-based materials in acid media. The elevated concentration of functional groups at the VulcanO surface results in a decrease in the local acidity of the surface under these conditions (0.5 M H2SO4), and consequently the hydrogen evolution reaction (HER) is delayed., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-2-R and 1-R). GG acknowledges the Viera y Clavijo program (ACIISI & ULL) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical behavior of the carbon black Vulcan XC-72R: influence of the surface chemistry

  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
The effect of chemical surface oxidation of the carbon black Vulcan XC-72R on the capacitance, tolerance to corrosion and electrochemical activity toward the hydrogen evolution reaction (HER) has been studied in 0.1 M NaHCO3. Acid treatments with HNO3 or a HNO3H2SO4 mixture resulted in a progressive introduction of oxygen-containing groups which led to a strong increase of the capacitance and a higher tendency to carbon corrosion. In contrast, an inhibition of the hydrogen evolution current (at potentials more negative than −1.0 V) was observed for oxidized samples in comparison to the un-treated material. HER was also tested in the presence of dissolved CO2 to study the influence of the surface chemistry on the CO2 electroreduction. An inhibition of the H2 evolution current was evidenced in the CO2 saturated electrolyte due to the adsorption of species from CO2 reduction. A strong hydrogen current decrease (65–78%), and thus a higher tendency to adsorb (CO2)red species, was obtained on the original Vulcan and the HNO3-treated samples, in comparison to the carbon oxidized with HNO3H2SO4 (15%), which could be related to the highest content of basic groups of the last carbon., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R and 2-R). S. Pérez-Rodríguez thanks Gobierno de Aragón for the DGA grant. Furthermore, the authors wish to acknowledge Dra. Ana Beatriz García for the TPD measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of oxygen and structural properties on the electrical conductivity of powders of nanostructured carbon materials

  • Pérez Rodríguez, Sara
  • Torres Gamarra, Daniel
  • Lázaro Elorri, María Jesús
6 Figuras. 4 Tablas.-- Datos suplementarios sobre el artículo disponibles en la versión en línea del editor.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work reports a study of the electrical conductivity under compression of nanostructured carbon powders with different physicochemical properties (texture, chemical-surface and morphology): a commercial carbon black (Vulcan XC-72R) and synthesized ordered mesoporous carbon (OMC), carbon nanocoils (CNC) and carbon nanofibers (CNF). The electrical conductivity was determined from the sample resistance under compaction (from 0.5 to 140 MPa) using the four-probe technique. A comparison of intrinsic and grain electrical conductivities (calculated according to the percolation theory and the general effective media approximation) was performed. Additionally, samples were subjected to chemical oxidation or graphitization treatments to evaluate the effect of oxygen content and structural properties on the electrical conductivity. In spite of the physicochemical differences of carbon materials, an exponential decrease of the electrical conductivity with the oxygen amount was stated. Finally, thermal treatment of OMC at 1500 °C led to a surprising increase in its conductivity due to the graphitization of the amorphous carbon structure of the original material and the oxygen removal., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R). Furthermore, the authors wish to thank Dra. Ana Beatriz García (INCAR-CSIC) for the graphitization treatment of OMC and the TPD measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon supported PdM (M = Fe, Co) electrocatalysts for formic acid oxidation. Influence of the Fe and Co precursors

  • Juárez Marmolejo, Leticia
  • Pérez Rodríguez, Sara
  • Montes de Oca Yemha, María G.
  • Palomar Pardavé, Manuel
  • Romero Romo, Mario A.
  • Ezeta Mejía, Araceli
  • Morales Gil, Perla
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
8 Figuras.- 4 Tablas, Pd and PdM (M = Fe or Co) nanostructured electrocatalysts were synthesized by the impregnation method and supported on carbon black Vulcan XC-72R for the formic acid oxidation reaction, FAOR, in acid medium. Nitrates or chlorides were used as Fe and Co precursors to study the counter ion role on the physicochemical features and electrochemical performance of the electrocatalysts. TEM analysis showed that PdM was deposited on the carbon material with a particle size around 2–3 nm. From XRD, peaks associated with the fcc palladium planes were observed along with evidence of PdM alloy formation, particularly when the nitrate salts were used as metal precursors. Furthermore, XPS analyses indicated that nitrates promote the metal oxide formation to a greater extent than chlorides, mainly for Pd. PdCo electrocatalyst obtained from nitrates exhibited the highest performance for FAOR with a steady state current density of 451 and 313 μA cm−2 at 200 and 400 mV respectively, which is in both cases, 3 times larger than that developed for a commercial Pd/C catalyst., LJM is grateful to CONACYT for the grant awarded for this research, as well as to the UAM-A and the ICB for the support provided. MGMY, MRR, MPP and AEM thank the SNI for the distinction of their membership and the stipend provided. MGMY is indebted to L'oreál-UNESCO-CONACyT-AMC for the grant Women in Science 2016. MJL and SPR gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal growth, structural phase transitions, and optical gap evolution of CH3NH3Pb(Br1–xClx)3 perovskites

  • Álvarez Galván, María Consuelo
  • Alonso, J. A.
  • López, Carlos A.
  • López-Linares, E.
  • Contreras, Carlos
  • Lázaro Elorri, María Jesús
  • Fauth, François
  • Martínez Huerta, M. Victoria
11 Figuras.- 2 Tablas.- Material suplementario disponible en línea en la página web del editor.-- Título del postprint: Crystal growth, structural phase transitions and optical gap evolution of CH3NH3Pb(Br1-xClx)3 powders, Chemically tuned inorganic–organic hybrid halide perovskites based on bromide and chloride anions CH3NH3Pb(Br1–xClx)3 have been crystallized and investigated by synchrotron X-ray diffraction (SXRD), scanning electron microscopy, and UV–vis spectroscopy. CH3NH3PbBr3 and CH3NH3PbCl3 experience successive phase transitions upon cooling, which are suppressed for intermediate compositions probably due to compositional disorder. For CH3NH3PbCl3, a transient phase, formerly described as tetragonal, was identified at 167.5 K; the analysis of SXRD data demonstrated that it is indeed orthorhombic, with space group Pnma, and a ≈ √2ap; b ≈ 2ap; c ≈ √2ap (ap is the ideal cubic perovskite unit-cell parameter). The band gap engineering brought about by the chemical management of CH3NH3Pb(Br1–xClx)3 perovskites can be controllably tuned: the gap progressively increases with the concentration of Cl ions from 2.2 to 2.9 eV, and shows a concomitant variation with the unit-cell parameters of the cubic phases at 295 K. This study provides an improved understanding of the structural and optical properties of the mixed CH3NH3Pb(Br1–xClx)3 perovskites., Authors acknowledge financial support given by KIC RAW MATERIALS from European Union (OPTNEWOPT project) and the Spanish Ministry of Economy and Competitiveness (ENE2014-52158-C2-1-R project and MAT2017-84496-R) cofounded by FEDER. C.A.L. acknowledges ANPCyT and UNSL for financial support (Projects PICT2014-3576 and PROICO 2-2016), Argentine. C.A.L. is a member of CONICET., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-doped graphene catalysts with high nitrogen concentration for the oxygen reduction reaction

  • Lemes Pacheco, Giovanni
  • Sebastián del Río, David
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
9 Figures, 3 Tables.-- Informacion suplementaria disponible en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Nitrogen doped reduced graphene oxide (NrGO) catalysts and composites of these with carbon nitride (CN) with nitrogen content as high as 19.8 wt% and 35.8 wt%, respectively, have been synthesized by thermal annealing of multilayer graphene oxide and urea at different temperatures. Nitrogen has been effectively introduced as a mix of pyridinic, pyrrolic, pyridonic and quaternary bonding configurations into the carbon lattice of graphene upon removal of CN phase over 650 °C. The electrocatalytic activity towards oxygen reduction reaction (ORR) in 0.1 M NaOH has been investigated. NrGO catalysts with less nitrogen content show better performance than composites. NrGO produced at 800 °C presents the best activity with half-wave potential of 0.76 V vs. RHE and a mean number of electrons of 3.7, which are close to a commercial Pt/C catalyst. This study concludes that a high concentration of nitrogen atoms in multilayer reduced graphene oxide does not necessarily produce a highly active electrocatalyst, suggesting that carbon in the neighbourhood of nitrogen atoms are the active sites for ORR in alkaline medium., Authors acknowledge the financial support given by the Spanish Ministry of Science, Innovation and Universities (MICINN) through projects ENE2014-52158-C2-1-R and 2-R and ENE2017-83976-C2-1-R and 2-R (co-founded by FEDER) and Aragón Government to support “Grupo de Conversion de Combustibles” (T06_17R). G. Lemes and D. Sebastián thank the Aragón Government and MICINN for their Ph.D. grant and Ramón y Cajal research contract (RyC-2016-20944), respectively., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nitrogen doped ordered mesoporous carbon as support of ptru nanoparticles for methanol electro-oxidation

  • Sebastián, David
  • Nieto-Monge, María Jesús
  • Pérez-Rodríguez, Sara
  • Pastor, Elena
  • Lázaro, Mª Jesús
The low oxidation kinetics of alcohols and the need for expensive platinum group metals are still some of the main drawbacks for the commercialization of energy efficient direct alcohol fuel cells. In this work, we investigate the influence of nitrogen doping of ordered mesoporous carbon (CMK) as support on the electrochemical activity of PtRu nanoparticles. Nitrogen doping procedures involve the utilization of pyrrole as both nitrogen and carbon precursor by means of a templating method using mesoporous silica. This method allows obtaining carbon supports with up to 14 wt. % nitrogen, with an effective introduction of pyridinic, pyrrolic and quaternary nitrogen. PtRu nanoparticles were deposited by sodium formate reduction method. The presence of nitrogen mainly influences the Pt:Ru atomic ratio at the near surface, passing from 50:50 on the bare (un-doped) CMK to 70:30 for the N-doped CMK catalyst. The electroactivity towards the methanol oxidation reaction (MOR) was evaluated in acid and alkaline electrolytes. The presence of nitrogen in the support favors a faster oxidation of methanol due to the enrichment of Pt at the near surface together with an increase of the intrinsic activity of PtRu nanoparticles.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Enhanced stability in CH_3NH_3PbI_3 hybrid perovskite from mechano-chemical synthesis: structural, microstructural and optoelectronic characterization

  • López, Carlos A.
  • Abia, Carmen
  • Rodrigues, Joao E.
  • Serrano Sánchez, Federico
  • Nemes, Norbert Marcel
  • Martínez, José L.
  • Fernández Díaz, Maria T.
  • Biskup Zaja, Nevenko
  • Álvarez Galván, Consuelo
  • Carrascoso, Felix
  • Castellanos Gómez, Andres
  • Alonso, Jose A.
Among the hybrid organic-inorganic perovskites MAPbX(3) (MA: methyl-ammonium CH3-NH3+, X=halogen), the triiodide specimen (MAPbI(3)) is still the material of choice for solar energy applications. Although it is able to absorb light above its 1.6 eV bandgap, its poor stability in humid air atmosphere has been a major drawback for its use in solar cells. However, we discovered that this perovskite can be prepared by ball milling in a straightforward way, yielding specimens with a superior stability. This fact allowed us to take atomic-resolution STEM images for the first time, with sufficient quality to unveil microscopic aspects of this material. We demonstrated full Iodine content, which might be related to the enhanced stability, in a more compact PbI6 framework with reduced unit-cell volume. A structural investigation from neutron powder diffraction (NPD) data of an undeuterated specimen was essential to determine the configuration of the organic MA unit in the 100-298 K temperature range. A phase transition is identified, from the tetragonal structure observed at RT (space group I4/mcm) to an orthorhombic (space group Pnma) phase where the methyl-ammonium organic units are fully localized. Our NPD data reveal that the MA changes are gradual and start before reaching the phase transition. Optoelectronic measurements yield a photocurrent peak at an illumination wavelength of 820 nm, which is redshifted by 30 nm with respect to previously reported measurements on MAPbI(3) perovskites synthesized by crystallization from organic solvents.