Pasar al contenido principal

CELDAS ELECTROQUIMICAS CERAMICAS ESTABILIZADAS CON HALUROS PARA UNA CONVERSION Y PRODUCCION OPTIMIZADA DE HIDROGENO

ENE2015-66183-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structures, Phase Fields, and Mixed Protonic-Electronic Conductivity of Ba-Deficient, Pr-Substituted BaZr0.7Ce0.2Y0.1O3-δ

  • Heras-Juaristi, Gemma
  • Amador, Ulises
  • Romero De Paz, Julio
  • Fuentes, Rodolfo O.
  • Chinelatto, Adilson L.
  • Ritter, Clemens
  • Fagg, Duncan P.
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] The BaZrCeYO-BaPrO perovskite system, of interest for high-temperature electrochemical applications involving mixed protonic-electronic conductivity, forms a solid-solution with a wide interval of Ba substoichiometry in the range Ba(CeZr)PrYO, 0 ≤ x ≤ 1. Structural phase transitions mapped as a function of temperature and composition by high-resolution neutron powder diffraction and synchrotron X-ray diffraction reveal higher symmetry for lower Pr content and higher temperatures, with the largest stability field observed for rhombohedral symmetry (space group, R3c). Rietveld refinement, supported by magnetic-susceptibility measurements, indicates that partitioning of the B-site cations over the A and B perovskite sites compensates Ba substoichiometry in preference to A-site vacancy formation and that multiple cations are distributed over both sites. Electron-hole transport dominates electrical conductivity in both wet and dry oxidizing conditions, with total conductivity reaching a value of 0.5 S cm for the x = 1 end-member in dry air at 1173 K. Higher electrical conductivity and the displacement of oxygen loss to higher temperatures with increasing Pr content both reflect the role of Pr in promoting hole formation at the expense of oxygen vacancies. In more reducing conditions (N) and at low Pr contents, conductivity is higher in humidified atmospheres (0.023 atm pHO) indicating a protonic contribution to transport, whereas the greater electron-hole conductivity with increasing Pr content results in lower conductivity in humidified N due to the creation of protonic defects and the consumption of holes., We thank the MINECO, Spain (ENE2015-66183-R and MAT2016-78362-C4-1-R), CSIC, Spain (i-link0743), and CAPES, Brazil (PVE, Proceso 88881.03418/2013-1). Access to the neutron facilities at the Institut Laue Langevin (Grenoble, France) and the National Synchrotron Light Laboratory (LNLS, Campinas, Brazil) under grant 5-24-55(D2B) and research proposal D10B-XRD1-16166, respectively, is gratefully acknowledged. We also thank the FCT, PTDC/CTM-EME/6319/2014, QREN, FEDER, and COMPETE Portugal and the European Social Fund, European Union. U.A. acknowledges the Universidad San Pablo for financial support. We would also like to thank Steven Kermorvant and Alexandre Bosser of the IUT, University of Rennes (France), for assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature dependence of partial conductivities of the BaZr0.7Ce0.2Y0.1O3-δ proton conductor

  • Heras-Juaristi, Gemma
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] Partial conductivities are presented for BaZrCeYO, an important proton conductor for protonic-ceramic fuel cells and membrane reactors. Atmospheric dependencies of impedance performed in humidified and dry O, air, N and H(10%)/N(90%) in the temperature range 300–900 °C, supported by the modified emf method, confirm significant electron-hole and protonic contributions to transport. For very reducing and wet atmospheres, the conductivity is predominantly ionic, with a higher participation of protons with decreasing temperature and increasing water-vapour partial pressure (pHO). From moderately reducing conditions of wet N to wet O, however, the conductivity is considerably influenced by electron holes as revealed by a significant dependence of total conductivity on oxygen partial pressure (pO). With higher pHO, proton transport increases, with a concomitant decrease of holes and oxygen vacancies. However, the effect of pHO is also influenced by temperature, with a greater protonic contribution at both lower temperature and pO. Values of proton transport number t ≈ 0.63 and electronic transport number t ≈ 0.37 are obtained at 600 °C for pHO = 0.022 atm and pO = 0.2 atm, whereas t ≈ 0.95 and t ≈ 0.05 for pO = 10 atm. A hydration enthalpy of −109 kJ mol is obtained in the range 600–900 °C., We thank the “Ministerio de Economía, Industria y Competitividad” (MINECO) in Spain for financial assistance (ENE2015-66183-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical properties of proton-conducting BaCe0.8Y0.2O3-δ and the effects of bromine addition

  • Triviño Peláez, Ángel
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] A detailed analysis of the electrical properties of the proton-conducting BaCeYO phase (BCY20) and the effects of Br doping has been undertaken. Members of the system of nominal stoichiometry BaCeYOBr (x = 0, 0.05, 0.1 and 0.2) were synthesised by a citrate-nitrate process and high-temperature annealing up to 1500 °C. X-ray diffraction revealed the formation of single-phase material with a monoclinically distorted perovskite structure (space group I2/m) with greater distortion for Br-synthesised phase. Significant contrasts in electrical behaviour and stability between BCY20 and Br-synthesised series members were also found. However, chemical analysis by total X-ray fluorescence spectroscopy indicated that only trace amounts of Br remain after synthesis, indicating that Br addition influences stoichiometry but not directly the physicochemical properties. Higher conductivity is observed for the Br-synthesised compositions in wet and dry oxidising conditions in the temperature range 300–900 °C, reaching a value of 5.8 S m at 800 °C for the x = 0.2 member in wet O (pHO ∼ 0.022 atm). Determination of partial-conductivity components indicated that, in humid conditions and low temperature, the conductivity of 20% Br-synthesised material is principally protonic (t = 0.91 at 600 °C and pO = 0.2 atm) and superior to that of BCY20. Mixed oxide-ionic-electronic conductivity dominates at high pO (1 atm) and oxide-ionic conductivity at low pO (∼10 atm) in the temperature range 600–900 °C for both BCY and Br-doped samples. Stability was found to be poorer in CO for the Br-synthesised phases as determined by thermogravimetry and prolonged conductivity measurements., We thank MINECO in Spain forfinancial support (project ENE2015-66183-R and predoctoral grant BES-2016-077023). Wewould also like to thank Dr Ramón Fernández Ruiz of the Autonomous University of Madrid for useful discussions concerning TXRF measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SrZr0.9Y0.1O3−δ thin films by in-situ synthesis of triple alkoxide for protonic ceramic electrolyser membranes

  • Triviño Peláez, Ángel
  • Mather, Glenn C.
  • Pérez-Coll, Domingo
  • Aparicio, Mario
  • Mosa Ruiz, Jadra
[EN] Synthesis of the proton-conducting electrolyte SrZrYO(SZY) was undertaken by the sol–gel method employing an all-alkoxide route from reaction of strontium alkoxide produced in-situ and commercial zirconium and yttrium alkoxides. The solution was homogenized by a previous ligand exchange in 2-methoxyethanol to control the polycondensation rate and achieve SZY at the low final firing temperature of 700–800 °C. SZY thin films (~270 nm) were assisted by dip-coating on different substrates and characterized by scanning and transmission electron microscopy, grazing X-ray diffraction and confocal micro-Raman spectroscopy, revealing well-crystallized SZY phase with orthorhombic symmetry (space group, Pnma). Impedance spectroscopy of a thin film deposited on a quartz substrate revealed that protons contribute to transport in wet conditions as confirmed by a lower conductivity in DO-humidified air (1.02 eV) compared to HO-wetted air (0.99 eV), with the difference in activation energy consistent with a conductive isotope effect. [Figure not available: see fulltext.]., Ministerio de Ciencia, Innovación y Universidades of Spain for financial support (project ENE2015-66183-R, MAT2017-90695-3295-REDT, RTI2018-095088-B-I00 and student grant FPI BES-2016-077023). We also thank D. Ruiz and Dr. A. del Campo for their assistance with the experimental techniques., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Structures, phase fields, and mixed protonic−electronic conductivity of Ba-Deficient, Pr-Substituted BaZr0.7Ce0.2Y0.1O3−δ

  • Heras Juaristi, Gemma
  • Amador, Ulises
  • Romero de Paz, Julio
  • Fuentes, Rodolfo
  • Chinelatto, Adilson
  • Ritter, Clemens
  • Fagg, Duncan
  • Pérez Coll, Domingo
  • Mather, Glenn
The BaZr0.7Ce0.2Y0.1O3−δ−BaPrO3−δ perovskite system, of interest for high-temperature electrochemical applications involving mixed protonic−electronic conductivity, forms a solidsolution with a wide interval of Ba substoichiometry in the range Ba(Ce0.2Zr0.7)1−xPrxY0.1O3−δ, 0 ≤ x ≤ 1. Structural phase transitions mapped as a function of temperature and composition by highresolution neutron powder diffraction and synchrotron X-ray diffraction reveal higher symmetry for lower Pr content and higher temperatures, with the largest stability field observed for rhombohedral symmetry (space group, R3̅c). Rietveld refinement, supported by magnetic-susceptibility measurements, indicates that partitioning of the B-site cations over the A and B perovskite sites compensates Ba substoichiometry in preference to A-site vacancy formation and that multiple cations are distributed over both sites. Electron−hole transport dominates electrical conductivity in both wet and dry oxidizing conditions, with total conductivity reaching a value of ∼0.5 S cm−1 for the x = 1 end-member in dry air at 1173 K. Higher electrical conductivity and the displacement of oxygen loss to higher temperatures with increasing Pr content both reflect the role of Pr in promoting hole formation at the expense of oxygen vacancies. In more reducing conditions (N2) and at low Pr contents, conductivity is higher in humidified atmospheres (∼0.023 atm pH2O) indicating a protonic contribution to transport, whereas the greater electron−hole conductivity with increasing Pr content results in lower conductivity in humidified N2 due to the creation of protonic defects and the consumption of holes.