Pasar al contenido principal

MATERIALES PARA BATERIAS DE LITIO, POST LITIO Y PILAS DE COMBUSTIBLE: DEL LABORATORIO AL PROTOTIPO

MAT2016-78362-C4-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION UNIVERSITARIA SAN PABLO CEU

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect chemistry, electrical properties, and evaluation of new oxides Sr2CoNb1−xTixO6−δ (0≤x≤1) as cathode materials for solid oxide fuel cells

  • Azcondo, María Teresa
  • Yuste, Mercedes
  • Pérez-Flores, Juan Carlos
  • Muñoz-Gil, Daniel
  • García-Martín, Susana
  • Muñoz-Noval, Alvaro
  • Puente-Orench, Inés
  • García-Alvarado, Flaviano
  • Amador, Ulises
The perovskite series Sr2CoNb1−xTixO6−δ (0≤x≤1) was investigated in the full compositional range to assess its potential as cathode material for solid oxide fuel cell (SOFC). The variation of transport properties and thus, the area specific resistances (ASR) are explained by a detailed investigation of the defect chemistry. Increasing the titanium content from x=0–1 produces both oxidation of Co3+ to Co4+ (from 0 up to 40 %) and oxygen vacancies (from 6.0 to 5.7 oxygen atom/formula unit), although each charge compensation mechanism predominates in different compositional ranges. Neutron diffraction reveals that samples with high Ti‐contents lose a significant amount of oxygen upon heating above 600 K. Oxygen is partially recovered upon cooling as the oxygen release and uptake show noticeably different kinetics. The complex defect chemistry of these compounds, together with the compositional changes upon heating/cooling cycles and atmospheres, produce a complicated behavior of electrical conductivity. Cathodes containing Sr2CoTiO6−δ display low ASR values, 0,13 Ω cm2 at 973 K, comparable to those of the best compounds reported so far, being a very promising cathode material for SOFC., We thank Ministerio de Economía y Competitividad and Comunidad de Madrid for funding the projects MAT2013‐46452‐C4‐1‐R, MAT2013‐46452‐C4‐4‐R, and S2013/MIT‐2753, respectively. Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional are also acknowledged for financing the project MAT2016‐78362‐C4‐1‐R. We acknowledge CSIC, ILL and ESRF for financial support and facilitate the access to the BM25‐SpLine line at ESRF and D1B diffractometer at ILL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structures, Phase Fields, and Mixed Protonic-Electronic Conductivity of Ba-Deficient, Pr-Substituted BaZr0.7Ce0.2Y0.1O3-δ

  • Heras-Juaristi, Gemma
  • Amador, Ulises
  • Romero De Paz, Julio
  • Fuentes, Rodolfo O.
  • Chinelatto, Adilson L.
  • Ritter, Clemens
  • Fagg, Duncan P.
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
[EN] The BaZrCeYO-BaPrO perovskite system, of interest for high-temperature electrochemical applications involving mixed protonic-electronic conductivity, forms a solid-solution with a wide interval of Ba substoichiometry in the range Ba(CeZr)PrYO, 0 ≤ x ≤ 1. Structural phase transitions mapped as a function of temperature and composition by high-resolution neutron powder diffraction and synchrotron X-ray diffraction reveal higher symmetry for lower Pr content and higher temperatures, with the largest stability field observed for rhombohedral symmetry (space group, R3c). Rietveld refinement, supported by magnetic-susceptibility measurements, indicates that partitioning of the B-site cations over the A and B perovskite sites compensates Ba substoichiometry in preference to A-site vacancy formation and that multiple cations are distributed over both sites. Electron-hole transport dominates electrical conductivity in both wet and dry oxidizing conditions, with total conductivity reaching a value of 0.5 S cm for the x = 1 end-member in dry air at 1173 K. Higher electrical conductivity and the displacement of oxygen loss to higher temperatures with increasing Pr content both reflect the role of Pr in promoting hole formation at the expense of oxygen vacancies. In more reducing conditions (N) and at low Pr contents, conductivity is higher in humidified atmospheres (0.023 atm pHO) indicating a protonic contribution to transport, whereas the greater electron-hole conductivity with increasing Pr content results in lower conductivity in humidified N due to the creation of protonic defects and the consumption of holes., We thank the MINECO, Spain (ENE2015-66183-R and MAT2016-78362-C4-1-R), CSIC, Spain (i-link0743), and CAPES, Brazil (PVE, Proceso 88881.03418/2013-1). Access to the neutron facilities at the Institut Laue Langevin (Grenoble, France) and the National Synchrotron Light Laboratory (LNLS, Campinas, Brazil) under grant 5-24-55(D2B) and research proposal D10B-XRD1-16166, respectively, is gratefully acknowledged. We also thank the FCT, PTDC/CTM-EME/6319/2014, QREN, FEDER, and COMPETE Portugal and the European Social Fund, European Union. U.A. acknowledges the Universidad San Pablo for financial support. We would also like to thank Steven Kermorvant and Alexandre Bosser of the IUT, University of Rennes (France), for assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effects of Sr content on the performance of Nd1- xSrxCoO3-δair-electrode materials for intermediate temperature solid oxide fuel cells under operational conditions

  • Muñoz-Gil, Daniel
  • Azcondo, María Teresa
  • Ritter, Clemens
  • Fabelo, Oscar
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
  • Amador, Ulises
  • Boulahya, Khalid
The potential of the perovskite system Nd1-xSrxCoO3-δ (x = 1/3 and 2/3) as cathode material for solid oxide fuel cells (SOFCs) has been investigated via detailed structural, electrical, and electrochemical characterization. The average structure of x = 1/3 is orthorhombic with a complex microstructure consisting of intergrown, adjacent, perpendicularly oriented domains. This orthorhombic symmetry remains throughout the temperature range 373-1073 K, as observed by neutron powder diffraction. A higher Sr content of x = 2/3 leads to stabilization of the cubic perovskite with a homogeneous microstructure and with a higher oxygen vacancy content and cobalt oxidation state than the orthorhombic phase at SOFC operation temperature. Both materials are p-type electronic conductors with high total conductivities of 690 and 1675 S·cm-1 at 473 K in air for x = 1/3 and 2/3, respectively. Under working conditions, both compounds exhibit similar electronic conductivities, since x = 2/3 loses more oxygen on heating than x = 1/3, associated with a greater loss of p-type charger carriers. However, composite cathodes prepared with Nd1/3Sr2/3CoO3-δ and Ce0.8Gd0.2O2-δ present lower ASR values (0.10 ω·cm2 at 973 K in air) than composites prepared with Nd2/3Sr1/3CoO3-δ and Ce0.8Gd0.2O2-δ (0.34 ω·cm2). The high activity for the oxygen electrochemical reaction at intermediate temperatures is likely attributable to a large disordered oxygen-vacancy concentration, resulting in a very promising SOFC cathode for real devices. © 2020 Elsevier B.V., All rights reserved., We thank MICINN for funding the projects MAT2016-78362- C4-1-R, MAT2016-78362-C4-4-R, and RTI2018-095088-BI00 and ILL for allocation of beam time (experiment codes 5- 24-583 and CRG-D1B-19-379; DOI: 10.5291/ILL-DATA. CRG-2713). The authors also thank the “Comunidad de Madrid” and European Structural Funds for their financial support of the MATERYENER3-CM (S2013/MIT-2753) project. We are also grateful to the “Red de Excelencia” (MINECO, MAT 2017-090695-REDT) for facilitating collaboration between the Spanish groups. U.A. and M.T.A. also thank USP-CEU for financial support., The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.inorgchem.0c01049. (Figure S1) PXRD patterns Nd2/3Sr1/3CoO3−δ and Nd1/3Sr2/3CoO3−δ; (Figure S2) thermal evolution of the unit cell volume of Nd2/3Sr1/3CoO3−δ and (b) Nd1/3Sr2/3CoO3−δ in air; (Figure S3) NPD for Nd1/3Sr2/3CoO3−δ at 1073 K in air (Figure S4); mass loss and oxygen loss a function of temperature for Nd2/3Sr1/3CoO3−δ and Nd1/3Sr2/3CoO3−δ; (Table S1) nominal and experimental (determined by EDS) compositions for the Nd2/3Sr1/3CoO3−δ sample used for NPD and electrical characterization; (Table S2) nominal and experimental (determined by EDS) compositions for the Nd1/3Sr2/3CoO3−δ sample used for NPD and electrical characterization; (Table S3) structural parameters for Nd1−xSrxCoO3−δ obtained from joint fitting of NPD and PXRD data; (Table S4) selected structural information for Nd1−xSrxCoO3−δ (x = 1/3, 2/3) obtained from NPD data, Peer reviewed