Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Intermediate-Temperature Electrochemical Performance of Air Electrodes for Solid Oxide Cells with Spray-Pyrolyzed Active Layers

  • Zapata-Ramírez, Víctor
  • Dos Santos-Gómez, Lucía
  • Mather, Glenn C.
  • Marrero-López, David
  • Pérez-Coll, Domingo
The potential of interactive layers of mixed-conducting oxides for improving the performance of air electrodes of solid oxide cells in the intermediate-temperature range is demonstrated. Active layers of CeGdO (CGO), CePrO (CPO), and SrFeMoO (SFM) with thickness in the range 200-400 nm are deposited on CGO-based electrolyte by spray pyrolysis, followed by deposition of a SFM/CGO composite air electrode by painting. The morphologies and phase composition of the active layers are examined by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy microanalysis. The electrochemical performance of the electrolyte-electrode assemblies is determined by impedance spectroscopy in the range 600-800 °C. Significant improvements in the performance of the electrode process and the geometrically normalized ohmic conductance are observed for the assembly with a CPO active layer with mixed-oxide-ionic-electronic conductivity, especially in the low-temperature range, attributable to extension of the surface path of the electrochemical reactions. The CGO intermediate layer also improves performance but to a lesser degree, most likely due to better ionic-current collection in comparison to the assemblies with either SFM as the active layer or no active layer., We acknowledge the “Fundacioń Domingo Martínez” (Ayuda a la Investigación 2017. Área de Materiales: celdas decombustible) and “Ministerio de Ciencia, Innovación y Universidades” (RTI2018-095088-B-I00 and RTI2018-093735-B-I00) for financial support. Collaboration between the research groups was facilitated by the “Red de Excelencia”program (MINECO, MAT2017-090695-REDT).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effects of Sr content on the performance of Nd1- xSrxCoO3-δair-electrode materials for intermediate temperature solid oxide fuel cells under operational conditions

  • Muñoz-Gil, Daniel
  • Azcondo, María Teresa
  • Ritter, Clemens
  • Fabelo, Oscar
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
  • Amador, Ulises
  • Boulahya, Khalid
The potential of the perovskite system Nd1-xSrxCoO3-δ (x = 1/3 and 2/3) as cathode material for solid oxide fuel cells (SOFCs) has been investigated via detailed structural, electrical, and electrochemical characterization. The average structure of x = 1/3 is orthorhombic with a complex microstructure consisting of intergrown, adjacent, perpendicularly oriented domains. This orthorhombic symmetry remains throughout the temperature range 373-1073 K, as observed by neutron powder diffraction. A higher Sr content of x = 2/3 leads to stabilization of the cubic perovskite with a homogeneous microstructure and with a higher oxygen vacancy content and cobalt oxidation state than the orthorhombic phase at SOFC operation temperature. Both materials are p-type electronic conductors with high total conductivities of 690 and 1675 S·cm-1 at 473 K in air for x = 1/3 and 2/3, respectively. Under working conditions, both compounds exhibit similar electronic conductivities, since x = 2/3 loses more oxygen on heating than x = 1/3, associated with a greater loss of p-type charger carriers. However, composite cathodes prepared with Nd1/3Sr2/3CoO3-δ and Ce0.8Gd0.2O2-δ present lower ASR values (0.10 ω·cm2 at 973 K in air) than composites prepared with Nd2/3Sr1/3CoO3-δ and Ce0.8Gd0.2O2-δ (0.34 ω·cm2). The high activity for the oxygen electrochemical reaction at intermediate temperatures is likely attributable to a large disordered oxygen-vacancy concentration, resulting in a very promising SOFC cathode for real devices. © 2020 Elsevier B.V., All rights reserved., We thank MICINN for funding the projects MAT2016-78362- C4-1-R, MAT2016-78362-C4-4-R, and RTI2018-095088-BI00 and ILL for allocation of beam time (experiment codes 5- 24-583 and CRG-D1B-19-379; DOI: 10.5291/ILL-DATA. CRG-2713). The authors also thank the “Comunidad de Madrid” and European Structural Funds for their financial support of the MATERYENER3-CM (S2013/MIT-2753) project. We are also grateful to the “Red de Excelencia” (MINECO, MAT 2017-090695-REDT) for facilitating collaboration between the Spanish groups. U.A. and M.T.A. also thank USP-CEU for financial support., The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.inorgchem.0c01049. (Figure S1) PXRD patterns Nd2/3Sr1/3CoO3−δ and Nd1/3Sr2/3CoO3−δ; (Figure S2) thermal evolution of the unit cell volume of Nd2/3Sr1/3CoO3−δ and (b) Nd1/3Sr2/3CoO3−δ in air; (Figure S3) NPD for Nd1/3Sr2/3CoO3−δ at 1073 K in air (Figure S4); mass loss and oxygen loss a function of temperature for Nd2/3Sr1/3CoO3−δ and Nd1/3Sr2/3CoO3−δ; (Table S1) nominal and experimental (determined by EDS) compositions for the Nd2/3Sr1/3CoO3−δ sample used for NPD and electrical characterization; (Table S2) nominal and experimental (determined by EDS) compositions for the Nd1/3Sr2/3CoO3−δ sample used for NPD and electrical characterization; (Table S3) structural parameters for Nd1−xSrxCoO3−δ obtained from joint fitting of NPD and PXRD data; (Table S4) selected structural information for Nd1−xSrxCoO3−δ (x = 1/3, 2/3) obtained from NPD data, Peer reviewed