Pasar al contenido principal

APROVECHAMIENTO DE BIOMASA Y PRODUCCION SOSTENIBLE DE ENERGIA MEDIANTE (FOTO)CATALIZADORES Y REACTORES ESTRUCTURADOS BASADOS EN MATERIALES CARBONOSOS

ENE2017-82451-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrodeoxygenation of vanillin over noble metal catalyst supported on biochars: Part II: Catalytic behaviour

  • Santos Muñoz, José Luis
  • Mäki-Arvela, Päivi
  • Wärnå, Johan
  • Monzón, Antonio
  • Centeno, Miguel Ángel
  • Murzin, Dmtry Yu.
Vanillin hydrodeoxygenation was investigated using noble metal (Pd, Au, Ru) supported on active carbon prepared from waste derived biochars, which were produced via pyrolysis in CO2 atmosphere. Chemical activation with ZnCl2 and HNO3 was also used in the preparation of active carbon to enhance the specific surface area and demineralize material, respectively. Both fresh and spent catalysts were characterized with X-ray diffraction, DRIFTS, zeta potential measurement and HR-TEM. The highest selectivity to p-creosol, 92 % selectivity at complete vanillin conversion after 3 h was obtained in vanillin hydrodeoxygenation at 100 °C under 30 bar in hydrogen in water with Pd/C catalyst prepared via pyrolysis under CO2 from wine waste and using ZnCl2 as a chemical activation agent. Hydrodeoxygenation activity increased with increasing metal dispersion. A kinetic model including adsorption of vanillin described well the experimental data., Financial support for this work has been obtained from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grants ENE2013-47880-C3-2-R, ENE2017-82451-C3-3-R and ENE2017-82451-C3-1-R) co-financed by FEDER funds from the European Union. J.L. Santos also acknowledges the MINECO for his pre-doctoral fellowship (BES-2014-068244) and the mobility fellowship (EEBB-I-17-11979)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal catalysts supported on biochars: Part I synthesis and characterization

  • Santos, José Luis
  • Mäki-Arvela, Päivi
  • Monzón, Antonio
  • Murzin, Dmtry Yu.
  • Centeno, Miguel Ángel
In the current study, synthesis and detailed characterization of cellulose biochars as a waste biomass model component and vine shoot biochars as a real waste biomass catalyst was performed. Although initially biochars exhibit poor textural properties, a simple activation process can make them much more suitable as a catalyst supports. A combination of physical (CO2) and chemical activation (ZnCl2) was evaluated. The characterization results indicated that the surface area and pore volume of the biochars have increased significantly by chemical activation treatment with ZnCl2. A series of metal catalysts (Pd, Au and Ru) supported on biochars was prepared and characterized. The prepared materials represent a set of noble metal catalysts supported on biochars with different textural and surface properties, which can be used to evaluate the catalytic role of the active phase and carbon support nature in catalytic reactions of interest, such as hydrodeoxygenation, described in the part II., Financial support for this work has been obtained from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grants ENE2013-47880-C3-2-R, ENE2017-82451-C3-3-R and ENE2017-82451-C3-1-R) co-financed by FEDER funds from the European Union. J.L. Santos also acknowledges the MINECO for his predoctoral fellowship (BES-2014-068244) and the mobility fellowship (EEBB-I-17-11979)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fructose dehydration reaction over functionalized nanographitic catalysts in MIBK/H2O biphasic system

  • Delgado-Martín, Gabriel
  • Bounoukta, Charf Eddine
  • Ammari, Fatima
  • Domínguez, M. I.
  • Monzón, Antonio
  • Ivanova, Svetlana
  • Centeno, Miguel Ángel
A series of functionalized nanographitic carbons is prepared, characterized and tested in fructose dehydration reaction to 5-hydroxymethylfurfural. The functionalization treatment was selected to introduce various Brönsted acid sites and to modify the textural and catalytic properties of the initial carbon material. Within the series, the sulfonated carbons present the most interesting catalytic behavior resulting in important selectivity to the desired product once the reaction variables were properly adjusted., Financial support for this work has been obtained from the Spanish Ministerio de Economía y Competitividad (MINECO) (Projects ENE2017-82451-C3-1-R and ENE2017-82451-C3-3-R) co-financed by FEDER funds from the European Union.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active Ce- and Mg-promoted Ni catalysts supported on cellulose-derived carbon for low-temperature CO2 methanation

  • Tarifa, Pilar
  • Megías-Sayago, Cristina
  • Cazaña, Fernando
  • González-Martín, Miguel
  • Latorre, Nieves
  • Romeo, Eva
  • Delgado, Juan José
  • Monzón, Antonio
The CO2 methanation performance of Mg- and/or Ce-promoted Ni catalysts supported on cellulose-derived carbon (CDC) was investigated. The samples, prepared by biomorphic mineralization techniques, exhibit pore distributions correlated to the particle sizes, revealing a direct effect of the metal content in the textural properties of the samples. The catalytic performance, evaluated as CO2 conversion and CH4 selectivity, reveals that Ce is a better promoter than Mg, reaching higher conversion values in all of the studied temperature range (150–500 °C). In the interval of 350–400 °C, Ni–Mg–Ce/CDC attains the maximum yield to methane, 80%, reaching near 100% CH4 selectivity. Ce-promoted catalysts were highly active at low temperatures (175 °C), achieving 54% CO2 conversion with near 100% CH4 selectivity. Furthermore, the large potential stability of the Ni–Mg–Ce/CDC catalyst during consecutive cycles of reaction opens a promising route for the optimization of the Sabatier process using this type of catalyst., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MICINN, Madrid, Spain, Grant ENE2013-44350R) and MICINN–FEDER (Project ENE2017-82451-C3). Pilar Tarifa acknowledges financial support from the MICINN (Contract BES-2014-069010). Cristina Megías-Sayago acknowledges financial support from the MICINN “Juan de la Cierva Formación” Fellowship (FJC2018-037162-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective synthesis of carbon nanotubes by catalytic decomposition of methane using Co-Cu/cellulose derived carbon catalysts: A comprehensive kinetic study

  • Henao, Wilson
  • Cazaña, Fernando
  • Tarifa, Pilar
  • Romeo, Eva
  • Latorre, Nieves
  • Sebastián, Víctor
  • Delgado, Juan José
  • Monzón, Antonio
Determination of the optimal operating conditions for large-scale production of carbonaceous nanomaterials (CNTs), mainly carbon nanotubes (CNTs) but also graphene-related materials (GRMs), remains as a major industrial and scientific challenge. For this purpose, our group is conducting an extensive study to evaluate the effect of the reaction conditions and catalyst compositions on the productivity and selectivity to different carbonaceous nanomaterials. In the case of Co-based catalysts, we have found that the promotion with Cu or Mn has a dramatic effect on the type of carbon nanomaterials synthesized. Thus, the presence of Cu promotes the growth of CNTs, while Mn favors the formation of two-dimensional GRMs. In this context, we present here a comprehensive study of the CNTs growth via catalytic decomposition of methane using a Co-Cu/cellulose derived carbon catalyst. The influence of the reaction temperature (650–950 °C) and feed composition (7.1%–42.9% of CH4 and H2) on the yield and CNTs quality was evaluated. A transition in the characteristics of the carbonaceous nanomaterial growth was observed at about 800 °C. Below this temperature, the reaction was selective towards the formation of CNTs, while above 800 °C, the obtained nanomaterial exhibited a graphite-like morphology. In addition, the catalyst deactivation was quite low in the CNTs growth regime, attaining high productivity under 11 h of operation. The model used to study the kinetics of carbon formation allowed understanding the most influential variables in the growth process, revealing the existence of a transition temperature at which there is a change in the preferential path for the formation of CNTs or GRMs. After exploring a large set of reaction conditions, the best operating parameters for growing CNTs with high productivity (0.29 gC/gcat∙h) and quality (ID/IG = 1.10, I2D/IG = 0.13) were found at 750 °C under 28.6% CH4:14.3% H2:57.1% N2., The authors acknowledge financial support from the Ministry of Science and Innovation (Madrid, Spain), Projects ENE2017-82451-C3-1-R and ENE2017-82451-C3-2-R. W. Henao acknowledges the financial support from Fundación Carolina (Madrid, Spain) and the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance of AISI 316L-stainless steel foams towards the formation of graphene related nanomaterials by catalytic decomposition of methane at high temperature

  • Cazaña, Fernando
  • Latorre, Nieves
  • Tarifa, Pilar
  • Royo, Carlos J.
  • Sebastián, Víctor
  • Romeo, Eva
  • Centeno, Miguel Ángel
  • Monzón, Antonio
This work explores the preparation of graphene-related materials (GRMs) grown on stainless steel foams via catalytic decomposition of methane (CDM). The main active phases for the reaction are the Fe nanoparticles segregated from the stainless-steel after the activation stage of the foam. The effect of the feed composition and reaction temperature has been studied in order to maximize the productivity, stability and selectivity to GRMs. The maximum productivity attained was 0.116 gC/gfoam h operating at 950 °C with a feed ratio of CH4/H2 = 3 (42.9 %CH4:14.3 %H2). The carbonaceous nanomaterials (CNMs) obtained were characterized by X-Ray diffraction, Raman spectroscopy and by transmission and scanning electron microscopy. The parameters of the kinetic model developed are directly related to the relevant stages of the process, including carburization, diffusion-precipitation and deactivation-regeneration. The balance among these sequential stages determines the overall performance of the activated foam. In conditions of rapid carburization of the Fe NPs (pCH4 > 14 %), the productivity to CNMs is favoured, avoiding an initial deactivation of the active sites by fouling with amorphous carbon. After a rapid carburization, the selectivity to the different CNMs is governed by the ratio CH4/H2, and mainly by the temperature. Thus, the formation of GRMs, mainly Few Layer Graphene (FLG) and even graphene, is favoured at temperatures above 900 °C. At lower temperatures, carbon nanotubes are formed., The authors acknowledge financial support from MICINN (Madrid, Spain) FEDER, Project ENE2017-82451-C3. P. Tarifa acknowledges the grant of MICINN (Ref.: BES-2014-069010)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Selective synthesis of carbon nanotubes by catalytic decomposition of methane using Co-Cu/cellulose derived carbon catalysts: A comprehensive kinetic study

  • Henao, W.
  • Cazaña, F.
  • Tarifa, P.
  • Romeo, E.
  • Latorre, N.
  • Sebastian, V.
  • Delgado, J.J.
  • Monzón, A.
Determination of the optimal operating conditions for large-scale production of carbonaceous nanomaterials (CNTs), mainly carbon nanotubes (CNTs) but also graphene-related materials (GRMs), remains as a major industrial and scientific challenge. For this purpose, our group is conducting an extensive study to evaluate the effect of the reaction conditions and catalyst compositions on the productivity and selectivity to different carbonaceous nanomaterials. In the case of Co-based catalysts, we have found that the promotion with Cu or Mn has a dramatic effect on the type of carbon nanomaterials synthesized. Thus, the presence of Cu promotes the growth of CNTs, while Mn favors the formation of two-dimensional GRMs. In this context, we present here a comprehensive study of the CNTs growth via catalytic decomposition of methane using a Co-Cu/cellulose derived carbon catalyst. The influence of the reaction temperature (650–950 °C) and feed composition (7.1%–42.9% of CH4 and H2) on the yield and CNTs quality was evaluated. A transition in the characteristics of the carbonaceous nanomaterial growth was observed at about 800 °C. Below this temperature, the reaction was selective towards the formation of CNTs, while above 800 °C, the obtained nanomaterial exhibited a graphite-like morphology. In addition, the catalyst deactivation was quite low in the CNTs growth regime, attaining high productivity under 11 h of operation. The model used to study the kinetics of carbon formation allowed understanding the most influential variables in the growth process, revealing the existence of a transition temperature at which there is a change in the preferential path for the formation of CNTs or GRMs. After exploring a large set of reaction conditions, the best operating parameters for growing CNTs with high productivity (0.29 gC/gcat·h) and quality (ID/IG = 1.10, I2D/IG = 0.13) were found at 750 °C under 28.6% CH4:14.3% H2:57.1% N2.