Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of different Mo/Au TES designs for radiation detectors

  • Pobes, Carlos
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Štrichovanec, Pavel
  • Moral-Vico, Javier
  • Casañ Pastor, Nieves
  • Jáudenes, Rosa M.
  • Sesé Monclús, Javier
Work financed by the Spanish Ministerio de Economía y Competitividad (MINECO, projects ESP2014-59306-JIN, ESP2014-53672-C3-2-P, ESP2016-76683-C3-2-R), the European Space Agency (ESA, CTP Contract “Optimization of a European TES array”) and the European Commission (H2020 project AHEAD: Integrated Activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-04969). RMJ wishes to thank MINECO for her FPI contract. We also thank PTB for providing the SQUIDs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large current-induced broadening of the superconducting transition in Mo/Au transition edge sensors

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Štrichovanec, Pavel
  • González-Arrabal, Raquel
The R(T, I) shape of the superconducting transition in transition edge sensors (TESs) is of crucial importance to determine their ultimate performance. This paper reports a study of the temperature and current dependences of the transition of Mo/Au TESs, focused on the low resistance region, where these devices preferentially operate. A large broadening of the transition is observed when increasing the applied current. An empirical analytic expression for R(T, I) is found, which describes the transition of devices with different critical temperatures, from R = 0 up to at least 30% Rn (in some cases nearly 80% Rn). Several mechanisms for this behaviour are considered; results show that a current assisted vortex pair unbinding mechanism (Berezinskii–Kosterlitz– Thouless transition) could be the possible origin for this behaviour. Finally, the consequences of the current-induced transition broadening for TES properties and operation are outlined., Work funded by the Spanish Ministerio de Economía y Competitividad (MINECO, project ESP2016-76683-C3-2-R) and the European Commission (H2020 project AHEAD: Integrated Activities for the high energy astrophysics domain’). Personnel from ICMAB acknowledge financial support from MINECO, through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-04969). We kindly thank Professor R Navarro for a critical reading of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure and electrical transport in electrodeposited Bi films

  • Moral-Vico, Javier
  • Casañ Pastor, Nieves
  • Camón, Agustín
  • Pobes, Carlos
  • Jáudenes, Rosa M.
  • Štrichovanec, Pavel
  • Fàbrega, Lourdes
The semimetal character of bismuth and its large photon absorbing power make of this element the most suitable absorber material for X-ray low temperature detectors. This application requires coatings of Bi with thicknesses and properties that only electrodeposition methods may achieve. Although there are studies on electrodeposition of bismuth for these detectors and other devices, the process is not straightforward and has not been sufficiently studied in terms of the desired final properties, neither the effect of different parameters is well known or easily reproduced. This work reports the influence of two different electrolytes, of the deposition method, and of heating and stirring on the structure, microstructure and transport properties of bismuth films. Typically, rhombohedral Bi is obtained upon electrodeposition with very good crystallinity, and some crystal preferential orientation, while significant empirical correlations are found among electrochemical parameters, microstructure, and resistivity. Such correlation allows the identification of the deposition parameters for coatings that yield the optimal functional properties., Work financed by the Spanish Ministerio de Economía y Competitividad-MINECO (projects ESP2014-53672-C3-2-P, ESP2016-76683-C3-2-R and ESP2014-59309-JIN), the European Space Agency-ESA (CTP Contract “Optimization of a European TES array”) and the European Commission (H2020 project AHEAD: “Integrated activities for the high energy astrophysics domain”). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). RMJ wishes to thank MINECO for her FPI contract. We acknowledge also the help of Guillermo Antorrena (INA) on XPS data., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the proximity effect in Mo/Au bilayers

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Štrichovanec, Pavel
  • Pobes, Carlos
We report on the sensitivity of superconducting transition temperature (Tc) to the individual layers' thickness in Mo/Au proximity bilayers to be used in transition-edge sensors (TESs). The achieved good reproducibility and quality of the bilayers allow a clear determination of the superconducting critical temperature Tc as a function of the Mo and Au thicknesses. One objective of this work is to analyse the quality of the Mo/Au interface and to assess the possible effects of the double Au layer we use to fabricate these bilayers and TESs based on them. Experimental data are analysed on the basis of Usadel equations using the model developed by Martinis and co-workers, in which the proximity effect in the bilayer is mainly governed by the interface transparency between the superconductor and the normal metal. We find that this model describes quite well the behavior of Tc, even for quite thick Au layers, and that the double Au layer does not play any relevant role on the proximity effect., Work financed by the Spanish MINECO (projects ESP2014-59306- JIN and ESP2016-76683- C3-2-R) and the European Commission (H2020 project AHEAD). ICMAB acknowledges financial support from MINECO, through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015- 04969). Authors thank the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AC/DC characterization of a Ti/Au TES with Au/Bi absorber for x-ray detection

  • Taralli, Emanuele
  • Pobes, Carlos
  • Khosropanah, Pourya
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Gottardi, Luciano
  • Nagayoshi, Kenichiro
  • Ridder, M.
  • Bruijn, Marcel
  • Gao, J. R.
Transition-edge sensors (TESs) are used as very sensitive thermometers in microcalorimeters aimed at detection of different wavelengths. In particular, for soft X-ray astrophysics, science goals require very high-resolution microcalorimeters which can be achieved with TESs coupled to suitable absorbers. For many applications, there is also need for a high number of pixels which typically requires multiplexing in the readout stage. Frequency-domain multiplexing (FDM) is a common scheme and is the baseline proposed for the ATHENA mission. FDM requires biasing the TES in AC at MHz frequencies. Recently, there has been reported degradation in performances under AC with respect to DC bias. In order to assess the performances of TESs to be used with FDM, it is thus of great interest to compare the performances of the same device both under AC bias and DC bias. This requires two different measurement set-ups with different processes for making the characterization. We report in this work the preliminary results of a single-pixel characterization performed on a TiAu TES under AC and afterwards under DC bias in different facilities. Extraction of dynamical parameters and noise performances are compared in both cases as a first stage for further AC/DC comparison of these devices., This work is partly funded by European Space Agency (ESA) and coordinated with other European efforts under ESA CTP contract ITT AO/1-7947/14/NL/BW. It has also received funding from the European Union’s Horizon 2020 Programme under the AHEAD (Activities for the High-Energy Astrophysics Domain) project with grant agreement number 654215. CSIC work is financed by the Spanish Ministerio de Ciencia, Innovación y Universidades-MICINN (projects ESP2016-76683-C3-2-R and RTI2018-096686-B-C22). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Large current-induced broadening of the superconducting transition in Mo/Au transition edge sensors

  • Fabrega, L.
  • Camon, A.
  • Pobes, C.
  • Strichovanec, P.
  • Gonzalez-Arrabal, R.
The R(T, I) shape of the superconducting transition in transition edge sensors (TESs) is of crucial importance to determine their ultimate performance. This paper reports a study of the temperature and current dependences of the transition of Mo/Au TESs, focused on the low resistance region, where these devices preferentially operate. A large broadening of the transition is observed when increasing the applied current. An empirical analytic expression for R(T, I) is found, which describes the transition of devices with different critical temperatures, from R = 0 up to at least 30% R-n (in some cases nearly 80% R-n). Several mechanisms for this behaviour are considered; results show that a current assisted vortex pair unbinding mechanism (Berezinskii-Kosterlitz-Thouless transition) could be the possible origin for this behaviour. Finally, the consequences of the current-induced transition broadening for TES properties and operation are outlined.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring the Proximity Effect in Mo/Au Bilayers

  • Fabrega, L.
  • Camon, A.
  • Strichovanec, P.
  • Pobes, C.
We report on the sensitivity of superconducting transition temperature (T c ) to the individual layers' thickness in Mo/Au proximity bilayers to be used in transition-edge sensors (TESs). The achieved good reproducibility and quality of the bilayers allow a clear determination of the superconducting critical temperature T c as a function of the Mo and Au thicknesses. One objective of this work is to analyse the quality of the Mo/Au interface and to assess the possible effects of the double Au layer we use to fabricate these bilayers and TESs based on them. Experimental data are analysed on the basis of Usadel equations using the model developed by Martinis and co-workers, in which the proximity effect in the bilayer is mainly governed by the interface transparency between the superconductor and the normal metal. We find that this model describes quite well the behavior of T c , even for quite thick Au layers, and that the double Au layer does not play any relevant role on the proximity effect.