Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integral Fractionation of Rice Husks into Bioactive Arabinoxylans, Cellulose Nanocrystals, and Silica Particles

  • Requena-Peris, Raquel
  • Jiménez Quero, A.
  • Moriana Torró, Rosana
  • Vilaplana Domingo, Francisco Javier
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Rice husk is an important agricultural byproduct that has not been exploited yet to full capacity for advanced applications. The feasibility of obtaining high-value products such as bioactive hemicelluloses and cellulose nanocrystals (CNCs) from rice husk is here demonstrated in a cascade biorefinery process using subcritical water extraction (SWE) prior to bleaching and acid hydrolysis and compared to traditional alkali pretreatments. The proposed SWE process enables the isolation of bioactive arabinoxylans with phenolic acid moieties, thus preserving their antioxidant and antibacterial properties that are lost during alkaline conditions. Additionally, SWE can be combined with subsequent bleaching and acid hydrolysis to obtain CNCs with large aspect ratio, high crystallinity, and thermal stability. The hydrothermal process also enables the recovery of silica particles that are lost during the alkali step but can be recovered after the isolation of the CNCs. Our biorefinery strategy results in the integral valorization of rice husk into their molecular components (bioactive arabinoxylans, cellulose nanocrystals, and silica particles), which can be used as additives for food applications and as reinforcing agents in biocomposite materials, respectively., The authors thank the Ministerio de Economía y Competitividad (Spain) for the financial support provided through Project AGL2016-76699-R. Author Raquel Requena thanks the Ministry of Education, Culture and Sport (Spain) for the FPU (FPU13/03444) Grant. This research work was also financed with a Short Term Scientific Mission of the COST Action FP1405.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Melt processability, characterization, and antibacterial activity of compression-molded green composite sheets made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced with coconut fibers impregnated with oregano essential oil

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Hilliou, Loic
  • Meléndez-Rodríguez, Beatriz
  • Figueroa-López, Kelly Johana
  • Madalena, Daniel
  • Cabedo, Luis
  • Covas, Jose A.
  • Vicente, Antonio
  • Lagaron, Jose M.
[EN] New packaging materials based on green composite sheets consisting of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and coconut fibers (CFs) were obtained by twin-screw extrusion (TSE) followed by compression molding. The effect of varying the CF weight content, i.e. 1, 3, 5, and 10¿wt.-%, and the screw speed during melt processing, i.e. 75, 150, and 225¿rpm, on both the aspect ratio and dispersion of the fibers was analyzed and related to the properties of the compression-molded sheets. Finally, the CFs were impregnated with oregano essential oil (OEO) by an innovative spray coating methodology and then incorporated into PHBV at the optimal processing conditions. The functionalized green composite sheets presented bacteriostatic effect against Staphylococcus aureus from fiber contents as low as 3¿wt.-%. Therefore, the here-prepared CFs can be successfully applied as natural vehicles to entrap extracts and develop green composites of high interest in active food packaging to provide protection and shelf life extension., This research was funded by the EU H2020 project YPACK (reference number 773872), the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684), and the BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by the European Regional Development Fund (ERDF) under the scope of Norte2020 - Programa Operacional Regional do Norte. Prof. Sergio Torres-Giner wants to thank the European Cooperation in Science and Technology (COST) Action FP1405, ActInPak, for financial support during his Short Term Scientific Mission (STSM) at the University of Minho.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation, characterization and antimicrobial properties of electrospun polylactide films containing Allium ursinum L. extract

  • Radusin, Tanja
  • Stupar, Alena
  • Ristic, Ivan
  • Miletic, Aleksandra
  • Novakovic, Aleksandra
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Novel active films of polylactide (PLA) containing extract of Allium ursinum L. (AU), also called wild garlic, at 10 wt% were succesfully prepared by the electrospinning technology. Electrospinning of the AU-containing PLA solutions yielded fibers in the 1-2 mu m range with a beaded-like morphology, suggesting that the AU extract was mainly encapsulated in certain fiber regions. The resultant electrospun mats were then subjected to annealing at 135 degrees C to obtain continuous films of application interest in active packaging. The film cross-sections revealed that the AU extract was incorporated into the PLA matrix in the form of micro-sized droplets. The thermal properties showed that the AU extract addition plasticized the PLA matrix and also lowered its crystallinity degree as it disrupted the ordering of the PLA chains by hindering their folding into the crystalline lattice. Thermal stability analysis indicated that the natural extract positively contributed to a delay in thermal degradation of the biopolymer and it was thermally stable when encapsulated in the PLA film. The AU extract incorporation also produced a mechanical reinforcement on the electrospun PLA films and improved slightly the water barrier performance. Finally, a significant antimicrobial activity of the electrospun PLA films containing the natural extract was achieved against foodborne bacteria., This paper has been supported by the COST Action FP1405 Active and intelligent fiber-based packaging - innovation and market introduction (ActInPak), FOODStars project Food Product Development Cycle: Frame for stepping Up Research Excellence of FINS (Grant Agreement 692276), the Spanish Ministry of Science, Innovation, and Universities (MICIU, project AGL2015-63855-C2-1-R) and the EU H2020 project YPACK (reference number 773872). Torres-Giner also acknowledges MICIU for his Juan de la Cierva-Incorporacion contract (IJCI-2016-29675).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Active packaging applications for food

  • Yildirim, Selçuk
  • Röcker, Bettina
  • Pettersen, Marit Kvalvåg
  • Nilsen‐Nygaard, Julie
  • Ayhan, Zehra
  • Rutkaite, Ramune
  • Radusin, Tanja
  • Suminska, Patrycja
  • Marcos, Begonya
  • Coma, Véronique
The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, “healthier,” and higher‐quality foods, ideally with a long shelf‐life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to “deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food.” Active packaging materials are thereby “intended to extend the shelf‐life or to maintain or improve the condition of packaged food.” Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide‐releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Active packaging applications for food

  • Yildirim, Selçuk
  • Röcker, Bettina
  • Pettersen, Marit Kvalvåg
  • Nilsen‐Nygaard, Julie
  • Ayhan, Zehra
  • Rutkaite, Ramune
  • Radusin, Tanja
  • Suminska, Patrycja
  • Marcos, Begonya
  • Coma, Véronique
The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, “healthier,” and higher‐quality foods, ideally with a long shelf‐life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to “deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food.” Active packaging materials are thereby “intended to extend the shelf‐life or to maintain or improve the condition of packaged food.” Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide‐releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption., info:eu-repo/semantics/acceptedVersion
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Holistic approach to a successful market implementation of active and intelligent food packaging

  • Tiekstra, Sanne
  • Dopico Parada, Ana Isabel
  • Koivula, Hanna
  • Lahti, Johanna
  • Buntinx, Mieke
Market implementation of active and intelligent packaging (AIP) technologies specifically for fiber-based food packaging can be hindered by various factors. This paper highlights those from a social, economic, environmental, and legislative point of view, and elaborates upon the following aspects mainly related to interactions among food packaging value chain stakeholders: (i) market drivers that affect developments, (ii) the gap between science and industry, (iii) the gap between legislation and practice, (iv) cooperation between the producing stakeholders within the value chain, and (v) the gap between the industry and consumers. We perceive these as the most influential aspects in successful market implementation at a socioeconomic level. The findings are supported by results from quantitative studies analyzing consumer buying expectations about active and intelligent packaging (value perception of packaging functions, intentions to purchase AIP, and willingness to pay more) executed in 16 European countries. Finally, in this paper, we discuss approaches that could direct future activities in the field towards industrial implementation., European Cooperation in Science and Technology | Ref. COST action FP1405 - Active and intelligent fibre-based packaging - innovation and market introduction (ActInPak)
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Building value with packaging: Development and validation of a measurement scale

  • Dopico Parada, Ana Isabel
  • López Miguens, María Jesús
  • Álvarez González, Paula
In the absence of studies that include holistically all the current functionalities of packaging, this research develops and validates at confirmatory level a third-order scale for measuring the functional value of packaging. The measure accounts for protection, convenience, portability & storage, information, branding, engagement, sustainability and economy and considers active and intelligent functions. The psychometric properties of the scale are analysed in a total of 5 studies. Results indicates that protection, sustainability and information are the most relevant functions. This scale amounts to a useful tool that can serve as a framework for managers in numerous sectors.