Pasar al contenido principal

MATERIALES QUE INDUCEN LA FIBRILOGENESIS DE LA FIBRONECTINA PARA PRODUCIR MICROAMBIENTES SINERGICOS EN LOS FACTORES DE CRECIMIENTO

MAT2012-38359-C03-01

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conformation and dynamics of a diluted chain in the presence of an adsorbing wall: A simulation with the bond fluctuation model

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Molina Mateo, José|||0000-0002-0531-9876
The bond fluctuation model has been used to simulate the adsorption process of a single long polymer chain on an adsorbing surface. Simulations start at high temperature with the chain in an equilibrium coil structure. The inter- and intra chain energy potential were selected in such a way that on cooling the polymer chain vitrifies without any indication of chain ordering or chain folding. The structure attained on cooling is analysed for arrange of values of the interaction potential between the surface and the polymer segments. Adsorption is measured by the fraction of polymer segments situated on the adsorbingwallwhilst crystalline ordering is characterized by the pair correlation function g(r), the bond order parameter P2(r) and the bond correlation functionM(j). Isothermal adsorption is followed as well as a function of temperature. The work shows that adsorbing surface nucleates crystalline order by suppressing one dimension in the segmental mobility of the polymer chain, along with factors as thermal treatment and inter and intra-potentials., RSS gratefully acknowledges the support of the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under the project MAT2012-38359-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of Material-Driven Fibronectin Fibrillogenesis in Protein Remodeling

  • Llopis Hernández, Virginia
  • Altankov, George
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
[EN] Protein remodeling at the cell material interface is an important phenomenon that should be incorporated into the design of advanced biomaterials for tissue engineering. In this work, we address the relationship between fibronectin (FN) activity at the material interface and remodeling, including proteolytic cascades. To do so, we studied FN adsorption on two chemically similar substrates, poly(ethyl acrylate) (PEA) and poly(methyl acrylate) (PMA), which resulted in different distribution and conformation of the protein at the material interface: FN organized spontaneously upon adsorption on PEA into physiological-like fibrils, through a process called material-driven FN fibrillogenesis. The amount of adsorbed FN and its conformation were investigated in two different coating concentrations (2 and 20 μg/mL). Since FN activity at the material interface determines the initial cellular response, we followed the formation of focal adhesions (vinculin) and subsequent cell signaling by focal adhesion kinase (FAK) expression and its phosphorylation (pFAK). More detailed studies were performed to get further insights into integrin binding by crosslinking and extraction followed by immunofluorescence, as well as protein and gene expression for α5 and αv. To correlate cell adhesion with matrix degradation, gene expression and activity (zymography) of matrix metalloproteinases (MMPs) were measured. Overall, we demonstrated that the material-driven FN fibrillogenesis triggers proteolytic activity: MMP activity was higher on the material-driven FN fibrils, as a compensatory mechanism to the inability of cells to reorganize this FN network., We acknowledge the financial support of the Spanish Ministry of Science and Innovation through the project MAT2012-38359-C03-01/03, the support of CIBER-BBN, and the fellowship EEBB-I-13-07652.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MC3T3-E1 Cell Response to Ti1-xAgx and Ag-TiNx Electrodes Deposited on Piezoelectric Poly(vinylidene fluoride) Substrates for Sensor Applications

  • Marques, S.M.
  • Carvalho, I.
  • Fialho, L.
  • Lanceros-Méndez, S.
  • Henriques, M.
  • Carvalho, S.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
In the sensors field, titanium based coatings are being used for the acquisition/application of electrical signals from/to piezoelectric materials. In this particular case, sensors are used to detect dynamic mechanical loads at early stages after intervention of problems associated with prostheses implantation. The aim of this work is to select an adequate electrode for sensor applications capable, in an initial stage to avoid bone cell adhesion, but at a long stage, permit osteointegration and osteoinduction. This work reports on the evaluation of osteoblast MC3T3-E1 cells behavior in terms of proliferation, adhesion and long-term differentiation of two different systems used as sensor electrodes: Ti1-xAgx and Ag-TiNx deposited by d.c. and pulsed magnetron sputtering at room temperature on poly(vinylidene fluoride) (PVDF). The results indicated an improved effect of Ag-TiNx electrodes compared with Ti1-xAgx and TiN, in terms of diminished cell adhesion and proliferation at an initial cell culture stage. Nevertheless, when cell culture time is longer, cells grown onto Ag-TiNx electrodes are capable to proliferate and also differentiate at proper rates, indicating the suitability of this coating for sensor application in prostheses devices. Thus, the Ag-TiNx system was considered the most promising electrode for tissue engineering applications in the design of sensors for prostheses to detect dynamic mechanical loads., The author S.M.M. gratefully acknowledge the funding form the Portuguese national funds through the FCT-Fundacao para a Ciancia e a Tecnologia, (grant SFRH/BD/71259/2010). Also thank support by FEDER through the COMPETE Program and by the Fundacao para a Ciencia e a Tecnologia (FCT) in the framework of the Strategic Project PEST-C/FIS/UI607/2014. J.L.G.R. and P.R acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2013-46467-C4-1-R and MAT2012-383.59-C03-01 project (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Found. The authors thank financial support from the Basque Government Industry Department under the ELKARTEK Program. S.L.M. thanks the Diputacion de Bizkaia for financial support under the Bizkaia Talent program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlled Assembly of Fibronectin Nanofibrils Triggered by Random Copolymer Chemistry

  • MNATSAKANYAN, HAYK
  • Grigoriou, Eleni
  • Maturana Candelas, Aarón
  • Rodrigo Navarro, Aleixandre
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Sabater i Serra, Roser|||0000-0002-5550-7066
Fibronectin fibrillogenesis is the physiological process by which cells elaborate a fibrous FN matrix. Poly(ethyl acrylate), PEA, has been described to induce a similar process upon simple adsorption of fibronectin (FN) from a protein solution-in the absence of cells-leading to the so-called material-driven fibronectin fibrillogenesis. Poly(methyl acrylate), PMA, is a polymer with very similar chemistry to PEA, on which FN is adsorbed, keeping the globular conformation of the protein in solution. We have used radical polymerization to synthesize copolymers with controlled EA/MA ratio, seeking to modulate the degree of FN fibrillogenesis. The physicochemical properties of the system were studied using dynamic mechanical analysis, differential scanning calorimetry, and water contact angle. Both the degree of FN fibrillogenesis and the availability of the integrin binding region of FN directly depend on the percentage of EA in the copolymer, whereas the same total amount of FN was adsorbed regardless the EA/MA ratio. Cell morphology adhesion and differentiation of murine C2C12 were shown to depend on the degree of FN fibrillogenesis previously attained on the material surface. Myogenic differentiation was enhanced on the copolymers with higher EA content, i.e. more interconnected FN fibrils., M.S.S. acknowledges the ERC through HealInSynergy 306990. The support of the project MAT2012-38359-C03-01 (including the FEDER financial support) and well as CIBER-BBN [CIBER de Bioingenieria, Biomateriales y Nanomedicina (CIBER-BBN, promoted by IS CIII), Spain] is acknowledged. We also acknowledge the Electron Microscopy Service of the UPV for AFM support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional Living Biointerphases

  • Saadeddin Saadeddin, Anas
  • Rodrigo Navarro, Aleixandre
  • Monedero, Vicente
  • González-Martín, María Luisa
  • Navarro, David
  • García, Andrés J.
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
Lactococcus lactis is modified to express a fibronectin fragment (FNIII₇₋₁₀) as a membrane protein. This interphase, based on a living system, can be further exploited to provide spatio-temporal factors to direct cell function at the material interface. This approach establishes a new paradigm in biomaterial surface functionalization for biomedical applications., This work was supported by MAT2012-38359-C03-01, MAT2010-10497-E and MAT2009-14695-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biocompatibility and Biomechanical Effect of Single Wall Carbon Nanotubes Implanted in the Corneal Stroma: A Proof of Concept Investigation

  • Vega-Estrada, Alfredo
  • Silvestre-Albero, Joaquín
  • Rodríguez, Alejandra E.
  • Rodríguez-Reinoso, Francisco
  • Antolinos Turpín, Carmen María
  • Bataille, Laurent
  • Alió, Jorge L.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
Corneal ectatic disorders are characterized by a progressive weakening of the tissue due to biomechanical alterations of the corneal collagen fibers. Carbon nanostructures, mainly carbon nanotubes (CNTs) and graphene, are nanomaterials that offer extraordinary mechanical properties and are used to increase the rigidity of different materials and biomolecules such as collagen fibers. We conducted an experimental investigation where New Zealand rabbits were treated with a composition of CNTs suspended in balanced saline solution which was applied in the corneal tissue. Biocompatibility of the composition was assessed by means of histopathology analysis and mechanical properties by stress-strain measurements. Histopathology samples stained with blue Alcian showed that there were no fibrous scaring and no alterations in the mucopolysaccharides of the stroma. It also showed that there were no signs of active inflammation. These were confirmed when Masson trichrome staining was performed. Biomechanical evaluation assessed by means of tensile test showed that there is a trend to obtain higher levels of rigidity in those corneas implanted with CNTs, although these changes are not statistically significant (p > 0.05). Implanting CNTs is biocompatible and safe procedure for the corneal stroma which can lead to an increase in the rigidity of the collagen fibers., The authors would like to acknowledge Professor K. Kaneko for the supply of the SWCNTs. They will also like to acknowledge the support of the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under the project MAT2012-38359-C03-01. This publication has been sponsored in part with the funding of the framework of the Red Tematica de Investigacion Cooperativa en Salud (RETICS), Reference no. RD12/0034/0007, financed by the Instituto Carlos III-General Subdirection of Networks and Cooperative Investigation Centers (R&D&I National Plan 2008-2011) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular dynamics in polymer networks containing caprolactone and ethylene glycol moieties studied by dielectric relaxation spectroscopy

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Escobar Ivirico, Jorge Luis
  • Romero Colomer, Francisco José
  • Andrio Balado, A.
Copolymer networks with methacrylate main chain and caprolactone and ethylene glycol side groups were obtained by free radical copolymerisation of caprolactone methacrylate (CLMA) and poly(ethylene glycol) methacrylate (PEGMA). Dielectric relaxation spectroscopy was used to analyse molecular mobility of the different groups in the system. Only one main dielectric relaxation process was found in CLMA/PEGMA copolymer networks, located between those of the corresponding homonetworks, indicating that the system does not present phase separation. The copolymers show a secondary relaxation process at temperatures below −50 °C, which can be assigned to the overlapping of the corresponding secondary processes for the homopolymer networks; one of them was related to the local mobility of caprolactone units in CLMA and the second one was assigned to the twisting motions within ethylene glycol moiety in PEGMA. Besides the relaxation processes, the mobility of space charges has been analysed by means of conductivity and electric modulus formalisms., The support from the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER funds under the project MAT2012-38359-C03-01 is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric relaxation dynamics of high-temperature piezoelectric polyimide copolymers

  • Maceiras, A.
  • Costa, C. M.
  • Lopes, A. C.
  • San Sebastián, M.
  • Laza, J. M.
  • Vilas, J. L.
  • Andrio Balado, A.
  • Lanceros-Méndez, S.
  • León, L. M.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] Polyimide copolymers have been prepared based on different diamines as comonomers: a diamine without CN groups and a novel synthesized diamine with two CN groups prepared by polycondensation reaction followed by thermal cyclodehydration. Dielectric spectroscopy measurements were performed, and the dielectric complex function, ac conductivity and electric modulus of the copolymers were investigated as a function of CN group content in the frequency range from 0.1 to 107 Hz at temperatures from 25 to 260 °C. For all samples and temperatures above 150 °C, the dielectric constant increases with increasing temperature due to increasing conductivity. The ¿-relaxation is just detected for the sample without CN groups, being this relaxation overlapped by the electrical conductivity contributions in the remaining samples. For the copolymer samples and the polymer with CN groups, an important Maxwell¿Wagner¿Sillars contribution is detected. The mechanisms responsible for the dielectric relaxation, conduction process and electric modulus response have been discussed as a function of the CN group content present in the samples., This work was supported by FEDER through the COMPETE Program and by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Project PESTC/FIS/UI607/2011 and grants SFRH/BD/62507/2009 (A.C.L.) SFRH/BD/68499/2010 (C.M.C.). The authors also thank funding from "Matepro-Optimizing Materials and Processes," ref. NORTE-07-0124-FEDER-000037," co-funded by the "Programa Operacional Regional do Norte" (ON.2-O Novo Norte), under the "Quadro de Referencia Estrategico Nacional" (QREN), through the "Fundo Europeu de Desenvolvimento Regional" (FEDER). RSS acknowledges the support of the Spanish Ministry of Economy and Competitiveness through the project MAT2012-38359-C03-01 (including the FEDER financial support). Authors also thank the Basque Country Government for financial support (ACTIMAT project, ETORTEK Program, IE13-380, and Ayudas para Grupos de Investigacion del Sistema Universitario Vasco Program, IT718-13).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epoxy networks and hydrogels prepared from a,x-diamino terminated poly(oxypropylene)-b-poly(oxyethylene)-bpoly( oxypropylene) and polyoxypropylene bis(glycidyl ether)

  • Krakovský, Ivan
  • Martínez Haya, Rebeca
  • Mohan Dodda, Jagan
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Sabater i Serra, Roser|||0000-0002-5550-7066
A series of hydrophilic epoxy networks was prepared by reaction of a,x-diamino terminated polyoxypropylene-b-polyoxyethylene-b-polyoxypropylene of average molar mass 2000 g/mol with polyoxypropylene bis(glycidyl ether) of average molar mass 640 g/mol. Absence of microphase separation in the networks at ambient and higher temperatures was proved by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Cooling of the networks to subambient temperatures induces microphase separation via crystallization: the crystallites of polyoxyethylene formed act as a reinforcing filler in the surrounding amorphous network phase. Hydrogels obtained by swelling of the networks in water deswell continuously with increasing temperature. The deswelling becomes less pronounced with increasing POE content and decreasing network density of the epoxy network. In cooling of the hydrogels to low temperatures the main part of water crystallizes. Water crystallites are dispersed in the amorphous network swollen with remaining no-crystallized water. The hydrogels prepared can found applications in sensors and actuators working in aqueous environment., The result was developed within the CENTEM project, reg. no. CZ.1.05/2.1.00/03.0088, co-funded by the ERDF as part of the Ministry of Education, Youth and Sports OP RDI programme. The authors appreciate a generous gift of the Jeffamines used in this study, by Huntsman Corporation. RSS acknowledge the support of the Spanish Ministry of Economy and Competitiveness through the project MAT2012-38359-C03-01 (including the FEDER financial support).