Pasar al contenido principal

MATERIALES QUE INDUCEN LA FIBRILOGENESIS DE LA FIBRONECTINA PARA PRODUCIR MICROAMBIENTES SINERGICOS EN LOS FACTORES DE CRECIMIENTO

MAT2012-38359-C03-01

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conformation and dynamics of a diluted chain in the presence of an adsorbing wall: A simulation with the bond fluctuation model

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Molina Mateo, José|||0000-0002-0531-9876
The bond fluctuation model has been used to simulate the adsorption process of a single long polymer chain on an adsorbing surface. Simulations start at high temperature with the chain in an equilibrium coil structure. The inter- and intra chain energy potential were selected in such a way that on cooling the polymer chain vitrifies without any indication of chain ordering or chain folding. The structure attained on cooling is analysed for arrange of values of the interaction potential between the surface and the polymer segments. Adsorption is measured by the fraction of polymer segments situated on the adsorbingwallwhilst crystalline ordering is characterized by the pair correlation function g(r), the bond order parameter P2(r) and the bond correlation functionM(j). Isothermal adsorption is followed as well as a function of temperature. The work shows that adsorbing surface nucleates crystalline order by suppressing one dimension in the segmental mobility of the polymer chain, along with factors as thermal treatment and inter and intra-potentials., RSS gratefully acknowledges the support of the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under the project MAT2012-38359-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of Material-Driven Fibronectin Fibrillogenesis in Protein Remodeling

  • Llopis Hernández, Virginia
  • Altankov, George
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
[EN] Protein remodeling at the cell material interface is an important phenomenon that should be incorporated into the design of advanced biomaterials for tissue engineering. In this work, we address the relationship between fibronectin (FN) activity at the material interface and remodeling, including proteolytic cascades. To do so, we studied FN adsorption on two chemically similar substrates, poly(ethyl acrylate) (PEA) and poly(methyl acrylate) (PMA), which resulted in different distribution and conformation of the protein at the material interface: FN organized spontaneously upon adsorption on PEA into physiological-like fibrils, through a process called material-driven FN fibrillogenesis. The amount of adsorbed FN and its conformation were investigated in two different coating concentrations (2 and 20 μg/mL). Since FN activity at the material interface determines the initial cellular response, we followed the formation of focal adhesions (vinculin) and subsequent cell signaling by focal adhesion kinase (FAK) expression and its phosphorylation (pFAK). More detailed studies were performed to get further insights into integrin binding by crosslinking and extraction followed by immunofluorescence, as well as protein and gene expression for α5 and αv. To correlate cell adhesion with matrix degradation, gene expression and activity (zymography) of matrix metalloproteinases (MMPs) were measured. Overall, we demonstrated that the material-driven FN fibrillogenesis triggers proteolytic activity: MMP activity was higher on the material-driven FN fibrils, as a compensatory mechanism to the inability of cells to reorganize this FN network., We acknowledge the financial support of the Spanish Ministry of Science and Innovation through the project MAT2012-38359-C03-01/03, the support of CIBER-BBN, and the fellowship EEBB-I-13-07652.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MC3T3-E1 Cell Response to Ti1-xAgx and Ag-TiNx Electrodes Deposited on Piezoelectric Poly(vinylidene fluoride) Substrates for Sensor Applications

  • Marques, S.M.
  • Carvalho, I.
  • Fialho, L.
  • Lanceros-Méndez, S.
  • Henriques, M.
  • Carvalho, S.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
In the sensors field, titanium based coatings are being used for the acquisition/application of electrical signals from/to piezoelectric materials. In this particular case, sensors are used to detect dynamic mechanical loads at early stages after intervention of problems associated with prostheses implantation. The aim of this work is to select an adequate electrode for sensor applications capable, in an initial stage to avoid bone cell adhesion, but at a long stage, permit osteointegration and osteoinduction. This work reports on the evaluation of osteoblast MC3T3-E1 cells behavior in terms of proliferation, adhesion and long-term differentiation of two different systems used as sensor electrodes: Ti1-xAgx and Ag-TiNx deposited by d.c. and pulsed magnetron sputtering at room temperature on poly(vinylidene fluoride) (PVDF). The results indicated an improved effect of Ag-TiNx electrodes compared with Ti1-xAgx and TiN, in terms of diminished cell adhesion and proliferation at an initial cell culture stage. Nevertheless, when cell culture time is longer, cells grown onto Ag-TiNx electrodes are capable to proliferate and also differentiate at proper rates, indicating the suitability of this coating for sensor application in prostheses devices. Thus, the Ag-TiNx system was considered the most promising electrode for tissue engineering applications in the design of sensors for prostheses to detect dynamic mechanical loads., The author S.M.M. gratefully acknowledge the funding form the Portuguese national funds through the FCT-Fundacao para a Ciancia e a Tecnologia, (grant SFRH/BD/71259/2010). Also thank support by FEDER through the COMPETE Program and by the Fundacao para a Ciencia e a Tecnologia (FCT) in the framework of the Strategic Project PEST-C/FIS/UI607/2014. J.L.G.R. and P.R acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2013-46467-C4-1-R and MAT2012-383.59-C03-01 project (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Found. The authors thank financial support from the Basque Government Industry Department under the ELKARTEK Program. S.L.M. thanks the Diputacion de Bizkaia for financial support under the Bizkaia Talent program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Scaffolds basados en acrilatos con distinta geometría de poro para regeneración ósea: síntesis y caracterización

  • León Boigues, Laia
[EN] This work is part of the project financed by the Ministry of Economy and Competitiveness (MINECO) and FEDER (project MAT2012-38359-C03-01): "Materials that induce fibronectin fibrillogenesis to produce synergistic factors in microenvironments growth. " The macroporous scaffolds support the regeneration of living tissues, recreating an environment that promotes cell adhesion, proliferation and differentiation. The architectural design not only determines pore cell colonization, also the success of the implant. The behavior of the proteins of the extracellular matrix is another responsible factor. It has been found that substrates of poly (ethyl acrylate) (PEA) have the ability to generate the fibrillogenesis process of fibronectin (FN) in the absence of cells, providing a functional biomimetic interface that stimulates cell activity. In contrast, poly (ethyl methacrylate) (PMA) acquires a globular configuration, with less stimulation of cellular response. Crosslinked films (2D environments) network is expected to show significant differences in the formation of fibrillogenesis. Differences of such networks will be characterized by testing in different solvents as swelling or differential scanning calorimetry. It will be prepared scaffolds with different pore structure and pore size geometry, which will consider whether the conformation of the 3D environments FN is the same as in the film substrates (2D environments). For different pore geometries will be compact as spheres and fibers templates. Spheres template are performed by a press controlling the pressure and temperature. Fibers template will be performed by 3D printing. The morphology of the scaffolds will be observed by Scanning Electron Microscopy and the formation of the FN by Atomic Force Microscopy. After that, the study will be focus specifically on a particular scaffold and work to characterize and determine its porosity, swelling capacity, compression module, among others. The objectives are therefore the study of acrylate-based scaffolds with different pore geometry and make a decision about which would be proposed as the most suitable polymers for bone regeneration. In addition, before reaching it, a study of the most suitable polymer network environments 2D was performed varying the degree of cross-linked thereof. Throughout the study is intended to use different equipment and perform tests of materials characterization, improving knowledge using experimental techniques from materials engineering for biomedical applications., [ES] El presente trabajo se enmarca en el proyecto con financiación del Ministerio de Economía y Competitividad (MINECO) y fondos FEDER (proyecto MAT2012-38359-C03-01): “Materiales que inducen la fibrilogenesis de la fibronectina para producir microambientes sinérgicos en los factores de crecimiento”. Los scaffolds son soportes macroporosos que asisten la regeneración de tejidos vivos, recreando un entorno que promueva la adhesión, proliferación y diferenciación celular. El diseño de la arquitectura de poros condiciona no sólo la colonización celular, sino también el éxito del implante. El comportamiento de las proteínas de la matriz extracelular es otro de los factores responsables. Se ha comprobado que substratos planos de poli(etil acrilato) (PEA) tienen la capacidad de generar el proceso de fibrilogénesis de la fibronectina (FN) en ausencia de células, lo que proporciona una interfase biomimética funcional que estimula la actividad celular. Por el contrario, la FN en substratos de poli(etil metracrilato) (PMA) adquiere una configuración globular, con menor estimulación de la respuesta celular. Se prepararán films (entornos 2D) en los que se variará la cantidad de entrecruzador que se incluye en el polímero para ambos acrilatos, ya que el grado de entrecruzado de la red se espera muestre diferencias significativas en la formación de dicha fibrilogénesis. Se caracterizarán diferencias de dichas redes mediante ensayos como hinchado en diferentes solventes o calorimetría diferencial de barrido. Se prepararán scaffolds con estructura porosa de diferente geometría y tamaño de poro, en la que se estudiará si la conformación de la FN en entornos 3D es la misma que en los substratos planos (entornos 2D). Para obtener las distintas geometrías de poros se emplean plantillas de porógeno compactado en forma de esferas y de fibras. El compactado con esferas se realiza mediante una prensa controlando la presión y temperatura. La plantilla de fibras estará realizada mediante impresión 3D. La morfología de los scaffolds se observará mediante Microscopía Electrónica de Barrido y la conformación de la FN mediante Microscopía de Fuerza Atómica. Una vez comparados, se espera centrar el estudio en un scaffold en concreto y trabajar y caracterizarlo determinando su porosidad, su capacidad de hinchado, módulo de compresión, entre otras. Los objetivos planteados son pues, el estudio de scaffolds de polímeros basados en acrilatos con diferente geometría de poro y determinación de cuál se propondría como más adecuado a la regeneración ósea. Además, antes de llegar a ello, se realizará un estudio de la red polimérica más adecuada en entornos 2D variando el grado de entrecruzado del mismo. Durante todo el estudio se pretende utilizar diferentes equipos y realizar ensayos de caracterización de materiales, lo que permitirá la adquisición de un conocimiento en el uso de técnicas experimentales propias de la ingeniería de materiales para aplicaciones biomédicas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlled Assembly of Fibronectin Nanofibrils Triggered by Random Copolymer Chemistry

  • MNATSAKANYAN, HAYK
  • Grigoriou, Eleni
  • Maturana Candelas, Aarón
  • Rodrigo Navarro, Aleixandre
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Sabater i Serra, Roser|||0000-0002-5550-7066
Fibronectin fibrillogenesis is the physiological process by which cells elaborate a fibrous FN matrix. Poly(ethyl acrylate), PEA, has been described to induce a similar process upon simple adsorption of fibronectin (FN) from a protein solution-in the absence of cells-leading to the so-called material-driven fibronectin fibrillogenesis. Poly(methyl acrylate), PMA, is a polymer with very similar chemistry to PEA, on which FN is adsorbed, keeping the globular conformation of the protein in solution. We have used radical polymerization to synthesize copolymers with controlled EA/MA ratio, seeking to modulate the degree of FN fibrillogenesis. The physicochemical properties of the system were studied using dynamic mechanical analysis, differential scanning calorimetry, and water contact angle. Both the degree of FN fibrillogenesis and the availability of the integrin binding region of FN directly depend on the percentage of EA in the copolymer, whereas the same total amount of FN was adsorbed regardless the EA/MA ratio. Cell morphology adhesion and differentiation of murine C2C12 were shown to depend on the degree of FN fibrillogenesis previously attained on the material surface. Myogenic differentiation was enhanced on the copolymers with higher EA content, i.e. more interconnected FN fibrils., M.S.S. acknowledges the ERC through HealInSynergy 306990. The support of the project MAT2012-38359-C03-01 (including the FEDER financial support) and well as CIBER-BBN [CIBER de Bioingenieria, Biomateriales y Nanomedicina (CIBER-BBN, promoted by IS CIII), Spain] is acknowledged. We also acknowledge the Electron Microscopy Service of the UPV for AFM support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional Living Biointerphases

  • Saadeddin Saadeddin, Anas
  • Rodrigo Navarro, Aleixandre
  • Monedero, Vicente
  • González-Martín, María Luisa
  • Navarro, David
  • García, Andrés J.
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
Lactococcus lactis is modified to express a fibronectin fragment (FNIII₇₋₁₀) as a membrane protein. This interphase, based on a living system, can be further exploited to provide spatio-temporal factors to direct cell function at the material interface. This approach establishes a new paradigm in biomaterial surface functionalization for biomedical applications., This work was supported by MAT2012-38359-C03-01, MAT2010-10497-E and MAT2009-14695-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biocompatibility and Biomechanical Effect of Single Wall Carbon Nanotubes Implanted in the Corneal Stroma: A Proof of Concept Investigation

  • Vega-Estrada, Alfredo
  • Silvestre-Albero, Joaquín
  • Rodríguez, Alejandra E.
  • Rodríguez-Reinoso, Francisco
  • Antolinos Turpín, Carmen María
  • Bataille, Laurent
  • Alió, Jorge L.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
Corneal ectatic disorders are characterized by a progressive weakening of the tissue due to biomechanical alterations of the corneal collagen fibers. Carbon nanostructures, mainly carbon nanotubes (CNTs) and graphene, are nanomaterials that offer extraordinary mechanical properties and are used to increase the rigidity of different materials and biomolecules such as collagen fibers. We conducted an experimental investigation where New Zealand rabbits were treated with a composition of CNTs suspended in balanced saline solution which was applied in the corneal tissue. Biocompatibility of the composition was assessed by means of histopathology analysis and mechanical properties by stress-strain measurements. Histopathology samples stained with blue Alcian showed that there were no fibrous scaring and no alterations in the mucopolysaccharides of the stroma. It also showed that there were no signs of active inflammation. These were confirmed when Masson trichrome staining was performed. Biomechanical evaluation assessed by means of tensile test showed that there is a trend to obtain higher levels of rigidity in those corneas implanted with CNTs, although these changes are not statistically significant (p > 0.05). Implanting CNTs is biocompatible and safe procedure for the corneal stroma which can lead to an increase in the rigidity of the collagen fibers., The authors would like to acknowledge Professor K. Kaneko for the supply of the SWCNTs. They will also like to acknowledge the support of the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds under the project MAT2012-38359-C03-01. This publication has been sponsored in part with the funding of the framework of the Red Tematica de Investigacion Cooperativa en Salud (RETICS), Reference no. RD12/0034/0007, financed by the Instituto Carlos III-General Subdirection of Networks and Cooperative Investigation Centers (R&D&I National Plan 2008-2011) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular dynamics in polymer networks containing caprolactone and ethylene glycol moieties studied by dielectric relaxation spectroscopy

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Escobar Ivirico, Jorge Luis
  • Romero Colomer, Francisco José
  • Andrio Balado, A.
Copolymer networks with methacrylate main chain and caprolactone and ethylene glycol side groups were obtained by free radical copolymerisation of caprolactone methacrylate (CLMA) and poly(ethylene glycol) methacrylate (PEGMA). Dielectric relaxation spectroscopy was used to analyse molecular mobility of the different groups in the system. Only one main dielectric relaxation process was found in CLMA/PEGMA copolymer networks, located between those of the corresponding homonetworks, indicating that the system does not present phase separation. The copolymers show a secondary relaxation process at temperatures below −50 °C, which can be assigned to the overlapping of the corresponding secondary processes for the homopolymer networks; one of them was related to the local mobility of caprolactone units in CLMA and the second one was assigned to the twisting motions within ethylene glycol moiety in PEGMA. Besides the relaxation processes, the mobility of space charges has been analysed by means of conductivity and electric modulus formalisms., The support from the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER funds under the project MAT2012-38359-C03-01 is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric relaxation dynamics of high-temperature piezoelectric polyimide copolymers

  • Maceiras, A.
  • Costa, C. M.
  • Lopes, A. C.
  • San Sebastián, M.
  • Laza, J. M.
  • Vilas, J. L.
  • Andrio Balado, A.
  • Lanceros-Méndez, S.
  • León, L. M.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] Polyimide copolymers have been prepared based on different diamines as comonomers: a diamine without CN groups and a novel synthesized diamine with two CN groups prepared by polycondensation reaction followed by thermal cyclodehydration. Dielectric spectroscopy measurements were performed, and the dielectric complex function, ac conductivity and electric modulus of the copolymers were investigated as a function of CN group content in the frequency range from 0.1 to 107 Hz at temperatures from 25 to 260 °C. For all samples and temperatures above 150 °C, the dielectric constant increases with increasing temperature due to increasing conductivity. The ¿-relaxation is just detected for the sample without CN groups, being this relaxation overlapped by the electrical conductivity contributions in the remaining samples. For the copolymer samples and the polymer with CN groups, an important Maxwell¿Wagner¿Sillars contribution is detected. The mechanisms responsible for the dielectric relaxation, conduction process and electric modulus response have been discussed as a function of the CN group content present in the samples., This work was supported by FEDER through the COMPETE Program and by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Project PESTC/FIS/UI607/2011 and grants SFRH/BD/62507/2009 (A.C.L.) SFRH/BD/68499/2010 (C.M.C.). The authors also thank funding from "Matepro-Optimizing Materials and Processes," ref. NORTE-07-0124-FEDER-000037," co-funded by the "Programa Operacional Regional do Norte" (ON.2-O Novo Norte), under the "Quadro de Referencia Estrategico Nacional" (QREN), through the "Fundo Europeu de Desenvolvimento Regional" (FEDER). RSS acknowledges the support of the Spanish Ministry of Economy and Competitiveness through the project MAT2012-38359-C03-01 (including the FEDER financial support). Authors also thank the Basque Country Government for financial support (ACTIMAT project, ETORTEK Program, IE13-380, and Ayudas para Grupos de Investigacion del Sistema Universitario Vasco Program, IT718-13).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epoxy networks and hydrogels prepared from a,x-diamino terminated poly(oxypropylene)-b-poly(oxyethylene)-bpoly( oxypropylene) and polyoxypropylene bis(glycidyl ether)

  • Krakovský, Ivan
  • Martínez Haya, Rebeca
  • Mohan Dodda, Jagan
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Sabater i Serra, Roser|||0000-0002-5550-7066
A series of hydrophilic epoxy networks was prepared by reaction of a,x-diamino terminated polyoxypropylene-b-polyoxyethylene-b-polyoxypropylene of average molar mass 2000 g/mol with polyoxypropylene bis(glycidyl ether) of average molar mass 640 g/mol. Absence of microphase separation in the networks at ambient and higher temperatures was proved by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Cooling of the networks to subambient temperatures induces microphase separation via crystallization: the crystallites of polyoxyethylene formed act as a reinforcing filler in the surrounding amorphous network phase. Hydrogels obtained by swelling of the networks in water deswell continuously with increasing temperature. The deswelling becomes less pronounced with increasing POE content and decreasing network density of the epoxy network. In cooling of the hydrogels to low temperatures the main part of water crystallizes. Water crystallites are dispersed in the amorphous network swollen with remaining no-crystallized water. The hydrogels prepared can found applications in sensors and actuators working in aqueous environment., The result was developed within the CENTEM project, reg. no. CZ.1.05/2.1.00/03.0088, co-funded by the ERDF as part of the Ministry of Education, Youth and Sports OP RDI programme. The authors appreciate a generous gift of the Jeffamines used in this study, by Huntsman Corporation. RSS acknowledge the support of the Spanish Ministry of Economy and Competitiveness through the project MAT2012-38359-C03-01 (including the FEDER financial support).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

ROLE OF IONS IN STEM CELLS SIGNALLING

  • Mnatsakanyan Movsesyan, Hayk
[ES] Los procesos de comunicación celular permiten a las células desarrollar una acción coordinada durante la embriogénesis y asimilar de forma coherente las señales recibidas a través del entorno. Algunas de las moléculas señalizadoras más usadas en la clínica y la investigación son las citoquinas. Sin embargo, existe una tendencia creciente en el uso de otro tipo de moléculas, como los iones metálicos. Algunos iones como el calcio y el zinc actúan como segundos mensajeros intracelulares. Otros como el litio son capaces de inactivar proteínas quinasa alterando rutas de señalización. En el desarrollo de esta tesis doctoral, se ha estudiado el efecto del zinc en células musculares de ratón, el papel del zinc en la auto-renovación de células madre embrionarias (CMEs), y el papel del litio en la diferenciación de CMEs. El estudio del efecto del zinc sobre los mioblastos demostró que el zinc es capaz de estimular la diferenciación de los mioblastos. El análisis del zinc intracelular, en los diferentes estadios de diferenciación de las células musculares, demostró que los miotubos eran capaces de albergar mayor cantidad de zinc en su interior. Los resultados mostraron que la adición de zinc extracelular estimula la fosforilación y activación de la proteína quinasa Akt. También se ha visto que el transportador de zinc, Zip7, es crítico en el proceso de diferenciación celular mediado por el zinc, además, su activación incrementa la fosforilación de Akt. La inhibición de Zip7 mediante ARN interferente redujo la fosforilación de Akt y consecuentemente origino unos niveles menores de diferenciación de los mioblastos expuestos a zinc extracelular. Nuestros resultados demuestran que altas concentraciones de zinc extracelular producen un incremento en la diferenciación de los mioblastos debido a la activación de Akt mediada por Zip7. Para el segundo estudio, se analizó el efecto del zinc sobre las CMEs. Como control de mantenimiento de la pluripotencia se usó medio suplementado con factor inhibidor de leucemia (LIF). Se ha observado que la adición externa de concentraciones de zinc superiores a 100 µM produce un incremento inmediato de la concentración de zinc intracelular activando Akt. Los resultados demuestran que las células tratadas con altas concentraciones de zinc mantienen su capacidad de auto-renovación. Para demostrar que el efecto del zinc en CMEs está asociado a la activación de Akt mediada por Zip7, se inhibió la fosforilación de Akt y se silenció Zip7. Ambos abordajes dieron como resultado un incremento en la diferenciación de las células tratadas con zinc. Por otro lado, CMEs cultivadas durante 30 días en presencia de zinc fueron capaces de retener su pluripotencia, mientras que el control sin zinc presentaba rasgos claros de diferenciación celular. Por último, la combinación de LIF con zinc produjo un incremento importante del efecto del LIF en cuanto al mantenimiento de la capacidad de auto-renovación celular. Por último, se ha estudiado el efecto del litio en la diferenciación de las CMEs. El litio es un inhibidor de la glucógeno sintasa quinasa 3ß (GSK3ß). En términos de CMEs, GSK3ß activa los mecanismos de diferenciación. Los resultados obtenidos indican que altas concentraciones de litio (10 mM) son capaces de fosforilar e inhibir la proteína GSK3ß. Sin embargo, en lugar de mantener la pluripotencia, las células madre se diferenciaron hacia el linaje del mesodermo tras 3 días de cultivo. Después de un total de 6 días, las células tratadas con 10 mM de litio presentaron características de endotelio hemogénico. La inhibición de GSK3ß dio como resultado la activación de la proteína ß-catenina, cuya actividad transcripcional es necesaria para la hematogénesis embrionaria. La capacidad de las células endoteliales con potencial hemogénico obtenidas de derivar en células madre hematopoyéticas fue confirmada tras su maduración durante 11 día, [CA] Els processos de comunicació cel·lular permeten a les cèl·lules desenvolupar una acció coordinada durant la embriogènesis y assimilar de forma coherent als senyals rebudes a través de l'entorn. Algunes de les molècules senyalitzadores més usades en la clínica i la investigació són les citocines. No obstant, hi ha una tendència creixent en l'ús d'un altre tipus de molècules, com els ions metàl·lics. Alguns ions com el calci i el zinc són capaços de dur a terme funcions de missatger secundari. Altres com el liti són capaços d'inactivar proteïnes quinasa alterant rutes de senyalització. Durant el desenvolupament d'aquest treball de tesi doctoral, s'ha estudiat l'efecte del zinc sobre mioblasts de ratolí, el paper del zinc en l'auto-renovació de les cèl·lules mare embrionàries (CMEs), i el paper del liti sobre la diferenciació de les CMEs. L'estudi de l'efecte del zinc sobre els mioblasts ha demostrat que el zinc és capaç d'incrementar la diferenciació dels mioblasts. L'anàlisi del zinc intracel·lular ha demostrat que els mioblasts diferenciats eren capaços d'albergar major quantitat de zinc intracel·lular. Els resultats han mostrat que suplementar les cèl·lules amb zinc extracel·lular produïx una major fosforilació i activació de la proteïna quinasa Akt. D'altra banda, s'ha observat que el transportador de zinc Zip7 es crític per a la diferenciació cel·lular mediada pel zinc. S'ha demostrat que l'activació d'aquest transportador mitjançant zinc extracel·lular és capaç d'incrementar la fosforilació d'Akt. La inhibició d'aquest transportador mitjançant ARN interferent ha donat com a resultat una menor fosforilació d'Akt i una menor diferenciació dels mioblasts exposats a zinc. Aquests resultats demostren que altes concentracions de zinc extracel·lular produeixen un incrementar la diferenciació dels mioblasts a causa de l'activació d'Akt per mitja de Zip7. Per al segon estudi, s'ha analitzat l'efecte del zinc sobre les CMEs. Com a control de manteniment de la pluripotència es va usar medi suplementat amb factor inhibidor de leucèmia (LIF). S'ha observat que les concentracions extracel·lulars de zinc a partir de 100 µM produïxen un increment immediat de la concentració intracel·lular, produint l'activació d'Akt per mitja de Zip7. Les CMEs tractades amb altes concentracions de zinc mantenen l'auto-renovació. Per demostrar que aquest efecte està associat a l'activació d'Akt mediada per Zip7, es va inhibir la fosforilació d'Akt i es va silenciar el transportador Zip7. Tots dos abordatges han donat com a resultat un increment en la diferenciació de les CMEs tractades amb zinc. D'altra banda, les CMEs van ser capaços de retenir la seva pluripotència després de ser cultivades durant 30 dies en presència de zinc, mentre que el control sense zinc presentava trets clars de diferenciació cel·lular. Finalment, la combinació de LIF amb zinc ha produit un increment sinèrgic de l'efecte del LIF. Finalment, també s'ha estudiat l'efecte del liti en la diferenciació de les CMEs. El liti és un inhibidor de la glicogen sintasa quinasa 3 beta (GSK3ß). En termes de CMEs, aquesta proteïna activa els mecanismes de diferenciació. Els resultats obtinguts indiquen que altes concentracions de liti (10 mM) tenen la capacitat de fosforilar i inhibir la proteïna GSK3ß. No obstant això, en lloc de mantenir la pluripotència, les CMEs es van diferenciar cap al llinatge del mesoderma després de 3 dies. Després d'un total de 6 dies, les cèl·lules tractades amb 10 mM de liti presentaven característiques d'endoteli hemogénic. La fosforilació de GSK3ß va donar com a resultat l'activació de la proteïna ß-catenina, l'activitat trasncripcional d'aquesta proteïna és necessària per a la hematogénesis embrionària. La capacitat de les cèl·lules endotelials amb potencial hemogénic obtingudes de derivar en cèl·lules mare hematopoètiques va ser confirmada després de la, [EN] The cell signalling process allows cells to develop a coordinated action during embryogenesis and assimilate coherently the signals received through the environment. Some of the most currently used signalling molecules in clinics and research are growth factors and cytokines. However, there is a growing trend in the use of other types of molecules, such as metal ions. Some ions such as calcium and zinc are able to carry out secondary messenger functions, transmitting signals in cascade. Others ions, such as lithium, are capable to inactivate protein kinases altering signalling pathways. During the development of this doctoral thesis, we investigated the effect of zinc on mouse muscle cells (myoblasts), the role of zinc in embryonic stem cells (ESCs) self-renewal, and the role of lithium in the differentiation of ESCs. In the first chapter, we showed that zinc is able to increase the differentiation of myoblasts. The analysis of intracellular zinc indicated that the differentiated myoblasts were capable to harbour higher concentration of intracellular zinc than undifferentiated ones. Addition of high concentration of extracellular zinc increased protein kinase Akt phosphorylation and activation. Akt activity is critical for myoblasts differentiation and has been well studied by other authors. Our results indicated that zinc transporter Zip7 was critical for zinc-mediated cell differentiation. It was prior demonstrated that the activation of this transporter by extracellular zinc increased the phosphorylation of Akt. The inhibition of Zip7 by interfering RNA resulted in a lower phosphorylation of Akt and reduced differentiation of the myoblasts exposed to extracellular zinc. These results demonstrated that high concentration of extracellular zinc enhances the differentiation of myoblasts through activation of Akt mediated by Zip7. In the second chapter, we have analysed the effect of zinc on ESCs. Leukaemia inhibitory factor (LIF) was used as pluripotency sustaining factor. We observed that extracellular supplementation of 100 ¿M zinc produced an immediate increase of the intracellular concentration, which resulted in the activation of Akt mediated by Zip7 transporter. ESCs treated with high concentrations of zinc maintained self-renewal. The role of Akt on ESCs self-renewal has been well established in the literature. To demonstrate that this effect is associated with the activation of Akt mediated by Zip7, we inhibited Akt phosphorylation and silenced the expression of Zip7. Both approaches resulted in an increase in the differentiation levels of the ESCs treated with zinc. We further demonstrated that ESCs treated with zinc during 30 days were able to retain their pluripotency, while the control condition cultured 30 days without zinc presented evident traits of spontaneous cellular differentiation. Finally, the combination of LIF with zinc produced a synergistic-like increase in the effect of LIF on ESCs self-renewal. Finally, we addressed the effect of lithium on the differentiation of ESCs. Lithium is an inhibitor of glycogen synthase kinase 3 beta (GSK3ß). In terms of ESCs, GSK3ß activates differentiation mechanisms. Our results indicated that high concentration of lithium (10 mM) was able to phosphorylate and strongly inhibit the activity of GSK3ß. However, instead of maintaining pluripotency, ESCs differentiated into the mesoderm lineage after 3 days of culture. After a total of 6 days, ESCs treated with 10 mM lithium showed haemogenic endothelium characteristics, expressing CD31, Sca-1 and CD31/Sca-1 positive cells. The phosphorylation of GSK3ß resulted in the activation of the ß-catenin protein, whose transcriptional activity is necessary for embryonic hematogenesis. The ability of endothelial cells with hemogenic potential obtained from lithium-treated ESCs to derive into hematopoietic stem cells was confirmed after maturation of these cells, resulting in rounded cell aggregates positive for Sox17., Ministerio de Ciencia, Innovación y Universidades a través de la beca BES-2013-064052 y los proyectos MAT2012-38359-C03-01 y MAT2015-69315-C3-1-R.