Pasar al contenido principal

FUNCIONALIZACION ELECTROQUIMICA DE MATERIALES AVANZADOS PARA APLICACIONES EN ENERGIA Y BIOSENSORES ELECTROQUIMICOS

MAT2013-42007-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocatalytic oxidation of ascorbic acid on mesostructured SiO2-conducting polymer composites

  • Rivero, Omar
  • Huerta, Francisco
  • Montilla, Francisco
  • Sanchis, C.
  • Morallón, Emilia
The conducting self-doping copolymer poly(aniline-co-ABA) preserves its redox activity at pH values as high as 7. This observation was the starting point to synthesize an organic inorganic hybrid composite able to electrochemically oxidize ascorbic acid molecules at that pH. The inorganic part of the catalytic element was an ordered mesoporous electrodeposit of SiO2, which has been used as the template for the electrochemical insertion of the self-doping copolymer. The oxidation of ascorbate ions at a fixed potential on this composite was studied by means of the kinetic model proposed by Bartlett and Wallace (2001). It was observed that the effective kinetic constant K-ME increased significantly but, simultaneously, k'(ME) remained almost constant when the composite was employed as the electrocatalytic substrate. These results were interpreted in the light of two combinations of kinetic constants, which strongly suggested that the increase in K-ME should be ascribed to the improvement in electronic conductivity of the copolymer induced by the highly ordered silica template. (C) 2015 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P), from the Generalitat Valenciana (PROMETE02013/038) and from the Fundacion Ramon Areces is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced removal of 8-quinolinecarboxylic acid in an activated carbon cloth by electroadsorption in aqueous solution

  • López-Bernabeu, S.
  • Ruiz-Rosas, R.
  • Montilla, Francisco
  • Morallón, Emilia
  • Quijada, César|||0000-0002-9965-9651
The effect of the electrochemical treatment (potentiostatic treatment in a filter-press electrochemical cell) on the adsorption capacity of an activated carbon cloth (ACC) was analyzed in relation with the removal of 8-quinolinecarboxylic acid pollutant from water. The adsorption capacity of an ACC is quantitatively improved in the presence of an electric field (electroadsorption process) reaching values of 96% in comparison to 55% in absence of applied potential. In addition, the cathodic treatment results in higher removal efficiencies than the anodic treatment. The enhanced adsorption capacity has been proved to be irreversible, since the removed compound remains adsorbed after switching the applied potential. The kinetics of the adsorption processes is also improved by the presence of an applied potential. (C) 2015 Elsevier Ltd. All rights reserved., Grateful acknowledgement is made to Ministerio de Economia y Competitividad (MAT2013-42007-P, JCI-2012-12664) and Generalitat Valenciana (Prometeo/2013/038) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt- and Ru-doped SnO2-Sb anodes with high stability in alkaline medium

  • Berenguer Betrián, Raúl
  • Sieben, Juan Manuel
  • Quijada Tomás, Cesar
  • Morallón, Emilia
Different Pt- and Ru-doped Ti/SnO2–Sb electrodes were synthesized by thermal decomposition. The effect of the gradual substitution of Sb by Ru in the nominal composition on the physicochemical and electrochemical properties were evaluated. The electrochemical stability of the electrodes was estimated from accelerated tests at 0.5 A cm–2 in 1 M NaOH. Both as-synthesized and deactivated electrodes were thoroughly characterized by scanning electron microscopy (SEM), energy-dispersive X-ray microanalysis (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction analysis (XRD). The incorporation of a small amount (about 3 at. %) of both Pt and Ru into the SnO2–Sb electrodes produced a 400-times increase in their service life in alkaline medium, with no remarkable change in the electrocatalysis of the oxygen evolution reaction (OER). It is concluded that the deactivation of the electrodes is promoted by alkaline dissolution of metal species and coating detachment at high potentials. The introduction of Pt has a coating compacting effect, and Ru(IV), at low amounts until 9.75 at. %, replaces the Sn(IV) cations in the rutile-like SnO2 structure to form a solid solution that strongly increases the stability of the electrodes. The observed Ru segregation and decreased stability for larger Ru contents (x > 9.75 at. %), together with the selective dissolution of Ru after deactivation, suggest that the formation of a homogeneous (RuδSn1−δ)O2 single-phase is crucial for the stabilization of these electrodes., The authors thank the MINECO, FEDER, and Generalitat Valenciana for the financial support (MAT2013-42007-P, PROMETEO2013/028 projects).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The chemical and electrochemical oxidative polymerization of 2-amino-4-tert-butylphenol

  • Abidi, Maali
  • López-Bernabeu, Sara
  • Huerta, Francisco
  • Montilla-Jiménez, Francisco
  • Besbes-Hentati, Salma
  • Morallón, Emilia
[EN] Poly(2-amino-4-tert-butylphenol), poly(2A-4TBP), was synthesized from monomer aqueous solution using either electrochemical or chemical oxidation procedures. Several spectroscopic characterization techniques were employed to gain information on the chemical structure and redox behavior of the obtained materials. It was found that the chemical polymerization product could be described as an oligomer mixture containing up to 16 monomer units. In parallel to other polymers derived from o-aminophenol, phenoxazine rings constitute also the basic structure of poly(2A-4TBP). In addition, the occurrence of N-N couplings, which are favored by the presence of the voluminous tert-butyl substituent, seems also relevant. No significant structural differences were found between the chemically or electrochemically synthesized materials. © 2016 Published by Elsevier Ltd., Financial support from the Spanish Ministerio de Economía y Competitividad and FEDER funds (MAT2013-42007-P) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged. M. Abidi thanks the Ministry of Higher Education and Scientific Research of Tunisia for funding her stay at the University of Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocatalytic degradation of phenol on Pt- and Ru-doped Ti-SnO2-Sb anodes in an alkaline medium

  • Berenguer Betrián, Raúl
  • Sieben, J. M.
  • Morallón, Emilia
  • Quijada, César|||0000-0002-9965-9651
[EN] In this work, the electrocatalytic performance of Ti/SnO2-Sb(13-x)-Pt-Ru(x) anodes (x = 0.0, 3.25 and 9.75 at.%) towards phenolate elimination has been analyzed and compared to those of conventional Ti/RuO2 and Ti/Co3O4 anodes, to evaluate their application for decontamination of concentrated alkaline phenolic wastewaters. The effects of the applied current density and the nature of the anode on the activity, kinetics and current efficiency for phenolate elimination, COD removal and benzoquinone by-product formation/degradation have been thoroughly examined. The Ti/SnO2-Sb-Pt anode exhibits the best electroactivity, fastest kinetics and highest current efficiency among the studied anodes, but poor electrochemical stability. The introduction of small amounts of Ru (3.25–9.75 at.%) brings about a slight loss of the electrocatalytic performance, but it causes a remarkable increase in the stability of the electrode. In terms of energy consumption and stability, the Ti/SnO2-Sb(9.75)-Pt-Ru(3.25) electrode seems to be the most promising anode material for the electrochemical treatment of alkaline phenolic wastewaters. The increase in current density generally leads to significantly faster phenolate, benzoquinone and COD degradations, but with lower efficiency because of an increasing selectivity to water oxidation. A correction of the ideal kinetic model has been proposed to predict the oxidation of organics on non-active metal oxide anodes. ©2016 Elsevier B.V. All rights reserved., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P, IJCI-2014-20012) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enzyme mediated synthesis of polypyrrole in the presence of chondroitin sulfate and redox mediators of natural origin

  • Grijalva-Bustamante, G. A.
  • Evans-Villegas, A. G.
  • del Castillo-Castro, T.
  • Castillo-Ortega, M. M.
  • Cruz-Silva, R.
  • Huerta, Francisco
  • Morallón, Emilia
Polypyrrole (PPy) was synthesized by enzyme mediated oxidation of pyrrole using naturally occurring compounds as redox mediators. The catalytic mechanism is an enzymatic cascade reaction in which hydrogen peroxide is the oxidizer and soybean peroxidase, in the presence of acetosyringone, syringaldehyde or vanillin, acts as a natural catalysts. The effect of the initial reaction composition on the polymerization yield and electrical conductivity of PPy was analyzed. Morphology of the PPy particles was studied by scanning electron microscopy and transmission electron microscopy whereas the chemical structure was studied by X-ray photoelectron and Fourier transformed infrared spectroscopic techniques. The redox mediators increased the polymerization yield without a significant modification of the electronic structure of PPy. The highest conductivity of PPy was reached when chondroitin sulfate was used simultaneously as dopant and template during pyrrole polymerization. Electroactive properties of PPy obtained from natural precursors were successfully used in the amperometric quantification of uric acid concentrations. PPy increases the amperometric sensitivity of carbon nanotube screen-printed electrodes toward uric acid detection. (C) 2016 Elsevier B.V. All rights reserved., This work was supported by the Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico (Grant Ciencia Basica 2012-No 180280). Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P) and from the Generalitat Valenciana (PROMETEO2013/038) is also gratefully acknowledged. Genesis Adilene Grijalva Bustamante acknowledges CONACYT for the scholarship during this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of the direct electron transfer to encapsulated cytochrome c by electrochemical functionalization with a conducting polymer

  • López-Bernabeu, Sara
  • Gamero-Quijano, Alonso
  • Huerta, Francisco
  • Morallón, Emilia
  • Montilla, Francisco
[EN] The present work deals with the direct electrochemistry of cytochrome c (cyt c) encapsulated within a methyl-modified silica film prepared by the sol-gel method. It was observed that the voltammetric currents of the redox processes grow in proportion to the protein amount inserted within the gel up to a limiting value. From that point, recorded currents remain independent of the amount of protein loaded. Such a behavior indicates that a portion of cytochrome c molecules is located in non-accessible sites of the silica matrix. The electrochemical insertion of poly(3,4-ethylenedioxythiophene) (PEDOT) through silica pores was carried out to connect those electrically isolated protein molecules and in situ UV¿vis spectroscopy was used to gain information on the redox process of encapsulated cyt c. It was observed that the presence of conducting polymer gives rise to a 3-fold enhancement in cyt c electrochemical reduction rate at the initial stages of the treatment, irrespective of the amount of inserted polymer. The faster electrochemical reduction rate was obtained after the insertion of 6.45 ¿g PEDOT within a silica gel containing 0.5 mg protein. The presence of low conductivity domains in the conducting polymer or the hindrance to the protein free movement could explain that higher amounts of inserted PEDOT cannot improve the electrochemical reduction rate., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P and MAT2016-76595-R) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged.