Pasar al contenido principal

FUNCIONALIZACION ELECTROQUIMICA DE MATERIALES AVANZADOS PARA APLICACIONES EN ENERGIA Y BIOSENSORES ELECTROQUIMICOS

MAT2013-42007-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocatalytic oxidation of ascorbic acid on mesostructured SiO2-conducting polymer composites

  • Rivero, Omar
  • Huerta, Francisco
  • Montilla, Francisco
  • Sanchis, C.
  • Morallón, Emilia
The conducting self-doping copolymer poly(aniline-co-ABA) preserves its redox activity at pH values as high as 7. This observation was the starting point to synthesize an organic inorganic hybrid composite able to electrochemically oxidize ascorbic acid molecules at that pH. The inorganic part of the catalytic element was an ordered mesoporous electrodeposit of SiO2, which has been used as the template for the electrochemical insertion of the self-doping copolymer. The oxidation of ascorbate ions at a fixed potential on this composite was studied by means of the kinetic model proposed by Bartlett and Wallace (2001). It was observed that the effective kinetic constant K-ME increased significantly but, simultaneously, k'(ME) remained almost constant when the composite was employed as the electrocatalytic substrate. These results were interpreted in the light of two combinations of kinetic constants, which strongly suggested that the increase in K-ME should be ascribed to the improvement in electronic conductivity of the copolymer induced by the highly ordered silica template. (C) 2015 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P), from the Generalitat Valenciana (PROMETE02013/038) and from the Fundacion Ramon Areces is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced removal of 8-quinolinecarboxylic acid in an activated carbon cloth by electroadsorption in aqueous solution

  • López-Bernabeu, S.
  • Ruiz-Rosas, R.
  • Montilla, Francisco
  • Morallón, Emilia
  • Quijada, César|||0000-0002-9965-9651
The effect of the electrochemical treatment (potentiostatic treatment in a filter-press electrochemical cell) on the adsorption capacity of an activated carbon cloth (ACC) was analyzed in relation with the removal of 8-quinolinecarboxylic acid pollutant from water. The adsorption capacity of an ACC is quantitatively improved in the presence of an electric field (electroadsorption process) reaching values of 96% in comparison to 55% in absence of applied potential. In addition, the cathodic treatment results in higher removal efficiencies than the anodic treatment. The enhanced adsorption capacity has been proved to be irreversible, since the removed compound remains adsorbed after switching the applied potential. The kinetics of the adsorption processes is also improved by the presence of an applied potential. (C) 2015 Elsevier Ltd. All rights reserved., Grateful acknowledgement is made to Ministerio de Economia y Competitividad (MAT2013-42007-P, JCI-2012-12664) and Generalitat Valenciana (Prometeo/2013/038) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt- and Ru-doped SnO2-Sb anodes with high stability in alkaline medium

  • Berenguer Betrián, Raúl
  • Sieben, Juan Manuel
  • Quijada Tomás, Cesar
  • Morallón, Emilia
Different Pt- and Ru-doped Ti/SnO2–Sb electrodes were synthesized by thermal decomposition. The effect of the gradual substitution of Sb by Ru in the nominal composition on the physicochemical and electrochemical properties were evaluated. The electrochemical stability of the electrodes was estimated from accelerated tests at 0.5 A cm–2 in 1 M NaOH. Both as-synthesized and deactivated electrodes were thoroughly characterized by scanning electron microscopy (SEM), energy-dispersive X-ray microanalysis (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction analysis (XRD). The incorporation of a small amount (about 3 at. %) of both Pt and Ru into the SnO2–Sb electrodes produced a 400-times increase in their service life in alkaline medium, with no remarkable change in the electrocatalysis of the oxygen evolution reaction (OER). It is concluded that the deactivation of the electrodes is promoted by alkaline dissolution of metal species and coating detachment at high potentials. The introduction of Pt has a coating compacting effect, and Ru(IV), at low amounts until 9.75 at. %, replaces the Sn(IV) cations in the rutile-like SnO2 structure to form a solid solution that strongly increases the stability of the electrodes. The observed Ru segregation and decreased stability for larger Ru contents (x > 9.75 at. %), together with the selective dissolution of Ru after deactivation, suggest that the formation of a homogeneous (RuδSn1−δ)O2 single-phase is crucial for the stabilization of these electrodes., The authors thank the MINECO, FEDER, and Generalitat Valenciana for the financial support (MAT2013-42007-P, PROMETEO2013/028 projects).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The chemical and electrochemical oxidative polymerization of 2-amino-4-tert-butylphenol

  • Abidi, Maali
  • López-Bernabeu, Sara
  • Huerta, Francisco
  • Montilla-Jiménez, Francisco
  • Besbes-Hentati, Salma
  • Morallón, Emilia
[EN] Poly(2-amino-4-tert-butylphenol), poly(2A-4TBP), was synthesized from monomer aqueous solution using either electrochemical or chemical oxidation procedures. Several spectroscopic characterization techniques were employed to gain information on the chemical structure and redox behavior of the obtained materials. It was found that the chemical polymerization product could be described as an oligomer mixture containing up to 16 monomer units. In parallel to other polymers derived from o-aminophenol, phenoxazine rings constitute also the basic structure of poly(2A-4TBP). In addition, the occurrence of N-N couplings, which are favored by the presence of the voluminous tert-butyl substituent, seems also relevant. No significant structural differences were found between the chemically or electrochemically synthesized materials. © 2016 Published by Elsevier Ltd., Financial support from the Spanish Ministerio de Economía y Competitividad and FEDER funds (MAT2013-42007-P) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged. M. Abidi thanks the Ministry of Higher Education and Scientific Research of Tunisia for funding her stay at the University of Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrocatalytic degradation of phenol on Pt- and Ru-doped Ti-SnO2-Sb anodes in an alkaline medium

  • Berenguer Betrián, Raúl
  • Sieben, J. M.
  • Morallón, Emilia
  • Quijada, César|||0000-0002-9965-9651
[EN] In this work, the electrocatalytic performance of Ti/SnO2-Sb(13-x)-Pt-Ru(x) anodes (x = 0.0, 3.25 and 9.75 at.%) towards phenolate elimination has been analyzed and compared to those of conventional Ti/RuO2 and Ti/Co3O4 anodes, to evaluate their application for decontamination of concentrated alkaline phenolic wastewaters. The effects of the applied current density and the nature of the anode on the activity, kinetics and current efficiency for phenolate elimination, COD removal and benzoquinone by-product formation/degradation have been thoroughly examined. The Ti/SnO2-Sb-Pt anode exhibits the best electroactivity, fastest kinetics and highest current efficiency among the studied anodes, but poor electrochemical stability. The introduction of small amounts of Ru (3.25–9.75 at.%) brings about a slight loss of the electrocatalytic performance, but it causes a remarkable increase in the stability of the electrode. In terms of energy consumption and stability, the Ti/SnO2-Sb(9.75)-Pt-Ru(3.25) electrode seems to be the most promising anode material for the electrochemical treatment of alkaline phenolic wastewaters. The increase in current density generally leads to significantly faster phenolate, benzoquinone and COD degradations, but with lower efficiency because of an increasing selectivity to water oxidation. A correction of the ideal kinetic model has been proposed to predict the oxidation of organics on non-active metal oxide anodes. ©2016 Elsevier B.V. All rights reserved., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P, IJCI-2014-20012) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enzyme mediated synthesis of polypyrrole in the presence of chondroitin sulfate and redox mediators of natural origin

  • Grijalva-Bustamante, G. A.
  • Evans-Villegas, A. G.
  • del Castillo-Castro, T.
  • Castillo-Ortega, M. M.
  • Cruz-Silva, R.
  • Huerta, Francisco
  • Morallón, Emilia
Polypyrrole (PPy) was synthesized by enzyme mediated oxidation of pyrrole using naturally occurring compounds as redox mediators. The catalytic mechanism is an enzymatic cascade reaction in which hydrogen peroxide is the oxidizer and soybean peroxidase, in the presence of acetosyringone, syringaldehyde or vanillin, acts as a natural catalysts. The effect of the initial reaction composition on the polymerization yield and electrical conductivity of PPy was analyzed. Morphology of the PPy particles was studied by scanning electron microscopy and transmission electron microscopy whereas the chemical structure was studied by X-ray photoelectron and Fourier transformed infrared spectroscopic techniques. The redox mediators increased the polymerization yield without a significant modification of the electronic structure of PPy. The highest conductivity of PPy was reached when chondroitin sulfate was used simultaneously as dopant and template during pyrrole polymerization. Electroactive properties of PPy obtained from natural precursors were successfully used in the amperometric quantification of uric acid concentrations. PPy increases the amperometric sensitivity of carbon nanotube screen-printed electrodes toward uric acid detection. (C) 2016 Elsevier B.V. All rights reserved., This work was supported by the Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico (Grant Ciencia Basica 2012-No 180280). Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P) and from the Generalitat Valenciana (PROMETEO2013/038) is also gratefully acknowledged. Genesis Adilene Grijalva Bustamante acknowledges CONACYT for the scholarship during this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of the direct electron transfer to encapsulated cytochrome c by electrochemical functionalization with a conducting polymer

  • López-Bernabeu, Sara
  • Gamero-Quijano, Alonso
  • Huerta, Francisco
  • Morallón, Emilia
  • Montilla, Francisco
[EN] The present work deals with the direct electrochemistry of cytochrome c (cyt c) encapsulated within a methyl-modified silica film prepared by the sol-gel method. It was observed that the voltammetric currents of the redox processes grow in proportion to the protein amount inserted within the gel up to a limiting value. From that point, recorded currents remain independent of the amount of protein loaded. Such a behavior indicates that a portion of cytochrome c molecules is located in non-accessible sites of the silica matrix. The electrochemical insertion of poly(3,4-ethylenedioxythiophene) (PEDOT) through silica pores was carried out to connect those electrically isolated protein molecules and in situ UV¿vis spectroscopy was used to gain information on the redox process of encapsulated cyt c. It was observed that the presence of conducting polymer gives rise to a 3-fold enhancement in cyt c electrochemical reduction rate at the initial stages of the treatment, irrespective of the amount of inserted polymer. The faster electrochemical reduction rate was obtained after the insertion of 6.45 ¿g PEDOT within a silica gel containing 0.5 mg protein. The presence of low conductivity domains in the conducting polymer or the hindrance to the protein free movement could explain that higher amounts of inserted PEDOT cannot improve the electrochemical reduction rate., Financial support from the Spanish Ministerio de Economia y Competitividad and FEDER funds (MAT2013-42007-P and MAT2016-76595-R) and from the Generalitat Valenciana (PROMETEO2013/038) is gratefully acknowledged.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synthesis, characterization and X-ray crystal structure of novel nickel Schiff base complexes and investigation of their catalytic activity in the electrocatalytic reduction of alkyl and aryl halides

  • Ourari, Ali
  • Bougossa, Imène
  • Bouacida, Sofiane
  • Aggoun, Djouhra
  • Ruiz-Rosas, Ramiro
  • Morallon, Emilia
  • Merazig, Hocine
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Novel potentially bidentate NO Schiff base ligands, HL1 and HL2 derived from condensation reaction of 2′-methoxyphenyl-2-ethylamine with salicylaldehyde (HL1) and with 2-hydroxy-4-methoxybenzaldehyde (HL2), and their nickel complexes were synthesized and characterized by usual spectroscopic techniques such as FT-IR, UV–Vis, 1H NMR, 13C NMR and elemental analysis. It was revealed that the bidentate Schiff base ligands coordinate with Ni(II) ions yielding mononuclear complexes with 1:2 (metal/ligand) stoichiometry. This result has been determined by using X-ray crystallographic technique of HL2 and the nickel complex derived from HL1(Ni(II)-2L1). So, the structural studies showed that the two Ni(II) complexes adopt a square-planar geometry around the central metal ion. Cyclic voltammetry studies were investigated in 0.1 M TBAP in DMF solution and indicate that the nickel complexes show one reduction wave related to Ni(II)/Ni(I) redox couple. The electrocatalytical properties of these complexes were also studied in the same electrolyte medium. Their electrocatalytic performances have been tested toward the electroreduction reaction of bromocyclopentane and iodobenzene, showing a promoted activity in the case of the Ni(II)-2L2 complex.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrocatalytic oxidation of ascorbic acid on mesostructured SiO2-conducting polymer composites

  • Rivero, Omar
  • Huerta Arráez, Francisco
  • Montilla, Francisco
  • Sanchis Bermúdez, Carlos
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The conducting self-doping copolymer poly(aniline-co-ABA) preserves its redox activity at pH values as high as 7. This observation was the starting point to synthesize an organic–inorganic hybrid composite able to electrochemically oxidize ascorbic acid molecules at that pH. The inorganic part of the catalytic element was an ordered mesoporous electrodeposit of SiO2, which has been used as the template for the electrochemical insertion of the self-doping copolymer. The oxidation of ascorbate ions at a fixed potential on this composite was studied by means of the kinetic model proposed by Bartlett and Wallace (2001). It was observed that the effective kinetic constant KME increased significantly but, simultaneously, k′ME remained almost constant when the composite was employed as the electrocatalytic substrate. These results were interpreted in the light of two combinations of kinetic constants, which strongly suggested that the increase in KME should be ascribed to the improvement in electronic conductivity of the copolymer induced by the highly ordered silica template.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrodeposition of 4,4′-di-tert-butylbiphenyl peroxide from the anodic oxidation of p-tert-butylphenol in an alkaline acetonitrile solution

  • Abidi, Maali
  • Derbel, Najoua
  • Hkiri, Rihab
  • Sbihi, Hasen Mohamed
  • Said, Hechmi
  • Morallon, Emilia
  • Besbes-Hentati, Salma
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The electrogeneration of pure 4,4′-di-tert-butylbiphenyl peroxide as an electrodeposit could be achieved on a platinum electrode through the anodic oxidation of p-tert butylphenol in the presence of Lutidine, in addition to several soluble oligomers. The electrochemical and theoretical studies have shown that the favored coupling reaction corresponds to the O–O bond, albeit it is generally being considered unstable. Without the strong base, a mixture of trimer, tetramer and pentamer was deposited. The peroxide product presents a different electroactivity to that of the phenolic compound, with the appearance of a redox process involving cathodic and anodic symmetrical peaks at −0.10/0.15 V versus SCE, which indicates the preference of the polymer to adhere onto the electrode surface. The thermal degradation has also been analyzed. Quantum-chemical calculations reveal the reason for the oxygen–oxygen coupling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

PANI-derived polymer/Al2O3 nanocomposites: synthesis, characterization, and electrochemical studies

  • Benykhlef, S.
  • Bekhoukh, A.
  • Berenguer Betrián, Raúl
  • Benyoucef, Abdelghani
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
This paper presents the physicochemical, conductive, and electrochemical properties of different polyaniline (PANI)-derived polymer/Al2O3 nanocomposites synthesized by chemical oxidation polymerization method carried out in two stages: first, activation of the surface of the Al2O3 nanoparticles by hydrochloric acid and second, polymerization of 2-chloroaniline (2ClANI), aniline (ANI), and the copolymer (2ClANI-ANI) in the presence of Al2O3 by using ammonium persulfate as oxidant in aqueous hydrochloric acid. XRD and TEM results reveal the growth of the polymers on Al2O3 nanoparticles and the formation of PANI-derived polymer/Al2O3 nanocomposites. FTIR and UV-Vis show a systematic shifting of the characteristic bands of the polymers with the presence of Al2O3 nanoparticles. Moreover, these nanoparticles enhance the thermal stability of the polymers, as found by thermogravimetric analysis (TGA). Although the incorporation of Al2O3 nanoparticles reduces the electric conductivity of the polymers, the resulting nanocomposites still keep high conductivities, ranging between 0.3 × 10−2 and 9.2 × 10−2 S cm−1. As a result, the polymer/Al2O3 nanocomposites exhibit a good voltammetric response. All these synergetic features of the nanocomposites are assigned to the effective interaction of the polymers and Al2O3 particles at nanoscale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrobleaching of cotton fabrics in sodium chloride solution

  • Vitero, F.
  • Monllor, Pablo
  • Bonet-Aracil, María Ángeles
  • Morallon, Emilia
  • Quijada Tomás, César
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The objective of the paper is to describe an alternative method based on electrochemistry to bleach cotton fabrics. Electrolysis of cotton fabrics soaked in proper electrolyte as a bleaching technology has been studied in this work. Some experiments have been conducted by applying this technique to see the whiteness index effect on fabric cotton. The duration of every experiment was two hours, and it has been applied different currents to study the whiteness index, as well as wetting agent has been used. Once the optimal conditions have been established, a treatment with reuse of the electrolyte and wetting agent has been carried out and six samples have been analysed in these conditions. It has been observed how the cotton fabric was bleaching with the same electrolyte and the whiteness index was similar every time and better than the conventional treatment. In addition, resistance and surface morphology did not present any noticeable weakness at fabrics submitted to electrolysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Molecularly imprinted silica films prepared by electroassisted deposition for the selective detection of dopamine

  • Porcel-Valenzuela, María
  • Salinas-Castillo, Alfonso
  • Morallon, Emilia
  • Montilla, Francisco
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Dopamine (DA) can be detected by electrochemical oxidation in conventional electrodes. However, the presence of other oxidizable species (interferents) usually present in physiological fluids at high concentrations (like ascorbic acid) makes very difficult its electrochemical detection. In the present work, glassy carbon electrodes have been modified with molecularly imprinted silica (MIS) films prepared by electroassisted deposition of sol–gel precursors. The production of MIS films was performed by adding the template molecule (DA) to the precursor sol. The molecular impression of silica was assessed showing a high coherency allowing a filtering capacity in the molecular scale. The MIS-modified electrodes present a high selectivity for the detection of DA in neutral or acidic solutions. The MIS-modified electrodes allow the amperometric determination of dopamine in solutions containing ascorbic acid with molar ratios lower than 1:50,000.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A novel conducting nanocomposite obtained by p-anisidine and aniline with titanium(IV) oxide nanoparticles: Synthesis, Characterization, and Electrochemical properties

  • Chouli, Faïza
  • Radja, Imane
  • Morallon, Emilia
  • Benyoucef, Abdelghani
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Nanocomposites were successfully synthesized by the oxidative polymerization of p-anisidine and/or aniline monomers (at initial “p-anisidine:aniline” mole ratios of “100 : 0,” 50 : 50,” and “0 : 100”) with titanium(IV) oxide nanoparticles, in the presence of hydrochloric acid as a dopant with ammonium persulfate as an oxidant. The morphological, structural, conductivity, and electrochemical properties of the synthesized nanocomposites were studied using Transmission Electron Microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and UV–vis spectroscopies. The presence of polymer on TiO2 nanoparticles in samples nanocomposites was confirmed by the Transmission Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy. The thermal stability of samples nanocomposites were evaluated using the Thermogravimetric Analysis. Electrical conductivity of nanocomposites obtained is in the range of 0.08 − 0.91 S cm−1. The electrochemical behavior of the polymers extracted from the nanocomposites has been analyzed by cyclic voltammetry. Good electrochemical response has been observed for polymer films; the observed redox processes indicate that the polymerization on TiO2 nanoparticles produces electroactive polymers. These composite microspheres can potentially be used in commercial applications as fillers for antistatic and anticorrosion coatings.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced removal of 8-quinolinecarboxylic acid in an activated carbon cloth by electroadsorption in aqueous solution

  • López-Bernabeu, Sara
  • Ruiz-Rosas, Ramiro
  • Quijada Tomás, César
  • Montilla, Francisco
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
The effect of the electrochemical treatment (potentiostatic treatment in a filter-press electrochemical cell) on the adsorption capacity of an activated carbon cloth (ACC) was analyzed in relation with the removal of 8-quinolinecarboxylic acid pollutant from water. The adsorption capacity of an ACC is quantitatively improved in the presence of an electric field (electroadsorption process) reaching values of 96% in comparison to 55% in absence of applied potential. In addition, the cathodic treatment results in higher removal efficiencies than the anodic treatment. The enhanced adsorption capacity has been proved to be irreversible, since the removed compound remains adsorbed after switching the applied potential. The kinetics of the adsorption processes is also improved by the presence of an applied potential.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Pt- and Ru-Doped SnO2–Sb Anodes with High Stability in Alkaline Medium

  • Berenguer Betrián, Raúl
  • Sieben, Juan Manuel
  • Quijada Tomás, César
  • Morallon, Emilia
  • Berenguer Betrián, Raúl|||/items/660b8462-63ec-4910-98e0-ac425e6bd7a6
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Different Pt- and Ru-doped Ti/SnO2–Sb electrodes were synthesized by thermal decomposition. The effect of the gradual substitution of Sb by Ru in the nominal composition on the physicochemical and electrochemical properties were evaluated. The electrochemical stability of the electrodes was estimated from accelerated tests at 0.5 A cm–2 in 1 M NaOH. Both as-synthesized and deactivated electrodes were thoroughly characterized by scanning electron microscopy (SEM), energy-dispersive X-ray microanalysis (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction analysis (XRD). The incorporation of a small amount (about 3 at. %) of both Pt and Ru into the SnO2–Sb electrodes produced a 400-times increase in their service life in alkaline medium, with no remarkable change in the electrocatalysis of the oxygen evolution reaction (OER). It is concluded that the deactivation of the electrodes is promoted by alkaline dissolution of metal species and coating detachment at high potentials. The introduction of Pt has a coating compacting effect, and Ru(IV), at low amounts until 9.75 at. %, replaces the Sn(IV) cations in the rutile-like SnO2 structure to form a solid solution that strongly increases the stability of the electrodes. The observed Ru segregation and decreased stability for larger Ru contents (x > 9.75 at. %), together with the selective dissolution of Ru after deactivation, suggest that the formation of a homogeneous (RuδSn1−δ)O2 single-phase is crucial for the stabilization of these electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The chemical and electrochemical oxidative polymerization of 2-amino-4-tert-butylphenol

  • Abidi, Mohamed
  • López-Bernabeu, Sara
  • Huerta Arráez, Francisco
  • Montilla, Francisco
  • Besbes-Hentati, Salma
  • Morallon, Emilia
  • Montilla, Francisco|||/items/b1740d15-1da3-4527-98a4-f6800cea0928
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Poly(2-amino-4-tert-butylphenol), poly(2A-4TBP), was synthesized from monomer aqueous solution using either electrochemical or chemical oxidation procedures. Several spectroscopic characterization techniques were employed to gain information on the chemical structure and redox behavior of the obtained materials. It was found that the chemical polymerization product could be described as an oligomer mixture containing up to 16 monomer units. In parallel to other polymers derived from o-aminophenol, phenoxazine rings constitute also the basic structure of poly(2A-4TBP). In addition, the occurrence of N-N couplings, which are favored by the presence of the voluminous tert-butyl substituent, seems also relevant. No significant structural differences were found between the chemically or electrochemically synthesized materials.