Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioactive and bioadhesive catechol conjugated polymers for tissue regeneration

  • Puertas-Bartolomé, María
  • Vázquez-Lasa, Blanca
  • San Román, Julio
The effective treatment of chronic wounds constitutes one of the most common worldwide healthcare problem due to the presence of high levels of proteases, free radicals and exudates in the wound, which constantly activate the inflammatory system, avoiding tissue regeneration. In this study, we describe a multifunctional bioactive and resorbable membrane with in-built antioxidant agent catechol for the continuous quenching of free radicals as well as to control inflammatory response, helping to promote the wound-healing process. This natural polyphenol (catechol) is the key molecule responsible for the mechanism of adhesion of mussels providing also the functionalized polymer with bioadhesion in the moist environment of the human body. To reach that goal, synthesized statistical copolymers of N-vinylcaprolactam (V) and 2-hydroxyethyl methacrylate (H) have been conjugated with catechol bearing hydrocaffeic acid (HCA) molecules with high yields. The system has demonstrated good biocompatibility, a sustained antioxidant response, an anti-inflammatory effect, an ultraviolet (UV) screen, and bioadhesion to porcine skin, all of these been key features in the wound-healing process. Therefore, these novel mussel-inspired materials have an enormous potential for application and can act very positively, favoring and promoting the healing effect in chronic wounds., This research was funded by CIBER-BBN, Spain and the Spanish Ministry of Economy and Competitivity (project MAT2014-51918-C2-1-R and María Puertas-Bartolomé’s scholarship, and project MAT2017-84277-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

α-Tocopheryl Succinate-Based Polymeric Nanoparticles for the Treatment of Head and Neck Squamous Cell Carcinoma

  • Sánchez-Rodríguez, Carolina
  • Palao-Suay, Raquel
  • Rodrigáñez, Laura
  • Aguilar, María Rosa
  • Martín-Saldaña, Sergio
  • San Román, Julio
  • Sanz-Fernández, Ricardo
The aim of this work is to study, in an in vitro head and neck squamous cell carcinomas model the anti-angiogenic and anti-migratory properties of self-assembled polymeric nanoparticles (NPs) with demonstrated selective anticancer activity. The NPs are based on α-tocopheryl succinate (α-TOS) encapsulated in the hydrophobic core of the NPs. We analyzed the effect of the newly synthetized α-TOS-loaded NPs in proliferating endothelial cells and hypopharynx carcinoma squamous cells and measured markers of angiogenesis, apoptosis and reactive oxygen species (ROS). α-TOS-loaded NPs suppressed angiogenesis by inducing accumulation of ROS and inducing apoptosis of proliferating endothelial cells. These NPs also decrease the number and quality of capillary-like tubes in an in vitro three-dimensional (3D) experiment, decrease the production of the pro-angiogenic vascular endothelial growth factor and down-regulate the expression of its receptor. The anti-migratory efficacy of α-TOS is corroborated in hypopharynx carcinoma cells by decreasing the secretion of matrix metalloproteases 2 and 9 (MMP-2 and MMP-9) and inhibiting cell migration. These results confirm that α-TOS-based NPs not only present anticancer properties, but also antiangiogenic properties, therefore making them promising candidates for multi-active combinatorial anticancer therapy., R.P.-S., M.R.A. and J.S.R. would like to thank financial support from the Spanish Ministry of Economy and Competitiveness (MAT2017-84277-R), and M.R.A., C.S.R., and R.S.-F. from the Universidad Europea de Madrid (2017/UEM21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoparticles of 4,7-dichloro-2-quinolinemethylacrylate-based copolymers and their potential cytotoxic activity on human breast carcinoma cells

  • Valle, Hernán
  • Palao-Suay, Raquel
  • Aguilar, María Rosa
  • San Román, Julio
  • Becerra, J.
  • Rivas, B.
  • Mangalaraja, R.V.
In this article, an improved synthesis strategy of the potent anticancer compound 4,7-dichloro-2-quinolinemethanol (QM) and its acrylate ester 4,7-dichloro-2-quinolinemethylacrylate (AQM) are described. AQM is copolymerized using free-radical polymerization with N-vinyl-2-pyrrolidone (VP) and the copolymers obtained from different molar ratios of monomers are subjected to nanoprecipitation to produce suspensions of nanoparticles (NPs) in phosphate buffered saline (PBS). The smallest and stable NPs are prepared with the AQM-VP copolymers 45:55 and 40:60 (118.9 and 128.7 nm in diameter, respectively) at 1 mg mL , and along with AQM and QM, are evaluated for their cytotoxic activity on MDA-MB-453 breast carcinoma cells using MTT bioassay. AQM and QM are highly cytotoxic (IC : 19 and 41 μM, respectively); however, the NPs are not cytotoxic in the range of the assayed concentrations. These results contribute to the search for new polymeric NPs with potential application as QM delivery systems for the treatment of cancer or other diseases treatable with QM. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47545., H. Valle and R.V. Mangalaraja acknowledge funding support from the Comisión Nacional de Ciencia y Tecnología (CONICYT), Chile, through the projects CONICYT/FONDECYT postdoctoral N3160296 and CONICYT PIA/APOYO CCTE AFB170007, respectively. R. Palao-Suay, M.R. Aguilar and J.S. Román acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the project MAT2017-84277-R. Authors also thank Dr. Mar Fernández and Rosa Ana Ramírez for their help in cell culture., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel bioactive and antibacterial acrylic bone cement nanocomposites modified with graphene oxide and chitosan

  • Valencia Zapata, Mayra Eliana
  • Mina Hernandez, José Herminsul
  • Grande Tovar, Carlos David
  • Valencia Llano, Carlos Humberto
  • Diaz Escobar, José Alfredo
  • Vázquez-Lasa, Blanca
  • San Román, Julio
  • Rojo, Luis
© 2019 by the authors., Acrylic bone cements (ABCs) have played a key role in orthopedic surgery mainly in arthroplasties, but their use is increasingly extending to other applications, such as remodeling of cancerous bones, cranioplasties, and vertebroplasties. However, these materials present some limitations related to their inert behavior and the risk of infection after implantation, which leads to a lack of attachment and makes necessary new surgical interventions. In this research, the physicochemical, thermal, mechanical, and biological properties of ABCs modified with chitosan (CS) and graphene oxide (GO) were studied. Fourier transform infrared (FTIR) spectroscopy, proton nuclear magnetic resonance (<sup>1</sup>H-NMR) scanning electron microscopy (SEM), Raman mapping, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), compression resistance, mechanical dynamic analysis (DMA), hydrolytic degradation, cell viability, alkaline phosphatase (ALP) activity with human osteoblasts (HOb), and antibacterial activity against Gram-negative bacteria <i>Escherichia coli</i> were used to characterize the ABCs. The results revealed good dispersion of GO nanosheets in the ABCs. GO provided an increase in antibacterial activity, roughness, and flexural behavior, while CS generated porosity, increased the rate of degradation, and decreased compression properties. All ABCs were not cytotoxic and support good cell viability of HOb. The novel formulation of ABCs containing GO and CS simultaneously, increased the thermal stability, flexural modulus, antibacterial behavior, and osteogenic activity, which gives it a high potential for its uses in orthopedic applications., Acrylic bone cements (ABCs) have played a key role in orthopedic surgery mainly in arthroplasties, but their use is increasingly extending to other applications, such as remodeling of cancerous bones, cranioplasties, and vertebroplasties. However, these materials present some limitations related to their inert behavior and the risk of infection after implantation, which leads to a lack of attachment and makes necessary new surgical interventions. In this research, the physicochemical, thermal, mechanical, and biological properties of ABCs modified with chitosan (CS) and graphene oxide (GO) were studied. Fourier transform infrared (FTIR) spectroscopy, proton nuclear magnetic resonance (1H-NMR) scanning electron microscopy (SEM), Raman mapping, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), compression resistance, mechanical dynamic analysis (DMA), hydrolytic degradation, cell viability, alkaline phosphatase (ALP) activity with human osteoblasts (HOb), and antibacterial activity against Gram-negative bacteria Escherichia coli were used to characterize the ABCs. The results revealed good dispersion of GO nanosheets in the ABCs. GO provided an increase in antibacterial activity, roughness, and flexural behavior, while CS generated porosity, increased the rate of degradation, and decreased compression properties. All ABCs were not cytotoxic and support good cell viability of HOb. The novel formulation of ABCs containing GO and CS simultaneously, increased the thermal stability, flexural modulus, antibacterial behavior, and osteogenic activity, which gives it a high potential for its uses in orthopedic applications., Sistema General de Regalías funded this research–FCTeI-Colombia (BPIN: 2013000100300), Spanish AEI/FEDER/UE MAT2015-73656-JIN and MAT2017-84277-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polylactic-co-glycolic acid microspheres added to fixative cements and its role on bone infected architecture

  • Ibarra, Blanca
  • García-García, J.
  • Azuara, G.
  • Vázquez-Lasa, Blanca
  • Ortega, Miguel Ángel
  • Asúnsolo, Ángel
  • San Román, Julio
  • Buján, J.
  • García-Honduvilla, N.
  • Torre, B. de la
Joint prostheses are an essential element to improve quality of life. However, prostheses may fail due to several factors, including the most frequent cause, Staphylococcus aureus infection. The identification of new fixing bone cements with less reactivity on bone tissue and an adequate response to infection remains a primary challenge. The aim of this study is to evaluate the response of bone tissue in rabbits after introduction of a hydroxyapatite-coated titanium rod with a commercial fixative cement (Palacos®) compared to a modified experimental cement (EC) containing polylactic-co-glycolic acid (PLGA) microspheres in the presence or absence of contaminating germs. This study used 20 New Zealand rabbits which were divided into four groups (n = 5) depending on the presence or absence of S. aureus and the use of commercial (Palacos®) or EC. A histological method, based on bone architecture damage, was proposed to evaluate from 1 to 9 the histological results and the response of the infected tissue. The macrophage response was also evaluated using monoclonal antibody RAM-11. The study showed better bone conservation with the use of EC with PLGA microspheres against the Palacos® commercial cement, including the noncontaminated and contaminated groups. © 2019 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: 00B: 000–000, 2019., SECOT (Spanish Society of Orthopedic Surgery and Traumatology); contract grant number: 2016/0055 MINECO (SpanishMinistry of Economy and Competitiveness); contract grant numbers:MAT2014-51918-C2-1-R,MAT-2017-84277-R MITIC-CM(Community of Madrid); contract grant number: B2017/BMD-3804, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphiphilic acrylic nanoparticles containing the poloxamer star bayfit® 10WF15 as ophthalmic drug carriers

  • Gómez-Ballesteros, Miguel
  • Andrés-Guerrero, Vanessa
  • Parra, Francisco
  • Marinich, Jorge
  • Heras, Beatriz de las
  • Molina-Martínez, Irene Teresa
  • Vázquez-Lasa, Blanca
  • San Román, Julio
  • Herrero Vanrell, María del Rocio
© The Author(s)., Topical application of drops containing ocular drugs is the preferred non-invasive route to treat diseases that affect the anterior segment of the eye. However, the formulation of eye drops is a major challenge for pharmacists since the access of drugs to ocular tissues is restricted by several barriers. Acetazolamide (ACZ) is a carbonic anhydrase inhibitor used orally for the treatment of ocular hypertension in glaucoma. However, large ACZ doses are needed which results in systemic side effects. Recently, we synthesized copolymers based on 2-hydroxyethyl methacrylate (HEMA) and a functionalized three-arm poloxamer star (Bayfit-MA). The new material (HEMA/Bayfit-MA) was engineered to be transformed into nanoparticles without the use of surfactants, which represents a significant step forward in developing new ophthalmic drug delivery platforms. Acetazolamide-loaded nanocarriers (ACZ-NPs) were prepared via dialysis (224 ± 19 nm, −17.2 ± 0.4 mV). The in vitro release rate of ACZ was constant over 24 h (cumulative delivery of ACZ: 83.3 ± 8.4%). Following standard specifications, ACZ-NPs were not cytotoxic in vitro in cornea, conjunctiva, and macrophages. In normotensive rabbits, ACZ-NPs generated a significant intraocular pressure reduction compared to a conventional solution of ACZ (16.4% versus 9.6%) with the same dose of the hypotensive drug (20 µg). In comparison to previously reported studies, this formulation reduced intraocular pressure with a lower dose of ACZ. In summary, HEMA:Bayfit-MA nanoparticles may be a promising system for ocular topical treatments, showing an enhanced ocular bioavailability of ACZ after a single instillation on the ocular surface., This research was funded by: Research Group UCM 920415, FEDER-CICYT FIS-PI17/00079 and PI17/00466 Sanitary Research Institute of the San Carlos Clinical Hospital (IdISSC), MINECO/AEI/FEDER, UE (MAT2017-83858-C2-1-R and MAT2017-84277-R) and the ISCII-FEDER RETICS (OFTARED) (RD16/0008)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioadhesive functional hydrogels: Controlled release of catechol species with antioxidant and antiinflammatory behavior

  • Puertas-Bartolomé, María
  • Benito-Garzón, Lorena
  • Fung, S.
  • Kohn, J.
  • Vázquez-Lasa, Blanca
  • San Román, Julio
Chronic wounds are particularly difficult to heal and constitute an important global health care problem. Some key factors that make chronic wounds challenging to heal are attributed to the incessant release of free radicals, which activate the inflammatory system and impair the repair of the wound. Intrinsic characteristics of hydrogels are beneficial for wound healing, but the effective control of free radical levels in the wound and subsequent inflammation is still a challenge. Catechol, the key molecule responsible for the mechanism of adhesion of mussels, has been proven to be an excellent radical scavenger and anti-inflammatory agent. Our approach in this work lies in the preparation of a hybrid system combining the beneficial properties of hydrogels and catechol for its application as a bioactive wound dressing to assist in the treatment of chronic wounds. The hydrogel backbone is obtained through a self-covalent crosslinking between chitosan (Ch) and oxidized hyaluronic acid (HAox) in the presence of a synthetic catechol terpolymer, which is subsequently coordinated to Fe to obtain an interpenetrated polymer network (IPN). The structural analysis, catechol release profiles, in vitro biological behavior and in vivo performance of the IPN are analyzed and compared with the semi-IPN (without Fe) and the Ch/HAox crosslinked hydrogels as controls. Catechol-containing hydrogels present high tissue adhesion strength under wet conditions, support growth, migration and proliferation of hBMSCs, protect cells against oxidative stress damage induce by ROS, and promote down-regulation of the pro-inflammatory cytokine IL-1β. Furthermore, in vivo experiments reveal their biocompatibility and stability, and histological studies indicate normal inflammatory responses and faster vascularization, highlighting the performance of the IPN system. The novel IPN design also allows for the in situ controlled and sustained delivery of catechol. Therefore, the developed IPN is a suitable ECM-mimic platform with high cell affinity and bioactive functionalities that, together with the controlled catechol release, will enhance the tissue regeneration process and has a great potential for its application as wound dressing., Authors thank CIBER-BBN (Spain); the Spanish Ministry of Economy and Competitiveness (project MAT2014-51918-C2-1-R, M. Puertas- Bartolomé scholarship and project MAT2017-84277-R); and International Summer Exchange for supporting this work. The authors thank Rosana Ramírez of ICTP-CSIC, Spain, for assistance in the biological culture assays., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glycerylphytate compounds with tunable ion affinity and osteogenic properties

  • Mora-Boza, Ana
  • López-Donaire, M. L.
  • Saldaña, Laura
  • Vilaboa, Nuria
  • Vázquez-Lasa, Blanca
  • San Román, Julio
Phytic acid (PA) is a natural-occurring antioxidant, which plays an important role in many biological processes. PA is recognized as a potent inhibitor of lipid peroxidation because of its high affinity to multivalent cations, and it can play a role in osteogenic processes. However, its powerful chelating capacity is controversial because it can lead to a severe reduction of mineral availability in the organism. For this reason, compounds with beneficial biological properties of PA, but a modular ion binding capacity, are of high interest. In this work, we report the synthesis and physicochemical characterization of two hydroxylic derivatives of PA, named glycerylphytates (GPhy), through a condensation reaction of PA with glycerol (G). Both derivatives present antioxidant properties, measured by ferrozine/FeCl method and chelating activity with calcium ions depending on the content of glyceryl groups incorporated. Besides, the hydroxylic modification not only modulates the ion binding affinity of derivatives but also improves their cytocompatibility in human bone marrow mesenchymal cells (MSCs). Furthermore, GPhy derivatives display osteogenic properties, confirmed by COL1A and ALPL expression depending on composition. These positive features convert GPhy compounds into potent alternatives for those skeletal diseases treatments where PA is tentatively applied., The authors thank financial support to Ministry of Science, Innovation and Universities (Spain) (MAT2017- 2017-84277-R), Instituto Salud Carlos III (ISCIII)-Fondo Europeo de Desarrollo Regional (FEDER), MINECOAES (PI18/00643 and PI15/01118). Ana Mora-Boza is supported by “La Caixa” foundation (Scholarship of, code LCF/BQ/ES16/11570018), Laura Saldaña is supported by a Miguel Servet contract from ISCIII-MINECO-AESFEDER- FSE. Nuria Vilaboa is supported by Program I2 from Comunidad Autónoma de Madrid. The authors are indebted to Rosana Ramirez (ICTP-CSIC) and Fatima Bensiamar (IdiPAZ and CIBER-BBN) for excellent technical assistance with cell culture experiments and gene expression analysis, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anti-inflammatory Surface Coatings Based on Polyelectrolyte Multilayers of Heparin and Polycationic Nanoparticles of Naproxen-Bearing Polymeric Drugs

  • Al-Khoury, H.
  • Espinosa-Cano, Eva
  • Aguilar, María Rosa
  • San Román, Julio
  • Syrowatka, F.
  • Schmidt, G.
  • Groth, T.
Immune response to biomaterials can produce chronic inflammation and fibrosis leading to implant failure, which is related to the surface properties of the biomaterials. This work describes the preparation and characterization of polyelectrolyte multilayer (PEM) coatings that combine the anti-inflammatory activity of heparin as polyanion with the potential release of Naproxen, a nonsteroidal anti-inflammatory drug from polymeric nanoparticles (NP) with cationic surface charge. The polyelectrolyte multilayers were characterized by physical methods to estimate multilayer growth, thickness, zeta potential, and topography. It was found that multilayers with NP had negative zeta potentials and expressed a viscoelastic behavior, while studies of topography showed that nanoparticles formed continuous surface coatings. THP-1-derived macrophages were used to study short-Term anti-inflammatory activity (time scale 48 h), showing that PEM that contained heparin reduced cell adhesion and IL1-β secretion, when compared to those with polystyrenesulfonate, used as alternative polyanion in multilayer formation. On the other hand, the presence of NP in PEM was related to a reduced foreign body giant cell formation after 15 days, when compared to PEM that contained chitosan as alternative polycation, which suggests a long-Term anti-inflammatory effect of Naproxen-containing nanoparticles. It was also shown that macrophages were able to take up NP from multilayers, which indicates a release of Naproxen by digestion of NP in the lysosomal compartment. These findings indicate that surface coatings composed of heparin and Naproxen-based NP on implants such as biosensors have the potential to attenuate foreign body reaction after implantation, which may improve the long-Term functionality of implants., This work was partly supported by the German Academic Exchange service (DAAD) through a PhD grant to Hala Alkhoury. Further financial support was provided by High Performance Center Chemical and Biosystems Technology Halle/Leipzig supported by the European Regional Development Fund (ERDF) and the Federal State Saxony-Anhalt. The authors would also like to thank CIBER-BBN, the Spanish Ministry of Science, Innovation and Universities (MAT2017- 84277-R), and the training program for Academic Staff (FPU15/06109) of the Spanish Ministry of Education Culture and Sport for the funding to this project. The kind support by Mrs. Marlis Porobin from Department Biomedical Materials, Muhamad Tariq from Institute of Physics at Martin Luther University Halle-Wittenberg, and Rafael Nuñez from the Center for Biological Research (CIB-CSIC), in zeta potential, AFM and cryoTEM experiments, is greatly appreciated., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glycerylphytate as an ionic crosslinker for 3D printing of multi-layered scaffolds with improved shape fidelity and biological features

  • Mora-Boza, Ana
  • Włodarczyk-Biegun, Małgorzata K.
  • Campo, Aránzazu del
  • Vázquez-Lasa, Blanca
  • San Román, Julio
The fabrication of intricate and long-term stable 3D polymeric scaffolds by a 3D printing technique is still a challenge. In the biomedical field, hydrogel materials are very frequently used because of their excellent biocompatibility and biodegradability, however the improvement of their processability and mechanical properties is still required. This paper reports the fabrication of dual crosslinked 3D scaffolds using a low concentrated (<10 wt%) ink of gelatin methacryloyl (GelMA)/chitosan and a novel crosslinking agent, glycerylphytate (G1Phy) to overcome the current limitations in the 3D printing field using hydrogels. The applied methodology consisted of a first ultraviolet light (UV) photopolymerization followed by a postprinting ionic crosslinking treatment with G1Phy. This crosslinker provides a robust framework and avoids the necessity of neutralization with strong bases. The blend ink showed shear-thinning behavior and excellent printability in the form of a straight and homogeneous filament. UV curing was undertaken simultaneously to 3D deposition, which enhanced precision and shape fidelity (resolution ≈150 μm), and prevented the collapse of the subsequent printed layers (up to 28 layers). In the second step, the novel G1Phy ionic crosslinker agent provided swelling and long term stability properties to the 3D scaffolds. The multi-layered printed scaffolds were mechanically stable under physiological conditions for at least one month. Preliminary in vitro assays using L929 fibroblasts showed very promising results in terms of adhesion, spreading, and proliferation in comparison to other phosphate-based traditional crosslinkers (i.e. TPP). We envision that the proposed combination of the blend ink and 3D printing approach can have widespread applications in the regeneration of soft tissues., Authors thank financial support from Ministry of Science, Innovation and Universities (Spain) (MAT2017-2017-84277-R), “La Caixa” Foundation (ID 100010434, scholarship of Ana Mora-Boza, code LCF/BQ/ES16/11570018) and DAAD Research Grants-Short-term grants 2017. Support of the publication fee by the CSIC Open Access Publication Support Initiativethrough its Unit of Information Resources for Research (URICI) is also acknowledged. The authors are indebted to Dr Marcus Koch (Leibniz-INM) for excellent technical assistance with SEM and light microscopy experiments, and to Dr Claudia Fink-Straube (Leibniz-INM) for ICP-OES experiment performance, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoparticles of 4,7-dichloro-2-quinolinemethylacrylate-based copolymers and their cytotoxic effect on Human breast carcinoma cells

  • Valle, Hernán
  • Palao-Suay, Raquel
  • Aguilar, María Rosa
  • San Román, Julio
  • Becerra, José
  • Rivas, Bernabé
  • Viswanathan Mangalaraja, Ramalinga
In this article, an improved synthesis strategy of the potent anticancer compound 4,7-dichloro-2-quinolinemethanol(QM) and its acrylate ester 4,7-dichloro-2-quinolinemethylacrylate (AQM) are described. AQM is copolymerized using free-radicalpolymerization with N-vinyl-2-pyrrolidone (VP) and the copolymers obtained from different molar ratios of monomers are subjected tonanoprecipitation to produce suspensions of nanoparticles (NPs) in phosphate buffered saline (PBS). The smallest and stable NPs areprepared with the AQM-VP copolymers 45:55 and 40:60 (118.9 and 128.7 nm in diameter, respectively) at 1 mg mL¿1, and along withAQM and QM, are evaluated for their cytotoxic activity on MDA-MB-453 breast carcinoma cells using MTT bioassay. AQM and QMare highly cytotoxic (IC50: 19 and 41 ¿ M, respectively); however, the NPs are not cytotoxic in the range of the assayed concentrations.These results contribute to the search for new polymeric NPs with potential application as QM delivery systems for the treatment ofcancer or other diseases treatable with QM., H. Valle and R.V. Mangalaraja acknowledge funding support from the Comisión Nacional de Ciencia y Tecnología (CONICYT), Chile, through the projects CONICYT/FONDECYT postdoctoral N3160296 and CONICYT PIA/APOYO CCTE AFB170007, respectively. R. Palao-Suay, M.R. Aguilar and J.S. Román acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the project MAT2017-84277-R. Authors also thank Dr. Mar Fernández and Rosa Ana Ramírez for their help in cell culture.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymeric Nanoparticles that Combine Dexamethasone and Naproxen for the Synergistic Inhibition of Il12b Transcription in Macrophages

  • Espinosa-Cano, Eva
  • Aguilar, María Rosa
  • Portilla, Yadileiny
  • Barber, Domingo F.
  • San Román, Julio
Recent studies have demonstrated in vivo synergistic immunosuppressive and anti-inflammatory capacity of dexamethasone (Dx) and naproxen (NAP) in collagen-induced arthritis (CIA) rats. However, the molecular basis of this synergistic effect is barely understood. The low solubility of these drugs and their adverse effects hamper their efficacy on the treatment of inflammatory processes making nanoparticulated systems promising candidates to overcome these drawbacks. The aim of this work is the preparation of polymeric nanoparticles (NPs) that combine NAP and Dx in different concentrations, and the evaluation of the expression of key genes related to autoimmune diseases like CIA. To do so, self-assembled polymeric NPs that incorporate covalently-linked NAP and physically entrapped Dx are designed to have hydrodynamic properties that, according to bibliography, may improve retention and colocalization of both drugs at inflammation sites. The rapid uptake of NPs by macrophages is demonstrated using coumarine-6-loaded NPs. Dx is efficiently encapsulated and in vitro biological studies demonstrate that the Dx-loaded NAP-bearing NPs are noncytotoxic and reduce lipopolysaccharide- induced NO released levels at any of the tested concentrations. Moreover, at the molecular level, a significant synergistic reduction of Il12b transcript gene expression when combining Dx and NAP is demonstrated., Authors would like to thank the Spanish Ministry of Science, Innovation and Universities (MAT2017-84277-R and SAF2017-82223-R) and CIBER-BBN for the financial support of this project. E.E.-C. and Y.P. would like to thank the training program for Academic Staff (FPU15/06109 and FPU15/06170, respectively) of the Spanish Ministry of Education Culture and Sport. The kind support by Alvaro González- Gómez, Rosana Ramírez, and David Gómez, in the synthesis, cell culture and SEM experiments is greatly appreciated, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anti-staphylococcal hydrogels based on bacterial cellulose and the antimicrobial biopolyester poly(3-hydroxy-acetylthioalkanoate-co-3-hydroxyalkanoate)

  • Rivero-Buceta, Virginia
  • Aguilar, María Rosa
  • Hernández-Arriaga, A.M.
  • Blanco Parte, Francisco German
  • Rojas, Antonia
  • Tortajada, Marta
  • Ramírez-Jiménez, Rosa Ana
  • Vázquez-Lasa, Blanca
  • Prieto, María Auxiliadora
11 p.-7 fig.-4 tab., Polymeric hydrogels from bacterial cellulose (BC) have been widely used for the development of wound dressings due to its water holding capacity, its high tensile strength and flexibility, its permeability to gases and liquids, but lacks antibacterial activity. In this work, we have developed novel antimicrobial hydrogels composed of BC and the antimicrobial poly(3-hydroxy-acetylthioalkanoate-co-3-hydroxyalkanoate) (PHACOS). Hydrogels based on different PHACOS contents (20 and 50 wt%) were generated and analysed through different techniques (IR, DSC, TGA, rheology, SEM and EDX) and their bactericidal activity was studied against Staphylococcus aureus. PHACOS20 (BC 80%-PHACOS 20%) hydrogel shows mechanical and thermal properties in the range of human skin and anti-staphylococcal activity (kills 1.8 logs) demonstrating a huge potential for wound healing applications. Furthermore, the cytotoxicity assay using fibroblast cells showed that it keeps cell viability over 85% in all the cases after seven days., Authors thank financial support to thank the Spanish Ministry of Science,Innovation and Universities [MAT2017-84277-R and Bio2017-8344-8-R], the European Union’s Horizon 2020 Research and Innovation Programme [grant agreement no 870294 (Mix-Up)] and the Community of Madrid [P2018/NMT4389] for the financial support of this project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anti-Inflammatory Polymeric Nanoparticles Based on Ketoprofen and Dexamethasone

  • Espinosa-Cano, Eva
  • Aguilar, María Rosa
  • Portilla, Yadileiny
  • Barber, Domingo F.
  • San Román, Julio
© 2020 by the authors., Polymeric nanoparticles that combine dexamethasone and naproxen reduce inflammation and synergistically inhibit Interleukin-12b (Il12b) transcription in macrophages. This effect can be the result of a cyclooxygenase-dependent or a cyclooxygenase-independent mechanism. The aim of this work is to obtain potent anti-inflammatory polymeric nanoparticles by the combination of dexamethasone and ketoprofen, one of the most efficient cyclooxygenase-inhibitors among non-steroidal anti-inflammatory drugs, with appropriate hydrodynamic properties to facilitate accumulation and co-release of drugs in inflamed tissue. Nanoparticles are spherical with hydrodynamic diameter (117 ± 1 nm), polydispersity (0.139 ± 0.004), and surface charge (+30 ± 1 mV), which confer them with high stability and facilitate both macrophage uptake and internalization pathways to favor their retention at the inflamed areas and lysosomal degradation and drug release, respectively. In vitro biological studies concluded that the dexamethasone-loaded ketoprofen-bearing system is non-cytotoxic and efficiently reduces lipopolysaccharide-induced nitric oxide release. The RT-qPCR analysis shows that the ketoprofen nanoparticles were able to reduce to almost basal levels the expression of tested pro-inflammatory markers and increase the gene expression of anti-inflammatory cytokines under inflammatory conditions. However, the synergistic inhibition of Il12b observed in nanoparticles that combine dexamethasone and naproxen was not observed in nanoparticles that combine dexamethasone and ketoprofen, suggesting that the synergistic trans-repression of Il12b observed in the first case was not mediated by cyclooxygenase-dependent pathways., This research was funded by the Spanish Ministry of Science, Innovation and Universities, grant number MAT2017-84277-R and SAF2017-82223-R and by the training program for Academic Staff, grant numbers FPU15/06109 and FPU15/06170, of the Spanish Ministry of Education Culture and Sport., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of biocomposite polymeric systems loaded with antibacterial nanoparticles for the coating of polypropylene biomaterials

  • Fernández-Gutiérrez, Mar
  • Pérez-Köhler, Bárbara
  • Benito-Martínez, Selma
  • García-Moreno, Francisca
  • Pascual, Gemma
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Vázquez-Lasa, Blanca
  • Bellón, Juan Manuel
The development of a biocomposite polymeric system for the antibacterial coating of polypropylene mesh materials for hernia repair is reported. Coatings were constituted by a film of chitosan containing randomly dispersed poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles loaded with chlorhexidine or rifampicin. The chlorhexidine-loaded system exhibited a burst release during the first day reaching the release of the loaded drug in three or four days, whereas rifampicin was gradually released for at least 11 days. Both antibacterial coated meshes were highly active against Staphylococcus aureus and Staphylococcus epidermidis (106 CFU/mL), displaying zones of inhibition that lasted for 7 days (chlorhexidine) or 14 days (rifampicin). Apparently, both systems inhibited bacterial growth in the surrounding environment, as well as avoided bacterial adhesion to the mesh surface. These polymeric coatings loaded with biodegradable nanoparticles containing antimicrobials effectively precluded bacterial colonization of the biomaterial. Both biocomposites showed adequate performance and thus could have potential application in the design of antimicrobial coatings for the prophylactic coating of polypropylene materials for hernia repair., The study was supported by Grants SAF2017-89481-P and MAT2017-84277-R from the Spanish Ministry of Science, Innovation and Universities. Financial support from the CIBER-BBN is acknowledged. The study was supported by Grants SAF2017-89481-P and MAT2017-84277-R from the Spanish Ministry of Science, Innovation and Universities. Financial support from the CIBER-BBN is acknowledged (CIBER-BBN Internal Collaborations 2018-2021: “Functionalization of polymer coatings using antimicrobial agents for prevention of mesh infection following hernia surgery” and “Polymeric nanoparticles for the treatment of bacterial diseases”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Printing of a Reactive Hydrogel Bio-Ink Using a Static Mixing Tool

  • Puertas-Bartolomé, María
  • Włodarczyk-Biegun, Małgorzata K.
  • Campo, Aránzazu del
  • Vázquez-Lasa, Blanca
  • San Román, Julio
© 2020 by the authors., Hydrogel-based bio-inks have recently attracted more attention for 3D printing applications in tissue engineering due to their remarkable intrinsic properties, such as a cell supporting environment. However, their usually weak mechanical properties lead to poor printability and low stability of the obtained structures. To obtain good shape fidelity, current approaches based on extrusion printing use high viscosity solutions, which can compromise cell viability. This paper presents a novel bio-printing methodology based on a dual-syringe system with a static mixing tool that allows in situ crosslinking of a two-component hydrogel-based ink in the presence of living cells. The reactive hydrogel system consists of carboxymethyl chitosan (CMCh) and partially oxidized hyaluronic acid (HAox) that undergo fast self-covalent crosslinking via Schiff base formation. This new approach allows us to use low viscosity solutions since in situ gelation provides the appropriate structural integrity to maintain the printed shape. The proposed bio-ink formulation was optimized to match crosslinking kinetics with the printing process and multi-layered 3D bio-printed scaffolds were successfully obtained. Printed scaffolds showed moderate swelling, good biocompatibility with embedded cells, and were mechanically stable after 14 days of the cell culture. We envision that this straightforward, powerful, and generalizable printing approach can be used for a wide range of materials, growth factors, or cell types, to be employed for soft tissue regeneration., This research was funded by CIBER-BBN, Spain and the Spanish Ministry of Economy and Competitivity (project MAT2017-84277-R and M. Puertas-Bartolomé scholarship BES-2015-075161). B. Vázquez-Lasa and J. San Román are members of the SusPlast platform (Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy) from the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Osseointegration of antimicrobial acrylic bone cements modified with graphene oxide and chitosan

  • Zapata, Mayra Eliana Valencia
  • Mina Hernandez, José Herminsul
  • Grande Tovar, Carlos David
  • Valencia Llano, Carlos Humberto
  • Vázquez-Lasa, Blanca
  • San Román, Julio
  • Rojo, Luis
Acrylic bone cement (ABC) is one of the most used materials in orthopedic surgery, mainly for the fixation of orthopedic implants to the bone. However, ABCs usually present lack of biological activity and osseointegration capacity that leads to loosening of the prosthesis. This work reports the effect of introducing graphene oxide (GO) and chitosan (CS), separately or together, in the ABC formulation on setting performance, mechanical behavior, and biological properties. Introduction of both CS and GO to the ABC decreased the maximum temperature by 21% and increased the antibacterial activity against Escherichia coli by 87%, while introduction of only CS decreased bending strength by 32%. The results of cell viability and cell adhesion tests showed in vitro biocompatibility. The in vivo response was investigated using both subdermal and bone parietal implantations in Wistar rats. Modified ABCs showed absence of immune response, as confirmed by a normal inflammatory response in Wistar rat subdermal implantation. The results of the parietal bone implantation showed that the addition of CS and GO together allowed a near total healing bone–cement interface, as observed in the micrographic analysis. The overall results support the great potential of the modified ABCs for application in orthopedic surgery mainly in those cases where osseointegration is required., This research was funded by Sistema General de Regalías funded this research-FCTeI-Colombia (BPIN: 2013000100300), Spanish AEI/FEDER/UE MAT2015-73656-JIN and MAT2017-84277-R, and Health Institute Carlos III (CIBER-BBN). The authors acknowledge Rosa Ana Ramirez Jimenez of the Biomaterials Group of the Instituto de Ciencia y Tecnología de Polímeros, ICTP-CSIC, Spain for the support in the in vitro assays. The authors acknowledge to the Sistema General de Regalías-FCTeI-Colombia (BPIN: 2013000100300) for funding the research. Author Mayra Eliana Valencia Zapata acknowledges to MinCiencias for funding her doctoral studies. The authors Blanca Vázquez-Lasa and Luis Rojo are members of the SusPlast platform from the Spanish National Research Council (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitosan-stabilized Silver Nanoclusters with Luminescent, Photothermal and Antibacterial Properties

  • Nakal-Chidiac, Alberto
  • García Ballesteros, Olga
  • García-Fernández, Luis
  • Martín-Saavedra, Francisco M.
  • Sánchez-Casanova, Silvia
  • Escudero-Duch, Clara
  • San Román, Julio
  • Vilaboa, Nuria
  • Aguilar, María Rosa
The aim of this paper is to achieve in situ photochemical synthesis of silver nanoclusters (AgNCs) stabilized by the multiple-amine groups of chitosan (Ch@AgNCs) with luminescent and photothermal properties. Ch@AgNCs were obtained by applying a fast and simple methodology previously described by our group. Direct functionalization of AgNCs with chitosan template provided new nanohybrids directly in water solution, both in the presence or absence of oxygen. The formation of hybrid AgNCs could be monitored by the rapid increase of the absorption and emission maximum band with light irradiation time. New Ch@AgNCs not only present photoluminescent properties but also photothermal properties when irradiated with near infrared light (NIR), transducing efficiently NIR into heat and increasing the temperature of the medium up to 23 °C. The chitosan polymeric shell associated to AgNCs works as a protective support stabilizing the metal cores, facilitating the storage of nanohybrids and preserving luminescent, photothermal and bactericide properties., The authors are thankful for the financial support from Ministerio de Economía y Competitividad (MINECO) through the project MAT2017- 84277-R and MAT2014-57429-R and Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigaciónn (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the projects: PGC2018-095364-B-I00 and RTI2018-095159-B-10
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidics generation of chitosan microgels containing glycerylphytate crosslinker for in situ human mesenchymal stem cells encapsulation

  • Mora-Boza, Ana
  • Mancipe Castro, Lina M.
  • Schneider, Rebecca S.
  • Han, Woojin M.
  • García, Andrés J.
  • Vázquez-Lasa, Blanca
  • San Román, Julio
The authors thank the Spanish Ministry of Science and Innovation (project, MAT2017-84277-R) and U.S. National Institutes of Health (R01 AR062368) for financial support. B. Vázquez-Lasa and J. San Román are members of the SusPlast platform (Interdisciplinary Platform for Sustain-able Plastics towards a Circular Economy) from the Spanish National Research Council (CSIC). Ana Mora-Boza was supported by “La Caixa” Foundation (ID 100010434, scholarship code LCF/BQ/ES16/11570018) and CIBER-BBN (Health Institute Carlos III) Travel grant
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emerging Biofabrication Techniques: A Review on Natural Polymers for Biomedical Applications

  • Puertas-Bartolomé, María
  • Mora-Boza, Ana
  • García-Fernández, Luis
Natural polymers have been widely used for biomedical applications in recent decades. They offer the advantages of resembling the extracellular matrix of native tissues and retaining biochemical cues and properties necessary to enhance their biocompatibility, so they usually improve the cellular attachment and behavior and avoid immunological reactions. Moreover, they offer a rapid degradability through natural enzymatic or chemical processes. However, natural polymers present poor mechanical strength, which frequently makes the manipulation processes difficult. Recent advances in biofabrication, 3D printing, microfluidics, and cell-electrospinning allow the manufacturing of complex natural polymer matrixes with biophysical and structural properties similar to those of the extracellular matrix. In addition, these techniques offer the possibility of incorporating different cell lines into the fabrication process, a revolutionary strategy broadly explored in recent years to produce cell-laden scaffolds that can better mimic the properties of functional tissues. In this review, the use of 3D printing, microfluidics, and electrospinning approaches has been extensively investigated for the biofabrication of naturally derived polymer scaffolds with encapsulated cells intended for biomedical applications (e.g., cell therapies, bone and dental grafts, cardiovascular or musculoskeletal tissue regeneration, and wound healing)., This research was funded by the Ministry of Science, Innovation, and Universities (Spain) (MAT2017-84277-R); Apadrina la Ciencia-Ford Foundations (Fellowship of A.M.-B)); and Leibniz ScienceCampus Living Therapeutic Materials (Saarbrücken, Germany)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antitumor Activity of Nanoparticles Loaded with PHT-427, a Novel AKT/PDK1 Inhibitor, for the Treatment of Head and Neck Squamous Cell Carcinoma

  • Yanes-Díaz, Joaquín
  • Palao-Suay, Raquel
  • Aguilar, María Rosa
  • Riestra-Ayora,Juan Ignacio
  • Ferruelo-Alonso, Antonio
  • Rojo, Luis
  • Vázquez-Lasa, Blanca
  • Sanz-Fernández, Ricardo
  • Sánchez-Rodríguez, Carolina
Currently, new treatments are required to supplement the current standard of care for head and neck squamous cell carcinoma (HNSCC). The phosphatidylinositol3-kinase (PI3K) signaling pathway is commonly altered and activated in HNSCC. PHT-427 is a dual PI3K-mammalian target of the AKT/PDK1 inhibitor; however, to the best of our knowledge, the effect of the PHT-427 inhibitor on HNSCC has not been investigated. This study aims to evaluate the antitumoral effect of PHT-427-loaded polymeric nanoparticles based on α-tocopheryl succinate (α-TOS). The in vitro activity of PHT-427 was tested in hypopharynx carcinoma squamous cells (FaDu) to measure the cell viability, PI3KCA/AKT/PDK1 gene expression, and PI3KCA/AKT/PDK1 levels. Apoptosis, epidermal growth factor receptor (EGFR), and reactive oxygen species (ROS) were also measured. The presence of PHT-427 significantly enhances its antiproliferative and proapoptotic activity by inactivating the PI3K/AKT/PDK1 pathway. Nanoparticles (NPs) effectively suppress AKT/PDK1 expression. Additionally, NPs loaded with PHT-427 produce high oxidative stress levels that induce apoptosis. In conclusion, these results are promising in the use of this nanoformulation as a PHT-427 delivery system for effective HNSCC treatment., This research was funded by the Spanish Ministry of Science, Innovation, and Universities and CIBER-BBN, grant number MAT2017-84277-R, and by the European University of Madrid, grant numbers 2017/UEM21 and 2019/UEM06, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitosan – Rosmarinic acid conjugates with antioxidant, anti-inflammatory and photoprotective properties

  • Huerta-Madroñal, Miguel
  • Caro-León, Javier
  • Espinosa-Cano, Eva
  • Aguilar, María Rosa
  • Vázquez-Lasa, Blanca
Rosmarinic acid is an attractive candidate for skin applications because of its antioxidant, anti-inflammatory, and photoprotective functions, however, its poor bioavailability hampers its therapeutic outcome. In this context, synthesis of polymer conjugates is an alternative to enlarge its applications. This work describes the synthesis of novel water-soluble chitosan – rosmarinic acid conjugates (CSRA) that have great potential for skin applications. Chitosan was functionalized with different contents of rosmarinic acid as confirmed by ATR-FTIR, H NMR and UV spectroscopies. CSRA conjugates presented three-fold radical scavenger capacity compared to the free phenolic compound. Films were prepared by solvent-casting procedure and the biological activity of the lixiviates was studied in vitro. Results revealed that lixiviates reduced activation of inflamed macrophages, improved antibacterial capacity against E. coli with respect to native chitosan and free rosmarinic acid, and also attenuated UVB-induced cellular damage and reactive oxygen species production in fibroblasts and keratinocytes., This work was supported by MICINN (Spain) (MAT2017-84277-R, and PRE2018-083873 M. Huerta's scholarship). F. J. Caro acknowledge financial support from CONACyT (Mexico) through the scholarship ‘Apoyo para estancias postdoctorales en el extranjero vinculadas a la consolidación de grupos de investigación y fortalecimiento del Posgrado nacional’. M.R. Aguilar and B. Vázquez-Lasa are members of the Sus- Plast platform from CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Injectable Tripeptide/Polymer Nanoparticles Supramolecular Hydrogel: A Candidate for the Treatment of Inflammatory Pathologies

  • Criado-González, Miryam
  • Espinosa-Cano, Eva
  • Rojo, Luis
  • Boulmedais, F.
  • Aguilar, María Rosa
  • Hernández, Rebeca
Supramolecular peptide-based hydrogels attract great attention in several fields, i.e., biomedicine, catalysis, energy, and materials chemistry, due to the noncovalent nature of the self-assembly and functional tunable properties defined by the amino acid sequence. In this work, we developed an injectable hybrid supramolecular hydrogel whose formation was triggered by electrostatic interactions between a phosphorylated tripeptide, Fmoc-FFpY (F: phenylalanine, pY: phosphorylated tyrosine), and cationic polymer nanoparticles made of vinylimidazole and ketoprofen (poly(HKT-co-VI) NPs). Hydrogel formation was assessed through inverted tube tests, and its fibrillary structure, around polymer NPs, was observed by transmission electron microscopy. Interestingly, peptide self-assembly yields the formation of nontwisted and twisted fibers, which could be attributed to β-sheets and α-helix structures, respectively, as characterized by circular dichroism and infrared spectroscopies. An increase of the elastic modulus of the Fmoc-FFpY/polymer NPs hybrid hydrogels was observed with peptide concentration as well as its injectability property, due to its shear thinning behavior and self-healing ability. After checking their stability under physiological conditions, the cytotoxicity properties of these hybrid hydrogels were evaluated in contact with human dermal fibroblasts (FBH) and murine macrophages (RAW 264.7). Finally, the Fmoc-FFpY/polymer NPs hybrid hydrogels exhibited a great nitric oxide reduction (∼67%) up to basal values of pro-inflammatory RAW 264.7 cells, thus confirming their excellent anti-inflammatory properties for the treatment of localized inflammatory pathologies., Financial support from Spanish Research Council (CSIC) and French Research Council (CNRS) for the project PICS (International Emerging Actions) 2018 HYDROPRINT isgratefully acknowledged. The authors also acknowledge funding from CIBER-BBN, Spanish Ministry of Science, Innovation and Universities (MAT2017-83014-C2-2-P and MAT2017-84277-R), and the training program for Academic Staff, grant number FPU15/06109, of the Spanish Ministry of Education Culture and Sport., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitosan-based inks: 3D printing and bioprinting strategies to improve shape fidelity, mechanical properties, and biocompatibility of 3D scaffolds

  • Mora-Boza, Ana
  • Włodarczyk-Biegun, Małgorzata K.
  • Campo, Aránzazu del
  • Vázquez-Lasa, Blanca
  • San Román, Julio
El campo de la impresión y la bioimpresión 3D ha alcanzado un gran desarrollo en los últimos años. La llegada de estas técnicas de biofabricación a la ingeniería tisular han supuesto una revolución debido a las estructuras biomiméticas tan complejas que permiten sintetizar. El uso del quitosano como componente de tintas basadas en polímeros naturales es muy atractivo debido a las propiedades beneficiosas que presenta (alta biocompatibilidad, biodegradabilidad, bajo coste). Sin embargo, su aplicación se ve limitada por su baja solubilidad en condiciones fisiológicas y sus pobres propiedades mecánicas. En este artículo, revisamos el estado del arte relacionado con las estrategias actuales de impresión 3D que hacen uso de tintas y biotintas basadas en quitosano para el desarrollo de soportes biomiméticos. También analizamos las estrategias de entrecruzamiento que se aplican actualmente para mejorar su printabilidad, resaltando además los derivados de quitosano disponibles que permiten encapsular células para bioimpresión 3D, incluyendo además nuestra contribución al campo. Prevemos que el uso de quitosano en la impresión 3D aumentará significativamente en los próximos años gracias a los esfuerzos que se están desarrollando en términos de mecanismos de gelificación y derivados de quitosano que permiten la encapsulación celular., El campo de la impresión y la bioimpresión 3D ha alcanzado un gran desarrollo en los últimos años. La llegada de estas técnicas de biofabricación a la ingeniería tisular han supuesto una revolución debido a las estructuras biomiméticas tan complejas que permiten sintetizar. El uso del quitosano como componente de tintas basadas en polímeros naturales es muy atractivo debido a las propiedades beneficiosas que presenta (alta biocompatibilidad, biodegradabilidad, bajo coste). Sin embargo, su aplicación se ve limitada por su baja solubilidad en condiciones fisiológicas y sus pobres propiedades mecánicas. En este artículo, revisamos el estado del arte relacionado con las estrategias actuales de impresión 3D que hacen uso de tintas y biotintas basadas en quitosano para el desarrollo de soportes biomiméticos. También analizamos las estrategias de entrecruzamiento que se aplican actualmente para mejorar su printabilidad, resaltando además los derivados de quitosano disponibles que permiten encapsular células para bioimpresión 3D, incluyendo además nuestra contribución al campo. Prevemos que el uso de quitosano en la impresión 3D aumentará significativamente en los próximos años gracias a los esfuerzos que se están desarrollando en términos de mecanismos de gelificación y derivados de quitosano que permiten la encapsulación celular., Authors thank financial support to Mi- nistry of Science, Innovation and Universi- ties (Spain) (MAT2017-84277-R), “La Caixa” Foundation (ID 100010434, scho- larship of Ana Mora-Boza, code LCF/BQ/ ES16/11570018) and DAAD Research Grants- Short-term grants 2017
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Development of biocomposite polymeric systems loaded with antibacterial nanoparticles for the coating of polypropylene biomaterials

  • Fernández Gutiérrez, Mar
  • Pérez Köhler, Bárbara|||0000-0002-5061-1526
  • Benito Martínez, Selma|||0000-0002-3118-0564
  • García-Moreno Nisa, Francisca|||0000-0001-5360-0577
  • Pascual González, María Gemma|||0000-0002-1623-4384
  • García Fernández, Luis
  • Aguilar, María Rosa
  • Vázquez Lasa, Blanca
  • Bellón Caneiro, Juan Manuel|||0000-0002-6071-5011
"Publicación presentada para sexenios", The development of a biocomposite polymeric system for the antibacterial coating of polypropylene mesh materials for hernia repair is reported. Coatings were constituted by a film of chitosan containing randomly dispersed poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles loaded with chlorhexidine or rifampicin. The chlorhexidine-loaded system exhibited a burst release during the first day reaching the release of the loaded drug in three or four days, whereas rifampicin was gradually released for at least 11 days. Both antibacterial coated meshes were highly active against Staphylococcus aureus and Staphylococcus epidermidis (106 CFU/mL), displaying zones of inhibition that lasted for 7 days (chlorhexidine) or 14 days (rifampicin). Apparently, both systems inhibited bacterial growth in the surrounding environment, as well as avoided bacterial adhesion to the mesh surface. These polymeric coatings loaded with biodegradable nanoparticles containing antimicrobials e_ectively precluded bacterial colonization of the biomaterial. Both biocomposites showed adequate performance and thus could have potential application in the design of antimicrobial coatings for the prophylactic coating of polypropylene materials for hernia repair., Agencia Estatal de Investigación