Pasar al contenido principal

ESTRATEGIAS DE HIBRIDACION POLIMERO-NANOPARTICULA PARA EL DESARROLLO DE PLATAFORMAS NANOESTRUCTURADAS Y MULTIFUNCIONALES EN TERAGNOSIS

MAT2014-57429-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-Hydrogel Based Polymeric Nanoreactors for Silver Nano-Antimicrobial Composites Generation

  • Soto-Quintero, Albanelly
  • Romo-Uribe, Ángel
  • Bermúdez-Morales, Víctor H.
  • Quijada-Garrido, Isabel
  • Guarrotxena, Nekane
This study underscores the development of Ag hydrogel nanocomposites, as smart substrates for antibacterial uses, via innovative in situ reactive and reduction pathways. To this end, two different synthetic strategies were used. Firstly thiol-acrylate (PSA) based hydrogels were attained via thiol-ene and radical polymerization of polyethylene glycol (PEG) and polycaprolactone (PCL). As a second approach, polyurethane (PU) based hydrogels were achieved by condensation polymerization from diisocyanates and PCL and PEG diols. In fact, these syntheses rendered active three-dimensional (3D) hydrogel matrices which were used as nanoreactors for in situ reduction of AgNO<sub>3</sub> to silver nanoparticles. A redox chemistry of stannous catalyst in PU hydrogel yielded spherical AgNPs formation, even at 4 °C in the absence of external reductant; and an appropriate thiol-functionalized polymeric network promoted spherical AgNPs well dispersed through PSA hydrogel network, after heating up the swollen hydrogel at 103 °C in the presence of citrate-reductant. Optical and swelling behaviors of both series of hydrogel nanocomposites were investigated as key factors involved in their antimicrobial efficacy over time. Lastly, in vitro antibacterial activity of Ag loaded hydrogels exposed to <i>Pseudomona aeruginosa</i> and <i>Escherichia coli</i> strains indicated a noticeable sustained inhibitory effect, especially for Ag–PU hydrogel nanocomposites with bacterial inhibition growth capabilities up to 120 h cultivation., thanks the Mexican Council for Science and Technology, CONACyT, for a graduate scholarship. Authors thank the financial support of the Spanish Ministerio de Economía y Competitividad through the Projects MAT 2011-25513 and MAT 2014-57429-R., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

QDs decorated with thiol-monomer ligands as new multicrosslinkers for the synthesis of smartluminescent nanogels and hydrogels.

  • Liras, Marta
  • Quijada-Garrido, Isabel
  • García Ballesteros, Olga
Herein, new smart thermo-responsive photoluminescent nano- and macrogel hybrids based on quantum dots (QDs) and poly(diethylene glycol methyl ether methacrylate) (pMEO2MA) are reported. The synthetic strategy comprises the functionalization of the homemade hydrophobic CdSe nanoparticles (NPs) with thiol-functionalized methacrylic monomers via ligand exchange reactions. Therefore, the organic¿inorganic hybrid QD NPs decorated with methacrylic groups are able to connect the inorganic core with the growing pMEO2MA chains during the radical polymerization reaction by acting as multicrosslinker nanoagents. Depending on whether the bottom-up polymerization approach is conducted in solution or in bulk, nanometric core¿shell QD@pMEO2MA NPs or hybrid pMEO2MA hydrogels crosslinked by QDNPs are achieved, respectively. Both nanogel and hydrogel hybrids experience a considerable and sudden increase in the fluorescence emission upon heating due to gel collapse at the volume phase transition temperature (VPTT), independent of pH. Moreover, at very basic pH (pH 12), the hydrogels also undergo a colour change from red to fully blue, which makes them promising as pH sensors. Both pH- and thermoresponse are reversible in both nano- and macro-gel materials., This work received financial support from the Ministerio de Economía y Competitividad (MINECO) from Spain through the Project MAT2014-57429-R. Also M. Liras thanks to MINECO and European Social Fund for a Ramón y Cajal contract (RyC-2015-18677)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication and Characterization of Polymer Optical Fibers Doped with Perylene-Derivatives for Fluorescent Lighting Applications

  • Parola, Itxaso
  • Arrospide, Eneko
  • Recart, Federico
  • Illarramendi, María Asunción
  • Durana, Gaizka
  • Guarrotxena, Nekane
  • García Ballesteros, Olga
  • Zubia, Joseba
Four different dye-doped polymer optical fibers (POFs) have been fabricated following a two-step fabrication process of preform extrusion and fiber drawing, using poly-(methyl methacrylate) (PMMA) as host material and dye derivatives from perylene and naphtalimide as active dopants. The side illumination technique (SIT) has been employed in order to determine some optical properties of the fabricated fibers, such as the side illumination coupling efficiency, optical loss coefficients, and their performance under solar simulator excitation. The aim of this work is to investigate the performance of the manufactured fibers for fluorescent lighting applications, specially targeting on fluorescent fiber based solar concentrators., This work has been funded in part by the Fondo Europeo de Desarrollo Regional (FEDER); by the Ministerio de Economía y Competitividad under project TEC2015-638263-C03-1-R; by the Gobierno Vasco/Eusko Jaurlaritza under projects IT933-16 and ELKARTEK (KK-2016/0030 and KK-2016/0059); and by Ministerio de Economía y Competitividad under project MAT2014-57429-R. The work carried out by Itxaso Parola has been funded by a research grant given by the Departamento de Educación, Política Lingüística y Cultura del Gobierno Vasco/Eusko Jaurlaritza for her PhD thesis, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient light harvesting within a C153@Zr-based MOF embedded in a polymeric film: Spectral and dynamical characterization

  • Gutiérrez, M.
  • López-González, Mar
  • Sánchez, Félix
  • Douhal, Abderrazzak
Light harvesting is a natural phenomenon that scientists try to mimic in artificial systems. Having this in mind, attention has been focused on using new smart-materials for photonics. Herein, we report on the photobehaviour of a Zr-NDC MOF (NDC = dimethyl 2,6-naphthalenedicarboxylate) and its composite material, Coumarin153@Zr-NDC, embedded within a polymeric membrane of poly[bisphenol A carbonate-co-4,4′-(3,3,5-trimethylcyclohexylidene)diphenol carbonate] (PC). For the mixed matrix membrane (MMM) Zr-NDC/PC, we observed interparticle excimer-like formation, taking place in times shorter than 15 ps and giving rise to a red-shifted broad emission band. The interparticle interactions are supported by the SEM images, as they reflect the contact between the MOF crystals. The C153@Zr-NDC/PC material presents an energy transfer (ET) process from the excited MOF to the trapped C153 molecules in 820 ps, with a 35 nm red-shifted emission band corresponding to C153 in PC. The fluorescence quantum yield, as a result of this ET from the MOF, is high enough (25%) to explore the possibility of using this new composite material in a LED device. To elucidate the observed photobehavior, we compared it with those of C153/PC and (2,6-NDC + C153)/PC films. These results shed light on the spectroscopic and dynamical properties of these new composite materials formed by a highly fluorescent molecule, and easily synthesized MOFs and polymeric matrices, opening the way for more research based on these mixed inorganic and organic compounds for possible applications in the fields of luminescence sensing and emitting devices., This work was supported by the MINECO and JCCM through projects: Consolider Ingenio 2010 (CSD2009-0050, MULTICAT), MAT2014-52085-C2-2-P, MAT2014-57429-R, MAT2014-57646-P and PEII-2014-003-P. M. Gutie´rrez thanks the MINECO for the FPI Fellowship, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of Au@polymer nanohybrids with transited core-shell morphology from concentric to eccentric Emoji-N or Janus nanoparticles

  • Guarrotxena, Nekane
  • García Ballesteros, Olga
  • Quijada-Garrido, Isabel
The combination of multifunctionality and synergestic effect displayed by hybrid nanoparticles (NPs) has been revealed as an effective stratagem in the development of advanced nanostructures with unique biotechnology and optoelectronic applications. Although important work has been devoted, the demand of facile, versatile and efficient synthetic approach remains still challenging. Herein, we report a feasible and innovative way for polymer-shell assembling onto gold nanoparticles in competitive conditions of hydrophobic/hydrophilic feature and interfacial energy of components to generate core-shell nanohybrids with singular morphologies. The fine control of reaction parameters allows a modulated transformation from concentric to eccentric nanostructure-geometries. In this regard, a rational selection of the components and solvent ratio guarantee the reproducibility and efficiency on hybrid-nanoassembly. Furthermore, the simplicity of the synthetic approach offers the possibility to obtain asymmetric Janus NPs and new morphologies (quizzical-aspheric polymer-shell, named Emoji-N-hybrids) with adjustable surface-coating, leading to new properties and applications that are unavailable to their symmetrical or single components., This work was supported by the Ministerio de Economía y Competitividad (MINECO), Project MAT2014-57429-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer optical fibers doped with organic materials as luminescent solar concentrator

  • Parola, I.
  • Illarramendi, M. A.
  • Zubia, J.
  • Arrospide, Eneko
  • Durana, Gaizka
  • Guarrotxena, Nekane
  • García Ballesteros, Olga
  • Evert, R.
  • Zaremba, D.
  • Johannes, H-H.
  • Recart, Federico
This paper provides an analysis of the emission properties of different polymer optical fibers doped with organic materials with the aim of investigate their performance as luminescent solar concentrators. We present a study of the light propagation along the fibers, together with the experimental measurements of two different efficiencies: side illumination coupling efficiency and fluorescent fiber solar concentrator efficiency. The results obtained for all the fibers are compared and discussed., This work has been funded in part by the Fondo Europeo de Desarrollo Regional (FEDER); by the Ministerio de Economía y Competitividad under project TEC2015-638263-C03-1-R; by the Gobierno Vasco/Eusko Jaurlaritza under projects IT933-16 and ELKARTEK (KK-2016/0030 and KK-2016/0059); by the University of the Basque Country UPV/EHU under program UFI11/16; and by Ministerio de Economía y Competitividad under project MAT2014-57429- R. The work carried out by I. Parola has been funded by a research grant given by the Departamento de Educación, Política Lingüística y Cultura del Gobierno Vasco/Eusko Jaurlaritza for her PhD thesis., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of Nanostructured Surfaces Based on Metal NP Precipitation Strategy and their Catalytic Application

  • Guarrotxena, Nekane
  • Garrido, Leoncio
  • Quijada-Garrido, Isabel
The fabrication of functional surfaces based on arrangements of metallic nanoparticles (MNPs) is challenging for biomedical, optoelectronic, and catalytic applications. Herein, the fabrication of 3D nanostructured microfibers is reported by the controlled cooperative precipitation of MNPs on electrospun polymer fiber mats, at the critical solution temperature of a thermoresponsive copolymer coating the MNPs surface. To obtain the metallic decorated surfaces, several factors must be taken into consideration, such as the previous functionalization of the metallic nanoparticle surface and the selection of a suitable polymer concentration, pH, and temperature. The results show that the plasmonic properties of the prepared surfaces depend on the solution temperature. Among potential applications, the high specific area of the resulting Au@polymer@fiber nanocomposites is ideal to be exploited for catalytic applications. Thus, the reduction of 4¿nitrophenol has been studied as a model., The authors gratefully acknowledge the financial support provided by Ministerio de Economía y Competitividad of Spain (Grants MAT2014- 57429-R and MAT2015-65184-C2-2-R). The authors thank David Gómez Vargas assistance with the SEM measurements, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Curcumin to Promote the Synthesis of Silver NPs and their Self-Assembly with a Thermoresponsive Polymer in Core-Shell Nanohybrids

  • Soto-Quintero, Albanelly
  • Guarrotxena, Nekane
  • García Ballesteros, Olga
  • Quijada-Garrido, Isabel
This work presents a simple one-pot protocol to achieve core-doped shell nanohybrids comprising silver nanoparticles, curcumin and thermoresponsive polymeric shell taking advantage of the reducing properties of phenolic curcumin substance and its ability to decorate metallic surfaces. Silver nanoparticles were synthesized, via sodium citrate and silver nitrate addition into a boiling aqueous solution of curcumin, monomers and surfactant. Curcumin and sodium citrate promoted silver nucleation, acting as reducing and stabilizing agents. These curcumin-capped AgNPs enabled, after adding the radical polymerization initiator, the assembling of the growing polymer chains around the hydrophobic AgNP surface. The resultant core-doped shell nanohybrids exhibit plasmonic, luminescent and volume thermoresponsive properties, with improved possibilities to be used as successful therapeutic platforms. In fact, the possibility to nanoconfine the synergistic antioxidant, antiviral, antibacterial features of silver and curcumin in one bioavailable hybrid paves the way to promising applications in the biomedical field., The authors gratefully acknowledge the financial support provided by the Spanish Ministerio de Ciencia, Innovación y Universidades (Grant MAT2014–57429-R and PGC2018–095364-B-100). A.S.-Q. acknowledges CONACYT for the grant EPE 2017–291168. The authors would like to thank David Gómez Vargas assistance with the SEM measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The synthesis of switch-off fluorescent water-stablecopper nanocluster Hg2+ sensors via asimple one-pot approach by an in situ metalreduction strategy in the presence of a thiolatedpolymer ligand template.

  • Benavides, Jesús
  • Quijada-Garrido, Isabel
  • García Ballesteros, Olga
The fabrication of stable fluorescent copper nanoclusters (CuNCs) in aqueous media is still challenging, despite the low price and potential biomedical applications. Herein, we report a facile and efficient strategy for assembling CuNCs using multifunctional thiolated copolymers with pH and thermoresponsive features. The new nanohybrids are formed via a simple one-pot approach through the reduction of a copper salt with hydrazine in the presence of a multithiolated polymer, which provides a template during nanocluster assembly and further efficient protection against oxidation and aggregation. Furthermore, the thermo- and pH-responsive properties of the pristine copolymers endow the nanohybrids with these stimuli-responsive features. The thiol content and the macromolecular size of the polymer ligands exert strong influences on the final photophysical properties of these new hybrid luminescent nanoclusters. The existence of stable bright greenish-yellow emission in water over long periods of time, the high photostability under UV irradiation and the strong oxidation resistance toward hydrogen peroxide of the hybrid CuNCs suggest that they have great promise for nanomedicine, bioassay and nanosensor use. Furthermore, the polymeric CuNCs obtained have been successfully tested as optical switch-off sensors for the sensitive and highly selective detection of Hg2+ in the presence of other metal ions in liquid and solid states. Finally, we demonstrate the practical application of the new hybrid to Hg2+ detection in human urine., The authors are thankful for the financial support from Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the project: PGC2018-095364-B-I00 and Ministerio de Economía y Competitividad (MINECO) through the project: MAT2014- 57429-R. J. Benavides acknowledges Comunidad Autónoma de Madrid (CAM) for his predoctoral fellowship (PEJD-2017-PRE/ IND-4806) through the Garantía Juvenil Program. The authors would like to thank Silvia Villar Rodil for assistance with the XPS measurements. Authors also acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitosan-stabilized Silver Nanoclusters with Luminescent, Photothermal and Antibacterial Properties

  • Nakal-Chidiac, Alberto
  • García Ballesteros, Olga
  • García-Fernández, Luis
  • Martín-Saavedra, Francisco M.
  • Sánchez-Casanova, Silvia
  • Escudero-Duch, Clara
  • San Román, Julio
  • Vilaboa, Nuria
  • Aguilar, María Rosa
The aim of this paper is to achieve in situ photochemical synthesis of silver nanoclusters (AgNCs) stabilized by the multiple-amine groups of chitosan (Ch@AgNCs) with luminescent and photothermal properties. Ch@AgNCs were obtained by applying a fast and simple methodology previously described by our group. Direct functionalization of AgNCs with chitosan template provided new nanohybrids directly in water solution, both in the presence or absence of oxygen. The formation of hybrid AgNCs could be monitored by the rapid increase of the absorption and emission maximum band with light irradiation time. New Ch@AgNCs not only present photoluminescent properties but also photothermal properties when irradiated with near infrared light (NIR), transducing efficiently NIR into heat and increasing the temperature of the medium up to 23 °C. The chitosan polymeric shell associated to AgNCs works as a protective support stabilizing the metal cores, facilitating the storage of nanohybrids and preserving luminescent, photothermal and bactericide properties., The authors are thankful for the financial support from Ministerio de Economía y Competitividad (MINECO) through the project MAT2017- 84277-R and MAT2014-57429-R and Ministerio de Ciencia, Innovación y Universidades (MCIU), Agencia Estatal de Investigaciónn (AEI) and Fondo Europeo de Desarrollo Regional (FEDER, UE) through the projects: PGC2018-095364-B-I00 and RTI2018-095159-B-10
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New concept of spectroscopic detection of the cationic porphyrin via its spontaneous aggregation at Au@thermoresponsive polymer core@shell nanocomposites

  • Šišková, Karolína
  • Guarrotxena, Nekane
  • Sanchez, Miriam Guadano
  • Kapitán, Josef
Spectroscopic detection represents a big part of biomedical, biological, material, and environmental research. Here, the formation of J-aggregates of a tetra-cationic porphyrin (TMPyP), serving as a model adsorbate and known as a sensitizing part of antitumor and therapeutically-active agents, has been evidenced by several spectroscopic methods such as: UV-vis absorption spectroscopy, steady-state fluorescence, resonance Raman scattering (RRS) and surface-enhanced resonance Raman scattering (SERRS). It should be noticed that the tetra-cationic porphyrin does not form aggregates at low concentrations in water spontaneously, nor in the presence of low-molecular-weight species enveloping Au nanoparticles (AuNPs, prepared as references by citrate- and/or borohydride-induced reductions); indeed, rather an aggregation of AuNPs with adsorbed TMPyP were observed in these systems. On the contrary, at the surface of core@shell nanocomposites containing plasmonic AuNPs as a core (of three different sizes: 20, 60, and 100 nm) and selected polymers (two thermoresponsive polymers: poly-N-isopropyl-acrylamide and poly-2-(2-methoxy-ethoxy)ethyl-methacrylate, and polystyrene as a reference) as a shell, J-aggregates of TMPyP were detected by UV-vis absorption, fluorescence, RRS and SERRS for the first time in the present work. The mechanism of spontaneous J-aggregates formation of TMPyP at the nanocomposite surface (in TMPyP concentrations falling well below and/or being slightly above monolayer surface-coverage values) is suggested based on (i) coulombic attraction and (ii) amphiphilicity of the polymeric shells. Slightly elevated temperature (32 °C) and prolonged time of ageing (1 month) of the AuNPs@thermoresponsive polymer nanocomposites with adsorbed porphyrin resulted in a further increase of TMPyP J-aggregates formation. This can be regarded as the second aggregation step of the tetra-cationic porphyrin molecules stuck into polymeric shells that is beneficial for its spectroscopic detection. It can be envisaged that the concept of concentrate formation (aggregation) and spectroscopic detection of low concentrations of any species (even extremely charged and well dissolved in aqueous solution) via its spontaneous aggregation at the surface of AuNPs@thermoresponsive polymer core@shell nanocomposites, more pronounced at slightly elevated temperatures, and concomitant aggregation-induced fluorescence quenching of fluorophores could be exploited in biomedical, biological, material, and environmental research domains., Financial support by the Czech Science Foundation (project no. 25- 15590S) is gratefully acknowledged. Grant MAT2014-57429-R supported by Spanish MINECO and TED2021-129959B-C22, funde MCIN/AEI/10.13039/501100011033 and ‘European Union Next Generation EU/PRTR’ are acknowledged. The authors acknowledge the assistance provided by the Research Infrastructure NanoEnviCz, sup ported by the Ministry of Education, Youth and Sports of the Czech Republic under Project No. LM2018124. Jana Strask ´ a ´ and Toma´ˇs Pluha´ˇcek are thanked for the TEM/EDS measurements and ICP-MS analysis, respectively. Radek Ostruszka and Veronika Svaˇcinova ´ are acknowledged for additional DLS measurements and PSD determina tion, respectivel, Peer reviewed