Pasar al contenido principal

POLIMEROS SENSORES. ETIQUETAS INTELIGENTES CON APLICACION EN BIOMEDICINA Y EN SEGURIDAD ALIMENTARIA

MAT2017-84501-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BURGOS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular Dynamics of Functional Azide-Containing Acrylic Films

  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Vallejos, Saúl
  • García, Félix C.
  • García, José Miguel
[EN] A report on the syntheses, thermal, mechanical and dielectric characterizations of two novel polymeric acrylic materials with azide groups in their pendant structures is presented. Having the same general structure, these polymers differ in length of oxyethylene units in the pendant chain [-CONH-CH2CH2-(O-CH2CH2)(n)N-3], where n is 1 (poly(N-(2-(2-azidoethoxy)ethyl)methacrylamide), PAzMa1) or 2 (poly(N-2-(2-(2-azidoethoxy)ethoxy)ethyl)methacrylamide), PAzMa2), leading with changes in their dynamics. As the thermal decomposition of the azide group is observed above 100 degrees C, dielectric analysis was carried out in the temperature range of -120 degrees C to 100 degrees C. Dielectric spectra of both polymers exhibit in the glassy state two relaxations labelled in increasing order of temperature as gamma- and beta-processes, respectively. At high temperatures and low frequencies, the spectra are dominated by ohmic conductivity and interfacial polarization effects. Both, dipolar and conductive processes were characterized by using different models. Comparison of the dielectric activity obtained for PAzMa1 and PAzMa2 with those reported for crosslinked poly(2-ethoxyethylmethacrylate)(CEOEMA) was performed. The analysis of the length of oxyethylene pendant chain and the effect of the methacrylate or methacrylamide nature on the dynamic mobility was analysed., The financial support provided by Fondo Europeo de Desarrollo Regional (FEDER) and the Spanish Agencia Estatal de Investigación (AEI) (MAT2015-63955-R and MAT2017-84501-R) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microcellular foamed aromatic polyamides (aramids). Structure, thermal and mechanical properties

  • Pascual, B. S.
  • Trigo-López, M.
  • Ramos, C.
  • Sanz, M. T.
  • Pablos, Jesús L.
  • García, F. C.
  • Reglero Ruiz, J. A.
  • García, J. M.
We have deeply diminished the density of high performance aromatic polyamides or aramids. Thus, we have prepared microcellular films that at the same time maintain the outstanding thermal and mechanical properties characteristic of these high performance materials. Two different cellular aramids were produced, based on commercial poly(m-phenylene isophthalamide), one of them with an additional azide group. Microcellular structures have been obtained by adding ionic liquids combined to ScCO foaming process, with cell sizes between 0.6 and 4.7 µm and cell densities between 10 and 10 cells cm. The density was lowered for the commercial poly(m-phenylene isophthalamide) (Nomex® and Teijin Conex®) from 1.43 to 0.62 g cm and from 1.48 to 0.31 g cm for the aramid containing the azide group. Foams present the following thermal and mechanical properties: 5% weight loss observed at T > 400 °C and relative Young modulus and tensile strength of 1.2 GPa (g cm) and 60 MPa (g cm), respectively., The financial support provided by FEDER (Fondo Europeo de Desarrollo Regional) and the Spanish Agencia Estatal de Investigación (MAT2017-84501-R) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous aromatic polyamides the easy and green way

  • Pascual, B. S.
  • Trigo-López, M.
  • Reglero Ruiz, J. A.
  • Pablos, Jesús L.
  • Bertolín, J. C.
  • Represa, C.
  • Cuevas-Vicario, José Vicente
  • García, F. C.
  • García, J. M.
We prepared microporous aramid films through a simple, inexpensive and green way, using ionic liquids (IL) as porosity promoters. Commercial poly(m-phenylene isophthalamide) (MPIA) films with different IL proportions were prepared, and then microporous films were obtained by removing the IL in distilled water. Microporous films presented density values between 0.34 and 0.71 g⋅cm (around five times lower to commercial MPIA), with a homogeneous and controlled cellular morphology dependent on the proportion of the IL, showing cell sizes in the microcellular range (radii between 1 and 8 µm). Thermal, mechanical and electrical properties (specifically ionic conductivity) of the aramid films were analyzed to evaluate the influence of the IL proportion. Finally, it was observed that the MPIA/IL system presented a reversible thermally induced phase-separation process around 60 °C, which was characterized through AFM-Raman images and spectra, together with the variation of the ionic conductivity., The financial support provided by FEDER (Fondo Europeo de Desarrollo Regional) and both the Spanish Agencia Estatal de Investigación (MAT2017-84501-R) and the Consejería de Educación- Junta de Castilla y León (BU306P18) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photopolymerization of ionic liquids in flexible microporous aramids for ion conductive solid polyelectrolytes

  • Trigo-López, M.
  • Reglero Ruiz, J. A.
  • Pablos, Jesús L.
  • Ciurduc, D. E.
  • Corrales, Teresa
  • García, F. A.
  • García, J. M.
This work presents the preparation of novel solid polymer electrolytes based on flexible microporous aramids filled with photopolymerized ionic liquids and lithium salt. The materials combined a high ionic conductivity with the mechanical and thermal characteristics of the aramids, including also good flexibility and handleability. First, a simple casting process was followed to obtain microporous aramids with an interconnected channel morphology. In a second step, this channel structure was filled with a solution of non-commercial photopolymerizable ionic liquid, commercial ionic liquids and the lithium salt, followed by UV irradiation to obtain the conducting aramids. Ionic conductivity of the materials was studied at 25 °C, and also in the temperature range between −50 to 90 °C, together with SEM analyses of the filled porous structure and thermal properties, to fully characterize the photopolymerization process of the ionic liquids inside the porous structure. The materials showed high ionic conductivity values together with excellent thermal and mechanical properties, indicating their viability as flexible and thermally stable solid electrolytes., We gratefully acknowledge the financial support provided by FEDER (Fondo Europeo de Desarrollo Regional) and both the Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R and MAT2017-88923-P), the Consejería de Educación-Junta de Castilla y León (BU306P18) and the Spanish Ministerio de Ciencia e Innovación (PID2019-108583RJ-I00/AEI/10.13039/501100011033)
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Photopolymerization of ionic liquids in flexible microporous aramids for ion conductive solid polyelectrolytes

  • Trigo López, Miriam
  • Reglero Ruiz, José A.
  • Pablos, Jesús Luis
  • Ciurduc, Diana Elena
  • Corrales, T.
  • García García, Félix Clemente
  • García Pérez, José Miguel
This work presents the preparation of novel solid polymer electrolytes based on flexible microporous aramids filled with photopolymerized ionic liquids and lithium salt. The materials combined a high ionic conductivity with the mechanical and thermal characteristics of the aramids, including also good flexibility and handleability. First, a simple casting process was followed to obtain microporous aramids with an interconnected channel morphology. In a second step, this channel structure was filled with a solution of non-commercial photopolymerizable ionic liquid, commercial ionic liquids and the lithium salt, followed by UV irradiation to obtain the conducting aramids. Ionic conductivity of the materials was studied at 25 °C, and also in the temperature range between −50 to 90 °C, together with SEM analyses of the filled porous structure and thermal properties, to fully characterize the photopolymerization process of the ionic liquids inside the porous structure. The materials showed high ionic conductivity values together with excellent thermal and mechanical properties, indicating their viability as flexible and thermally stable solid electrolytes., FEDER (Fondo Europeo de Desarrollo Regional) and both the Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R and MAT2017-88923-P), the Consejería de Educacion-Junta ´ de Castilla y Leon ´ (BU306P18) and the Spanish Ministerio de Ciencia e Innovacion ´ (PID2019-108583RJ-I00/AEI/10.13039/501100011033).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Monitoring of the evolution of human chronic wounds using a ninhydrin-based sensory polymer and a smartphone

  • Guembe García, Marta
  • Santaolalla García, Victoria
  • Moradillo Renuncio, Natalia
  • Ibeas Cortes, Saturnino
  • Reglero Ruiz, José A.
  • García García, Félix Clemente
  • Pacheco Bonrostro, Joaquín
  • Casado Yusta, Silvia
  • García Pérez, José Miguel
  • Vallejos Calzada, Saúl
The healing processes in cutaneous wounds, i.e., chronic wounds, represent a health problem affecting 1–2 % of the population. The evaluation of these wounds is mainly based on subjective parameters, although there is a medical consensus on protease activity as the best marker for healing disorders. Here we show the correlation of the amino acid concentration on chronic wounds and with their evolution, and the development of a test kit to straightforward determining this evolution. Our test kit is a colorimetric sensory polymer film that change its colour upon contacting amino acids. The kit allows for the quantification of the overall amino acid concentration by simply analysing the colour definition parameters of the sensory film obtained from of a photograph taken with a smartphone. We analysed with the kit the amino acid concentration of human chronic wounds of 34 patients and we mathematically demonstrate that there is a correlation with the amino acid concentration, related with the protease activity, and the evolution of the wound’s diagnoses. This kit can help diagnosis of human chronic wounds, usually evaluated and treated along time by different physicians, or even by different medical teams, providing an analytical tool not subjected to subjective evaluation., Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R and ECO2016-76567-C4-2-R) and the Consejería de Educación, Junta de Castilla y León (BU306P18 and BU071G19
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

A simple one-pot determination of both total phenolic content and antioxidant activity of honey by polymer chemosensors

  • González Ceballos, Lara
  • Cavia Camarero, María del Mar
  • Fernández Muiño, Miguel Ángel
  • Osés Gómez, Sandra María
  • Sancho Ortiz, María Teresa
  • Ibeas Cortes, Saturnino
  • García García, Félix Clemente
  • García Pérez, José Miguel
  • Vallejos Calzada, Saúl
We have developed a new method for the rapid (2 h) and inexpensive (materials cost < 0.02 €/sample) “2-in-1” determination of the total phenolic content (TPC) and the antioxidant activity (AOX) in honey samples. The method is based on hydrophilic colorimetric films with diazonium groups, which react with phenols rendering highly colored azo groups. The TPC of the sample is correlated to its trolox equivalent antioxidant capacity (TEAC). The intensity of the color allows us to determine both TPC and TEAC of the sample by the analysis of a picture taken with a smartphone that is analysed by the use of the color-definition-parameters (RGB). The controlled light conditions and the systematic use of the same camera avoid the periodical calibration of the system improving the efficiency of the method. Thus, it is a simple method carried out by non-specialized personnel and it involves much lower money and time investment compared to traditional methods., We gratefully acknowledge the financial support provided by FEDER (Fondo Europeo de Desarrollo Regional), and both the Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R) and the Consejería de Educación—Junta de Castilla y León (BU061U16 and BU041G18) are gratefully acknowledged.