Pasar al contenido principal

POLIMEROS PARA APLICACIONES MEDIOAMBIENTALES: DEGRADABLES Y SENSORES

MAT2017-88923-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photodegradation and Biodegradation Under Thermophile Conditions of Mulching Films Based on Poly(Butylene Adipate-co-Terephthalate) and Its Blend with Poly(Lactic Acid)

  • Morro, A.
  • Catalina, Fernando
  • Sánchez-León, Enrique
  • Abrusci, C.
Two commercial mulching films based on aliphatic–aromatic copolyesters, poly(butylene adipate-co-terephthalate) (PBAT) and its blend with poly(lactic acid) (PBAT/PLA) were selected to study their photodegradation and their biodegradation under thermophile conditions. The films were buried in an agricultural field and bacteria were isolated from these. Bacterial strains were characterized with a combination of culture-dependent methods and sequencing of part of the 16S ribosomal RNA gene (rDNA). The most prevalent genus isolated was Bacillus and other related genera were found as well. Consortia of the isolated indigenous bacterial strains, IDN-EF and IDN-EC, and an additional consortia that had been previously isolated from exposed polyethylene, Bacillus-MIX, were prepared to perform the biodegradation assay at 45 °C on highly photodegraded films. Changes in the films were studied using chemiluminescence, ATR–FTIR, contact angle, SEM, GPC, DSC and TGA. A biodegradation assay was also performed on the four monomers that constitute the polymers using Bacillus subtilis and Bacillus licheniformis. Mineralization was evaluated by carbon dioxide measurements using an indirect impedance technique. This technique showed that overall there was a higher mineralization for the photodegraded materials. However, the biodegradation was most efficient when B. subtilis was present in the bacterial consortium and especially when the materials had been previously photodegraded., This study was supported by MINECO (Project Ref. MAT2017-88923) and UAM (Project Ref. G.C:108/ATO)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermo-responsive microfibrillar graft copolymer based on carboxymethylagarose and N-isopropylacrylamide

  • Ortiz, J. A.
  • Catalina, Fernando
  • Corrales, Teresa
  • Soto, Cenit
  • Zapata, P. A.
Carboxymethylation of agarose with ClCHCOOH in 2-propanol, formamide or dimethyl sulfoxide were evaluated in order to obtain water soluble derivatives. Higher yield (86%) and degree of substitution of carboxymethylation in primary alcoholic groups (0.70) were obtained using dimethyl sulfoxide. Carboxymethylagarose-g-PNIPAAm copolymers were synthesized by free radical graft copolymerization using Ce and SO /TEMED as initiators via conventional or microwave-assisted methods. Carboxymethyl derivatives and graft copolymers were characterized by FT-IR and NMR spectroscopies, elemental analysis, TGA and DSC and morphology analysis by SEM and AFM. High nitrogen content (9.7%) was found with Ce by conventional method and the obtained analysis allowed to confirm the NIPAAm grafting on the carboxymethylagarose chain. Thermoresponsive materials have a low critical solution temperature between 32 and 34 °C. Thermal stability increased ca. 60% with PNIPAAm grafting. Surface analysis of copolymers reveals a microfibrillar type morphology with diameter of 4–6 μm. Synthesized glycoconjugates could find applications in bioactive compounds transport in biological systems., The authors are especially grateful to Dr. Betty Matsuhiro for her hard guidance, suggestions and corrections of this work, in addition to her great spirit, which was a source of inspiration for us. The financial support of DICYT and 021941ZR_POSTDOC_DICYT, Universidad de Santiago de Chile, is gratefully acknowledged. J.A. Ortiz thanks CONICYT, thesis support code 21120261 and Becas Chile for doctoral fellowships. P. Zapata acknowledges the support of FONDECYT Project 1170226. T. Corrales also thanks the financial support of MAT2017- 88923-P (Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photopolymerization of ionic liquids in flexible microporous aramids for ion conductive solid polyelectrolytes

  • Trigo-López, M.
  • Reglero Ruiz, J. A.
  • Pablos, Jesús L.
  • Ciurduc, D. E.
  • Corrales, Teresa
  • García, F. A.
  • García, J. M.
This work presents the preparation of novel solid polymer electrolytes based on flexible microporous aramids filled with photopolymerized ionic liquids and lithium salt. The materials combined a high ionic conductivity with the mechanical and thermal characteristics of the aramids, including also good flexibility and handleability. First, a simple casting process was followed to obtain microporous aramids with an interconnected channel morphology. In a second step, this channel structure was filled with a solution of non-commercial photopolymerizable ionic liquid, commercial ionic liquids and the lithium salt, followed by UV irradiation to obtain the conducting aramids. Ionic conductivity of the materials was studied at 25 °C, and also in the temperature range between −50 to 90 °C, together with SEM analyses of the filled porous structure and thermal properties, to fully characterize the photopolymerization process of the ionic liquids inside the porous structure. The materials showed high ionic conductivity values together with excellent thermal and mechanical properties, indicating their viability as flexible and thermally stable solid electrolytes., We gratefully acknowledge the financial support provided by FEDER (Fondo Europeo de Desarrollo Regional) and both the Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R and MAT2017-88923-P), the Consejería de Educación-Junta de Castilla y León (BU306P18) and the Spanish Ministerio de Ciencia e Innovación (PID2019-108583RJ-I00/AEI/10.13039/501100011033)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid Fluorescence pH Sensors Based on 1,8-Naphthalimide Copolymers Synthesized by UV Curing

  • Pablos, Jesús L.
  • Hernández, E.
  • Catalina, Fernando
  • Corrales, Teresa
Novel water-swollen photo-crosslinked membranes were obtained by copolymerization of the N-vinylpyrrolidone, butyl acrylate and ethyl methacrylate monomers functionalized with naphthalimide groups, as pH sensitive fluorescence probes. For that purpose, two monomers with pending naphthalimide groups anchored to ethyl methacrylate through alkyl chains with different length, were previously synthesized. The membranes were characterized using different techniques. The pH dependence of absorbance and the corresponding quenching of fluorescence were investigated and related to the structure of naphthalimide substituents linked to the membrane. The new solid sensors exhibited sensitive fluorescence changes at pH < 3, and lower time response was determined for membranes where the sensing group was linked through longer alkyl chain to the polymer matrix. The membranes were solid, thermally stable and easily handled to be applied as sensor materials, and showed a reversible behavior, which is an important feature for further fabrication of an economical on-site tool for the acidity detection in aqueous environments., This study was financed by MINECO (Project Ref. MAT2017-8892)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New PCL/PEC Blends: In Vitro Cell Response of Preosteoblasts and Human Mesenchymal Stem Cells

  • Pablos, Jesús L.
  • Cicuéndez, Mónica
  • Hernández-Rivas, María
  • Catalina, Fernando
  • Vallet-Regí, María
  • Corrales, Teresa
In this study, new blends of PCL/PEC have been prepared in an easy manner by casting with the objective of obtaining new biomaterials to apply to tissue engineering and bone regeneration. The PCL/PEC blends obtained, together with neat polymer blends, were characterized by infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). This full characterization is the key to disentangle the miscibility, which means good compatibility, of the polymer blends used in this work. The addition of increasing amounts of PEC, has shown in the new biomaterials obtained, a remarkable improvement in relation with the mechanical properties (manageable materials) and above all, in terms of an increase in their hydrophilic character with respect to the PCL neat polymer. The improvement of all these properties is reflected in their biological properties. With these thoughts in mind, the blends obtained were tested through the assessment of several biological parameters such as cell viability, proliferation, and differentiation of both the MC3T3-E1 osteoblastic cell line and hMSCs to evaluate their cell response to different polymer membranes aimed at bone tissue regeneration. “In vitro” biocompatibility methods have been chosen rather than in vivo studies due to their lower cost, faster procedure time, and minimum ethical concerns, and because it was the first time that the biological effects of these blends were studied. The results show that the PCL/PEC blends obtained, with tunable properties in terms of hydrophilic character and hydrolytic degradation, may be regarded as good candidates to perform “in vivo” tests and check their real-life applicability for bone regeneration. The polymer acronym (the weight percentage in the sub index) is PCLx/PECy as noted in table one with the summary of compositions., This research was financed by MINECO (Project Ref. MAT2017-88923, Project Ref. PID2021-124926NB-I00) and by European Research Council, Advanced Grant Verdi-Proposal No. 694160 (ERC-2015-AdG).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible Colorimetric and Fluorescence Solid Sensors Based on Aryl Hydrazone Derivatives of 1,8-Naphthalimides for Caustic Media and Biogenic Amine Vapors

  • Pablos, Jesús L.
  • Fernández-Alonso, Sabela
  • Catalina, Fernando
  • Corrales, Teresa
Fluorescence and colorimetric solid sensors for caustic media and biogenic amine vapors have been prepared. For this purpose, several hydrazone derivatives of naphthalimides were synthesized and anchored to a photo-crosslinked membrane functionalized with acid chloride groups. The membranes were characterized using different techniques, and their thermal properties and swelling degree were determined. The new naphthalimides and the membranes were evaluated as sensors by determining the change in their spectroscopic properties of absorption and fluorescence with pH. The polymeric sensors exhibit improved stability and can be reused, as a consequence of their solid character and the reversibility of the process. Furthermore, membranes were evaluated as a sensor of trimethylamine vapors through their absorption and fluorescence bands, and the color change in the membrane showed that it could be used to detect basic media with the naked eye. Finally, membranes were packaged in Petri dishes at a controlled temperature with fresh fish bought in the local market. Then, the real chance of using the sensory materials was determined by analyzing the color change in samples., This study was financed by MINECO (Project Ref. MAT2017- 88923 and Project Ref. PID2021-124926NB-I00)).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Photopolymerization of ionic liquids in flexible microporous aramids for ion conductive solid polyelectrolytes

  • Trigo López, Miriam
  • Reglero Ruiz, José A.
  • Pablos, Jesús Luis
  • Ciurduc, Diana Elena
  • Corrales, T.
  • García García, Félix Clemente
  • García Pérez, José Miguel
This work presents the preparation of novel solid polymer electrolytes based on flexible microporous aramids filled with photopolymerized ionic liquids and lithium salt. The materials combined a high ionic conductivity with the mechanical and thermal characteristics of the aramids, including also good flexibility and handleability. First, a simple casting process was followed to obtain microporous aramids with an interconnected channel morphology. In a second step, this channel structure was filled with a solution of non-commercial photopolymerizable ionic liquid, commercial ionic liquids and the lithium salt, followed by UV irradiation to obtain the conducting aramids. Ionic conductivity of the materials was studied at 25 °C, and also in the temperature range between −50 to 90 °C, together with SEM analyses of the filled porous structure and thermal properties, to fully characterize the photopolymerization process of the ionic liquids inside the porous structure. The materials showed high ionic conductivity values together with excellent thermal and mechanical properties, indicating their viability as flexible and thermally stable solid electrolytes., FEDER (Fondo Europeo de Desarrollo Regional) and both the Spanish Ministerio de Economía, Industria y Competitividad (MAT2017-84501-R and MAT2017-88923-P), the Consejería de Educacion-Junta ´ de Castilla y Leon ´ (BU306P18) and the Spanish Ministerio de Ciencia e Innovacion ´ (PID2019-108583RJ-I00/AEI/10.13039/501100011033).