Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

LoRaMesher: An open-source library for multi-hop LoRa mesh networks

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Baig Viñas, Roger|||0000-0001-9813-7678
LoRaMesher is an open-source C++ library that enables multi-hop mesh networks over LoRa communication on ESP32 microcontroller boards. The library implements a proactive distance-vector routing protocol that maintains routing tables on each node and provides unicast, broadcast, and reliable message delivery, including fragmentation and reassembly for large payloads. LoRaMesher leverages RadioLib for radio access and FreeRTOS for task scheduling, and integrates with PlatformIO for development. By allowing LoRa devices to communicate directly in a mesh network, rather than via LoRaWAN gateways, the library enables fully distributed applications on low-power IoT nodes. This paper describes the LoRaMesher software, its architecture, main functionalities, and usage examples, and discusses its relevance for research and applied IoT deployments., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under projects PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects and PDC2023-145809-I0 AEI 2023 Knowledge Generation Projects, financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Next-generation wireless backhaul design for rural areas

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Maccari, Leonardo
Rural areas often face significant challenges in accessing reliable broadband Internet due to high infrastructure costs and low population density. To address this issue, we propose a model for evaluating the performance and the cost of a mesh-based, last- and middle-mile replacement for broadband connection in these underserved regions. We use open data from ten underserved municipalities to assess the demand, plan the mesh network, and estimate the allocated capacity per user. We consider two designs: a low-cost network using the classical 5 GHz unlicensed band, and a high-performance one using mmWave frequency. For both designs, we estimate the Operating Expenditure and the amortized Capital Expenditure using realistic device prices and operating cost estimations. We compare the price of the mesh-based solution with alternatives based on xDSL and satellite connectivity and show that it has competitive prices compared to existing offers, covering a larger portion of households than DSL. We open-source both the code and the elaborated data to reproduce, extend, and improve our results in different settings., Partially funded by the Spanish grants PDC2023- 145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large and reliable data transfer service for LoRa mesh network applications

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Baig Viñas, Roger|||0000-0001-9813-7678
Recently, LoRa mesh networks have appeared as a communication technology for Internet of Things (IoT) devices. Through node-to-node communication, novel distributed IoT applications that extend beyond the capabilities of the LoRaWAN architecture can be enabled. However, current technologies for LoRa networks do not provide mechanisms for large and reliable data transfers between IoT nodes. This paper presents a service for such data transfers in LoRa mesh network applications, along with the protocol and formats used for inter-node communication. We explain the design choices and detail the implementation decisions to ensure that this service is practically usable. To this end, the service was integrated into the LoRaMesher library and is available as an open-source operational implementation. In experiments with ten real nodes and two network topologies, we observe that the service effectively achieves a large and reliable message delivery in an environment of concurrent transmissions and packet losses. In contrast, the cost of reliability for large data transfers is an increased number of messages and a higher delivery time. With the integration of the service into the LoRaMesher technology, developers now have a library that provides a reliable and large payload service for LoRa mesh network applications, eliminating the need to develop such capacity as a specific application-level solution., This work was funded by the Spanish Ministerio de Ciencia, Innovación Universidades through the grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects) MICIU/AEI/10.13039/501100011033/; the Recovery and Resilience Mechanism of the European Union; and by the European Union NextGenerationEU; and the Generalitat de Catalunya, Spain through the grants 2021-SGR-01059; and the Universitat Politècnica de Catalunya, Spain through the grant ALECTORS 0BV05-1. The authors gratefully acknowledge the insightful comments and constructive feedback provided by the anonymous reviewers., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A minimalistic distance-vector routing protocol for LoRa mesh networks

  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Baig Viñas, Roger|||0000-0001-9813-7678
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
LoRa is popular in the Internet of Things (IoT) domain as a Low Power,Wide Area Network (LPWAN) radio technology, providing low-power and long-range communication in the sub-GHz band. Most often, LoRa is used as part of the LoRaWAN architecture with a star-of-stars topology, but it can also be operated standalone. This paper presents and evaluates a minimalistic Routing Protocol (RP) for building LoRa networks with a more flexible mesh network topology. We propose a Time on Air (ToA) metric that, when used in heterogeneous network topologies, can take better advantage of LoRa’s multiple Spreading Factors (SFs), and their trade-off between transmission distance and bit rate, and their quasi-orthogonality property. We evaluate the routing protocol with the FLoRa framework and OMNeT++ and compare it with other common routing strategies. Our experiments provide a comprehensive understanding of the routing protocol performance concerning the scalability, throughput, and latency in several topology and network traffic scenarios. When using the ToA metric, we observed in LoRa mesh networks formed by random topologies and heterogeneous links the positive impact of a more balanced Packet Delivery Ratio (PDR) among the nodes with different network centrality, suggesting hence the multi-SF ToA metric to be used for improved PDR in conditions that are expected to occur in real-world systems. Regarding goodput, we observed that using multiple SF simultaneously had a limited impact on low to high traffic loads but dramatically improved throughput and goodput in traffic saturation scenarios. This suggests that multi-SF operation would be preferred to maximize network performance.We observed the best latency performance with multi-SF ToA for low and medium traffic loads, especially for the random topology, where the metric can again take advantage of the node and link heterogeneity., This work was supported in part by Spanish State Research Agency under Grant PDC2023-145809-I00/AEI/10.13039/501100011033, in part by the Recovery and Resilience Mechanism of European Union, and in part by European Union-NextGenerationEU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

eXO: a commons-based community network Internet Service Provider, description and subscribers usage patterns

  • Baig Viñas, Roger|||0000-0001-9813-7678
  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Vilchez Blanco, Pedro
  • Foglia Romero, Efraín
The advent of Wi-Fi in the 1990s stimulated the creation of Community networks (CNs), a new networking paradigm deployed and maintained by their users. The non-profit and grassroots self-organization of CNs has shown significant potential in enhancing communication technologies grounded in ethical values, transcending mere Internet expansion to contribute to broader social impacts. Since its conception, hundreds of CNs have been deployed worldwide. However, many have faltered, primarily due to a lack of solid economic models and legal setup. This paper presents Expansió Xarxa Oberta (eXO) association, a commons Internet Service Provider (ISP). In contrast to commercial ISPs, eXO follows the same grassroots principles of CNs. Establishing a commons-based ISP is challenging, yet it is a key component for the sustainability and success of CNs. Therefore, our paper aims to dissect the complexity of a commons ISP by explaining eXO, a pioneering example that has already been in production for more than 14 years. To the best of our knowledge, this is the first time that a commons ISP is described in all its components. To describe eXO, we have proceeded in two parts. In the first one, we delineate the organizational structure, economics, funding mechanisms, activities, legal framework, and infrastructure. To gain more insight on eXO, in the second part, we conduct a technical analysis of traffic data collected from eXO’s core router, elucidating subscriber usage patterns. Our study encompasses various subscriber categories, including regular and financially subsidized users, Wi-Fi and optical fiber access, and traffic characteristics such as volume, TCP/UDP usage, services accessed, and traffic distribution across countries., This work was funded by the Spanish Ministerio de Ciencia Innovación y Universidades through the grant PDC2023-145809-I00/AEI/ 10.13039/501100011033; and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects); the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU; the Generalitat de Catalunya through the grants 2021-SGR01059, 2021-SGR-01476, and Comunalitats Urbanes 2022-2024; and the Universitat Politècnica de Catalunya through the grant ALECTORS 0BV05-1., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large and reliable data transfer service for LoRa mesh network applications

  • Miquel Solé, Joan
  • Pueyo Centelles, Roger
  • Freitag, Fèlix
  • Meseguer Pallarès, Roc
  • Baig Viñas, Roger
Recently, LoRa mesh networks have appeared as a communication technology for Internet of Things (IoT) devices. Through node-to-node communication, novel distributed IoT applications that extend beyond the capabilities of the LoRaWAN architecture can be enabled. However, current technologies for LoRa networks do not provide mechanisms for large and reliable data transfers between IoT nodes. This paper presents a service for such data transfers in LoRa mesh network applications, along with the protocol and formats used for inter-node communication. We explain the design choices and detail the implementation decisions to ensure that this service is practically usable. To this end, the service was integrated into the LoRaMesher library and is available as an open-source operational implementation. In experiments with ten real nodes and two network topologies, we observe that the service effectively achieves a large and reliable message delivery in an environment of concurrent transmissions and packet losses. In contrast, the cost of reliability for large data transfers is an increased number of messages and a higher delivery time. With the integration of the service into the LoRaMesher technology, developers now have a library that provides a reliable and large payload service for LoRa mesh network applications, eliminating the need to develop such capacity as a specific application-level solution., This work was funded by the Spanish Ministerio de Ciencia, Innovación Universidades through the grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects) MICIU/AEI/10.13039/501100011033/; the Recovery and Resilience Mechanism of the European Union; and by the European Union NextGenerationEU; and the Generalitat de Catalunya, Spain through the grants 2021-SGR-01059; and the Universitat Politècnica de Catalunya, Spain through the grant ALECTORS 0BV05-1. The authors gratefully acknowledge the insightful comments and constructive feedback provided by the anonymous reviewers., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Next-generation wireless backhaul design for rural areas

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç
  • Maccari, Leonardo
Rural areas often face significant challenges in accessing reliable broadband Internet due to high infrastructure costs and low population density. To address this issue, we propose a model for evaluating the performance and the cost of a mesh-based, last- and middle-mile replacement for broadband connection in these underserved regions. We use open data from ten underserved municipalities to assess the demand, plan the mesh network, and estimate the allocated capacity per user. We consider two designs: a low-cost network using the classical 5 GHz unlicensed band, and a high-performance one using mmWave frequency. For both designs, we estimate the Operating Expenditure and the amortized Capital Expenditure using realistic device prices and operating cost estimations. We compare the price of the mesh-based solution with alternatives based on xDSL and satellite connectivity and show that it has competitive prices compared to existing offers, covering a larger portion of households than DSL. We open-source both the code and the elaborated data to reproduce, extend, and improve our results in different settings., Partially funded by the Spanish grants PDC2023- 145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

eXO: a commons-based community network Internet Service Provider, description and subscribers usage patterns

  • Baig Viñas, Roger
  • Cerdà Alabern, Llorenç
  • Vilchez Blanco, Pedro
  • Foglia Romero, Efraín
The advent of Wi-Fi in the 1990s stimulated the creation of Community networks (CNs), a new networking paradigm deployed and maintained by their users. The non-profit and grassroots self-organization of CNs has shown significant potential in enhancing communication technologies grounded in ethical values, transcending mere Internet expansion to contribute to broader social impacts. Since its conception, hundreds of CNs have been deployed worldwide. However, many have faltered, primarily due to a lack of solid economic models and legal setup. This paper presents Expansió Xarxa Oberta (eXO) association, a commons Internet Service Provider (ISP). In contrast to commercial ISPs, eXO follows the same grassroots principles of CNs. Establishing a commons-based ISP is challenging, yet it is a key component for the sustainability and success of CNs. Therefore, our paper aims to dissect the complexity of a commons ISP by explaining eXO, a pioneering example that has already been in production for more than 14 years. To the best of our knowledge, this is the first time that a commons ISP is described in all its components. To describe eXO, we have proceeded in two parts. In the first one, we delineate the organizational structure, economics, funding mechanisms, activities, legal framework, and infrastructure. To gain more insight on eXO, in the second part, we conduct a technical analysis of traffic data collected from eXO’s core router, elucidating subscriber usage patterns. Our study encompasses various subscriber categories, including regular and financially subsidized users, Wi-Fi and optical fiber access, and traffic characteristics such as volume, TCP/UDP usage, services accessed, and traffic distribution across countries., This work was funded by the Spanish Ministerio de Ciencia Innovación y Universidades through the grant PDC2023-145809-I00/AEI/ 10.13039/501100011033; and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects); the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU; the Generalitat de Catalunya through the grants 2021-SGR01059, 2021-SGR-01476, and Comunalitats Urbanes 2022-2024; and the Universitat Politècnica de Catalunya through the grant ALECTORS 0BV05-1., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LoRaMesher: An open-source library for multi-hop LoRa mesh networks

  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Baig Viñas, Roger
LoRaMesher is an open-source C++ library that enables multi-hop mesh networks over LoRa communication on ESP32 microcontroller boards. The library implements a proactive distance-vector routing protocol that maintains routing tables on each node and provides unicast, broadcast, and reliable message delivery, including fragmentation and reassembly for large payloads. LoRaMesher leverages RadioLib for radio access and FreeRTOS for task scheduling, and integrates with PlatformIO for development. By allowing LoRa devices to communicate directly in a mesh network, rather than via LoRaWAN gateways, the library enables fully distributed applications on low-power IoT nodes. This paper describes the LoRaMesher software, its architecture, main functionalities, and usage examples, and discusses its relevance for research and applied IoT deployments., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under projects PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects and PDC2023-145809-I0 AEI 2023 Knowledge Generation Projects, financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A minimalistic distance-vector routing protocol for LoRa mesh networks

  • Pueyo Centelles, Roger
  • Meseguer Pallarès, Roc
  • Freitag, Fèlix
  • Baig Viñas, Roger
  • Navarro Moldes, Leandro
LoRa is popular in the Internet of Things (IoT) domain as a Low Power,Wide Area Network (LPWAN) radio technology, providing low-power and long-range communication in the sub-GHz band. Most often, LoRa is used as part of the LoRaWAN architecture with a star-of-stars topology, but it can also be operated standalone. This paper presents and evaluates a minimalistic Routing Protocol (RP) for building LoRa networks with a more flexible mesh network topology. We propose a Time on Air (ToA) metric that, when used in heterogeneous network topologies, can take better advantage of LoRa’s multiple Spreading Factors (SFs), and their trade-off between transmission distance and bit rate, and their quasi-orthogonality property. We evaluate the routing protocol with the FLoRa framework and OMNeT++ and compare it with other common routing strategies. Our experiments provide a comprehensive understanding of the routing protocol performance concerning the scalability, throughput, and latency in several topology and network traffic scenarios. When using the ToA metric, we observed in LoRa mesh networks formed by random topologies and heterogeneous links the positive impact of a more balanced Packet Delivery Ratio (PDR) among the nodes with different network centrality, suggesting hence the multi-SF ToA metric to be used for improved PDR in conditions that are expected to occur in real-world systems. Regarding goodput, we observed that using multiple SF simultaneously had a limited impact on low to high traffic loads but dramatically improved throughput and goodput in traffic saturation scenarios. This suggests that multi-SF operation would be preferred to maximize network performance.We observed the best latency performance with multi-SF ToA for low and medium traffic loads, especially for the random topology, where the metric can again take advantage of the node and link heterogeneity., This work was supported in part by Spanish State Research Agency under Grant PDC2023-145809-I00/AEI/10.13039/501100011033, in part by the Recovery and Resilience Mechanism of European Union, and in part by European Union-NextGenerationEU., Peer Reviewed, Postprint (published version)