Pasar al contenido principal

SUBSTRATO DE RED DE LAS COSAS Y DE DISPOSITIVOS PERIMETRALES INTELIGENTE PARA UN MUNDO DIGITAL SOSTENIBLE

PID2023-146066OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Middleware for distributed applications in a LoRa mesh network

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Baig Viñas, Roger|||0000-0001-9813-7678
Recently, LoRa mesh networks have gained increasing interest as a communication layer for sending data between IoT nodes. However, the network service of the firmware on the microcontroller-based nodes is typically limited to sending and receiving LoRa packets through the LoRa radio. Therefore, the packet processing by the node has to be done using an application-specific implementation. In this article, we present the design and implementation of a middleware that facilitates the development and operation of multiple distributed applications on LoRa mesh network nodes. The components we propose leverage the routing capacity of a LoRa mesh network enabled by the LoRaMesher library and provide a service for applications to send and receive messages from each other. Running several applications concurrently is also supported. We experiment with the middleware implemented in the node firmware with distributed applications that span from the LoRa mesh network to the Internet over MQTT. Our results show the support of bidirectional application-level communication, which can be used to build cross-network distributed applications that integrate services on LoRa mesh network nodes., This work was funded by the Spanish Ministerio de Ciencia Innovación y Universidades through the grant PDC2023-145809-I00/AEI/10.13039/501100011033; and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects); the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU; the Generalitat de Catalunya through the grant 2021-SGR01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing the impacts of computer reuse for digital inclusion from product information

  • Roura Salietti, Mireya
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Giménez, Sergio
Computer reuse is promoted as a strategy to reduce environmental impact, create local employment, and provide digital access. However, the development of sustainability indicators to inform policy has remained limited. This is due to the lack of empirical data on device lifespans and regional context, which forces Life Cycle Assessment (LCA) practitioners to rely on generic assumptions that limit the accuracy of impact estimations. This study addressed these gaps by developing an LCA-based calculation criterion designed to integrate multiple parameters using device-level data. The criterion is specifically tailored to provisioning scenarios targeting digitally excluded communities and was partially applied using a Dataset and lifespans of 710 refurbished devices from the eReuse initiative in Spain. Three provisioning scenarios (single user, two users with reuse, two users with new devices) were evaluated for Spain and extrapolated to South Africa and Sweden with contrasting electricity mixes to quantify the influence of energy in use. Reuse proved more advantageous than supplying new devices in terms of GWP per hour of digital access, and a one-at-a-time sensitivity analysis showed that the magnitude of this benefit is highly sensitive to device lifespans and electricity emission factors. Future integration of digital product information into LCA is expected to enhance the precision of sustainability indicators used to inform policy., We are grateful to all organisations and community initiatives from eReuse for their time and insights, particularly to David Franquesa and In`edit. This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under project PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU, and by the Department of Research and Universities of the Generalitat de Catalunya under project 2024 IMPAC 00065. The NGI DLT4EU and NGI Policy provided additional support in Practice projects, the Subtract project (Interreg Europe), the Association for Progressive Communications (APC), the Catalan Waste Agency, the Centre for Development Cooperation at Universitat Polit`ecnica de Catalunya, and the Barcelona City Council., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Managing a digital product passport for products with critical raw materials

  • Navarro Moldes, Leandro|||0000-0003-4775-5526
  • Gallina, Viola
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Mladek, Carla
  • Steinwender, Arko
  • Vilchez Blanco, Pedro
Greenwashing has emerged as a prevalent challenge in sustainability discourse, wherein companies market products as environmentally friendly without providing substantiated evidence. A promising strategy to mitigate this issue is the deployment of Digital Product Passports (DPPs) designed to provide standardized, verifiable product information to stakeholders throughout the product lifecycle. Globally, multiple DPP initiatives are evolving, each reflecting distinct objectives, governance models, and technological architectures. This paper presents a comparative analysis of two major initiatives: the United Nations Transparency Protocol (UNTP) and its UNTP DPP, and the European Union (EU)EUDPP. Through a case study of a UNTP DPP for a computer incorporating critical raw materials - particularly a neodymium magnet - the paper illustrates the practical implementation and benefits of value-chain transparency. The case study is approached from a manufacturer-centric perspective, while also offering a conceptual outlook on the broader implications for value ecosystems within value-driven transparency frameworks. The findings contribute to the understanding of how DPPs can enhance supply chain accountability and support the transition to a circular economy., The authors would like to thank the European Union for funding this work, which is part of the project ‘NEO-CYCLE’ under Grant No.101138058.This work was partially funded by the Spanish State Research Agency, AEI, g.a.PID2023-146066OB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Decentralised search and discovery of digital product passports for circular ICT goods

  • Cano Esteban, Javier|||0009-0009-6642-6526
  • Vilchez Blanco, Pedro
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
The Digital Product Passport (DPP) is an emergent information system that will support conducting circular economy practices with information about a product’s hardware changes along its lifecycle. Diverse circular economy actors will add and use information to a product’s DPP. Actors include product manufacturers, and we explore how value chain operators, including repairers, refurbishers, and recyclers, can also update it, keeping updated product hardware information available to end users. This paper focuses on a distributed search and lookup service for DPPs. We have designed and prototyped this distributed search service within a DPP system for circular ICT goods. We show that the search service allows end users to find DPPs and validate the obtained information and actors involved in terms of integrity and authenticity. Our prototype is built with a set of microservices, where a verifiable data registry implemented with a DLT provides a shared source of truth and chain of trust for the different events and actors that modify the DPP information of a product item during the product’s lifetime., This work has been funded by the HORIZON-RIA Next Generation Internet Discovery and Search project (g.a. 101069364), and the Horizon Europe NEO-CYCLE project (g.a. 101138058), and the Spanish Ministerio de Ciencia Innovación y Universidades (g.a. PID2023-146066OB-I00, AEI 2023 Knowledge Generation Projects), and the Generalitat de Catalunya (g.a. 2021-SGR-01059)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A two-board design for interconnected intelligence in tiny IoT

  • Llisterri i Giménez, Nil|||0000-0003-1896-2868
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
  • Selimi, Mennan
Machine learning is nowadays used in tiny micro-controller boards, sometimes called TinyML. At the same time, LoRa Internet of Things (IoT) communication technology can now provide LoRa mesh network topologies that interconnect remote IoT devices. Both tendencies, however, have not converged yet to combine the potential of both. In this paper, we argue for a solution consisting of a two-board design as an architecture for interconnected ML-enabled IoT nodes in a LoRa mesh network. A prototype of the architecture using the TTGO LoRa32 board as a network device and the Arduino Portenta H7 as an application device is implemented as a case study to show the feasibility. We analyze a federated learning protocol design to illustrate how distributed applications can interact within the proposed two-board node architecture. We position the architecture with regard to several performance aspects and observe that the design delivers a separation of concerns by one board hosting the ML-application and the other providing an advanced network service to the application., This work was funded by the Spanish State Research Agency grant PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects), the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Demonstration of a digital product passport system for second-hand electronic devices

  • Vilchez Blanco, Pedro
  • Cano Esteban, Javier|||0009-0009-6642-6526
  • Puigdefabregas, Cayo
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
The foundation for the Digital Product Passport (DPP) was presented in the recent European Ecodesign for Sustainable Products Regulation (ESPR) in July 2024. DPP systems will provide ICT support to increase the circular economy of products significantly. With the DPP, a significant step forward will be taken by providing comprehensive, trusted, and publicly accessible product information for items or batches regarding digital records. Currently, the DPP building is undergoing a standardization process. Nevertheless, commercial players are preparing DPP systems but mainly with a proprietary implementation, making it difficult for researchers to experiment. In this demo paper, we will show an open-source implementation of a DPP system for managing the lifecycle of second-hand electronic devices such as computers. Our system is oriented towards the use cases of economic actors such as repairers, refurbishers, and the customers of these devices. Our system integrates a blockchain-based registry for the actors to trust the data and operations. The implementation of the demo DPP system is publicly available and can be deployed as a set of microservices., This work was partially supported by the Spanish Ministerio de Ciencia Innovación y Universidades (g.a. PID2023-146066OB-I00, AEI 2023 Knowledge Generation Projects) and the Horizon Europe NEO-CYCLE project (g.a. 101138058)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A system for monitoring and querying LoRa mesh network nodes

  • Griffiths, Jack
  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
  • Selimi, Mennan
LoRa mesh networks have recently gained an increasing interest to extend traditional LoRaWAN-based IoT applications. The mesh technology introduces the capacity of multi-hop and node-to-node communication in LoRa networks. This more sophisticated network service delivered by LoRa mesh networks compared to LoRaWAN raises the need for network management, to understand the situation of the different nodes that operate as routers and hosts of applications. In this paper, we present a monitoring solution for a LoRa mesh network that not only passively collects data about the nodes for visualization, but also allows Internet services to actively send queries to any network node to ask for its values. We show a proof of feasibility of the monitoring system with the deployment of real IoT boards and operational services., This work was funded by the Spanish State Research Agency grant PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects), the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

LoRaMesher: An open-source library for multi-hop LoRa mesh networks

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Baig Viñas, Roger|||0000-0001-9813-7678
LoRaMesher is an open-source C++ library that enables multi-hop mesh networks over LoRa communication on ESP32 microcontroller boards. The library implements a proactive distance-vector routing protocol that maintains routing tables on each node and provides unicast, broadcast, and reliable message delivery, including fragmentation and reassembly for large payloads. LoRaMesher leverages RadioLib for radio access and FreeRTOS for task scheduling, and integrates with PlatformIO for development. By allowing LoRa devices to communicate directly in a mesh network, rather than via LoRaWAN gateways, the library enables fully distributed applications on low-power IoT nodes. This paper describes the LoRaMesher software, its architecture, main functionalities, and usage examples, and discusses its relevance for research and applied IoT deployments., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under projects PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects and PDC2023-145809-I0 AEI 2023 Knowledge Generation Projects, financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Next-generation wireless backhaul design for rural areas

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Maccari, Leonardo
Rural areas often face significant challenges in accessing reliable broadband Internet due to high infrastructure costs and low population density. To address this issue, we propose a model for evaluating the performance and the cost of a mesh-based, last- and middle-mile replacement for broadband connection in these underserved regions. We use open data from ten underserved municipalities to assess the demand, plan the mesh network, and estimate the allocated capacity per user. We consider two designs: a low-cost network using the classical 5 GHz unlicensed band, and a high-performance one using mmWave frequency. For both designs, we estimate the Operating Expenditure and the amortized Capital Expenditure using realistic device prices and operating cost estimations. We compare the price of the mesh-based solution with alternatives based on xDSL and satellite connectivity and show that it has competitive prices compared to existing offers, covering a larger portion of households than DSL. We open-source both the code and the elaborated data to reproduce, extend, and improve our results in different settings., Partially funded by the Spanish grants PDC2023- 145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reliability analysis of wireless backhaul for rural wireless ISP

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Maccari, Leonardo
In this paper, we propose a model to improve the reliability of a mesh-based last-mile replacement for broadband connectivity in rural and underserved areas. Using open data from ten such regions, we analyze representative demand scenarios and focus on enhancing the robustness of the corresponding wireless backhaul design. We introduce graph-partitioning methodologies to construct mesh clusters with multiple gateways and increased vertex-connectivity, ensuring stronger resilience to radio and node failures. To capture the stochastic behavior of device outages, we model radio failures through a Markov-chain formulation and derive metrics such as failure probability and expected time to disconnection. Through numerical evaluation, we show that incorporating multi-gateway structures and reliabilityaware topology constraints can significantly improve the resilience of rural mesh networks with only modest additional infrastructure requirements., Partially funded by the Spanish grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OBI00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large and reliable data transfer service for LoRa mesh network applications

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Baig Viñas, Roger|||0000-0001-9813-7678
Recently, LoRa mesh networks have appeared as a communication technology for Internet of Things (IoT) devices. Through node-to-node communication, novel distributed IoT applications that extend beyond the capabilities of the LoRaWAN architecture can be enabled. However, current technologies for LoRa networks do not provide mechanisms for large and reliable data transfers between IoT nodes. This paper presents a service for such data transfers in LoRa mesh network applications, along with the protocol and formats used for inter-node communication. We explain the design choices and detail the implementation decisions to ensure that this service is practically usable. To this end, the service was integrated into the LoRaMesher library and is available as an open-source operational implementation. In experiments with ten real nodes and two network topologies, we observe that the service effectively achieves a large and reliable message delivery in an environment of concurrent transmissions and packet losses. In contrast, the cost of reliability for large data transfers is an increased number of messages and a higher delivery time. With the integration of the service into the LoRaMesher technology, developers now have a library that provides a reliable and large payload service for LoRa mesh network applications, eliminating the need to develop such capacity as a specific application-level solution., This work was funded by the Spanish Ministerio de Ciencia, Innovación Universidades through the grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects) MICIU/AEI/10.13039/501100011033/; the Recovery and Resilience Mechanism of the European Union; and by the European Union NextGenerationEU; and the Generalitat de Catalunya, Spain through the grants 2021-SGR-01059; and the Universitat Politècnica de Catalunya, Spain through the grant ALECTORS 0BV05-1. The authors gratefully acknowledge the insightful comments and constructive feedback provided by the anonymous reviewers., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Demonstration of concurrent application provision with LoRaMesher

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
  • Selimi, Mennan
There is an increasing interest in extending traditional LoRaWAN-based IoT applications by LoRa mesh networks. The mesh technology introduces the capacity for multi-hop and node-to-node communication and new opportunities for IoT applications. This demonstration showcases the LoRaMesher library, which enables the concurrently provisioning of multiple applications within a LoRa mesh network. The paper demon-strates the library operating with real IoT boards. This includes showing the self-configuring of the nodes to build the LoRa mesh networks. Then, we will run concurrent applications to demonstrate to the audience the different communication patterns of distributed applications within a LoRa mesh network. Finally, we will review how the LoRaMesher library can be used. The implementation of LoRaMesher is open source., This work received support from the Spanish AEI (State Research Agency) by grant PDC2023-145809-I00/AEI/10.13039/501100011033, and by grant PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects), being supported by the European Union NextGenerationEU, EU Recovery and Resilience Mechanism., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the impacts of computer reuse for digital inclusion from product information

  • Roura Salietti, Mireya
  • Navarro Moldes, Leandro
  • Meseguer Pallarès, Roc
  • Giménez, Sergio
Computer reuse is promoted as a strategy to reduce environmental impact, create local employment, and provide digital access. However, the development of sustainability indicators to inform policy has remained limited. This is due to the lack of empirical data on device lifespans and regional context, which forces Life Cycle Assessment (LCA) practitioners to rely on generic assumptions that limit the accuracy of impact estimations. This study addressed these gaps by developing an LCA-based calculation criterion designed to integrate multiple parameters using device-level data. The criterion is specifically tailored to provisioning scenarios targeting digitally excluded communities and was partially applied using a Dataset and lifespans of 710 refurbished devices from the eReuse initiative in Spain. Three provisioning scenarios (single user, two users with reuse, two users with new devices) were evaluated for Spain and extrapolated to South Africa and Sweden with contrasting electricity mixes to quantify the influence of energy in use. Reuse proved more advantageous than supplying new devices in terms of GWP per hour of digital access, and a one-at-a-time sensitivity analysis showed that the magnitude of this benefit is highly sensitive to device lifespans and electricity emission factors. Future integration of digital product information into LCA is expected to enhance the precision of sustainability indicators used to inform policy., We are grateful to all organisations and community initiatives from eReuse for their time and insights, particularly to David Franquesa and In`edit. This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under project PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU, and by the Department of Research and Universities of the Generalitat de Catalunya under project 2024 IMPAC 00065. The NGI DLT4EU and NGI Policy provided additional support in Practice projects, the Subtract project (Interreg Europe), the Association for Progressive Communications (APC), the Catalan Waste Agency, the Centre for Development Cooperation at Universitat Polit`ecnica de Catalunya, and the Barcelona City Council., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Decentralised search and discovery of digital product passports for circular ICT goods

  • Cano Esteban, Javier
  • Vilchez Blanco, Pedro
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
The Digital Product Passport (DPP) is an emergent information system that will support conducting circular economy practices with information about a product’s hardware changes along its lifecycle. Diverse circular economy actors will add and use information to a product’s DPP. Actors include product manufacturers, and we explore how value chain operators, including repairers, refurbishers, and recyclers, can also update it, keeping updated product hardware information available to end users. This paper focuses on a distributed search and lookup service for DPPs. We have designed and prototyped this distributed search service within a DPP system for circular ICT goods. We show that the search service allows end users to find DPPs and validate the obtained information and actors involved in terms of integrity and authenticity. Our prototype is built with a set of microservices, where a verifiable data registry implemented with a DLT provides a shared source of truth and chain of trust for the different events and actors that modify the DPP information of a product item during the product’s lifetime., This work has been funded by the HORIZON-RIA Next Generation Internet Discovery and Search project (g.a. 101069364), and the Horizon Europe NEO-CYCLE project (g.a. 101138058), and the Spanish Ministerio de Ciencia Innovación y Universidades (g.a. PID2023-146066OB-I00, AEI 2023 Knowledge Generation Projects), and the Generalitat de Catalunya (g.a. 2021-SGR-01059)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Middleware for distributed applications in a LoRa mesh network

  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Pueyo Centelles, Roger
  • Meseguer Pallarès, Roc
  • Baig Viñas, Roger
Recently, LoRa mesh networks have gained increasing interest as a communication layer for sending data between IoT nodes. However, the network service of the firmware on the microcontroller-based nodes is typically limited to sending and receiving LoRa packets through the LoRa radio. Therefore, the packet processing by the node has to be done using an application-specific implementation. In this article, we present the design and implementation of a middleware that facilitates the development and operation of multiple distributed applications on LoRa mesh network nodes. The components we propose leverage the routing capacity of a LoRa mesh network enabled by the LoRaMesher library and provide a service for applications to send and receive messages from each other. Running several applications concurrently is also supported. We experiment with the middleware implemented in the node firmware with distributed applications that span from the LoRa mesh network to the Internet over MQTT. Our results show the support of bidirectional application-level communication, which can be used to build cross-network distributed applications that integrate services on LoRa mesh network nodes., This work was funded by the Spanish Ministerio de Ciencia Innovación y Universidades through the grant PDC2023-145809-I00/AEI/10.13039/501100011033; and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects); the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU; the Generalitat de Catalunya through the grant 2021-SGR01059., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large and reliable data transfer service for LoRa mesh network applications

  • Miquel Solé, Joan
  • Pueyo Centelles, Roger
  • Freitag, Fèlix
  • Meseguer Pallarès, Roc
  • Baig Viñas, Roger
Recently, LoRa mesh networks have appeared as a communication technology for Internet of Things (IoT) devices. Through node-to-node communication, novel distributed IoT applications that extend beyond the capabilities of the LoRaWAN architecture can be enabled. However, current technologies for LoRa networks do not provide mechanisms for large and reliable data transfers between IoT nodes. This paper presents a service for such data transfers in LoRa mesh network applications, along with the protocol and formats used for inter-node communication. We explain the design choices and detail the implementation decisions to ensure that this service is practically usable. To this end, the service was integrated into the LoRaMesher library and is available as an open-source operational implementation. In experiments with ten real nodes and two network topologies, we observe that the service effectively achieves a large and reliable message delivery in an environment of concurrent transmissions and packet losses. In contrast, the cost of reliability for large data transfers is an increased number of messages and a higher delivery time. With the integration of the service into the LoRaMesher technology, developers now have a library that provides a reliable and large payload service for LoRa mesh network applications, eliminating the need to develop such capacity as a specific application-level solution., This work was funded by the Spanish Ministerio de Ciencia, Innovación Universidades through the grants PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects) MICIU/AEI/10.13039/501100011033/; the Recovery and Resilience Mechanism of the European Union; and by the European Union NextGenerationEU; and the Generalitat de Catalunya, Spain through the grants 2021-SGR-01059; and the Universitat Politècnica de Catalunya, Spain through the grant ALECTORS 0BV05-1. The authors gratefully acknowledge the insightful comments and constructive feedback provided by the anonymous reviewers., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Next-generation wireless backhaul design for rural areas

  • Gemmi, Gabriele
  • Cerdà Alabern, Llorenç
  • Maccari, Leonardo
Rural areas often face significant challenges in accessing reliable broadband Internet due to high infrastructure costs and low population density. To address this issue, we propose a model for evaluating the performance and the cost of a mesh-based, last- and middle-mile replacement for broadband connection in these underserved regions. We use open data from ten underserved municipalities to assess the demand, plan the mesh network, and estimate the allocated capacity per user. We consider two designs: a low-cost network using the classical 5 GHz unlicensed band, and a high-performance one using mmWave frequency. For both designs, we estimate the Operating Expenditure and the amortized Capital Expenditure using realistic device prices and operating cost estimations. We compare the price of the mesh-based solution with alternatives based on xDSL and satellite connectivity and show that it has competitive prices compared to existing offers, covering a larger portion of households than DSL. We open-source both the code and the elaborated data to reproduce, extend, and improve our results in different settings., Partially funded by the Spanish grants PDC2023- 145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00, and Generalitat de Catalunya through 2021-SGR-01059., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Demonstration of concurrent application provision with LoRaMesher

  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
  • Selimi, Mennan
There is an increasing interest in extending traditional LoRaWAN-based IoT applications by LoRa mesh networks. The mesh technology introduces the capacity for multi-hop and node-to-node communication and new opportunities for IoT applications. This demonstration showcases the LoRaMesher library, which enables the concurrently provisioning of multiple applications within a LoRa mesh network. The paper demon-strates the library operating with real IoT boards. This includes showing the self-configuring of the nodes to build the LoRa mesh networks. Then, we will run concurrent applications to demonstrate to the audience the different communication patterns of distributed applications within a LoRa mesh network. Finally, we will review how the LoRaMesher library can be used. The implementation of LoRaMesher is open source., This work received support from the Spanish AEI (State Research Agency) by grant PDC2023-145809-I00/AEI/10.13039/501100011033, and by grant PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects), being supported by the European Union NextGenerationEU, EU Recovery and Resilience Mechanism., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A two-board design for interconnected intelligence in tiny IoT

  • Llisterri i Giménez, Nil
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
  • Selimi, Mennan
Machine learning is nowadays used in tiny micro-controller boards, sometimes called TinyML. At the same time, LoRa Internet of Things (IoT) communication technology can now provide LoRa mesh network topologies that interconnect remote IoT devices. Both tendencies, however, have not converged yet to combine the potential of both. In this paper, we argue for a solution consisting of a two-board design as an architecture for interconnected ML-enabled IoT nodes in a LoRa mesh network. A prototype of the architecture using the TTGO LoRa32 board as a network device and the Arduino Portenta H7 as an application device is implemented as a case study to show the feasibility. We analyze a federated learning protocol design to illustrate how distributed applications can interact within the proposed two-board node architecture. We position the architecture with regard to several performance aspects and observe that the design delivers a separation of concerns by one board hosting the ML-application and the other providing an advanced network service to the application., This work was funded by the Spanish State Research Agency grant PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects), the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LoRaMesher: An open-source library for multi-hop LoRa mesh networks

  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Baig Viñas, Roger
LoRaMesher is an open-source C++ library that enables multi-hop mesh networks over LoRa communication on ESP32 microcontroller boards. The library implements a proactive distance-vector routing protocol that maintains routing tables on each node and provides unicast, broadcast, and reliable message delivery, including fragmentation and reassembly for large payloads. LoRaMesher leverages RadioLib for radio access and FreeRTOS for task scheduling, and integrates with PlatformIO for development. By allowing LoRa devices to communicate directly in a mesh network, rather than via LoRaWAN gateways, the library enables fully distributed applications on low-power IoT nodes. This paper describes the LoRaMesher software, its architecture, main functionalities, and usage examples, and discusses its relevance for research and applied IoT deployments., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under projects PID2023-146066OB-I00 AEI 2023 Knowledge Generation Projects and PDC2023-145809-I0 AEI 2023 Knowledge Generation Projects, financed by MICIU/AEI/10.13039/501100011033/ and by FEDER, EU., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Demonstration of a digital product passport system for second-hand electronic devices

  • Vilchez Blanco, Pedro
  • Cano Esteban, Javier
  • Puigdefabregas, Cayo
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
The foundation for the Digital Product Passport (DPP) was presented in the recent European Ecodesign for Sustainable Products Regulation (ESPR) in July 2024. DPP systems will provide ICT support to increase the circular economy of products significantly. With the DPP, a significant step forward will be taken by providing comprehensive, trusted, and publicly accessible product information for items or batches regarding digital records. Currently, the DPP building is undergoing a standardization process. Nevertheless, commercial players are preparing DPP systems but mainly with a proprietary implementation, making it difficult for researchers to experiment. In this demo paper, we will show an open-source implementation of a DPP system for managing the lifecycle of second-hand electronic devices such as computers. Our system is oriented towards the use cases of economic actors such as repairers, refurbishers, and the customers of these devices. Our system integrates a blockchain-based registry for the actors to trust the data and operations. The implementation of the demo DPP system is publicly available and can be deployed as a set of microservices., This work was partially supported by the Spanish Ministerio de Ciencia Innovación y Universidades (g.a. PID2023-146066OB-I00, AEI 2023 Knowledge Generation Projects) and the Horizon Europe NEO-CYCLE project (g.a. 101138058)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A system for monitoring and querying LoRa mesh network nodes

  • Griffiths, Jack
  • Miquel Solé, Joan
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
  • Selimi, Mennan
LoRa mesh networks have recently gained an increasing interest to extend traditional LoRaWAN-based IoT applications. The mesh technology introduces the capacity of multi-hop and node-to-node communication in LoRa networks. This more sophisticated network service delivered by LoRa mesh networks compared to LoRaWAN raises the need for network management, to understand the situation of the different nodes that operate as routers and hosts of applications. In this paper, we present a monitoring solution for a LoRa mesh network that not only passively collects data about the nodes for visualization, but also allows Internet services to actively send queries to any network node to ask for its values. We show a proof of feasibility of the monitoring system with the deployment of real IoT boards and operational services., This work was funded by the Spanish State Research Agency grant PDC2023-145809-I00/AEI/10.13039/501100011033 and PID2023-146066OB-I00 (AEI 2023 Knowledge Generation Projects), the Recovery and Resilience Mechanism of the European Union, and by the European Union NextGenerationEU., Peer Reviewed, Postprint (author's final draft)