Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Revisiting the redox transitions of Polyaniline. Semiquantitative interpretation of electrochemically induced IR bands

  • Huerta, Francisco|||0000-0002-9791-0355
  • Quijada, César|||0000-0002-9965-9651
  • Montilla, F.
  • Morallón, E.
[EN] The redox transitions of PANI in acidic medium have been monitored by a combination of cyclic voltammetry, in situ conductance and in situ FTIR spectroscopy. The results of the semiquantitative analysis strongly suggest that the classical tetrameric model of PANI does not satisfactorily describe the actual structures of the polymer at different redox states. An octameric model is revisited, with the inclusion of essential resonant structures, to provide an appropriate prediction of the relative IR intensity changes of the aromatic Csingle bondC stretching (at around 1520 cm¿1) and the quinoid Cdouble bondC stretching (at around 1590 cm¿1) vibrations observed by FTIR, which are difficult to interpret by considering only 4 aniline rings. Particularly, it is found that the emeraldine state is better described as a resonance hybrid of the classical bipolaronic and semiquinoid (polaron lattice) structures, while most of the charge transferred at the onset of the second voltammetric peak comes from the additional oxidation of this hybrid, which becomes unstable in the electrochemical environment producing mineralization to CO2 and release of soluble quinones., This work was financed by the Spanish Ministerio de Ciencia e Innovacion (project PID2019-105923RB-I00) and by Generalitat Valenciana (Conselleria de Educacion, Investigacion, Cultura y Deporte through project PROMETEO/2018/087). The authors of this work are deeply grateful to Prof. Jose Luis Vazquez Pico (Pepe, nowadays retired) for his mentorship, which was the seed to develop this work. We appreciate the wise advice he gave us during our careers which served us to deepen the science contained in this article, as well as for the friendship with which he honored us over the years.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manganese oxides/LaMnO3 perovskite materials and their application in the oxygen reduction reaction

  • Flores-Lasluisa, Jhony X.
  • Cazorla-Amorós, D.
  • Morallón, E.
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] Manganese-based materials can catalyze the oxygen reduction reaction (ORR), although their activity is known to depend on the crystalline phases and on the concentration of surface-active species. In the present study, we have optimized these two parameters to obtain improved catalysts for ORR. A sol-gel method was used to synthesize LaMnO3-manganese oxides composites with different lanthanum-to- manganese atomic ratios. The synthesized materials, which can be described as La1-xMnOz, were tested under ORR conditions and characterized by several physicochemical techniques such as SEM, XPS, EDX or XRD. It was found that the concentration of lanthanum governs the formation of different crystal phases and determines the crystallite size. Besides, high values of x tend to increase the surface concentration of manganese and therefore to produce more active sites for ORR. Among the materials analysed, La0.6MnOz mixed with carbon black (Vulcan) showed the best electrocatalytic performance. The high tolerance to methanol makes this electrocatalyst a promising alternative to substitute Pt-based materials in alkaline electrolytes., The authors thank to the Ministerio de Ciencia e Innovacion (PID2019-105923RB-I00) for financial support. J.X.F.-L. gratefully acknowledges MINECO for financial support through an FPI contract (BES-2017-081598).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamics and coherence of photoexcited states in polyfluorene films with ordered chain phases

  • Quintero-Jaime, Andrés Felipe
  • Hafed-Khatiri, Salma
  • Montilla, Francisco
  • Huerta, Francisco|||0000-0002-9791-0355
  • Quijada, César|||0000-0002-9965-9651
[EN] Understanding the optical and electronic excitations in conjugated polymers, their delocalization, and dynamics is of paramount importance for improving the performance of optoelectronic devices. The structure of a conjugated polymer in the solid state, the presence of ordered domains, and conformational subunits strongly affect the exciton and polaron interactions. The effect of the crystalline structure of polyfluorene films on exciton dynamics was studied using a combination of electrochemical and spectroscopic methods. Optoelectronic alterations caused by the p-doping process strongly suggest that the electrochemical charge injection occurs mainly in the more ordered beta-phase. Evidence for the presence of either alpha- or beta-phase is supported by the different behavior of the fluorescence quenching at increasing doping levels (the quenching elements appear more homogeneously distributed in the alpha-PFO phase). Estimated singlet exciton coherence lengths indicate that it delocalizes over 20 repeat units in the alpha-PFO phase, but it extends only over 14 units for beta-PFO., The authors would like to thank Spanish Ministerio de Ciencia e Innovacion (projects PID2019-105923RB-I00, PDC2021-120884-I00, European Union NextGenerationEU PRTR-C17.I1) and Generalitat Valenciana (project GVA-THINKINAZUL/2021/015 and PROMETEO/2018/087) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of exciton diffusion coefficient in cojnjugated polymer films: Novel methods based on spectroelectrochemical techniques

  • Montilla, Francisco
  • Quintero-Jaime, Andres F.
  • Huerta, Francisco|||0000-0002-9791-0355
  • Quijada, César|||0000-0002-9965-9651
[EN] The understanding of exciton dynamics is a central issue in the operation of conjugated polymer-based optoelectronic devices, like solar cells, light-emitting diodes or electrochemiluminescent cells. In this work, we explore the applicability of combined in situ electrochemical fluorescence and UV-vis spectroscopies for the study of electrochemically induced quenching of photoluminescence as novel tools for the determination of exciton diffusion in a model conjugated polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylvynilene] (MEH-PPV). It is demonstrated that the quenching process observed upon electrochemical doping follows a linear Stern-Volmer mechanism at low doping levels, with a time-independent rate constant typical of diffusion-controlled annihilation processes. From the Stern-Volmer rate constant and the exciton-polaron critical distance, an exciton diffusion coefficient is derived whose value is in close agreement with those reported in the literature. These results support the suitability of these spectroelectrochemical techniques as fast and powerful alternative tools for the reliable determination of exciton diffusion coefficients in conjugated polymers., This work was supported by Generalitat Valenciana (Conselleria de Educacion, Investigacion, Cultura y Deporte) project PROMETEO/2018/087 and Spanish Ministerio de Ciencia e Innovacion (project PID2019105923RBI00)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LaNi1-xCoxO3 perovskites for application in electrochemical reactions involving molecular oxygen

  • Flores-Lasluisa, J.X.
  • Cazorla-Amorós, Diego
  • Morallón, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] LaNi1-xCoxO3 perovskite materials were synthesized by a sol-gel method for use in electrochemical reactions which involve molecular oxygen. The metal oxides were characterized by different physicochemical techniques and it was observed that the incorporation of Co induces some changes in the surface of the materials that affect the electrocatalytic activity. The different perovskite metal oxides were mixed with carbon black (Vulcan) to improve their electrocatalytic performance. The results from TPR and TPD techniques supported the XPS interpretation suggesting that a stronger interaction between carbon material and metal oxides can be obtained by physically mixing the two materials. This interaction improves the electron transfer and enhances the catalytic activity. Among the as-prepared materials, it was observed that the electrocatalytic performance of LaNi1-xCoxO3 perovskite/Vulcan materials is higher than that of LaNiO3/Vulcan for ORR, but similar towards OER. It is claimed that Co3+ is more catalytic for ORR, while Ni3+ favors the OER. Moreover, the presence of Co stimulates the formation of chemisorbed oxygen species, which also favor the electron transfer. Metal oxides containing both cations show higher stability, being this effect more notorious for OER. LaNi0.5Co0.5O3/Vulcan seems a suitable bifunctional catalyst for both electrochemical reactions., The authors would like to thank PID2019-105923RB-I00 project funded by MCIN/AEI/10.13039. J.X.F.-L. gratefully acknowledges MINECO for financial support through an FPI contract (BES-2017- 081598)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

  • Flores-Lasluisa, J. X.
  • Cazorla-Amoros, D.
  • Morallón, E.
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evo-lution reactions (HER). Perovskite (ABO3) and spinel (AB2O4) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the elec-trocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, eg orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and gra-phene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion., The authors thank to the Ministerio de Ciencia e Innovacion/AEI (PID 2019-105923RB-I00) for financial support. J.X.F.-L. gratefully acknowledges MINECO for financial support through an FPI contract (BES- 2017-081598).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon Material and Cobalt-Substitution Effects in the Electrochemical Behavior of LaMnO3 for ORR and OER

  • Flores-Lasluisa, Jhony X.
  • Cazorla-Amorós, Diego
  • Morallon, Emilia
  • Huerta, Francisco|||0000-0002-9791-0355
[EN] LaMn1-xCoxO3 perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials' electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn's different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon-oxygen-metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER., This research was funded by Ministerio de Ciencia e Innovacion (Grant number: PID2019-105923RB-100) and (grant number: BES-2017-081598). And the APC was funded by Universidad de Alicante.