Pasar al contenido principal

DISEÑO DE HORMIGON MAS SOSTENIBLE PARA IMPRESION 3D BASADO EN LA REOLOGIA Y EL CONTROL DE PROPIEDADES A MUY CORTAS EDADES

PID2020-115433RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effect of aggregate content and fibre type on the rheological behaviour and structural build-up of fibre reinforced self-compacting concrete using two binder compositions

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Seara Paz, Sindy
[Abstract:] Many parameters influence the fresh behaviour of fibre reinforced self-compacting concrete (FRSCC), such as length, aspect ratio, fibre content, solid volume fraction, and particle interaction. Most studies did not analyse rheological behaviour (just workability) and they are focused on paste or mortar. However, the analysis at the concrete level is also required to confirm the behaviour when the coarse aggregates and fibres are employed. This kind of analysis is scarce in the literature. Hence, this work aims to increase the knowledge about the effect of aggregate content and fibre type on FRSCC. To do so, the behaviour of self-compacting mixes with three different aggregate contents (550, 500, and 650 l/m3), two cementitious systems (100 % cement, and 60 % cement, 25 % limestone filler and 15 % metakaolin), and three different types of rigid fibres (two metallic and one polypropylene) were analysed. To characterise the concrete rheological performance, the stress growth test (SGT) was selected to avoid any fibre orientation. SGT was repeated twice under undisturbed and disturbed conditions to assess the structural build-up of the concrete. The results indicate that there is a critical value of the relative packing fraction that, once overcome, severely affects the fresh behaviour of FRSSC. This critical value can be calculated as the ratio between random loose packing fraction and dense packing fraction. It can be used to design a FRSCC mix guaranteeing that the fresh state remains in a suitable range where the hydrodynamic interactions dominate the behaviour and therefore, changes in the mix composition will not sharply modify the rheological performance of the concrete., This research was funded by the Spanish Ministerio de Ciencia e innovación - Agencia Estatal de investigación through three projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020–115433RB-I00”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- PDC2021–121660-I00” and "Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) - TED2021–129757B-I00"
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Assessment of Water Transport and Chemical Attack of Meta-Illite Calcined Clay Blended Cement in High-Performance Concrete

  • Nduka, David
  • Olawuyi, Babatunde James
  • Cantero, B.
  • González-Fonteboa, Belén
[Abstract:] Rapid urbanisation causes a rise in the need for infrastructure, which in turn fuels the creation of additional concrete and further increases cement supplies. Activation of illite-based clay mineral and usage in concrete production is one of the sustainable ways to address the cement industry anthropogenic issues. This study evaluates the durability properties of water transport (water absorption, and capillary water absorption), and resistance to aggressive environments (5% solutions of hydrochloric acid, HCl; sodium sulphate, Na2SO4; and calcium chloride, CaCl2) of meta-illite calcined clay (MCC)-based high-performance concrete (HPC). For this purpose, concrete was produced with 5, 10, 15, 20, 25 and 30% MCC content in partial substitution of CEM II. Results from the water absorption tests indicate an average percentage value of 3.57%, 3.35% and 2.52% for all the observed mixes at 28, 56 and 90 days, respectively, with MCCC-10 HPC having an average best value of 2.23% across the curing ages. On all observed days, the 5 to 15% cement replacements had very close average water sorptivity value of 0.125 ± 0.001 mm/min0.5 with the control mix (0.113 ± 0.011 mm/min0.5). The aggressive environments exposure findings of the hardened MCC-based HPC specimens of 10 to 20% recorded an approximately 15% compressive strength loss in HCl, Na2SO4 and CaCl2 solutions over the 90 days of curing. In all, the HPC mixes of 5 to 15% MCC content obtained an average durability performance factor of 89%. As a result, these findings imply that MCC can replace cement in up to 15% of HPC production., This research was funded by MINECO through two projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020-115433RB-I00” and “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- PDC2021-121660-I00”. We also thank the Spanish Ministry of Science and Innovation for the financial support through its postdoctoral fellowship to Juan de la Cierva (No FJC2021-047024-I).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Automated Control of the Fresh State of Industrial Concrete Behaviour by Rheometer Test Adjustment

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Carro-López, Diego
  • Martínez-Abella, Fernando
[Abstract:] This study aimed to develop a rheometer prototype and define a procedure for adjusting the automated control of the fresh state of concrete. Sixteen batches were produced, and their fresh behaviour was measured at different testing times by applying the Abrams cone and flow curve test (FCT) as the rheological protocol. During this test, the yield stress and plastic viscosity of the concretes were measured in relative units. The rheometer prototype was used to define a new protocol to select the most suitable rheometer impeller arrangement and optimal FCT configuration. This protocol considers the torque at the end of the breakdown period, torque reduction during the breakdown period, segregation, and negative values of the yield stress in relative units. This protocol also enabled an iterative adjustment procedure, facilitating the use of a rheometer for the automated control of the homogeneity and behaviour of fresh concrete, as well as real-time decision making., This research was funded by the Spanish Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación through three research projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)—PID2020-115433RB-I00”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)—PDC2021-121660-I00” and “Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete)—TED2021-129757B-I00”.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Genetic programming to understand the influence of new sustainable powder materials in the fresh performance of cement pastes

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Pérez Ordóñez, Juan Luis
  • Martínez-Abella, Fernando
[Abstract:] This study focused on pastes that incorporate metakaolin, biomass ash, and granite powder as supplementary cementitious materials to obtain specific expressions to predict rheological properties in pastes and to define the most appropriate dosage parameters using genetic programming. For this purpose, a dataset was developed following a central composite design, and some fresh properties were measured: Marsh cone and rheological properties, such as yield stress and plastic viscosity. The models generated by genetic programming presented robust statistical indices for the properties studied. The influence of supplementary cementitious materials on rheological properties was also analysed through a parametric analysis. After analysing the factors affecting paste rheology, it was concluded that the most important aspects affecting fresh behaviour were water demand and particle interaction, as well as the relation between both effects., This study is part of two projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020-115433RB-I00”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- PDC2021-121660-I00” and "Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) - TED2021-129757B–I00" funded by MINECO.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Parametric Analysis in Sustainable Self-Compacting Mortars Using Genetic Programming

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Pérez Ordóñez, Juan Luis
  • Martínez-Abella, Fernando
[Abstract]: This study addresses the capabilities of genetic programming to predict the behaviour of cement-based mixtures by focusing on the influence of quaternary binders (incorporating metakaolin, biomass ash and granite powder as novel powder materials) on the rheological properties of self-compacting mixtures, including spread diameter in mini-cone test and time to flow in mini-funnel test. Using a previous dataset, GP techniques are applied to obtain predicted models and to compare them with those developed throughout analysis of variance. The results demonstrate that the equations obtained by the GP technique showed the best statistical indices for the analysed properties. Afterwards, a parametric analysis was performed to analyse the influence of the composition of quaternary binders on the fresh behaviour of mortar mixtures. The parametric analysis indicated that changes in the binder composition that increased granite powder content damage the fresh behaviour of the mortars (the funnel time increases, and the spread diameter decreases), being this negative effect more significant when the water content is low, and especially noteworthy in the Tfunnel time. It is concluded that genetic programming and design of experiments are powerful tools that can be used to analyse the influence of new raw materials in different mortar properties., This study is part of two projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020-115433RB-I00” and “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)-PDC2021-121660-I00” funded by MINECO.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Rheology and Setting of Self-Compacting Concrete Incorporating High Volume of Fly Ash and Internal Curing via Coal and Wood Bottom Ash

  • Rodríguez-Álvaro, Roberto
  • Seara Paz, Sindy
  • Martínez-Abella, Fernando
  • González-Fonteboa, Belén
[Abstract]: The continuous development of innovative high performance concretes is encouraging the use of new and sophisticated techniques to study their performance. In this article, a rheometer is used to determine the rheological parameters (dynamic yield stress, viscosity, yield stress at rest and thixotropy) of an internally cured self-compacting concrete with fly ash blended cement. This research is motivated by the scarcity of rheological studies regarding internally cured concretes. Coal bottom ash (CBA) and wood bottom ash (WA) were used as internal curing water reservoirs. Air content, setting times and temperature rise under semi-adiabatic conditions were also analysed. The results indicate that ball bearing effect of fly ash decreased the amount of high range water reducer admixture added to the mortars to get similar workability. Furthermore, all the rheological parameters increased when using coal bottom ash and, more remarkably, wood ash, due to their irregular shape, rough texture and some minor water absorption. Internal curing of fly ash blended cement concrete has no detrimental effects on the fresh state properties, but special attention must be paid to the pre-wetting of porous aggregates. If the internal curing water reservoirs are wetted below their water absorption capacities, their use reduces workability and setting times. Therefore, the practicality of the proposed mixtures relay mainly on the care taken during their design and materials conditioning. The future research efforts should focus on the development of new mixes with different supplementary cementitious materials and new conditioning techniques that guarantee a precise pre-wetting., This work has been carried out with the framework of the project “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020-115433RB-I00” funded by the Ministry of Science and Innovation - (National Agency of Research – Agencia Estatal de Investigación, Spain). Funding for open access charge: Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effects of bacteria-based self-healing nutrients on hydration and rheology of cement pastes

  • Pinto, Adonay
  • González-Fonteboa, Belén
  • Seara Paz, Sindy
  • Martínez-Abella, Fernando
[Abstract:] Crack openings in concrete lead to a reduction in its lifespan. Many authors have analysed different techniques that could repair cracks autonomously, being the use of bacteria one of the most promising approaches. Bacteria are often introduced with nutrients in the concrete mixes, and they may alter the cement hydration. In this study, the effects that calcium lactate, calcium nitrate, and yeast extract have on cement pastes during the early hours of hydration were analysed. To accomplish this, calorimetry, in situ X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Vicat and rheology techniques were employed. The results demonstrated that the addition of calcium lactate led to higher values of ettringite, which altered the rheological behaviour of the pastes. Moreover, when added at 4%, calcium lactate also delayed the setting time by inhibiting the reaction of silicates, a similar effect was observed when yeast extract was added. Lastly, the incorporation of nitrate accelerated the setting time., This work has been carried out within the framework of the following projects: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- [PID2020-115433RB-I00]”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- [PDC2021-121660-I00]” and “Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) [TED2021-129757B-I00]” all funded by MINECO (Ministry of Economy, Industry and Competitiveness). In addition, the authors would like to thank the Xunta de Galicia (Spain) for the financial support through its pre-doctoral contracts program.