Pasar al contenido principal

CATALIZADORES PARA LA HIDROGENACION DE BIOCOMPUESTOS CON ACIDO FORMICO Y PARA LA VALORIZACION DE DIOXIDO DE CARBONO

PID2020-119160RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrids of reduced graphene oxide aerogel and CNT for electrochemical O2 reduction

  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
9 figures, 1 table.-- Supplementary material available., Carbon nanotubes (CNTs), graphene aerogels (GAs), and their hybrid (CNT-GA) prepared by hydrothermal treatment were tested in the electrocatalytic oxygen reduction reaction (ORR). The importance of porous structure derived from the combination of mesoporosity coming from CNTs with macroporosity stemming from GAs was evidenced because the hybrid carbon material exhibited synergistic performance in terms of kinetic current and onset potential. Different electrocatalysts were prepared based on these hybrids doped with nitrogen using different precursors and also supporting Fe nanoparticles. N-doped carbon hybrids showed higher electrocatalytic activity than their undoped counterparts. Nevertheless, both doped and undoped materials provided a mixed two and four electron reduction. On the other hand, the addition of a Fe precursor and phenanthroline to the CNT-GA allowed preparing an N-doped hybrid containing Fe nanoparticles which favored the 4-electron oxygen reduction to water, thus being an excellent candidate as a structured cathode in fuel cells., This research was funded by Spanish Ministry MICINN/AI under Projects PID2019-104272RB-C51/AEI/10.13039/501100011033, PID2020-119160RB-C21 and Gobierno de Aragon (Grupo reconocido DGA T03_20R,) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promotion of Ru or Ni on alumina catalysts with a basic metal for CO2 hydrogenation: Effect of the type of metal (Na, K, Ba)

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
10 figures, 1 table.-- Supplementary information available.-- This article belongs to the Special Issue State-of-the-Art Nanomaterials for Energy Storage/Conversion and Catalysis in Spain., Ru and Ni on alumina catalysts have been promoted with a 10 wt% of alkali metal (K or Na) or alkaline earth metal (Ba) and tested in CO2 methanation. For the catalyst consisting of Ni and Ba, the variation of Ba loading while keeping Ni loading constant was studied. The promotion in terms of enhanced CH4 yield was found only for the addition of barium to 15 wt% Ni/Al2O3. In contrast, K and Na addition increased the selectivity to CO while decreasing conversion. For the Ru-based catalyst series, no enhancement in conversion or CH4 yield was attained by any of the alkaline metals. CO2 temperature-programed desorption (CO2-TPD) revealed that the amount of chemisorbed CO2 increased significantly after the addition of the base metal. The reactivity of COx ad-species for each catalyst was assessed by temperature-programed surface reaction (TPSR). The characterization revealed that the performance in the Sabatier reaction was a result of the interplay between the amount of chemisorbed CO2 and the reactivity of the COx ad-species, which was maximized for the (10%Ba)15%Ni/Al2O3 catalyst., The Financial support from the Spanish Ministry MINECO (projects PID2020- 119160RB-C21 and -C22), Gobierno de Aragón (Grupo Reconocido DGA T03_20R), and associated EU Regional Development Funds are gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cyclic performance in CO2 capture-methanation of bifunctional Ru with different base metals: Effect of the reactivity of COx ad-species

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Moral Pombo, Jorge
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
9 figures.-- Supplementary information available., Bifunctional materials based on Ru nanoparticles and an alkaline metal (K, Na or Ba) have been scrutinized for several cycles of CO2 capture and subsequent methanation at different temperatures from 250 ºC to 450 ºC. The optimum performance in terms of stable cyclic operation, amount of captured CO2 and relevant methane productivity was attained at different temperature window for each material. For the materials here prepared, the limiting lower operation temperature of stable cyclic performance was determined by the methanation kinetics, which depended on reactivity of COx ad-species captured with each alkaline metal. The highest activity was found with Ba-containing materials, which exhibited a stable and relevant cyclic CH4 productivity at 250 ºC, being one of the lowest operation temperatures reported for a dual functional material to date. This material exhibited stable cyclic performance also in the presence of O2 and H2O, although the CH4 productivity decreases slightly and reversibly compared to that using CO2 containing gas free of O2 and H2O., The Financial support from Spanish Ministry MINECO (projects PID2020-119160RB-C21 and -C22), Gobierno de Aragón (Grupo Reconocido Gobierno de Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of temperature and presence of minor amount of metal on porous carbon materials derived from ZIF8 pyrolysis for electrocatalysis

  • Hernández-Ferrer, Javier
  • Gracia Martín, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
11 figures, 4 tables.-- Supplementary information available., ZIF8 without and with adsorption of minor amounts of Co precursor have been pyrolized at different temperatures studying systematically the effect of carbonization temperature on the texture, composition and ORR performance both in acidic and basic media. The increase of pyrolysis temperature diminished the N content but increased the graphitic character. The trade-off between these two parameters in metal-free electrocatalysts resulted in an improvement of ORR performance, which is met for the highest pyrolysis temperature of 1000 ºC. Moreover, the adsorption of minor amount of Co precursor enhanced further the ORR performance, increased the graphitic character and the porosity of the resulting carbon material. Morphologically, these carbon materials kept the polyhedral shape of ZIF8 and were covered by graphitic nanostructures devoid of metal nanoparticles. Co metal catalysed the growth of these graphitic nanostructures and concomitantly is stabilized as monoatomic Co-Nx-C species preventing the agglomeration as metal nanoparticles. Therefore, the need of an acid washing step is avoided, which is usually necessary in the carbonization of other metal containing MOFs., Grants PID2020-119160RB-C21 and PID2019-104272RB-C51 funded by MCIN/AEI/10.13039/501100011033 and Aragón Government (Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics of Pd subsurface hydride formation and their impact on the selectivity control for selective butadiene hydrogenation reaction

  • Asedegbega-Nieto, Esther
  • Iglesias Juez, Ana
  • di Michiel, Marco
  • Fernández, M.
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial hydrogenation reaction. In this study, we introduce some experimental evidence indicating that subsurface Pd hydride species are governing the reactivity of this reaction. In particular, we detect that the extent of formation/decomposition of PdHx species is very sensitive to the Pd nanoparticle aggregate dimensions, and this finally controls the selectivity in this process. The main and direct methodology applied to determine this reaction mechanism step is time-resolved high-energy X-ray diffraction (HEXRD)., The authors acknowledge financial support from Spanish Ministry MINECO (projects PID2020-119160RB-C21 and -C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual functional materials based on Ni and different alkaline metals on alumina for the cyclic stepwise CO2 capture and methanation

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
8 figures.-- Supplementary information available., Bimetallic catalysts consisting of nickel and one alkali or alkaline-earth metal (Na, K or Ba) on alumina support have been tested in the cyclic CO2 capture and subsequent methanation. The best performance was attained with a different material for cyclic tests (K-Ni/Al) than for Sabatier reaction (Ba-Ni/Al). In cyclic tests, the methane productivity shows different dependence with the temperature for each alkali and alkaline-earth metal. For temperature of 300 °C or above, the dual functional materials show stable cyclic performance when the capture is performed both from 5% CO2 in Ar and from simulated flue gas containing also O2 and H2O. Using the later feed, the CH4 productivity diminish reversibly compared to oxygen free conditions and nickel metal oxidises significantly. K-Ni/Al exhibited the best cyclic performance in terms of CH4 productivity and stability, which is associated to the highest reducibility of oxidised nickel species and the lowest formation of unreducible carbonates., The authors are very grateful to the Grants PID2020-119160RB-C21 and -C22 funded by MCIN/AEI/10.13039/501100011033 and Aragón Government (Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in process intensification of direct air CO2 capture with chemical conversion

  • García-Bordejé, José Enrique
  • Gonzalez-Olmos, R.
14 figures, 6 tables., Capturing CO2 from air (DAC) is becoming an attractive technological route to face the climate crisis. This paper reviews the existing research efforts to integrate DAC with conversion technologies to transform the captured CO2 into chemicals or fuels. The approach can potentially lead to net zero carbon emissions, thus being of interest in a circular economy framework. A growing amount of research has been devoted to the combination of DAC with CO2 conversion, leading to creative strategies which start to be scaled up. In this review, we have critically analysed the existing approaches by the degree of process integration. From the point of view of process intensification, the integration of both capture and reaction in the same vessel can potentially lead to equipment and energy cost savings besides other synergistic effects. In this vessel, the DAC and conversion can occur either in consecutive stages with change of feed or spontaneously in a cascade reaction without changing the conditions. As a side effect, the benefits entailed by process intensification in different levels of integration may be a decisive driving force for the widespread deployment of DAC. This paper discusses the ongoing research and perspectives to guide researchers in this promising new field., The authors acknowledge sincerely the funding of MCIN/AEI/10.13039/501100011033 (Grant PID2020-119160RB-C21) and Aragón Government (Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged. We also acknowledge the support by projects Opti-CCU (2022-DI-00053) and RFC+PU (2021 BP 00029) funded by the Catalan Government. GESPA group from IQS has been recognized as Consolidated Research Group by the Catalan Government (2021 SGR 00321)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalto atómicamente disperso en carbón poroso dopado con nitrógeno a partir de la cabonización de ZIF-8 para la ORR

  • Hernández-Ferrer, Javier
  • Gracia Martín, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura.- Abstract del póster de Tecnologías para la generación sostenible de energía presentada en la XVI Reunión del Grupo Español del Carbón (Reunión GEC 2023), celebrada en Gijón del 22 al 25 de octubre de 2023., La reducción electroquímica de oxigeno es una reacción de gran importancia para la transición energética ya que está en la base de las pilas de combustible y las baterías de aire. El reto que existe actualmente es aumentar la actividad másica a la vez que evitar o reducir el uso de metales nobles. Especies del tipo metal transición-N-C, que imitan ftalocianinas se han demostrado como una buena alternativa para obtener una alta actividad másica [1] [10]. Estas especias se podrían preparar por la carbonización controlada de MOFs ya que estos contienen tanto metales como nitrógenos atómicamente dispersos. Algunos trabajos pioneros carbonizaron ZIF-67 ) [16] or ZIF-8 [17] con metales. En estos trabajos se realizó un lavado ácido para eliminar las nanopartículas formadas, pero aun así quedaban nanopartículas encapsuladas reduciendo la actividad másica en la ORR. En este trabajo hemos carbonizado ZIF8 con y sin impregnación de 0.9 wt% Co y lo hemos carbonizado a tres temperaturas diferentes, 700 ºC, 900 ºC y 1000 ºC. Los carbones dopados con nitrógeno se han caracterizado exhaustivamente y se han probado en la ORR tanto en medio neutro como básico. De esa manera ha sido posible poner algo de luz el efecto de la temperatura de carbonización y en el efecto de la presencia de Co en las propiedades de los materiales carbonosos y en su comportamiento electrocatalítico en la ORR., Proyectos PID2020-119160RB-C21 y PID2019-104272RB-C51 financiados por gobierno de Aragón (Aragón T03_20R) y MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative approaches to sustainable ammonia synthesis under mild conditions

  • Castillejos-López, Eva
  • García-Bordejé, José Enrique
6 figures, 2 tables., Ammonia is one of the most important chemicals in the world because it is a feedstock for fertilizer production and, moreover, it has been proposed as a convenient storage media for renewable H2. Currently, it is produced by Haber-Bosch process, which entails harsh operation conditions and a high carbon footprint, rendering the process difficult to be run by renewable energy. Therefore, substituting the conventional Haber-Bosch process by other approach less energy-intensive and carbon-free is an urgent need. A milder process for ammonia synthesis will enable the implementation of smaller distributed plants more aligned with renewable energies. For this reason, there is a plethora of current research focusing on the development of suitable catalysts with higher activity and selectivity for nitrogen reduction and processes that will work under less severe operating conditions or even at ambient conditions. Some of the most relevant research approaches are here revised and compared., The Financial support from Spanish Investigation Agency (projects PID2020-119160RB−C21 and -C22), Gobierno de Aragón (Grupo Reconocido Gobierno de Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hidrogenación de CO2 mediante catalizadores basados en Ru sobre distintos soportes: efecto de la basicidad

  • Gracia Martín, Mario
  • García-Bordejé, José Enrique
1 figura.-- Póster presentado en la XVI REUNIÓN GEC 2023 en la sección Aplicaciones catalíticas, medioambientales y biosanitarias, Gijón (España), celebrada del 22 al 25 de octubre de 2023., Debido a que la energía de fuentes renovables se obtiene de manera fluctuante y descentralizada se hace necesario su almacenamiento y transporte. Por otro lado, una economía circular requiere la utilización de CO2 como materia prima. La conversión de energía renovable en H2 por electrolisis de agua y su posterior reacción con CO2 para producir CH4 permite abordar estos dos desafíos al mismo tiempo. Además, el CH4 sintético se puede almacenar y transportar usando las actuales infraestructuras, lo que no es posible con el H2 producido directamente por electrolisis del agua. La reacción entre CO2 con H2 se descubrió hace un siglo y se conoce con el nombre de la reacción de Sabatier [1]. Como catalizadores se han empleado principalmente Ni o Ru soportados en óxidos metálicos. En este trabajo se ha abordado la mejora de los catalizadores mediante usando diferentes soportes con distintas basicidades y mediante la preparación de catalizadores bimetálicos. Los catalizadores bimetálicos con la doble función de captura y conversión también se han ensayado en ciclos para la captura del CO2 de gases de combustión., Proyectos PID2020-119160RB-C21 financiados por MCIN/AEI/10.13039/501100011033 y gobierno de Aragón (Aragón T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactivity of n-butene using carbon supported Mo carbide and Ni, Mo, Co phosphides catalysts

  • Fernández-Morales, J.M.
  • Martínez Quintana, Laura
  • Dongil, Ana Belén
  • Asedegbega, E.
  • Castillejos, E.
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Conversion of 1-butene was studied over Mo carbides and Ni, Co and Mo phosphides, under continuous gas phase operating conditions at atmospheric pressure and 100 °C, using 1-butene/helium mixture in a molar ratio of 4:1. The conversion was in the range 30–44% and the values were quite stable except for (1:2)CoP, (1:2)NiP, (1:2)MoP-and MoxC supported catalysts. The main reaction was isomerization of 1-butene, and the selectivity to dimerization was observed in a higher ratio on (1:2)MoP and MoxC supported on high surface area graphite. In situ XRD, XPS, NH3-TPD and thermogravimetry (TG) have been used to assess for the formed species on the surface. © 2023 The Authors, Financial support from the Spanish Ministry MINECO (projects PID2020-119160RB-C21 and -C22) and RYC2020-030626-I and from Spanish National Research Council 20228AT002 is gratefully acknowledged., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formic Acid Dehydration Using Mechanochemically Prepared TiO2-Graphite Composites

  • Yruela-Garrido, Marta
  • Martín-Rodríguez, Nuria
  • Castillejos-López, Eva
  • Campos Castellanos, Eduardo
  • Conesa, José María
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Commercial high surface area graphite (HSAG300) and commercial TiO2 were used to produce composite materials through a simple mechanochemical method involving milling and ultrasonic treatments. The acid and basic sites exposed on the surfaces of these materials were characterized by temperature-programmed desorption (TPD) of ammonia and carbon dioxide. The catalytic materials were tested in the dehydration reaction of formic acid to produce hydrogen-free CO. While HSAG300 is practically inactive under reaction conditions (continuous gas flow at temperatures in the range of 100-250 ºC), all samples containing TiO2 are active, exhibiting high selectivity to CO without significant deactivation at moderate reaction temperatures. It is demonstrated that the presence of graphite in the catalysts enhances the specific catalytic activity of TiO2. Assuming that the dehydration reaction is catalyzed by acid sites on the TiO2 surfaces, a comparative evaluation of the surface sites reveals that the graphite-TiO2 interactions not only change the density of surface sites but also modify the strength of the acid centers of TiO2. In summary, the interaction of HSAG300 with TiO2 modulates the surface properties of the prepared composite catalysts, decreasing the total number of basic surface sites and increasing the strength of acidic sites compared to bare TiO2., Authors recognize financial support from Spanish Project grants PID2020-119160RB C21 and -C22 funded by MCIN/AEI, Peer reviewed