Pasar al contenido principal

CATALIZADORES PARA EL RECICLADO DE RESIDUOS DE CARBONO EN CICLOS PRODUCTIVOS A TRAVES DEL ACETILENO

PID2020-119160RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promotion of Ru or Ni on alumina catalysts with a basic metal for CO2 hydrogenation: Effect of the type of metal (Na, K, Ba)

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
10 figures, 1 table.-- Supplementary information available.-- This article belongs to the Special Issue State-of-the-Art Nanomaterials for Energy Storage/Conversion and Catalysis in Spain., Ru and Ni on alumina catalysts have been promoted with a 10 wt% of alkali metal (K or Na) or alkaline earth metal (Ba) and tested in CO2 methanation. For the catalyst consisting of Ni and Ba, the variation of Ba loading while keeping Ni loading constant was studied. The promotion in terms of enhanced CH4 yield was found only for the addition of barium to 15 wt% Ni/Al2O3. In contrast, K and Na addition increased the selectivity to CO while decreasing conversion. For the Ru-based catalyst series, no enhancement in conversion or CH4 yield was attained by any of the alkaline metals. CO2 temperature-programed desorption (CO2-TPD) revealed that the amount of chemisorbed CO2 increased significantly after the addition of the base metal. The reactivity of COx ad-species for each catalyst was assessed by temperature-programed surface reaction (TPSR). The characterization revealed that the performance in the Sabatier reaction was a result of the interplay between the amount of chemisorbed CO2 and the reactivity of the COx ad-species, which was maximized for the (10%Ba)15%Ni/Al2O3 catalyst., The Financial support from the Spanish Ministry MINECO (projects PID2020- 119160RB-C21 and -C22), Gobierno de Aragón (Grupo Reconocido DGA T03_20R), and associated EU Regional Development Funds are gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cyclic performance in CO2 capture-methanation of bifunctional Ru with different base metals: Effect of the reactivity of COx ad-species

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Moral Pombo, Jorge
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
9 figures.-- Supplementary information available., Bifunctional materials based on Ru nanoparticles and an alkaline metal (K, Na or Ba) have been scrutinized for several cycles of CO2 capture and subsequent methanation at different temperatures from 250 ºC to 450 ºC. The optimum performance in terms of stable cyclic operation, amount of captured CO2 and relevant methane productivity was attained at different temperature window for each material. For the materials here prepared, the limiting lower operation temperature of stable cyclic performance was determined by the methanation kinetics, which depended on reactivity of COx ad-species captured with each alkaline metal. The highest activity was found with Ba-containing materials, which exhibited a stable and relevant cyclic CH4 productivity at 250 ºC, being one of the lowest operation temperatures reported for a dual functional material to date. This material exhibited stable cyclic performance also in the presence of O2 and H2O, although the CH4 productivity decreases slightly and reversibly compared to that using CO2 containing gas free of O2 and H2O., The Financial support from Spanish Ministry MINECO (projects PID2020-119160RB-C21 and -C22), Gobierno de Aragón (Grupo Reconocido Gobierno de Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics of Pd subsurface hydride formation and their impact on the selectivity control for selective butadiene hydrogenation reaction

  • Asedegbega-Nieto, Esther
  • Iglesias Juez, Ana
  • di Michiel, Marco
  • Fernández, M.
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial hydrogenation reaction. In this study, we introduce some experimental evidence indicating that subsurface Pd hydride species are governing the reactivity of this reaction. In particular, we detect that the extent of formation/decomposition of PdHx species is very sensitive to the Pd nanoparticle aggregate dimensions, and this finally controls the selectivity in this process. The main and direct methodology applied to determine this reaction mechanism step is time-resolved high-energy X-ray diffraction (HEXRD)., The authors acknowledge financial support from Spanish Ministry MINECO (projects PID2020-119160RB-C21 and -C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual functional materials based on Ni and different alkaline metals on alumina for the cyclic stepwise CO2 capture and methanation

  • García-Bordejé, José Enrique
  • Dongil, Ana Belén
  • Conesa, José María
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
8 figures.-- Supplementary information available., Bimetallic catalysts consisting of nickel and one alkali or alkaline-earth metal (Na, K or Ba) on alumina support have been tested in the cyclic CO2 capture and subsequent methanation. The best performance was attained with a different material for cyclic tests (K-Ni/Al) than for Sabatier reaction (Ba-Ni/Al). In cyclic tests, the methane productivity shows different dependence with the temperature for each alkali and alkaline-earth metal. For temperature of 300 °C or above, the dual functional materials show stable cyclic performance when the capture is performed both from 5% CO2 in Ar and from simulated flue gas containing also O2 and H2O. Using the later feed, the CH4 productivity diminish reversibly compared to oxygen free conditions and nickel metal oxidises significantly. K-Ni/Al exhibited the best cyclic performance in terms of CH4 productivity and stability, which is associated to the highest reducibility of oxidised nickel species and the lowest formation of unreducible carbonates., The authors are very grateful to the Grants PID2020-119160RB-C21 and -C22 funded by MCIN/AEI/10.13039/501100011033 and Aragón Government (Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative approaches to sustainable ammonia synthesis under mild conditions

  • Castillejos-López, Eva
  • García-Bordejé, José Enrique
6 figures, 2 tables., Ammonia is one of the most important chemicals in the world because it is a feedstock for fertilizer production and, moreover, it has been proposed as a convenient storage media for renewable H2. Currently, it is produced by Haber-Bosch process, which entails harsh operation conditions and a high carbon footprint, rendering the process difficult to be run by renewable energy. Therefore, substituting the conventional Haber-Bosch process by other approach less energy-intensive and carbon-free is an urgent need. A milder process for ammonia synthesis will enable the implementation of smaller distributed plants more aligned with renewable energies. For this reason, there is a plethora of current research focusing on the development of suitable catalysts with higher activity and selectivity for nitrogen reduction and processes that will work under less severe operating conditions or even at ambient conditions. Some of the most relevant research approaches are here revised and compared., The Financial support from Spanish Investigation Agency (projects PID2020-119160RB−C21 and -C22), Gobierno de Aragón (Grupo Reconocido Gobierno de Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactivity of n-butene using carbon supported Mo carbide and Ni, Mo, Co phosphides catalysts

  • Fernández-Morales, J.M.
  • Martínez Quintana, Laura
  • Dongil, Ana Belén
  • Asedegbega, E.
  • Castillejos, E.
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Conversion of 1-butene was studied over Mo carbides and Ni, Co and Mo phosphides, under continuous gas phase operating conditions at atmospheric pressure and 100 °C, using 1-butene/helium mixture in a molar ratio of 4:1. The conversion was in the range 30–44% and the values were quite stable except for (1:2)CoP, (1:2)NiP, (1:2)MoP-and MoxC supported catalysts. The main reaction was isomerization of 1-butene, and the selectivity to dimerization was observed in a higher ratio on (1:2)MoP and MoxC supported on high surface area graphite. In situ XRD, XPS, NH3-TPD and thermogravimetry (TG) have been used to assess for the formed species on the surface. © 2023 The Authors, Financial support from the Spanish Ministry MINECO (projects PID2020-119160RB-C21 and -C22) and RYC2020-030626-I and from Spanish National Research Council 20228AT002 is gratefully acknowledged., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formic Acid Dehydration Using Mechanochemically Prepared TiO2-Graphite Composites

  • Yruela-Garrido, Marta
  • Martín-Rodríguez, Nuria
  • Castillejos-López, Eva
  • Campos Castellanos, Eduardo
  • Conesa, José María
  • Rodríguez-Ramos, Inmaculada
  • Guerrero-Ruiz, Antonio
Commercial high surface area graphite (HSAG300) and commercial TiO2 were used to produce composite materials through a simple mechanochemical method involving milling and ultrasonic treatments. The acid and basic sites exposed on the surfaces of these materials were characterized by temperature-programmed desorption (TPD) of ammonia and carbon dioxide. The catalytic materials were tested in the dehydration reaction of formic acid to produce hydrogen-free CO. While HSAG300 is practically inactive under reaction conditions (continuous gas flow at temperatures in the range of 100-250 ºC), all samples containing TiO2 are active, exhibiting high selectivity to CO without significant deactivation at moderate reaction temperatures. It is demonstrated that the presence of graphite in the catalysts enhances the specific catalytic activity of TiO2. Assuming that the dehydration reaction is catalyzed by acid sites on the TiO2 surfaces, a comparative evaluation of the surface sites reveals that the graphite-TiO2 interactions not only change the density of surface sites but also modify the strength of the acid centers of TiO2. In summary, the interaction of HSAG300 with TiO2 modulates the surface properties of the prepared composite catalysts, decreasing the total number of basic surface sites and increasing the strength of acidic sites compared to bare TiO2., Authors recognize financial support from Spanish Project grants PID2020-119160RB C21 and -C22 funded by MCIN/AEI, Peer reviewed