Pasar al contenido principal

MAPEO DEL EFECTO DE REGIMENES DE CALENTAMIENTO EN LA MUERTE DE ANISAKIS Y DESTINO DE SUS ALERGENOS EN MUSCULO DE PESCADO. DESARROLLO DE HERRAMIENTAS PARA PROCESAMIENTO OPTIMO

PID2020-119201RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling survival curves of Anisakis L3 after isothermal heat treatments at lethal temperatures

  • Guan, Aiyan
  • Usieto, Marina
  • Sánchez Alonso, Isabel
  • Arcos, Susana C.
  • Careche, Mercedes
  • Otero, Laura
Even though anisakiasis is considered, nowadays, a significant threat to public health all over the world, no attempt has been made up to date to mathematically describe the thermal susceptibility of Anisakis larvae in the third stage (L3). To fill this gap, in this paper, more than 10,000 free (non-encysted) Anisakis L3 were individually heat treated in a thermal cycler at temperatures between 44 °C and 61 °C for different exposure times. After heat exposition, viability was assessed in each larva, survival curves at isothermal conditions were derived, and the effectiveness of four kinetic models (fundamental kinetic model, Mafart model, and probit and logit models) in describing these curves was tested. Evaluation of larvae viability after heat exposition revealed sigmoidal survival curves that increased their steepness with temperature. Of the four models tested, the Mafart model was the one that best fitted the data only differing from the observed survival ratios by 0.12 units on average. Validation experiments performed at temperatures different to those used to create the model corroborated its predictive capacity. Future efforts should be focused in predicting larvae viability at non-isothermal conditions as those occurring during fish cooking., The work has been financed with the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033. T., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Behavioral and physiological changes of Anisakis simplex complex third stage larvae upon heating

  • Guan, Aiyan
  • Usieto, Marina
  • Otero, Laura
  • Arcos, Susana C.
  • Navas, Alfonso
  • Sánchez Alonso, Isabel
  • Careche, Mercedes
There is increasing information on the time-temperature conditions that can be lethal for Anisakis larvae, but little is known about the infective potential of larvae that survive heat treatments. To characterize the risks associated with accidentally undercooked fish, in this paper, more than 5000 Anisakis larvae in the third stage (L3) were individually treated, at quasi-isothermal conditions, in a thermal cycler at 50 ◦C for different exposure times (0–320 s). After heat exposition, surviving larvae were collected and their locomotor activity, resistance to simulated gastric juice (SGJ), agar penetrative ability, and respiration capacity were evaluated. Results show that, even after relatively short treatments that rendered survival ratios (St 50◦C) close to 1 (i.e. all alive), some behavioral and physiological characteristics can be considerably impacted. Thus, L3 locomotor activity and agarpenetrative ability significantly decreased after 60 s at 50 ◦C (S60 s = 1), while heat expositions for 90 s (S90 s ≈0.98) also reduced the resistance to SGJ and the respiration capacity. Our study reveals that the behavior of heattreated Anisakis larvae depends on the intensity of the treatment and the longer the exposure time at 50 ◦C, the greater the changes observed in all the tested indicators. Further research is needed to elucidate the implications of the decline of these indicators on infectivity., This work has been financed by the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing” (HEATSAKIS) Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033.., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting inactivation of Anisakis L3 after non-isothermal heat treatments: Impact of thermal conditions during and after cooking

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
Data will be made available on request., Accurately predicting the thermal inactivation of Anisakis larvae during cooking is essential to ensure food safety while preserving the quality of fishery products. In a previous study, we developed a Weibull-based model that successfully described larval inactivation under isothermal conditions up to 55 °C. However, real cooking processes typically involve dynamic temperature profiles with gradual heating and cooling phases. To estimate Anisakis viability under realistic processing conditions, a predictive model capable of integrating the entire non-isothermal thermal history is required., To do so, in this study, we implemented the differential form of the Weibullian model and explored two alternative formulations to describe how thermal resistance changes with temperature: a single log-quadratic equation and a more flexible piecewise log-quadratic function. All model parameters were optimized using 98 previously published non-isothermal inactivation experiments and validated against 26 independent treatments. While the piecewise model provided a slightly better fit during training, the single log-quadratic formulation showed superior predictive accuracy (R 2 = 0.9782, RMSE = 0.0497) and was selected for further use., The validated model was used to investigate how heating and cooling rates affect larval inactivation. Simulations revealed that slow heating and cooling significantly increase lethality, even at mild temperatures. These predictions were consistent with experimental observations and underscore the critical influence of thermal history beyond peak temperature alone. This modeling approach provides a robust framework for designing safe, quality-preserving cooking protocols and offers valuable support for risk assessment and regulatory guidance in seafood safety., The work has been financed with projects ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS). Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033’, ‘Development of tools to optimize the quality and safety of fishery products. Applications to the risk of exposure to Anisakis. Reference: PIE 202370E041’, and ‘Digital tools to improve the safety of cooked fishery products. Reference: PIE 202570E169’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From predictive modelling to risk management: A framework for assessing Anisakis safety in cooked fish

  • Usieto, Marina
  • Otero, Laura
  • Arcos, Susana C.
  • Careche, Mercedes
Data will be made available on request., Anisakis spp. larvae pose a significant food safety hazard in fishery products. Human infection can occur when these products are consumed raw or subjected to treatments that fail to inactivate the parasite. Current risk management relies on a safe-harbor process recommending a core temperature of at least 60 °C for 1 min when freezing is not applied. Since no explicit performance objective or target lethality has been formally established for Anisakis, the ability to evaluate or optimize cooking practices is, in practice, limited., This study illustrates how a previously developed predictive thermal inactivation model for Anisakis larvae can be operationally integrated into a quantitative, risk-based framework, using oven-cooked hake (Merluccius merluccius L.) as a representative case study. A 4-log lethality target was first defined by choosing a conservative performance objective. The model was then experimentally validated using hake fillets spiked with viable larvae and subjected to domestic oven-cooking conditions generating heterogeneous heating and cooling profiles. Model predictions closely matched experimental observations, correctly classifying fillets as ‘Safe’/’Not safe’. The validated model was subsequently applied to evaluate common household cooking practices and to critically assess the safe-harbor criterion. Results showed that substantial larval inactivation consistent with the defined logarithmic reduction limit (R ≥ 4) may be achieved even when preparations do not comply strictly with the ≥60 °C for ≥1 min criterion., Overall, this work shows that predictive modelling, when combined with risk-based targets, can offer a structured and informative approach for characterizing Anisakis inactivation under realistic cooking conditions, providing a quantitative tool for risk assessment and management intended to support decision-making., The work has been financed with projects ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS). Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033’, ‘Development of tools to optimize the quality and safety of fishery products. Applications to the risk of exposure to Anisakis. Reference: PIE 202370E041’, and ‘Digital tools to improve the safety of cooked fishery products. Reference: PIE 202570E169’., Peer reviewed