Pasar al contenido principal

MAPEO DEL EFECTO DE REGIMENES DE CALENTAMIENTO EN LA MUERTE DE ANISAKIS Y DESTINO DE SUS ALERGENOS EN MUSCULO DE PESCADO. DESARROLLO DE HERRAMIENTAS PARA PROCESAMIENTO OPTIMO

PID2020-119201RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling survival curves of Anisakis L3 after isothermal heat treatments at lethal temperatures

  • Guan, Aiyan
  • Usieto, Marina
  • Sánchez Alonso, Isabel
  • Arcos, Susana C.
  • Careche, Mercedes
  • Otero, Laura
Even though anisakiasis is considered, nowadays, a significant threat to public health all over the world, no attempt has been made up to date to mathematically describe the thermal susceptibility of Anisakis larvae in the third stage (L3). To fill this gap, in this paper, more than 10,000 free (non-encysted) Anisakis L3 were individually heat treated in a thermal cycler at temperatures between 44 °C and 61 °C for different exposure times. After heat exposition, viability was assessed in each larva, survival curves at isothermal conditions were derived, and the effectiveness of four kinetic models (fundamental kinetic model, Mafart model, and probit and logit models) in describing these curves was tested. Evaluation of larvae viability after heat exposition revealed sigmoidal survival curves that increased their steepness with temperature. Of the four models tested, the Mafart model was the one that best fitted the data only differing from the observed survival ratios by 0.12 units on average. Validation experiments performed at temperatures different to those used to create the model corroborated its predictive capacity. Future efforts should be focused in predicting larvae viability at non-isothermal conditions as those occurring during fish cooking., The work has been financed with the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033. T., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Behavioral and physiological changes of Anisakis simplex complex third stage larvae upon heating

  • Guan, Aiyan
  • Usieto, Marina
  • Otero, Laura
  • Arcos, Susana C.
  • Navas, Alfonso
  • Sánchez Alonso, Isabel
  • Careche, Mercedes
There is increasing information on the time-temperature conditions that can be lethal for Anisakis larvae, but little is known about the infective potential of larvae that survive heat treatments. To characterize the risks associated with accidentally undercooked fish, in this paper, more than 5000 Anisakis larvae in the third stage (L3) were individually treated, at quasi-isothermal conditions, in a thermal cycler at 50 ◦C for different exposure times (0–320 s). After heat exposition, surviving larvae were collected and their locomotor activity, resistance to simulated gastric juice (SGJ), agar penetrative ability, and respiration capacity were evaluated. Results show that, even after relatively short treatments that rendered survival ratios (St 50◦C) close to 1 (i.e. all alive), some behavioral and physiological characteristics can be considerably impacted. Thus, L3 locomotor activity and agarpenetrative ability significantly decreased after 60 s at 50 ◦C (S60 s = 1), while heat expositions for 90 s (S90 s ≈0.98) also reduced the resistance to SGJ and the respiration capacity. Our study reveals that the behavior of heattreated Anisakis larvae depends on the intensity of the treatment and the longer the exposure time at 50 ◦C, the greater the changes observed in all the tested indicators. Further research is needed to elucidate the implications of the decline of these indicators on infectivity., This work has been financed by the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing” (HEATSAKIS) Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033.., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Development of an image analysis device for the study of phenotypic characteristics of Anisakis larvae

  • Perosanz, Carlota
  • Perosanz, Sergio
  • Usieto, Marina
  • Otero, Laura
  • Careche, Mercedes
Trabajo presentado al 52nd Annual WEFTA Meeting: 14-18 Oct 2024, Çeşme-İzmir, Türkiye., The work has been financed with the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS) Reference: PID2020-119201RBI00/ AEI/10.13039/501100011033. and “Development of tools to optimize the quality and safety of fishery products. Application to the exposure risk to Anisakis” (ANITOOLS), Reference: CSIC 202370E041., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Instrumental texture

  • Sánchez Alonso, Isabel
  • Careche, Mercedes
The acceptability of fish and fish products by consumers depends to a large extent on their texture characteristics, and these are affected by many interrelated factors. Sensory evaluation of texture is difficult to perform, so alongside with the development of sensory methods, instruments and tests have been designed and applied for measuring the textural characteristics of fish and fish products. This chapter describes different instrumental texture measurements as applied in fish and fish products such as Kramer, Warner-Bratzler, puncture, tensile and compression tests, texture profile analysis, and viscoelastic methods, with examples on their use in a selected number of conditions. For those products in which the integrity of the fish muscle is maintained, its complex structure imposes some restrictions on the application of some of the tests. Except for the quality control, in which it is needed to perform simple and fast tests, for most applications, the combination of more than one method can be of great value., The work has been partly financed with the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS) Reference: PID2020119201RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Thermal inactivation of Anisakis can be modelled at non-isothermal conditions

  • Usieto, Marina
  • Careche, Mercedes
  • Arcos, Susana C.
  • Otero, Laura
Trabajo presentado al 52nd Annual WEFTA Meeting: 14-18 Oct 2024, Çeşme-İzmir, Türkiye., The work has been financed with the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing I00/AEI/10.13039/501100011033. (HEATSAKIS) Reference: PID2020-119201RB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting inactivation of Anisakis L3 after non-isothermal heat treatments: Impact of thermal conditions during and after cooking

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
Data will be made available on request., Accurately predicting the thermal inactivation of Anisakis larvae during cooking is essential to ensure food safety while preserving the quality of fishery products. In a previous study, we developed a Weibull-based model that successfully described larval inactivation under isothermal conditions up to 55 °C. However, real cooking processes typically involve dynamic temperature profiles with gradual heating and cooling phases. To estimate Anisakis viability under realistic processing conditions, a predictive model capable of integrating the entire non-isothermal thermal history is required., To do so, in this study, we implemented the differential form of the Weibullian model and explored two alternative formulations to describe how thermal resistance changes with temperature: a single log-quadratic equation and a more flexible piecewise log-quadratic function. All model parameters were optimized using 98 previously published non-isothermal inactivation experiments and validated against 26 independent treatments. While the piecewise model provided a slightly better fit during training, the single log-quadratic formulation showed superior predictive accuracy (R 2 = 0.9782, RMSE = 0.0497) and was selected for further use., The validated model was used to investigate how heating and cooling rates affect larval inactivation. Simulations revealed that slow heating and cooling significantly increase lethality, even at mild temperatures. These predictions were consistent with experimental observations and underscore the critical influence of thermal history beyond peak temperature alone. This modeling approach provides a robust framework for designing safe, quality-preserving cooking protocols and offers valuable support for risk assessment and regulatory guidance in seafood safety., The work has been financed with projects ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS). Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033’, ‘Development of tools to optimize the quality and safety of fishery products. Applications to the risk of exposure to Anisakis. Reference: PIE 202370E041’, and ‘Digital tools to improve the safety of cooked fishery products. Reference: PIE 202570E169’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From predictive modelling to risk management: A framework for assessing Anisakis safety in cooked fish

  • Usieto, Marina
  • Otero, Laura
  • Arcos, Susana C.
  • Careche, Mercedes
Data will be made available on request., Anisakis spp. larvae pose a significant food safety hazard in fishery products. Human infection can occur when these products are consumed raw or subjected to treatments that fail to inactivate the parasite. Current risk management relies on a safe-harbor process recommending a core temperature of at least 60 °C for 1 min when freezing is not applied. Since no explicit performance objective or target lethality has been formally established for Anisakis, the ability to evaluate or optimize cooking practices is, in practice, limited., This study illustrates how a previously developed predictive thermal inactivation model for Anisakis larvae can be operationally integrated into a quantitative, risk-based framework, using oven-cooked hake (Merluccius merluccius L.) as a representative case study. A 4-log lethality target was first defined by choosing a conservative performance objective. The model was then experimentally validated using hake fillets spiked with viable larvae and subjected to domestic oven-cooking conditions generating heterogeneous heating and cooling profiles. Model predictions closely matched experimental observations, correctly classifying fillets as ‘Safe’/’Not safe’. The validated model was subsequently applied to evaluate common household cooking practices and to critically assess the safe-harbor criterion. Results showed that substantial larval inactivation consistent with the defined logarithmic reduction limit (R ≥ 4) may be achieved even when preparations do not comply strictly with the ≥60 °C for ≥1 min criterion., Overall, this work shows that predictive modelling, when combined with risk-based targets, can offer a structured and informative approach for characterizing Anisakis inactivation under realistic cooking conditions, providing a quantitative tool for risk assessment and management intended to support decision-making., The work has been financed with projects ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS). Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033’, ‘Development of tools to optimize the quality and safety of fishery products. Applications to the risk of exposure to Anisakis. Reference: PIE 202370E041’, and ‘Digital tools to improve the safety of cooked fishery products. Reference: PIE 202570E169’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modeling thermal mortality of Anisakis L3 heated in quasi-isothermal conditions

  • Guan, Aiyan
  • Usieto, Marina
  • Careche, Mercedes
  • Navas, Alfonso
  • Cobacho Arcos, Susana
  • González-López, María Rosa
  • Jiménez-Ruiz, Yolanda
  • Sánchez Alonso, Isabel
  • Mendizábal, Angel
  • Martínez, Iciar
  • Eguiraun, Harkaitz
  • Otero, Laura
Resumen del trabajo presentado a la 50th West European Fish Technologists Association Conference (WEFTA 2022), celebrada en Rotterdam (Netherlands) del 17 al 21 de octubre del 2022., Funded by the Spanish MINECO, project HEATSAKIS, Ref PID2020-119201RB-I00., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Study of the progressive changes in Anisakis third stage larvae upon heating until their inactivation

  • Guan, Aiyan
  • Usieto, Marina
  • Otero, Laura
  • Navas, Alfonso
  • Cobacho Arcos, Susana
  • Sánchez Alonso, Isabel
  • Careche, Mercedes
Anisakis spp. are nematode parasites found in marine organisms. Humans may become accidental hosts when infected by fish containing viable Anisakis third-stage larvae. Direct cooking, without the need of previous freezing will avoid the inherent loss in quality by freezing and may save time and planning ahead the meals, since if the fish is to be frozen, authorities recommend a minimum of 5 days at -20 ºC in domestic freezers (¿3 stars). Freezing is not necessary if the fish is heated at >60 °C for at least 1 min (core temperature). Results from a recent study suggest that conditions reported in the EU Regulation should be revisited, since when factors such as relative temperature of heating or time to reach the set temperature are taken into account, temperatures below 60 °C would be equally safe in terms of inactivation. According to FAO reports, traditional cooking methods may not even assure 55 ºC,1 minute in the thermal center of the piece. The literature on treatments to kill Anisakis does not usually take into account the changes occurring in the dying larvae and any larva with mobility is considered able to infect a human but this higher safety margin may lead to overcooking the products. We analyze the potential infectivity of heat-treated larvae when in-doubt-situations. For that, we assess the effect of the heating regimes to the resistance to simulated gastric juice (SGJ), and oxygen consumption rates of larvae that have survived a heating treatment. Results show that at a fixed temperature, the mortality in SGJ and respiration rates depend on the heating time, suggesting that the risk of infection of a surviving larvae is dependent on the strength of heating. These results aid in the assessment of risk posed by Anisakis., Funded by the Spanish MINECO, project HEATSAKIS, Ref PID2020-119201RB-I00., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High throughput screening method for Anisakis L3 detection of locomotor activity and viability under thermal-induced stress

  • Guan, Aiyan
  • Usieto, Marina
  • Cobacho Arcos, Susana
  • Sánchez Alonso, Isabel
  • Otero, Laura
  • Careche, Mercedes
Resumen del trabajo presentado a la 51th West European Fish Technologists Association Conference (WEFTA 2023), celebrada en Copenhagen (Denmark) del 16 al 20 de octubre del 2023., The work has been financed with project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS). Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Modelización de la inactivación térmica de larvas de Anisakis

  • Usieto, Marina
  • Careche, Mercedes
  • Sánchez Alonso, Isabel
  • Otero, Laura
  • Pérez-Mateos, Miriam
Trabajo presentado en el II Foro del ICTAN, celebrado el 10 de abril de 2025., This work has been financed by the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing” (HEATSAKIS), REFECENCE: PID2020- 119201RB-I00/AEI/10.13039/501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Beyond 60 °C: Validating thermal safety against anisakis in traditional cooking

  • Usieto, Marina
  • Otero, Laura
  • Sánchez Alonso, Isabel
  • Careche, Mercedes
Resumen del trabajo presentado al 9ºPhDay Complutense, celebrada en la Facultad de Ciencias Biológicas de la UCM (Madrid) el día 9 de octubre de 2025., The work has been financed with the project “Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS) Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Inactivación de larvas de Anisakis por calor: Estrategias para un procesamiento óptimo del pescado

  • Usieto, Marina
  • Otero, Laura
  • Arcos, Susana C.
  • Careche, Mercedes
Trabajo presentado a las II Jornadas Trimestrales de Investigación, celebradas en la Facultad de Ciencias Biológicas de la UCM el 30 de marzo de 2023., The work has been financed with project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS). Reference: PID2020-119201RB-I00/AEI/10.13039/501100011033’, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Isothermal_Anisakis_INACT

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
Software to calculate the viability of Anisakis larvae after an isothermal heat treatment at the specified temperature and time., The creation of this software was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/ 501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Thermal_Anisakis_INACT_SIM

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
Software to simulate a heating/cooling process (either isothermal or non-isothermal) and to calculate the viability of Anisakis larvae afterward., The creation of this software was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/ 501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Viability data of Anisakis larvae after isothermal heat treatments

  • Guan, Aiyan
  • Usieto, Marina
  • Sánchez Alonso, Isabel
  • Arcos, Susana C.
  • Careche, Mercedes
  • Otero, Laura
The dataset contains viability data obtained from more than 10,000 free (non-encysted) Anisakis larvae individually heat treated in a thermal cycler at temperatures between 46 ?C and 61 ?C for different exposure times. The aim of the data collection was to obtain survival curves at isothermal conditions and a model capable of describing these curves. File TtVIAB_data.xls contains two worksheets: the first containing experimental data used to build the model (MODEL BUILDING) and the last containing data used to validate the model (MODEL VALIDATION)., Data collection was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID2020-119201RB-I00/AEI/10.13039/ 501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Thermal_Anisakis_INACT

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
Software to calculate the viability of Anisakis larvae after a heating/cooling process (either isothermal or non-isothermal) described in a time-temperature matrix used as an input., The creation of this software was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/ 501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Isothermal_Anisakis_INACT_Time

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
Software to calculate the time required at a given temperature to achieve the desired level of inactivation in Anisakis larvae., The creation of this software was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID2020-119201RB-I00/AEI/10.13039/ 501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of Anisakis simplex behavioral and physiological changes upon heating

  • Guan, Aiyan
  • Usieto, Marina
  • Otero, Laura
  • Arcos, Susana C.
  • Navas, Alfonso
  • Sánchez Alonso, Isabel
  • Careche, Mercedes
The dataset contains viability, behavioral and physiological data obtained from more than 5,000 free (non-encysted) Anisakis. The aim of the data collection was to obtain information on the behavioral and physiological changes of Anisakis larvae that survived thermal treatments at maximum temperatures that actually may be reached in accidentally undercooked fish in order to characterize the associated risks., File Anisakis_tT_behav_data.xls contains five worksheets. The first [Table 1 & Survival (Fig 1)] contains, for each indicator, the thermal conditions tested, the total number of Anisakis L3 treated under each condition, and the number of surviving larvae. It also includes the survival data per exposure time averaged across the experiments conducted for each of the indicators. The second worksheet [Fig 2] contains locomotor activity data of Anisakis L3 that survived isothermal heat treatments at 50 °C for different exposure times. The third worksheet [Survival in SGJ (Figs 3&4)] contains data on the lifespan (days) of untreated larvae and larvae that survived isothermal heat treatments at 50 °C for different exposure times during incubation in simulated gastric juice at 37 °C. The fourth worksheet [Penetration in agar (Fig 5)] contains data of the ability of Anisakis larvae that survived isothermal heat treatments at 50 °C for different exposure times to penetrate solid agar during incubation at 37 °C. The fifth worksheet [Oxygen consumption rate (Fig 6)] contains respiration analysis data of Anisakis L3 that survived isothermal heat treatments at 50 ?C for different exposure times., Data collection was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data: Predicting inactivation of Anisakis L3 after non-isothermal heat treatments: Impact of thermal conditions during and after cooking [Dataset]

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
This dataset contains the experimental data used to develop and validate a predictive model for the thermal inactivation of Anisakis L3 larvae under non-isothermal heat treatments. It comprises a total of 124 laboratory experiments performed with isolated larvae in a thermal cycler under controlled conditions, including 98 experiments used for model training (1-s2.0-S0956713525006590-mmc1.docx) and 26 independent experiments used for validation (1-s2.0-S0956713525006590-mmc2.docx). Each record includes the initial temperature, heating rate, target temperature, holding time, cooling rate, final temperature, and the observed larval survival ratio. The experiments covered target temperatures between 46 and 61 °C and a range of heating and cooling rates. The dataset was generated to investigate how complete thermal histories, rather than peak temperature alone, influence Anisakis survival. These data were used to calibrate and evaluate a Weibull-based non-isothermal inactivation model and to assess the effects of heating and cooling dynamics on parasite lethality., Data collection was financed by the State Research Agency (AEI) through the project ‘Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)’. Reference: PID 2020-119201RB-I00/AEI/10.13039/ 501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

THERMAL_ANISAKIS_INACT_APP

  • Usieto, Marina
  • Careche, Mercedes
  • Otero, Laura
A standalone application to simulate a heating/cooling process and to calculate the viability of Anisakis larvae afterward., The creation of this software was financed by the State Research Agency (AEI) through the project Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS) . Reference: PID 2020-119201RB-I00/AEI/10.13039/ 501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Strategies to deal with Anisakis: A Look from a Fish Technologist

  • Careche, Mercedes
Opening Key Note 50th West European Fish Technologists’ Association (WEFTA) Conference - Rotterdam, the Netherlands, 17-21 October 2022., Anisakis spp. are nematode parasites that pose a quality and safety problem when they are present in seafood products. Besides being an aesthetic issue, humans may become accidental hosts by eating raw or undercooked fish containing viable Anisakis spp. third-stage larvae, causing infection (i.e. anisakiasis), and allergic responses, the main being gastro-allergic anisakiasis. These allergic reactions can also be elicited by fishery products contaminated with allergens, with no need for live parasites. One of the strategies to reduce the risk posed by Anisakis includes avoiding their presence in the marketed fish, for example, by selecting the zone of capture, improving the screening programs or implementing new methodology for detection of larvae or parasite material. But parasites are unfortunately present in our fish and assuring their inactivation is critical for controlling anisakiasis which in turn is crucial to hinder sensitization to Anisakis, considered to require viable larvae to trigger allergic reactions. Technology and culinary treatments are key for this, with freezing and cooking being the most relevant. The mortality of Anisakis, fate of their allergens and the quality of the fish products will be affected by the intensity of treatments. Conversely, the Anisakis species, physiology or metabolic status, may have an impact on the effectiveness of a given treatment. Due to the variety of technological situations and fish products, such as fish with different composition or geometries, we need to work towards models of Anisakis mortality that can be coupled with heat transfer simulation tools, so that we are able to expand the results obtained in a given condition to wider scenarios for a more precise risk management. These issues will be addressed in the present talk., ANIDET (AGL2009-12485-C03-01/02/03) - EU PARASITE (GA 312068) - ANIRISK (AGL2015-68248-C1-C2-MINECO-FEDER) - HEATSAKIS (PID2020-119201RB-I00/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Species identification of Anisakis larvae collected from Merluccius merluccius (2022-2026)

  • Usieto, Marina
  • Guan, Aiyan
  • Sánchez Alonso, Isabel
  • Jiménez-Ruiz, Yolanda
  • Arcos, Susana C.
  • Careche, Mercedes
This dataset contains species identification data of Anisakis larvae collected from hake (Merluccius merluccius L.) caught in the Northeast Atlantic (FAO area 27) between January 2022 and February 2026. For each lot, the dataset includes the date of fish reception in the laboratory, the host fish species, the total number of larvae collected from the fish, the number of larvae used for species identification, and the percentages of Anisakis simplex sensu stricto, Anisakis pegreffii, and heterozygous genotypes determined through molecular analyses. The dataset provides information on the species composition of Anisakis larvae collected from hake over a five-year period., Data collection was financed by the State Research Agency (AEI) through the project "Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)". Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Proteomic analysis of Anisakis simplex s.s. larvae subjected to sublethal and lethal thermal treatments [Dataset]

  • Usieto, Marina
  • Ciordia, Sergio
  • Arcos, Susana C.
  • Sánchez Alonso, Isabel
  • Navas, Alfonso
  • Careche, Mercedes
This dataset contains protein identification data from Anisakis simplex sensu stricto larvae exposed to sublethal and lethal thermal treatments using TMTpro-18plex labelling coupled with LC-ESI-MS/MS and processed with Proteome Discoverer 2.5. The data are organized in two worksheets containing experimental coding information and protein identification., Data collection was financed by the State Research Agency (AEI) through the project "Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)". Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Locomotor activity of Anisakis spp. larvae subjected to thermal treatments [Dataset]

  • Usieto, Marina
  • Guan, Aiyan
  • Otero, Laura
  • Careche, Mercedes
This dataset contains locomotor activity measurements of Anisakis larvae exposed to different thermal treatments and monitored using the WMicrotracker Mini (PhylumTECH S. A., Santa Fe, Argentina). The dataset includes data from larvae exposed to 11 temperature-time treatment combinations, untreated larvae, and two negative controls: 0.145 M NaCl without larvae and dead (frozen) larvae. Locomotor activity was recorded at 5-minute intervals over a 22-hour period., The dataset consists of twelve experiments (Exp 1-Exp 12), each corresponding to an independent experimental run. Each experiment is stored in a separate Excel file containing a single worksheet, whose name corresponds to the date on which the experiment was conducted. •Experiments 1 and 3 include untreated controls and thermal treatments: 50 °C for 150 s and 50 °C for 165 s. •Experiment 2 contains thermal treatments 49 °C for 550 s; 51 °C for 140 s, and 53 °C for 50 s. •Experiment 4 comprises the following treatments: 49 °C for 410 s; 51 °C for 110 s; 53 °C for 40 s •Experiment 5 includes the treatment at 59 °C for 0 s as well as negative controls containing 0.145 M NaCl solution and no larvae. •Experiments 6, 7, 8 and 9 include: 60 °C for 60 s; 61 °C for 60 s. •Experiment 10 includes negative-control wells containing dead larvae previously frozen at -20 °C •Experiments 11 and 12 include only 0.145 M NaCl solution and no larvae., Data collection was financed by the State Research Agency (AEI) through the project "Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)". Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Derived Mobility Data of Anisakis Larvae Exposed to Thermal Treatments Obtained from Image-Based Activity Measurements [Dataset]

  • Usieto, Marina
  • Perosanz, Sergio
  • Perosanz, Carlota
  • Otero, Laura
  • Careche, Mercedes
The dataset includes larvae subjected to three thermal treatment conditions (52 C for 12 s, 52 C for 41 s, and 52 C for 73 s), a dead-larva control (50 C for 456 s), and untreated controls. The dataset consists of 13 experiments, each corresponding to an independent experimental run. Each experiment is stored in a separate Excel file containing a single worksheet, named accordingly to the date on which the experiment was conducted. The file name indicates the duration of exposure to 52 C applied to the larvae in that experiment. In all experiments, the first column of wells (A1 to H1), corresponds to untreated larvae, whereas the last column of wells (A12 to H12), corresponds to larvae subjected to 50 C 456 s, which served as dead larvae controls. The remaining wells (A2 to H11) contain larvae subjected to different thermal treatments, depending on the experiment: * Three experiments include larvae treated at 52 C for 12 s. * Four experiment include larvae treated at 52 C for 41 s. * Four experiments include larvae treated at 52 C for 73 s. * Two experiment include only untreated controls., Data collection was financed by the State Research Agency (AEI) through the project "Mapping the effect of heating regimes on Anisakis death and fate of their allergens in fish muscle. Development of a decision support tool for optimal processing (HEATSAKIS)". Reference: PID 2020-119201RB-I00/AEI/10.13039/501100011033., No