Pasar al contenido principal

HERRAMIENTAS DE DIGITALIZACION AVANZADA COMO SOPORTE A LA PLANIFICACION INTEGRAL DE DECONSTRUCCIONES

PID2021-123475OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A systematic literature review of low-cost 3D mapping solutions

  • Balado Frías, Jesús
  • Garozzo, Raissa
  • Winiwarter, Lukas
  • Tilon, Sofia
In "low-cost" solutions, ensuring economic accessibility and democratizing the availability of emerging technologies stand as pivotal considerations. This study undertakes a systematic literature review of low-cost 3D mapping solutions. Leveraging SCOPUS as the primary database, a comprehensive bibliometric analysis encompassing 1380 publications was conducted, subsequently narrowing the focus to 87 recent publications for detailed review. This research endeavors to delineate the defining characteristics of low-cost systems, elucidate their principal applications and preferred platforms, assess accessibility level, gauge the extent of innovation in both hardware and software development, explore the contributions of Deep Learning and data fusion, evaluate the consideration of data quality, and examine the contemporary relevance of photogrammetry within low-cost context. The findings demonstrate that many authors subjectively use the term low-cost to highlight qualities of a technology, methodology or sensor, but challenges arise from data quality comparisons with high-cost systems., Agencia Estatal de Investigación | Ref. PID2021-123475OA-I00, Agencia Estatal de Investigación | Ref. RYC2022-038100-I, Xunta de Galicia | Ref. ED431F 2022/08, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

3D as‐built environments in extended reality applications: a systematic review

  • Balado Frías, Jesús
  • Feng, Yu
  • Qiu , Zhouyan
  • Gao, Weixiao
  • Julin, Arttu
Accurate integration and navigation of real‐world 3D spaces are fundamental for next‐generation Extended Reality (XR) systems, enhancing immersion, utility, and fidelity. This paper systematically reviews XR workflows using PRISMA guidelines, focusing on 3D data acquisition, modeling, visualization, and user interaction, based on 96 journal publications. Data collection for XR relies on photogrammetry, RGB‐D cameras, and LiDAR, often enhanced by multi‐sensor fusion, although real‐time transmission and semantic alignment remain challenging. XR pipelines are dominated by Building Information Modeling (BIM) software and game engines, frequently integrating Computer‐Aided Design (CAD) models and 3D scanned data. Visualization varies from photorealistic renderings to schematic representations, with Virtual Reality headsets favored for training and Augmented Reality devices applied in inspection and navigation. Interaction paradigms encompass controllers, gestures, gaze, voice, and haptics, with increasing reliance on Artificial Intelligence for multimodal fusion and processing. Despite progress, key challenges persist, including bandwidth limitations, manual 3D modeling, hybrid data management, interoperability issues, and scarcity of open‐source solutions. Additional identified barriers involve balancing visual quality with performance in specific contexts, limited accuracy of non‐invasive Brain‐Computer Interfaces, and restricted market acceptance due to high costs. Overall, XR adoption remains constrained by technical, usability, and accessibility gaps., Universidade de Vigo/CISUG, Xunta de Galicia | Ref. EDC431C 2024/30, Xunta de Galicia | Ref. ED431F 2024/06, Agencia Estatal de Investigación | Ref. RYC2022-038100-I, Agencia Estatal de Investigación | Ref. PID2021-123475OA-I00, Deutsche Forschungsgemeinschaft | Ref. 499168241, National Research Council of Finland, Business Finland | Ref. MIXER (3475/31/2023)
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Constructive solid geometry for automatic topology-aware BIM reconstruction from point clouds

  • Albadri , Muataz Safaa Abed
  • González Cabaleiro, Patricia
  • Fernández Álvarez, Antonio
  • Díaz Vilariño, Lucía
The automatic reconstruction of Building Information Models (BIMs) remains challenging, especially when applied to multi-storey buildings and indoor environments with non-Manhattan layouts and curved structures. To address these challenges, this paper presents a novel method that places Constructive Solid Geometry (CSG) at the core of building reconstruction from point clouds. The methodology also integrates the Segment Anything Model (SAM) and knowledge-based rules to reconstruct as-built BIMs while preserving the geometry and topology of building elements. The proposed approach consists of two main stages: SAM-based segmentation and CSG-based modelling. First, SAM is used to segment rooms, as well as door and window openings. Solids are then generated for the indoor spaces and openings. Finally, a set of Boolean operations is applied to reconstruct building elements, including slabs, walls, indoor spaces, doors, and windows, while subtracting openings of doors, windows, and staircases. Finally, the reconstructed model is encoded with semantic information following the Industry Foundation Classes (IFC) schema. The method was evaluated on seven two-storey building point clouds and demonstrated strong performance, achieving a mean Intersection over Union (mIoU) greater than 90% for floor plan reconstruction, a precision above 87% for door and window detection, and mean geometric deviations below 8 cm for BIM reconstruction., Agencia Estatal de Investigación | Ref. RYC2020-029193-I, Xunta de Galicia | Ref. ED431F 2022/08, Agencia Estatal de Investigación | Ref. PID2021-123475OA-I00, Agencia Estatal de Investigación | Ref. CNS2022-135730, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Mixed reality head mounted displays for enhanced indoor point cloud segmentation with virtual seeds

  • Navares Vázquez, Juan Carlos
  • Arias Sánchez, Pedro
  • Díaz Vilariño, Lucía
  • Balado Frías, Jesús
Mixed Reality (MR) Head Mounted Displays (HMDs) offer a hitherto underutilized set of advantages compared to conventional 3D scanners. These benefits, inherent to MR-HMDs albeit not originally intended for such applications, encompass the freedom of hand movement, hand tracking capabilities, and real-time mesh visualization. This study leverages these attributes to enhance indoor scanning process. The primary innovation lies in the conceptualization of manual-positioned MR virtual seeds for the purpose of indoor point cloud segmentation via a region-growing approach. The proposed methodology is effectively implemented using the HoloLens 2 platform. An application is designed to enable the remote placement of virtual tags based on the user’s visual focus on the MR-HMD display. This non-intrusive interface is further enriched with expedited tag saving and deletion functionalities, as well as augmented tag visualization through overlaying them on real-world objects. To assess the practicality of the proposed method, a comprehensive real-world case study spanning an area of 330 s2 is conducted. Remarkably, the survey demonstrates remarkable efficiency, with 20 virtual tags swiftly deployed, each requiring a mere 2 s for precise positioning. Subsequently, these virtual tags are employed as seeds in a region-growing algorithm for point cloud segmentation. The accuracy of virtual tag positioning is found to be exceptional, with an average error of 2.4 ± 1.8 cm. Importantly, the user experience is significantly enhanced, leading to improved seed positioning and, consequently, more accurate final segmentation results., Agencia Estatal de Investigación | Ref. RYC2022–038100-I, Agencia Estatal de Investigación | Ref. RYC2020-029193-I, Agencia Estatal de Investigación | Ref. PID2021-123475OA-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Estudio comparativo termográfico mediante smartphone y cámara en edificios, Thermographic comparative study using smartphone and camera technology in buildings

  • Alonso Rodríguez, José Antonio
  • Balado Frías, Jesús
  • González Cespón, José Luís
  • Díaz Vilariño, Lucía
The cost of thermographic cameras has significantly decreased in recent years, making it an accessible and cost-effective solution for building and infrastructure inspection. With advancements in technology, low-cost thermographic devices have now become readily available in the market. These cost-effective devices offer a more convenient and accessible option for individuals and businesses to perform onsite temperature measurements. In this paper, we examine the capabilities and limitations of a thermal-equipped smartphone and the potential impact on the thermography industry by comparison with a dedicated thermographic camera. The advantages of thermography still hold true for recent low-cost devices: non-invasive inspections, quick and efficient measurements, and hidden defects easily detected. The low-cost thermal-equipped smartphone proved to be a highly maneuverable system, easy to use and with option of overlapping with real color image, what facilitates the interpretation. The low-cost system is also characterized by a larger field of view but also by a lower resolution, what makes it impracticable for measuring small objects. In any case, integration of non-destructive technologies in smartphones opens up a whole new world of possibilities for spreading the inspection of as-built buildings and infrastructures and democratizing the technology, El coste de las cámaras termográficas ha disminuido considerablemente en los últimos años, lo que las convierte en una solución accesible y rentable para la inspección de edificios e infraestructuras. Con los avances tecnológicos, los dispositivos termográficos de bajo coste ya están disponibles en el mercado. Estos dispositivos económicos ofrecen una opción más cómoda y accesible para que particulares y empresas realicen mediciones de temperatura in situ. En este artículo, examinamos las capacidades y limitaciones de un smartphone equipado con termografía y el impacto potencial en el sector de la termografía en comparación con una cámara termográfica específica. Las ventajas de la termografía siguen siendo válidas para los dispositivos recientes de bajo coste: inspecciones no invasivas, mediciones rápidas y eficaces, y defectos ocultos fácilmente detectables. El smartphone de bajo coste equipado con termografía demostró ser un sistema muy manejable, fácil de usar y con opción de superposición con imagen en color real, lo que facilita la interpretación. El sistema de bajo coste también se caracteriza por un mayor campo de visión, pero también por una menor resolución, lo que lo hace impracticable para medir objetos pequeños. En cualquier caso, la integración de tecnologías no destructivas en los smartphones abre todo un nuevo mundo de posibilidades para difundir la inspección de edificios e infraestructuras en construcción y democratizar la tecnología., Xunta de Galicia | Ref. ED481B-2019-061, Agencia Estatal de Investigación | Ref. RYC2020- 029193-I, Agencia Estatal de Investigación | Ref. PID2021-123475OAI00, Agencia Estatal de Investigación | Ref. PCI2022-132943