Pasar al contenido principal

Geospatial intelligence for the indoor/outdoor seamless modelling towards multimodal mobility and universal accessibility

RYC2020-029193-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A deep learning approach for the recognition of urban ground pavements in historical sites

  • Treccani, D.
  • Balado Frías, Jesús
  • Fernández, A.
  • Adami, A.
  • Díaz Vilariño, Lucía
Urban management is a topic of great interest for local administrators, particularly because it is strongly connected to smart city issues and can have a great impact on making cities more sustainable. In particular, thinking about the management of the physical accessibility of cities, the possibility of automating data collection in urban areas is of great interest. Focusing then on historical centres and urban areas of cities and historical sites, it can be noted that their ground surfaces are generally characterised by the use of a multitude of different pavements. To strengthen the management of such urban areas, a comprehensive mapping of the different pavements can be very useful. In this paper, the survey of a historical city (Sabbioneta, in northern Italy) carried out with a Mobile Mapping System (MMS) was used as a starting point. The approach here presented exploit Deep Learning (DL) to classify the different pavings. Firstly, the points belonging to the ground surfaces of the point cloud were selected and the point cloud was rasterised. Then the raster images were used to perform a material classification using the Deep Learning approach, implementing U-Net coupled with ResNet 18. Five different classes of materials were identified, namely sampietrini, bricks, cobblestone, stone, asphalt. The average accuracy of the result is 94%., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED431C 2020/01, Ministerio de Ciencia e Innovación | Ref. PID2019-105221RB-C43, Ministerio de Ciencia e Innovación | Ref. RYC2020-029193-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

IFC2INDOORGML: an open-source tool for generating indoorgml from ifc

  • Diakite, A. A.
  • Díaz Vilariño, Lucía
  • Biljecki, F.
  • Isikdag, Ü.
  • Simmons, S.
  • Li, K.
  • Zlatanova, S.
The interest in 3D indoor models has been continuously growing. Most such models are made available as point clouds or BIM (e.g., IFC), the former being generally provided as unstructured information while the latter comes highly structured and rich in semantic information. IFC models are consequently more suitable for direct use, but they can be very complex and contain too many details, which often raises privacy concerns. IndoorGML is one of the standards for describing 3D indoor space with the purpose of supporting Location Based Services (LBS). It relies on solid scientific concepts and offers a high flexibility with extension mechanisms. It provides a geometric, topological, and semantic description of the indoor which facilitates specifically applications like indoor navigation or facility management. Additionally, it can represent complex indoor environments without compromising privacy, thanks to its high level of abstraction. However, despite its solid conceptual basis, IndoorGML is suffering from a lack of practical tools and remains hard to produce, making it largely unavailable. In this project, we developed an open-source tool named ifc2indoorgml allowing to automatically generate IndoorGML models from IFC data. We discuss the workflow and the different development approaches. By making such tool available to the wider public, we expect more 3D IndoorGML models to be created and made freely available for research and development within the spatial community and beyond., Ministerio de Ciencia e Innovación | Ref. RYC2020-029193-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automating the inventory of the navigable space for pedestrians on historical sites: Towards accurate path planning

  • Treccani, D.
  • Fernández Álvarez, Antonio
  • Díaz Vilariño, Lucía
  • Adami, A.
Pedestrian mobility networks have a primary role on historical urban areas, hence knowledge of navigable space for pedestrians becomes crucial. Collection and inventory of those areas can be conducted by exploiting several techniques, including the analysis of point clouds. Existing point cloud processing techniques are typically developed for modern urban areas, which have standard layouts, and may fail when dealing with historical sites. We present a complete and automated novel method to tackle the analysis of pedestrian mobility in historic urban areas. Starting from a mobile lasers canning point cloud, the method exploits artificial intelligence to identify sidewalks and to characterize them in terms of paving material and geometric attributes. Output data are vectorized and stored in a very accurate high-definition shapefile representing the sidewalk network. It is used to automatically generate pedestrian routes. The method is tested in Sabbioneta, an Italian historic city. Paving material segmentation showed accuracy of 99.08%; urban element segmentation showed an accuracy of 88.2%; automatic data vectorization required only 1.3% of manual refinement on the generated data. Future advancements of this research will focus on testing the method on similar historical cities, using different survey techniques, and exploiting other possible uses of the generated shapefile., Ministerio de Ciencia e Innovación | Ref. RYC2020-029193-I, Agencia Estatal de Investigación | Ref. PID2019-105221RB-C43, Agencia Estatal de Investigación | Ref. PCI2022-132943, Xunta de Galicia | Ref. ED431F2022/08
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Mixed reality head mounted displays for enhanced indoor point cloud segmentation with virtual seeds

  • Navares Vázquez, Juan Carlos
  • Arias Sánchez, Pedro
  • Díaz Vilariño, Lucía
  • Balado Frías, Jesús
Mixed Reality (MR) Head Mounted Displays (HMDs) offer a hitherto underutilized set of advantages compared to conventional 3D scanners. These benefits, inherent to MR-HMDs albeit not originally intended for such applications, encompass the freedom of hand movement, hand tracking capabilities, and real-time mesh visualization. This study leverages these attributes to enhance indoor scanning process. The primary innovation lies in the conceptualization of manual-positioned MR virtual seeds for the purpose of indoor point cloud segmentation via a region-growing approach. The proposed methodology is effectively implemented using the HoloLens 2 platform. An application is designed to enable the remote placement of virtual tags based on the user’s visual focus on the MR-HMD display. This non-intrusive interface is further enriched with expedited tag saving and deletion functionalities, as well as augmented tag visualization through overlaying them on real-world objects. To assess the practicality of the proposed method, a comprehensive real-world case study spanning an area of 330 s2 is conducted. Remarkably, the survey demonstrates remarkable efficiency, with 20 virtual tags swiftly deployed, each requiring a mere 2 s for precise positioning. Subsequently, these virtual tags are employed as seeds in a region-growing algorithm for point cloud segmentation. The accuracy of virtual tag positioning is found to be exceptional, with an average error of 2.4 ± 1.8 cm. Importantly, the user experience is significantly enhanced, leading to improved seed positioning and, consequently, more accurate final segmentation results., Agencia Estatal de Investigación | Ref. RYC2022–038100-I, Agencia Estatal de Investigación | Ref. RYC2020-029193-I, Agencia Estatal de Investigación | Ref. PID2021-123475OA-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Optimal scan planning for surveying large sites with static and mobile mapping systems

  • Frías Nores, Ernesto
  • Previtali, Mattia
  • Díaz Vilariño, Lucía
  • Scaioni, Marco
  • Lorenzo Cimadevila, Henrique Remixio
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Since the last two decades, the use of laser scanners for generating accurate and dense 3D models has been rapidly growing in multiple disciplines. The reliance on human-expertise to perform an efficient scanning in terms of completeness and quality encouraged the researchers to develop strategies for carrying out an optimized and automated scan planning. Nevertheless, due to the predominant use of static terrestrial laser scanners (TLS), the most of developed methods have been focused on scan optimization by fixing standpoints on basis of static scanning. The increasing use of portable mobile laser scanning systems (MLS) enables faster non-stop acquisition which demands the planning of optimal scan trajectories. Therefore, a novel method addressing the absence of dynamic scan planning is proposed considering specific MLS constraints such as maximum acquisition time or closed-loops requirement. First, an initial analysis is carried out to determinate key-positions to reach during data acquisition. From these positions a navigable graph is generated to compute routes satisfying specific MLS constraints by a three-step process. This starts by estimating the number of routes necessary to subsequently carry out a coarse graph partition based on Kmedoids clustering. Next, a balancing algorithm was implemented to compute a balanced graph partition by node exchanging. Finally, partitions are extended by adding key nodes from their adjacent ones in order to provide a desirable overlapping between scans. The method was tested by simulating three laser scanner configurations in four indoor and outdoor real case studies. The acquisition quality of the computed scan planning was evaluated in terms of 3D completeness and point cloud density with the simulator Helios++., Xunta de Galicia | Ref. ED431F 2022/08, Agencia Estatal de Investigacion | Ref. PCI2022-132943, Agencia Estatal de Investigación | Ref. RYC2020-029193-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

3D mapping of indoor and outdoor environments using apple smart devices

  • Díaz Vilariño, Lucía
  • Tran, H.
  • Frías Nores, Ernesto
  • Balado Frías, Jesús
  • Khoshelham, Kourosh
Recent integration of LiDAR into smartphones opens up a whole new world of possibilities for 3D indoor/outdoor mapping. Although these new systems offer an unprecedent opportunity for the democratization in the use of scanning technology, data quality is lower than data captured from high-end LiDAR sensors. This paper is focused on discussing the capability of recent Apple smart devices for applications related with 3D mapping of indoor and outdoor environments. Indoor scenes are evaluated from a reconstruction perspective, and three geometric aspects (local precision, global correctness, and surface coverage) are considered using data captured in two adjacent rooms. Outdoor environments are analysed from a mobility point of view, and elements defining the physical accessibility in building entrances are considered for evaluation., Xunta de Galicia | Ref. ED481B-2019-061, Xunta de Galicia | Ref. ED431C 2020/01, Ministerio de Ciencia e Innovación | Ref. PID2019-105221RB-C43, Ministerio de Ciencia e Innovación | Ref. RYC2020-029193-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic detection of podotactile pavements in urban environments through a deep learning-based approach on MLS/HMLS point clouds

  • Tsiranidou , Elisavet
  • Treccani, Daniele
  • Adami, Andrea
  • Fernández Álvarez, Antonio
  • Díaz Vilariño, Lucía
Pedestrian accessibility is a critical dimension of sustainable and inclusive transportation systems, yet many cities lack reliable data on infrastructure features that support visually impaired users. Among these, podotactile paving plays a vital role in guiding movement and ensuring safety at intersections and transit nodes. However, tactile paving networks remain largely absent from digital transport inventories and automated mapping pipelines, limiting the ability of cities to systematically assess accessibility conditions. This paper presents a scalable approach for identifying and mapping podotactile areas from mobile and handheld laser scanning data, broadening the scope of data-driven urban modelling to include infrastructure elements critical for visually impaired pedestrians. The framework is evaluated across multiple sensing modalities and geographic contexts, demonstrating robust generalization to diverse transport environments. Across four dataset configurations from Madrid and Mantova, the proposed DeepLabV3+ model achieved podotactile F1-scores ranging from 0.83 to 0.91, with corresponding IoUs between 0.71 and 0.83. The combined Madrid–Mantova dataset reached an F1-score of 0.86 and an IoU of 0.75, highlighting strong cross-city generalization. By addressing a long-standing gap in transportation accessibility research, this study demonstrates that podotactile paving can be systematically extracted and integrated into transport datasets. The proposed approach supports scalable accessibility auditing, enhances digital transport models, and provides planners with actionable data to advance inclusive and equitable mobility., Ministerio de Ciencia e Innovación | Ref. RYC2020-029193-I, Ministerio de Ciencia, Innovación y Universidades | Ref. PID2024-157803OB-I00, Agencia Estatal de Investigación | Ref. CNS2022-135730, Xunta de Galicia | Ref. ED431F 2022/08
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Estudio comparativo termográfico mediante smartphone y cámara en edificios, Thermographic comparative study using smartphone and camera technology in buildings

  • Alonso Rodríguez, José Antonio
  • Balado Frías, Jesús
  • González Cespón, José Luís
  • Díaz Vilariño, Lucía
The cost of thermographic cameras has significantly decreased in recent years, making it an accessible and cost-effective solution for building and infrastructure inspection. With advancements in technology, low-cost thermographic devices have now become readily available in the market. These cost-effective devices offer a more convenient and accessible option for individuals and businesses to perform onsite temperature measurements. In this paper, we examine the capabilities and limitations of a thermal-equipped smartphone and the potential impact on the thermography industry by comparison with a dedicated thermographic camera. The advantages of thermography still hold true for recent low-cost devices: non-invasive inspections, quick and efficient measurements, and hidden defects easily detected. The low-cost thermal-equipped smartphone proved to be a highly maneuverable system, easy to use and with option of overlapping with real color image, what facilitates the interpretation. The low-cost system is also characterized by a larger field of view but also by a lower resolution, what makes it impracticable for measuring small objects. In any case, integration of non-destructive technologies in smartphones opens up a whole new world of possibilities for spreading the inspection of as-built buildings and infrastructures and democratizing the technology, El coste de las cámaras termográficas ha disminuido considerablemente en los últimos años, lo que las convierte en una solución accesible y rentable para la inspección de edificios e infraestructuras. Con los avances tecnológicos, los dispositivos termográficos de bajo coste ya están disponibles en el mercado. Estos dispositivos económicos ofrecen una opción más cómoda y accesible para que particulares y empresas realicen mediciones de temperatura in situ. En este artículo, examinamos las capacidades y limitaciones de un smartphone equipado con termografía y el impacto potencial en el sector de la termografía en comparación con una cámara termográfica específica. Las ventajas de la termografía siguen siendo válidas para los dispositivos recientes de bajo coste: inspecciones no invasivas, mediciones rápidas y eficaces, y defectos ocultos fácilmente detectables. El smartphone de bajo coste equipado con termografía demostró ser un sistema muy manejable, fácil de usar y con opción de superposición con imagen en color real, lo que facilita la interpretación. El sistema de bajo coste también se caracteriza por un mayor campo de visión, pero también por una menor resolución, lo que lo hace impracticable para medir objetos pequeños. En cualquier caso, la integración de tecnologías no destructivas en los smartphones abre todo un nuevo mundo de posibilidades para difundir la inspección de edificios e infraestructuras en construcción y democratizar la tecnología., Xunta de Galicia | Ref. ED481B-2019-061, Agencia Estatal de Investigación | Ref. RYC2020- 029193-I, Agencia Estatal de Investigación | Ref. PID2021-123475OAI00, Agencia Estatal de Investigación | Ref. PCI2022-132943