Pasar al contenido principal

ENFOQUE INTERDISCIPLINAR EFICIENTE PARA ANTICIPAR LA PROPAGACION DE FALLOS EN PUENTES QUE SOBREPASAN SU VIDA UTIL - INSPECCION CON TECNOLOGIAS INTEROPERABLES

PID2021-124236OB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Barcelona test for tensile strength characterisation of solid fired clay bricks

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Drougkas, Anastasios|||0000-0002-8647-9993
  • García Vicente, Tomàs
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
The study presents an adapted version of the Barcelona test for the determination of tensile strength in solid fired clay bricks. The proposed methodology involves testing 40¿mm cubic specimens, validated through an extensive experimental programme comprising 25 different brick types. These include mechanically extruded, mechanically moulded, and handmade bricks, both contemporary and collected from existing buildings. Additionally, numerical simulations using finite element analysis are employed for the validation of the methodology and the interpretation of the obtained failure mode. The study highlights the effectiveness of the proposed testing procedure in determining tensile strength for solid fired clay bricks, and includes a comparison of experimental and numerical findings, establishing a robust correlation between compressive and tensile strengths. The experimental results showed that the tensile strength of the considered bricks ranges from 0.56¿MPa to 4.37¿MPa, with a corresponding average compressive-to-tensile strength ratio of 11.1. The numerical simulations, using a 3D continuum approach and considering compressive and tensile damage mechanisms, closely match the experimental load., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021–124236OB-C32). Luca Pelà acknowledges the support received from the AGAUR - ICREA Acadèmia Research Program by the Department of Research and Universities of the Catalan Government, with grant reference number 2024 ICREA 00083., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Semantic digital twins for masonry bridges: structuring geometrical, material and assessment field data

  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Ramonell Cazador, Carlos|||0000-0003-0390-3603
  • Ventosa San Martino, Marc
  • Posada Carcamo, Hector
This paper addresses the integration of geometric and material data from masonry bridges within digital twins prepared to be part of bridge management systems. The study proposes a prototypical knowledge graph–based digital twin system focused on semantic interoperability to structure this data. The system supports storage, inspection and evaluation of masonry bridges. Different digitization strategies are encompassed together in an open, knowledge graph-based system. Information flows is exemplified from data collection to decision-making indicators. For the former, material charaterization and scan-to-BIM techniques exemplify data gathering. For the latter, the Masonry Quality Index (MQI) is used as an exemplary guide and indicator asset assessment. An open, dynamic representation of the asset can serve as a reference data structure for infrastructure managers—capable not only of aggregating but also of contextualizing diverse and critical streams of asset information, thereby transforming fragmented data into actionable intelligence. A user interface, conceived simultaneously under user-centered and developer-centered perspectives, is also presented., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021–124236OB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Laboratory and in-situ mechanical characterisation of masonry components by comparing destructive and minor destructive testing techniques

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The safeguard of existing masonry buildings requires a meticulous characterisation of the component materials (units and mortar) by using in-situ minimally intrusive techniques. This need is especially prominent in the case of heritage buildings in order to minimize their damage and alteration. This paper presents a research on some minor destructive techniques (MDT) for the in-situ evaluation of the mechanical properties of masonry components. In the research, the results derived from MDT were empirically correlated with the compressive strength obtained by using well-known destructive testing (DT) techniques executed in the laboratory. The experimental campaign focused on two different MDT techniques, namely the Pin Penetration Test (PPT) and the Helix screw Pull-out Test (HPT). The PPT is based on the measurement of the depth of penetration of a steel pin. The HPT is based on the measurement of the pull-out load necessary to extract a steel tie inserted into a hole drilled in a brick or in a mortar joint. The experimental campaign also included an evaluation of the Double Punch Test (DPT) by comparison with strength values obtained from mortar specimens prepared and tested following the standard EN 1015–11. The experimental results show a satisfactory agreement between the MDT measurements and the compressive strength obtained with DT. Although both the PPT and HPT are useful for the evaluation of the compressive strength of masonry components, the former exhibits a lower scattering in the experimental measurements., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged, Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Predicting collapse in masonry arch bridges using advanced 2D and 3D continuum FEM models

  • Hrabinova, Viktoria|||0009-0005-3005-6245
  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
Masonry arch bridges constitute a significant portion of the ageing European transport infrastructure, yet their structural behaviour remains challenging to assess due to material heterogeneity, geometric complexity, and pronounced nonlinear response. This study presents a comprehensive review of numerical modelling strategies currently employed for the analysis of masonry arch bridges, with particular emphasis on the treatment of their nonlinear behaviour. The review is complemented by an investigation of the potential collapse mechanisms and load-bearing capacity of a large-scale multi-arch, multi-ring masonry bridge laboratory specimen. Two finite element modelling approaches are proposed: a two dimensional textured continuum model, representing an intermediate strategy between detailed micromodelling and conventional continuum modelling, and a three-dimensional continuum macromodel. Both masonry and infill are modelled using a plastic damage constitutive formulation. The proposed continuum-based representation of the infill is capable of realistically reproducing its soil-like mechanical behaviour and its interaction with masonry. The numerical results are compared with limit state and kinematic analyses to identify the most probable collapse mechanisms to occur during the experimental campaign. The findings highlight the crucial role of infill and spandrel walls in the structural response of a multi-arch systems., This work was supported by the State Agency of Research (AEI) through the PONT 3 Project grant Num. PID2021-124236OB-C32 and by FI-SDUR predoctoral grants program of the Department of Research and Universities of the Catalan Government (AGAUR), with grant reference number 2023 FISDU 00082. The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through project PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021-124236OB-C32). Viktoria Hrabinova acknowledges the support received from the FI-SDUR predoctoral grants program of the Department of Research and Universities of the Catalan Government, with grant reference number 2023 FISDU 00082. Luca Pelà acknowledges the support received from the AGAUR – ICREA Academia Research Program by the Department of Research and Universities of the Catalan Government, with grant reference number 2024 ICREA 00083., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, 9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, 11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, 13 - Acció per al Clima, 13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, 9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Digital twins for bridge management

  • Lantsoght, Eva O.L.
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Vereecken, Eline
  • Bektas, Basak
  • Catbas, Necati
  • Chatzi, Eleni
  • Gül, Mustafa
  • Shirzad-ghaleroudkhani, Nima
  • Campos Matos, José A.
  • Dang, Son
  • Valenzuela, Matías
  • Zandi, Kamyab
  • Hajdin, Rade
Digital twins (DTs) are increasingly seen as a promising tool for bridge management, yet bridge owners hold diverging views on bridge digital twin (BDT) requirements, benefits, and feasibility. The International Association for Bridge Maintenance and Safety (IABMAS) Working Group on Digital Twins conducted an international survey of bridge owners and reviewed current developments in DT and case studies. The survey covered owners’ management needs, DT definitions, input/output expectations, and perceived potential. Owners see promise in DTs but want clearer guidance on minimum requirements, practical benefits, and scalable implementation strategies. Case studies illustrate their strengths in lifecycle decision-making and weaknesses tied to data fragmentation. Coherent data standards, platform interoperability, and integration with existing asset management workflows are essential. This work outlines a roadmap toward a harmonized, owner-centered BDT framework grounded in coherent standards, scalable implementation paths, and cross-sectoral collaboration., Rolando Chacon gratefully acknowledges the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI), and the European Regional Development Fund (ERDF) through the PONT3 project (“Anticipating failure propagation of aging bridges through a cost-effective interdisciplinary approach,” PID2021-124236OB-C32)., 9 - Indústria, Innovació i Infraestructura, 8 - Treball Decent i Creixement Econòmic
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

From brickyards to industrial production and the development of masonry structures in residential buildings in Barcelona during the 19th and 20th centuries

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Cornadó Bardón, Còssima|||0000-0003-0553-7176
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2025, available online at: http://www.tandfonline.com/[10.1080/15583058.2025.2483353., Brick masonry has played a key role in shaping the built environment throughout human history. Until the industrial revolution, brick manufacturing methods did not undergo significant changes. However, from the 19th century onwards, a whole series of innovations in brick manufacturing took place, which were spread throughout Europe with the help of world exhibitions. This paper proposes to study the evolution of these techniques which coincides in time with a great need for housing construction at a European level, which had to accommodate a growing urban population. A chronology of the improvements in brick manufacturing in this vibrant period is elaborated, identifying the main milestones in the improvement in brick moulding and firing techniques. Next, the case of Barcelona is presented, where this application of brick to residential construction is key to understand the type of construction and heritage environment characteristic of the city. Significant case studies are selected, which exemplify and provide precise knowledge of the evolution of brick masonry structural systems and building typologies. This enables us to understand the relationship between manufacturing techniques and construction techniques, in a structural system that is developing and growing in height., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ensayos no destructivos o moderadamente destructivos para la caracterización de los materiales componentes de la obra de fábrica de ladrillo

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Se presenta la aplicación a los componentes de la obra de fábrica (ladrillos y mortero en juntas) de un conjunto de técnicas de ensayo no destructivas (NDT) o moderadamente destructivas (MDT) para la medida experimental in situ de la resistencia a compresión del material. El estudio se orienta principalmente al caso de obra de fábrica histórica de ladrillo macizo y mortero hidráulico de cal, prestándose asimismo cierta atención al mortero de cemento Portland. Las tècnicas investigadas comprenden el ensayo penetrométrico (PPT), el ensayo de extracción de tornillo helicoidal (HPT), el esclerómetro (Rebound Hammer, RH), el ensayo velocidad del pulso ultrasónico UPV) y la técnica SonReb, basada en la combinación de estos dos últimos ensayos. Se presta también atención al ensayo de doble embolo (Double Punch Test, DPT) sobre muestras de juntas de mortero a pesar de su carácter más destructivo. Para las técnicas PPT y HPT se proponen unas correlaciones empíricas, derivadas de la ejecución de un gran número de ensayos, para correlacionar los parámetros medidos (profundidad de penetración y fuerza de extracción respectivamente) con la resistencia a compresión de ladrillos y mortero. Por otra parte, se ha comprobado que el método SonReb, basado en la integración de resultados obtenidos con esclerómetro y ultrasonidos, es aplicable, con ciertas precauciones metodológicas y utilizando una correlación específica, para la estimación de la resistencia a compresión del ladrillo cerámico macizo., Los autores agradecen la financiación obtenida del Ministerio de Ciencia e Innovación del Gobiero Español, de la Agencia Española de Investigación y de los Fondos Europeos de Desarrollo Regional (ERDF) a través del proyecto PONT3 Anticipating failure propagation of ageing bridges through a cost -effective interdisciplinary approach , con número de referencia PID2021- 124236OB -C32. Luca Pelà agradece el apoyo recibido del programa de investigación AGAUR - ICREA Acadèmia del Departamento de Investigación y Universidades de la General itat de Cataluña., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Non-destructive evaluation of compressive strength in solid clay bricks using the rebound hammer test

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Cuadros Rojas, Emerson Julio|||0000-0003-4148-848X
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International journal of architectural heritage on 23-12-2025, available online at: http://www.tandfonline.com/10.1080/15583058.2025.2592139., The paper presents the application of the Rebound Hammer Test (RHT) for the in situ evaluation of compressive strength in solid fired clay bricks in existing masonry buildings. This non-destructive testing (NDT) technique was investigated under controlled laboratory conditions to determine empirical correlations between RHT values and compressive strengths obtained through standard destructive testing (DT). The produced experimental dataset includes over 300 laboratory tests. Three categories of clay bricks were considered, based on their manufacturing process: mechanically extruded, mechanically moulded, and handmade moulded. Handmade specimens include both contemporary production and historical samples collected from two buildings in Barcelona, Spain, constructed in 1880 and 1930. The analysis employed both the Q-value and R-value provided by the Schmidt hammer. The Q-value is a dimensionless index defined as the ratio between the rebound velocity and the initial impact velocity, representing the coefficient of restitution. The R-value is the classical rebound number, defined as the mechanical rebound length of the hammer after impact. Results show clear correlations between both indices (Q and R) and the compressive strength of bricks. Findings demonstrate that the Schmidt hammer provides a consistent, practical, and low-cost tool for assessing brick strength when destructive testing is not feasible., The work was supported by the Agencia Estatal deInvestigación [PID2021-124236OB-C32]; Agència de Gestiód’Ajuts Universitaris i de Recerca [2021 FI_B 00937]., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, 11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, 9 - Indústria, Innovació i Infraestructura, 9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Toward reliable in-situ strength assessment of heritage masonry using combined NDT and MDT techniques

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
The mechanical characterisation of existing masonry structures represents a major challenge in structural assessment, particularly in heritage buildings where the extraction of samples for laboratory testing is often restricted. Reliable in-situ techniques are therefore required to estimate the mechanical properties of masonry components while preserving the integrity of the structure. This study proposes an experimental methodology for the in-situ assessment of brick masonry through the combined use of Non-Destructive Testing (NDT) and Minor Destructive Testing (MDT). The approach integrates the Rebound Hammer Test (RHT) and Ultrasonic Pulse Velocity (UPV) to estimate the compressive strength of solid clay bricks through an adapted SonReb correlation, while the Pin Penetration Test (PPT) is employed to evaluate the compressive strength of mortar joints. The methodology is applied to six case studies, including a historic wine cellar, a masonry arch bridge, a laboratory masonry arch bridge specimen, two residential buildings, and an industrial building. The results show that the combined interpretation of these techniques enables a conservative estimation of the compressive strength of masonry components and provides a practical framework for the structural assessment of existing and heritage masonry structures., The authors gratefully acknowledge the financial support provided by the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI), and the European Regional Development Fund (ERDF), through the project PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach) ref. no. PID2021-124236OB-C32. Luca Pelà acknowledges the support received from the AGAUR – ICREA Academia Research Programme, funded by the Department of Research and Universities of the Catalan Government, with grant reference number 2024 ICREA 00083., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, 11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ensayos no destructivos o moderadamente destructivos para la caracterización de los materiales componentes de la obra de fábrica de ladrillo

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
Se presenta la aplicación a los componentes de la obra de fábrica (ladrillos y mortero en juntas) de un conjunto de técnicas de ensayo no destructivas (NDT) o moderadamente destructivas (MDT) para la medida experimental in situ de la resistencia a compresión del material. El estudio se orienta principalmente al caso de obra de fábrica histórica de ladrillo macizo y mortero hidráulico de cal, prestándose asimismo cierta atención al mortero de cemento Portland. Las tècnicas investigadas comprenden el ensayo penetrométrico (PPT), el ensayo de extracción de tornillo helicoidal (HPT), el esclerómetro (Rebound Hammer, RH), el ensayo velocidad del pulso ultrasónico UPV) y la técnica SonReb, basada en la combinación de estos dos últimos ensayos. Se presta también atención al ensayo de doble embolo (Double Punch Test, DPT) sobre muestras de juntas de mortero a pesar de su carácter más destructivo. Para las técnicas PPT y HPT se proponen unas correlaciones empíricas, derivadas de la ejecución de un gran número de ensayos, para correlacionar los parámetros medidos (profundidad de penetración y fuerza de extracción respectivamente) con la resistencia a compresión de ladrillos y mortero. Por otra parte, se ha comprobado que el método SonReb, basado en la integración de resultados obtenidos con esclerómetro y ultrasonidos, es aplicable, con ciertas precauciones metodológicas y utilizando una correlación específica, para la estimación de la resistencia a compresión del ladrillo cerámico macizo., Los autores agradecen la financiación obtenida del Ministerio de Ciencia e Innovación del Gobiero Español, de la Agencia Española de Investigación y de los Fondos Europeos de Desarrollo Regional (ERDF) a través del proyecto PONT3 Anticipating failure propagation of ageing bridges through a cost -effective interdisciplinary approach , con número de referencia PID2021- 124236OB -C32. Luca Pelà agradece el apoyo recibido del programa de investigación AGAUR - ICREA Acadèmia del Departamento de Investigación y Universidades de la General itat de Cataluña., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Toward reliable in-situ strength assessment of heritage masonry using combined NDT and MDT techniques

  • Cabané Cañas, Albert
  • Roca Fabregat, Pedro
  • Pelà, Luca
The mechanical characterisation of existing masonry structures represents a major challenge in structural assessment, particularly in heritage buildings where the extraction of samples for laboratory testing is often restricted. Reliable in-situ techniques are therefore required to estimate the mechanical properties of masonry components while preserving the integrity of the structure. This study proposes an experimental methodology for the in-situ assessment of brick masonry through the combined use of Non-Destructive Testing (NDT) and Minor Destructive Testing (MDT). The approach integrates the Rebound Hammer Test (RHT) and Ultrasonic Pulse Velocity (UPV) to estimate the compressive strength of solid clay bricks through an adapted SonReb correlation, while the Pin Penetration Test (PPT) is employed to evaluate the compressive strength of mortar joints. The methodology is applied to six case studies, including a historic wine cellar, a masonry arch bridge, a laboratory masonry arch bridge specimen, two residential buildings, and an industrial building. The results show that the combined interpretation of these techniques enables a conservative estimation of the compressive strength of masonry components and provides a practical framework for the structural assessment of existing and heritage masonry structures., The authors gratefully acknowledge the financial support provided by the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI), and the European Regional Development Fund (ERDF), through the project PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach) ref. no. PID2021-124236OB-C32. Luca Pelà acknowledges the support received from the AGAUR – ICREA Academia Research Programme, funded by the Department of Research and Universities of the Catalan Government, with grant reference number 2024 ICREA 00083., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, 11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Semantic digital twins for masonry bridges: structuring geometrical, material and assessment field data

  • Chacón Flores, Rolando Antonio
  • Ramonell Cazador, Carlos
  • Ventosa San Martino, Marc
  • Posada Carcamo, Hector
This paper addresses the integration of geometric and material data from masonry bridges within digital twins prepared to be part of bridge management systems. The study proposes a prototypical knowledge graph–based digital twin system focused on semantic interoperability to structure this data. The system supports storage, inspection and evaluation of masonry bridges. Different digitization strategies are encompassed together in an open, knowledge graph-based system. Information flows is exemplified from data collection to decision-making indicators. For the former, material charaterization and scan-to-BIM techniques exemplify data gathering. For the latter, the Masonry Quality Index (MQI) is used as an exemplary guide and indicator asset assessment. An open, dynamic representation of the asset can serve as a reference data structure for infrastructure managers—capable not only of aggregating but also of contextualizing diverse and critical streams of asset information, thereby transforming fragmented data into actionable intelligence. A user interface, conceived simultaneously under user-centered and developer-centered perspectives, is also presented., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021–124236OB-C32)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Non-destructive evaluation of compressive strength in solid clay bricks using the rebound hammer test

  • Cabané Cañas, Albert
  • Cuadros Rojas, Emerson Julio
  • Roca Fabregat, Pedro
  • Pelà, Luca
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International journal of architectural heritage on 23-12-2025, available online at: http://www.tandfonline.com/10.1080/15583058.2025.2592139., The paper presents the application of the Rebound Hammer Test (RHT) for the in situ evaluation of compressive strength in solid fired clay bricks in existing masonry buildings. This non-destructive testing (NDT) technique was investigated under controlled laboratory conditions to determine empirical correlations between RHT values and compressive strengths obtained through standard destructive testing (DT). The produced experimental dataset includes over 300 laboratory tests. Three categories of clay bricks were considered, based on their manufacturing process: mechanically extruded, mechanically moulded, and handmade moulded. Handmade specimens include both contemporary production and historical samples collected from two buildings in Barcelona, Spain, constructed in 1880 and 1930. The analysis employed both the Q-value and R-value provided by the Schmidt hammer. The Q-value is a dimensionless index defined as the ratio between the rebound velocity and the initial impact velocity, representing the coefficient of restitution. The R-value is the classical rebound number, defined as the mechanical rebound length of the hammer after impact. Results show clear correlations between both indices (Q and R) and the compressive strength of bricks. Findings demonstrate that the Schmidt hammer provides a consistent, practical, and low-cost tool for assessing brick strength when destructive testing is not feasible., The work was supported by the Agencia Estatal deInvestigación [PID2021-124236OB-C32]; Agència de Gestiód’Ajuts Universitaris i de Recerca [2021 FI_B 00937]., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, 11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, 9 - Indústria, Innovació i Infraestructura, 9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Laboratory and in-situ mechanical characterisation of masonry components by comparing destructive and minor destructive testing techniques

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
The safeguard of existing masonry buildings requires a meticulous characterisation of the component materials (units and mortar) by using in-situ minimally intrusive techniques. This need is especially prominent in the case of heritage buildings in order to minimize their damage and alteration. This paper presents a research on some minor destructive techniques (MDT) for the in-situ evaluation of the mechanical properties of masonry components. In the research, the results derived from MDT were empirically correlated with the compressive strength obtained by using well-known destructive testing (DT) techniques executed in the laboratory. The experimental campaign focused on two different MDT techniques, namely the Pin Penetration Test (PPT) and the Helix screw Pull-out Test (HPT). The PPT is based on the measurement of the depth of penetration of a steel pin. The HPT is based on the measurement of the pull-out load necessary to extract a steel tie inserted into a hole drilled in a brick or in a mortar joint. The experimental campaign also included an evaluation of the Double Punch Test (DPT) by comparison with strength values obtained from mortar specimens prepared and tested following the standard EN 1015–11. The experimental results show a satisfactory agreement between the MDT measurements and the compressive strength obtained with DT. Although both the PPT and HPT are useful for the evaluation of the compressive strength of masonry components, the former exhibits a lower scattering in the experimental measurements., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged, Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

From brickyards to industrial production and the development of masonry structures in residential buildings in Barcelona during the 19th and 20th centuries

  • Cabané Cañas, Albert
  • Cornadó Bardón, Còssima
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2025, available online at: http://www.tandfonline.com/[10.1080/15583058.2025.2483353., Brick masonry has played a key role in shaping the built environment throughout human history. Until the industrial revolution, brick manufacturing methods did not undergo significant changes. However, from the 19th century onwards, a whole series of innovations in brick manufacturing took place, which were spread throughout Europe with the help of world exhibitions. This paper proposes to study the evolution of these techniques which coincides in time with a great need for housing construction at a European level, which had to accommodate a growing urban population. A chronology of the improvements in brick manufacturing in this vibrant period is elaborated, identifying the main milestones in the improvement in brick moulding and firing techniques. Next, the case of Barcelona is presented, where this application of brick to residential construction is key to understand the type of construction and heritage environment characteristic of the city. Significant case studies are selected, which exemplify and provide precise knowledge of the evolution of brick masonry structural systems and building typologies. This enables us to understand the relationship between manufacturing techniques and construction techniques, in a structural system that is developing and growing in height., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predicting collapse in masonry arch bridges using advanced 2D and 3D continuum FEM models

  • Hrabinova, Viktoria
  • Garcia Ramonda, Larisa
  • Roca Fabregat, Pedro
  • Pelà, Luca
Masonry arch bridges constitute a significant portion of the ageing European transport infrastructure, yet their structural behaviour remains challenging to assess due to material heterogeneity, geometric complexity, and pronounced nonlinear response. This study presents a comprehensive review of numerical modelling strategies currently employed for the analysis of masonry arch bridges, with particular emphasis on the treatment of their nonlinear behaviour. The review is complemented by an investigation of the potential collapse mechanisms and load-bearing capacity of a large-scale multi-arch, multi-ring masonry bridge laboratory specimen. Two finite element modelling approaches are proposed: a two dimensional textured continuum model, representing an intermediate strategy between detailed micromodelling and conventional continuum modelling, and a three-dimensional continuum macromodel. Both masonry and infill are modelled using a plastic damage constitutive formulation. The proposed continuum-based representation of the infill is capable of realistically reproducing its soil-like mechanical behaviour and its interaction with masonry. The numerical results are compared with limit state and kinematic analyses to identify the most probable collapse mechanisms to occur during the experimental campaign. The findings highlight the crucial role of infill and spandrel walls in the structural response of a multi-arch systems., This work was supported by the State Agency of Research (AEI) through the PONT 3 Project grant Num. PID2021-124236OB-C32 and by FI-SDUR predoctoral grants program of the Department of Research and Universities of the Catalan Government (AGAUR), with grant reference number 2023 FISDU 00082. The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through project PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021-124236OB-C32). Viktoria Hrabinova acknowledges the support received from the FI-SDUR predoctoral grants program of the Department of Research and Universities of the Catalan Government, with grant reference number 2023 FISDU 00082. Luca Pelà acknowledges the support received from the AGAUR – ICREA Academia Research Program by the Department of Research and Universities of the Catalan Government, with grant reference number 2024 ICREA 00083., Peer Reviewed, 11 - Ciutats i Comunitats Sostenibles, 9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, 11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, 13 - Acció per al Clima, 13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, 9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Barcelona test for tensile strength characterisation of solid fired clay bricks

  • Cabané Cañas, Albert
  • Drougkas, Anastasios
  • García Vicente, Tomàs
  • Roca Fabregat, Pedro
  • Pelà, Luca
The study presents an adapted version of the Barcelona test for the determination of tensile strength in solid fired clay bricks. The proposed methodology involves testing 40¿mm cubic specimens, validated through an extensive experimental programme comprising 25 different brick types. These include mechanically extruded, mechanically moulded, and handmade bricks, both contemporary and collected from existing buildings. Additionally, numerical simulations using finite element analysis are employed for the validation of the methodology and the interpretation of the obtained failure mode. The study highlights the effectiveness of the proposed testing procedure in determining tensile strength for solid fired clay bricks, and includes a comparison of experimental and numerical findings, establishing a robust correlation between compressive and tensile strengths. The experimental results showed that the tensile strength of the considered bricks ranges from 0.56¿MPa to 4.37¿MPa, with a corresponding average compressive-to-tensile strength ratio of 11.1. The numerical simulations, using a 3D continuum approach and considering compressive and tensile damage mechanisms, closely match the experimental load., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021–124236OB-C32). Luca Pelà acknowledges the support received from the AGAUR - ICREA Acadèmia Research Program by the Department of Research and Universities of the Catalan Government, with grant reference number 2024 ICREA 00083., Peer Reviewed, Postprint (published version)