Pasar al contenido principal

EVALUACION MULTINIVEL DE LA VULNERABILIDADD SISMICA Y MITIGACION DE RIESGO DE EDIFICIOS DE OBRA DE FABRICA EN CENTROS URBANOS HISTORICOS RESILIENTES

RTI2018-099589-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 116
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Risk Index for the Structural Diagnosis of Masonry Heritage (RISDiMaH)

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Luca Pelà
  • Climent Molins
[EN] Experts responsible for the safety evaluation of unique masonry heritage structures usually need to weigh information from various diagnosis activities before deciding the best course of action for preservation. Typical sources of valuable information are historical and in situ surveys and inspections, minor and non-destructive testing, structural health monitoring, and structural analysis, among others. Due to the complexity of the problem and singular aspects of monuments, these decisions are challenging and often made solely on the basis of expert judgement. A systematic risk assessment procedure is proposed involving the computation of two indices to facilitate the decision-making process: an index related to the estimated risk of damage, and another to the uncertainty behind this estimation. Results from applying the procedure to several case studies are provided to demonstrate its usefulness., This research has received the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The corresponding author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the financial support of his predoctoral grant. The authors would like to thank Professor Pere Roca for providing diagnostic reports of several masonry heritage structures for this research. Besides, the authors are also grateful to Irene Josa for coming up with the acronym RISDiMaH.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust estimation of axial loads sustained by tie-rods in historical structures using Artificial Neural Networks

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca
  • Molins, Climent
[EN] Widely used simplified analytical methods for estimating the tensile force in tie-rods are clearly not applicable when they contain significant discontinuities or irregularities. A common example for which this fact becomes relevant in practice is the use of connectors to unify historical ties consisting of several segments. To address this challenge, a robust hybrid methodology is proposed which can be applied to any historical tie by employing a data-driven approach to a dataset generated using the finite element method. The methodology is applied to a real case study involving two historical ties., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Servei del Patrimoni Arquitectònic of the Generalitat de Catalunya through a project (managed by the City Council of Sant Cugat) aimed at monitoring the church of the Monastery of Sant Cugat (grant number C-10764); the Ministry of Science, Innovation and Universities of the Spanish Government and the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres) (grant number RTI2018-099589-B-I00); and the AGAUR agency of the Generalitat de Catalunya in the form of the predoctoral grant of the first author.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data analysis using ARX models applied to static structural health monitoring of the Monastery of Sant Cugat

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The church of the monastery of Sant Cugat close to Barcelona is a medieval construction characterized by a complex structural behaviour stemming from the interaction among various structural elements built over different periods. Despite having survived for several centuries, such structures are often affected by slow irreversible deterioration mechanisms that can jeopardise their stability in the future. In order to identify such mechanisms at an early stage, and to better understand the cause of visible pathologies, a static structural health monitoring (SHM) system was installed in the church since 2017. Although this monitoring strategy, aimed at the continuous measurement of key slow-varying parameters, has been used successfully in the past to facilitate the diagnosis of this structural typology, the interpretation of data collected by such systems remains a challenging task. One of the main reasons for this is the fact that many monitored damage and deformation features are sensitive to changes caused by environmental conditions. To address this issue, this paper presents the application of a fully automated data analysis procedure to the records collected from the SHM system installed in the church of the monastery of Sant Cugat. The procedure consists of two parts. The first relies on the identification of models that comprehend an Auto-Regressive output and an eXogenous input (ARX) to represent the dynamics of each monitored response using suitable environmental parameters as predictors. The identified models are then used to estimate filtered evolution rates. The second part of the procedure involves classifying each monitored response into pre-defined evolution states based on outcomes from the first part. The main results from the application to the case of the church of the monastery of Sant Cugat are presented and the implications for the diagnosis of the structure are discussed., This research has received financial support from the City Council of Sant Cugat (Ajuntament de Sant Cugat) through a project aimed at monitoring the structure of the church of the monastery of Sant Cugat (ref. num. C-10764). The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). Support from the AGAUR agency of the Generalitat de Catalunya and the European Social Fund, in the form of a pre-doctoral grant awarded to the corresponding author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Anisotropy and compressive strength evaluation of solid fired clay bricks by testing small specimens

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
A study is presented on the use of a non-standard 40 × 40 × 40 mm3 specimen for the experimental measurement of the compressive strength of solid fired clay bricks extracted from existing masonry buildings. The viability of such specimen has been assessed by comparison with experimental results obtained with the standard 100 × 100 × 40 mm3 specimen. The use of the non-standard 40 × 40 × 40 mm3 has two main advantages. First, it significantly reduces the volume of sampled material, which can be severely restrained in architectural heritage buildings. Second, it allows carrying out tests in the three brick dimensions (length, width and thickness), and therefore investigating the anisotropy that clay bricks can exhibit depending of their manufacturing process. The experimental campaign has focused on three different types of solid fired clay bricks, namely mechanically extruded, hydraulic press moulded, and handmade units, with a total amount of 461 specimens. Using the mentioned small cubic specimen, a detailed research on the compressive strength and the anisotropy of different solid clay brick types has been carried out by applying a statistical approach. The experimental results and the statistical processing have shown that the proposed specimen can be utilized for a reliable estimation of the compressive strengths along the three main directions of solid fired clay bricks., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bending behaviour of sandwich panels of vegetal fabric reinforced cementitious matrix: experimental test and numerical simulation

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Martínez Martínez, Borja|||0000-0002-4398-1983
Sandwich panels represent a lightweight solution with additional properties as insulation compared to traditional solutions used for building enclosures. In this study, a technology based on vegetal FRCM (fabric reinforced cementitious matrix) provides an economical, sustainable and competitive solution. The research introduces a composite design made of different vegetal fabrics (hemp and sisal) and mortar as skins of the sandwich and a core of extruded polystyrene. Both composite skins were connected with different types of connectors including vegetal designs. An experimental campaign of sandwich panels included four-point bending tests and a later development of numerical models capable of reproducing the experimental results. The results obtained show that the use of vegetal fabrics and connectors were as competitive for the development of effective composite action as synthetic fabrics (glass fiber)., This study has been partially carried out within the project ‘‘Desarrollo de paneles industriales prefabricados tipo sándwich con materiales compuestos de matriz cementicia (FRCM) y con digitalizacion ´ BIM incorporada. PANELPLUS’’, funded by the Spanish Ministry of Science, Innovation and University through the Torres Quevedo program. The materials support of Sika AG and Mapei Spain S.A. is acknowledged. Authors want to thanks the research project SEVERUS (RTI2018- 099589-B-I00) of the Spanish Research Agency. The contribution of PhD. Lluis Gil is also acknowledged. Second author is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry

  • Segura Domingo, Jorge|||0000-0002-6763-1064
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Cabané Cañas, Albert|||0000-0002-5858-2563
This paper presents the results of an experimental programme about the evaluation of the size effect on the compressive behaviour of cylindrical samples of existing masonry. The study focuses on the in-situ coring and experimental testing of core specimens with 150 mm and 90 mm diameter. The 150 mm cylinder, recurrent in minor destructive evaluation of the compressive strength of existing masonry, includes four brick pieces, two mortar beds and one head joint. The 90 mm specimen includes one mortar bed and two segments of brick, and inflicts less damage on the inspected structural member due to its lower invasivity. The experimental research investigates the size effect on four different types of clay brick masonry. The first type was built in the laboratory using historical-like materials. The other three types of masonry belong to structural walls of existing historical buildings. The combination of experimental results from laboratory controlled materials and existing historical members shows that the size of the cylindrical specimen has regular effect on the compressive strength and the Young’s modulus. The consistent relationship found between the compressive strengths of the 150 mm and 90 mm core samples allows the use of the latter specimen for a more respectful inspection of existing structural masonry., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

In-plane shear behaviour by diagonal compression testing of brick masonry walls strengthened with basalt and steel textile reinforced mortars

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
This paper presents an experimental study of the structural behaviour of masonry walls retrofitted with Textile Reinforced Mortar (TRM) to improve their in-plane shear strength and deformation capacity. The experimental programme consists in diagonal compression testing of ten specimens of clay brick and lime mortar masonry retrofitted with three different TRM systems: i) continuous bidirectional grids of basalt TRM, ii) discrete bands of unidirectional steel TRM and iii) continuous basalt TRM on the wall’s inner face and bed joints structural repointing with near surface mounted helical stainless steel bars on the wall’s outer face. Two of the specimens were tested two times, i.e. in the unreinforced condition and subsequently in the repaired configuration including basalt TRM retrofitting. The experimental results show that the adopted TRM solutions produce a beneficial increase of shear resistance and ductility, making them suitable for seismic retrofitting and post-earthquake repair., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental and numerical analysis of the cyclic in-plane behaviour of retrofitted masonry walls

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
This paper presents an experimental study focused on the mechanical performance of retrofitted brick masonry walls under in-plane cyclic shear test. The specimens were tested in two configurations: unreinforced and retrofitted with Basalt Textile Reinforced Mortar (BTRM). The experimental programme aimed to study the suitability and efficiency of the solutions to increase the mechanical strength, the displacement capacity and the dissipation capacity. In addition, an advanced numerical model was used for the analysis of the strengthened walls subjected to shear compression tests. The masonry was modelled as a continuous homogeneous macro model in which the nonlinear behaviour was described with a constitute model based on Continuum-Damage mechanics. The adopted model was able to capture correctly the main aspects of the observed experimental behaviour, such as initial stiffness, failure mechanism, and loadbearing capacity. The numerical results were compared with the experimental outcome to investigate the ability of the model to describe the in-plane behaviour of brick masonry walls retrofitted with BTRM., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project “Seismic Strengthening of Masonry walls” A-01278. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Laboratory and in-situ mechanical characterisation of masonry components by comparing destructive and minor destructive testing techniques

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The safeguard of existing masonry buildings requires a meticulous characterisation of the component materials (units and mortar) by using in-situ minimally intrusive techniques. This need is especially prominent in the case of heritage buildings in order to minimize their damage and alteration. This paper presents a research on some minor destructive techniques (MDT) for the in-situ evaluation of the mechanical properties of masonry components. In the research, the results derived from MDT were empirically correlated with the compressive strength obtained by using well-known destructive testing (DT) techniques executed in the laboratory. The experimental campaign focused on two different MDT techniques, namely the Pin Penetration Test (PPT) and the Helix screw Pull-out Test (HPT). The PPT is based on the measurement of the depth of penetration of a steel pin. The HPT is based on the measurement of the pull-out load necessary to extract a steel tie inserted into a hole drilled in a brick or in a mortar joint. The experimental campaign also included an evaluation of the Double Punch Test (DPT) by comparison with strength values obtained from mortar specimens prepared and tested following the standard EN 1015–11. The experimental results show a satisfactory agreement between the MDT measurements and the compressive strength obtained with DT. Although both the PPT and HPT are useful for the evaluation of the compressive strength of masonry components, the former exhibits a lower scattering in the experimental measurements., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged, Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental testing of solid fired clay bricks in compression: comparison of different bearing surface treatments

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The conservation and preservation of heritage historical masonry buildings requires the evaluation of their structural capacity against gravity and horizontal actions. This evaluation is normally based on meaningful mechanical properties such as the masonry compressive strength. The compressive strength of masonry is highly dependent on the compressive strength of the components. Specifically the experimental assessment of compressive strength in solid fired clay bricks has long been a topic of debate, with various standards describing different specimen shapes, sizes and bearing surfaces treatment. There is an evi-dent lack of consensus on common criteria and procedures for brick mechanical testing. This research focuses on evaluating the compressive strength of two types of solid clay bricks, corresponding to mechanically extruded ones and traditionally handmade bricks by moulding. The reference standards considered are the Amer-ican ASTM C67, the European EN 772-1, the Australian AS/NZS 4456:4, and the Canadian CAN/CSA A82. These standards encompass different specimen shapes, such as whole or half bricks and 100 × 100 × 40 mm3 specimens subjected to various bearing surface treatments, including grinding, capping with cement mortar or gypsum plaster, and placing with birch plywood or fiberboard. Addi-tionally, a novel bearing surface treatment involving the placement of two oiled PTFE sheets on each specimen loading surface is proposed. The experimental campaign focuses on evaluating the compressive strength based on a comparison of the results obtained using the reference standards. The results highlight and quantify the variations in compressive strength obtained for the same type of solid fired clay brick when different reference standards are considered. In addition, the results reveal the potential of using PTFE sheets as a promising possibility for brick mechanical characterization. The PTFE sheets cause very low friction at the specimen-platen surface and therefore allow the measurement of strength values not influenced by the specimen shape., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary ap-proach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evalu-ation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Cyclic shear-compression testing of brick masonry walls repaired and retrofitted with basalt textile reinforced mortar

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
This paper reports an experimental programme on masonry walls composed of handmade solid clay brick and hydraulic lime mortar. Reversed cyclic shear compression tests were carried out on the walls in three different configurations: unreinforced, repaired and retrofitted, and just retrofitted. Damaged walls were repaired and retrofitted with Basalt Textile Reinforced Mortar (B TRM) and tested again to investigate the recovery of strength, stiffness and the improvement in drift capacity. The repair consisted in filling the open cracks and replacing the damaged bricks by following the so-called ‘‘scuci-cuci’’ technique. The just retrofitted configuration consisted of externally bonded B-TRM on undamaged walls. The B-TRM system comprised continuous bidirectional grids of basalt fibre embedded in hydraulic lime mortar on both surfaces of the walls. The experimental results showed the suitability of the proposed solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research results highlighted the capacity of the proposed repair technique to reinforce damaged walls and the effectiveness of the investigated B-TRM system in increasing the resistance, the ductility, and the energy dissipation of unreinforced clay brick masonry. In addition, the results allowed a better understanding of the behaviour of masonry walls subjected to cyclic horizontal displacement in terms of failure mechanism and displacement capacities., The authors gratefully acknowledge the financial support from the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities of the Spanish Government, as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The reinforcement systems and construction of the specimens for the experimental programme have been funded by Kerakoll Spa through the RTD project “Seismic Strengthening of Masonry Walls” (Ref. num. A-01278). The authors wish to thank Paolo Casadei, José Luis Sanchez and José Dobón from Kerakoll Spa for their involvement and support. The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Cylindrical samples of brick masonry with aerial lime mortar under compression: experimental and numerical study

  • Pelà, Luca|||0000-0001-7760-8290
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This research presents an experimental and numerical study focusing on the compression test of cylindrical samples core drilled from existing masonry walls. This method is suitable for the minor destructive assessment of the mechanical properties of historical masonry, like that composed of aerial lime mortar joints and solid clay bricks. This particular material combination, frequently found in the vast majority of the built cultural heritage, was utilized to build representative specimens that were stored in the laboratory for one year until their testing. Cylindrical samples of 150 mm diameter were extracted from the masonry walls by using a dry core-drilling procedure, and then regularized to be tested under compression in the laboratory. A comparison is presented between the experimental results on cylindrical samples and those obtained from standard compression tests on prismatic samples consisting in stack bond prisms. Numerical simulations by finite element micro-modelling of the compression tests on the core samples were carried out to investigate the experimental behaviour of the specimens and evaluate the compressive strength of the material from this nonstandard technique. The combined experimental and numerical study allows the assessment of important mechanical parameters for the compressive characterisation of masonry composed of aerial lime mortar joints and solid clay bricks., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental comparison of two testing setups for characterizing the shear mechanical properties of masonry

  • Segura Domingo, Jorge|||0000-0002-6763-1064
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Mendizábal Dinucci, Virginia Dolores|||0000-0003-0919-801X
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Gil Espert, Lluís|||0000-0002-2007-4846
The prediction of the structural capacity of masonry buildings against lateral loads requires an accurate characterization of the masonry strength and the general response under shear stresses. The experimental determination of shear strength parameters typically relies on shear tests on wallettes, or on standard triplets. Aiming to avoid the behavioural interpretation problems related with the existence of two mortar joints in triplets, this paper investigates the alternative possibility of testing simple couplet specimens. A direct experimental comparison was established with tests on the two specimen configurations (triplets and couplets) performed on two different types of masonry, both characterized by low strength mortars (hydraulic lime and cement based). The obtained results include the evaluation of Mohr-Coulomb parameters, residual shear strengths, second mode fracture energy, and secant shear modulus. The findings point out that couplets yield consistent experimental results and provide systematically higher estimations of all parameters compared to triplets., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged. Support from Universitat Politècnica de Catalunya through a predoctoral grant awarded to the third author is also acknowledged. The authors wish to thank Paolo Casadei, José Luis Sánchez and Patricio Contreras from KERAKOLL for providing part of the materials used in the experimental campaign., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Seismic vulnerability index method for hybrid timber–masonry structures: numerical calibration and application to the city of Valparaíso, Chile

  • Jiménez Ramírez, María Belén
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
This paper presents a procedure for the extension of the Vulnerability Index Method (VIM) to the seismic assessment of hybrid timber–masonry buildings. The research is based on the execution of a detailed numerical study of this peculiar structural typology to identify the classes and calibrate the scores assigned to influential vulnerability parameters, namely the irregularities of the structural system, the type of floor, and the state of conservation of the building. A sensitivity analysis of the seismic capacity is developed by performing pushover analyses with several models corresponding to realistic variations of each structural or material parameter. The seismic performance of the buildings is analysed by the N2 Method. This methodology leads to the proposal of a new calibrated vulnerability index form that, together with those existing in literature for masonry and reinforced concrete structures, can be used for the seismic assessment of heterogeneous urban environments. The proposed VIM is applied to the assessment of 111 buildings located in the historical centre of the city of Valparaíso, Chile. The computation of the vulnerability index allows a fast evaluation of the seismic vulnerability of the urban buildings. The results plotted on vulnerability maps built within a GIS environment allows the assessment of the impact of potential collapses on the serviceability of two emergency evacuation routes included in the civil protection plans of the city., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The first author gratefully acknowledges the ELARCH project (Euro-Latin America partnership in natural Risk Mitigation and protection of the Cultural Heritage, reference number 552129-EM-1-2014-1-IT- ERASMUS MUNDUS EMA21), funded by the European Commission, for the financial support of her predoctoral grant., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.3 - Per a 2030, augmentar la urbanització inclusiva i sostenible, així com la capacitat de planificar i gestionar de manera participativa, integrada i sostenible els assentaments humans a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.c - Proporcionar suport als països menys avançats, incloent una assistència financera i tècnica, perquè puguin construir edificis sostenibles i resilients utilitzant materials locals, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.2 - Incorporar mesures relatives al canvi climàtic en les polítiques, les estratègies i els plans nacionals, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Machine-learning model for the determination of macro-scale masonry properties based on a virtual laboratory at micro-scale

  • Kalkbrenner, Philip
  • Pelà, Luca|||0000-0001-7760-8290
  • Rossi, Riccardo|||0000-0003-0528-7074
Cutting-edge methods in the computational analysis of structures have been developed over the last decades. Such modern tools are helpful to assess the safety of existing buildings. Multi-scale techniques have been proposed to combine the accuracy of micro-modelling and the computational efficiency of macro-modelling. Machine-learning tools have been utilized successfully to train specific models by feeding big source data from different fields, e.g. autonomous driving, face recognition, etc. This research proposes a continuous nonlinear material law that can reproduce data from micro-scale analysis. The proposed method is based on a machine-learning tool that links the two scales of the analysis by training a macro-model smeared damage constitutive law through benchmark data from numerical tests derived from micro-models., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental assessment of shear response of brick masonry retrofitted with TRM

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
As one of the main historical construction materials, masonry is abundant among the architectural heritage of earthquake-prone areas of the Mediterranean countries. Earthquake mitigation approaches are now focusing on strengthening solutions based on compatible and environmentally friendly repair materials. These solutions should efficiently improve the in-plane lateral strength and displacement capacity, which are the two most significant parameters considered in the seismic assessment of masonry buildings. This paper reports an experimental programme on masonry walls composed of handmade solid clay brick and hydraulic lime mortar, a recurrent typology for historical buildings. Tests under cyclic in-plane forces were carried out on unreinforced and retrofitted walls. The unreinforced walls were repaired and retrofitted after being damaged in the first test and were then tested again to investigate the recovery of strength. The repair consisted in filling the open cracks and replacing the damaged bricks by following the so-called “scuci-cuci” technique. The retrofitting consisted of externally bonded textile reinforced mortar (TRM). The investigated TRM system was a continuous bidirectional grid of basalt embedded in hydraulic lime mortar. The experimental results show the suitability of the proposed solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research results highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry. In addition, the results allow a better understanding of the behaviour of masonry walls subjected to cyclic horizontal displacement., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Validation of non-linear equivalent-frame models for irregular masonry walls

  • Camata, Guido
  • Marano, Corrado
  • Sepe, Vincenzo
  • Spacone, Enrico
  • Siano, Rossella
  • Petracca, Massimo
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
This article compares the results obtained from the analyses of seven two-story masonry walls with an asymmetric arrangement of the openings. The walls are modelled with finite elements detailed micromodels and equivalent frame models. The equivalent frame model reliability is evaluated by comparing the results obtained with the two modelling strategies assuming the detailed micromodel’s results as reference. Namely, the equivalent frame models of the walls, subjected to nonlinear static analyses, were developed in Scientific Toolkit for OpenSees (STKO) and the OpenSees framework using a macroelement, widely accepted by the literature. The macroelement is based on the idealization of the equivalent frame model with fiber modeling of wall panels to capture bending behavior and a phenomenological law to describe shear behavior. It also provides a model for comparison and validation able to correctly describe the nonlinear behavior of fragile materials that exhibit softening in the response. The micromodeling approach was used as the reference as it is particularly efficient from a computation point of view. The numerical models were validated by comparing pseudo-static experimental tests present in the literature concerning walls with a symmetric arrangement of openings. After the preliminary calibration, the numerical comparisons of the irregular walls generally demonstrate a good correspondence between the equivalent frame model and finite element results. The most relevant differences arise for the walls with masonry panels that exhibit a mixed compression-shear damage mechanism because the simplified frame model cannot capture both behaviors, as it privileges the mechanism that activates first. The differences between the maximum shears, however, range from approximately 1% to 12%., The present research has received financial support from the University “G. D’Annunzio” of Chieti-Pescara and from the ReLUIS program 2014-2021. The last two authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analytical approach and numerical simulation of reinforced concrete beams strengthened with different frcm systems

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Escrig Pérez, Christian|||0000-0002-2412-007X
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Fabric-reinforced cementitious matrices (FRCMs) are a novel composite material for strengthening structures. Fabric contributes to tying cross-sections under tensile stress. The complexity of the interfaces between the fabric and the matrix does not allow having a simple and accurate model that enables practitioners to perform feasible calculations. This work developed an analytical approach and a numerical simulation based on the reduction of FRCMs’ strength capabilities under tensile stress states. The concept of effective strength was estimated for different types of fabrics (basalt, carbon, glass, poly p-phenylene benzobisoxazole (PBO), and steel) from experimental evidence. The proposed models calculate the ultimate bending moment for reinforced concrete (RC) structures strengthened with FRCMs. The numerical models performed simulations that reproduced the moment–deflection curves of the different tested beams. Steel fabric showed the highest contribution to strength (78%), while PBO performed the worst (6%). Basalt and carbon showed irregular contributions., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centers, ref. num. RTI2018-099589-B-I00). The third author is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Influence of recycled limestone filler additions on the mechanical behaviour of commercial premixed hydraulic lime based mortars

  • Segura Domingo, Jorge|||0000-0002-6763-1064
  • Aponte Hernández, Diego Fernando|||0000-0001-5737-7819
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This paper presents an experimental programme aimed at investigating the use of limestone filler additions to modify the mechanical properties of commercial premixed hydraulic lime based mortars. The influence of adding recycled limestone filler was evaluated from the mechanical point of view, i.e. by comparing the experimental compressive and flexural strengths of five different mortar mixes with variable filler contents. The comparison of results shows that, up to a certain amount, the addition of filler provides an improvement of the mortar’s mechanical properties. Beyond this optimum limit, strengths tend to decrease and eventually stabilize. Hence, mortars tested as part of this experimental campaign covered a range of strengths. Consequently, adding limestone filler can serve to adapt the applicability of hydraulic lime mortars to different practical applications, from the conservation of historical buildings to laboratory research on masonry., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estudio experimental de soluciones basadas en TRM/SRG y su aplicación a casos reales

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Sánchez Martínez, José Luis
  • Cobo, Juan
  • Soria, Miguel Ángel
  • Castellano, Miguel Ángel
El presente trabajo se centra en la caracterización experimental de materiales innovadores basados en la tecnología Textile Reinforced Mortar (TRM) y Steel Reinforced Grout (SRG) para su uso como refuerzo estructural para mejorar la resistencia en el plano de muros portantes de obra fábrica de ladrillo en edificios existentes. El programa experimental consistió en la construcción de 12 muros de doble hoja de ladrillo macizo de arcilla hechos a mano y juntas de mortero de baja resistencia de cal hidráulica, una tipología recurrente en los edificios históricos de los países mediterráneos. Los muros se ensayaron en dos configuraciones: no reforzadas y reforzadas. Los muros fueron reforzados mediante TRM con malla basalto de baja densidad (LDB) y SRG con acero de ultra alta resistencia de baja densidad (LDS), colocados superficialmente y con una configuración simétrica. De los 12 muros, 6 fueron ensayados mediante compresión diagonal y 6 mediante el ensayo de corte y compresión. Los resultados de la investigación ponen en relieve la eficacia de las soluciones de refuerzo investigados para aumentar la resistencia y la ductilidad de la obra de fábrica de ladrillo., Los autores agradecen el apoyo financiero del Ministerio de Ciencia, Innovación y Universidades (MCIU) del Gobierno de España, de la Agencia Estatal de Investigación (AEI) y del Fondo Europeo de Desarrollo Regional (FEDER) a través del proyecto SEVERUS ("Evaluación multinivel de la vulnerabilidad sísmica y mitigación del riesgo de edificios de mampostería en centros urbanos históricos resilientes", ref. num. RTI2018-099589-BI00), y de Kerakoll Ibérica S.A. a través del proyecto de RTD A-01217. También se agradece el apoyo de la Secretaria d'Universitats i Investigació de la Generalitat de Catalunya a través de una beca predoctoral concedida al primer autor., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental and numerical insights on the diagonal compression test for the shear characterisation of masonry

  • Segura Domingo, Jorge|||0000-0002-6763-1064
  • Pelà, Luca|||0000-0001-7760-8290
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The masonry tensile strength and shear modulus play a key role in the definition of the shear capacity of masonry structures. These properties are often determined experimentally by means of the diagonal compression test on square walls, which is regulated by the ASTM E519 standard. In spite of its wide use, the interpretation of the test is still controversial and no universal criterion exists on how to derive the masonry mechanical properties from the wall overall strength. Aiming to contribute in the improvement of the test’s reliability and interpretation, this paper presents an investigation on the use of the diagonal compression test to characterize the shear properties of masonry. First, an experimental campaign on brickwork walls is described. The walls were built in laboratory in Flemish bond, a pattern that has been scarcely investigated in the available research studies on this type of test. Second, an advanced numerical model is used for the analysis of walls subjected to the diagonal compression test. The adopted numerical model, enhanced by a crack-tracking algorithm to reproduce accurately the tensile damage localization, constitutes a very useful and powerful tool to interpret correctly the behaviour during the test. Finite element analysis was executed to interpret the walls’ response in the linear and nonlinear ranges with models properly calibrated by comparison with the experimental results. As a result, a criterion was determined for the calculation of the tensile strength from the outcomes of the diagonal compression test. A sensitivity analysis was carried out with regard to the most influent material properties of the material, the geometrical dimensions of the panel, and the loading conditions of the testing setup. The findings of this research were finally applied and validated by means of simulations of diagonal compression tests from eight experimental campaigns performed by other authors on different masonry typologies., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged. The authors wish to thank Paolo Casadei, José Luis Sánchez and Patricio Contreras from KERAKOLL for providing part of the materials used in the experimental campaign. The authors would like also to acknowledge Guido Camata for the fruitful discussions, and Larisa Garcia-Ramonda for the collaboration during the execution of the tests., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Matrix and fabric contribution on the tensile behaviour of fabric reinforced cementitious matrix composites

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Castellazzi, G.
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Fabric reinforced cementitious matrix (FRCM) are a type of sustainable materials for structures strengthening and envisaging to develop new construction solutions. However, the wide range of possible combinations of fabric and cementitious matrixes makes it necessary to study the particular contribution of mortar and fabric in the composite action of the FRCM. In this line, this study presents the experimental, analytical and numerical evaluation of the tensile behaviour of FRCM composites. 85 FRCM specimens of different thicknesses were manufactured, with one or two embedded fabrics of different type of fibres and geometry. Fabrics made of coated vegetal fibres were also considered to be compared with commercial fabrics of coated synthetic fibres. The results show a significant increase of the ultimate tensile strength with the increase of the FRCM thickness due to a residual contribution of the mortar after the cracking stage. The analytical model was effective for the cases that showed a cracking stabilization stage. However, the numerical model allows a closer approximation to experimental results because of considering the mortar contribution in the post-cracking stage., This study has been partially financed by the “European Union – NextGenerationEU”, through the Margarita Salas program, from the Spanish Ministry of Universities. The materials support of Sika AG and Mapei Spain S.A. is acknowledged. Authors want to thanks the research project SEVERUS (RTI2018- 099589-B-I00) of the Spanish Research Agency. Third author is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental cyclic behaviour of shear masonry walls reinforced with single and double layered Steel Reinforced Grout

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
Recent research on the mechanical characterisation of Steel Reinforced Grout (SRG) has highlighted its excellent performance as strengthening solutions for masonry structures. Using SRG with limited fabric density ensures a good textile-matrix interlocking, preventing at the same time the failure due to slippage or debonding from the substrate. This paper presents an experimental investigation on the use of SRG as in-plane strengthening solution for shear masonry walls composed of handmade solid clay brick and hydraulic lime mortar. Cyclic shear compression tests were carried out on walls strengthened with SRG comprising low density steel sheets (LDS). The SRG was applied on both faces of the walls with a strip configuration, using one and two layers of LDS. The experimental programme aimed to study the influence of the number of textile layers on the in-plane response of strengthened masonry walls in terms of failure mechanism, load-bearing capacity, energy dissipation, and ductility., The authors gratefully acknowledge the financial support from the Ministry of Economy and Competitiveness, Spain and from the Ministry of Science, Innovation and Universities of the Spanish Government, as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The reinforcement systems and construction of the specimens for the experimental programme have been funded by Kerakoll Spa through the RTD project “Seismic Strengthening of Masonry Walls” (Ref. num. A-01278). The authors wish to thank Paolo Casadei, José Luis Sanchez and José Dobón from Kerakoll Spa for their involvement and support. The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya, Spain through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Automated data analysis for static structural health monitoring of masonry heritage structures

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Alarcón Fernández, Daniel
This is the peer reviewed version of the following article: [Makoond, N, Pelà, L, Molins, C, Roca, P, Alarcón, D. Automated data analysis for static structural health monitoring of masonry heritage structures. Struct Control Health Monit. 2020; 27:e2581. https://doi.org/10.1002/stc.2581], which has been published in final form at https://onlinelibrary.wiley.com/doi/epdf/10.1002/stc.2581. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Masonry heritage structures are often affected by slow irreversible deterioration mechanisms that can jeopardise structural stability in the foreseeable future. Static structural health monitoring (SHM), aimed at the continuous measurement of key slow-varying parameters, has the potential to identify such mechanisms at a very early stage. This can greatly facilitate the implementation of adequate preventive and remedial measures, which can be critical to ensure that such structures are preserved for generations to come. However, because monitored parameters usually experience reversible seasonal variations of the same order of magnitude as changes caused by active mechanisms, identification of the latter is often a difficult task. This paper presents a fully integrated automated data analysis procedure for complete static SHM systems utilising dynamic linear regression models to filter out the effects caused by environmental variations. The method does not only produce estimated evolution rates but also classifies monitored responses in predefined evolution states. The procedure has successfully been used to identify vulnerable areas in two important medieval heritage structures in Spain, namely, the cathedral of Mallorca and the church of the monastery of Sant Cugat., Ajuntament de Sant Cugat through a project aimed at monitoring the Monastery of Sant Cugat, ref. num. C-10764. Ministry of Education, Culture and Sports of the Spanish Government through a project aimed at studying the structural condition of Mallorca Cathedral, ref. num. 2/131400106ca - 5/030300592 EF. AGAUR agency of the Generalitat de Catalunya and European Social Fund, through a predoctoral grant awarded to the corresponding author. Ministry of Science, Innovation and Universities of the Spanish Government and European Regional Development Fund through the SEVERUS project, ref. num. RTI2018-099589-B-100., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi directional pushover analysis of irregular masonry buildings without box behavior

  • Kalkbrenner, Philip
  • Pelà, Luca|||0000-0001-7760-8290
  • Sandoval Mandujano, Cristian Eliseo
This paper proposes the use of multiple nonlinear static analyses for the seismic assessment of irregular masonry buildings without box behavior. The methodology consists in executing a series of sequential pushover analyses on the spatial model of the building by rotating the horizontal loading direction from to . The so-called multi directional pushover analysis allows a more realistic evaluation of the seismic vulnerability, since it can represent a higher number of possible failure mechanisms than in the conventional pushover analysis restricted to the two “principal” directions of the structure. The application of the methodology to a highly irregular masonry building located in Chile shows that the detected failure mechanisms are in very good agreement with those derived from nonlinear dynamic analysis, as well as with the damage experienced by the structure after the earthquake of February 27, 2010 (Mw 8.8)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Influence of specimen slenderness and stacking on the experimental strength of solid fired clay bricks

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This study evaluates the effect of the specimen’s slenderness and stacking on the experimental measurement of the compressive strength of solid fired clay units. The experimental campaign has focused on two different types of solid fired clay bricks, namely mechanically extruded and handmade, with a total amount of 382 specimens tested. The research considers different standard and non-standard specimens with varying width (40, 50, 60, 70, 80, 90, and 100 mm) and height (40, 80, and 120 mm). The experimental results evidence the influence of the stacking procedure on the compressive strength, with different results depending on the manufacturing process of the unit. The influence of specimen’s slenderness on the compressive strength is more evident and regular in handmade brick specimens than in extruded ones., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical simulation of traditional timber-masonry buildings subjected to lateral loads

  • Jiménez Ramírez, María Belén
  • Pelà, Luca|||0000-0001-7760-8290
Existing heritage buildings are often composed of diverse structural typologies, representing a challenge for structural analysis. This work investigates the use of nonlinear static analysis to assess the seismic behaviour of hybrid timber-masonry buildings. The proposed methodology includes the use of Lumped Plasticity Models (LPM) and Macro-Mechanical Finite Element (FE) approaches to simulate the response of structures composed of timber frames and masonry walls. Benchmark experiments on timber and masonry specimens subjected to lateral loads are used to calibrate the constitutive laws governing the behaviour of the proposed models. The calibrated models are used to appraise the seismic response of an existing timber-masonry building located in the historical centre of Valparaíso (Chile). The results predict the nonlinear acceleration-displacement capacity of the buildings, as well as the expected damage of the structure, revealing the potential local and global failure mechanisms., This research has received the financial support from the ELARCH project (Euro-Latin America partnership in natural Risk Mitigation and protection of the Cultural Heritage), reference number 552129-EM-1-2014-1-IT- ERASMUS MUNDUS EMA21, funded with support of the European Commission. This document reflects the view of the authors, and the Commission cannot be held responsible for any use that may be made of the information contained therein. The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterizing the structural behavior of FRP profiles—FRCM hybrid superficial elements: experimental and numerical studies

  • Eskenati, Amir Reza
  • Mahboob, Amir
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Composite materials have been increasingly used to produce hybrid structures together with concrete. This system is commonly applied to bridges and roof structures. The main idea of the current research was to extend this approach by replacing the concrete with a fabric-reinforced cementitious matrix (FRCM) composite, resulting in a combination of composite materials. The main aim was to characterize the structural behavior of fiber-reinforced polymer (FRP) profiles and FRCM hybrid superficial elements. Two different prototypes of the hybrid superficial structural typology were tested to cover bidimensional and three-dimensional application cases of the proposed technology. After mortar cracking, the experimental results revealed a ductile response and a high mechanical capacity. A finite element model was implemented, calibrated, and validated by comparing numerical data with experimental results of the two prototypes. The output was a validated model that correctly captured the characteristic response of the proposed technology, which consisted of changing the structural response from a stiff plate configuration to a membrane type due to cracking of the FRCM composite part of the full solution. The suggested numerical model adequately reflected the experimental response and proved valuable for understanding and explaining the resistive processes established along this complicated FRP-FRCM hybrid structure., This research received funding from AZVI, S.A. company and from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centers, ref. num. RTI2018-099589-B-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental and numerical study of shear interface response of hybrid thin CFRP–concrete slabs

  • Mahboob, Amir
  • Gil Espert, Lluís|||0000-0002-2007-4846
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Eskenati, Amir Reza
Hybrid slabs made of carbon-fiber-reinforced polymer (CFRP) and concrete provide a solution that takes advantage of the strength properties of both materials. The performance of the system strongly depends on the CFRP–concrete interaction. This study investigates the shear behavior in the interface of the two materials. Eight full-scale experiments were carried out to characterize the interface shear response of these hybrid elements using different connection solutions. An untreated surface is compared to a surface with aggregates, with a novel system comprising a flexible, straight glass fiber mesh and an inclined glass fiber mesh. The experimental results show that the fabric connection improves the friction between materials and is responsible for the pseudo-plastic performance of the specimens. The inclined mesh produces a more uniform tightening effect compared to the straight mesh. In simulations via the finite element method, we used an adjusted frictional model to reproduce the experiments., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), and the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centers, ref. num. RTI2018-099589-B-I00). Moreover, we acknowledge partial financial support from the AZVI, S.A. company through the COMPOSITO project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental and numerical insights on the in-plane behaviour of unreinforced and TRM/SRG retrofitted brick masonry walls by diagonal compression and shear-compression testing

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
The experimental determination of the parameters that characterise the in-plane shear behaviour of masonry structures is still a challenging task. Different authors have identified the key role of tensile strength in the definition of the in-plane shear behaviour of masonry, but unfortunately its direct experimental characterisation is not always feasible, and masonry’s tensile strength needs to be obtained from complex testing methodologies. As a result, tensile strength needs to be assessed from testing setups such as diagonal compression testing and shear compression testing when the failure mode of masonry is featured by tensile diagonal cracking. However, different formulations are available in the scientific literature regarding the interpretation of the experimental results derived from such tests. This work provides new insights on the interpretation of in-plane shear experimental behaviour of double-leaf historical clay brick masonry walls with low strength mortar joints, both unreinforced and retrofitted with textile reinforced mortar and steel reinforced grout. The research evaluates results derived from both testing methodologies, and investigates the potential correlation between them to fully characterise the in-plane shear behaviour of masonry walls. Finally, a numerical model is used to simulate each testing configuration and study the stress state at the centre of the walls to determine the tensile strength and its correlation with the shear strength and the maximum load attained., The authors gratefully acknowledge the financial support from the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities of the Spanish Government, as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The reinforcement systems and construction of the specimens for the experimental programme have been funded by Kerakoll Spa through the RTD project “Seismic Strengthening of Masonry Walls” (Ref. num. A-01278). The authors wish to thank José Luis Sanchez and José Dobón from Kerakoll Spa and Paolo Casadei, for their involvement and support. The support from Agència de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analytical derivation of seismic fragility curves for historical masonry structures based on stochastic analysis of uncertain material parameters

  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Contrafatto, Francesca Romana
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Petromichelakis, Yiannis
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2019, available online at: http://www.tandfonline.com/10.1080/15583058.2019.1638992, This work presents a probabilistic method to assess the seismic vulnerability of historical masonry structures, such as churches or cathedrals, including uncertainty analysis of the material parameters. The proposed approach considers the pushover analysis using the finite element method for the structural evaluation of the seismic behaviour of masonry structures. A stochastic analysis based on Monte Carlo simulation investigates the effect of the uncertainty of the structural members’ mechanical parameters on the evaluation of the seismic fragility. The method is applied to the seismic assessment of the bay structure of Santa Maria del Mar church in Barcelona, Spain. This case study is characterised by complex geometry and material heterogeneity, and shows to be sensitive enough to the uncertainty of the material properties to experience two possible collapse mechanisms in case of an earthquake. The study presents how to derive analytical seismic fragility curves by considering the uncertainties regarding the material properties and the different types of collapse mechanism., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flexural failure of fabric reinforced cementitious mortar (FRCM) plates under punctual loads: experimental test, analytical approach and numerical simulation

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Fabric-reinforced cementitious matrix (FCRMs) are composites that produce lighter and more durable strengthening solutions. In this study, carbon and basalt fabrics were used to manufactured FRCM plate specimens. These plates were subjected to a centered punctual load with different punch diameters. Flexural failure mode was observed. Experimental tests showed that carbon and basalt fabrics improved notably the load capacity and the stiffness of mortar plates compared to unreinforced ones. Moreover, failure in the reinforced plates was progressive, preventing the sudden brittle failure of the unreinforced ones. Analytical and numerical models were adjusted and validated from experimental results, and both have proved to be effective calculation tools. What is more, numerical model allowed to determine a sliding tensile stress for the carbon fabric used in this study., Authors want to thanks the research project SEVERUS (RTI2018-099589-B-I00) of the Spanish Research Agency. Authors also want to acknowledge the support provided by Bernat Almenar Muns during experimental testing. Second author is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Accurate and locking-free analysis of beams, plates and shells using solid elements

  • Saloustros, Savvas|||0000-0002-9513-8373
  • Cervera Ruiz, Miguel|||0000-0003-3437-6703
  • Kim, Sungchul|||0000-0002-1829-6394
  • Chiumenti, Michele|||0000-0002-6286-7393
The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-020-01969-0., This paper investigates the capacity of solid finite elements with independent interpolations for displacements and strains to address shear, membrane and volumetric locking in the analysis of beam, plate and shell structures. The performance of the proposed strain/displacement formulation is compared to the standard one through a set of eleven benchmark problems. In addition to the relative performance of both finite element formulations, the paper studies the effect of discretization and material characteristics. The first refers to different solid element typologies (hexahedra, prisms) and shapes (regular, skewed, warped configurations). The second refers to isotropic, orthotropic and layered materials, and nearly incompressible states. For the analysis of nearly incompressible cases, the B-bar method is employed in both standard and strain/displacement formulations. Numerical results show the enhanced accuracy of the proposed strain/displacement formulation in predicting stresses and displacements, as well as producing locking-free discrete solutions, which converge asymptotically to the corresponding continuous problems., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) via: the ADaMANT project (Computational Framework for Additive Manufacturing of Titanium Alloy, Proyectos de I+D -Excelencia-, ref. num. DPI2017-85998-P); the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00); and the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2018-000797-S). Sungchul Kim gratefully acknowledges the support received from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) and the European Social Fund (ESF) through the predoctoral FI grants (ref. num. 2019FI_B00727)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Static structural health monitoring and automated data analysis procedures applied to the diagnosis of a complex medieval masonry monastery

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Copyright 2020 Society of Photo‑Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this publication for a fee or for commercial purposes, and modification of the contents of the publication are prohibited., Static structural health monitoring (SHM), aimed at the continuous measurement of slow-varying parameters over a long period, has been proved to be a powerful tool to support the diagnosis of masonry heritage structures. In such applications, the initial interpretation task involves the identification of evolutionary conditions from recorded data. However, this can be difficult since monitored features are influenced by environmental changes. In addition, many masonry heritage structures are characterised by a complex structural behaviour stemming from the interaction among different elements, making the task of interpreting SHM data for diagnosis very challenging. One such structure is the church of the monastery of Sant Cugat close to Barcelona, built mostly between the 12th and 15th centuries. Certain key structural parameters of the church have been monitored since 2017 with the aim of understanding the cause of visible pathologies and identifying any active deterioration mechanisms that could pose a threat to the structural integrity of the church in the future. This paper presents the application of an automated data analysis methodology to this problem. The method uses dynamic regression models to filter out components related to reversible seasonal fluctuations from measurements and automatically classifies monitored parameters into evolutionary states based on predicted evolution rates and dispersion metrics from the filtering procedure. A tool is presented which allows analysis results to be updated as new data is received. Finally, results from the proposed methodology are used for the diagnosis of the structure and their usefulness in a broader decision-making framework is discussed., This research has received _nancial support from the City Council of Sant Cugat (Ajuntament de Sant Cugat) through a project aimed at monitoring the structure of the church of the monastery of Sant Cugat (ref. num. C-10764). The authors also gratefully acknowledge the _nancial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018- 099589-B-I00). Support from the AGAUR agency of the Generalitat de Catalunya and the European Social Fund, in the form of a pre-doctoral grant awarded to the corresponding author is also gratefully acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bending and compression performance of full-scale sandwich panels of hemp fabric reinforced cementitious matrix

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Sandwich panels composed of fabric-reinforced cementitious matrix (FRCM) and extruded polystyrene foam (EPS) represent a light and insulating solution compared with other types of enclosure walls, such as steel-reinforced concrete (RC) panels. To improve the sustainability and lightness of FRCM sandwich panels used for building enclosures, this study proposes the use of hemp fabrics in contrast to glass fabrics. Modal analysis and bending and compression tests were conducted on full-scale panels with hemp- and glass-FRCMs. The results obtained from these tests indicate that the use of hemp fabrics with greater equivalent thickness and deformation capacity than glass fabrics make the production of ductile and strength (35 % more than glass-FRCM) sandwich panels possible. Nevertheless, glass-FRCMs allow the production of more stiffened panels. In addition, this study presents a simplified analytical model of sandwich FRCM panels based on the definition of cracked section strength, which is useful in the case of full composite action in the sandwich solution., This study has been partially carried out within the project ‘‘Desarrollo de paneles industriales prefabricados tipo sándwich con materiales compuestos de matriz cementicia (FRCM) y con digitalizacion ´ BIM incorporada. PANELPLUS’’, funded by the Spanish Ministry of Science, Innovation and University through the Torres Quevedo program. The materials support of Sika AG and Mapei Spain S.A. is acknowledged. Authors want to thanks the research project SEVERUS (RTI2018- 099589-B-I00) of the Spanish Research Agency. Second author is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A machine learning based material homogenization technique for in-plane loaded masonry walls

  • Cornejo Velázquez, Alejandro|||0000-0002-5157-742X
  • Kalkbrenner, Philip
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Pelà, Luca|||0000-0001-7760-8290
In recent years, significant advancements have been made in computational methods for analyzing masonry structures. Within the Finite Element Method, two primary approaches have gained traction: Micro and Macro Scale modeling, and their subsequent integration via Multi-scale methods based on homogenization theory and the representative volume element concept. While Micro and Multi-scale approaches offer high fidelity, they often come with a substantial computational burden. On the other hand, calibrating homogenized material parameters in Macro-scale approaches presents challenges for practical engineering problems. Machine learning techniques have emerged as powerful tools for training models using vast datasets from various domains. In this context, we propose leveraging Machine Learning methods to develop a novel homogenization strategy for the in-plane analysis of masonry structures. This strategy involves automatically calibrating a continuum nonlinear damage constitutive law and an appropriate yield criteria using relevant data derived from Micro-scale analysis. The optimization process not only enhances material parameters but also refines yield criteria and damage evolution laws to better align with existing data. To achieve this, a virtual laboratory is created to conduct micro-model simulations that account for the individual behaviors of constituent materials. Subsequently, a data isotropization process is employed to reconcile the results with typical isotropic constitutive models. Next, an optimization algorithm that minimizes the difference of internal dissipated work between the micro and macro scales is executed. We apply this technique to the in-plane homogenization of a Flemish bond masonry wall. Evaluation examples, including simulations of shear and compression tests, demonstrate the method’s accuracy compared to micro modeling of the entire structure., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Challenges posed by computational modelling and nonlinear analysis of complex historical masonry structures

  • Pelà, Luca|||0000-0001-7760-8290
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This study analyses some of the most common challenges encountered in numerical modelling and nonlinear analysis of complex historical masonry structures of the built cultural heritage. The research highlights the need for preliminary activities, including historical investigation, inspection, and structural health monitoring, to support the advanced computations by means of essential empirical data for model calibration and validation. This multidisciplinary scientific approach allows drawing optimum conclusions from the structural analysis, in order to plan future studies or interventions respectful of the heritage value of the historical building. The study presents a numerical model, specifically developed for complex historical masonry constructions, able to describe the time-dependent strain accumulation in the material due to long-term exposure to constant stress, as well as the damaging behaviour under different stress states. The resulting coupled viscoelasticity and tension-compression continuum damage model is characterised by several advantages, especially in terms of simplicity and computational efficiency. The strain driven format, the reduced number of internal variables and input parameters make the model suitable for the numerical analysis of large historical structures, such as churches or cathedrals. The proposed constitutive model is combined with a crack-tracking technique to represent tensile crack localization, allowing a more realistic description of damage phenomena and mesh-objective results. In this work, the numerical model is applied to the study of two important monuments in Spain, i.e. Mallorca Cathedral and the church of the Poblet Monastery (UNESCO World Heritage Site). The structural analysis of the first case study allows understanding the reasons of its current deformed condition, i.e. critical construction process, strain accumulation given by long-term creep phenomena, and nonlinear geometric effects. The structural analysis of the second case study allows the structural diagnosis of the existing deformation and cracking patterns, given by architectural alterations experienced by the monument in the past, insufficient buttressing of the naves, and effects of past earthquakes. In both studies, the results of the advanced numerical results, fully supported and validated by the empirical evidence from experimental activities, motivate the development of future studies based on continuous structural health monitoring, now under consideration.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental and numerical study of adhesively and bolted connections of pultruded GFRP I-shape profiles

  • Eskenati, Amir Reza
  • Mahboob, Amir
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Recent developments indicate that the application of pultruded FRP profiles has been continuously growing in the construction industry. Generating more complex structures composed of pultruded FRP profiles requires joining them. In particular, I-shape glass fiber pultruded profiles are commonly used and the possible joints to connect them should be specifically studied. The mechanical behavior of adhesively and bolted joints for pultruded Glass FRP (GFRP) profiles has been experimentally addressed and numerically modeled. A total of nine specimens with different configurations (bolted joints, adhesive joints, web joints, web and flange joints, and two different angles between profiles) were fabricated and tested, extending the available published information. The novelty of the research is in the direct comparison of joint technologies (bolted vs. adhesive), joint configuration (web vs. flange + web) and angles between profiles in a comprehensive way. Plates for flange joints were fabricated with carbon fiber FRP. Experimental results indicate that adding the bolted flange connection allowed for a slight increase of the load bearing capacity (up to 15%) but a significant increase in the stiffness (between 2 and 7 times). Hence, it is concluded that using carbon FRP bolted flange connection should be considered when increasing the joint stiffness is sought. Adhesively connections only reached 25% of the expected shear strength according to the adhesive producer if comparing the numerically calculated shear strength at the failure time with the shear strength capacity of the adhesive. Apart from assessing adhesive connections, the implemented 3D numerical model was aimed at providing a simplified effective tool to effectively design bolted joints. Although the accurate fitting between experimental and numerical results of the mechanical response, especially the stiffness of the joint, the local failure experimentally observed was not automatically represented by the model, because of the simplified definition of the materials oriented to make the model available for a wide range of practitioners., This research received funding from AZVI, S.A. company and from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centers, ref. num. RTI2018-099589-B-I00)., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of in-plane shear behaviour of brick masonry retrofitted with basalt and steel reinforced mortars

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
This paper focuses on the application of composite materials to improve the in-plane shear strength of existing brick masonry walls. The experimental program involved the construction of walls composed of handmade solid clay brick and hydraulic lime mortar joints, a recurrent typology for historical buildings in the Mediterranean countries. The walls were tested under both unreinforced and reinforced configurations, being the latter obtained by either externally bonded textile reinforced mortar (TRM) or structural repointing with near surface mounted (NSM) rebars into the bed joints. Both TRM and NSM compounds were embedded in hydraulic lime mortar. The diagonal compression tests on retrofitted specimens considered different double-sided TRM configurations. One of them consisted in a novel asymmetric layout based on basalt TRM on one face, and NSM steel reinforcing bars on the other face. The experimental results illustrate the suitability of the proposed TRM and NSM solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research outcomes highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Investigation on experimental techniques for the mechanical characterization of brick masonry

  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
One of the main difficulties found in the assessment and verification of masonry historical structures lays in the characterization of the main mechanical properties of the material components (units and mortar) and masonry as composite material. In an attempt to provide possible approaches for mechanical characterization, the paper presents and discusses different Minor Destructive Tests (MDTs) oriented to the measurement of the compressive strength of mortar bed joints and masonry composite samples extracted from existing brick masonries. The MDTs discussed for mortar characterization are the Double Punch Test (DPT), the Windsor Pin Penetration Test (PPT) and the Helix Screw Pull-Out Test (HPT). The method presented for the characterization of masonry as composite encompasses laboratory tests on cylindrical core samples. Different types of cylindrical samples, corresponding to alternative sizes and geometrical joint configurations, are investigated based on-purpose built laboratory walls and from a set of real case studies. The proposed MDTs are appraised with regard to their reliability and real applicability., The authors gratefully acknowledge the financial support provided by the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government and the State Agency of Research (AEI), as well as that of the European Regional Development Fund (FEDER) through projects MULTIMAS (BIA2015-63882-P) and SEVERUS (RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Historical development and seismic performance of unreinforced masonry buildings with vertical extensions in the city centre of Barcelona

  • Marafini, Francesca
  • Dimovska, Sara|||0000-0003-4882-7608
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Cornadó Bardón, Còssima|||0000-0003-0553-7176
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2022, available online at: http://www.tandfonline.com/10.1080/15583058.2022.2096513, This paper presents the historical development of the vertical extensions of unreinforced masonry buildings in the Eixample district of Barcelona and their impact on the seismic behaviour. Existing masonry buildings of Eixample present significant seismic risk because, despite the low to moderate seismic hazard of Barcelona, they show a marked vulnerability given their average height of six storeys and the substantial slenderness of the walls. Between the end of the 19th century and the beginning of the 20th century, the vertical extensions, known as remuntes in Catalan, were a common solution to the increasing demographic demand of the city. In their majority, these vertical extensions add a structural irregularity that represents a potential vulnerability factor not yet investigated. The present study focuses on Eixample’s remuntes, including their historical development, the description of their structural features, and the identification of their most representative configurations in the existing building stock. A seismic analysis based on the Finite Element Method is presented on a reference model without extensions and three others with the most recurrent configurations of remuntes. The seismic response is investigated through pushover analysis. The results provide a better understanding of the negative impact of the vertical extensions on the seismic performance., This work was supported by the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU) [RTI2018-099589-B-I00], the State Agency of Research (AEI) [RTI2018-099589-B-I00] and the European Regional Development Fund [RTI2018-099589-B-I00]; through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres [RTI2018-099589-B-I00]; Agència de Gestió d'Ajuts Universitaris i de Recerca; MSc SAHC Consortium scholarship; Sapienza University of Rome., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear numerical modelling of complex masonry heritage structures considering history-related phenomena in staged construction analysis and material uncertainty in seismic assessment

  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29CF.1943-5509.0001494., This paper presents the systematic use of numerical analysis as a tool for addressing some of the most common challenges encountered in the structural analysis of complex historical masonry structures, i.e. the description of the effects of history-related phenomena and the un-certainty of material properties. The numerical strategy is based on the use of a constitutive model able to describe time-dependent strain accumulation, as well as damaging behaviour un-der different stress states. This constitutive model is combined with a crack-tracking technique to represent tensile crack localization. The numerical model is applied to the study of two im-portant monuments in Spain, i.e. the Mallorca Cathedral and the church of the Poblet Monas-tery. The staged construction analysis of the first case study allows understanding the reasons of its current deformed condition, i.e. critical construction process, strain accumulation given by long-term creep phenomena, and nonlinear geometric effects. The structural analysis of the second case study allows the structural diagnosis of the existing deformation and cracking pat-terns given by architectural alterations, insufficient buttressing of the naves, and past earth-quakes. The application of a probabilistic analysis to the church of the Poblet monastery allows considering the effects of the uncertainties of material properties and numerical parameters in the seismic vulnerability assessment., The authors would like to thank the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban cen-tres ref. num. RTI2018-099589-BI00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance of hemp-FRCM-strengthened beam subjected to cyclic loads, Comportamiento de vigas reforzadas con cáñamo FRCM bajo cargas cíclicas

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Mendizábal Dinucci, Virginia Dolores|||0000-0003-0919-801X
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
Fabric-reinforced cementitious matrix (FRCM) composites are materials that are usually applied to strengthen existing structures. In this study, a hemp mesh coated with epoxy was manufactured and combined with a cementitious matrix to strengthen a concrete beam. This beam was subjected to bending cyclic loading tests and a nondestructive modal analysis test. The modal analysis was performed to determine the dynamic elastic properties of the beam under pre-cracking, post-cracking, and strengthened conditions. The beam stiffness increased following strengthening with hemp-FRCM. The results of the experimental cyclic loading test showed that the hemp-FRCM system improved the load-bearing capacity of the beam at the service limit state by 42%. Analytical and numerical models were adjusted and validated using the experimental results, and both proved to be effective calculation tools. The models accurately reproduced the behaviour of the FRCM-strengthened concrete beam if the strengthening connection could prevent sliding and mortar debonding failures., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Laboratory and in-situ characterisation of masonry materials in a large historical industrial building in Barcelona

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This paper presents an experimental campaign carried out in an historical industrial building of Barcelona from the 19th century, considering in-situ and laboratory minor destructive testing (MDT) techniques. The results obtained showed a good relationship between the in-situ MDT techniques and the tests carried out in the laboratory. The experimental results from different portions of the large-scale building allowed the discovery of different material typologies deriving from different construction phases., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental setup and numerical evaluation of the compression test on thin tiles for masonry timbrel vaults

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Compressive tests on clay tiles used in historical masonry timbrel vaults are hindered by the relatively small thickness of the specimens, resulting in buckling or confinement problems depending on the loading direction. This paper presents an experimental campaign and a numerical validation of a novel testing setup for estimating the compressive strength of thin clay tiles used in timbrel vaults. The experimental campaign focuses on two different types corresponding to historical and modern handmade tiles. Experimental and numerical results show that the proposed test setup can be used for the estimation of the compressive strength of thin clay tiles., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Seismic performance of typical hybrid buildings in the urban centre of Barcelona

  • Dimovska, Sara|||0000-0003-4882-7608
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Unreinforced existing masonry buildings, located in many historical urban centres, present specific construction characteristics that can have a significant impact on their seismic performance. As these structures are often designed considering only gravity loads before the introduction of seismic codes, they are commonly found to be particularly vulnerable to seismic actions. This work investigates the seismic performance of representative existing masonry buildings located in the Eixample district of Barcelona, Spain. These buildings are characterised by several common structural features, allowing grouping them into building typologies characterised by a similar structural response. The results of a building taxonomy of the specific district manifest the existence of two structural typologies related with the load-bearing system: one with load-bearing slender masonry walls throughout the whole height and a second hybrid one with steel beams and cast-iron columns on the ground floor and unreinforced masonry walls in the upper ones. The second typology is very common because it allows for large open space at the ground floor level, commonly used for commercial or administrative facilities. The drawback of this hybrid structural system is its reduced seismic performance, as the slender piers at the ground floor facilitate the development of a soft-storey mechanism. The main objective of this paper is to evaluate the seismic vulnerability of a typical hybrid building system composed by steel frames on the ground floor and unreinforced masonry at the upper floors. The seismic assessment and the identification of the collapse mechanism of this building typology have been carried out using the Finite Element Method. Seismic loading has been simulated through non-linear static (pushover) analyses in two main directions (parallel and perpendicular to the façades). The results of the numerical analysis allow a better understanding of the seismic performance of hybrid steel-masonry building typologies. This work is part of an ongoing research devoted to a large-scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical simulation of masonry walls strengthened with vegetal fabric reinforced cementitious matrix (FRCM) composites and subjected to cyclic loads

  • Mercedes Cedeño, Luis Enrique|||0000-0003-2520-8599
  • Bernat Masó, Ernest|||0000-0002-7080-0957
  • Gil Espert, Lluís|||0000-0002-2007-4846
The growing concern for the preservation of old buildings and the wide use of masonry in the construction of civil works has led to a great development of specific techniques to strengthen masonry structures. FRCM (fabric reinforced cementitious matrix) of vegetal fibres arises as a strengthening option to be considered because low cost, low density, recyclability and biodegradability brought by vegetal fibres. In this study, numerical models were used to represent masonry walls unreinforced and strengthened with FRCM (hemp, cotton and glass). The numerical model presents a new way of simulation of FRCM systems and their failure pattern. This was validated by comparison to previous experimental and analytical results. Results showed that proposed model is an effective calculation tools to reproduce the maximum shear of masonry walls strengthened with FRCM and subjected to cyclic loads, with variations between 7 and 15% with respect to the experimental and analytical. The numerical model was also useful to reproduce the walls hysteresis behavior, although showed some inability to reproduce the reversible crack opening-closing that was observed in the experimental tests., Authors want to thanks the research project SEVERUS (RTI2018-099589-B-I00) of the Spanish Research Agency. Authors also want to acknowledge the support provided by Bernat Almenar Muns during experimental testing. Second author is a Serra Húnter Fellow., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Measurement of solid brick compressive strength and anisotropy on non-standard small cubic specimens

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The final authenticated version is available online at https://doi.org/10.1007/978-3-031-39603-8_48, An experimental research has been carried out on the possibility of measuring the compressive strength of ceramic solid bricks by testing in laboratory non-standardized cubic samples measuring 40 × 40 × 40 mm3. The viability of such approach has been confirmed through a systematic comparison, for a variety of brick types, with compression strength values obtained for the standard prismatic 100 × 100 × 40 mm3 specimen. The comparison has allowed the derivation of a reliable correlation to estimate an equivalent compressive strength based on the 40 × 40 × 40 mm3 spec-imen. The proposed cubic specimen is largely advantageous in the characterization of the compressive strength of exist-ing masonries built with moderately thin bricks (with thickness in the order or 4 or 5 cm). It can be also used to accurately characterize the anisotropy that the manufacturing process can induce in the bricks and its influence on the strength. Taking advantage of this possibility, the paper also presents a detailed investigation on the anisotropy of different brick types., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Assessing the impact of seismic risk mitigation at the urban scale on community resilience and housing recovery

  • Basaglia, Alberto
  • Aprile, Alessandra
  • Spacone, Enrico
  • Pelà, Luca|||0000-0001-7760-8290
European historical city centers are particularly prone to natural disasters. This is due to the fragility of structures that often times do not comply with seismic codes; the high constructions’ density that causes induced damage; and the historical relevance of buildings that makes difficult the enacting of mitigation strategies. In Italy, major earthquake caused extensive damages over the last century. Seismic events have a huge impact on the Nation’s economy growth due to direct and indirect impacts, such as for example the high reconstruction costs or the business interruption spread out over a long period, respectively. In addition, the duration of recovery can affect the population wellbeing and cause permanent displacement. For this reason, the preventive planning of disaster management strategies are crucial to mitigate the damage and enhance resilience. Proposed strategies have to be effective and economically sustainable. In this paper, two towns affected by the 2012 Northern Italy Earthquake are chosen to analyze the reconstruction process. Using information published on the town journal, relevant aspects of the community resilience are highlighted. In particular, the housing recovery, i.e. the return of displaced people to a permanent housing solution is investigated. Then, a suite of seismic mitigation strategies is proposed for both cities, taking into account the peculiarity of the built environment and the damage distribution available thanks to the post-event buildings’ inspection. The effectiveness of the proposed strategies is assessed through a cost-benefit analysis, highlighting optimal solutions to reduce the economic and social losses., This work was supported by the FAR funding of the University of Ferrara, 2015, “Historical Centers Livable and Sustainable” (HC-LIVE)” and by the scholarship of the University “G. D’Annunzio” Chieti-Pescara, 2019, “Risk Assessment of the Built Heritage at the Urban Scale” (Ref. Num. 0002299). The fourth Author would like to acknowledge the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI), and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. Num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Seismic vulnerability assessment of representative building typologies from Barcelona's Eixample district

  • Dimovska, Sara|||0000-0003-4882-7608
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Unreinforced masonry buildings prevail in many old historical centres and urban areas worldwide. These structures may present inadequate seismic performance because they were often designed without considering any seismic resistance requirements. Therefore, they may be highly vulnerable and susceptible to damage caused by earthquakes, even of low intensity. This work investigates the seismic vulnerability of typical unreinforced masonry buildings situated in the Eixample district of Barcelona, Spain. Most of the buildings of the district were designed only for vertical static loads with slender load-bearing masonry walls and flexible diaphragms. A typical characteristic is the presence of openings with considerable size on the facades. The identification of the main parameters affecting the structural behaviour under lateral loading is necessary to evaluate the seismic vulnerability. As a first step, a building taxonomy for the Eixample district has been prepared in order to classify the different building typologies by taking into account the influence of the structural features in the overall response. This typology classification serves two aims. The first aim is to empirically evaluate the vulnerability of each category. The second one is to provide the basis for creating a numerical model of a representative building and analyse its seismic performance. The main objective of this paper is to assess the seismic behaviour of a typical unreinforced masonry structure by means of nonlinear static analysis. For this purpose, a three-dimensional Finite Element model of a representative building has been prepared. Pushover analyses have been performed in two directions (parallel and perpendicular to the façades) aiming to identify the typical failure mechanisms and the seismic capacity. The performance of the representative building typology, with its typical heterogeneities and irregularities, is compared with that of a reference regular unreinforced masonry structure. Additionally, a parametric analysis is carried out to evaluate the different seismic response by adding more storeys in height. This work is the basis for future analyses devoted to large scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The inspection by minor destructive testing in projects of adaptive reuse of historical masonry buildings and design of green rooftops in Barcelona

  • Pelà, Luca|||0000-0001-7760-8290
  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Cuadros Rojas, Emerson Julio|||0000-0003-4148-848X
  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The mechanical characterisation of existing masonry in historical structures encounters several technical dif-ficulties due to the complexity and heterogeneity of this traditional material, as well as to the need for respectful inspec-tion activities able to preserve the cultural heritage value of the building. This paper presents and discusses different Minor Destructive Testing (MDT) techniques oriented at estimating, either in-situ or in the laboratory, the mechanical properties of masonry at the level of components, such as units, tiles, and mortar joints, and at the level of the composite material. The research addresses different issues related to the execution of laboratory tests on sampled historical mate-rials, such as selection of the size and shape of specimens, different types of treatments for the sample, testing protocols, and experimental setup. The complementary use of Finite Element Method (FEM) models represents a valuable activity to provide a good understanding of the experimental behaviour exhibited by the specimens, and especially concerning the execution of non-standard laboratory tests. The possibility of in-situ MDT is explored considering techniques based on different portable instruments, previously calibrated through ad-hoc experimental programs under controlled labora-tory conditions. The research is based on a high number of tests executed at the UPC within the context of several experimental programs linked to projects of adaptive reuse of existing masonry buildings and design of green rooftops in Barcelona., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional De-velopment Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). The first author gratefully acknowledges the owners of the historical buildings investigated, as well as people from the institutions and companies involved in the studies and projects mentioned in this work and in particular Sergio Carratalá from MataAlta. The second and third authors gratefully acknowledge the Spanish Ministry of Science, Innovation and Universities, and the AGAUR agency of the Generalitat de Catalunya, for the financial support of their predoctoral grants., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.2 - Incorporar mesures relatives al canvi climàtic en les polítiques, les estratègies i els plans nacionals, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A risk index for the structural diagnosis of masonry heritage (RISDiMaH)

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
Experts responsible for the safety evaluation of unique masonry heritage structures usually need to weigh information from various diagnosis activities before deciding the best course of action for preservation. Typical sources of valuable information are historical and in-situ surveys and inspections, minor and non-destructive testing, structural health monitoring, and structural analysis, among others. Due to the complexity of the problem and singular aspects of monuments, these decisions are challenging and often made solely on the basis of expert judgement. A systematic risk assessment procedure is proposed involving the computation of two indices to facilitate the decision-making process: an index related to the estimated risk of damage, and another to the uncertainty behind this estimation. Results from applying the procedure to several case studies are provided to demonstrate its usefulness., This research has received the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The corresponding author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the nancial support of his predoctoral grant. The authors would like to thank Professor Pere Roca for providing diagnostic reports of several masonry heritage structures for this research. Besides, the authors are also grateful to Irene Josa for coming up with the acronym RISDiMaH., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Efficient constitutive model for continuous micro-modeling of masonry structures

  • Petracca, Massimo
  • Camata, Guido
  • Spacone, Enrico
  • Pelà, Luca|||0000-0001-7760-8290
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2023, available online at: http://www.tandfonline.com/10.1080/15583058.2022.2124133., Masonry is a composite material often modeled as an equivalent homogenous material. However, the complexity of its micro-structure leads to complex mechanical responses, which are almost impossible to capture accurately with homogenous constitutive models. Micro-modeling can be used in these scenarios, allowing for the explicit modeling of microstructural components, leading to an accurate capturing of their interaction. Its main drawback is the computational cost, which often makes this approach suitable only for the simulation of small specimens. This is especially true due to strain-softening leading to severe instabilities and non-convergence of the solution. The objective of this work is to propose a simple yet effective constitutive plastic-damage model for the microstructural components of masonry. It is based on a damage model previously developed by the authors. For a better representation of the cyclic response of masonry, plasticity is added using a simplified implementation that does not strictly follow the rules of standard elastoplasticity, allowing an explicit computation of the stress tensor from the strain tensor without the need for an iterative loop at the material level. To reduce the numerical issues related to strain-softening and thus improve the stability of the solution, an IM-PLEX integration algorithm is adopted., The last author gratefully acknowledges the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust estimation of axial loads sustained by tie-rods in historical structures using Artificial Neural Networks

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
Widely used simplified analytical methods for estimating the tensile force in tie-rods are clearly not applicable when they contain significant discontinuities or irregularities. A common example for which this fact becomes relevant in practice is the use of connectors to unify historical ties consisting of several segments. To address this challenge, a robust hybrid methodology is proposed which can be applied to any historical tie by employing a data-driven approach to a dataset generated using the finite element method. The methodology is applied to a real case study involving two historical ties., The authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Servei del Patrimoni Arquitect`onic of the Generalitat de Catalunya through a project (managed by the City Council of Sant Cugat) aimed at monitoring the church of the Monastery of Sant Cugat [grant number C-10764]; the Ministry of Science, Innovation and Universities of the Spanish Government and the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres) [grant number RTI2018-099589-B-I00]; and the AGAUR agency of the Generalitat de Catalunya in the form of the predoctoral grant of the first author., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling of in-plane seismic behaviour of one-way steel or timber jack arch floors in existing buildings: application to the Eixample district of Barcelona

  • Dimovska, Sara|||0000-0003-4882-7608
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The type of floor system has a decisive role in the seismic performance of unreinforced masonry buildings. The in-plane stiffness of the floors has to be adequately represented in the numerical modelling of existing buildings, as it can influence their seismic capacity. This paper investigates the seismic behaviour of one-way arch floor systems composed of steel or timber beams, and ceramic tile vaults. The main objective of the research is to provide a numerical procedure for the simplified modelling of jack arch floor systems in the seismic assessment of unreinforced masonry buildings. The presented approach aims to provide values for the orthotropic properties of simplified floor models composed of elastic 2D shell elements. The orthotropic elastic properties are computed and calibrated by means of comparisons with detailed 3D nonlinear models of the floors. The case study is a multi-storey existing masonry building of the historical “Eixample” district in Barcelona, which includes one-way arch floor systems. The Finite Element Method has been used for the numerical simulation of the seismic performance through nonlinear static (pushover) analyses. The results of the study contribute to a better understanding of the effect of the behaviour of one-way floors with steel or timber beams and tile vaults on the seismic response of masonry buildings. This work provides indicative values for the proper modelling of these particular floor slabs. The proposed methodology is also applicable to the numerical simulation of any other one-way floor system., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The first author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the financial support of her predoctoral grant., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Photogrammetry-aided numerical seismic assessment of historical structures composed of adobe, stone and brick masonry: application to the San Juan Bautista Church built on the Inca temple of Huaytará, Peru

  • Cuadros Rojas, Emerson Julio|||0000-0003-4148-848X
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Tarque Ruiz, Sabino Nicola
  • Pelà, Luca|||0000-0001-7760-8290
This research presents a cost-effective surveying methodology to assist the seismic assessment of complex heritage buildings, based on terrestrial structure-from-motion (SfM) photogrammetry. The method was applied to the study of the seismic performance of the church of San Juan Bautista – Inca temple of Huaytará, Peru, an emblematic case study due to its complex architecture and coexistence of different construction materials. The geometrical model for the seismic assessment was developed with an error of less than 2¿% using SfM photogrammetry. Non-linear static pushover analyses were performed on 3D FEM models of the nave and the towers to evaluate their individual response under seismic loading. Mechanical properties of different structural materials of the church were evaluated based on laboratory experimental tests on mortar and adobe, contemporary and ancient fired brick, Inca stone, colonial stone and rubble stone units. Non-linear pushover analyses were conducted in four directions perpendicular to the perimeter walls, and the response of the structure was compared with the seismic demand specified in Peruvian Standards. The simulations show that damage-prone areas are the western and eastern facades, with cracking at the connections between orthogonal walls, as well as at the interface of adobe masonry with Inca stone masonry. The towers exhibit similar seismic response, with lower strength capacities compared to the main nave. In this case, flexural overturning mechanisms and cracking at the interface between stone and adobe masonry were observed. The displacement-based seismic assessment using the N2 method shows that a peak ground acceleration of 0.21¿g could lead to the collapse of the north and south facades of the main nave. The towers showed a much smaller capacity with PGA leading to collapse of approximately 0.09¿g. Overall, this study contributes to the understanding of the seismic performance of the Huaytará-Huancavelica church, highlighting vulnerabilities and providing valuable information for its preservation and future interventions. Future investigations should focus on on-site tests that will allow the estimation of the effect of existing damage on the structural response and their incorporation in the numerical model., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The first author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the financial support of his predoctoral grant, the PRONABEC program by the Peruvian Government for the financial support of his master studies and the in-situ activities of the research, and Oliver Cuadros for his support in the photogrammetric modelling., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Relationship between the static and dynamic elastic modulus of brick masonry constituents

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
Different brick masonry typologies have been and are still widely used in construction worldwide. Despite being a fundamental deformation property, experimentally determining the static elastic modulus in compression for brick masonry constituents remains a challenging task. Static modulus estimates usually show much larger dispersion than those involved in determining the dynamic elastic modulus. Although the static property is preferred for common structural verifications, the relationship between the two is yet to be well understood. In light of the above, this paper provides an empirical expression to estimate the static elastic modulus of brick masonry constituents from its dynamic counterpart., This research has received the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The corresponding author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya, and the second author gratefully acknowledges the AEI and the European Social Found (ESF), for the financial support of their predoctoral grants., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of cross section aspect ratio and bearing surfaces treatment on the compressive strength of solid fired clay brick specimens

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This study addresses the evaluation of the confinement effect in the experimental determination of compressive strength in solid fired clay units. The experimental campaign has focused on two different types of solid fired clay bricks, namely mechanically extruded and handmade, with a total amount of 458 specimens. The research considers different standard specimens, such as whole or half brick, and 100 × 100 × 40 mm3 specimen, and nonstandard 40 × 40 × 40 mm3 specimen, subjected to different standard bearing surface treatments, i.e. grinding, capping with cement mortar or gypsum plaster, placing with birch plywood or fibreboard. Additionally, two novel bearing surface treatments are proposed, i.e. covering with gypsum powder, and placing two oiled PTFE leaves. The experimental campaign has focused on four main aspects. First, the evaluation of the compressive strength value in specimens with hardening response. Second, the influence of the cross section’s aspect ratio, defined as the ratio between the specimen’s length and width. Third, the influence of the bearing surface treatment on the determination of the compressive strength. Fourth, the evaluation of the standard compressive strength through the comparison amongst reference standards. The results highlight and quantify the different factors that influence the confinement, while detecting differences depending on the manufacturing process of the unit. In addition, the results reveal the use of oiled PTFE leaves as a promising and fast possibility of low boundary friction to obtain the strength regardless of the specimen shape., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing community resilience, housing recovery and impact of mitigation strategies at the urban scale: a case study after the 2012 Northern Italy Earthquake

  • Basaglia, Alberto
  • Aprile, Alessandra
  • Spacone, Enrico
  • Pelà, Luca|||0000-0001-7760-8290
In this paper, the reconstruction process of a town afected by the 2012 Northern Italy Earthquake is analysed using information published on the town journal. Relevant aspects are highlighted, and the housing recovery is compared with that of a nearby city. Then, a what-if scenario is considered, by proposing a set of seismic mitigation strategies. These strategies are applied to a small sub-system of the city and the variation of the buildings’ vulnerability and expected damage is evaluated using a recently introduced methodology for risk assessments at the urban scale. Finally, a cost–beneft analysis is performed to assess the efectiveness of the proposed strategies. The analysis highlights a significant reduction in the expected damage and socioeconomic impact, as well as an increase in the overall performance of the urban system., Open access funding provided by Universitegli Studi G. D’Annunzio Chieti Pescara within the CRUI-CARE Agreement. This work was supported by the FAR funding of the University of Ferrara, 2015, “Historical Centers Livable and Sustainable” (HC-LIVE)” and by the scholarship of the University “G. D’Annunzio” Chieti-Pescara, 2019, “Risk Assessment of the Built Heritage at the Urban Scale” (Ref. Num. 0002299). The fourth Author would like to acknowledge the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI), and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. Num. RTI2018-099589-B-I00)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cyclic shear-compression testing of brick masonry walls repaired and retrofitted with basalt textile reinforced mortar

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
This paper reports an experimental programme on masonry walls composed of handmade solid clay brick and hydraulic lime mortar. Reversed cyclic shear compression tests were carried out on the walls in three different configurations: unreinforced, repaired and retrofitted, and just retrofitted. Damaged walls were repaired and retrofitted with Basalt Textile Reinforced Mortar (B TRM) and tested again to investigate the recovery of strength, stiffness and the improvement in drift capacity. The repair consisted in filling the open cracks and replacing the damaged bricks by following the so-called ‘‘scuci-cuci’’ technique. The just retrofitted configuration consisted of externally bonded B-TRM on undamaged walls. The B-TRM system comprised continuous bidirectional grids of basalt fibre embedded in hydraulic lime mortar on both surfaces of the walls. The experimental results showed the suitability of the proposed solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research results highlighted the capacity of the proposed repair technique to reinforce damaged walls and the effectiveness of the investigated B-TRM system in increasing the resistance, the ductility, and the energy dissipation of unreinforced clay brick masonry. In addition, the results allowed a better understanding of the behaviour of masonry walls subjected to cyclic horizontal displacement in terms of failure mechanism and displacement capacities., The authors gratefully acknowledge the financial support from the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities of the Spanish Government, as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The reinforcement systems and construction of the specimens for the experimental programme have been funded by Kerakoll Spa through the RTD project “Seismic Strengthening of Masonry Walls” (Ref. num. A-01278). The authors wish to thank Paolo Casadei, José Luis Sanchez and José Dobón from Kerakoll Spa for their involvement and support. The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental assessment of shear response of brick masonry retrofitted with TRM

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
As one of the main historical construction materials, masonry is abundant among the architectural heritage of earthquake-prone areas of the Mediterranean countries. Earthquake mitigation approaches are now focusing on strengthening solutions based on compatible and environmentally friendly repair materials. These solutions should efficiently improve the in-plane lateral strength and displacement capacity, which are the two most significant parameters considered in the seismic assessment of masonry buildings. This paper reports an experimental programme on masonry walls composed of handmade solid clay brick and hydraulic lime mortar, a recurrent typology for historical buildings. Tests under cyclic in-plane forces were carried out on unreinforced and retrofitted walls. The unreinforced walls were repaired and retrofitted after being damaged in the first test and were then tested again to investigate the recovery of strength. The repair consisted in filling the open cracks and replacing the damaged bricks by following the so-called “scuci-cuci” technique. The retrofitting consisted of externally bonded textile reinforced mortar (TRM). The investigated TRM system was a continuous bidirectional grid of basalt embedded in hydraulic lime mortar. The experimental results show the suitability of the proposed solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research results highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry. In addition, the results allow a better understanding of the behaviour of masonry walls subjected to cyclic horizontal displacement., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seismic vulnerability assessment of representative building typologies from Barcelona's Eixample district

  • Dimovska, Sara
  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
Unreinforced masonry buildings prevail in many old historical centres and urban areas worldwide. These structures may present inadequate seismic performance because they were often designed without considering any seismic resistance requirements. Therefore, they may be highly vulnerable and susceptible to damage caused by earthquakes, even of low intensity. This work investigates the seismic vulnerability of typical unreinforced masonry buildings situated in the Eixample district of Barcelona, Spain. Most of the buildings of the district were designed only for vertical static loads with slender load-bearing masonry walls and flexible diaphragms. A typical characteristic is the presence of openings with considerable size on the facades. The identification of the main parameters affecting the structural behaviour under lateral loading is necessary to evaluate the seismic vulnerability. As a first step, a building taxonomy for the Eixample district has been prepared in order to classify the different building typologies by taking into account the influence of the structural features in the overall response. This typology classification serves two aims. The first aim is to empirically evaluate the vulnerability of each category. The second one is to provide the basis for creating a numerical model of a representative building and analyse its seismic performance. The main objective of this paper is to assess the seismic behaviour of a typical unreinforced masonry structure by means of nonlinear static analysis. For this purpose, a three-dimensional Finite Element model of a representative building has been prepared. Pushover analyses have been performed in two directions (parallel and perpendicular to the façades) aiming to identify the typical failure mechanisms and the seismic capacity. The performance of the representative building typology, with its typical heterogeneities and irregularities, is compared with that of a reference regular unreinforced masonry structure. Additionally, a parametric analysis is carried out to evaluate the different seismic response by adding more storeys in height. This work is the basis for future analyses devoted to large scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental and numerical insights on the in-plane behaviour of unreinforced and TRM/SRG retrofitted brick masonry walls by diagonal compression and shear-compression testing

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
The experimental determination of the parameters that characterise the in-plane shear behaviour of masonry structures is still a challenging task. Different authors have identified the key role of tensile strength in the definition of the in-plane shear behaviour of masonry, but unfortunately its direct experimental characterisation is not always feasible, and masonry’s tensile strength needs to be obtained from complex testing methodologies. As a result, tensile strength needs to be assessed from testing setups such as diagonal compression testing and shear compression testing when the failure mode of masonry is featured by tensile diagonal cracking. However, different formulations are available in the scientific literature regarding the interpretation of the experimental results derived from such tests. This work provides new insights on the interpretation of in-plane shear experimental behaviour of double-leaf historical clay brick masonry walls with low strength mortar joints, both unreinforced and retrofitted with textile reinforced mortar and steel reinforced grout. The research evaluates results derived from both testing methodologies, and investigates the potential correlation between them to fully characterise the in-plane shear behaviour of masonry walls. Finally, a numerical model is used to simulate each testing configuration and study the stress state at the centre of the walls to determine the tensile strength and its correlation with the shear strength and the maximum load attained., The authors gratefully acknowledge the financial support from the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities of the Spanish Government, as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The reinforcement systems and construction of the specimens for the experimental programme have been funded by Kerakoll Spa through the RTD project “Seismic Strengthening of Masonry Walls” (Ref. num. A-01278). The authors wish to thank José Luis Sanchez and José Dobón from Kerakoll Spa and Paolo Casadei, for their involvement and support. The support from Agència de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Efficient constitutive model for continuous micro-modeling of masonry structures

  • Petracca, Massimo
  • Camata, Guido
  • Spacone, Enrico
  • Pelà, Luca
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2023, available online at: http://www.tandfonline.com/10.1080/15583058.2022.2124133., Masonry is a composite material often modeled as an equivalent homogenous material. However, the complexity of its micro-structure leads to complex mechanical responses, which are almost impossible to capture accurately with homogenous constitutive models. Micro-modeling can be used in these scenarios, allowing for the explicit modeling of microstructural components, leading to an accurate capturing of their interaction. Its main drawback is the computational cost, which often makes this approach suitable only for the simulation of small specimens. This is especially true due to strain-softening leading to severe instabilities and non-convergence of the solution. The objective of this work is to propose a simple yet effective constitutive plastic-damage model for the microstructural components of masonry. It is based on a damage model previously developed by the authors. For a better representation of the cyclic response of masonry, plasticity is added using a simplified implementation that does not strictly follow the rules of standard elastoplasticity, allowing an explicit computation of the stress tensor from the strain tensor without the need for an iterative loop at the material level. To reduce the numerical issues related to strain-softening and thus improve the stability of the solution, an IM-PLEX integration algorithm is adopted., The last author gratefully acknowledges the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing community resilience, housing recovery and impact of mitigation strategies at the urban scale: a case study after the 2012 Northern Italy Earthquake

  • Basaglia, Alberto
  • Aprile, Alessandra
  • Spacone, Enrico
  • Pelà, Luca
In this paper, the reconstruction process of a town afected by the 2012 Northern Italy Earthquake is analysed using information published on the town journal. Relevant aspects are highlighted, and the housing recovery is compared with that of a nearby city. Then, a what-if scenario is considered, by proposing a set of seismic mitigation strategies. These strategies are applied to a small sub-system of the city and the variation of the buildings’ vulnerability and expected damage is evaluated using a recently introduced methodology for risk assessments at the urban scale. Finally, a cost–beneft analysis is performed to assess the efectiveness of the proposed strategies. The analysis highlights a significant reduction in the expected damage and socioeconomic impact, as well as an increase in the overall performance of the urban system., Open access funding provided by Universitegli Studi G. D’Annunzio Chieti Pescara within the CRUI-CARE Agreement. This work was supported by the FAR funding of the University of Ferrara, 2015, “Historical Centers Livable and Sustainable” (HC-LIVE)” and by the scholarship of the University “G. D’Annunzio” Chieti-Pescara, 2019, “Risk Assessment of the Built Heritage at the Urban Scale” (Ref. Num. 0002299). The fourth Author would like to acknowledge the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI), and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. Num. RTI2018-099589-B-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seismic performance of typical hybrid buildings in the urban centre of Barcelona

  • Dimovska, Sara
  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
Unreinforced existing masonry buildings, located in many historical urban centres, present specific construction characteristics that can have a significant impact on their seismic performance. As these structures are often designed considering only gravity loads before the introduction of seismic codes, they are commonly found to be particularly vulnerable to seismic actions. This work investigates the seismic performance of representative existing masonry buildings located in the Eixample district of Barcelona, Spain. These buildings are characterised by several common structural features, allowing grouping them into building typologies characterised by a similar structural response. The results of a building taxonomy of the specific district manifest the existence of two structural typologies related with the load-bearing system: one with load-bearing slender masonry walls throughout the whole height and a second hybrid one with steel beams and cast-iron columns on the ground floor and unreinforced masonry walls in the upper ones. The second typology is very common because it allows for large open space at the ground floor level, commonly used for commercial or administrative facilities. The drawback of this hybrid structural system is its reduced seismic performance, as the slender piers at the ground floor facilitate the development of a soft-storey mechanism. The main objective of this paper is to evaluate the seismic vulnerability of a typical hybrid building system composed by steel frames on the ground floor and unreinforced masonry at the upper floors. The seismic assessment and the identification of the collapse mechanism of this building typology have been carried out using the Finite Element Method. Seismic loading has been simulated through non-linear static (pushover) analyses in two main directions (parallel and perpendicular to the façades). The results of the numerical analysis allow a better understanding of the seismic performance of hybrid steel-masonry building typologies. This work is part of an ongoing research devoted to a large-scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of recycled limestone filler additions on the mechanical behaviour of commercial premixed hydraulic lime based mortars

  • Segura Domingo, Jorge
  • Aponte Hernández, Diego Fernando
  • Pelà, Luca
  • Roca Fabregat, Pedro
This paper presents an experimental programme aimed at investigating the use of limestone filler additions to modify the mechanical properties of commercial premixed hydraulic lime based mortars. The influence of adding recycled limestone filler was evaluated from the mechanical point of view, i.e. by comparing the experimental compressive and flexural strengths of five different mortar mixes with variable filler contents. The comparison of results shows that, up to a certain amount, the addition of filler provides an improvement of the mortar’s mechanical properties. Beyond this optimum limit, strengths tend to decrease and eventually stabilize. Hence, mortars tested as part of this experimental campaign covered a range of strengths. Consequently, adding limestone filler can serve to adapt the applicability of hydraulic lime mortars to different practical applications, from the conservation of historical buildings to laboratory research on masonry., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonlinear numerical modelling of complex masonry heritage structures considering history-related phenomena in staged construction analysis and material uncertainty in seismic assessment

  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29CF.1943-5509.0001494., This paper presents the systematic use of numerical analysis as a tool for addressing some of the most common challenges encountered in the structural analysis of complex historical masonry structures, i.e. the description of the effects of history-related phenomena and the un-certainty of material properties. The numerical strategy is based on the use of a constitutive model able to describe time-dependent strain accumulation, as well as damaging behaviour un-der different stress states. This constitutive model is combined with a crack-tracking technique to represent tensile crack localization. The numerical model is applied to the study of two im-portant monuments in Spain, i.e. the Mallorca Cathedral and the church of the Poblet Monas-tery. The staged construction analysis of the first case study allows understanding the reasons of its current deformed condition, i.e. critical construction process, strain accumulation given by long-term creep phenomena, and nonlinear geometric effects. The structural analysis of the second case study allows the structural diagnosis of the existing deformation and cracking pat-terns given by architectural alterations, insufficient buttressing of the naves, and past earth-quakes. The application of a probabilistic analysis to the church of the Poblet monastery allows considering the effects of the uncertainties of material properties and numerical parameters in the seismic vulnerability assessment., The authors would like to thank the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban cen-tres ref. num. RTI2018-099589-BI00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi directional pushover analysis of irregular masonry buildings without box behavior

  • Kalkbrenner, Philip
  • Pelà, Luca
  • Sandoval Mandujano, Cristian Eliseo
This paper proposes the use of multiple nonlinear static analyses for the seismic assessment of irregular masonry buildings without box behavior. The methodology consists in executing a series of sequential pushover analyses on the spatial model of the building by rotating the horizontal loading direction from to . The so-called multi directional pushover analysis allows a more realistic evaluation of the seismic vulnerability, since it can represent a higher number of possible failure mechanisms than in the conventional pushover analysis restricted to the two “principal” directions of the structure. The application of the methodology to a highly irregular masonry building located in Chile shows that the detected failure mechanisms are in very good agreement with those derived from nonlinear dynamic analysis, as well as with the damage experienced by the structure after the earthquake of February 27, 2010 (Mw 8.8)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental and numerical study of adhesively and bolted connections of pultruded GFRP I-shape profiles

  • Eskenati, Amir Reza
  • Mahboob, Amir
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
Recent developments indicate that the application of pultruded FRP profiles has been continuously growing in the construction industry. Generating more complex structures composed of pultruded FRP profiles requires joining them. In particular, I-shape glass fiber pultruded profiles are commonly used and the possible joints to connect them should be specifically studied. The mechanical behavior of adhesively and bolted joints for pultruded Glass FRP (GFRP) profiles has been experimentally addressed and numerically modeled. A total of nine specimens with different configurations (bolted joints, adhesive joints, web joints, web and flange joints, and two different angles between profiles) were fabricated and tested, extending the available published information. The novelty of the research is in the direct comparison of joint technologies (bolted vs. adhesive), joint configuration (web vs. flange + web) and angles between profiles in a comprehensive way. Plates for flange joints were fabricated with carbon fiber FRP. Experimental results indicate that adding the bolted flange connection allowed for a slight increase of the load bearing capacity (up to 15%) but a significant increase in the stiffness (between 2 and 7 times). Hence, it is concluded that using carbon FRP bolted flange connection should be considered when increasing the joint stiffness is sought. Adhesively connections only reached 25% of the expected shear strength according to the adhesive producer if comparing the numerically calculated shear strength at the failure time with the shear strength capacity of the adhesive. Apart from assessing adhesive connections, the implemented 3D numerical model was aimed at providing a simplified effective tool to effectively design bolted joints. Although the accurate fitting between experimental and numerical results of the mechanical response, especially the stiffness of the joint, the local failure experimentally observed was not automatically represented by the model, because of the simplified definition of the materials oriented to make the model available for a wide range of practitioners., This research received funding from AZVI, S.A. company and from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centers, ref. num. RTI2018-099589-B-I00)., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexural failure of fabric reinforced cementitious mortar (FRCM) plates under punctual loads: experimental test, analytical approach and numerical simulation

  • Mercedes Cedeño, Luis Enrique
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
Fabric-reinforced cementitious matrix (FCRMs) are composites that produce lighter and more durable strengthening solutions. In this study, carbon and basalt fabrics were used to manufactured FRCM plate specimens. These plates were subjected to a centered punctual load with different punch diameters. Flexural failure mode was observed. Experimental tests showed that carbon and basalt fabrics improved notably the load capacity and the stiffness of mortar plates compared to unreinforced ones. Moreover, failure in the reinforced plates was progressive, preventing the sudden brittle failure of the unreinforced ones. Analytical and numerical models were adjusted and validated from experimental results, and both have proved to be effective calculation tools. What is more, numerical model allowed to determine a sliding tensile stress for the carbon fabric used in this study., Authors want to thanks the research project SEVERUS (RTI2018-099589-B-I00) of the Spanish Research Agency. Authors also want to acknowledge the support provided by Bernat Almenar Muns during experimental testing. Second author is a Serra Húnter Fellow., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of specimen slenderness and stacking on the experimental strength of solid fired clay bricks

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
This study evaluates the effect of the specimen’s slenderness and stacking on the experimental measurement of the compressive strength of solid fired clay units. The experimental campaign has focused on two different types of solid fired clay bricks, namely mechanically extruded and handmade, with a total amount of 382 specimens tested. The research considers different standard and non-standard specimens with varying width (40, 50, 60, 70, 80, 90, and 100 mm) and height (40, 80, and 120 mm). The experimental results evidence the influence of the stacking procedure on the compressive strength, with different results depending on the manufacturing process of the unit. The influence of specimen’s slenderness on the compressive strength is more evident and regular in handmade brick specimens than in extruded ones., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental setup and numerical evaluation of the compression test on thin tiles for masonry timbrel vaults

  • Cabané Cañas, Albert
  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
Compressive tests on clay tiles used in historical masonry timbrel vaults are hindered by the relatively small thickness of the specimens, resulting in buckling or confinement problems depending on the loading direction. This paper presents an experimental campaign and a numerical validation of a novel testing setup for estimating the compressive strength of thin clay tiles used in timbrel vaults. The experimental campaign focuses on two different types corresponding to historical and modern handmade tiles. Experimental and numerical results show that the proposed test setup can be used for the estimation of the compressive strength of thin clay tiles., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Measurement of solid brick compressive strength and anisotropy on non-standard small cubic specimens

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
The final authenticated version is available online at https://doi.org/10.1007/978-3-031-39603-8_48, An experimental research has been carried out on the possibility of measuring the compressive strength of ceramic solid bricks by testing in laboratory non-standardized cubic samples measuring 40 × 40 × 40 mm3. The viability of such approach has been confirmed through a systematic comparison, for a variety of brick types, with compression strength values obtained for the standard prismatic 100 × 100 × 40 mm3 specimen. The comparison has allowed the derivation of a reliable correlation to estimate an equivalent compressive strength based on the 40 × 40 × 40 mm3 spec-imen. The proposed cubic specimen is largely advantageous in the characterization of the compressive strength of exist-ing masonries built with moderately thin bricks (with thickness in the order or 4 or 5 cm). It can be also used to accurately characterize the anisotropy that the manufacturing process can induce in the bricks and its influence on the strength. Taking advantage of this possibility, the paper also presents a detailed investigation on the anisotropy of different brick types., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical simulation of masonry walls strengthened with vegetal fabric reinforced cementitious matrix (FRCM) composites and subjected to cyclic loads

  • Mercedes Cedeño, Luis Enrique
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
The growing concern for the preservation of old buildings and the wide use of masonry in the construction of civil works has led to a great development of specific techniques to strengthen masonry structures. FRCM (fabric reinforced cementitious matrix) of vegetal fibres arises as a strengthening option to be considered because low cost, low density, recyclability and biodegradability brought by vegetal fibres. In this study, numerical models were used to represent masonry walls unreinforced and strengthened with FRCM (hemp, cotton and glass). The numerical model presents a new way of simulation of FRCM systems and their failure pattern. This was validated by comparison to previous experimental and analytical results. Results showed that proposed model is an effective calculation tools to reproduce the maximum shear of masonry walls strengthened with FRCM and subjected to cyclic loads, with variations between 7 and 15% with respect to the experimental and analytical. The numerical model was also useful to reproduce the walls hysteresis behavior, although showed some inability to reproduce the reversible crack opening-closing that was observed in the experimental tests., Authors want to thanks the research project SEVERUS (RTI2018-099589-B-I00) of the Spanish Research Agency. Authors also want to acknowledge the support provided by Bernat Almenar Muns during experimental testing. Second author is a Serra Húnter Fellow., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental testing of solid fired clay bricks in compression: comparison of different bearing surface treatments

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
The conservation and preservation of heritage historical masonry buildings requires the evaluation of their structural capacity against gravity and horizontal actions. This evaluation is normally based on meaningful mechanical properties such as the masonry compressive strength. The compressive strength of masonry is highly dependent on the compressive strength of the components. Specifically the experimental assessment of compressive strength in solid fired clay bricks has long been a topic of debate, with various standards describing different specimen shapes, sizes and bearing surfaces treatment. There is an evi-dent lack of consensus on common criteria and procedures for brick mechanical testing. This research focuses on evaluating the compressive strength of two types of solid clay bricks, corresponding to mechanically extruded ones and traditionally handmade bricks by moulding. The reference standards considered are the Amer-ican ASTM C67, the European EN 772-1, the Australian AS/NZS 4456:4, and the Canadian CAN/CSA A82. These standards encompass different specimen shapes, such as whole or half bricks and 100 × 100 × 40 mm3 specimens subjected to various bearing surface treatments, including grinding, capping with cement mortar or gypsum plaster, and placing with birch plywood or fiberboard. Addi-tionally, a novel bearing surface treatment involving the placement of two oiled PTFE sheets on each specimen loading surface is proposed. The experimental campaign focuses on evaluating the compressive strength based on a comparison of the results obtained using the reference standards. The results highlight and quantify the variations in compressive strength obtained for the same type of solid fired clay brick when different reference standards are considered. In addition, the results reveal the potential of using PTFE sheets as a promising possibility for brick mechanical characterization. The PTFE sheets cause very low friction at the specimen-platen surface and therefore allow the measurement of strength values not influenced by the specimen shape., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary ap-proach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evalu-ation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

In-plane shear behaviour by diagonal compression testing of brick masonry walls strengthened with basalt and steel textile reinforced mortars

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
This paper presents an experimental study of the structural behaviour of masonry walls retrofitted with Textile Reinforced Mortar (TRM) to improve their in-plane shear strength and deformation capacity. The experimental programme consists in diagonal compression testing of ten specimens of clay brick and lime mortar masonry retrofitted with three different TRM systems: i) continuous bidirectional grids of basalt TRM, ii) discrete bands of unidirectional steel TRM and iii) continuous basalt TRM on the wall’s inner face and bed joints structural repointing with near surface mounted helical stainless steel bars on the wall’s outer face. Two of the specimens were tested two times, i.e. in the unreinforced condition and subsequently in the repaired configuration including basalt TRM retrofitting. The experimental results show that the adopted TRM solutions produce a beneficial increase of shear resistance and ductility, making them suitable for seismic retrofitting and post-earthquake repair., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Validation of non-linear equivalent-frame models for irregular masonry walls

  • Camata, Guido
  • Marano, Corrado
  • Sepe, Vincenzo
  • Spacone, Enrico
  • Siano, Rossella
  • Petracca, Massimo
  • Roca Fabregat, Pedro
  • Pelà, Luca
This article compares the results obtained from the analyses of seven two-story masonry walls with an asymmetric arrangement of the openings. The walls are modelled with finite elements detailed micromodels and equivalent frame models. The equivalent frame model reliability is evaluated by comparing the results obtained with the two modelling strategies assuming the detailed micromodel’s results as reference. Namely, the equivalent frame models of the walls, subjected to nonlinear static analyses, were developed in Scientific Toolkit for OpenSees (STKO) and the OpenSees framework using a macroelement, widely accepted by the literature. The macroelement is based on the idealization of the equivalent frame model with fiber modeling of wall panels to capture bending behavior and a phenomenological law to describe shear behavior. It also provides a model for comparison and validation able to correctly describe the nonlinear behavior of fragile materials that exhibit softening in the response. The micromodeling approach was used as the reference as it is particularly efficient from a computation point of view. The numerical models were validated by comparing pseudo-static experimental tests present in the literature concerning walls with a symmetric arrangement of openings. After the preliminary calibration, the numerical comparisons of the irregular walls generally demonstrate a good correspondence between the equivalent frame model and finite element results. The most relevant differences arise for the walls with masonry panels that exhibit a mixed compression-shear damage mechanism because the simplified frame model cannot capture both behaviors, as it privileges the mechanism that activates first. The differences between the maximum shears, however, range from approximately 1% to 12%., The present research has received financial support from the University “G. D’Annunzio” of Chieti-Pescara and from the ReLUIS program 2014-2021. The last two authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cylindrical samples of brick masonry with aerial lime mortar under compression: experimental and numerical study

  • Pelà, Luca
  • Saloustros, Savvas
  • Roca Fabregat, Pedro
This research presents an experimental and numerical study focusing on the compression test of cylindrical samples core drilled from existing masonry walls. This method is suitable for the minor destructive assessment of the mechanical properties of historical masonry, like that composed of aerial lime mortar joints and solid clay bricks. This particular material combination, frequently found in the vast majority of the built cultural heritage, was utilized to build representative specimens that were stored in the laboratory for one year until their testing. Cylindrical samples of 150 mm diameter were extracted from the masonry walls by using a dry core-drilling procedure, and then regularized to be tested under compression in the laboratory. A comparison is presented between the experimental results on cylindrical samples and those obtained from standard compression tests on prismatic samples consisting in stack bond prisms. Numerical simulations by finite element micro-modelling of the compression tests on the core samples were carried out to investigate the experimental behaviour of the specimens and evaluate the compressive strength of the material from this nonstandard technique. The combined experimental and numerical study allows the assessment of important mechanical parameters for the compressive characterisation of masonry composed of aerial lime mortar joints and solid clay bricks., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental and numerical study of shear interface response of hybrid thin CFRP–concrete slabs

  • Mahboob, Amir
  • Gil Espert, Lluís
  • Bernat Masó, Ernest
  • Eskenati, Amir Reza
Hybrid slabs made of carbon-fiber-reinforced polymer (CFRP) and concrete provide a solution that takes advantage of the strength properties of both materials. The performance of the system strongly depends on the CFRP–concrete interaction. This study investigates the shear behavior in the interface of the two materials. Eight full-scale experiments were carried out to characterize the interface shear response of these hybrid elements using different connection solutions. An untreated surface is compared to a surface with aggregates, with a novel system comprising a flexible, straight glass fiber mesh and an inclined glass fiber mesh. The experimental results show that the fabric connection improves the friction between materials and is responsible for the pseudo-plastic performance of the specimens. The inclined mesh produces a more uniform tightening effect compared to the straight mesh. In simulations via the finite element method, we used an adjusted frictional model to reproduce the experiments., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), and the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centers, ref. num. RTI2018-099589-B-I00). Moreover, we acknowledge partial financial support from the AZVI, S.A. company through the COMPOSITO project., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Machine-learning model for the determination of macro-scale masonry properties based on a virtual laboratory at micro-scale

  • Kalkbrenner, Philip
  • Pelà, Luca
  • Rossi, Riccardo
Cutting-edge methods in the computational analysis of structures have been developed over the last decades. Such modern tools are helpful to assess the safety of existing buildings. Multi-scale techniques have been proposed to combine the accuracy of micro-modelling and the computational efficiency of macro-modelling. Machine-learning tools have been utilized successfully to train specific models by feeding big source data from different fields, e.g. autonomous driving, face recognition, etc. This research proposes a continuous nonlinear material law that can reproduce data from micro-scale analysis. The proposed method is based on a machine-learning tool that links the two scales of the analysis by training a macro-model smeared damage constitutive law through benchmark data from numerical tests derived from micro-models., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling of in-plane seismic behaviour of one-way steel or timber jack arch floors in existing buildings: application to the Eixample district of Barcelona

  • Dimovska, Sara
  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
The type of floor system has a decisive role in the seismic performance of unreinforced masonry buildings. The in-plane stiffness of the floors has to be adequately represented in the numerical modelling of existing buildings, as it can influence their seismic capacity. This paper investigates the seismic behaviour of one-way arch floor systems composed of steel or timber beams, and ceramic tile vaults. The main objective of the research is to provide a numerical procedure for the simplified modelling of jack arch floor systems in the seismic assessment of unreinforced masonry buildings. The presented approach aims to provide values for the orthotropic properties of simplified floor models composed of elastic 2D shell elements. The orthotropic elastic properties are computed and calibrated by means of comparisons with detailed 3D nonlinear models of the floors. The case study is a multi-storey existing masonry building of the historical “Eixample” district in Barcelona, which includes one-way arch floor systems. The Finite Element Method has been used for the numerical simulation of the seismic performance through nonlinear static (pushover) analyses. The results of the study contribute to a better understanding of the effect of the behaviour of one-way floors with steel or timber beams and tile vaults on the seismic response of masonry buildings. This work provides indicative values for the proper modelling of these particular floor slabs. The proposed methodology is also applicable to the numerical simulation of any other one-way floor system., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The first author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the financial support of her predoctoral grant., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.5 - Per a 2030, reduir de forma significativa el nombre de morts causades per desastres, inclosos els relacio­nats amb l’aigua, i de persones afectades per aquests, i reduir substancialment les pèrdues econòmiques directes causades per desastres relacionades amb el producte interior brut mundial, fent un èmfasi especial en la protecció de les persones pobres i de les persones en situacions de vulnerabilitat, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental cyclic behaviour of shear masonry walls reinforced with single and double layered Steel Reinforced Grout

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
Recent research on the mechanical characterisation of Steel Reinforced Grout (SRG) has highlighted its excellent performance as strengthening solutions for masonry structures. Using SRG with limited fabric density ensures a good textile-matrix interlocking, preventing at the same time the failure due to slippage or debonding from the substrate. This paper presents an experimental investigation on the use of SRG as in-plane strengthening solution for shear masonry walls composed of handmade solid clay brick and hydraulic lime mortar. Cyclic shear compression tests were carried out on walls strengthened with SRG comprising low density steel sheets (LDS). The SRG was applied on both faces of the walls with a strip configuration, using one and two layers of LDS. The experimental programme aimed to study the influence of the number of textile layers on the in-plane response of strengthened masonry walls in terms of failure mechanism, load-bearing capacity, energy dissipation, and ductility., The authors gratefully acknowledge the financial support from the Ministry of Economy and Competitiveness, Spain and from the Ministry of Science, Innovation and Universities of the Spanish Government, as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. num. RTI2018-099589-B-I00). The reinforcement systems and construction of the specimens for the experimental programme have been funded by Kerakoll Spa through the RTD project “Seismic Strengthening of Masonry Walls” (Ref. num. A-01278). The authors wish to thank Paolo Casadei, José Luis Sanchez and José Dobón from Kerakoll Spa for their involvement and support. The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya, Spain through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The inspection by minor destructive testing in projects of adaptive reuse of historical masonry buildings and design of green rooftops in Barcelona

  • Pelà, Luca
  • Cabané Cañas, Albert
  • Cuadros Rojas, Emerson Julio
  • Garcia Ramonda, Larisa
  • Roca Fabregat, Pedro
The mechanical characterisation of existing masonry in historical structures encounters several technical dif-ficulties due to the complexity and heterogeneity of this traditional material, as well as to the need for respectful inspec-tion activities able to preserve the cultural heritage value of the building. This paper presents and discusses different Minor Destructive Testing (MDT) techniques oriented at estimating, either in-situ or in the laboratory, the mechanical properties of masonry at the level of components, such as units, tiles, and mortar joints, and at the level of the composite material. The research addresses different issues related to the execution of laboratory tests on sampled historical mate-rials, such as selection of the size and shape of specimens, different types of treatments for the sample, testing protocols, and experimental setup. The complementary use of Finite Element Method (FEM) models represents a valuable activity to provide a good understanding of the experimental behaviour exhibited by the specimens, and especially concerning the execution of non-standard laboratory tests. The possibility of in-situ MDT is explored considering techniques based on different portable instruments, previously calibrated through ad-hoc experimental programs under controlled labora-tory conditions. The research is based on a high number of tests executed at the UPC within the context of several experimental programs linked to projects of adaptive reuse of existing masonry buildings and design of green rooftops in Barcelona., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional De-velopment Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). The first author gratefully acknowledges the owners of the historical buildings investigated, as well as people from the institutions and companies involved in the studies and projects mentioned in this work and in particular Sergio Carratalá from MataAlta. The second and third authors gratefully acknowledge the Spanish Ministry of Science, Innovation and Universities, and the AGAUR agency of the Generalitat de Catalunya, for the financial support of their predoctoral grants., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.2 - Incorporar mesures relatives al canvi climàtic en les polítiques, les estratègies i els plans nacionals, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Historical development and seismic performance of unreinforced masonry buildings with vertical extensions in the city centre of Barcelona

  • Marafini, Francesca
  • Dimovska, Sara
  • Saloustros, Savvas
  • Cornadó Bardón, Còssima
  • Roca Fabregat, Pedro
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2022, available online at: http://www.tandfonline.com/10.1080/15583058.2022.2096513, This paper presents the historical development of the vertical extensions of unreinforced masonry buildings in the Eixample district of Barcelona and their impact on the seismic behaviour. Existing masonry buildings of Eixample present significant seismic risk because, despite the low to moderate seismic hazard of Barcelona, they show a marked vulnerability given their average height of six storeys and the substantial slenderness of the walls. Between the end of the 19th century and the beginning of the 20th century, the vertical extensions, known as remuntes in Catalan, were a common solution to the increasing demographic demand of the city. In their majority, these vertical extensions add a structural irregularity that represents a potential vulnerability factor not yet investigated. The present study focuses on Eixample’s remuntes, including their historical development, the description of their structural features, and the identification of their most representative configurations in the existing building stock. A seismic analysis based on the Finite Element Method is presented on a reference model without extensions and three others with the most recurrent configurations of remuntes. The seismic response is investigated through pushover analysis. The results provide a better understanding of the negative impact of the vertical extensions on the seismic performance., This work was supported by the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU) [RTI2018-099589-B-I00], the State Agency of Research (AEI) [RTI2018-099589-B-I00] and the European Regional Development Fund [RTI2018-099589-B-I00]; through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres [RTI2018-099589-B-I00]; Agència de Gestió d'Ajuts Universitaris i de Recerca; MSc SAHC Consortium scholarship; Sapienza University of Rome., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance of hemp-FRCM-strengthened beam subjected to cyclic loads, Comportamiento de vigas reforzadas con cáñamo FRCM bajo cargas cíclicas

  • Mercedes Cedeño, Luis Enrique
  • Mendizábal Dinucci, Virginia Dolores
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
Fabric-reinforced cementitious matrix (FRCM) composites are materials that are usually applied to strengthen existing structures. In this study, a hemp mesh coated with epoxy was manufactured and combined with a cementitious matrix to strengthen a concrete beam. This beam was subjected to bending cyclic loading tests and a nondestructive modal analysis test. The modal analysis was performed to determine the dynamic elastic properties of the beam under pre-cracking, post-cracking, and strengthened conditions. The beam stiffness increased following strengthening with hemp-FRCM. The results of the experimental cyclic loading test showed that the hemp-FRCM system improved the load-bearing capacity of the beam at the service limit state by 42%. Analytical and numerical models were adjusted and validated using the experimental results, and both proved to be effective calculation tools. The models accurately reproduced the behaviour of the FRCM-strengthened concrete beam if the strengthening connection could prevent sliding and mortar debonding failures., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Accurate and locking-free analysis of beams, plates and shells using solid elements

  • Saloustros, Savvas
  • Cervera Ruiz, Miguel
  • Kim, Sungchul
  • Chiumenti, Michele
The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-020-01969-0., This paper investigates the capacity of solid finite elements with independent interpolations for displacements and strains to address shear, membrane and volumetric locking in the analysis of beam, plate and shell structures. The performance of the proposed strain/displacement formulation is compared to the standard one through a set of eleven benchmark problems. In addition to the relative performance of both finite element formulations, the paper studies the effect of discretization and material characteristics. The first refers to different solid element typologies (hexahedra, prisms) and shapes (regular, skewed, warped configurations). The second refers to isotropic, orthotropic and layered materials, and nearly incompressible states. For the analysis of nearly incompressible cases, the B-bar method is employed in both standard and strain/displacement formulations. Numerical results show the enhanced accuracy of the proposed strain/displacement formulation in predicting stresses and displacements, as well as producing locking-free discrete solutions, which converge asymptotically to the corresponding continuous problems., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) via: the ADaMANT project (Computational Framework for Additive Manufacturing of Titanium Alloy, Proyectos de I+D -Excelencia-, ref. num. DPI2017-85998-P); the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00); and the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2018-000797-S). Sungchul Kim gratefully acknowledges the support received from the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) and the European Social Fund (ESF) through the predoctoral FI grants (ref. num. 2019FI_B00727)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Challenges posed by computational modelling and nonlinear analysis of complex historical masonry structures

  • Pelà, Luca
  • Saloustros, Savvas
  • Roca Fabregat, Pedro
This study analyses some of the most common challenges encountered in numerical modelling and nonlinear analysis of complex historical masonry structures of the built cultural heritage. The research highlights the need for preliminary activities, including historical investigation, inspection, and structural health monitoring, to support the advanced computations by means of essential empirical data for model calibration and validation. This multidisciplinary scientific approach allows drawing optimum conclusions from the structural analysis, in order to plan future studies or interventions respectful of the heritage value of the historical building. The study presents a numerical model, specifically developed for complex historical masonry constructions, able to describe the time-dependent strain accumulation in the material due to long-term exposure to constant stress, as well as the damaging behaviour under different stress states. The resulting coupled viscoelasticity and tension-compression continuum damage model is characterised by several advantages, especially in terms of simplicity and computational efficiency. The strain driven format, the reduced number of internal variables and input parameters make the model suitable for the numerical analysis of large historical structures, such as churches or cathedrals. The proposed constitutive model is combined with a crack-tracking technique to represent tensile crack localization, allowing a more realistic description of damage phenomena and mesh-objective results. In this work, the numerical model is applied to the study of two important monuments in Spain, i.e. Mallorca Cathedral and the church of the Poblet Monastery (UNESCO World Heritage Site). The structural analysis of the first case study allows understanding the reasons of its current deformed condition, i.e. critical construction process, strain accumulation given by long-term creep phenomena, and nonlinear geometric effects. The structural analysis of the second case study allows the structural diagnosis of the existing deformation and cracking patterns, given by architectural alterations experienced by the monument in the past, insufficient buttressing of the naves, and effects of past earthquakes. In both studies, the results of the advanced numerical results, fully supported and validated by the empirical evidence from experimental activities, motivate the development of future studies based on continuous structural health monitoring, now under consideration., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Laboratory and in-situ mechanical characterisation of masonry components by comparing destructive and minor destructive testing techniques

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
The safeguard of existing masonry buildings requires a meticulous characterisation of the component materials (units and mortar) by using in-situ minimally intrusive techniques. This need is especially prominent in the case of heritage buildings in order to minimize their damage and alteration. This paper presents a research on some minor destructive techniques (MDT) for the in-situ evaluation of the mechanical properties of masonry components. In the research, the results derived from MDT were empirically correlated with the compressive strength obtained by using well-known destructive testing (DT) techniques executed in the laboratory. The experimental campaign focused on two different MDT techniques, namely the Pin Penetration Test (PPT) and the Helix screw Pull-out Test (HPT). The PPT is based on the measurement of the depth of penetration of a steel pin. The HPT is based on the measurement of the pull-out load necessary to extract a steel tie inserted into a hole drilled in a brick or in a mortar joint. The experimental campaign also included an evaluation of the Double Punch Test (DPT) by comparison with strength values obtained from mortar specimens prepared and tested following the standard EN 1015–11. The experimental results show a satisfactory agreement between the MDT measurements and the compressive strength obtained with DT. Although both the PPT and HPT are useful for the evaluation of the compressive strength of masonry components, the former exhibits a lower scattering in the experimental measurements., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary approach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged, Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bending and compression performance of full-scale sandwich panels of hemp fabric reinforced cementitious matrix

  • Mercedes Cedeño, Luis Enrique
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
Sandwich panels composed of fabric-reinforced cementitious matrix (FRCM) and extruded polystyrene foam (EPS) represent a light and insulating solution compared with other types of enclosure walls, such as steel-reinforced concrete (RC) panels. To improve the sustainability and lightness of FRCM sandwich panels used for building enclosures, this study proposes the use of hemp fabrics in contrast to glass fabrics. Modal analysis and bending and compression tests were conducted on full-scale panels with hemp- and glass-FRCMs. The results obtained from these tests indicate that the use of hemp fabrics with greater equivalent thickness and deformation capacity than glass fabrics make the production of ductile and strength (35 % more than glass-FRCM) sandwich panels possible. Nevertheless, glass-FRCMs allow the production of more stiffened panels. In addition, this study presents a simplified analytical model of sandwich FRCM panels based on the definition of cracked section strength, which is useful in the case of full composite action in the sandwich solution., This study has been partially carried out within the project ‘‘Desarrollo de paneles industriales prefabricados tipo sándwich con materiales compuestos de matriz cementicia (FRCM) y con digitalizacion ´ BIM incorporada. PANELPLUS’’, funded by the Spanish Ministry of Science, Innovation and University through the Torres Quevedo program. The materials support of Sika AG and Mapei Spain S.A. is acknowledged. Authors want to thanks the research project SEVERUS (RTI2018- 099589-B-I00) of the Spanish Research Agency. Second author is a Serra Húnter Fellow., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Photogrammetry-aided numerical seismic assessment of historical structures composed of adobe, stone and brick masonry: application to the San Juan Bautista Church built on the Inca temple of Huaytará, Peru

  • Cuadros Rojas, Emerson Julio
  • Saloustros, Savvas
  • Tarque Ruiz, Sabino Nicola
  • Pelà, Luca
This research presents a cost-effective surveying methodology to assist the seismic assessment of complex heritage buildings, based on terrestrial structure-from-motion (SfM) photogrammetry. The method was applied to the study of the seismic performance of the church of San Juan Bautista – Inca temple of Huaytará, Peru, an emblematic case study due to its complex architecture and coexistence of different construction materials. The geometrical model for the seismic assessment was developed with an error of less than 2¿% using SfM photogrammetry. Non-linear static pushover analyses were performed on 3D FEM models of the nave and the towers to evaluate their individual response under seismic loading. Mechanical properties of different structural materials of the church were evaluated based on laboratory experimental tests on mortar and adobe, contemporary and ancient fired brick, Inca stone, colonial stone and rubble stone units. Non-linear pushover analyses were conducted in four directions perpendicular to the perimeter walls, and the response of the structure was compared with the seismic demand specified in Peruvian Standards. The simulations show that damage-prone areas are the western and eastern facades, with cracking at the connections between orthogonal walls, as well as at the interface of adobe masonry with Inca stone masonry. The towers exhibit similar seismic response, with lower strength capacities compared to the main nave. In this case, flexural overturning mechanisms and cracking at the interface between stone and adobe masonry were observed. The displacement-based seismic assessment using the N2 method shows that a peak ground acceleration of 0.21¿g could lead to the collapse of the north and south facades of the main nave. The towers showed a much smaller capacity with PGA leading to collapse of approximately 0.09¿g. Overall, this study contributes to the understanding of the seismic performance of the Huaytará-Huancavelica church, highlighting vulnerabilities and providing valuable information for its preservation and future interventions. Future investigations should focus on on-site tests that will allow the estimation of the effect of existing damage on the structural response and their incorporation in the numerical model., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The first author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the financial support of his predoctoral grant, the PRONABEC program by the Peruvian Government for the financial support of his master studies and the in-situ activities of the research, and Oliver Cuadros for his support in the photogrammetric modelling., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Automated data analysis for static structural health monitoring of masonry heritage structures

  • Makoond, Nirvan Chandra
  • Pelà, Luca
  • Molins i Borrell, Climent
  • Roca Fabregat, Pedro
  • Alarcón Fernández, Daniel
This is the peer reviewed version of the following article: [Makoond, N, Pelà, L, Molins, C, Roca, P, Alarcón, D. Automated data analysis for static structural health monitoring of masonry heritage structures. Struct Control Health Monit. 2020; 27:e2581. https://doi.org/10.1002/stc.2581], which has been published in final form at https://onlinelibrary.wiley.com/doi/epdf/10.1002/stc.2581. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., Masonry heritage structures are often affected by slow irreversible deterioration mechanisms that can jeopardise structural stability in the foreseeable future. Static structural health monitoring (SHM), aimed at the continuous measurement of key slow-varying parameters, has the potential to identify such mechanisms at a very early stage. This can greatly facilitate the implementation of adequate preventive and remedial measures, which can be critical to ensure that such structures are preserved for generations to come. However, because monitored parameters usually experience reversible seasonal variations of the same order of magnitude as changes caused by active mechanisms, identification of the latter is often a difficult task. This paper presents a fully integrated automated data analysis procedure for complete static SHM systems utilising dynamic linear regression models to filter out the effects caused by environmental variations. The method does not only produce estimated evolution rates but also classifies monitored responses in predefined evolution states. The procedure has successfully been used to identify vulnerable areas in two important medieval heritage structures in Spain, namely, the cathedral of Mallorca and the church of the monastery of Sant Cugat., Ajuntament de Sant Cugat through a project aimed at monitoring the Monastery of Sant Cugat, ref. num. C-10764. Ministry of Education, Culture and Sports of the Spanish Government through a project aimed at studying the structural condition of Mallorca Cathedral, ref. num. 2/131400106ca - 5/030300592 EF. AGAUR agency of the Generalitat de Catalunya and European Social Fund, through a predoctoral grant awarded to the corresponding author. Ministry of Science, Innovation and Universities of the Spanish Government and European Regional Development Fund through the SEVERUS project, ref. num. RTI2018-099589-B-100., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A risk index for the structural diagnosis of masonry heritage (RISDiMaH)

  • Makoond, Nirvan Chandra
  • Pelà, Luca
  • Molins i Borrell, Climent
Experts responsible for the safety evaluation of unique masonry heritage structures usually need to weigh information from various diagnosis activities before deciding the best course of action for preservation. Typical sources of valuable information are historical and in-situ surveys and inspections, minor and non-destructive testing, structural health monitoring, and structural analysis, among others. Due to the complexity of the problem and singular aspects of monuments, these decisions are challenging and often made solely on the basis of expert judgement. A systematic risk assessment procedure is proposed involving the computation of two indices to facilitate the decision-making process: an index related to the estimated risk of damage, and another to the uncertainty behind this estimation. Results from applying the procedure to several case studies are provided to demonstrate its usefulness., This research has received the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The corresponding author gratefully acknowledges the AGAUR agency of the Generalitat de Catalunya for the nancial support of his predoctoral grant. The authors would like to thank Professor Pere Roca for providing diagnostic reports of several masonry heritage structures for this research. Besides, the authors are also grateful to Irene Josa for coming up with the acronym RISDiMaH., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Laboratory and in-situ characterisation of masonry materials in a large historical industrial building in Barcelona

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
This paper presents an experimental campaign carried out in an historical industrial building of Barcelona from the 19th century, considering in-situ and laboratory minor destructive testing (MDT) techniques. The results obtained showed a good relationship between the in-situ MDT techniques and the tests carried out in the laboratory. The experimental results from different portions of the large-scale building allowed the discovery of different material typologies deriving from different construction phases., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust estimation of axial loads sustained by tie-rods in historical structures using Artificial Neural Networks

  • Makoond, Nirvan Chandra
  • Pelà, Luca
  • Molins i Borrell, Climent
Widely used simplified analytical methods for estimating the tensile force in tie-rods are clearly not applicable when they contain significant discontinuities or irregularities. A common example for which this fact becomes relevant in practice is the use of connectors to unify historical ties consisting of several segments. To address this challenge, a robust hybrid methodology is proposed which can be applied to any historical tie by employing a data-driven approach to a dataset generated using the finite element method. The methodology is applied to a real case study involving two historical ties., The authors disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Servei del Patrimoni Arquitect`onic of the Generalitat de Catalunya through a project (managed by the City Council of Sant Cugat) aimed at monitoring the church of the Monastery of Sant Cugat [grant number C-10764]; the Ministry of Science, Innovation and Universities of the Spanish Government and the ERDF (European Regional Development Fund) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres) [grant number RTI2018-099589-B-I00]; and the AGAUR agency of the Generalitat de Catalunya in the form of the predoctoral grant of the first author., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of cross section aspect ratio and bearing surfaces treatment on the compressive strength of solid fired clay brick specimens

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
This study addresses the evaluation of the confinement effect in the experimental determination of compressive strength in solid fired clay units. The experimental campaign has focused on two different types of solid fired clay bricks, namely mechanically extruded and handmade, with a total amount of 458 specimens. The research considers different standard specimens, such as whole or half brick, and 100 × 100 × 40 mm3 specimen, and nonstandard 40 × 40 × 40 mm3 specimen, subjected to different standard bearing surface treatments, i.e. grinding, capping with cement mortar or gypsum plaster, placing with birch plywood or fibreboard. Additionally, two novel bearing surface treatments are proposed, i.e. covering with gypsum powder, and placing two oiled PTFE leaves. The experimental campaign has focused on four main aspects. First, the evaluation of the compressive strength value in specimens with hardening response. Second, the influence of the cross section’s aspect ratio, defined as the ratio between the specimen’s length and width. Third, the influence of the bearing surface treatment on the determination of the compressive strength. Fourth, the evaluation of the standard compressive strength through the comparison amongst reference standards. The results highlight and quantify the different factors that influence the confinement, while detecting differences depending on the manufacturing process of the unit. In addition, the results reveal the use of oiled PTFE leaves as a promising and fast possibility of low boundary friction to obtain the strength regardless of the specimen shape., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical simulation of traditional timber-masonry buildings subjected to lateral loads

  • Jiménez Ramírez, María Belén
  • Pelà, Luca
Existing heritage buildings are often composed of diverse structural typologies, representing a challenge for structural analysis. This work investigates the use of nonlinear static analysis to assess the seismic behaviour of hybrid timber-masonry buildings. The proposed methodology includes the use of Lumped Plasticity Models (LPM) and Macro-Mechanical Finite Element (FE) approaches to simulate the response of structures composed of timber frames and masonry walls. Benchmark experiments on timber and masonry specimens subjected to lateral loads are used to calibrate the constitutive laws governing the behaviour of the proposed models. The calibrated models are used to appraise the seismic response of an existing timber-masonry building located in the historical centre of Valparaíso (Chile). The results predict the nonlinear acceleration-displacement capacity of the buildings, as well as the expected damage of the structure, revealing the potential local and global failure mechanisms., This research has received the financial support from the ELARCH project (Euro-Latin America partnership in natural Risk Mitigation and protection of the Cultural Heritage), reference number 552129-EM-1-2014-1-IT- ERASMUS MUNDUS EMA21, funded with support of the European Commission. This document reflects the view of the authors, and the Commission cannot be held responsible for any use that may be made of the information contained therein. The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental and numerical insights on the diagonal compression test for the shear characterisation of masonry

  • Segura Domingo, Jorge
  • Pelà, Luca
  • Saloustros, Savvas
  • Roca Fabregat, Pedro
The masonry tensile strength and shear modulus play a key role in the definition of the shear capacity of masonry structures. These properties are often determined experimentally by means of the diagonal compression test on square walls, which is regulated by the ASTM E519 standard. In spite of its wide use, the interpretation of the test is still controversial and no universal criterion exists on how to derive the masonry mechanical properties from the wall overall strength. Aiming to contribute in the improvement of the test’s reliability and interpretation, this paper presents an investigation on the use of the diagonal compression test to characterize the shear properties of masonry. First, an experimental campaign on brickwork walls is described. The walls were built in laboratory in Flemish bond, a pattern that has been scarcely investigated in the available research studies on this type of test. Second, an advanced numerical model is used for the analysis of walls subjected to the diagonal compression test. The adopted numerical model, enhanced by a crack-tracking algorithm to reproduce accurately the tensile damage localization, constitutes a very useful and powerful tool to interpret correctly the behaviour during the test. Finite element analysis was executed to interpret the walls’ response in the linear and nonlinear ranges with models properly calibrated by comparison with the experimental results. As a result, a criterion was determined for the calculation of the tensile strength from the outcomes of the diagonal compression test. A sensitivity analysis was carried out with regard to the most influent material properties of the material, the geometrical dimensions of the panel, and the loading conditions of the testing setup. The findings of this research were finally applied and validated by means of simulations of diagonal compression tests from eight experimental campaigns performed by other authors on different masonry typologies., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged. The authors wish to thank Paolo Casadei, José Luis Sánchez and Patricio Contreras from KERAKOLL for providing part of the materials used in the experimental campaign. The authors would like also to acknowledge Guido Camata for the fruitful discussions, and Larisa Garcia-Ramonda for the collaboration during the execution of the tests., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Matrix and fabric contribution on the tensile behaviour of fabric reinforced cementitious matrix composites

  • Mercedes Cedeño, Luis Enrique
  • Castellazzi, G.
  • Bernat Masó, Ernest
  • Gil Espert, Lluís
Fabric reinforced cementitious matrix (FRCM) are a type of sustainable materials for structures strengthening and envisaging to develop new construction solutions. However, the wide range of possible combinations of fabric and cementitious matrixes makes it necessary to study the particular contribution of mortar and fabric in the composite action of the FRCM. In this line, this study presents the experimental, analytical and numerical evaluation of the tensile behaviour of FRCM composites. 85 FRCM specimens of different thicknesses were manufactured, with one or two embedded fabrics of different type of fibres and geometry. Fabrics made of coated vegetal fibres were also considered to be compared with commercial fabrics of coated synthetic fibres. The results show a significant increase of the ultimate tensile strength with the increase of the FRCM thickness due to a residual contribution of the mortar after the cracking stage. The analytical model was effective for the cases that showed a cracking stabilization stage. However, the numerical model allows a closer approximation to experimental results because of considering the mortar contribution in the post-cracking stage., This study has been partially financed by the “European Union – NextGenerationEU”, through the Margarita Salas program, from the Spanish Ministry of Universities. The materials support of Sika AG and Mapei Spain S.A. is acknowledged. Authors want to thanks the research project SEVERUS (RTI2018- 099589-B-I00) of the Spanish Research Agency. Third author is a Serra Húnter Fellow., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry

  • Segura Domingo, Jorge
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Cabané Cañas, Albert
This paper presents the results of an experimental programme about the evaluation of the size effect on the compressive behaviour of cylindrical samples of existing masonry. The study focuses on the in-situ coring and experimental testing of core specimens with 150 mm and 90 mm diameter. The 150 mm cylinder, recurrent in minor destructive evaluation of the compressive strength of existing masonry, includes four brick pieces, two mortar beds and one head joint. The 90 mm specimen includes one mortar bed and two segments of brick, and inflicts less damage on the inspected structural member due to its lower invasivity. The experimental research investigates the size effect on four different types of clay brick masonry. The first type was built in the laboratory using historical-like materials. The other three types of masonry belong to structural walls of existing historical buildings. The combination of experimental results from laboratory controlled materials and existing historical members shows that the size of the cylindrical specimen has regular effect on the compressive strength and the Young’s modulus. The consistent relationship found between the compressive strengths of the 150 mm and 90 mm core samples allows the use of the latter specimen for a more respectful inspection of existing structural masonry., Peer Reviewed, Postprint (author's final draft)