Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 113
Encontrada(s) 2 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensitivity of delay Doppler map in spaceborne GNSS-R to geophysical variables of the ocean

  • Camps, Adriano
  • Park, Hyuk
Global Navigation Satellite Systems reflectometry (GNSS-R) is a particular case of a multistatic radar in which the signals transmitted by navigation satellites are the signals of opportunity. These signals can be processed as a radar scatterometer, as a radar altimeter, or as an unfocused synthetic aperture radar. GNSS-R has shown its potential to infer numerous geophysical variables: over land soil moisture, vegetation height, detection of freeze-thaw state, etc., map sea ice extent and type…, and over the ocean wind speed and direction, significant wave height, altimetric measurements or even more recently NASA has released a marine plastics litter product, and some also claim that sea surface salinity (SSS)canbeinferred.Inaddition,retrievalalgorithmsneglectsome of the variations of the delay Doppler map (DDM) that are linked to the observation geometry, i.e., look angle with respect to the speed vectors of the transmitter and receiver. All these different effects impact the DDM peak value and its shape, and may affect the retrieval of geophysical parameters, and ultimately the data interpretation. In this study, the following factors impacting the DDM peak value are studied: the observation geometry, the sea surface temperature, and SSS, the 10 m height wind speed (U10) and direction (WD), the presence of foam, the sea development state, the presence of swell, currents, rain, and the presence of oil slicks perturbing the sea surface roughness. This illustrates the complexityofthechallengespresentedwhentryingtoretrievesome of these variables, the required corrections, and their accuracy., This work was supported in part by the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021-2023 (Spain) under Grant PID2021-126436OB-C21, in part by the European Social Fund, and in part by the GENESIS: GNSS Environmental and Societal Missions–Subproject UPC under Grant PID2021-126436OB-C21. (Corresponding author: Adriano Camps.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A unified formulation for the computation of the six-degrees-of-freedom-motion-induced errors in floating doppler wind LiDARs

  • Salcedo-Bosch, Andreu
  • Farré-Guarné, Joan
  • Araújo da Silva, Marcos P.
  • Rocadenbosch, Francesc
This article belongs to the Section Atmospheric Remote Sensing., This work presents an analytical formulation to assess the six-degrees-of-freedom-motion-induced error in floating Doppler wind LiDARs (FDWLs). The error products derive from the horizontal wind speed bias and apparent turbulence intensity. Departing from a geometrical formulation of the FDWL attitude and of the LiDAR retrieval algorithm, the contributions of the rotational and translational motion to the FDWL-measured total error are computed. Central to this process is the interpretation of the velocity–azimuth display retrieval algorithm in terms of a first-order Fourier series. The obtained 6 DoF formulation is validated numerically by means of a floating LiDAR motion simulator and experimentally in nearshore and open-sea scenarios in the framework of the Pont del Petroli and IJmuiden campaigns, respectively. Both measurement campaigns involved a fixed and a floating 𝑍𝑒𝑝ℎ𝐼𝑅TM 300 LiDAR. The proposed formulation proved capable of estimating the motion-induced FDWL horizontal wind speed bias and returned similar percentiles when comparing the FDWL with the fixed LiDAR. The estimations of the turbulence intensity increment statistically matched the FDWL measurements under all motional and wind scenarios when clustering the data as a function of the buoy’s mean tilt amplitude, mean translational-velocity amplitude, and mean horizontal wind speed., This research project was part of the project PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First results on the systematic search of land surface temperature anomalies as earthquakes precursors

  • Boudriki Semlali, Badr-Eddine
  • Molina, Carlos
  • Park, Hyuk
  • Camps, Adriano
This article belongs to the Special Issue Intelligent Perception of Geo-Hazards from Earth Observations., Every year, earthquakes cause thousands of casualties and high economic losses. For example, in the time frame from 1998 to 2018, the total number of casualties due to earthquakes was larger than 846 thousand people, and the recorded economic losses were about USD 661 billion. At present, there are no earthquake precursors that can be used to trigger a warning. However, some studies have analyzed land surface temperature (LST) anomalies as a potential earthquake precursor. In this study, a large database of global LST data from the Geostationary Operational Environmental Satellite (GOES) and AQUA satellites during the whole year 2020 has been used to study the LST anomalies in the areas affected by earthquakes. A total of 1350 earthquakes with a magnitude larger than M4 were analyzed. Two methods widely used in the literature have been used to detect LST anomalies in the detrended LST time series: the interquartile (IQT) method and the standard deviation (STD). To the authors’ knowledge, it is the first time that the confusion matrix (CM), the receiver operating characteristic curve (ROC), and some other figures of merit (FoM) are used to assess and optimize the performance of the methods, and to select the optimum combination that could be used as a proxy for their occurrence. A positive anomaly was found a few days before the studied earthquakes, followed by the LST decrease after the event. Further studies over larger regions and more extended periods will be needed to consolidate these encouraging results., This work was sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”. Badr-Eddine Boudriki Semlali received support in the form of an FI grant: 2021 FI_B 00471 from Generalitat de Catalunya—FI AGAUR 2021., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GNSS-R observations of marine plastic litter in a water flume: An experimental study

  • Gonga, Amadeu
  • Pérez-Portero, Adrián
  • Camps, Adriano
  • Pascual, Daniel
  • Fockert, Anton de
  • Maagt, Peter de
This article belongs to the Special Issue Applications of GNSS Reflectometry for Earth Observation III., Currently, eight million metric tons of plastic end up in the oceans every year, and microplastics in different forms are present in almost all water systems in the world: streams, rivers, lakes, or oceans, and even in our blood. Detection of marine litter is an urgent task. Some works have recently reported the potential of GNSS-Reflectometry to detect marine plastic litter from space. This study presents the results of a controlled field experiment conducted under the auspices of ESA at the “Atlantic Basin” at the Deltares research institute (Delft, The Netherlands). Several types of wave conditions were created: sinusoidal and with JONSWAP spectrum, with different significant wave heights, and with different types of plastics and marine litter collected from the Dutch coast. Experimental results show the difficulty in detecting marine plastic litter based on a change of the reflected power. However, a statistical analysis of the GNSS-R estimated reflectivities (amplitude and phase) computed with very short integration times (coherent integration time Tcoh = 1 ms, and no incoherent averaging: Nincoh = 1) show that it may be possible to detect large accumulations of some types of marine litter that dampen the water waves, such as nets, bottles in a net, food wraps, and bags., This research was funded by ESA project GLobal MonItoring of MicroPlastics using GNSS-Reflectometry (GLIMPS) 4000132488/20/NL/GLC through a subcontract with Deimos Space UK Ltd “GLIMPS Subcontract DMU-UPC Ref. DMU-CP51 no. 2021-015; and project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the global relationship between polarimetric radio occultation differential phase shift and ice water content

  • Padullés, Ramon
  • Cardellach, Estel
  • Turk, F. Joseph
The Radio Occultations and Heavy Precipitation (ROHP) experiment aboard the Spanish PAZ satellite was deployed in 2018 with the objective of demonstrating the ability of the polarimetric radio occultation measurement (PRO) concept in detecting rain (liquid-phase precipitation). Analysis of these data has also demonstrated the ability of PRO to detect horizontally oriented frozen-phase precipitation. To verify these observations, a global climatological comparison is performed using the CloudSat (94 GHz) radar as a reference for different heights and taking into account the radio occultation (limb-based) viewing geometry. A robust relationship (e.g., high correlation coefficient) is found between the polarimetric radio occultation observable differential phase shift (ΔΦ) and the integrated ice water content (IWC) along the rays, globally, and for heights above freezing level. PAZ observations capture the major precipitation features and the signatures of the Intertropical Convergence Zone. The correlation coefficients maximize for tropical oceans, for a range of heights between 5 and 12 km. The ratios between ΔΦ and along-ray integrated IWC mean that climatologies are found to be within the range 0.03–0.09 mm kg−1 m2, although uncertainty due to the IWC retrieval algorithm must be noted. Further evaluation of the ratios with single-particle forward-scattering simulations indicate that the scattering by frozen hydrometeors with a combination of effective densities, axis ratios, and tilt angle distribution yield results that agree well with the observations. Overall, the global climatological results obtained in this study show the presence of horizontally oriented particles across the whole globe and for a wide range of height layers., This research has been supported by the Agència de Gestió d'Ajuts Universitaris i de Recerca (grant no. 2019 BP 00110), the H2020 Marie Skłodowska-Curie Actions (grant no. 801370), and the Agencia Estatal de Investigación (grant nos. RTI2018-099008-B-C22, PID2021-126436OB, and MCIN/AEI/10.13039/501100011033). This work has also been partially supported by the program Unidad de Excelencia María de Maeztu (grant no. CEX2020-001058-M)., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the retrieval of surface-layer parameters from lidar wind-profile measurements

  • Araújo da Silva, Marcos P.
  • Salcedo-Bosch, Andreu
  • Rocadenbosch, Francesc
  • Peña, Alfredo
This article belongs to the Section Atmospheric Remote Sensing., We revisit two recent methodologies based on Monin–Obukhov Similarity Theory (MOST), the 2D method and Hybrid-Wind (HW), which are aimed at estimation of the Obukhov length, friction velocity and kinematic heat flux within the surface layer. Both methods use wind-speed profile measurements only and their comparative performance requires assessment. Synthetic and observational data are used for their quantitative assessment. We also present a procedure to generate synthetic noise-corrupted wind profiles based on estimation of the probability density functions for MOST-related variables (e.g., friction velocity) and the statistics of the noise-corrupting perturbational amplitude found during an 82-day IJmuiden observational campaign. In the observational part of the study, 2D and HW parameter retrievals from floating Doppler wind lidar measurements are compared against those from a reference mast. Overall, the 2D algorithm outperformed the HW in the estimation of all the three parameters above. For instance, when assessing the friction-velocity retrieval performance with reference to sonic anemometers, determination coefficients of 𝜌22𝐷=0.77 and 𝜌2𝐻𝑊=0.33 were found under unstable atmospheric stability conditions, and 𝜌22𝐷=0.81 and 𝜌2𝐻𝑊=0.07 under stable conditions, which suggests the 2D algorithm as a prominent method for estimating the above-mentioned surface-layer parameters., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

RFI Mitigation in microwave radiometry using the Karhunen-Loève transform

  • Díez-García, Raúl
  • Camps, Adriano
  • Park, Hyuk
This study presents a new signal-processing method to mitigate radio-frequency interference (RFI), based on the Karhunen–Loève transform (KLT). The main property of this method is that it is adaptive and RFI-agnostic, that is, it can potentially mitigate any type of RFI waveform. It is based on the estimation of the covariance matrix of the process, and the derivation of a basis that spans the RFI subspace. The methodology to find this basis is explained in detail. The theoretical performance obtained using KLT is explored by simulations, along with the evaluation of the influence of the system parameters. In addition, a couple of examples with real data are provided., This work was supported in part by the Project "GNSS Environmental and Societal Missions (GENESIS)-Subproject Universitat Politécnica de Catalunya (UPC)" under Grant PID2021 -1264360B-C21, in part by the Spanish Ministerio de Ciencia e Innovación under Grdnt MCIN/AEI/10. 13039/50110001 1033, and in part by the European Union ''European Regional Development Fund (ERDF).'', Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The 2021 la Palma volcanic eruption and its impact on ionospheric scintillation as measured from GNSS reference stations, GNSS-R and GNSS-RO

  • Molina, Carlos
  • Boudriki Semlali, Badr-Eddine
  • González-Casado, Guillermo
  • Park, Hyuk
  • Camps, Adriano
Ionospheric disturbances induced by seismic activity have been studied in recent years by many authors, showing an impact both before and after the occurrence of earthquakes. In this study, the ionospheric scintillation produced by the 2021 La Palma volcano eruption is analyzed. The Cumbre Vieja volcano was active from 19 September to 13 December 2021, and many earthquakes of magnitude 3–4 were recorded, with some of them reaching magnitude 5. Three methods, GNSS reference monitoring, GNSS reflectometry (GNSS-R) from NASA CYGNSS, and GNSS radio occultation (GNSS-RO) from COSMIC and Spire constellations, are used to compare and evaluate their sensitivity as proxies of earthquakes associated with the volcanic eruption. To compare the seismic activity with ionospheric scintillation, seismic energy release, and 95th percentile of the intensity scintillation parameter (S4), measurements have been computed at 6 h intervals for the whole duration of the volcanic eruption. GNSS-RO has shown the best correlation between earthquake energy and S4, with values up to 0.09 when the perturbations occur around 18 h after the seismic activity. GNSS reference monitoring station data also show some correlation 18 h and 7–8 d after. As expected, GNSS-R is the one that shows the smallest correlation, as the ionospheric signatures get masked by the signature of the surface where the reflection is taking place. Additionally, the three methods show a smaller correlation during the week before earthquakes. Given the small magnitude of the seismic activity, the correlation is barely detectable in this situation, and thus would be difficult to use in any application to find earthquake proxies., This research was supported in part by grant PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund (ESF). GNSS-RO Spire data have been provided by the European Space Agency through the ESA TPM SPIRE project ID 67176., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the polarimetric radio occultation technique using NEXRAD weather radars

  • Paz, Antía
  • Padullés, Ramon
  • Cardellach, Estel
Currently, it remains a challenge to effectively monitor areas experiencing intense precipitation and the associated atmospheric conditions on a global scale. This challenge arises due to the limitations on both active and passive remote sensing methods. Apart from the lack of observations in remote areas, the quality of some observations deteriorates when heavy precipitation is present, making it difficult to obtain highly accurate measurements of the thermodynamic parameters driving these weather events. However, there is a promising solution in the form of the Global Navigation Satellite System (GNSS) Polarimetric Radio Occultation (PRO) technique. This approach provides a way to assess the large-scale bulk-hydrometeor characteristics of regions with heavy precipitation and the meteorological conditions associated with them. PRO offers vertical profiles of atmospheric variables, including temperature, pressure, water vapor pressure, and information about hydrometeors, all in a single fine-vertical resolution observation. To continue validating the PRO technique, we make use of polarimetric weather data from Next Generation Weather Radars (NEXRAD), focusing on comparing specific differential phase shift (𝐾𝑑𝑝) structures to PRO observable differential phase shift (ΔΦ). We have seen that PAZ and NEXRAD exhibit a good agreement on the vertical structure of the observable ΔΦ and that their combination could be useful for enhancing our understanding of the microphysics underlying heavy precipitation events., The ROHP-PAZ project is part of the Grant PID2021-126436OB-C22 funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” of the “European Union”. R.P is funded by the grant RYC2021-033309-I, included in the «NextGenerationEU»/PRTR. This work was also partially supported by the program Unidad de Excelencia María de Maeztu CEX2020-001058-M., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the correlation between earthquakes and prior ionospheric scintillations over the ocean: a study using GNSS-R data between 2017 and 2021

  • Boudriki Semlali, Badr-Eddine
  • Molina, Carlos
  • Park, Hyuk
  • Camps, Adriano
From 1980 to 2021, earthquakes have caused more than 846 000 casualties and about US$ 661 billion in economic losses. At present, there are no reliable earthquake precursors to generate alerts. Currently, the link between earthquakes and total electron content variations measured by global navigation satellite systems (GNSSs) monitoring ground stations has been studied. However, GNSS ground-based monitoring stations are irregularly disseminated around the globe with significant gaps, particularly in the ocean's regions. In this article, we analyze ionospheric intensity scintillation anomalies as potential proxies of earthquakes. NASA CYGNSS GNSS-R (reflectometry) acquired by CYGNSS/delay Doppler mapping instrument from 2017 to 2021 has been used to calculate and analyze the anomalies in the S 4 parameter over ocean areas affected by earthquakes. More than 30 000 ocean earthquakes within ±40° in latitude and with a magnitude larger than M4 have been examined. The daily planetary geomagnetic index Kp was used to discard data that may be disturbed due to space weather conditions. In addition, a daily sea wind speed mask was used to eliminate sea states that impact the signal reflectivity. The standard deviation and the interquartile time series methods have been used to detect these S 4 anomalies. The confusion matrix, the receiver operating curve, and some other figures of merit have been used for the first time to evaluate and improve the performance of the prediction parameters and identify the optimum configuration to be used as a potential proxy of earthquake occurrence. As a result, a small, but detectable positive S 4 anomaly was detected between 1 and 7 days before the earthquakes under study., The work of Badr-Eddine Boudriki Semlali was supported by an FI Grant: 2021 FI_B 00471 from FI AGAUR 2021. This work was supported in part by the Grant GENESIS, PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund, Grant RYC-2016-2018 financed by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coherent combination of GPS III L1 C/A and L1C signals for GNSS reflectometry

  • Du, Hao
  • Nan, Yang
  • Li, Weiqiang
  • Cardellach, Estel
  • Ribó, Serni
  • Rius, Antonio
With the evolution of global navigation satellite systems (GNSSs), more GNSS satellites and civilian signals are available for GNSS reflectometry (GNSS-R). Developments of new onboard processing strategies can improve the observation performance of spaceborne GNSS-R. To this end, this article proposes a new processing method by coherently combining reflected global positioning system (GPS) III level 1 (L1) C/A and L1C signals. By exploiting the additional signal component, the signal-to-noise ratio (SNR) of the reflected signal can be significantly improved. Moreover, by taking advantage of the narrower autocorrelation function of the combined signal, the spatial resolution and the performance of geophysical applications can be significantly improved. The proposed method has been validated by processing cyclone GNSS (CYGNSS) raw intermediate frequency data, including the direct and reflected signals from GPS III satellites. The results indicate that the SNR of the combined reflected waveform can be improved by ~2 dB compared to the L1 C/A waveform. Moreover, the SNR of the combined signal can be improved more efficiently using a longer coherent integration interval compared to the L1 C/A signal. Preliminary altimetric results demonstrate a 35.3%–61.6% improvement in the ranging standard deviation and a 22.4%–64.4% improvement in the median absolute deviation compared to L1 C/A measurements. In addition, the correlation coefficient between combined measurements and wind speed improves by 26.3% on average compared to L1 C/A measurements and 45.7% for high winds. This article presents a novel GNSS-R onboard signal processing method with improved performance, which can provide a reference for the design of future GNSS-R instruments., This work was supported in part by MCIN/AEI/10.13039/501100011033 with contributions from the “European Union Next Generation EU/PRTR” under Grant RYC2019-027000-I, Grant PID2021-126436OB-C22, and Grant CEX2020-001058-M; in part by the Spanish National Research Council under Grant 20215AT007; and in part by the National Natural Science Foundation of China under Grant 42304017. This work of Hao Du was supported in part by the China Scholarship Council (CSC) through a State Scholarship Fund under Grant 202206270011. (Corresponding author: Weiqiang Li.), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analyzing GNSS-RO derived ionospheric intensity scintillation preceding earthquakes in the Coral Sea during 2022

  • Carvajal-Librado, Mireia
  • Molina, Carlos
  • Boudriki Semlali, Badr-Eddine
  • Park, Hyuk
  • Camps, Adriano
Lithosphere–atmosphere–ionosphere coupling models have been widely studied as potential earthquake precursors. After the earthquakes, total electron content (TEC) anomalies propagating away from the epicenter have been identified. Recent evidence has also found that electromagnetic phenomena related to earthquakes might also produce ionospheric anomalies before their occurrence. This study analyzes the correlation between ionospheric intensity scintillation, characterized by the S4 index, and seismic activity in the area around the Coral Sea in the year 2022. The S4 intensity scintillation index derived from COSMIC-2 global navigation satellite system radio occultation estimates ionospheric perturbations and identifies anomalies. The methodology involves applying rigorous filters to ensure reliable S4 estimation, including slant TEC thresholding and night-time filtering. To compare the S4 scintillation index with seismic activity, the mean and the 95th percentile of the S4 values are computed at 1-d intervals. Two case studies of earthquakes in 2022 with magnitudes larger than 6 are presented, as well as a statistical analysis based on the calculation of the confusion matrices, and the receiver operating characteristic curves. A positive correlation between the ionospheric intensity scintillation and the occurrence of earthquakes is found, with a probability of detection exceeding 35.7 % and a false alarm rate of 7.1 %., The work of B.-E. Boudriki-Semlali was supported by an FI Grant: 2021 FI_B 00471 from FIAGAUR 2021. This work was supported in part by project “GENESIS: GNSS Environmental and Societal Missions- Subproject UPC” under Grant PID2021-126436OB-C21 sponsored by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación(AEI)/10.13039/501100011033 and in part by EU FEDER “Una manera de hacer Europa”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep residual fully connected network for GNSS-R wind speed retrieval and its interpretation

  • Du, Hao
  • Li, Weiqiang
  • Cardellach, Estel
  • Ribó, Serni
  • Rius, Antonio
  • Nan, Yang
Global navigation satellite system reflectometry (GNSS-R) has emerged as a new technique to provide L-band bistatic measurements for ocean wind speed retrieval, in which traditional geophysical model functions (GMFs) or shallow neural networks (NNs) are normally used. However, it is still challenging to identify and consider all relevant parameters in the GMF. Meanwhile, NN models face limitations due to the degradation problem, which restricts their depth and consequently their performance. Furthermore, the interpretation of NN models for GNSS-R wind retrieval is another issue. To this end, we propose a residual fully connected network (RFCN) fusing auxiliary information such as geometry, receiver gain, significant wave height, and current speed with track-wise corrected 𝜎0. Referred to the European Centre for Medium-Range Weather Forecast (ECMWF) ERA5 wind product, the root mean square error (RMSE) and bias of RFCN winds are 1.031 m/s and -0.0003 m/s, respectively, with a 6% improvement in RMSE compared to debiased NOAA Cyclone Global Navigation Satellite System (CYGNSS) Version 1.2 (V1.2) wind speed retrieval. Moreover, in an intertropical convergence zone (ITCZ) area with large current speeds, the RMSE and bias are 1.006 m/s and -0.022 m/s: an improvement of 11.6% and 87.9% compared to debiased NOAA CYGNSS V1.2 winds. The bias ‘strips’ in these areas are nearly eliminated. Daily averaged error analyses also demonstrate that RFCN winds are more robust and consistent with ECMWF winds. For wind speeds larger than 20 m/s, referred to Soil Moisture Active Passive (SMAP) Level 3 final wind products, the RMSE and bias of fine-tuning RFCN (FT_RFCN) winds are reduced by 25.7% and 91.5% compared to NOAA winds. Finally, the RMSE and bias of retrievals in tropical cyclones, measured by Stepped Frequency Microwave Radiometer (SFMR) during 2021-2022, reveal an improvement of 3.5% and 21.2% compared to NOAA winds. Through SHapley Additive exPlanations (SHAP) models developed for RFCN and FT_RFCN, the contribution of each feature is quantitatively evaluated, while providing insights into their interactions within the ‘black-box’ NN models with clear physical meanings., This work is partially supported by Grants RYC2019-027000-I, PID2021-126436OB-C22, and the Spanish program Unidad de Excelencia María de Maeztu CEX2020-001058-M, all funded by MCIN/AEI/10.13039/501100011033 with contributions by “European Union Next Generation EU/ PRTR”, and is also supported by Grant 20215AT007 funded by Spanish National Research Council. This work of Hao Du is supported in part by the China Scholarship Council (CSC) through a State Scholarship Fund (No. 202206270011). This work is also supported by the National Natural Science Foundation of China under Grant 42304017. T, With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preliminary design of satellite systems through the integration of model-based system engineering and agile methodologies: Application to the 3ColStar mission

  • Buitrago-Leiva, Jeimmy Nataly
  • Camps, Adriano
This article belongs to the Special Issue Space Systems Preliminary Design., Jeimmy Nataly Buitrago-Leiva et al., This paper presents a case study on integrating Agile Systems Engineering methodologies in the preliminary design phase of satellite systems, focusing on the 3ColStar satellite mission. Through Model-Based Systems Engineering (MBSE), technical consistency was rigorously managed across various architectural documents, ensuring coherency and minimizing errors. Furthermore, the preliminary design was developed, with the implementation of the Arcadia Method, supported by the Capella modeling tool. This allowed the digitalization of the system, which was represented by models that contain requirements, architecture, and interfaces between the different parts of the system. At the same time, the preliminary design process was streamlined and completed within an accelerated time frame of 4 months, with weekly sprints driving progress based on the scrum methodology. This case study highlights the effectiveness of Agile Systems Engineering principles to improve the team communication accuracy, communication, and efficiency of satellite systems preliminary design, providing valuable insights for future missions., This work was sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21; MCIN/AEI/10.13039/501100011033/; EU ERDF “A way to do Europe”; and the research and public 2024 grant from Universidad de los Andes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The 3Cat-4 spacecraft thermal analysis and thermal vacuum test campaign results

  • Buitrago-Leiva, Jeimmy Nataly
  • Terraza-Palanca, Ines
  • Contreras-Benito, Luis
  • Fernández, Lara P.
  • Gracia-Sola, Guillem
  • Castillo Sancho, Cristina del
  • Ha, Lily
  • Palma, David
  • Solyga, Malgorzata
  • Camps, Adriano
This article belongs to the Special Issue Small Satellite Missions., 3Cat-4 is the fourth member of the CubeSat series of UPC’s NanoSat Lab, and it was selected by the ESA Academy’s Fly Your Satellite! program in 2017. This mission aims at demonstrating the capabilities of nano-satellites, and in particular those based in the 1-Unit CubeSat standard, for challenging Earth Observation (EO) using Global Navigation Satellite System-Reflectometry (GNSS-R) and L-band microwave radiometry, as well as for Automatic Identification Systems (AIS). The following study presents the results of the thermal analysis carried out for this mission, evaluating different scenarios, including the most critical cases at both high and low temperatures. The results consider different albedos and orbital parameters in order to establish the optimal temperatures to achieve the best mission performance within the nominal temperatures, and in all operational modes of the satellite. Simulation results are included considering the thermal performance of other materials, such as Kapton, as well as the redesign of the optical properties of the satellite’s solar panels. The correlation with the thermal model and the TVAC test campaign was conducted at the ESA ESEC-GALAXIA facilities in Belgium., This research was funded by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/5011000 11033/ and EU ERDF “A way to do Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3Cat-8 Mission: A 6-Unit CubeSat for Ionospheric Multisensing and Technology Demonstration Test-Bed

  • Contreras-Benito, Luis
  • Osipova, Ksenia
  • Gracia-Sola, Guillem
  • Coppa, Francesco
  • Climent-Salazar, Pau
  • Sopena-Coello, Paula
  • Garcín, Diego
  • Ramos-Castro, Juan
  • Camps, Adriano
This article belongs to the Special Issue Advances in CubeSats for Earth Observation, This paper presents the mission analysis of 3Cat-8, a 6-Unit CubeSat mission being developed by the UPC NanoSat Lab for ionospheric research. The primary objective of the mission is to monitor the ionospheric scintillation of the aurora, and to perform several technological demonstrations. The satellite incorporates several novel systems, including a deployable Fresnel Zone Plate Antenna (FZPA), an integrated PocketQube deployer, a dual-receiver GNSS board for radio occultation and reflectometry experiments, and a polarimetric multi-spectral imager for auroral emission observations. The mission design, the suite of payloads, and the concept of operations are described in detail. This paper discusses the current development status of 3Cat-8, with several subsystems already developed and others in the final design phase. It is expected that the data gathered by 3Cat-8 will contribute to a better understanding of ionospheric effects on radio wave propagation and demonstrate the feasibility of compact remote sensors in a CubeSat platform., L.C.-B., K.O. and G.G.-S. were supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477, 2023 FI-1 00239, 2024 FI-1 00152) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This project was also sponsored in part by the project “GENESIS: GNSS Environmental and Societal Missions–Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/and EU ERDF “A way to do Europe”, and by UPC internal funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A fast and efficient method to estimate inland water levels using CYGNSS L1 data and DTMs: Application to Floods, lakes and reservoirs monitoring

  • Ma, Zhongmin
  • Zhang, Shuangcheng
  • Camps, Adriano
  • Park, Hyuk
  • Liu, Qi
  • Tan, Pengyuan
  • Wang, Changyang
Numerous studies have demonstrated the effectiveness of CYGNSS (Cyclone Global Navigation Satellite System) data to detect inland water bodies. However, most of them focus on the detection of surface water extent, rather than the water levels and depths. Most of the existing studies on inland water level altimetry using CYGNSS data are based on the CYGNSS raw IF (raw Intermediate Frequency) data, and use either the time-delay or the phase methods. Although high accuracy can be obtained, raw IF data are currently not a CYGNSS standard data product, and thus it cannot be applied to emergency detection of sudden flood events, or long time-series monitoring of a single large inland water body. Based on these research gaps, this study presents an effective method to estimate the water levels and depths (on a 3 km grid) by combining CYGNSS L1 standard data with DTM (Digital Terrain Model) information. We compared the CYGNSS retrieved water levels with other water level reference data for eight case studies with different characteristics (3 floods, 3 lakes, and 2 reservoirs). The spaceborne LiDAR ICESat-2 and GEDI are used for the flood case studies, and water levels from DAHITI and Hydroweb databases are used for long-term changes of the lakes and reservoirs. All comparative validations yield encouraging results. For flood cases, comparison with ICESat-2 and GEDI showed strong correlation (mean R values for the three case studies were 0.98). The mean bias of CYGNSS retrieved water levels was - 0.26 m, and the mean RMSE was 1.34 m. For lakes and reservoirs, the comparison to DAHITI and Hydroweb showed a mean correlation value of 0.62 (R), while the mean bias and RMSE were - 0.63 m, and 2.61 m, respectively. Finally, the sources of uncertainty are discussed, including the effect of topography discretization, and the effect of uncertainty in the determination of surface water boundaries. This study demonstrates the feasibility of combining CYGNSS L1 standard data with DTM data to measure inland water levels, highlighting its suitability to monitor both flash floods and long-term changes of lake and reservoir water levels. This rapidly updatable water level information will contribute to further comparisons and hydrological researches., This research was funded by the National Natural Science Foundation of China Projects (Grant No.42074041); The National Key Research and Development Program of China (Grant No.2020YFC1512000);Shaanxi Province Science and Technology Innovation Team (Ref. 2021TD-51); The innovation team of ShaanXi Provincial Tri-Qin Scholars with Geoscience Big Data and Geohazard Prevention (2022) and the Fundamental Research Funds for the Central Universities (CHD300102263715). This research has also been partially funded by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC”, Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER “Una manera de hacer Europa”. Zhongmin Ma's work was partly supported by the China Scholarship Council (CSC) through a State Scholarship Fund (No. 202306560073). We thank all the reviewers for their helpful and detailed suggestions, to help us improve the revised version of this manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Architecting CubeSat constellations for messaging service, Part I

  • Osipova, Ksenia
  • Camps, Adriano
  • Golkar, Alessandro
  • Ruíz-de-Azúa, Joan Adrià
  • Fernández, Lara P.
  • Garzaniti, Nicola
© 2024 The Authors. Published by Elsevier Ltd on behalf of IAA., This is an open access article under the CC BY-NC-ND license, In today's modern and globalized world, connectivity is a key factor for businesses, production facilities, sensor networks, and ordinary people. However, there are still populated areas which are not covered by ground-based telecommunications infrastructure. This is where telecommunication satellite constellations come in, as they can provide coverage to remote and uninhabited regions and fill existing connectivity gaps to ensure data transfer. LoRa is one of the technologies designed for data transmissions over long distances with low power consumption. Alongside with other technologies of the Low-Power Wide Area Network family, it is widely used for Internet of Things applications. LoRa chirp spread spectrum modulation is robust against the Doppler frequency shifts encountered in low earth orbits, and it has already been used in IoT satellite communications. Due to the low transmitted signal power, the achieved data rate is not high, making it a suitable technology for telecommunications payloads on CubeSat platforms for messaging services. As compared to existing traditional communication satellite systems, CubeSat constellations are low-cost and may offer an affordable connectivity service to developing regions. This study is divided in two parts. In Part I the demand model is built based on the population distribution not covered by cell towers. The LoRa link performance is analyzed, considering the impact of LoRa channel parameters variation, such as spreading factor and channel bandwidth, while satellite orbital height, transmission antenna beamwidth, and transmitter peak power have a direct impact on the payload mass. Among thousands of possible configurations, 73 feasible payload designs have been downselected. In Part II of the study, the satellite mass and the total system cost are estimated based on the payload parameters obtained. Messages transmission simulation via a constellation is conducted in order to identify optimal constellation architectures for messaging service, as well as the main drivers of the system economic profitability. The presented analysis results provide a deeper understanding of LoRa connectivity advantages and limitations together with the performance drivers, which will support the optimization of future LoRa-based satellite communication systems and other IoT satellite constellations., This has been supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund . This project was also sponsored in part by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/ 501100011033/ and EU ERDF “A way to do Europe”. This study would also not have been possible without the support of the Skolkovo Institute of Science and Technology, whose funding enabled the international collaboration through its Academic Mobility program. During the preparation of this work the authors used ChatGPT [75] in order to improve language and readability. After using this tool, the authors reviewed and edited the content as needed, and take full responsibility for the content of the publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing the detection of floating plastic litter with advanced remote sensing technologies in a hydrodynamic test facility

  • Fockert, Anton de
  • Eleveld, M. A.
  • Bakker, W.
  • Felício, J. M.
  • Costa, T. S.
  • Vala, M.
  • Marques, P.
  • Leonor, N.
  • Moreira, A.
  • Costa, J. R.
  • Caldeirinha, R. F. S.
  • Matos, S A
  • Fernandes, C. A.
  • Fonseca, N.
  • Simpson, M. D.
  • Marino, Alessio
  • Gandini, E.
  • Camps, Adriano
  • Pérez-Portero, Adrián
  • Gonga, Amadeu
  • Burggraaff, O.
  • Garaba, S. P.
  • Salama, M. S.
  • Xiao, Qingmei
  • Calvert, R.
  • van den Bremer, T. S.
  • Maagt, Peter de
This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, © The Author(s) 2024, Remote sensing technologies have the potential to support monitoring of floating plastic litter in aquatic environments. An experimental campaign was carried out in a large-scale hydrodynamic test facility to explore the detectability of floating plastics in ocean waves, comparing and contrasting different microwave and optical remote sensing technologies. The extensive experiments revealed that detection of plastics was feasible with microwave measurement techniques using X and Ku-bands with VV polarization at a plastic threshold concentration of 1 item/m2 or 1-10 g/m2. The optical measurements further revealed that spectral and polarization properties in the visible and infrared spectrum had diagnostic information unique to the floating plastics. This assessment presents a crucial step towards enabling the detection of aquatic plastics using advanced remote sensing technologies. We demonstrate that remote sensing has the potential for global targeting of plastic litter hotspots, which is needed for supporting effective clean-up efforts and scientific evidence-based policy making., This work has been performed as part of the OSIP and Discovery programmes of the European Space Agency (ESA). We thank P. Corradi, the Technical Officer and Coordinator of the ESA Discovery Campaign on Remote Sensing of Plastic Marine Litter for this cooperation during this project. Multiple authors were funded by these programmes from different grants. UPC activities were also partially sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”. The authors are grateful for assistance by the Deltares EFS support team for guidance during the measurement campaign and for H. Volten of RIVM for the use of GroundSPEX., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of a Dynamically Re-Configurable Radio-Frequency Interference Detection System for L-Band Microwave Radiometers

  • Pérez-Portero, Adrián
  • Querol, Jorge
  • Mas-Vinolas, Andreu
  • Amezaga, Adria
  • Jove-Casulleras, Roger
  • Camps, Adriano
This article belongs to the Special Issue Techniques and Instrumentation for Microwave Sensing, Real-Time RFI Detection and Flagging (RT-RDF) for microwave radiometers is a versatile new FPGA algorithm designed to detect and flag Radio-Frequency Interference (RFI) in microwave radiometers. This block utilizes computationally-efficient techniques to identify and analyze RF signals, allowing the system to take appropriate measures to mitigate interference and maintain reliable performance. With L-Band microwave radiometry as the main application, this RFI detection algorithm focuses on the Kurtogram and Spectrogram to detect non-Gaussian behavior. To gain further modularity, an FFT-based filter bank is used to divide the receiver's bandwidth into several sub-bands within the band of interest of the instrument, depending on the application. Multiple blanking strategies can then be applied in each band using the provided detection flags. The algorithm can be re-configured in the field, for example with dynamic integration times to support operation in different environments, or configurable thresholds to account for variable RFI environments. A validation and testing campaign has been performed on multiple scenarios with the ARIEL commercial microwave radiometer, and the results confirm the excellent performance of the system., This research was funded by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC (PID2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and Adrian Perez-Portero (FISDUR2020/105) was supported by a grant for recruitment of early-stage research staff of the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR)—Generalitat de Catalunya, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modern Ionospheric Ray Tracer for Earth Observation Satellite Missions

  • Molina, Carlos
  • Fernández-Niño, Elena
  • Camps, Adriano
Electromagnetic waves propagation through the ionosphere is subject to several effects including refraction, absorption, signal delay, or Faraday rotation. A ray tracer propagator that simulates these effects is an important tool for all satellite missions relying on transionospheric communications and Earth observation. This study presents an update to the 1975 Jones and Stephenson IONORT's code by implementing the use of up-to-date ionospheric, atmospheric, and geomagnetic models (International Reference Ionosphere or NeQuick, NRLMSISE-00, and International Geomagnetic Reference Field), and a new 3-D model for equatorial plasma bubbles. The developed code is part of the Ionosphere Modular Software Package in the context of the European Space Agency project SIMIONO. High-frequency radar sounders, synthetic aperture radars, and GNSS reflectometry missions constitute the main application of this software. The ray tracer has been validated with respect to the original software and by comparing real versus simulated vertical ionograms in different locations and dates., This work was supported in part by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC under Grant PID2021-126436OB-C21 sponsored by MCIN/AEI/10.13039/501100011033/ and in part by EU ERDF “A way to do Europe.", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resource-Efficient FPGA Architecture for Real-Time RFI Mitigation in Interferometric Radiometers

  • Pérez-Portero, Adrián
  • Querol, Jorge
  • Camps, Adriano
Interferometric radiometers operating at L-band, such as ESA's SMOS mission, enable crucial Earth observations providing high-resolution measurements of soil moisture, ocean salinity, and other geophysical parameters. However, the increasing electromagnetic spectrum utilization has led to significant Radio Frequency Interference (RFI) challenges, particularly critical given the sensors' fine temperature resolution requirements of less than 1 K. This work presents the hardware implementation of an advanced RFI detection and mitigation algorithm specifically designed for interferometric radiometers, targeting future L-band missions. The implementation processes 1-bit quantized signals at 57.69375 MHz from multiple receivers, employing time-frequency analysis and polarimetric detection techniques while optimizing Field Programmable Gate Array (FPGA) resource utilization. Novel optimization strategies include overclocked processing cores operating at 230.775 MHz, efficient resource sharing through operation serialization, and strategic memory management. The system achieves real-time processing capabilities while maintaining detection probabilities above 63% with false alarm rates below 1% for typical interference scenarios. Performance validation using synthetic datasets demonstrates robust operation across various RFI conditions, making this implementation suitable as part of the RFI detection and mitigation efforts for future interferometric radiometer missions beyond SMOS., This research was funded by ESA, grant number ITT AO9359, by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and grant for recruitment of early stage research staff of Agència Gestió d’Ajuts Universitaris i de Recerca (AGAUR) Generalitat de Catalunya, Spain (FISDUR2020/105)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

RF-Assisted Uncertainty Cone Reduction in Free-Space Optical Inter-Satellite Links

  • Fernández-Niño, Elena
  • Fraire, Juan A.
  • Camps, Adriano
  • Ruíz-de-Azúa, Joan Adrià
One of the space communications industry's current focuses is developing high-throughput communication terminals for satellite-to-satellite communication links. Optical inter-satellite links provide high data rates, long-range, and robustness against interferences, and they do not require frequency licensing as radiofrequency communication systems. Nevertheless, as the uncertain location of the receiver is comprised in an area larger than that illuminated by the transmitting laser, the pointing accuracy is a critical element in the success of the optical link establishment and maintenance, requiring a pointing, acquisition, and tracking mechanism. The acquisition process is the most time-consuming of the pointing processes, limiting the time available to send data, especially in highly dynamic networks. This paper focuses on reducing the acquisition time by reducing the initial satellite position uncertainty. To this end, a hybrid system that combines RF and optical technologies in a single communication module is proposed. Whereas the control plane is managed via the RF link to exchange more precise global navigation data, the optical link corresponds to the data plane in which payload data is exchanged. The pointing between two satellites is simulated to analyze its behavior, considering the error of cumulative orbital propagation data and global navigation satellite system data. This work also analyzes the cumulative error produced by the propagation of the TLEs over time. Finally, the results show how a system that relies on the exchange of global navigation satellite system positioning data achieves up to 99.45% better-pointing accuracy than a system that bases positioning data on TLE propagation., This work was supported in part by the by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union—NextGeneration EU, in the Framework of the Recovery Plan, Transformation and Resilience (PRTR, Call UNICO I+D 5G 2021) under Grant TSI-063000-2021-5-6GSatNet-SS; in part by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia; in part by the European Union’s Horizon Europe under Grant 101096526 (ETHER); and in part by the Ministry of Science and Innovation MICIN/Agencia Estatal de Investigación AEI/10.13039/501100811033 and EU Feder through the Project “GENESIS: GNSS Environmental and Societal Missions” under Grant PID 2021-1264360B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Signal Coherence and Water Detection Algorithms for the ESA HydroGNSS Mission

  • Peng, Jilun
  • Li, Weiqiang
  • Cardellach, Estel
  • Marigold, Gabrielle
  • Clarizia, Maria Paola
The algorithms to detect the presence of water on land surfaces using the Global Navigation Satellite System (GNSS) reflected signals collected aboard of the future ESA Scout 2-satellite mission HydroGNSS are presented. HydroGNSS will be ready for launch in H2/2024, into polar orbits, and it will operate at dual frequency, dual-polarization, and in two simultaneous acquisition modes (low-rate power and high-rate complex signal modes). The overall strategy to generate level-2, point-by-point along track water classification using all these signals is introduced, yet currently available datasets only permit the validation of the algorithms applied to one single frequency and polarization. Two signal coherence indicators are selected per each acquisition mode, and together with geolocation, large-scale surface roughness, and land cover type are the inputs of the random forest classifier, which is an ensemble learning method, with the monthly Global Surface Water (GSW) as a reference target. The algorithms are tested with NASA/CYGNSS low-rate power delay-Doppler maps (DDMs) and with CYGNSS and U.K./TechDemoSat-1 (TDS-1) raw intermediate frequency (IF) sampled signals. The results of the validation are analyzed at different scales, with results achieving the mission's 90% accuracy requirement. Final retraining and validation using actual dual-polarization and dual-frequency HydroGNSS data will be conducted once the satellites are in-orbit., This work was supported in part by the European Space Agency (ESA) through the HydroGNSS Scout Mission under Grant 4000135686/21/NL/AD and in part by MCIN/AEI/10.13039/501100011033 with contributions by the “European Union Next Generation EU/PRTR” under Grant PID2021-126436OBC22, Grant CEX2020-001058-M, and Grant RYC2019-027000-I–the latter supporting Dr. Weiqiang Li. The work of Jilun Peng was supported by the China Scholarship Council under Grant 202106560003., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Statistical Analysis of LEO and GEO Satellite Anomalies and Space Radiation

  • Buitrago-Leiva, Jeimmy Nataly
  • Ramouz, Mohamed El Khayati
  • Camps, Adriano
  • Ruíz-de-Azúa, Joan Adrià
Exposure to space radiation substantially degrades satellite systems, provoking severe partial or, in some extreme cases, total failures. Electrostatic discharges (ESD), single event latch-up (SEL), and single event upsets (SEU) are among the most frequent causes of those reported satellite anomalies. The impact of space radiation dose on satellite equipment has been studied in-depth. This study conducts a statistical analysis to explore the relationships between low-Earth orbit (LEO) and geostationary orbit (GEO) satellite anomalies and particle concentrations, solar and geomagnetic activity in the period 2010–2022. Through a monthly and daily timescale analysis, the present work explores the temporal response of space disturbances on satellite systems and the periods when satellites are vulnerable to those disturbances., This work was sponsored by project “GENESIS: GSSN Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Considerations for Eco-LeanSat Satellite Manufacturing and Recycling

  • Buitrago-Leiva, Jeimmy Nataly
  • Camps, Adriano
  • Moncada Niño, Alvaro Fernando
This research aims to contribute to the development of the Eco-LeanSat concept by focusing on a sustainable approach to satellite manufacturing and the repurposing of remaining satellite capabilities after failure. Despite satellites no longer being suitable for their original purposes, these remaining capabilities can find new applications. The study begins by identifying relevant innovative eco-design applications. Subsequently, it examines sustainability within the satellite lifecycle supply chain, categorizing it into four methods: (1) active debris removal, (2) transport logistics, (3) mission extension, and (4) repair and construction. Aligned with emerging trends in space activities, the study also considers future developments to maximize satellites’ potential to provide new services. Additionally, the research includes a description of a potential lean manufacturing process that encompasses logistic chains to support the development of a more sustainable space economy. Finally, the study concludes with a technological survey tracing the evolution of the development of the SmallSat and CubeSat platforms that identifies relevant innovative designs for a sustainable space environment., This research was sponsored in part by the I+D+i project of UPC GENESIS project PID 2021-1264360B-C21, financed by MCIN/AEI and EU/EDRF “Another way to make Europe”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Architecting CubeSat constellations for messaging service, Part II

  • Osipova, Ksenia
  • Golkar, Alessandro
  • Camps, Adriano
  • Ruíz-de-Azúa, Joan Adrià
  • Contreras-Benito, Luis
  • Garzaniti, Nicola
  • Fernández, Lara P.
Data collection and exchange stand as a cornerstone technology driving the advancement of technological development over recent decades. However, many remote and hard-to-reach regions remain devoid of terrestrial communication infrastructure. Telecommunication satellites offer a comprehensive solution, facilitating data transfer to even the most remote areas and bridging existing connectivity gaps. Currently, there are two distinct types of systems under development by private companies aiming to enable direct-to-handset connectivity. The first type strives to offer mobile connectivity based on 3GPP standards with unmodified smartphones but these satellites are expensive and heavy. The second type of satellites provides low data rates connectivity using Internet of Things technologies to send and receive data packets. These satellites, in contrast, are more lightweight, low-cost, and can take the form of CubeSats or even PocketQubes. This study proposes a fusion of the advantages of both systems, contemplating a constellation for messaging services employing low-power user devices and LoRa technology. In Part I of the study the LoRa channel capability was analyzed to enable the transmission of at least 1 message per day in the area with the highest concentration of users, uncovered by terrestrial cell towers and downselected 73 different LoRa connectivity payloads. Part II concentrates on various aspects of constellation design, encompassing the sizing of the CubeSat platform, messages transmission simulation approach, and constellation launch strategies. Employing a trade-space exploration approach, the study identified a preferred Low Earth Orbit (LEO) constellation architecture out of a pool of 11 826, capable of satisfying 51% of the demand and yielding the highest revenue among all the considered constellations. The performance analysis revealed that coverage and spreading factor are the paramount factors in serving users. The architectural analysis framework presented here can serve as a valuable tool for the preliminary design and sizing of a constellation for different services based on short data packets transmission, while the gained insights regarding performance drives have the potential to enrich the development of future Internet of Things connectivity projects., This has been supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This project was also sponsored in part by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC”, Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/ 501100011033 and EU FEDER “Una manera de hacer Europa”. This study would also not have been possible without the support of the Skolkovo Institute of Science and Technology, whose funding enabled the international collaboration through its Academic Mobility program. During the preparation of this work the authors used ChatGPT [93] in order to improve language and readability. After using this tool, the authors reviewed and edited the content as needed, and take full responsibility for the content of the publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Novel Geometry Agnostic Delay and Doppler Tracking Technique for GNSS-Reflectometry: Application to the GNOS-II Payload Onboard the FY-3E

  • Wang, Changyang
  • Camps, Adriano
  • Hu, Xiuqing
  • Park, Hyuk
  • Yu, K.
  • Zhai, Xiaochun
  • Lu, Wenqiang
  • Huang, Feixiong
  • Liao, Mi
  • Zhang, Peng
  • Zheng, Nanshan
  • Zhang, Kefei
  • Ma, Zhongmin
Global Navigation Satellite System-Reflectometry (GNSS-R) uses GNSS signals as signals of opportunity as a multistatic radar. Most GNSS-R instruments conduct 1 ms coherent integration, followed by 500 or 1000 incoherent averages, leading to level-1 products [delay Doppler map (DDM)]. For remote sensing missions with higher spatio-temporal resolution requirements, raw data, and fewer incoherent averages are required for DDM computations. Fengyun-3E (FY-3E) GNSS Occultation Sounder II (GNOS-II) payload can acquire reflected signal's intermediate frequency (IF) raw data for specific areas, but there is no channel to record raw direct signals. Obtaining level-1 products DDM from raw data requires tracking the delay and Doppler frequency centroid coordinates, as they change during the incoherent integration time. Otherwise, the level-1 DDMs would appear blurring, which would result in wider DDMs and lower peaks. Besides, the geometry of transmitter-specular reflection point-receiver of GNOS-II is unobtainable, so classical algorithms cannot be used. Therefore, an innovative processing technique is presented, which can estimate the peak coordinates of all individual DDMs by appropriately grouping the individual DDMs and incoherently accumulating within each group. The feasibility of this method is demonstrated with representative data from sea, ice, and soil. Furthermore, incoherent averaging DDMs at a temporal resolution of 200 ms can well detect the boundary between sea, ice, and soil in high-latitude and complex environments while maintaining high quality. This work is an important basis for future analysis of the raw data from GNOS-II and will also inspire other work of individual DDM tracking where geometric information is agnostic., This work was supported in part by the National Natural Science Foundation of China under Grant 42174022, in part by the Fundamental Research Funds for the Central Universities under Grant 2023XSCX047, in part by the Postgraduate Research & Practice Innovation Program of Jiangsu Province under Grant KYCX23_2752, in part by the Graduate Innovation Program of China University of Mining and Technology under Grant 2023WLKXJ165, in part by China Scholarship Council program (Project ID: 202306420003), and in part by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC” under Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/ 501100011033 and EU EDRF “A way to make Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Right-Hand Polarized Signals in GNSS-R Water Detection Algorithms

  • Peng, Jilun
  • Cardellach, Estel
  • Li, Weiqiang
  • Ribó, Serni
  • Rius, Antonio
The water detection algorithm for the dual-polarized HydroGNSS mission was validated using spaceborne left-hand circular polarization (LHCP) data from the cyclone global navigation satellite system. With the public availability of dual-polarization data from Rongowai, an airborne global navigation satellite system-reflectometry mission, a unique opportunity arises to evaluate the contribution of right-hand circular polarization (RHCP) data to surface water detection. This analysis can offer a deeper understanding of RHCP data and yield predictive insights prior to the HydroGNSS launch. In this study, we initially analyzed coherence indicators in incoherently averaged dual-polarized signals, and subsequently, applied these indicators to a random forest classifier, similar to the HydroGNSS surface inundation algorithm. The findings have been compared with existing flooding products, showing promising results with over 91% agreement in water detection. The analysis revealed that, while the LHCP data exhibit a higher sensitivity to water, the incorporation of the RHCP data enhances the robustness and reliability of the classification. This reinforces the hypothesis that HydroGNSS, operating at dual polarization, might produce a more effective surface water detection product than single-polarization GNSS-R missions., This work was supported in part by the European Space Agency (ESA) through the HydroGNSS Scout Mission under Grant 4000135686/21/NL/AD and in part by MCIN/AEI/10.13039/501100011033 with contributions by the “European Union Next Generation EU/PRTR” under Grant PID2021-126436OB-C22, Grant CEX2020-001058-M, and Grant RYC2019-027000-I- the latter supporting Dr. Weiqiang Li. The work of Jilun Peng was supported by the China Scholarship Council under Grant 202106560003., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward the Exploitation of HydroGNSS Coherent Channel: High Sampling Rate Products

  • Peng, Jilun
  • Cardellach, Estel
  • Li, Weiqiang
  • Ribó, Serni
  • Rius, Antonio
HydroGNSS is a European Space Agency (ESA) 2-satellite mission scheduled for launch in the second half of 2025, equipped to continuously operate dual-frequency, dual-polarization GNSS reflectometry (GNSS-R) receivers. It will also utilize a high-rate complex signal mode, called “coherent channel,” to capture both the in-phase and quadrature components of signals reflected at the specular point during most of the duty cycle. This operation will result in a substantial volume of high-resolution GNSS-R data being available for analysis and applications. The three variables to be provided by the HydroGNSS coherent channel are described here and validated with CYGNSS raw intermediate frequency (IF) signals. The coherence coefficient (CC) and the normalized amplitude (NA), developed from the peak phasors using 4-ms coherent integration time, were compared to the “full entropy” available in the CYGNSS calibrated raw IF product. NA has a similar sensitivity to water surfaces as the full entropy and is not significantly affected by the coherent integration time. CC exhibits a higher sensitivity to small water bodies, yet it strongly depends on the coherent integration time. We also present a new product, the high sampling rate reflectivity (HSRR). It is here defined and compared to CYGNSS L1 low rate reflectivity as well as to the high sampling rate (hsr) CYGNSS calibrated raw IF reflectivity, showing a correlation above 0.92. Its effectiveness has been further validated by a physical model, and its uncertainty was preliminarily assessed using data from two nearby tracks. The results demonstrate that HSRR can be a valuable tool for retrieving geophysical parameters, offering a much finer resolution than the 1–2-Hz product., This work was supported in part by Ministerio de Ciencia Innovación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 through “European Union Next Generation European Union/Plan de Recuperación, Transformación y Resiliencia (EU/PRTR)” under Grant PID2021- 126436OB-C22 and Grant CEX2020-001058-M; and in part by the European Space Agency (ESA) in preparation to the HydroGNSS Scout mission under Grant C.N. 4000135686/21/NL/AD. The work of Jilun Peng was supported by China Scholarship Council under Grant 202106560003. The work of Weiqiang Li was supported by China Scholarship Council under Grant RYC2019- 027000-I., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarimetric Radio Occultation Forward Scattering Sensitivity to Hydrometeor Habit

  • Padullés, Ramon
  • Cardellach, Estel
  • Paz, Antía
  • Turk, F. Joseph
© 2025. Jet Propulsion Laboratory, California Institute of Technology and The Author(s). Government sponsorship acknowledged., The sensitivity of the polarimetric radio occultation (PRO) observable (ΔΦ) to different hydrometeor habits is assessed using discrete dipole approximation forward scattering computations in the PRO geometry. The used habits are those in the atmospheric radiative transfer simulator database. Results indicate that differences of more than one order of magnitude are to be expected when using plate-like habits with respect to soft aggregates, which may change significantly when a non-zero dispersion in the distribution of the tilt angles is assumed. The sensitivity of ΔΦ to different habits is assessed comparing actual observations with simulations performed using the weather research forecast model. For the studied case, the presence of plate-like habits is ruled out, and more importantly, it shows how PRO can be used to further constrain the shape of particles present in the sounded weather events, which may have implications for radiative transfer and data assimilation in numerical weather prediction models., This publication is part of the Grants RYC2021-033309-I and PID2021-126436OB-C22 funded by the MCIN/AEI (https://doi.org/10.13039/501100011033) and the European Union “NextGenerationEU/PRTR” and “ERDF A way of making Europe.” Work performed at the ICE-CSIC was also partially supported by the program Unidad de Excelencia María de Maeztu CEX2020-001058-M. The computation of the look-up tables of the PRO scattering amplitude matrix was done for the EUMETSAT ROM SAF. The work performed by F. Joseph Turk has been conducted at the Jet Propulsion Laboratory, California Institute of Technology, under contract with NASA. The authors would like to thank the anonymous reviewers for their valuable comments and suggestions that helped improve this manuscript., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetohydrodynamic effects on radio signal propagation in a plasma flow

  • Felgueiras Luís, Diana
  • Viladegut, Alan
  • Schlachter, Sonja I.
  • Dalban-Canassy, Matthieu
  • Oswald, Johannes W.
  • Herdrich, Georg
  • Camps, Adriano
  • Chazot, Olivier
The plasma around a reentry spacecraft causes the charged particles to interact with the electromagnetic waves emitted by the on-board antennas, and the vehicle experiences radio communication difficulties. A proposed way to mitigate the radio blackout is the magnetic field alleviation technique that consists of superimposing a magnetic field onto the flow, converting the plasma into an anisotropic medium, and changing its refractive index. The applied magnetic field leads to the creation of an extraordinary wave that can propagate for plasma frequencies higher than the radio signal frequency. In this work, a probe containing a cryogenically-cooled high-temperature superconducting magnet is used to study the effect of an applied magnetic field on the plasma flow and on the radio signal propagation, in the VKI Plasmatron facility. The magnetized plasma is characterized by optical emission spectroscopy, stagnation heat flux, and dynamic pressure measurements. The experimental radio signal measurements are conducted using conical horn antennas, operating at frequencies in the Ka-band. An antenna is placed inside of the magnetic probe, transmitting toward a stagnant air plasma flow. The applied magnetic field causes an increase of the flow temperature, leading to an augmentation of the plasma frequency and stagnation heat flux, due to the Hall effect. No significant effects are observed in the signal transmission and attenuation, while the signal reflection trend is consistent with the variation of magnetic field strength, and plasma and collision frequencies. The dependency of the Faraday rotation with the magnetic field and its direction is observed. While a clear demonstration of the magnetic window is not conclusively observed in the transmission parameters, the behavior of the reflection coefficient shows that the radio blackout mitigation is feasible at optimal combinations of flow ionization., Diana Luís research is funded by a doctoral fellowship (2021.04930.BD) Granted by Fundação para a Ciência e Tecnologia (FCT Portugal). The MEESST project is funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 899298. Prof. Adriano Camps research is funded by Project GENESIS (PID 2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/5011000H033/ and EU ERDF "A way to do Europe!". The authors would like to thank Pascal Collin, from VKI, for his valuable help as Plasmatron operator, and Nicolas Lefevre, from Absolut System, for helping installing and debugging the MHD probe in the Plasmatron facility. Dr. Andrea Fagnani is acknowledged for sharing the codes for the preliminary processing of the spectroscopy measurements. Dr. Vatsalya Sharma and Dr. Vincent Giangaspero, from KU Leuven, are acknowledged for running the COMET solver for simulation of the magnetized plasma flowfield., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

S-Band CCSDS Compatible Transmitter Communications Layer for CubeSats

  • Gracia-Sola, Guillem
  • Gonga, Amadeu
  • Pérez-Portero, Adrián
  • Contreras-Benito, Luis
  • Osipova, Ksenia
  • Camps, Adriano
  • Jallad, Abdul Halim
The Remote sensing and Interference detector with radiomeTry and vegetation Analysis (RITA) is an Earth Observation (EO) payload developed by the Universitat Politècnica de Catalunya (UPC) NanoSat Lab, winner of the Second IEEE GRSS Student Grand Challenge, flying aboard AlainSat-1, a 3U CubeSat from the National Space Science and Technology Center (NSSTC) of the United Arab Emirates. RITA hosts three experiments: an L-band Microwave Radiometer (MWR) for soil moisture and sea ice data collection, a LoRa transceiver enabling on-demand experiment execution via ground sensors, and a Near-Infrared (NIR) Hyperspectral Camera for vegetation monitoring and water mapping. To transmit scientific data from the payload to ground stations, RITA employs an S-Band down-link compatible with Consultative Committee for Space Data Systems (CCSDS) standards, also used for AlainSat-1’s telemetry and scientific data transmission. Standard communications protocols increase mission success rates and enable interoperability between agencies and future scalability. This work presents the implementation of Processing System (PS) and Programmable Logic (PL) CCSDS compatible S-Band down-link communications for AlainSat-1., This work was supported in part by the 2nd Student Grand Challenge (SGC) of the IEEE Geoscience and Remote Sensing Society (IEEE-GRSS), and in part by the Project ‘‘GENESIS: Global Navigation Satellite Systems (GNSS) Environmental and Societal Missions—Subproject Universitat Politècnica de Catalunya (UPC)’’ funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and European Union (EU) Fondo Europeo de Desarrollo Regional (FEDER) ‘‘Una manera de hacer Europa’’ under Grant PID2021-126436OB-C21. The work of G. Gracia-Sola, A. Gonga, L. Contreras-Benito, and K. Osipova was supported by the Predoctoral Program Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR)-Formació d’Investigador (FI) Ajuts Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat de Catalunya, Spain, and European Social Plus Fund under Grant 2024 FI-1 00152, Grant 2022 FI-B 00809, Grant 2023 FI-1 00477, and Grant 2023 FI-1 00239. The work of A. Perez-Portero was supported by the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) Generalitat de Catalunya, for recruitment of early-stage research staff under Grant FISDUR2020/105., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Constraining microphysics assumptions on the modeling of Atmospheric Rivers using GNSS Polarimetric Radio Occultations

  • Paz, Antía
  • Padullés, Ramon
  • Cardellach, Estel
Improving the representation of precipitation in weather and climate models remains a major challenge, particularly due to uncertainties in microphysical parameterizations that govern hydrometeor characteristics and behavior. The Polarimetric Radio Occultation (PRO) technique enhances the standard Radio Occultation (RO) method by offering vertical profiles of both precipitation structure and thermodynamic atmospheric variables. PRO achieves this by utilizing two orthogonal polarizations - horizontal (H) and vertical (V) - to measure the differential phase shift ( "φ), which represents the difference in phase delay between the two of them. This study focuses on assessing the sensitivity of the PRO technique to the vertical structure of hydrometeors under different microphysical assumptions. To explore this sensitivity, simulations are conducted using the Weather Research and Forecasting (WRF) model, with particular attention to the effects of different microphysics schemes on the simulated "φ. The study also incorporates the Atmospheric Radiative Transfer Simulator (ARTS) particle database to characterize hydrometeors based on their scattering properties. Atmospheric Rivers (ARs) are used as a case study. The "φ values simulated under different microphysics schemes are compared to GNSS-PRO observational data from PAZ and Spire satellites, providing a means to evaluate the performance of the WRF microphysics parameterizations. A simplified forward operator is built in terms of water content (WC) and x-parameter (factor relating WC and specific differential phase shift, Kdp), and the best value for x is obtained through optimization techniques after comparing with actual "φ observations. The lowest cost function values systematically correspond to Goddard and WSM6 microphysics (75 % of the cases). Similarly, the best choice for the x-parameter values approach ĝ1/40.1 mm (kg m-2)-1. Once compared to the results from the ARTS particle database, the particle habits that best represent such relationship are bullet rosettes and snow aggregates., This publication is part of the Grants RYC2021‐033309‐I and, PID2021-126436OB-C22 and PID2024-155592OB-C22 funded by the MCIN/AEI (https://doi.org/10.13039/501100011033) and the European Union “NextGenerationEU/PRTR” and “ERDF A way of making Europe”. Work performed at the ICE-CSIC was also partially supported by the program Unidad de Excelencia María de Maeztu CEX2020-001058-M., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Improved Neural-Network to Estimate the Inputs of Rino’s Ionospheric Scintillation Model

  • Molina, Carlos
  • Camps, Adriano
Ionospheric scintillation is a well-known effect that occurs when electromagnetic waves pass through the ionosphere, leading to rapid fluctuations in the phase and intensity of the received signal. In 1979, Charles Rino introduced a theory to compute the expected ionospheric scintillation. However, Rino’s model requires knowing some input variables related to the physical properties of the ionosphere’s plasma density irregularities. The wideband ionospheric scintillation model (WBMOD) model was especially developed to provide these parameters from climatological data as a function of several environmental conditions; however, the use of this model requires a license. In this study, using large datasets from past studies, a neural network has been trained to estimate the main output parameters from WBMOD: the probability density function of C<inf>k</inf>L and the value of the p-slope (slope of power spectra of phase scintillation). This allows retrieving Rino’s input variable to compute the scintillation indices S<inf>4</inf> and σ<inf>φ</inf>. The resulting software, called IonoSciNN, has been published as an open web application., This work was supported in part by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC under Grant PID2021-126436OBC21 sponsored by MCIN/AEI/10.13039/501100011033/ and in part by the IEEC INTREPID project, in which this study is contextualized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Simplified Model for Simulating Complex Signals in GNSS-Reflectometry over Land

  • Peng, Jilun
  • Cardellach, Estel
  • Li, Weiqiang
The availability of complex signals in global navigation satellite system-reflectometry (GNSS-R) has gained growing attention across a range of applications, due to its capacity to preserve phase information and provide high along-track resolution. HydroGNSS will employ a high-rate complex signal mode, known as the “coherent channel,” to capture both the in-phase and quadrature components of signals reflected at the specular point. This work presents a simulation framework for analyzing the coherent channel in GNSS-R at high temporal resolution. Given the computational resources and limitations of fully detailed simulations, a simplified model is proposed, which incorporates a well established reflectivity model, and new empirical and theoretical functions. The surface reflectivity model estimates it from parameters, such as soil roughness, moisture, vegetation cover, and water fraction, while the innovative modeling block, here called the complex field model, derives the coherent and diffuse field amplitudes from reflectivity, and it assigns electromagnetic phases that behave, statistically, as in actual data. The validation is conducted at different levels, first using actual amplitude and reflectivity measurements as input, then starting from auxiliary surface information, yielding correlations with the coherence coefficient of 0.93, 0.74, and 0.61, respectively. This validation approach facilitates the differentiation of the errors introduced by each of the modules. The results support the feasibility of the proposed framework as a practical and quick tool to investigate complex signals under varying reflected surface conditions. Higher accuracy will require a tighter integration of the surface reflectivity model and the complex field mode., This work was supported in part by the ESA C.N. under Grant 4000135686/21/NL/AD in preparation to the HydroGNSS Scout mission, in part by the China Scholarship Council under Grant 202106560003, Grant PID2021-126436OB-C22, and Grant PID2024-155592OB-C22, in part by the MICIU/AEI under Grant 10.13039/501100011033 and in part by the European Union “NextGenerationEU/PRTR” and “ERDF A way of making Europe” Programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radio wave propagation through a characterized CO2 plasma flow

  • Felgueiras Luís, Diana
  • Viladegut, Alan
  • Chazot, Olivier
  • Camps, Adriano
The high levels of ionization of the plasma layer created around a spacecraft during the reentry in planetary atmospheres can cause disruption of the communications, leading to a radio blackout phenomenon. The entry, descending and landing phase of a Mars mission includes degradation and complete loss of the signal for a few minutes. This work, as part of the Horizon 2020 Magnetohydrodynamics Enhanced Entry System for Space Transportation (MEESST) project, presents experimental measurements of radio signal propagation for the first time through a stagnant flow of a CO2 plasma, representative of Mars entry flows. The measurements are conducted at the VKI plasma wind tunnel, the Plasmatron facility, using conical horn antennas at the Ka-band, transmitting inside an optimally designed probe. The probe designed at VKI and its characterization at the UPC anechoic chamber are detailed. The temperature of the plasma flow is measured by means of optical emission spectroscopy, to estimate the plasma frequency and to correlate it with the experimental signal propagation results. The measurements at the plasma wind tunnel show that the signal propagates almost undisturbed for low electric powers (and plasma frequencies), being its magnitude attenuated and its polarization rotated at higher electric powers, when the electron number densities are higher., Diana Luís research is funded by a doctoral fellowship (2021.04930.BD) granted by Fundação para a Ciência e Tecnologia (FCT Portugal). The MEESST project is funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 899298. Prof. Adriano Camps research is funded by project GENESIS (PID 2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/5011000H033/ and EU ERDF “A way to do Europe!”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operational and regulatory assessment for satellites recycling

  • Buitrago-Leiva, Jeimmy Nataly
  • El-Khayati-Ramouz, Mohamed
  • Camps, Adriano
  • Ruíz-de-Azúa, Joan Adrià
Recycling abandoned or partially failed satellites, also known as zombie satellites (ZSs), is an emerging concept that can significantly reduce the number of satellites to be launched, and ultimately the amount of space junk. By assessing and leveraging the remaining capabilities of those satellites, they can be repurposed for missions different from the initial one. This work conducts an operability assessment of satellite recycling by exploiting their remaining subsystems and equipment for telecommunications and Earth Observation applications. Additionally, the international and national regulatory frameworks relevant to the legal repurposing of satellites are examined and discussed in this paper. Finally, to incorporate recycling considerations into satellite design, various standardization approaches are discussed for future satellite missions., This work was sponsored by the project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gap-free GNSS-R wind field reconstruction: A neural mapping scheme and initial validation

  • Du, Hao
  • Fablet, Ronan
  • Nguyen, Thi Thuy Nga
  • Li, Weiqiang
  • Cardellach, Estel
  • Chapron, Bertrand
Spaceborne Global Navigation Satellite System Reflectometry (GNSS-R) has been widely demonstrated as an effective method for ocean wind speed retrieval. This study explores the feasibility of using track-wise GNSS-R wind products to generate gap-free wind fields. A physics-informed neural mapping scheme, 4DVarNet, is adapted to reconstruct wind fields. Results indicate that the root mean square errors (RMSEs) of the 1-hour, 3-hour, and 6-hour 4DVarNet winds are 1.13 m/s, 1.16 m/s, and 1.24 m/s compared to European Center for Medium-Range Weather Forecast (ECMWF) ERA5 wind products, while 1.40 m/s, 1.41 m/s, and 1.48 m/s are referred to Advanced Microwave Scanning Radiometer-2 (AMSR2) all-weather winds. Spatial and temporal error analyses further confirm the robustness of 4DVarNet-derived winds, with daily RMSEs remaining below 1.6 m/s. Error decomposition reveals discrepancies between ECMWF and GNSS-R winds, which may support future recalibration of GNSS-R wind products or enhancements to ECMWF forecasts. A case study of Super Typhoon Surigae proves that 4DVarNet winds closely align with the International Best Track Archive for Climate Stewardship (IBTrACS) track data. The reconstructed winds detect the peak intensity temporally consistent with IBTrACS data, whereas ECMWF forecasts exhibit a two-day lag. Moreover, asymmetries in Tropical Storm Kompasu are observed, with the radius of maximum wind (R<inf>max</inf>[jls-end-space/]) over the Northeast quadrant 38% larger than that over the Northwest quadrant. Despite the absence of background wind field inputs, 4DVarNet effectively learns wind patterns from ECMWF data and integrates GNSS-R observations to generate gap-free wind mappings, exhibiting strong agreement with ECMWF wind fields. The reconstruction performance is degraded at high winds due to the underestimation of referenced ECMWF ERA5 winds and the small quantity of observations. This limitation could be alleviated through denser GNSS-R observations from multiple missions such as Fengyun-3, Tianmu-1, recently launched HydroGNSS, etc., and other training references with more high winds for improving the representation of 4DVarNet at high winds., This work is partially supported by Grants PID2021-126436OB-C22 and the Spanish program Unidad de Excelencia María de Maeztu CEX2020-001058-M, all funded by MCIN/AEI/10.13039/501100011033 with contributions by “European Union Next Generation EU/ PRTR”, and is also supported by Grant 20215AT007 funded by Spanish National Research Council. This work of Hao Du is supported in part by the China Scholarship Council (CSC) through a State Scholarship Fund (No.202206270011). This work is also partially funded by the French ANR, as part of the OceaniX (ANR-19-CHIA-0016); it is also supported by CNES (French Space Agency); and EU Horizon Europe project EDITO Model Lab (Grant 101093293). It benefits from resources from CPER AIDA GPU cluster supported by the Regional Council of Brittany and FEDER. This work is also supported by ESA Marine Atmosphere eXtreme Satellite Synergy (MAXSS) 4000132954/20/I-NB. The authors are grateful to the public NOAA CYGNSS Level 2 Science Wind Speed 25-km Product Version 1.2 (available at doi: https://doi.org/10.5067/CYGNN-22512), ECMWF ERA5 reanalysis wind products (available at doi: https://doi.org/10.24381/cds.adbb2d47), AMSR2 L3 daily all-weather wind products (available at doi: https://doi.org/10.56236/RSS-bq), and International Best Track Archive for Climate Stewardship (IBTrACS) tropical cyclone datasets (available at doi: https://doi.org/10.25921/82ty-9e16). W. Li and E. Cardellach are members of the CYGNSS mission’s extended science team., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single Channel Receiver Architecture for Auto-Calibrated Passive Reflectometry Using Wideband Signals

  • Ribó, Serni
  • Canalda, Xavier
  • Cardellach, Estel
  • Li, Weiqiang
  • Rius, Antonio
A compact single-channel receiver architecture for passive reflectometry using signals of opportunity (SoOP) is presented. It aims to provide a simple receiver architecture that can be employed for surface and root-zone soil moisture (RZSM) measurements. The main characteristic of this architecture is that direct and reflected signals are collected with a single antenna and down-conversion chain, and that this has the advantage that the system is auto-calibrated, as direct and reflected signals are affected identically by the instrument (antenna pattern needs to be characterized). The use of a single antenna and receiver channels allows for reducing the mass and power consumption, which is especially important for small-format platforms such as drones and nano-satellites. In addition, the processing method provides means to reduce the effect of the receiver noise on the measurements. This article presents the instrumental concept, simulation results, and a laboratory verification of the proposed architecture and methods., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Project TED2021-129812B-I00; in part by European Union (EU) “NextGenerationEU”/Plan de Recuperacion, ´ Transformacion y Resiliencia (PRTR); in part by the Research Project ´ under Grant PID2021-126436OB-C22/AEI/10.13039/501100011033/Fondo Europeo de Desarrollo Regional (FEDER), Union Europea (UE); in part ´ by MCIN/AEI/10.13039/501100011033 With Contributions by “European Union Next Generation EU/PRTR” under Grant RYC2019-027000-I; in part by Spanish Program Unidad de Excelencia Mar´ıa de Maeztu through European Union NextGeneration EU under Grant CEX2020-001058-M and Grant PRTR-C17.I1; and in part by Spanish National Research Council (CSIC) under Grant MAX4-SOMMA-ICE, With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001058-M), Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A fast and efficient method to estimate inland water levels using CYGNSS L1 data and DTMs: Application to floods, lakes and reservoirs monitoring

  • Ma, Zhongmin
  • Zhang, Shuangcheng
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Hyuk, Park|||0000-0003-0031-0802
  • Liu, Qi
  • Tan, Pengyuan
  • Wang, Changyang
Numerous studies have demonstrated the effectiveness of CYGNSS (Cyclone Global Navigation Satellite System) data to detect inland water bodies. However, most of them focus on the detection of surface water extent, rather than the water levels and depths. Most of the existing studies on inland water level altimetry using CYGNSS data are based on the CYGNSS raw IF (raw Intermediate Frequency) data, and use either the time-delay or the phase methods. Although high accuracy can be obtained, raw IF data are currently not a CYGNSS standard data product, and thus it cannot be applied to emergency detection of sudden flood events, or long time-series monitoring of a single large inland water body. Based on these research gaps, this study presents an effective method to estimate the water levels and depths (on a 3 km grid) by combining CYGNSS L1 standard data with DTM (Digital Terrain Model) information. We compared the CYGNSS retrieved water levels with other water level reference data for eight case studies with different characteristics (3 floods, 3 lakes, and 2 reservoirs). The spaceborne LiDAR ICESat-2 and GEDI are used for the flood case studies, and water levels from DAHITI and Hydroweb databases are used for long-term changes of the lakes and reservoirs. All comparative validations yield encouraging results. For flood cases, comparison with ICESat-2 and GEDI showed strong correlation (mean R values for the three case studies were 0.98). The mean bias of CYGNSS retrieved water levels was - 0.26 m, and the mean RMSE was 1.34 m. For lakes and reservoirs, the comparison to DAHITI and Hydroweb showed a mean correlation value of 0.62 (R), while the mean bias and RMSE were - 0.63 m, and 2.61 m, respectively. Finally, the sources of uncertainty are discussed, including the effect of topography discretization, and the effect of uncertainty in the determination of surface water boundaries. This study demonstrates the feasibility of combining CYGNSS L1 standard data with DTM data to measure inland water levels, highlighting its suitability to monitor both flash floods and long-term changes of lake and reservoir water levels. This rapidly updatable water level information will contribute to further comparisons and hydrological researches., This research was funded by the National Natural Science Foundation of China Projects (Grant No.42074041); The National Key Research and Development Program of China (Grant No.2020YFC1512000); Shaanxi Province Science and Technology Innovation Team (Ref. 2021TD-51); The innovation team of ShaanXi Provincial Tri-Qin Scholars with Geoscience Big Data and Geohazard Prevention (2022) and the Fundamental Research Funds for the Central Universities (CHD300102263715). This research has also been partially funded by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC”, Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER “Una manera de hacer Europa”. Zhongmin Ma’s work was partly supported by the China Scholarship Council (CSC) through a State Scholarship Fund (No. 202306560073)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Preliminary design of satellite systems through the integration of model-based system engineering and Agile methodologies: application to the 3ColStar Mission

  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • Mejía González, Juan José
  • Puerta Ibarra, Juan Francisco
  • Acero Niño, Ignacio Francisco
  • Guarnizo Saavedra, Andrés Felipe
  • Rodríguez Ferreira, Julián
  • Rojas Rodríguez, Leandro
  • Hernández Torres, Francisco Luis
  • Arango Cotacio, Cristian Esteban
  • Salazar Morales, Jorge Enrique
  • Herrera Cruz, Miguel Angel
  • Linares Vásquez, Mario
  • Jiménez Vargas, Jose Fernando
  • Espíndola Díaz, Jorge Enrique
  • Montañez Sogamoso, Óscar Javier
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
This paper presents a case study on integrating Agile Systems Engineering methodologies in the preliminary design phase of satellite systems, focusing on the 3ColStar satellite mission. Through Model-Based Systems Engineering (MBSE), technical consistency was rigorously managed across various architectural documents, ensuring coherency and minimizing errors. Furthermore, the preliminary design was developed, with the implementation of the Arcadia Method, supported by the Capella modeling tool. This allowed the digitalization of the system, which was represented by models that contain requirements, architecture, and interfaces between the different parts of the system. At the same time, the preliminary design process was streamlined and completed within an accelerated time frame of 4 months, with weekly sprints driving progress based on the scrum methodology. This case study highlights the effectiveness of Agile Systems Engineering principles to improve the team communication accuracy, communication, and efficiency of satellite systems preliminary design, providing valuable insights for future missions., This work was sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21; MCIN/AEI/10.13039/501100011033/; EU ERDF “A way to do Europe”; and the research and public 2024 grant from Universidad de los Andes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Architecting CubeSat constellations for messaging service, Part II

  • Osipova, Kseniia|||0000-0003-3473-7900
  • Golkar, Alessandro
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Ruiz de Azua, Joan Adria
  • Contreras Benito, Luis Juan|||0000-0002-5379-4778
  • Garzaniti, Nicola
  • Fernández Capón, Lara Pilar|||0000-0002-1223-6892
Data collection and exchange stand as a cornerstone technology driving the advancement of technological development over recent decades. However, many remote and hard-to-reach regions remain devoid of terrestrial communication infrastructure. Telecommunication satellites offer a comprehensive solution, facilitating data transfer to even the most remote areas and bridging existing connectivity gaps. Currently, there are two distinct types of systems under development by private companies aiming to enable direct-to-handset connectivity. The first type strives to offer mobile connectivity based on 3GPP standards with unmodified smartphones but these satellites are expensive and heavy. The second type of satellites provides low data rates connectivity using Internet of Things technologies to send and receive data packets. These satellites, in contrast, are more lightweight, low-cost, and can take the form of CubeSats or even PocketQubes. This study proposes a fusion of the advantages of both systems, contemplating a constellation for messaging services employing low-power user devices and LoRa technology. In Part I of the study the LoRa channel capability was analyzed to enable the transmission of at least 1 message per day in the area with the highest concentration of users, uncovered by terrestrial cell towers and downselected 73 different LoRa connectivity payloads. Part II concentrates on various aspects of constellation design, encompassing the sizing of the CubeSat platform, messages transmission simulation approach, and constellation launch strategies. Employing a trade-space exploration approach, the study identified a preferred Low Earth Orbit (LEO) constellation architecture out of a pool of 11 826, capable of satisfying 51% of the demand and yielding the highest revenue among all the considered constellations. The performance analysis revealed that coverage and spreading factor are the paramount factors in serving users. The architectural analysis framework presented here can serve as a valuable tool for the preliminary design and sizing of a constellation for different services based on short data packets transmission, while the gained insights regarding performance drives have the potential to enrich the development of future Internet of Things connectivity projects., This has been supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This project was also sponsored in part by the project ‘‘GENESIS: GNSS Environmental and Societal Missions – Subproject UPC’’, Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER ‘‘Una manera de hacer Europa’’. This study would also not have been possible without the support of the Skolkovo Institute of Science and Technology, whose funding enabled the international collaboration through its Academic Mobility program. During the preparation of this work the authors used ChatGPT [93] in order to improve language and readability. After using this tool, the authors reviewed and edited the content as needed, and take full responsibility for the content of the publication., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

RF-Assisted compensation for rapid optical acquisition in hybrid inter-satellite links

  • Fernández Niño, Elena
  • Fraire, Juan A.
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
Establishing Optical Inter-Satellite Links (O-ISLs) requires sub-degree pointing accuracy between fast-moving satellites, a challenge resulting from actuator limitations and positioning uncertainties. This work proposes a novel pointing strategy for Hybrid Inter-Satellite Links (H-ISLs), i.e. combining Radio-Frequency (RF) and Optical technologies, to maximize usable contact time. The strategy leverages TLE-based pre-pointing executed before the line-of-sight contact to eliminate the actuator-induced transient regime from the contact window. Once the RF-ISL is established, satellites exchange updated GNSS data to refine pointing accuracy which narrows the initial optical uncertainty cone. This shortens the optical spatial-acquisition time and increases the effective transmission time of the O-ISL. The approach is evaluated through simulations incorporating actuator dynamics and degraded TLE updates. Results show that the transient pointing error is reduced from 167° to less than 2.5°, effective optical transmission time increases from 72% to over 99%, and memory buffering requirements drop more than 98%. This work demonstrates the feasibility and performance benefits of RF-assisted pre-pointing in smallsats O-ISLs., This work was supported and funded by the by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021- 5-6GSatNet-SS), and by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia. Additionally, this work has also been partially funded by the Ministry of Science and Innovation MICIN/Agencia Estatal de Investigación AEI/10.13039/501100811033, the Spanish MCIU/AEI/10.13039/501100011033/FEDER/UE through project PID2023-146378NB-I00, and EU Feder through the project “GENESIS: GNSS Environmental and Societal missions” grant PID 2021-126436OB-C21. This research was also financed in part by the French National Research Agency (ANR) under the project ANR-22-CE25-0014-01, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Architecting CubeSat constellations for messaging service, Part I

  • Osipova, Kseniia|||0000-0003-3473-7900
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Golkar, Alessandro
  • Ruiz de Azua, Joan Adria
  • Fernández Capón, Lara Pilar|||0000-0002-1223-6892
  • Garzaniti, Nicola
In today’s modern and globalized world, connectivity is a key factor for businesses, production facilities, sensor networks, and ordinary people. However, there are still populated areas which are not covered by ground-based telecommunications infrastructure. This is where telecommunication satellite constellations come in, as they can provide coverage to remote and uninhabited regions and fill existing connectivity gaps to ensure data transfer. LoRa is one of the technologies designed for data transmissions over long distances with low power consumption. Alongside with other technologies of the Low-Power Wide Area Network family, it is widely used for Internet of Things applications. LoRa chirp spread spectrum modulation is robust against the Doppler frequency shifts encountered in low earth orbits, and it has already been used in IoT satellite communications. Due to the low transmitted signal power, the achieved data rate is not high, making it a suitable technology for telecommunications payloads on CubeSat platforms for messaging services. As compared to existing traditional communication satellite systems, CubeSat constellations are low-cost and may offer an affordable connectivity service to developing regions. This study is divided in two parts. In Part I the demand model is built based on the population distribution not covered by cell towers. The LoRa link performance is analyzed, considering the impact of LoRa channel parameters variation, such as spreading factor and channel bandwidth, while satellite orbital height, transmission antenna beamwidth, and transmitter peak power have a direct impact on the payload mass. Among thousands of possible configurations, 73 feasible payload designs have been downselected. In Part II of the study, the satellite mass and the total system cost are estimated based on the payload parameters obtained. Messages transmission simulation via a constellation is conducted in order to identify optimal constellation architectures for messaging service, as well as the main drivers of the system economic profitability. The presented analysis results provide a deeper understanding of LoRa connectivity advantages and limitations together with the performance drivers, which will support the optimization of future LoRa-based satellite communication systems and other IoT satellite constellations., This has been supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This project was also sponsored in part by the project ‘‘GENESIS: GNSS Environmental and Societal Missions – Subproject UPC’’, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”. This study would also not have been possible without the support of the Skolkovo Institute of Science and Technology, whose funding enabled the international collaboration through its Academic Mobility program. During the preparation of this work the authors used ChatGPT [75] in order to improve language and readability. After using this tool, the authors reviewed and edited the content as needed, and take full responsibility for the content of the publication., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

3Cat-8 mission: a 6-Unit CubeSat for ionospheric multisensing and technology demonstration test-bed

  • Contreras Benito, Luis Juan|||0000-0002-5379-4778
  • Osipova, Kseniia|||0000-0003-3473-7900
  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • Gracia Sola, Guillem
  • Coppa, Francesco
  • Climent Salazar, Pau
  • Sopena Coello, Paula
  • Ramos Castro, Juan José|||0000-0001-9413-2001
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
This paper presents the mission analysis of 3Cat-8, a 6-Unit CubeSat mission being developed by the UPC NanoSat Lab for ionospheric research. The primary objective of the mission is to monitor the ionospheric scintillation of the aurora, and to perform several technological demonstrations. The satellite incorporates several novel systems, including a deployable Fresnel Zone Plate Antenna (FZPA), an integrated PocketQube deployer, a dual-receiver GNSS board for radio occultation and reflectometry experiments, and a polarimetric multi-spectral imager for auroral emission observations. The mission design, the suite of payloads, and the concept of operations are described in detail. This paper discusses the current development status of 3Cat-8, with several subsystems already developed and others in the final design phase. It is expected that the data gathered by 3Cat-8 will contribute to a better understanding of ionospheric effects on radio wave propagation and demonstrate the feasibility of compact remote sensors in a CubeSat platform., L.C.-B., K.O. and G.G.-S. were supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477, 2023 FI-1 00239, 2024 FI-1 00152) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This project was also sponsored in part by the project “GENESIS: GNSS Environmental and Societal Missions–Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and by UPC internal funds., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Resource-efficient FPGA architecture for real-time RFI mitigation in interferometric radiometers

  • Pérez Portero, Adrián|||0000-0003-2736-1028
  • Querol Borràs, Jorge|||0000-0002-8500-5534
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Interferometric radiometers operating at L-band, such as ESA’s SMOS mission, enable crucial Earth observations providing high-resolution measurements of soil moisture, ocean salinity, and other geophysical parameters. However, the increasing electromagnetic spectrum utilization has led to significant Radio Frequency Interference (RFI) challenges, particularly critical given the sensors’ fine temperature resolution requirements of less than 1 K. This work presents the hardware implementation of an advanced RFI detection and mitigation algorithm specifically designed for interferometric radiometers, targeting future L-band missions. The implementation processes 1-bit quantized signals at 57.69375 MHz from multiple receivers, employing time-frequency analysis and polarimetric detection techniques while optimizing Field Programmable Gate Array (FPGA) resource utilization. Novel optimization strategies include overclocked processing cores operating at 230.775 MHz, efficient resource sharing through operation serialization, and strategic memory management. The system achieves real-time processing capabilities while maintaining detection probabilities above 63% with false alarm rates below 1% for typical interference scenarios. Performance validation using synthetic datasets demonstrates robust operation across various RFI conditions, making this implementation suitable as part of the RFI detection and mitigation efforts for future interferometric radiometer missions beyond SMOS., This research was funded by ESA, grant number ITT AO9359, by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and grant for recruitment of early stage research staff of Agència Gestió d’Ajuts Universitaris i de Recerca (AGAUR) Generalitat de Catalunya, Spain (FISDUR2020/105)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Retrieval of planetary boundary layer height from CALIPSO satellite observations using a machine learning approach

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Argañaraz, Carina Inés
  • Curci, Gabriele
  • Lolli, Simone
The planetary boundary layer height (PBLH) is a key variable in air quality, climate modeling, and weather prediction. Traditional retrieval methods, such as radiosondes, provide high accuracy but lack spatial coverage. This study presents a Random Forest (RF) model based on Machine Learning (ML) to estimate PBLH from ten years of Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), using radiosonde measurements as a reference. The model achieves an R2 of 0.67 and an RMSE of 278.02 m with a spatial resolution of ˜ 20 × 20 km2 in a test set that covers mainly Europe and North America. Unlike previous methods, our approach does not require atmospheric typing and uses minimal data filtering, demonstrating robustness under diverse aerosol and cloud conditions. Although validation is currently limited to mid-latitude regions, the method offers a scalable approach to global monitoring and supports the management of climate and air quality. Future work will extend the validation to other geographic zones and explore deep learning models for further improvements., The authors acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on 14.9.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title PBLhsat CUP P20224AT3 W Grant Assignment Decree No. 965 adopted on 30 June 2023 by the Italian Ministry of University and Research (MUR) and the research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 y FEDER ‘‘Una manera de hacer Europa’’. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards a second life for Zombie Satellites: Anomaly occurrence and potential recycling assessment

  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • El Khayati Ramouz, Mohamed|||0000-0001-7175-7324
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
This document is the partial result of an ongoing satellite research activity carried out by Universitat Politècnica de Catalunya NanoSat Lab and i2CAT Foundation, submitted to the Horizon Europe Program in 2022., Thousands of rockets, spaceships, and satellites have been launched, resulting in a steady increase in the number of space debris notably in Low Earth Orbit (LEO) and Geostationary Orbit (GEO). Among the objects comprising space debris, defunct satellites are commonly found, which may have been abandoned in space due to various anomalies. While these satellite failures may not be catastrophic, certain subsystems could still be repurposed for alternative uses beyond their initial design. This study aims to assess the feasibility of “recycling” partially failed satellites, also known as “Zombie Satellites”, by statistically evaluating the severity of their anomalies and quantifying their remaining capabilities and limitations. By conducting a comprehensive statistical analysis, the anomalies have been categorized based on subsystem, orbit type, occurrence date during the satellite’s lifespan, and severity. Additionally, an analysis is presented to identify failed satellites from some of the current large constellations., This work was sponsored in part by the I+D+i project of UPC GENESIS project PID 2021-1264360B-C21 financed by MCIN/AEI. Additionally, this work was supported by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union–NextGeneration EU , in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-8-6GSatNet-SeS)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Statistical analysis of LEO and GEO satellite anomalies and space radiation

  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • El Khayati Ramouz, Mohamed|||0000-0001-7175-7324
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
Exposure to space radiation substantially degrades satellite systems, provoking severe partial or, in some extreme cases, total failures. Electrostatic discharges (ESD), single event latch-up (SEL), and single event upsets (SEU) are among the most frequent causes of those reported satellite anomalies. The impact of space radiation dose on satellite equipment has been studied in-depth. This study conducts a statistical analysis to explore the relationships between low-Earth orbit (LEO) and geostationary orbit (GEO) satellite anomalies and particle concentrations, solar and geomagnetic activity in the period 2010–2022. Through a monthly and daily timescale analysis, the present work explores the temporal response of space disturbances on satellite systems and the periods when satellites are vulnerable to those disturbances., This work was sponsored by project “GENESIS: GSSN Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advances in soil moisture mapping techniques and disaggregation algorithms for environmental and agricultural applications

  • Pablos Hernández, Miriam|||0000-0003-2694-7107
  • Portal González, Gerard|||0000-0003-0797-6711
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Vall-Llossera Ferran, Mercedes Magdalena|||0000-0003-1357-7098
  • López Martínez, Carlos|||0000-0002-1366-9446
Treball presentat a: ISPRS Geospatial Week 2025 “Photogrammetry & Remote Sensing for a Better Tomorrow…”, 6–11 April 2025, Dubai, UAE, Soil moisture (SM) is a critical variable for understanding the water cycle, climate change, and agricultural management. This paper reviews advanced remote sensing techniques and disaggregation algorithms for high-resolution SM mapping, focusing on environmental and agricultural applications in North Africa and the UAE. Remote sensing methods, including optical sensors (e.g., Apparent Thermal Inertia, Temperature Vegetation Dryness Index), active microwave sensors (scatterometers, Synthetic Aperture Radar), and passive microwave radiometers (SMOS, SMAP), are evaluated for their ability to map SM at varying spatial and temporal scales. Despite advancements, coarse resolution remains a challenge for regional applications. To address this, two innovative downscaling algorithms are presented: the SMOS Semi-Empirical Method, which fuses SMOS data with ECMWF skin temperature and MODIS/Sentinel-3 NDVI to achieve 1 km and 300 m resolutions, and the Artificial Neural Network (ANN) Method, leveraging multi-sensor data to produce 60 m resolution SM maps. These algorithms have been validated across diverse environments, demonstrating RMSE values of 0.04–0.10 cm3/cm3. The case studies presented highlight their operational utility in flash flood monitoring (Algeria, Tunisia, UAE), ecosystem dynamics (Chott el Djerid, Tunisia), and precision agriculture (East Oweinat, Egypt). Future work includes the integration of multi-sensor data, to enhance machine learning models, and the improvement of SM measurements at deeper soil layers to support applications in arid regions., This research was supported by the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033) through projects INTERACT (PID2020-114623RB-C32) and GENESIS (PID2021-126436OB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Operational and regulatory assessment for satellites recycling

  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • El Khayati Ramouz, Mohamed|||0000-0001-7175-7324
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
Recycling abandoned or partially failed satellites, also known as zombie satellites (ZSs), is an emerging concept that can significantly reduce the number of satellites to be launched, and ultimately the amount of space junk. By assessing and leveraging the remaining capabilities of those satellites, they can be repurposed for missions different from the initial one. This work conducts an operability assessment of satellite recycling by exploiting their remaining subsystems and equipment for telecommunications and Earth Observation applications. Additionally, the international and national regulatory frameworks relevant to the legal repurposing of satellites are examined and discussed in this paper. Finally, to incorporate recycling considerations into satellite design, various standardization approaches are discussed for future satellite missions., This work was sponsored by the project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Novel magnetic attitude control system for SmallSats with low-thrust propulsion systems

  • Santin Blanco, Oscar
  • Biel Simon, Adrià
  • Navarro Simoni, Pol Eduard
  • Contreras Benito, Luis Juan|||0000-0002-5379-4778
  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • Climent Salazar, Pau
  • Liaño de la Fuente, Emilio
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Di Pasquale, Giuseppe
  • Wijnen, Mick
  • Pérez Grande, Daniel
This work presents a linear magnetic attitude control algorithm for a six-unit CubeSat, with a low-thrust electrical propulsion system for orbital raising, and assesses the performance of the control system. During the orbital raising maneuver, the Attitude Determination and Control Subsystem (ADCS) will be in Thrust Vector Pointing (TVP) mode, aligning the thrust vector with the orbital velocity vector. The study determines the minimum magnetic attitude control capabilities needed to maintain the desired orientation during continuous thrust operations in low Earth orbit. The results demonstrate that a properly sized magnetic attitude control system can achieve pointing accuracies of 3.2° (3s) while consuming only 0.42 W and maintaining 86% reduction in thruster-induced errors - significantly outperforming conventional B-dot controllers (40% reduction) while requiring substantially less mass than reaction wheel systems (0.32 kg vs 0.9-1.2 kg). Through simulations incorporating realistic environmental disturbances and thrust-induced torques, performance maps are developed that establish the relationship between thruster position, thrust magnitude, and required control authority. The innovative contribution of this work is the development and validation of a practical, mass-efficient control solution specifically optimized for low-thrust CubeSat applications, demonstrated through numerical simulations that incorporate detailed hardware characteristics and environmental models. The results enable mission designers to properly size attitude control systems for CubeSats with electric propulsion, ensuring reliable operation while minimizing system mass and power requirements. This study presents: 1. The description of the algorithms used to model the satellite, the thruster, and the actuators; 2. The analysis and configuration of the TVP mode; 3. The performance assessment of the system obtained from the simulation's environment. Without loss of generality, these results can be applied to other CubeSat missions including thrusters., This work was sponsored in part by the I+D+i project of UPC GENESIS project PID 2021-1264360B-C21 financed by MCIN/AEI, and also supported through the collaboration efforts of IENAI SPACE for the ongoing satellite mission 3Cat-8., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The 3Cat-4 spacecraft thermal analysis and thermal vacuum test campaign results

  • Buitrago Leiva, Jeimmy Nataly|||0000-0003-1743-2312
  • Terraza Palanca, Ines
  • Contreras Benito, Luis Juan|||0000-0002-5379-4778
  • Fernández Capón, Lara Pilar|||0000-0002-1223-6892
  • Gràcia i Solà, Guillem|||0000-0002-4301-845X
  • del Castillo Sancho, Cristina
  • Ha, Lily
  • Palma, David
  • Solyga, Malgorzata
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
3Cat-4 is the fourth member of the CubeSat series of UPC’s NanoSat Lab, and it was selected by the ESA Academy’s Fly Your Satellite! program in 2017. This mission aims at demonstrating the capabilities of nano-satellites, and in particular those based in the 1-Unit CubeSat standard, for challenging Earth Observation (EO) using Global Navigation Satellite System-Reflectometry (GNSS-R) and L-band microwave radiometry, as well as for Automatic Identification Systems (AIS). The following study presents the results of the thermal analysis carried out for this mission, evaluating different scenarios, including the most critical cases at both high and low temperatures. The results consider different albedos and orbital parameters in order to establish the optimal temperatures to achieve the best mission performance within the nominal temperatures, and in all operational modes of the satellite. Simulation results are included considering the thermal performance of other materials, such as Kapton, as well as the redesign of the optical properties of the satellite’s solar panels. The correlation with the thermal model and the TVAC test campaign was conducted at the ESA ESEC-GALAXIA facilities in Belgium., This research was funded by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive near real-time RFI mitigation using Karhunen–Loève transform

  • Díez García, Raúl
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
This paper presents a near real-time implementation of the Karhunen–Loève Transform (KLT) for Radio Frequency Interference (RFI) mitigation in microwave radiometry. KLT is a powerful, data-adaptive technique capable of adjusting to various signal types by estimating the covariance matrix of the incoming signal and segmenting its eigenvectors to form an effective RFI basis. In this paper, the KLT is evaluated with real signals in laboratory conditions, aiming to characterize its performance in realistic conditions. To that effect, the dual Rx/Tx capability of a Pluto SDR is used to generate and capture RFI. The main mitigation metrics are computed for the KLT and other commonly used mitigation methods. In addition, while previous studies have shown the effectiveness of offline processing of recorded I/Q data, real-time mitigation is often necessary. Given the computational cost of eigendecomposition, this work introduces a low-complexity solution using the “economy covariance” approach alongside asynchronous covariance decomposition. The proposed implementation, realized within the GNU Radio framework, demonstrates the practical feasibility of real-time KLT-based mitigation and underscores its potential for improving signal integrity in digital radiometers operating under dynamic RFI conditions., This research was funded by ESA, grant number ITT AO9359, by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and grant for recruitment of early stage research staff of Agència Gestió d’Ajuts Universitaris i de Recerca (AGAUR) Generalitat de Catalunya, Spain (FISDUR2020/105)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

RF-assisted uncertainty cone reduction in free-space optical inter-satellite links

  • Fernández Niño, Elena
  • Fraire, Juan A.
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Ruiz de Azua, Joan Adria
One of the space communications industry’s current focuses is developing high-throughput communication terminals for satellite-to-satellite communication links. Optical inter-satellite links provide high data rates, long-range, and robustness against interferences, and they do not require frequency licensing as radiofrequency communication systems. Nevertheless, as the uncertain location of the receiver is comprised in an area larger than that illuminated by the transmitting laser, the pointing accuracy is a critical element in the success of the optical link establishment and maintenance, requiring a pointing, acquisition, and tracking mechanism. The acquisition process is the most time-consuming of the pointing processes, limiting the time available to send data, especially in highly dynamic networks. This paper focuses on reducing the acquisition time by reducing the initial satellite position uncertainty. To this end, a hybrid system that combines RF and optical technologies in a single communication module is proposed. Whereas the control plane is managed via the RF link to exchange more precise global navigation data, the optical link corresponds to the data plane in which payload data is exchanged. The pointing between two satellites is simulated to analyze its behavior, considering the error of cumulative orbital propagation data and global navigation satellite system data. This work also analyzes the cumulative error produced by the propagation of the TLEs over time. Finally, the results show how a system that relies on the exchange of global navigation satellite system positioning data achieves up to 99.45% better-pointing accuracy than a system that bases positioning data on TLE propagation., This work was supported in part by the by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union—NextGeneration EU, in the Framework of the Recovery Plan, Transformation and Resilience (PRTR, Call UNICO I+D 5G 2021) under Grant TSI-063000-2021-5-6GSatNet-SS; in partby the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia; in part by the European Union’s Horizon Europe under Grant 101096526 (ETHER); and in part by the Ministry of Science and Innovation MICIN/Agencia Estatal de Investigación AEI/10.13039/501100811033 and EU Feder through the Project “GENESIS: GNSS Environmental and Societal Missions” under Grant PID 2021-1264360B-C21., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quality control of Doppler spectra from a vertically pointing, S-band profiling radar

  • Belak, Susan L.
  • Tanamachi, Robin
  • Asel, Matthew L.
  • Dennany, Grant
  • Gnanasambandam, Abhiram
  • Frasier, Steve
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This study describes a novel combination of methods to remove spurious spectral peaks, or “spurs,” from Doppler spectra produced by a vertically pointing, S-band radar. The University of Massachusetts S-band frequency-modulated, continuous-wave radar (UMass FMCW) was deployed to monitor the growth of the CBL over northern Alabama during the VORTEX–Southeast field campaign in 2016. The Doppler spectra contained spurs caused by high-voltage switching power supplies in the traveling wave tube amplifier. In the original data processing scheme for this radar, a median filtering method was used to eliminate most of the spurs, but the largest ones persisted, which significantly degraded the quality of derived radar moments (e.g., reflectivity, Doppler velocity, and spectrum width) and hindered further analysis of these data (e.g., hydrometeor classification and boundary layer height tracking). Our technique for removing the spurs consists of three steps: (i) a Laplacian filter identifies and masks peaks in the spectra that are characteristic of the spurs in shape and amplitude, (ii) an in-painting method then fills in the masked area based on surrounding data, and (iii) the moments data (e.g., reflectivity, Doppler velocity, and spectrum width) are then recomputed using a coherent power technique. This combination of techniques was more effective than the median filter at removing the largest spurs from the Doppler spectra, and preserved more of the underlying Doppler spectral structure of the scatterers. Performance of both the median-filter and the in-painting methods are assessed through statistical analysis of the spectral power differences. Downstream products, such as boundary layer height detection, are more easily derived from the recomputed moments., This work was funded by NOAA grants NA18OAR4590313 and NA19OAR4590209. Dr. Stanley H. Chan and Dr. Andrew Pazmany advised us on the in-painting and CP techniques, respectively. The statements, findings, conclusions, and recommendations are those of the authors and do not necessarily reflect the views of the NOAA or the U.S. Department of Commerce. Dr. Rocadenbosch contributed the CBL detection algorithm via project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 and EU project H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A novel geometry agnostic delay and Doppler tracking technique for GNSS-reflectometry: application to the GNOS-II payload onboard the FY-3E

  • Wang, Changyang
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Hu, Xiuqing
  • Hyuk, Park|||0000-0003-0031-0802
  • Yu, Kegen
  • Lu, Wenqiang
  • Zhai, Xiaochun
  • Huang, Feixiong
  • Liao, Mi
  • Zhang, Peng
  • Zheng, Nanshan
  • Zhang, Kefei
  • Ma, Zhongmin
Global Navigation Satellite System-Reflectometry (GNSS-R) uses GNSS signals as signals of opportunity as a multistatic radar. Most GNSS-R instruments conduct 1 ms coherent integration, followed by 500 or 1000 incoherent averages, leading to level-1 products [delay Doppler map (DDM)]. For remote sensing missions with higher spatio-temporal resolution requirements, raw data, and fewer incoherent averages are required for DDM computations. Fengyun-3E (FY-3E) GNSS Occultation Sounder II (GNOS-II) payload can acquire reflected signal's intermediate frequency (IF) raw data for specific areas, but there is no channel to record raw direct signals. Obtaining level-1 products DDM from raw data requires tracking the delay and Doppler frequency centroid coordinates, as they change during the incoherent integration time. Otherwise, the level-1 DDMs would appear blurring, which would result in wider DDMs and lower peaks. Besides, the geometry of transmitter-specular reflection point-receiver of GNOS-II is unobtainable, so classical algorithms cannot be used. Therefore, an innovative processing technique is presented, which can estimate the peak coordinates of all individual DDMs by appropriately grouping the individual DDMs and incoherently accumulating within each group. The feasibility of this method is demonstrated with representative data from sea, ice, and soil. Furthermore, incoherent averaging DDMs at a temporal resolution of 200 ms can well detect the boundary between sea, ice, and soil in high-latitude and complex environments while maintaining high quality. This work is an important basis for future analysis of the raw data from GNOS-II and will also inspire other work of individual DDM tracking where geometric information is agnostic., This work was supported in part by the National Natural Science Foundation of China under Grant 42174022, in part by the Fundamental Research Funds for the Central Universities under Grant 2023XSCX047, in part by the Postgraduate Research & Practice Innovation Program of Jiangsu Province under Grant KYCX23_2752, in part by the Graduate Innovation Program of China University of Mining and Technology under Grant 2023WLKXJ165, in part by China Scholarship Council program (Project ID: 202306420003), and in part by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC” under Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/ 501100011033 and EU EDRF “A way to make Europe”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

S-Band CCSDS compatible transmitter communications layer for CubeSats

  • Gràcia i Solà, Guillem|||0000-0002-4301-845X
  • Gonga i Siles, Amadeu
  • Pérez Portero, Adrián|||0000-0003-2736-1028
  • Contreras Benito, Luis Juan|||0000-0002-5379-4778
  • Osipova, Kseniia|||0000-0003-3473-7900
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Jallad, Abdul-Halim
The Remote sensing and Interference detector with radiomeTry and vegetation Analysis (RITA) is an Earth Observation (EO) payload developed by the Universitat Politècnica de Catalunya (UPC) NanoSat Lab, winner of the Second IEEE GRSS Student Grand Challenge, flying aboard AlainSat-1, a 3U CubeSat from the National Space Science and Technology Center (NSSTC) of the United Arab Emirates. RITA hosts three experiments: an L-band Microwave Radiometer (MWR) for soil moisture and sea ice data collection, a LoRa transceiver enabling on-demand experiment execution via ground sensors, and a Near-Infrared (NIR) Hyperspectral Camera for vegetation monitoring and water mapping. To transmit scientific data from the payload to ground stations, RITA employs an S-Band down-link compatible with Consultative Committee for Space Data Systems (CCSDS) standards, also used for AlainSat-1’s telemetry and scientific data transmission. Standard communications protocols increase mission success rates and enable interoperability between agencies and future scalability. This work presents the implementation of Processing System (PS) and Programmable Logic (PL) CCSDS compatible S-Band down-link communications for AlainSat-1., This work was supported in part by the 2nd Student Grand Challenge (SGC) of the IEEE Geoscience and Remote Sensing Society (IEEE-GRSS), and in part by the Project ‘‘GENESIS: Global Navigation Satellite Systems (GNSS) Environmental and Societal Missions—Subproject Universitat Politècnica de Catalunya (UPC)’’ funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and European Union (EU) Fondo Europeo de Desarrollo Regional (FEDER) ‘‘Una manera de hacer Europa’’ under Grant PID2021-126436OB-C21. The work of G. Gracia-Sola, A. Gonga, L. Contreras-Benito, and K. Osipova was supported by the Predoctoral Program Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR)-Formació d’Investigador (FI) Ajuts Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat de Catalunya, Spain, and European Social Plus Fund under Grant 2024 FI-1 00152, Grant 2022 FI-B 00809, Grant 2023 FI-1 00477, and Grant 2023 FI-1 00239. The work of A. Perez-Portero was supported by the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) Generalitat de Catalunya, for recruitment of early-stage research staff under Grant FISDUR2020/105., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Magnetohydrodynamic effects on radio signal propagation in a plasma flow

  • Luís, Diana Zaida Felgueiras
  • Viladegut Farran, Alan
  • Schlachter, Sonja I.
  • Dalban-Canassy, Matthieu
  • Oswald, Johannes W.
  • Herdrichd, Georg H.
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Chazot, Olivier
The plasma around a reentry spacecraft causes the charged particles to interact with the electromagnetic waves emitted by the on-board antennas, and the vehicle experiences radio communication difficulties. A proposed way to mitigate the radio blackout is the magnetic field alleviation technique that consists of superimposing a magnetic field onto the flow, converting the plasma into an anisotropic medium, and changing its refractive index. The applied magnetic field leads to the creation of an extraordinary wave that can propagate for plasma frequencies higher than the radio signal frequency. In this work, a probe containing a cryogenically-cooled high-temperature superconducting magnet is used to study the effect of an applied magnetic field on the plasma flow and on the radio signal propagation, in the VKI Plasmatron facility. The magnetized plasma is characterized by optical emission spectroscopy, stagnation heat flux, and dynamic pressure measurements. The experimental radio signal measurements are conducted using conical horn antennas, operating at frequencies in the K -band. An antenna is placed inside of the magnetic probe, transmitting toward a stagnant air plasma flow. The applied magnetic field causes an increase of the flow temperature, leading to an augmentation of the plasma frequency and stagnation heat flux, due to the Hall effect. No significant effects are observed in the signal transmission and attenuation, while the signal reflection trend is consistent with the variation of magnetic field strength, and plasma and collision frequencies. The dependency of the Faraday rotation with the magnetic field and its direction is observed. While a clear demonstration of the magnetic window is not conclusively observed in the transmission parameters, the behavior of the reflection coefficient shows that the radio blackout mitigation is feasible at optimal combinations of flow ionization., Diana Luís research is funded by a doctoral fellowship (2021.04930.BD) Granted by Fundação para a Ciência e Tecnologia (FCT Portugal). The MEESST project is funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 899298. Prof. Adriano Camps research is funded by Project GENESIS (PID 2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/5011000H033/ and EU ERDF "A way to do Europe!"., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sensitivity study of multiconstellation GNSS-R to soil moisture and surface roughness using FY-3E GNOS-II data

  • Ma, Zhongmin
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Hyuk, Park|||0000-0003-0031-0802
  • Zhang, Shuangcheng
  • Li, Xiaojun
  • Wigneron, Jean-Pierre
The potential of spaceborne Global Navigation Satellite System Reflectometry (GNSS-R) to retrieve a variety of geophysical parameters has already been demonstrated in numerous studies. In 2021, China successfully launched the Fengyun-3E (FY-3E) polar orbit satellite. It carries the GNSS Occultation Sounder-II (GNOS-II) that can simultaneously receive reflected signals from GPS, BeiDou (BDS), and Galileo (GAL) constellations. Multi-constellation measurement significantly reduces the revisit time of the spaceborne GNSS-R data. This offers the possibility to study the sensitivity of the reflected signals from multi-GNSS constellations to surface parameters at global scale. The main objective of this paper is to analyze the sensitivity of FY-3E GNOS-II surface reflectivity (SR) to soil moisture (SM), vegetation, and surface roughness for different GNSS constellations, and different incidence angles. FY-3E data from May 2023 to October 2023 was collected along with SM data from the Soil Moisture Active Passive (SMAP). The SMAP static auxiliary surface roughness parameter SMAP-h was also collected for subsequent comparisons. Furthermore, the effect of vegetation in the reflected signal was accounted for using the Soil Moisture and Ocean Salinity (SMOS) INRA-CESBIO L-band vegetation optical depth (L-VOD). Afterwards, for each GNSS constellation, the SR were binned as a function of SM, SMAP-h and incidence angle. The results indicate that the sensitivity for the different GNSS constellations is consistent, showing similar behavior. Moreover, this study also reports for the first time the experimentally-computed sensitivity of FY-3E SR to SM under different SMAP-h values. Sensitivity of GNOS-II SR to SM is in general agreement with the values in the previous studies, demonstrating the feasibility of using single-pass multi-GNSS constellation GNSS-R data to retrieve surface parameters such as SM, with shorter revisit times. Furthermore, the results of this study re-emphasize the non-linear sensitivity of SR to SM. As compared to higher SM, SR is more sensitive at lower SM. This highlights the shortcomings of using linear models to retrieve SM. Meanwhile, another important finding is that for spaceborne GNSS-R data, SMAP-h may have underestimated the effective surface roughness., This research was funded by the National Natural Science Foundation of China Projects (Grant No.42074041); Shaanxi Province Science and Technology Innovation Team (Ref. 2021TD-51); The innovation team of ShaanXi Provincial Tri-Qin Scholars with Geoscience Big Data and Geohazard Prevention (2022); and Fundamental Research Funds for the Central Universities (CHD300102263715). This research has also been partially funded by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC”, Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER “Una manera de hacer Europa”. Zhongmin Ma's work was partly supported by the China Scholarship Council (CSC) through a State Scholarship Fund (No. 202306560073)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Convolutional neural network-based onboard band selection for hyperspectral data with coarse band-to-band alignment

  • Llaveria Godoy, David|||0000-0002-4917-5798
  • Longepe, Nicolas
  • Meoni, Gabriele
  • del Prete, Roberto
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Band selection is a key strategy to address the challenges of managing large hyperspectral datasets and reduce the dimensionality problem associated with the simultaneous analysis of hundreds of spectral bands. However, the computational complexity of traditional methods makes the algorithms difficult to be deployed on board satellites. This is especially true for Small Satellites with limited computational and power resources. Moreover, existing band selection techniques often require the hypercube to be processed at least at Level-1B product, i.e., the bands need to be finely aligned before selecting them, demanding more computational resources for the on-board computer. This study presents a novel neural network-based approach for on-board band selection using data with coarse band-to-band aligned. This methodology not only simplifies the pre-processing requirements, but also opens new possibilities for efficient hyperspectral imaging from space on-board Small Satellites, such as classification, change and target detection., This project was part of the project "GENESIS: GNSS Environmental and Societal Missions – Subproject UPC", Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER “Una manera de hacer Europa”, and by a FPU fellowship from the Spanish Ministry of Education. Part of this work has also been possible thanks to the Italian Space Agency (ASI) that granted access to its PRISMA database (http://prisma.asi.it/)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing the detection of floating plastic litter with advanced remote sensing technologies in a hydrodynamic test facility

  • de Fockert, Anton
  • Eleveld, Marieke
  • Bakker, Wout
  • Felício, Joao Manuel
  • Soares da Costa, Tomás
  • Vala, Mário
  • Marques, Paulo
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Pérez Portero, Adrián|||0000-0003-2736-1028
  • Gonga i Siles, Amadeu
Remote sensing technologies have the potential to support monitoring of floating plastic litter in aquatic environments. An experimental campaign was carried out in a large-scale hydrodynamic test facility to explore the detectability of floating plastics in ocean waves, comparing and contrasting different microwave and optical remote sensing technologies. The extensive experiments revealed that detection of plastics was feasible with microwave measurement techniques using X and Ku-bands with VV polarization at a plastic threshold concentration of 1 item/m2 or 1–10 g/m2. The optical measurements further revealed that spectral and polarization properties in the visible and infrared spectrum had diagnostic information unique to the floating plastics. This assessment presents a crucial step towards enabling the detection of aquatic plastics using advanced remote sensing technologies. We demonstrate that remote sensing has the potential for global targeting of plastic litter hotspots, which is needed for supporting effective clean-up efforts and scientific evidence-based policy making., This work has been performed as part of the OSIP and Discovery programmes of the European Space Agency (ESA). We thank P. Corradi, the Technical Officer and Coordinator of the ESA Discovery Campaign on Remote Sensing of Plastic Marine Litter for this cooperation during this project. Multiple authors were funded by these programmes from different grants. UPC activities were also partially sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Peer Reviewed, Article signat per 27 autors/es: A. de Fockert 1; M. A. Eleveld 1,2; W. Bakker 1; J. M. Felício 3,4; T. S. Costa 3; M. Vala 3; P. Marques 5; N. Leonor 3,6; A. Moreira 3; J. R. Costa 3,7; R. F. S. Caldeirinha 3,6; S. A. Matos 3,7; C. A. Fernandes 3; N. Fonseca 8; M.D. Simpson 9; A. Marino 9; E. Gandini 8; A. Camps 10,11; A. Perez-Portero 10; A. Gonga 10; O. Burggraaff 12; S. P. Garaba 13; M.S. Salama 14; Q. Xiao 15; R. Calvert 2,16; T. S. van den Bremer 2,15 & P. de Maagt 8 / 1-Deltares, Delft 2600 MH, The Netherlands. 2-Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft 2628 CD, The Netherlands. 3-Instituto de Telecomunicações, Instituto Superior Técnico, Lisbon, Portugal. 4-Centro de Investigação Naval, Escola Naval, Almada, Portugal. 5-Instituto Superior de Engenharia de Lisboa, Lisbon, Portugal. 6-School of Technology and Management, Polytechnic Institute of Leiria, Leiria, Portugal. 7-Departamento de Ciências e Tecnologias da Informação, Instituto Universitário de Lisboa (ISCTE-IUL), Lisbon, Portugal. 8-Antenna and Sub-Millimeter Wave Section, European Space Agency (ESA), Noordwijk 2200 AG, The Netherlands. 9-Faculty of Natural Sciences, University of Stirling, Stirling FK9 4LA, UK. 10-Dept. Teoria del Senyal i Comunicacions, CommSensLab-UPC, Universitat Politècnica de Catalunya, and Institut d’Estudis Espacials de Catalunya/CTE-UPC, Barcelona 08034, Spain. 11-UAE University, Al Ain, Abu Dhabi, UAE. 12-Leiden Observatory and Institute of Environmental Sciences (CML), Leiden University, Leiden, The Netherlands. 13-Marine Sensor Systems Group, Institute for Chemistry and Biology of the Marine Environment, Carl von Ossietzky Universität Oldenburg, Schleusenstraße 1, 26382 Wilhelmshaven, Germany. 14-Faculty of Geo-Information Science and Earth Observation (ITC), Twente University, Enschede, The Netherlands. 15-Department of Engineering Science, University of Oxford, Oxford OX1 3PJ, UK. 16-School of Engineering, University of Edinburgh, Edinburgh EH9 3FB, Scotland, UK.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analyzing GNSS-RO derived ionospheric intensity scintillation preceding earthquakes in the Coral Sea during 2022

  • Carvajal Librado, Mireia
  • Molina Ordóñez, Carlos|||0000-0003-0300-4106
  • Boudriki Semlali, Badr Eddine|||0000-0003-0671-4808
  • Hyuk, Park|||0000-0003-0031-0802
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Lithosphere–atmosphere–ionosphere coupling models have been widely studied as potential earthquake precursors. After the earthquakes, total electron content (TEC) anomalies propagating away from the epicenter have been identified. Recent evidence has also found that electromagnetic phenomena related to earthquakes might also produce ionospheric anomalies before their occurrence. This study analyzes the correlation between ionospheric intensity scintillation, characterized by the S4 index, and seismic activity in the area around the Coral Sea in the year 2022. The S4 intensity scintillation index derived from COSMIC-2 global navigation satellite system radio occultation estimates ionospheric perturbations and identifies anomalies. The methodology involves applying rigorous filters to ensure reliable S4 estimation, including slant TEC thresholding and night-time filtering. To compare the S4 scintillation index with seismic activity, the mean and the 95th percentile of the S4 values are computed at 1-d intervals. Two case studies of earthquakes in 2022 with magnitudes larger than 6 are presented, as well as a statistical analysis based on the calculation of the confusion matrices, and the receiver operating characteristic curves. A positive correlation between the ionospheric intensity scintillation and the occurrence of earthquakes is found, with a probability of detection exceeding 35.7 % and a false alarm rate of 7.1 %, The work of B.-E. Boudriki-Semlali was supported by an FI Grant: 2021 FI_B 00471 from FIAGAUR 2021. This work was supported in part by project “GENESIS: GNSS Environmental and Societal Missions - Subproject UPC” under Grant PID2021-126436OB-C21 sponsored by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación(AEI)/10.13039/501100011033 and in part by EU FEDER “Una manera de hacer Europa”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Understanding the impact of turbulence on floating lidar measurements

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Peña Diaz, Alfredo
  • Mann, Jakob
  • Lolli, Simone
Retrieving accurate turbulence intensity from motion-corrupted floating lidar measurements is one of the main challenges of the offshore wind energy industry today. Toward overcoming this challenge, this work describes a method to retrieve the motion-corrected turbulence intensity from floating lidar measurements. The method relies on an atmospheric turbulence model combined with lidar-based flow characteristics estimates. The method simulates floating-lidar and anemometer-like measurements via synthetically-generated wind fields in turbulence boxes. We highlight the importance of accurate modeling of turbulence-box parameters to virtually eliminate motion-induced error. The proposed method was successfully tested over a 3-month campaign at IJmuiden by comparing floating-lidar turbulence measurements against those from measurements from a reference meteorological mast., This work was supported in part by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa” under Project PID2021-126436OB-C21, in part by the PRIN 2022 PNRR, in part by the Ministero dell’Università e della Ricerca under Project P20224AT3W, and in part by the European Commission Collaboration under Project H2020 ATMOACCESS (GA-101008004) and Project H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An improved neural-network to estimate the inputs of Rino's ionospheric scintillation model

  • Molina Ordóñez, Carlos|||0000-0003-0300-4106
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Ionospheric scintillation is a well-known effect that occurs when electromagnetic waves pass through the ionosphere, leading to rapid fluctuations in the phase and intensity of the received signal. In 1979 Charles Rino introduced a theory to compute the expected ionospheric scintillation. However, Rino’s model requires knowing some input variables related to the physical properties of the ionosphere’s plasma density irregularities. WBMOD model was especially developed to provide these parameters from climatological data as a function of several environmental conditions; however, the use of this model requires a license. In this study, using large datasets from past studies, a neural network has been trained to estimate the main output parameters from WBMOD: the probability density function of CkL and the value of the p-slope (slope of power spectra of phase scintillation). This allows retrieving Rino’s input variable to compute the scintillation indices S4 and sf. The resulting software, called IonoSciNN, has been published as an open web application., This work was supported in part by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC under Grant PID2021-126436OB-C21 sponsored by MCIN/AEI/10.13039/501100011033/ and in part by the IEEC INTREPID project, in which this study is contextualized., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Efficient onboard band selection algorithm for hyperspectral imagery in SmallSat missions with limited downlink capabilities

  • Llaveria Godoy, David|||0000-0002-4917-5798
  • Hyuk, Park|||0000-0003-0031-0802
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Narayan, Ram
Hyperspectral imaging is a key tool in numerous remote sensing applications. Images with tens or even hundreds of spectral bands contain a wealth of information to retrieve multiple geophysical parameters, to perform target detection, or land classification with unbeatable high accuracies. In addition, hyperspectral sensors are becoming smaller, and today they even fit in CubeSats. However, the amount of data they generate is so large that satellite communication systems have severe limitations to download it, especially in SmallSats. It is therefore becoming urgent to develop efficient automated algorithms that can be executed in the limited capabilities of the onboard computers of these satellites, so as to reduce the amount of data to be stored and downloaded, while keeping as much information as possible for a given scene. In this work a band selection algorithm has been designed to deal with this problem. The proposed algorithm consists of the sequential selection of the spectral bands ranked using the amount of information provided by each band, and also the correlation of these bands with the previously selected ones. The algorithm performance is assessed by means of a suite of classification tests with hyperspectral datasets from different sensors. Results show comparable or even better performance than other existing Band Selection algorithms, while outperforming in terms of computational complexity, which makes it more suitable for SmallSats with limited computing resources., This work was supported by the project GENESIS: GNSS Environmental and Societal Missions, grant PID2021-126436OB-C21, and by a FPU fellowship from the Spanish Ministry of Education. Part of this work has also been possible thanks to the Italian Space Agency (ASI) that granted access to its PRISMA database (http://prisma.asi.it/)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Incremental checking of SQL assertions in an RDBMS

  • Oriol Hilari, Xavier|||0000-0002-8845-8504
  • Teniente López, Ernest|||0000-0001-8890-9638
The notion of SQL assertion was introduced, in SQL-92 standard, to define general constraints over a relational database. They can be used, for instance, to specify cross-row constraints or multitable check constraints. However, up to now, none of the current relational database management systems (RDBMSs) support SQL assertions due to the difficulty of providing an efficient solution. To implement SQL assertions efficiently, the RDBMs require an incremental checking mechanism. I.e., given an assertion, the RDBMS should revalidate it only when a transaction changes data in a manner that could violate it, and only for the affected data. Some years ago, the deductive database community provided several incremental checking methods, however, their results could not get into practice in RDBMS. In this paper, we propose an approach to efficiently implement SQL assertions in an RDBMS through an incremental revalidation technique. Such an approach is compatible with any RDBMS since it is fully based on standard SQL concepts (tables, triggers, and procedures). Our proposal uses and extends the Event Rules, an existing proposal for incremental checking in deductive databases. This extension is required to handle distributive aggregates, which pushes the expressiveness of the handled SQL assertions beyond first-order constraints. Moreover, we exploit this extension to improve the treatment of constraints involving existential variables, which are a very common kind of constraints difficult and expensive to handle. Finally, we show the efficiency of our approach through some experiments, and we formally prove its soundness and completeness., This work is partially funded by the SUDOQU project, PID2021-126436OB-C21 from MCIN/AEI, 10.13039/501100011033, FEDER, UE, and the Grup de Recerca Consolidat IMP , 2021-SGR-01252., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modern ionospheric ray tracer for Earth observation satellite missions

  • Molina Ordóñez, Carlos|||0000-0003-0300-4106
  • Fernández Niño, Elena
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Electromagnetic waves propagation through the ionosphere is subject to several effects including refraction, absorption, signal delay, or Faraday rotation. A ray tracer propagator that simulates these effects is an important tool for all satellite missions relying on trans-ionospheric communications and Earth observation. This study presents an update to the 1975 Jones & Stephenson IONORT's code by implementing the use of up-to-date ionospheric, atmospheric, and geomagnetic models (IRI or NeQuick, NRLMSISE-00, IGRF), and a new 3-D model for equatorial plasma bubbles (EPBs). The developed code is part of the Ionosphere Modular Software Package (IMSP) in the context of the European Space Agency (ESA) project SIMIONO. HF radar sounders, Synthetic Aperture Radars (SAR), and GNSS Reflectometry (GNSS-R) missions constitute the main application of this software. The ray tracer has been validated with respect to the original software and by comparing real vs. simulated vertical ionograms in different locations and dates., This work was supported in part by the grant GENESIS PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021-2023 (Spain) and in part by the European Social Fund (ESF), Grant RYC-2016-2018 financed by MCIN/AEI /10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Radio wave propagation through a characterized CO2 plasma flow

  • Luís, Diana Zaida Felgueiras
  • Viladegut Farran, Alan
  • Chazot, Olivier
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
The high levels of ionization of the plasma layer created around a spacecraft during the reentry in planetary atmospheres can cause disruption of the communications, leading to a radio blackout phenomenon. The entry, descending and landing phase of a Mars mission includes degradation and complete loss of the signal for a few minutes. This work, as part of the Horizon 2020 Magnetohydrodynamics Enhanced Entry System for Space Transportation (MEESST) project, presents experimental measurements of radio signal propagation for the first time through a stagnant flow of a CO2 plasma, representative of Mars entry flows. The measurements are conducted at the VKI plasma wind tunnel, the Plasmatron facility, using conical horn antennas at the Ka-band, transmitting inside an optimally designed probe. The probe designed at VKI and its characterization at the UPC anechoic chamber are detailed. The temperature of the plasma flow is measured by means of optical emission spectroscopy, to estimate the plasma frequency and to correlate it with the experimental signal propagation results. The measurements at the plasma wind tunnel show that the signal propagates almost undisturbed for low electric powers (and plasma frequencies), being its magnitude attenuated and its polarization rotated at higher electric powers, when the electron number densities are higher., Diana Luís research is funded by a doctoral fellowship (2021.04930.BD) granted by Fundação para a Ciência e Tecnologia (FCT Portugal). The MEESST project is funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 899298. Prof. Adriano Camps research is funded by project GENESIS (PID 2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/5011000H033/ and EU ERDF “A way to do Europe!”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the correlation between earthquakes and prior ionospheric scintillations over the ocean: a study using GNSS-R data between 2017 and 2021

  • Boudriki Semlali, Badr Eddine|||0000-0003-0671-4808
  • Molina Ordóñez, Carlos|||0000-0003-0300-4106
  • Hyuk, Park|||0000-0003-0031-0802
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
From 1980 to 2021, earthquakes have caused more than 846 000 casualties and about US$ 661 billion in economic losses. At present, there are no reliable earthquake precursors to generate alerts. Currently, the link between earthquakes and total electron content variations measured by global navigation satellite systems (GNSSs) monitoring ground stations has been studied. However, GNSS ground-based monitoring stations are irregularly disseminated around the globe with significant gaps, particularly in the ocean's regions. In this article, we analyze ionospheric intensity scintillation anomalies as potential proxies of earthquakes. NASA CYGNSS GNSS-R (reflectometry) acquired by CYGNSS/delay Doppler mapping instrument from 2017 to 2021 has been used to calculate and analyze the anomalies in the S 4 parameter over ocean areas affected by earthquakes. More than 30 000 ocean earthquakes within ±40° in latitude and with a magnitude larger than M4 have been examined. The daily planetary geomagnetic index Kp was used to discard data that may be disturbed due to space weather conditions. In addition, a daily sea wind speed mask was used to eliminate sea states that impact the signal reflectivity. The standard deviation and the interquartile time series methods have been used to detect these S 4 anomalies. The confusion matrix, the receiver operating curve, and some other figures of merit have been used for the first time to evaluate and improve the performance of the prediction parameters and identify the optimum configuration to be used as a potential proxy of earthquake occurrence. As a result, a small, but detectable positive S 4 anomaly was detected between 1 and 7 days before the earthquakes under study., The work of Badr-Eddine Boudriki Semlali was supported by an FI Grant: 2021 FI_B 00471 from FI AGAUR 2021. This work was supported in part by the Grant GENESIS, PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund, Grant RYC-2016-2018 financed by MCIN/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Association of land surface temperature anomalies from GOES/ABI, MSG/SEVIRI, and Himawari-8/AHI with land earthquakes between 2010 and 2021

  • Boudriki Semlali, Badr Eddine|||0000-0003-0671-4808
  • Molina Ordóñez, Carlos|||0000-0003-0300-4106
  • Hyuk, Park|||0000-0003-0031-0802
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Every year, earthquakes cause numerous casualties and billions of dollars in economic damages, and so far, it is impossible to pre-dict them. Many researchers have studied the land surface tem-perature (LST) anomalies as promising potential earthquake precursors. In this work, more than 30,000 land earthquakes with a Magnitude (Mw) larger than 4 have been studied from 2010 to 2021. Global LST nighttime (0–6 am) data from Meteosat Second Generation (MSG), Himawari-8, and the Geostationary Operational Environmental Satellite (GOES) satellites have been used to evalu-ate the LST anomalies in the zones affected by earthquakes with spatial resolutions of 1, 2, and 4 km, respectively. The time series moving standard deviation (STD) and Interquartile (IQT) have been used to estimate the LST anomalies. The Confusion Matrix (CM), the receiver operating curve (ROC), and some other figures of merit are computed to assess the goodness of positive LST anomalies and detection thresholds as potential proxies of earth-quake occurrence. A positive LST anomaly is typically observed a few days [1–7d] before the earthquake’s occurrence, followed by a negative LST anomaly afterwards [1–3d]., This work was supported in part by the grant PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund (ESF), Grant RYC-2016-2018 financed by MCIN/AEI/10.13039/ 501100011033. Badr-Eddine Boudriki Semlali received support from an FI grant: 2021 FI_B 00471 from FI AGAUR 2021 and MCIN/AEI /10.13039/501100011033; Spanish National Plan for Scientific and Technical Research and Innovation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of a dynamically re-configurable radio-frequency interference detection system for L-Band microwave radiometers

  • Pérez Portero, Adrián|||0000-0003-2736-1028
  • Querol Borràs, Jorge|||0000-0002-8500-5534
  • Mas-Vinolas, Andreu
  • Amezaga, Adria
  • Jove-Casulleras, Roger
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Real-Time RFI Detection and Flagging (RT-RDF) for microwave radiometers is a versatile new FPGA algorithm designed to detect and flag Radio-Frequency Interference (RFI) in microwave radiometers. This block utilizes computationally-efficient techniques to identify and analyze RF signals, allowing the system to take appropriate measures to mitigate interference and maintain reliable performance. With L-Band microwave radiometry as the main application, this RFI detection algorithm focuses on the Kurtogram and Spectrogram to detect non-Gaussian behavior. To gain further modularity, an FFT-based filter bank is used to divide the receiver’s bandwidth into several sub-bands within the band of interest of the instrument, depending on the application. Multiple blanking strategies can then be applied in each band using the provided detection flags. The algorithm can be re-configured in the field, for example with dynamic integration times to support operation in different environments, or configurable thresholds to account for variable RFI environments. A validation and testing campaign has been performed on multiple scenarios with the ARIEL commercial microwave radiometer, and the results confirm the excellent performance of the system., This research was funded by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC (PID2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and Adrian Perez-Portero (FISDUR2020/105) was supported by a grant for recruitment of early-stage research staff of the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR)—Generalitat de Catalunya, Spain., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The 3Cat-4 spacecraft thermal analysis and thermal vacuum test campaign results

  • Buitrago Leiva, Jeimmy Nataly
  • Terraza Palanca, Ines
  • Contreras Benito, Luis Juan
  • Fernández Capón, Lara Pilar
  • Gràcia i Solà, Guillem
  • del Castillo Sancho, Cristina
  • Ha, Lily
  • Palma, David
  • Solyga, Malgorzata
  • Camps Carmona, Adriano José
3Cat-4 is the fourth member of the CubeSat series of UPC’s NanoSat Lab, and it was selected by the ESA Academy’s Fly Your Satellite! program in 2017. This mission aims at demonstrating the capabilities of nano-satellites, and in particular those based in the 1-Unit CubeSat standard, for challenging Earth Observation (EO) using Global Navigation Satellite System-Reflectometry (GNSS-R) and L-band microwave radiometry, as well as for Automatic Identification Systems (AIS). The following study presents the results of the thermal analysis carried out for this mission, evaluating different scenarios, including the most critical cases at both high and low temperatures. The results consider different albedos and orbital parameters in order to establish the optimal temperatures to achieve the best mission performance within the nominal temperatures, and in all operational modes of the satellite. Simulation results are included considering the thermal performance of other materials, such as Kapton, as well as the redesign of the optical properties of the satellite’s solar panels. The correlation with the thermal model and the TVAC test campaign was conducted at the ESA ESEC-GALAXIA facilities in Belgium., This research was funded by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Operational and regulatory assessment for satellites recycling

  • Buitrago Leiva, Jeimmy Nataly
  • El Khayati Ramouz, Mohamed
  • Camps Carmona, Adriano José
  • Ruiz De Azúa Ortega, Juan Adrián
Recycling abandoned or partially failed satellites, also known as zombie satellites (ZSs), is an emerging concept that can significantly reduce the number of satellites to be launched, and ultimately the amount of space junk. By assessing and leveraging the remaining capabilities of those satellites, they can be repurposed for missions different from the initial one. This work conducts an operability assessment of satellite recycling by exploiting their remaining subsystems and equipment for telecommunications and Earth Observation applications. Additionally, the international and national regulatory frameworks relevant to the legal repurposing of satellites are examined and discussed in this paper. Finally, to incorporate recycling considerations into satellite design, various standardization approaches are discussed for future satellite missions., This work was sponsored by the project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Radio wave propagation through a characterized CO2 plasma flow

  • Luís, Diana Zaida Felgueiras
  • Viladegut Farran, Alan
  • Chazot, Olivier
  • Camps Carmona, Adriano José
The high levels of ionization of the plasma layer created around a spacecraft during the reentry in planetary atmospheres can cause disruption of the communications, leading to a radio blackout phenomenon. The entry, descending and landing phase of a Mars mission includes degradation and complete loss of the signal for a few minutes. This work, as part of the Horizon 2020 Magnetohydrodynamics Enhanced Entry System for Space Transportation (MEESST) project, presents experimental measurements of radio signal propagation for the first time through a stagnant flow of a CO2 plasma, representative of Mars entry flows. The measurements are conducted at the VKI plasma wind tunnel, the Plasmatron facility, using conical horn antennas at the Ka-band, transmitting inside an optimally designed probe. The probe designed at VKI and its characterization at the UPC anechoic chamber are detailed. The temperature of the plasma flow is measured by means of optical emission spectroscopy, to estimate the plasma frequency and to correlate it with the experimental signal propagation results. The measurements at the plasma wind tunnel show that the signal propagates almost undisturbed for low electric powers (and plasma frequencies), being its magnitude attenuated and its polarization rotated at higher electric powers, when the electron number densities are higher., Diana Luís research is funded by a doctoral fellowship (2021.04930.BD) granted by Fundação para a Ciência e Tecnologia (FCT Portugal). The MEESST project is funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 899298. Prof. Adriano Camps research is funded by project GENESIS (PID 2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/5011000H033/ and EU ERDF “A way to do Europe!”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the correlation between earthquakes and prior ionospheric scintillations over the ocean: a study using GNSS-R data between 2017 and 2021

  • Boudriki Semlali, Badr Eddine
  • Molina Ordóñez, Carlos
  • Hyuk, Park
  • Camps Carmona, Adriano José
From 1980 to 2021, earthquakes have caused more than 846 000 casualties and about US$ 661 billion in economic losses. At present, there are no reliable earthquake precursors to generate alerts. Currently, the link between earthquakes and total electron content variations measured by global navigation satellite systems (GNSSs) monitoring ground stations has been studied. However, GNSS ground-based monitoring stations are irregularly disseminated around the globe with significant gaps, particularly in the ocean's regions. In this article, we analyze ionospheric intensity scintillation anomalies as potential proxies of earthquakes. NASA CYGNSS GNSS-R (reflectometry) acquired by CYGNSS/delay Doppler mapping instrument from 2017 to 2021 has been used to calculate and analyze the anomalies in the S 4 parameter over ocean areas affected by earthquakes. More than 30 000 ocean earthquakes within ±40° in latitude and with a magnitude larger than M4 have been examined. The daily planetary geomagnetic index Kp was used to discard data that may be disturbed due to space weather conditions. In addition, a daily sea wind speed mask was used to eliminate sea states that impact the signal reflectivity. The standard deviation and the interquartile time series methods have been used to detect these S 4 anomalies. The confusion matrix, the receiver operating curve, and some other figures of merit have been used for the first time to evaluate and improve the performance of the prediction parameters and identify the optimum configuration to be used as a potential proxy of earthquake occurrence. As a result, a small, but detectable positive S 4 anomaly was detected between 1 and 7 days before the earthquakes under study., The work of Badr-Eddine Boudriki Semlali was supported by an FI Grant: 2021 FI_B 00471 from FI AGAUR 2021. This work was supported in part by the Grant GENESIS, PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund, Grant RYC-2016-2018 financed by MCIN/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards a second life for Zombie Satellites: Anomaly occurrence and potential recycling assessment

  • Buitrago Leiva, Jeimmy Nataly
  • El Khayati Ramouz, Mohamed
  • Camps Carmona, Adriano José
  • Ruiz De Azúa Ortega, Juan Adrián
This document is the partial result of an ongoing satellite research activity carried out by Universitat Politècnica de Catalunya NanoSat Lab and i2CAT Foundation, submitted to the Horizon Europe Program in 2022., Thousands of rockets, spaceships, and satellites have been launched, resulting in a steady increase in the number of space debris notably in Low Earth Orbit (LEO) and Geostationary Orbit (GEO). Among the objects comprising space debris, defunct satellites are commonly found, which may have been abandoned in space due to various anomalies. While these satellite failures may not be catastrophic, certain subsystems could still be repurposed for alternative uses beyond their initial design. This study aims to assess the feasibility of “recycling” partially failed satellites, also known as “Zombie Satellites”, by statistically evaluating the severity of their anomalies and quantifying their remaining capabilities and limitations. By conducting a comprehensive statistical analysis, the anomalies have been categorized based on subsystem, orbit type, occurrence date during the satellite’s lifespan, and severity. Additionally, an analysis is presented to identify failed satellites from some of the current large constellations., This work was sponsored in part by the I+D+i project of UPC GENESIS project PID 2021-1264360B-C21 financed by MCIN/AEI. Additionally, this work was supported by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union–NextGeneration EU , in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-8-6GSatNet-SeS)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Critical infrastructure awareness based on IoT context data

  • Vila Gómez, Marc
  • Sancho Samsó, María Ribera
  • Teniente López, Ernest
  • Vilajosana Guillén, Xavier
The Internet of Things (IoT) represents a powerful new paradigm for connecting and communicating with the world around us. It has the potential to transform the way we live, work, and interact with our surroundings. IoT devices are transmitting information over the Internet, most of them with different data formats, despite they may be communicating similar concepts. This often leads to data incompatibilities and makes it difficult to extract the knowledge underlying that data. Because of the heterogeneity of IoT devices and data, interoperability is a challenge, and efforts are underway to overcome this through research and standardization. While data collection and monitoring in IoT systems are becoming more prevalent, contextualizing the data and taking appropriate actions to address issues in the monitored environment is still an ongoing concern. Context Awareness is a highly relevant topic in IoT, as it aims to provide a deeper understanding of the data collected and enable more informed decision-making. In this paper, we propose a semantic ontology designed to monitor global entities in the IoT. By leveraging semantic definitions, it enables end-users to model the entire process from detection to action, including context-aware rules for taking appropriate actions. The advantages of using semantic definitions include more accurate and consistent data interpretation, which improves the overall monitoring process and enables more effective decision-making based on the collected insights. Our proposal includes semantic models for defining the entities responsible for monitoring and executing actions, as well as the elements that need to be considered for an effective monitoring process. Additionally, we provide a new definition for the components known as gateways, which enable the connection and communication between devices and the Internet. Finally, we show the benefits of our ontology by applying it to a critical infrastructure domain where a rapid response is vital to prevent accidents and malfunction of the entities., This work is partially funded by Industrial Doctorates from Generalitat de Catalunya (2019 DI 001), the SUDOQU project, PID2021-126436OB-C21 from MCIN/AEI, 10.13039/501100011033, FEDER, UE, and the Grup de Recerca Consolidat IMP, 2021 SGR-01252., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity of delay Doppler map in spaceborne GNSS-R to geophysical variables of the ocean

  • Camps Carmona, Adriano José
  • Hyuk, Park
Global Navigation Satellite Systems reflectometry (GNSS-R) is a particular case of a multistatic radar in which the signals transmitted by navigation satellites are the signals of opportunity. These signals can be processed as a radar scatterometer, as a radar altimeter, or as an unfocused synthetic aperture radar. GNSS-R has shown its potential to infer numerous geophysical variables: over land soil moisture, vegetation height, detection of freeze-thaw state, etc., map sea ice extent and type…, and over the ocean wind speed and direction, significant wave height, altimetric measurements or even more recently NASA has released a marine plastics litter product, and some also claim that sea surface salinity (SSS) can be inferred. In addition, retrieval algorithms neglect some of the variations of the delay Doppler map (DDM) that are linked to the observation geometry, i.e., look angle with respect to the speed vectors of the transmitter and receiver. All these different effects impact the DDM peak value and its shape, and may affect the retrieval of geophysical parameters, and ultimately the data interpretation. In this study, the following factors impacting the DDM peak value are studied: the observation geometry, the sea surface temperature, and SSS, the 10 m height wind speed (U 10 ) and direction (WD), the presence of foam, the sea development state, the presence of swell, currents, rain, and the presence of oil slicks perturbing the sea surface roughness. This illustrates the complexity of the challenges presented when trying to retrieve some of these variables, the required corrections, and their accuracy., This work was supported in part by the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021-2023 (Spain) under Grant PID2021-126436OB-C21, in part by the European Social Fund, and in part by the GENESIS: GNSS Environmental and Societal Missions – Subproject UPC under Grant PID2021-126436OB-C21., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

RF-Assisted compensation for rapid optical acquisition in hybrid inter-satellite links

  • Fernández Niño, Elena
  • Fraire, Juan A.
  • Camps Carmona, Adriano José
  • Ruiz De Azúa Ortega, Juan Adrián
Establishing Optical Inter-Satellite Links (O-ISLs) requires sub-degree pointing accuracy between fast-moving satellites, a challenge resulting from actuator limitations and positioning uncertainties. This work proposes a novel pointing strategy for Hybrid Inter-Satellite Links (H-ISLs), i.e. combining Radio-Frequency (RF) and Optical technologies, to maximize usable contact time. The strategy leverages TLE-based pre-pointing executed before the line-of-sight contact to eliminate the actuator-induced transient regime from the contact window. Once the RF-ISL is established, satellites exchange updated GNSS data to refine pointing accuracy which narrows the initial optical uncertainty cone. This shortens the optical spatial-acquisition time and increases the effective transmission time of the O-ISL. The approach is evaluated through simulations incorporating actuator dynamics and degraded TLE updates. Results show that the transient pointing error is reduced from 167° to less than 2.5°, effective optical transmission time increases from 72% to over 99%, and memory buffering requirements drop more than 98%. This work demonstrates the feasibility and performance benefits of RF-assisted pre-pointing in smallsats O-ISLs., This work was supported and funded by the by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021- 5-6GSatNet-SS), and by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia. Additionally, this work has also been partially funded by the Ministry of Science and Innovation MICIN/Agencia Estatal de Investigación AEI/10.13039/501100811033, the Spanish MCIU/AEI/10.13039/501100011033/FEDER/UE through project PID2023-146378NB-I00, and EU Feder through the project “GENESIS: GNSS Environmental and Societal missions” grant PID 2021-126436OB-C21. This research was also financed in part by the French National Research Agency (ANR) under the project ANR-22-CE25-0014-01, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Novel magnetic attitude control system for SmallSats with low-thrust propulsion systems

  • Santin Blanco, Oscar
  • Biel Simon, Adrià
  • Navarro Simoni, Pol Eduard
  • Contreras Benito, Luis Juan
  • Buitrago Leiva, Jeimmy Nataly
  • Climent Salazar, Pau
  • Liaño de la Fuente, Emilio
  • Camps Carmona, Adriano José
  • Di Pasquale, Giuseppe
  • Wijnen, Mick
  • Pérez Grande, Daniel
This work presents a linear magnetic attitude control algorithm for a six-unit CubeSat, with a low-thrust electrical propulsion system for orbital raising, and assesses the performance of the control system. During the orbital raising maneuver, the Attitude Determination and Control Subsystem (ADCS) will be in Thrust Vector Pointing (TVP) mode, aligning the thrust vector with the orbital velocity vector. The study determines the minimum magnetic attitude control capabilities needed to maintain the desired orientation during continuous thrust operations in low Earth orbit. The results demonstrate that a properly sized magnetic attitude control system can achieve pointing accuracies of 3.2° (3s) while consuming only 0.42 W and maintaining 86% reduction in thruster-induced errors - significantly outperforming conventional B-dot controllers (40% reduction) while requiring substantially less mass than reaction wheel systems (0.32 kg vs 0.9-1.2 kg). Through simulations incorporating realistic environmental disturbances and thrust-induced torques, performance maps are developed that establish the relationship between thruster position, thrust magnitude, and required control authority. The innovative contribution of this work is the development and validation of a practical, mass-efficient control solution specifically optimized for low-thrust CubeSat applications, demonstrated through numerical simulations that incorporate detailed hardware characteristics and environmental models. The results enable mission designers to properly size attitude control systems for CubeSats with electric propulsion, ensuring reliable operation while minimizing system mass and power requirements. This study presents: 1. The description of the algorithms used to model the satellite, the thruster, and the actuators; 2. The analysis and configuration of the TVP mode; 3. The performance assessment of the system obtained from the simulation's environment. Without loss of generality, these results can be applied to other CubeSat missions including thrusters., This work was sponsored in part by the I+D+i project of UPC GENESIS project PID 2021-1264360B-C21 financed by MCIN/AEI, and also supported through the collaboration efforts of IENAI SPACE for the ongoing satellite mission 3Cat-8., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Preliminary design of satellite systems through the integration of model-based system engineering and Agile methodologies: application to the 3ColStar Mission

  • Buitrago Leiva, Jeimmy Nataly
  • Mejía González, Juan José
  • Puerta Ibarra, Juan Francisco
  • Acero Niño, Ignacio Francisco
  • Guarnizo Saavedra, Andrés Felipe
  • Rodríguez Ferreira, Julián
  • Rojas Rodríguez, Leandro
  • Hernández Torres, Francisco Luis
  • Arango Cotacio, Cristian Esteban
  • Salazar Morales, Jorge Enrique
  • Herrera Cruz, Miguel Angel
  • Linares Vásquez, Mario
  • Jiménez Vargas, Jose Fernando
  • Espíndola Díaz, Jorge Enrique
  • Montañez Sogamoso, Óscar Javier
  • Camps Carmona, Adriano José
This paper presents a case study on integrating Agile Systems Engineering methodologies in the preliminary design phase of satellite systems, focusing on the 3ColStar satellite mission. Through Model-Based Systems Engineering (MBSE), technical consistency was rigorously managed across various architectural documents, ensuring coherency and minimizing errors. Furthermore, the preliminary design was developed, with the implementation of the Arcadia Method, supported by the Capella modeling tool. This allowed the digitalization of the system, which was represented by models that contain requirements, architecture, and interfaces between the different parts of the system. At the same time, the preliminary design process was streamlined and completed within an accelerated time frame of 4 months, with weekly sprints driving progress based on the scrum methodology. This case study highlights the effectiveness of Agile Systems Engineering principles to improve the team communication accuracy, communication, and efficiency of satellite systems preliminary design, providing valuable insights for future missions., This work was sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21; MCIN/AEI/10.13039/501100011033/; EU ERDF “A way to do Europe”; and the research and public 2024 grant from Universidad de los Andes., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing the detection of floating plastic litter with advanced remote sensing technologies in a hydrodynamic test facility

  • de Fockert, Anton
  • Eleveld, Marieke
  • Bakker, Wout
  • Felício, Joao Manuel
  • Soares da Costa, Tomás
  • Vala, Mário
  • Marques, Paulo
  • Camps Carmona, Adriano José
  • Pérez Portero, Adrián
  • Gonga i Siles, Amadeu
Remote sensing technologies have the potential to support monitoring of floating plastic litter in aquatic environments. An experimental campaign was carried out in a large-scale hydrodynamic test facility to explore the detectability of floating plastics in ocean waves, comparing and contrasting different microwave and optical remote sensing technologies. The extensive experiments revealed that detection of plastics was feasible with microwave measurement techniques using X and Ku-bands with VV polarization at a plastic threshold concentration of 1 item/m2 or 1–10 g/m2. The optical measurements further revealed that spectral and polarization properties in the visible and infrared spectrum had diagnostic information unique to the floating plastics. This assessment presents a crucial step towards enabling the detection of aquatic plastics using advanced remote sensing technologies. We demonstrate that remote sensing has the potential for global targeting of plastic litter hotspots, which is needed for supporting effective clean-up efforts and scientific evidence-based policy making., This work has been performed as part of the OSIP and Discovery programmes of the European Space Agency (ESA). We thank P. Corradi, the Technical Officer and Coordinator of the ESA Discovery Campaign on Remote Sensing of Plastic Marine Litter for this cooperation during this project. Multiple authors were funded by these programmes from different grants. UPC activities were also partially sponsored by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”., Peer Reviewed, Article signat per 27 autors/es: A. de Fockert 1; M. A. Eleveld 1,2; W. Bakker 1; J. M. Felício 3,4; T. S. Costa 3; M. Vala 3; P. Marques 5; N. Leonor 3,6; A. Moreira 3; J. R. Costa 3,7; R. F. S. Caldeirinha 3,6; S. A. Matos 3,7; C. A. Fernandes 3; N. Fonseca 8; M.D. Simpson 9; A. Marino 9; E. Gandini 8; A. Camps 10,11; A. Perez-Portero 10; A. Gonga 10; O. Burggraaff 12; S. P. Garaba 13; M.S. Salama 14; Q. Xiao 15; R. Calvert 2,16; T. S. van den Bremer 2,15 & P. de Maagt 8 / 1-Deltares, Delft 2600 MH, The Netherlands. 2-Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft 2628 CD, The Netherlands. 3-Instituto de Telecomunicações, Instituto Superior Técnico, Lisbon, Portugal. 4-Centro de Investigação Naval, Escola Naval, Almada, Portugal. 5-Instituto Superior de Engenharia de Lisboa, Lisbon, Portugal. 6-School of Technology and Management, Polytechnic Institute of Leiria, Leiria, Portugal. 7-Departamento de Ciências e Tecnologias da Informação, Instituto Universitário de Lisboa (ISCTE-IUL), Lisbon, Portugal. 8-Antenna and Sub-Millimeter Wave Section, European Space Agency (ESA), Noordwijk 2200 AG, The Netherlands. 9-Faculty of Natural Sciences, University of Stirling, Stirling FK9 4LA, UK. 10-Dept. Teoria del Senyal i Comunicacions, CommSensLab-UPC, Universitat Politècnica de Catalunya, and Institut d’Estudis Espacials de Catalunya/CTE-UPC, Barcelona 08034, Spain. 11-UAE University, Al Ain, Abu Dhabi, UAE. 12-Leiden Observatory and Institute of Environmental Sciences (CML), Leiden University, Leiden, The Netherlands. 13-Marine Sensor Systems Group, Institute for Chemistry and Biology of the Marine Environment, Carl von Ossietzky Universität Oldenburg, Schleusenstraße 1, 26382 Wilhelmshaven, Germany. 14-Faculty of Geo-Information Science and Earth Observation (ITC), Twente University, Enschede, The Netherlands. 15-Department of Engineering Science, University of Oxford, Oxford OX1 3PJ, UK. 16-School of Engineering, University of Edinburgh, Edinburgh EH9 3FB, Scotland, UK., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The 2021 la Palma volcanic eruption and its impact on ionospheric scintillation as measured from GNSS reference stations, GNSS-R and GNSS-RO

  • Molina Ordóñez, Carlos
  • Boudriki Semlali, Badr Eddine
  • González Casado, Guillermo
  • Hyuk, Park
  • Camps Carmona, Adriano José
Ionospheric disturbances induced by seismic activity have been studied in recent years by many authors, showing an impact both before and after the occurrence of earthquakes. In this study, the ionospheric scintillation produced by the 2021 La Palma volcano eruption is analyzed. The Cumbre Vieja volcano was active from 19 September to 13 December 2021, and many earthquakes of magnitude 3–4 were recorded, with some of them reaching magnitude 5. Three methods, GNSS reference monitoring, GNSS reflectometry (GNSS-R) from NASA CYGNSS, and GNSS radio occultation (GNSS-RO) from COSMIC and Spire constellations, are used to compare and evaluate their sensitivity as proxies of earthquakes associated with the volcanic eruption. To compare the seismic activity with ionospheric scintillation, seismic energy release, and 95th percentile of the intensity scintillation parameter (S4), measurements have been computed at 6 h intervals for the whole duration of the volcanic eruption. GNSS-RO has shown the best correlation between earthquake energy and S4, with values up to 0.09 when the perturbations occur around 18 h after the seismic activity. GNSS reference monitoring station data also show some correlation 18 h and 7–8 d after. As expected, GNSS-R is the one that shows the smallest correlation, as the ionospheric signatures get masked by the signature of the surface where the reflection is taking place. Additionally, the three methods show a smaller correlation during the week before earthquakes. Given the small magnitude of the seismic activity, the correlation is barely detectable in this situation, and thus would be difficult to use in any application to find earthquake proxies., This research was supported in part by grant PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund (ESF). GNSS-RO Spire data have been provided by the European Space Agency through the ESA TPM SPIRE project ID 67176., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Association of land surface temperature anomalies from GOES/ABI, MSG/SEVIRI, and Himawari-8/AHI with land earthquakes between 2010 and 2021

  • Boudriki Semlali, Badr Eddine
  • Molina Ordóñez, Carlos
  • Hyuk, Park
  • Camps Carmona, Adriano José
Every year, earthquakes cause numerous casualties and billions of dollars in economic damages, and so far, it is impossible to pre-dict them. Many researchers have studied the land surface tem-perature (LST) anomalies as promising potential earthquake precursors. In this work, more than 30,000 land earthquakes with a Magnitude (Mw) larger than 4 have been studied from 2010 to 2021. Global LST nighttime (0–6 am) data from Meteosat Second Generation (MSG), Himawari-8, and the Geostationary Operational Environmental Satellite (GOES) satellites have been used to evalu-ate the LST anomalies in the zones affected by earthquakes with spatial resolutions of 1, 2, and 4 km, respectively. The time series moving standard deviation (STD) and Interquartile (IQT) have been used to estimate the LST anomalies. The Confusion Matrix (CM), the receiver operating curve (ROC), and some other figures of merit are computed to assess the goodness of positive LST anomalies and detection thresholds as potential proxies of earth-quake occurrence. A positive LST anomaly is typically observed a few days [1–7d] before the earthquake’s occurrence, followed by a negative LST anomaly afterwards [1–3d]., This work was supported in part by the grant PID2021-126436OB-C21 from the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021–2023 (Spain) and in part by the European Social Fund (ESF), Grant RYC-2016-2018 financed by MCIN/AEI/10.13039/ 501100011033. Badr-Eddine Boudriki Semlali received support from an FI grant: 2021 FI_B 00471 from FI AGAUR 2021 and MCIN/AEI /10.13039/501100011033; Spanish National Plan for Scientific and Technical Research and Innovation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A novel geometry agnostic delay and Doppler tracking technique for GNSS-reflectometry: application to the GNOS-II payload onboard the FY-3E

  • Wang, Changyang
  • Camps Carmona, Adriano José
  • Hu, Xiuqing
  • Hyuk, Park
  • Yu, Kegen
  • Lu, Wenqiang
  • Zhai, Xiaochun
  • Huang, Feixiong
  • Liao, Mi
  • Zhang, Peng
  • Zheng, Nanshan
  • Zhang, Kefei
  • Ma, Zhongmin
Global Navigation Satellite System-Reflectometry (GNSS-R) uses GNSS signals as signals of opportunity as a multistatic radar. Most GNSS-R instruments conduct 1 ms coherent integration, followed by 500 or 1000 incoherent averages, leading to level-1 products [delay Doppler map (DDM)]. For remote sensing missions with higher spatio-temporal resolution requirements, raw data, and fewer incoherent averages are required for DDM computations. Fengyun-3E (FY-3E) GNSS Occultation Sounder II (GNOS-II) payload can acquire reflected signal's intermediate frequency (IF) raw data for specific areas, but there is no channel to record raw direct signals. Obtaining level-1 products DDM from raw data requires tracking the delay and Doppler frequency centroid coordinates, as they change during the incoherent integration time. Otherwise, the level-1 DDMs would appear blurring, which would result in wider DDMs and lower peaks. Besides, the geometry of transmitter-specular reflection point-receiver of GNOS-II is unobtainable, so classical algorithms cannot be used. Therefore, an innovative processing technique is presented, which can estimate the peak coordinates of all individual DDMs by appropriately grouping the individual DDMs and incoherently accumulating within each group. The feasibility of this method is demonstrated with representative data from sea, ice, and soil. Furthermore, incoherent averaging DDMs at a temporal resolution of 200 ms can well detect the boundary between sea, ice, and soil in high-latitude and complex environments while maintaining high quality. This work is an important basis for future analysis of the raw data from GNOS-II and will also inspire other work of individual DDM tracking where geometric information is agnostic., This work was supported in part by the National Natural Science Foundation of China under Grant 42174022, in part by the Fundamental Research Funds for the Central Universities under Grant 2023XSCX047, in part by the Postgraduate Research & Practice Innovation Program of Jiangsu Province under Grant KYCX23_2752, in part by the Graduate Innovation Program of China University of Mining and Technology under Grant 2023WLKXJ165, in part by China Scholarship Council program (Project ID: 202306420003), and in part by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC” under Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/ 501100011033 and EU EDRF “A way to make Europe”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Architecting CubeSat constellations for messaging service, Part I

  • Osipova, Kseniia
  • Camps Carmona, Adriano José
  • Golkar, Alessandro
  • Ruiz de Azua, Joan Adria
  • Fernández Capón, Lara Pilar
  • Garzaniti, Nicola
In today’s modern and globalized world, connectivity is a key factor for businesses, production facilities, sensor networks, and ordinary people. However, there are still populated areas which are not covered by ground-based telecommunications infrastructure. This is where telecommunication satellite constellations come in, as they can provide coverage to remote and uninhabited regions and fill existing connectivity gaps to ensure data transfer. LoRa is one of the technologies designed for data transmissions over long distances with low power consumption. Alongside with other technologies of the Low-Power Wide Area Network family, it is widely used for Internet of Things applications. LoRa chirp spread spectrum modulation is robust against the Doppler frequency shifts encountered in low earth orbits, and it has already been used in IoT satellite communications. Due to the low transmitted signal power, the achieved data rate is not high, making it a suitable technology for telecommunications payloads on CubeSat platforms for messaging services. As compared to existing traditional communication satellite systems, CubeSat constellations are low-cost and may offer an affordable connectivity service to developing regions. This study is divided in two parts. In Part I the demand model is built based on the population distribution not covered by cell towers. The LoRa link performance is analyzed, considering the impact of LoRa channel parameters variation, such as spreading factor and channel bandwidth, while satellite orbital height, transmission antenna beamwidth, and transmitter peak power have a direct impact on the payload mass. Among thousands of possible configurations, 73 feasible payload designs have been downselected. In Part II of the study, the satellite mass and the total system cost are estimated based on the payload parameters obtained. Messages transmission simulation via a constellation is conducted in order to identify optimal constellation architectures for messaging service, as well as the main drivers of the system economic profitability. The presented analysis results provide a deeper understanding of LoRa connectivity advantages and limitations together with the performance drivers, which will support the optimization of future LoRa-based satellite communication systems and other IoT satellite constellations., This has been supported by the predoctoral program AGAUR-FI ajuts (2023 FI-1 00477) Joan Oró of the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat of Catalonia and the European Social Plus Fund. This project was also sponsored in part by the project ‘‘GENESIS: GNSS Environmental and Societal Missions – Subproject UPC’’, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”. This study would also not have been possible without the support of the Skolkovo Institute of Science and Technology, whose funding enabled the international collaboration through its Academic Mobility program. During the preparation of this work the authors used ChatGPT [75] in order to improve language and readability. After using this tool, the authors reviewed and edited the content as needed, and take full responsibility for the content of the publication., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Incremental checking of SQL assertions in an RDBMS

  • Oriol Hilari, Xavier
  • Teniente López, Ernest
The notion of SQL assertion was introduced, in SQL-92 standard, to define general constraints over a relational database. They can be used, for instance, to specify cross-row constraints or multitable check constraints. However, up to now, none of the current relational database management systems (RDBMSs) support SQL assertions due to the difficulty of providing an efficient solution. To implement SQL assertions efficiently, the RDBMs require an incremental checking mechanism. I.e., given an assertion, the RDBMS should revalidate it only when a transaction changes data in a manner that could violate it, and only for the affected data. Some years ago, the deductive database community provided several incremental checking methods, however, their results could not get into practice in RDBMS. In this paper, we propose an approach to efficiently implement SQL assertions in an RDBMS through an incremental revalidation technique. Such an approach is compatible with any RDBMS since it is fully based on standard SQL concepts (tables, triggers, and procedures). Our proposal uses and extends the Event Rules, an existing proposal for incremental checking in deductive databases. This extension is required to handle distributive aggregates, which pushes the expressiveness of the handled SQL assertions beyond first-order constraints. Moreover, we exploit this extension to improve the treatment of constraints involving existential variables, which are a very common kind of constraints difficult and expensive to handle. Finally, we show the efficiency of our approach through some experiments, and we formally prove its soundness and completeness., This work is partially funded by the SUDOQU project, PID2021-126436OB-C21 from MCIN/AEI, 10.13039/501100011033, FEDER, UE, and the Grup de Recerca Consolidat IMP , 2021-SGR-01252., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An improved neural-network to estimate the inputs of Rino's ionospheric scintillation model

  • Molina Ordóñez, Carlos
  • Camps Carmona, Adriano José
Ionospheric scintillation is a well-known effect that occurs when electromagnetic waves pass through the ionosphere, leading to rapid fluctuations in the phase and intensity of the received signal. In 1979 Charles Rino introduced a theory to compute the expected ionospheric scintillation. However, Rino’s model requires knowing some input variables related to the physical properties of the ionosphere’s plasma density irregularities. WBMOD model was especially developed to provide these parameters from climatological data as a function of several environmental conditions; however, the use of this model requires a license. In this study, using large datasets from past studies, a neural network has been trained to estimate the main output parameters from WBMOD: the probability density function of CkL and the value of the p-slope (slope of power spectra of phase scintillation). This allows retrieving Rino’s input variable to compute the scintillation indices S4 and sf. The resulting software, called IonoSciNN, has been published as an open web application., This work was supported in part by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC under Grant PID2021-126436OB-C21 sponsored by MCIN/AEI/10.13039/501100011033/ and in part by the IEEC INTREPID project, in which this study is contextualized., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Convolutional neural network-based onboard band selection for hyperspectral data with coarse band-to-band alignment

  • Llaveria Godoy, David
  • Longepe, Nicolas
  • Meoni, Gabriele
  • del Prete, Roberto
  • Camps Carmona, Adriano José
Band selection is a key strategy to address the challenges of managing large hyperspectral datasets and reduce the dimensionality problem associated with the simultaneous analysis of hundreds of spectral bands. However, the computational complexity of traditional methods makes the algorithms difficult to be deployed on board satellites. This is especially true for Small Satellites with limited computational and power resources. Moreover, existing band selection techniques often require the hypercube to be processed at least at Level-1B product, i.e., the bands need to be finely aligned before selecting them, demanding more computational resources for the on-board computer. This study presents a novel neural network-based approach for on-board band selection using data with coarse band-to-band aligned. This methodology not only simplifies the pre-processing requirements, but also opens new possibilities for efficient hyperspectral imaging from space on-board Small Satellites, such as classification, change and target detection., This project was part of the project "GENESIS: GNSS Environmental and Societal Missions – Subproject UPC", Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER “Una manera de hacer Europa”, and by a FPU fellowship from the Spanish Ministry of Education. Part of this work has also been possible thanks to the Italian Space Agency (ASI) that granted access to its PRISMA database (http://prisma.asi.it/)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

RF-assisted uncertainty cone reduction in free-space optical inter-satellite links

  • Fernández Niño, Elena
  • Fraire, Juan A.
  • Camps Carmona, Adriano José
  • Ruiz de Azua, Joan Adria
One of the space communications industry’s current focuses is developing high-throughput communication terminals for satellite-to-satellite communication links. Optical inter-satellite links provide high data rates, long-range, and robustness against interferences, and they do not require frequency licensing as radiofrequency communication systems. Nevertheless, as the uncertain location of the receiver is comprised in an area larger than that illuminated by the transmitting laser, the pointing accuracy is a critical element in the success of the optical link establishment and maintenance, requiring a pointing, acquisition, and tracking mechanism. The acquisition process is the most time-consuming of the pointing processes, limiting the time available to send data, especially in highly dynamic networks. This paper focuses on reducing the acquisition time by reducing the initial satellite position uncertainty. To this end, a hybrid system that combines RF and optical technologies in a single communication module is proposed. Whereas the control plane is managed via the RF link to exchange more precise global navigation data, the optical link corresponds to the data plane in which payload data is exchanged. The pointing between two satellites is simulated to analyze its behavior, considering the error of cumulative orbital propagation data and global navigation satellite system data. This work also analyzes the cumulative error produced by the propagation of the TLEs over time. Finally, the results show how a system that relies on the exchange of global navigation satellite system positioning data achieves up to 99.45% better-pointing accuracy than a system that bases positioning data on TLE propagation., This work was supported in part by the by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union—NextGeneration EU, in the Framework of the Recovery Plan, Transformation and Resilience (PRTR, Call UNICO I+D 5G 2021) under Grant TSI-063000-2021-5-6GSatNet-SS; in partby the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia; in part by the European Union’s Horizon Europe under Grant 101096526 (ETHER); and in part by the Ministry of Science and Innovation MICIN/Agencia Estatal de Investigación AEI/10.13039/501100811033 and EU Feder through the Project “GENESIS: GNSS Environmental and Societal Missions” under Grant PID 2021-1264360B-C21., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

RFI mitigation in microwave radiometry using the Karhunen–Loève transform

  • Díez García, Raúl
  • Camps Carmona, Adriano José
  • Hyuk, Park
This study presents a new signal-processing method to mitigate radio-frequency interference (RFI), based on the Karhunen–Loève transform (KLT). The main property of this method is that it is adaptive and RFI-agnostic, that is, it can potentially mitigate any type of RFI waveform. It is based on the estimation of the covariance matrix of the process, and the derivation of a basis that spans the RFI subspace. The methodology to find this basis is explained in detail. The theoretical performance obtained using KLT is explored by simulations, along with the evaluation of the influence of the system parameters. In addition, a couple of examples with real data are provided., This work was supported in part by the Project “GNSS Environmental and Societal Missions (GENESIS)—Subproject Universitat Politécnica de Catalunya (UPC)” under Grant PID2021-126436OB-C21, in part by the Spanish Ministerio de Ciencia e Innovación under Grant MCIN/AEI/10.13039/501100011033, and in part by the European Union “European Regional Development Fund (ERDF).”, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Resource-efficient FPGA architecture for real-time RFI mitigation in interferometric radiometers

  • Pérez Portero, Adrián
  • Querol Borràs, Jorge
  • Camps Carmona, Adriano José
Interferometric radiometers operating at L-band, such as ESA’s SMOS mission, enable crucial Earth observations providing high-resolution measurements of soil moisture, ocean salinity, and other geophysical parameters. However, the increasing electromagnetic spectrum utilization has led to significant Radio Frequency Interference (RFI) challenges, particularly critical given the sensors’ fine temperature resolution requirements of less than 1 K. This work presents the hardware implementation of an advanced RFI detection and mitigation algorithm specifically designed for interferometric radiometers, targeting future L-band missions. The implementation processes 1-bit quantized signals at 57.69375 MHz from multiple receivers, employing time-frequency analysis and polarimetric detection techniques while optimizing Field Programmable Gate Array (FPGA) resource utilization. Novel optimization strategies include overclocked processing cores operating at 230.775 MHz, efficient resource sharing through operation serialization, and strategic memory management. The system achieves real-time processing capabilities while maintaining detection probabilities above 63% with false alarm rates below 1% for typical interference scenarios. Performance validation using synthetic datasets demonstrates robust operation across various RFI conditions, making this implementation suitable as part of the RFI detection and mitigation efforts for future interferometric radiometer missions beyond SMOS., This research was funded by ESA, grant number ITT AO9359, by project “GENESIS: GNSS Environmental and Societal Missions—Subproject UPC”, Grant PID2021-126436OB-C21, sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and grant for recruitment of early stage research staff of Agència Gestió d’Ajuts Universitaris i de Recerca (AGAUR) Generalitat de Catalunya, Spain (FISDUR2020/105)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity study of multiconstellation GNSS-R to soil moisture and surface roughness using FY-3E GNOS-II data

  • Ma, Zhongmin
  • Camps Carmona, Adriano José
  • Hyuk, Park
  • Zhang, Shuangcheng
  • Li, Xiaojun
  • Wigneron, Jean-Pierre
The potential of spaceborne Global Navigation Satellite System Reflectometry (GNSS-R) to retrieve a variety of geophysical parameters has already been demonstrated in numerous studies. In 2021, China successfully launched the Fengyun-3E (FY-3E) polar orbit satellite. It carries the GNSS Occultation Sounder-II (GNOS-II) that can simultaneously receive reflected signals from GPS, BeiDou (BDS), and Galileo (GAL) constellations. Multi-constellation measurement significantly reduces the revisit time of the spaceborne GNSS-R data. This offers the possibility to study the sensitivity of the reflected signals from multi-GNSS constellations to surface parameters at global scale. The main objective of this paper is to analyze the sensitivity of FY-3E GNOS-II surface reflectivity (SR) to soil moisture (SM), vegetation, and surface roughness for different GNSS constellations, and different incidence angles. FY-3E data from May 2023 to October 2023 was collected along with SM data from the Soil Moisture Active Passive (SMAP). The SMAP static auxiliary surface roughness parameter SMAP-h was also collected for subsequent comparisons. Furthermore, the effect of vegetation in the reflected signal was accounted for using the Soil Moisture and Ocean Salinity (SMOS) INRA-CESBIO L-band vegetation optical depth (L-VOD). Afterwards, for each GNSS constellation, the SR were binned as a function of SM, SMAP-h and incidence angle. The results indicate that the sensitivity for the different GNSS constellations is consistent, showing similar behavior. Moreover, this study also reports for the first time the experimentally-computed sensitivity of FY-3E SR to SM under different SMAP-h values. Sensitivity of GNOS-II SR to SM is in general agreement with the values in the previous studies, demonstrating the feasibility of using single-pass multi-GNSS constellation GNSS-R data to retrieve surface parameters such as SM, with shorter revisit times. Furthermore, the results of this study re-emphasize the non-linear sensitivity of SR to SM. As compared to higher SM, SR is more sensitive at lower SM. This highlights the shortcomings of using linear models to retrieve SM. Meanwhile, another important finding is that for spaceborne GNSS-R data, SMAP-h may have underestimated the effective surface roughness., This research was funded by the National Natural Science Foundation of China Projects (Grant No.42074041); Shaanxi Province Science and Technology Innovation Team (Ref. 2021TD-51); The innovation team of ShaanXi Provincial Tri-Qin Scholars with Geoscience Big Data and Geohazard Prevention (2022); and Fundamental Research Funds for the Central Universities (CHD300102263715). This research has also been partially funded by the project “GENESIS: GNSS Environmental and Societal Missions – Subproject UPC”, Grant PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and EU FEDER “Una manera de hacer Europa”. Zhongmin Ma's work was partly supported by the China Scholarship Council (CSC) through a State Scholarship Fund (No. 202306560073)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

FSSCat: The Federated Satellite Systems 3Cat Mission: Demonstrating the capabilities of CubeSats to monitor essential climate variables of the water cycle

  • Camps Carmona, Adriano José
  • Muñoz Martin, Joan Francesc
  • Ruiz De Azúa Ortega, Juan Adrián
  • Fernández Capón, Lara Pilar
  • Pérez Portero, Adrián
  • Llaveria Godoy, David
  • Herbert, Christoph Josef
  • Pablos Hernández, Miriam
  • Golkar, Alessandro
  • Gutiérrez Peña, Antonio
The Federated Satellite Systems/ 3 Cat-5 (FSSCat) mission was the winner of the European Space Agency (ESA) Sentinel Small Satellite (S 3 ) Challenge and overall winner of the 2017 Copernicus Masters competition. It consisted of two six-unit CubeSats. The Earth observation payloads were 1) the Flexible Microwave Payload 2 (FMPL-2) onboard 3 Cat-5/A, an L-band microwave radiometer and GNSS reflectometer (GNSS-R) implemented using a software-defined radio (SDR), and 2) the HyperScout-2 onboard 3 Cat-5/B, a hyperspectral camera, with the first experiment using artificial intelligence to discard cloudy images. FSSCat was launched on 3 September 2020 and injected into a 535-km synchronous orbit. 3 Cat-5/A was operated for three months until the payload was probably damaged by a solar flare and coronal mass ejection. During this time, all scientific requirements were met, including the generation of coarse-resolution and downscaled soil moisture (SM) maps, sea ice extent (SIE) maps, concentration and thickness maps, and even wind speed (WS) and sea surface salinity (SSS) maps, which were not originally foreseen. 3 Cat-5/B was operated a few more months until the number of images acquired met the requirements. This article briefly describes the FSSCat mission and the FMPL-2 payload and summarizes the main scientific results., This work was supported by the 2017 ESA S3 challenge and Copernicus Masters overall winner award (FSSCat project) and ESA project FSSCat Validation Experiment in MOSAIC; Spanish Ministry of Science, Innovation, and Universities Sensing With Pioneering Opportunistic Techniques grant RTI2018-099008-BC21/AEI/10.13039/501100011033; GNSS Environmental and Societal Missions grant PID2021- 126436OB-C21; and Unidad de Excelencia Maria de Maeztu grant MDM-2016-0600., Peer Reviewed, Article signat per 30 autors/es: Adriano Camps, Universitat Politècnica de Catalunya, Barcelona, Spain, Institut d’Estudis Espacials de Catalunya, Barcelona, Spain, United Arab Emirates University, Abu Dhabi, United Arab Emirates; Joan Francesc Munoz-Martin, Universitat Politècnica de Catalunya, Barcelona, Spain, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA; Joan Adrià Ruiz-de-Azua, Universitat Politècnica de Catalunya, Barcelona, Spain, i2Cat, The Internet Research Center, Barcelona, Spain; Lara Fernandez, Universitat Politècnica de Catalunya, Barcelona, Spain; Adrian Perez-Portero, Universitat Politècnica de Catalunya, Barcelona, Spain; David Llavería, Universitat Politècnica de Catalunya, Barcelona, Spain; Christoph Herbert, Universitat Politècnica de Catalunya, Barcelona, Spain; Miriam Pablos, Institut de Ciències del Mar, Barcelona, Spain, Barcelona Expert Center on Remote Sensing, Barcelona, Spain; Alessandro Golkar, Universitat Politècnica de Catalunya, Barcelona, Spain, Department of Aerospace and Geodesy, Technical University of Munich, Munich, Germany; Antonio Gutiérrez, Deimos Engenharia, Lisbon, Portugal; Carlos António, Deimos Engenharia, Lisbon, Portugal; Jorge Bandeiras, Deimos Engenharia, Lisbon, Portugal; Jorge Andrade, Deimos Engenharia, Lisbon, Portugal; David Cordeiro, Deimos Engenharia, Lisbon, Portugal; Simone Briatore, Golbriak Space, Tallin, Estonia; Nicola Garzaniti, Golbriak Space, Tallin, Estonia, School of Aerospace, Transport, and Manufacturing, Cranfield University, Cranfield, Bedfordshire, U.K.; Fabio Nichele, Tyvak International, Torino, Italy; Raffaele Mozzillo, Tyvak International, Torino, Italy; Alessio Piumatti, Tyvak International, Torino, Italy; Margherita Cardi, Tyvak International, Torino, Italy; Marco Esposito, Cosine, Sassenheim, The Netherlands; Chris van Dijk, Cosine, Sassenheim, The Netherlands; Nathan Vercruyssen, Cosine, Sassenheim, The Netherlands; Joao Barbosa, Cosine, Sassenheim, The Netherlands; John Hefele, Cosine, Sassenheim, The Netherlands; Rick Koeleman, Cosine, Sassenheim, The Netherlands; Bernardo Carnicero Dominguez, European Space Research and Technology Center, European Space Agency, Noordwijk, The Netherlands; Massimiliano Pastena, European Space Research and Technology Center, European Space Agency, Noordwijk, The Netherlands; Giancarlo Filippazzo, European Space Research Institute, European Space Agency, Frascati (RM), Italy; Amanda Reagan, European Space Research Institute, European Space Agency, Frascati (RM), Italy., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Understanding the impact of turbulence on floating lidar measurements

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Peña Diaz, Alfredo
  • Mann, Jakob
  • Lolli, Simone
Retrieving accurate turbulence intensity from motion-corrupted floating lidar measurements is one of the main challenges of the offshore wind energy industry today. Toward overcoming this challenge, this work describes a method to retrieve the motion-corrected turbulence intensity from floating lidar measurements. The method relies on an atmospheric turbulence model combined with lidar-based flow characteristics estimates. The method simulates floating-lidar and anemometer-like measurements via synthetically-generated wind fields in turbulence boxes. We highlight the importance of accurate modeling of turbulence-box parameters to virtually eliminate motion-induced error. The proposed method was successfully tested over a 3-month campaign at IJmuiden by comparing floating-lidar turbulence measurements against those from measurements from a reference meteorological mast., This work was supported in part by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa” under Project PID2021-126436OB-C21, in part by the PRIN 2022 PNRR, in part by the Ministero dell’Università e della Ricerca under Project P20224AT3W, and in part by the European Commission Collaboration under Project H2020 ATMOACCESS (GA-101008004) and Project H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Magnetohydrodynamic effects on radio signal propagation in a plasma flow

  • Luís, Diana Zaida Felgueiras
  • Viladegut Farran, Alan
  • Schlachter, Sonja I.
  • Dalban-Canassy, Matthieu
  • Oswald, Johannes W.
  • Herdrichd, Georg H.
  • Camps Carmona, Adriano José
  • Chazot, Olivier
The plasma around a reentry spacecraft causes the charged particles to interact with the electromagnetic waves emitted by the on-board antennas, and the vehicle experiences radio communication difficulties. A proposed way to mitigate the radio blackout is the magnetic field alleviation technique that consists of superimposing a magnetic field onto the flow, converting the plasma into an anisotropic medium, and changing its refractive index. The applied magnetic field leads to the creation of an extraordinary wave that can propagate for plasma frequencies higher than the radio signal frequency. In this work, a probe containing a cryogenically-cooled high-temperature superconducting magnet is used to study the effect of an applied magnetic field on the plasma flow and on the radio signal propagation, in the VKI Plasmatron facility. The magnetized plasma is characterized by optical emission spectroscopy, stagnation heat flux, and dynamic pressure measurements. The experimental radio signal measurements are conducted using conical horn antennas, operating at frequencies in the K -band. An antenna is placed inside of the magnetic probe, transmitting toward a stagnant air plasma flow. The applied magnetic field causes an increase of the flow temperature, leading to an augmentation of the plasma frequency and stagnation heat flux, due to the Hall effect. No significant effects are observed in the signal transmission and attenuation, while the signal reflection trend is consistent with the variation of magnetic field strength, and plasma and collision frequencies. The dependency of the Faraday rotation with the magnetic field and its direction is observed. While a clear demonstration of the magnetic window is not conclusively observed in the transmission parameters, the behavior of the reflection coefficient shows that the radio blackout mitigation is feasible at optimal combinations of flow ionization., Diana Luís research is funded by a doctoral fellowship (2021.04930.BD) Granted by Fundação para a Ciência e Tecnologia (FCT Portugal). The MEESST project is funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 899298. Prof. Adriano Camps research is funded by Project GENESIS (PID 2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/5011000H033/ and EU ERDF "A way to do Europe!"., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of a dynamically re-configurable radio-frequency interference detection system for L-Band microwave radiometers

  • Pérez Portero, Adrián
  • Querol Borràs, Jorge
  • Mas-Vinolas, Andreu
  • Amezaga, Adria
  • Jove-Casulleras, Roger
  • Camps Carmona, Adriano José
Real-Time RFI Detection and Flagging (RT-RDF) for microwave radiometers is a versatile new FPGA algorithm designed to detect and flag Radio-Frequency Interference (RFI) in microwave radiometers. This block utilizes computationally-efficient techniques to identify and analyze RF signals, allowing the system to take appropriate measures to mitigate interference and maintain reliable performance. With L-Band microwave radiometry as the main application, this RFI detection algorithm focuses on the Kurtogram and Spectrogram to detect non-Gaussian behavior. To gain further modularity, an FFT-based filter bank is used to divide the receiver’s bandwidth into several sub-bands within the band of interest of the instrument, depending on the application. Multiple blanking strategies can then be applied in each band using the provided detection flags. The algorithm can be re-configured in the field, for example with dynamic integration times to support operation in different environments, or configurable thresholds to account for variable RFI environments. A validation and testing campaign has been performed on multiple scenarios with the ARIEL commercial microwave radiometer, and the results confirm the excellent performance of the system., This research was funded by project GENESIS: GNSS Environmental and Societal Missions–Subproject UPC (PID2021-126436OB-C21) sponsored by MCIN/AEI/10.13039/501100011033/ and EU ERDF “A way to do Europe”, and Adrian Perez-Portero (FISDUR2020/105) was supported by a grant for recruitment of early-stage research staff of the Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR)—Generalitat de Catalunya, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quality control of Doppler spectra from a vertically pointing, S-band profiling radar

  • Belak, Susan L.
  • Tanamachi, Robin
  • Asel, Matthew L.
  • Dennany, Grant
  • Gnanasambandam, Abhiram
  • Frasier, Steve
  • Rocadenbosch Burillo, Francisco
This study describes a novel combination of methods to remove spurious spectral peaks, or “spurs,” from Doppler spectra produced by a vertically pointing, S-band radar. The University of Massachusetts S-band frequency-modulated, continuous-wave radar (UMass FMCW) was deployed to monitor the growth of the CBL over northern Alabama during the VORTEX–Southeast field campaign in 2016. The Doppler spectra contained spurs caused by high-voltage switching power supplies in the traveling wave tube amplifier. In the original data processing scheme for this radar, a median filtering method was used to eliminate most of the spurs, but the largest ones persisted, which significantly degraded the quality of derived radar moments (e.g., reflectivity, Doppler velocity, and spectrum width) and hindered further analysis of these data (e.g., hydrometeor classification and boundary layer height tracking). Our technique for removing the spurs consists of three steps: (i) a Laplacian filter identifies and masks peaks in the spectra that are characteristic of the spurs in shape and amplitude, (ii) an in-painting method then fills in the masked area based on surrounding data, and (iii) the moments data (e.g., reflectivity, Doppler velocity, and spectrum width) are then recomputed using a coherent power technique. This combination of techniques was more effective than the median filter at removing the largest spurs from the Doppler spectra, and preserved more of the underlying Doppler spectral structure of the scatterers. Performance of both the median-filter and the in-painting methods are assessed through statistical analysis of the spectral power differences. Downstream products, such as boundary layer height detection, are more easily derived from the recomputed moments., This work was funded by NOAA grants NA18OAR4590313 and NA19OAR4590209. Dr. Stanley H. Chan and Dr. Andrew Pazmany advised us on the in-painting and CP techniques, respectively. The statements, findings, conclusions, and recommendations are those of the authors and do not necessarily reflect the views of the NOAA or the U.S. Department of Commerce. Dr. Rocadenbosch contributed the CBL detection algorithm via project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 and EU project H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)