Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 106
Encontrada(s) 2 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

The Role of Atmospheric Boundary Layer Wind and Turbulence on Surface Pollen Levels

  • Andujar-Maqueda, Juana
  • Ortiz Amezcua, Pablo
  • Cariñanos González, Paloma|||0000-0002-8955-2383
  • Abril Gago, Jesús
  • De Linares Fernández, Concepción
  • De Arruda Moreira, Gregori
  • Bravo Aranda, Juan Antonio|||0000-0002-2236-5241
  • Granados Muñoz, María José|||0000-0001-8718-5914
  • Alados Arboledas, Lucas|||0000-0003-3576-7167
  • Guerrero Rascado, Juan Luis
This work was supported by the projects INTEGRATYON3 (PID2020-117825GB-C21 and PID2020-117825GB-C22) and ELPIS (PID2020-120015RB-I00) funded by MCIN/AEI/10.13039/501100011033, by Junta de Andalucía through projects MORADO (C-366-UGR23) and DEM3TRIOS (A-RNM-430-UGR20) and AEROFOUR (C-EXP-167-UGR23), by University of Granada Plan Propio through Excellence Research Unit Earth Science and Singular Laboratories AGORA (LS2022-1) and UCBA-UGR (LS2024-3) program and the project PP2022.PP.34, by projects BIOD22_001 and BIOD22_002, funded by Consejería de Universidad, Investigación e Innovación and Gobierno de España and Unión Europea – NextGenerationEU, by the European Union's Horizon 2020 research and innovation program through projects ACTRIS.IMP (grant agreement No 871115) and ATMO-ACCESS (grant agreement number 101008004) and the strategic network ACTRIS-Spain (RED2022-134824-E). Authors acknowledge the COST Action PROBE (CA18235) for the exchange of expertise. Jesús Abril-Gago received funding through the grant FPU 21/01436, funded by MCIN/AEI/10.13039/501100011033. Funding for open access charge: Universidad de Granada/CBUA., The atmospheric boundary layer (ABL) is the lowest layer of the atmosphere, where most of the interactions between the atmosphere and the Earth’s surface occur. Within this layer, the air movements and the turbulent processes facilitate the dispersion and transport of particles. This work quantifies the effect of ABL-dynamics related variables on the surface pollen concentrations in the city of Granada, southeastern Spain. The Main Pollen Season (MPS) of two pollen types (Olea and Cupressaceae) and Doppler lidar data for different height ranges and ABL regimes were used for the period 2017-2022 and statistically analyzed based on Spearman correlations and Generalized Linear Model (GLM). Olea pollen concentrations, mainly originating from sources in the outskirts of the city, were significantly influenced by daytime wind direction, transporting high concentrations into the urban area, explaining up to 28% of the variability of the Olea pollen concentrations in the ABL of the city. At night, surface Olea pollen concentrations were affected by vertical wind, which explain the 5% of the variability, leading to fluctuations associated with its vertical transport. For Cupressaceae pollen concentrations, however, the pollen sources are located within the city and surface concentrations of Cupressaceae pollen are predominantly influenced by the urban ABL. The variability in surface concentrations is partly determined by diverse phenomena and conditions occurring across different regimes of ABL dynamics. Katabatic flows significantly contributed to Cupressaceae pollen concentrations at night, while high turbulence produced by the convective boundary layer (CBL) played a key role in their dispersion during daytime, explaining up to 10% of the variability of the Cupressaceae pollen concentrations near to surface. The difference in the results between both pollen types can be attributed to several interrelated factors such as location of sources, local weather conditions, different ABL regimes, intrinsic characteristics of pollen, and the flowering phenology and interactions with other environmental factors. The overall results demonstrate the substantial influence of ABL dynamics on surface pollen concentrations (explain up to 29% of the variability for Olea pollen concentrations and 37% for Cupressaceae ones), highlighting its crucial role in the particle transport, dispersion and distribution in the atmosphere. These findings emphasize the need for a better understanding of the ABL to adequately address air quality and public health challenges in urban environments., Junta de Andalucía (C-366-UGR23), (A-RNM-430-UGR20), (C-EXP-167-UGR23), University of Granada (LS2022-1), (LS2024-3), PP2022.PP.34, Consejería de Universidad, Investigación e Innovación, Gobierno de España BIOD22_001, BIOD22_002, Unión Europea – NextGenerationEU, European Union's Horizon 2020 (871115), (101008004), (RED2022-134824-E), COST Action PROBE (CA18235), MCIN/AEI/10.13039/501100011033 PID2020-117825GB-C21, PID2020-117825GB-C22, PID2020-120015RB-I00, FPU 21/01436, Universidad de Granada/CBUA
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Cloud condensation nuclei activation properties of Mediterranean pollen types considering organic chemical composition and surface tension effects

  • Casans Gabasa, Andrea
  • Rejano Martínez, Fernando
  • Maldonado Valderrama, Julia|||0000-0001-6372-723X
  • Casquero Vera, Juan Andrés
  • Ruiz Peñuela, Soledad
  • Lyamani, H.
  • Cazorla Cabrera, Alberto|||0000-0002-0901-1609
  • Pérez Ramírez, Daniel
  • Olmo Reyes, Francisco José
  • Alados Arboledas, Lucas|||0000-0003-3576-7167
  • Cariñanos González, Paloma|||0000-0002-8955-2383
  • Titos Vela, Gloria
Supplementary data to this article can be found online at https://doi.org/10.1016/j.atmosenv.2023.119961, This work was supported by BioCloud project (RTI2018.101154.A. I00) funded by MCIN/AEI/10.13039/501100011033, FEDER “Una manera de hacer Europa” and NUCLEUS project (PID2021-128757OB- I00) funded by MCIN/AEI/10.13039/501100011033 and NextGener- ationEU/PRTR. This work received support from the European Union’s Horizon 2020 research and innovation program through projects ACT- RIS.IMP (grant agreement No 871115) and ATMO_ACCESS (grant agreement No 101008004), by the Spanish Ministry of Science and Innovation through projects ELPIS (PID2020-120015RB-I00) and ACT- RIS-Espa˜na (CGL2017-90884REDT)). By the Junta de Andalucía Excel- lence, project ADPANE (P20-00136), AEROPRE (P-18-RT-3820) and by University of Granada Plan Propio through Visiting Scholars (PPVS2018-04), Singular Laboratory (LS2022-1) programs and Pre- Competitive Research Projects Pre-Greenmitigation3 (PP2022.PP34). Funding for open access charge, University of Granada/CBUA. Andrea Casans is funded by Spanish ministry of research and innovation under the predoctoral program FPI (PRE2019-090827) funded by MCIN/AEI/ 10.13039/501100011033, FSE “El FSE invierte en tu futuro”. Fernando Rejano is funded by Spanish ministry of universities through predoctoral grant FPU19/05340. Juan Andr´es Casquero-Vera is funded by FJC2021- 047873-I, MCIN/AEI/10.13039/501100011033 and NextGener- ationEU/PRTR. Elisabeth Andrews is funded in part by NOAA cooper- ative agreements NA17OAR4320101. Thanks to the NOAA Global Monitoring Laboratory for the use of the CCN counter, Wind-dispersed pollen grains emitted from vegetation are directly injected into the atmosphere being an important source of natural aerosols globally. These coarse particles of pollen can rupture into smaller particles, known as subpollen particles (SPPs), that may act as cloud condensation nuclei (CCN) and affect the climate. In this study, we characterize and investigate the ability of SPPs of 10 Mediterranean-climate pollen types to activate as CCN. A continuous flow CCN counter (CCNC) was used to measure the activation of size-selected (80, 100 and 200 nm dry mobility diameter) particles at different supersaturations (SS). Hygroscopicity parameter (κ) for each SPP type and size has been calculated using κ-K¨ohler theory. Organic chemical speciation and protein content has been determined to further characterize pollen solutions. Furthermore, the surface activity of SPPs has also been investigated by using pendant drop tensiometry. All studied SPP samples show critical supersat- uration (SSCrit) values that are atmospherically relevant SS conditions. Hygroscopicity κ values are in the range characteristic of organic compounds (0.1–0.3). We found that organic speciation and protein content vary substantially among pollen types, with saccharides and fatty acids being the only organic compounds found in all pollen types. A clear relationship between SPP activation and its organic composition was not observed. This study also reveals that all SPPs investigated reduce the surface tension of water at high concentrations but at diluted concentrations (such as those of activation in the CCNC), the water surface tension value is a good approximation in K¨ohler theory. Overall, this analysis points out that pollen particles might be an important source of CCN in the atmosphere and should be considered in aerosol-cloud interactions processes., BioCloud project (RTI2018.101154.A. I00) funded by MCIN/AEI/10.13039/501100011033, FEDER “Una manera de hacer Europa” and NUCLEUS project (PID2021-128757OB- I00) funded by MCIN/AEI/10.13039/501100011033, NextGenerationEU/PRTR, European Union’s Horizon 2020 research and innovation program through projects ACT- RIS.IMP (grant agreement No 871115), European Union’s Horizon 2020 research and innovation program through project ATMO_ACCESS (grant agreement No 101008004, Spanish Ministry of Science and Innovation through projects ELPIS (PID2020-120015RB-I00) and ACT-RIS-España (CGL2017-90884REDT), Junta de Andalucía Excel- lence, project ADPANE (P20-00136), AEROPRE (P-18-RT-3820), University of Granada Plan Propio through Visiting Scholars (PPVS2018-04), Singular Laboratory (LS2022-1) programs and Pre- Competitive Research Projects Pre-Greenmitigation3 (PP2022.PP34), Funding for open access charge, University of Granada/CBUA, Spanish ministry of research and innovation under the predoctoral program FPI (PRE2019-090827) funded by MCIN/AEI/ 10.13039/501100011033, Spanish ministry of universities through predoctoral grant FPU19/05340, FJC2021- 047873-I, MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR, NOAA cooperative agreements NA17OAR4320101
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Quantifying turbulent coarse particle transport over drylands of Southeastern Iberia using a stand-alone Doppler lidar methodology

  • Abril Gago, Jesús
  • Ortiz Amezcua, Pablo
  • Kowalski, Andrew
  • Bravo-Aranda, Juan Antonio|||0000-0002-2236-5241
  • Granados-Muñoz, María José|||0000-0001-8718-5914
  • Andújar-Maqueda, Juana
  • Alados-Arboledas, Lucas|||0000-0003-3576-7167
  • Guerrero Rascado, Juan Luis
This work was supported by the project INTEGRATYON3 (PID2020-117825GB-C21 and PID2020-117825GB-C22) funded by MICIU/AEI/10.13039/501100011033, and by University of Granada Plan Propio through Excellence Research Unit Earth Science and Singular Laboratory AGORA (LS2022-1) program, by the European Union‘s Horizon 2020 research and innovation program through project ACTRIS.IMP (grant agreement No 871115) and the strategic network ACTRIS-España (RED2022-134824-E), by Junta de Andalucía through project MORADO (C-366-UGR23), and by University of Granada Plan Propio programs Visiting Scholars (PPVS2024-06), Excellence Research Unit Earth Science and Singular Laboratory AGORA (LS2022-1) and Project for Early-Career Researchers EMITE-EC (PPJIB-2024-12). This study is part of a project that is supported by the European Commission under the Horizon 2020 – Research and Innovation Framework Programme, H2020-INFRAIA-2020-1, Grant Agreement number: 101008004. Jesús Abril-Gago received funding through the grants FPU21/01436 and EST24/00285 funded by MICIU/AEI/10.13039/501100011033. Funding for open access charge: Universidad de Granada/CBUA., Using a methodology for the estimation of coarse particle exchanges via Doppler lidar, based on the eddy covariance technique, profiles of vertical transport velocities were derived and analyzed. The methodology was tested across diverse atmospheric conditions in two different Mediterranean dryland landscapes in Southeastern Spain, namely Guadiana-UGR (extensive, inland olive grove), and Aguamarga (shrubland with maritime influence). Firstly, study cases were analyzed and the main atmospheric mechanisms impacting particle transport were identified. Convective mixing within the boundary layer was found to be the primary driver of the upward particle transport. However, cloud cover was observed to attenuate the transport velocity, while significant deposition events were observed during a Saharan dust outbreak. Secondly, positive transport velocities were found during convective periods and lower, yet positive, values during non-convective periods. Higher transport velocities were observed during a drier period at Guadiana-UGR, likely due to drier soil conditions. Aguamarga exhibited notably lower transport velocities. Considering only the lowermost observational level (105 m above the ground), net emission of particles was observed. Footprint analysis supported the representativeness of the fluxes. Our findings provide novel insights into particle exchanges over Mediterranean drylands, quantifying the turbulent transport and identifying its atmospheric drivers. Additionally, the considered ecosystems were found to be net sources of particles during the study periods. These results highlight the role of drylands as emerging contributors to global dust emissions in the context of climate change., MICIU/AEI/10.13039/501100011033 PID2020-117825GB-C21, PID2020-117825GB-C22, FPU21/01436, EST24/00285, University of Granada (LS2022-1), (PPVS2024-06), (PPJIB-2024-12), European Union‘s Horizon 2020 (871115), (RED2022-134824-E), (H2020-INFRAIA-2020-1: 101008004), Junta de Andalucía (C-366-UGR23), Universidad de Granada/CBUA
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Dehazing in hyperspectral images: the GRANHHADA database

  • Fernández Carvelo, Sol
  • Martínez Domingo, Miguel Ángel
  • Valero Benito, Eva María|||0000-0002-4671-5533
  • Hernández Andrés, Javier|||0000-0002-6457-7568
In this study, we present an analysis of dehazing techniques for hyperspectral images in outdoor scenes. The aim of our research is to compare different dehazing approaches for hyperspectral images and introduce a new hyperspectral image database called GRANHHADA (GRANada Hyperspectral HAzy Database) containing 35 scenes with various haze conditions. We conducted three experiments to assess dehazing strategies, using the Multi-Scale Convolutional Neural Network (MS-CNN) algorithm. In the first experiment, we searched for optimal triplets of spectral bands to use as input for dehazing algorithms. The results revealed that certain bands in the near-infrared range showed promise for dehazing. The second experiment involved sRGB dehazing, where we generated sRGB images from hyperspectral data and applied dehazing techniques. While this approach showed improvements in some cases, it did not consistently outperform the spectral band-based approach. In the third experiment, we proposed a novel method that involved dehazing each spectral band individually and then generating an sRGB image. This approach yielded promising results, particularly for images with a high level of atmospheric dust particles. We evaluated the quality of dehazed images using a combination of image quality metrics including reference and non-reference quality scores. Using a reduced set of bands instead of the full spectral image capture can contribute to lower processing time and yields better quality results than sRGB dehazing. If the full spectral data are available, then band-per-band dehazing is a better option than sRGB dehazing. Our findings provide insights into the effectiveness of different dehazing strategies for hyperspectral images, with implications for various applications in remote sensing and image processing., Junta de Andalucía (grant number A-TIC-050-UGR18), FEDER Funds, European Union’s Horizon 2020 research and innovation program through project ACTRIS.IMP (grant agreement No 871115), European Union’s Horizon 2020 research and innovation program through project ATMO_ACCESS (grant agreement No 101008004), Spanish Ministry of Science Innovation and Universities MICINN, grant number RTI2018-094738-B-100
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Synergy between Short-Range Lidar and In Situ Instruments for Determining the Atmospheric Boundary Layer Lidar Ratio

  • Bedoya Velásquez, Andrés Esteban
  • Ceolato, Romain
  • Titos Vela, Gloria
  • Bravo Aranda, Juan Antonio|||0000-0002-2236-5241
  • Casans, Andrea
  • Patrón, Diego
  • Fernández Carvelo, Sol
  • Guerrero Rascado, Juan Luis
  • Alados Arboledas, Lucas|||0000-0003-3576-7167
Short-range elastic backscatter lidar (SR-EBL) systems are remote sensing instruments for studying low atmospheric boundary layer processes. This work presents a field campaign oriented to filling the gap between the near-surface aerosol processes regarding aerosol radiative properties and connecting them with the atmospheric boundary layer (ABL), centering attention on the residual layer and the ABL transition periods. A Colibri Aerosol Lidar (CAL) instrument, based on the short-range lidar with high spatio-temporal resolution, was used for the first time in the ACTRIS AGORA facility (Andalusian Global Observatory of the Atmosphere) in Granada (Spain). This study showed the possibility of combining lidar and in situ measurements in the lowermost 150 m. The results address, on the one hand, the characterization of the short-range lidar for developing a method to find the calibration constant of the system and to correct the incomplete overlap to further data exploitation. On the other hand, relevant radiative properties such as the temporal series of the aerosol lidar ratio and extinction coefficient were quantified. The campaign was divided in three different periods based on the vehicular emission peak in the early mornings, namely, before, during, and after the emission peak. For before and after the emission peak data classification, aerosol properties presented closer values; however, large variability was obtained after the emission peak reaching the maximum values of extinction and a lidar ratio up to 51.5 ± 11.9 (Mm)−1 and 36.0 ± 10.5 sr, respectively. During the emission peaks, the values reached for extinction and lidar ratio were up to 136.8 ± 26.5 (Mm)−1 and 119.0 ± 22.7 sr, respectively., Spanish national projects PID2020-120015RB-100, PID2020-117825GB-C21, and PID2020-117825GB-C22 funded by MCIN/AEI/10.13039/501100011033, Spanish project FEDER/Junta de Andalucía-Consejería de Transformación Económica, Industria, Conocimiento y Universidades/Proyecto C-EXP-366-UGR23, University of Granada project PP2022.PP.34, Europen project ATMO-ACCESS (grant agreement No. 101008004), Scientific Unit of Excellence: Earth System (UCE-PP2017-02), Spanish national project PID2020-120015RB-100 funded by MCIN/AEI/10.13039/501100011033, Grant PID2021-128757OB-I00 (NUCLEUS project) funded by MCIN/AEI/10.13039/501100011033/ERDFA “A way of making Europe”, Project PID2022-142708NA-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER,UE, Spanish ministry of research and innovation under the predoctoral program FPI (PRE2019-090827) funded by MCIN/AEI/10.13039/501100011033, FSE “El FSE invierte en tu futuro”, National Council of Research and Development through Brazilian project 444761/2023-3
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Inter-relations of precipitation, aerosols, and clouds over Andalusia, southern Spain, revealed by the Andalusian Global ObseRvatory of the Atmosphere (AGORA)

  • Wang, Wenyue
  • Hocke, Klemens
  • Nania Escobar, Leonardo Santos|||0000-0001-7386-0712
  • Cazorla Cabrera, Alberto|||0000-0002-0901-1609
  • Titos Vela, Gloria
  • Matthey, Renaud
  • Alados Arboledas, Lucas|||0000-0003-3576-7167
  • Millares Valenzuela, Agustín|||0000-0002-7120-7493
  • Navas Guzmán, Francisco
The south-central interior of Andalusia experiences intricate precipitation patterns as a result of its semi-arid Mediterranean climate and the impact of Saharan dust and human-made pollutants. The primary aim of this study is to monitor the inter-relations between various factors, such as aerosols, clouds, and meteorological variables, and precipitation systems in Granada using ground-based remote sensing and in situ instruments including a microwave radiometer, ceilometer, cloud radar, nephelometer, and weather station. Over an 11-year period, we detected rain events using a physical retrieval method that employed microwave radiometer measurements. A composite analysis was applied to them to construct a climatology of the temporal evolution of precipitation. It was found that convective rain is the dominant precipitation type in Granada, accounting for 68% of the rain events. The height of the cloud base is mainly distributed at an altitude of 2 to 7 km. Integrated water vapor (IWV) and integrated cloud liquid water (ILW) increase rapidly before the onset of rain. Aerosol scattering at the surface level and hence the aerosol concentration are reduced during rain, and the predominant mean size distribution of aerosol particles before, during, and after rain is almost the same. A meteorological environment favorable for virga formation is observed in Granada. The surface weather station detected rainfall later than the microwave radiometer, indicating virga according to ceilometer and cloud radar data. We used 889 rain-day events identified by weather station data to determine precipitation intensity classes and found that light rain is the main precipitation intensity class in Granada, accounting for 72% of the rain-day events. This can be a result of the high tropospheric temperature induced by the Andalusian climate and the reduction of cloud droplet size by the high availability of aerosol particles in the urban atmosphere. This study provides evidence that aerosols, clouds, and meteorological variables have a combined impact on precipitation which can be considered for water resource management and improving rain forecasting accuracy., China Scholarship Council (CSC), Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS), Ramón y Cajal program (ref. RYC2019-027519-I) of the Spanish Ministry of Science and Innovation, Grant PID2021-128008OB-I00 funded by MCIN/AEI/10.13039/501100011033/ FEDER – “A way of making Europe”, Project AEROMOST (ProExcel_00204) by the Junta de Andalucía, European Union’s Horizon 2020 research and innovation program through projects ACTRIS.IMP (grant agreement no. 871115) and ATMO_ACCESS (grant agreement no. 101008004), Spanish Ministry of Science and Innovation through projects ELPIS (PID2020-120015RB-I00), NUCLEUS (PID2021-128757OB-I00), and ACTRIS-España (RED2022-134824-E), Junta de Andalucía Excellence project ADAPNE (P20-00136), AEROPRE (P-18-RT-3820), University of Granada Plan Propio through Singular Laboratory AGORA (LS2022-1) and the Scientific Units of Excellence Program (grant no. UCE-PP2017-02)
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Determining the impact of new particle formation events on cloud condensation nuclei (CCN) concentrations

  • Casans, Andrea
  • Casquero Vera, Juan Andrés
  • Rejano Martínez, Fernando
  • Lyamani, Hassan
  • Cazorla Cabrera, Alberto|||0000-0002-0901-1609
  • Zabala, Inés
  • Huang, Wei
  • Agro', Myriam
  • Barreto, África
  • Rodríguez, Sergio
  • González, Yenny
  • Bianchi, Federico
  • Petäj̈ä, Tuukka
  • Olmo Reyes, Francisco José
  • Alados Arboledas, Lucas|||0000-0003-3576-7167
  • Cariñanos González, Paloma|||0000-0002-8955-2383
  • Gysel-Beer, Martin
  • Titos Vela, Gloria
This work was partially supported by NUCLEUS project PID2021-128757OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and “European Union NextGenerationEU/PRTR” and BioCloud project RTI2018.101154.A.I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER “ERDF A way of making Europe”. This work received support from the European Union‘s Horizon 2020 research and innovation program through projects ACTRIS.IMP (grant agreement No 871115) and ATMO_ACCESS (grant agreement No 101008004), by the Spanish Ministry of Science and Innovation through projects ELPIS PID2020-120015RB-I00 MCIN/AEI /10.13039/501100011033 and ACTRIS-España RED2022-134824-E and by University of Granada Plan Propio through Singular Laboratory (LS2022-1) program. The work was also partially funded through EU projects FOCI (101056783), FORCeS (821205), CERTAINTY (101137680) and by Research Council of Finland via Atmosphere and Climate Competence Center (ACCC) Flagship (337549,3570902, 359340) and by University of Helsinki, Faculty of Science via ACTRIS-HY. It was also funded by grants BIOD22_001 and BIOD22_002, funded by Consejería de Universidad, Investigación e Innovación and Gobierno de España and Unión Europea – NextGenerationEU. Andrea Casans thanks Dr. Barbara Bertozzi (from PSI) for her dedication and help with Python programming and Dr. Elisabeth Andrews (from NOAA) for her English revision. Andrea Casans is funded by Spanish ministry of research and innovation under the predoctoral program FPI (PRE2019-090827) funded by MCIN/AEI/ 10.13039/501100011033, FSE “El FSE invierte en tu futuro”. Martin Gysel-Beer contributed to this study as part of ACTRIS-Switzerland funded by the Swiss State Secretariat for Education and Research and Innovation (SERI)., Atmospheric aerosol particles act as cloud condensation nuclei (CCN) and play a crucial role in the climate system and hydrological cycle. New particle formation (NPF) events are a significant source of CCN, though their global contribution to the CCN budget remains uncertain. We propose a novel method to estimate the direct contribution of NPF events to CCN concentrations, distinguishing between NPF-generated particles and background or transported aerosols. Previous methods estimated CCN concentration enhancements by comparing CCN concentration at different times periods (during or after NPF events with CCN concentrations prior to the events or with non-event days). Our method overcomes this limitation by focusing on the ceiling size that newly formed particles can reach, the timing of NPF events, and isolating the NPF mode from the overall aerosol size distribution. The method was developed using size-resolved CCN measurements at the Sierra Nevada Station (SNS) in southeastern Spain (2500 m a.s.l.). We demonstrate that the method is also applicable to polydisperse CCN measurements, showing consistency across both variants. Additionally, it has been applied to NPF events at the Izaña Observatory (IZO) in Tenerife (Canary Islands, 2367 m a.s.l.). Both SNS and IZO frequently experience NPF events, though their environmental and aerosol characteristics differ, providing insights into the advantages and limitations of the method. Comparison between the two sites reveals that the mean NPF contribution to CCN is 6.2 ± 4.8 % (IQR = 9 %) at SNS and 24 ± 25 % (IQR = 28 %) at IZO. The higher NPF contribution at IZO is attributed to the ability of newly formed particles to grow to larger sizes and the presence of fewer transported boundary layer particles acting as CCN. Both sites show significant variability in the NPF contribution percentage due to the distinct characteristics of each NPF event., MICIU/AEI/10.13039/501100011033/ and “European Union NextGenerationEU/PRTR” PID2021-128757OB-I00, MCIN/AEI/10.13039/501100011033 and FEDER RTI2018.101154.A.I00, European Union‘s Horizon 2020 No 871115, No 101008004, Spanish Ministry of Science and Innovation ELPIS PID2020-120015RB-I00 MCIN/AEI /10.13039/501100011033, ACTRIS-España RED2022-134824-E, University of Granada (LS2022-1), EU projects FOCI (101056783), FORCeS (821205), CERTAINTY (101137680), Consejería de Universidad, Investigación e Innovación and Gobierno de España and Unión Europea – NextGenerationEU BIOD22_001, BIOD22_002, MCIN/AEI/ 10.13039/501100011033 FPI (PRE2019-090827), FSE “El FSE invierte en tu futuro”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of the 2021 La Palma volcanic eruption on air quality: Insights froma multidisciplinary approach

  • Milford, Celia
  • Torres, Carlos F.
  • Vilches, Jon
  • Gossman, Ann-Kathrin
  • Weis, Frederik
  • Suárez-Molina, David
  • García, Omaira
  • Prats, Natalia
  • Barreto, África
  • García, Rosa D.
  • Bustos, Juan J.
  • Marrero, Carlos L.
  • Ramos, Ramón
  • Chinea, Nayra
  • Boulesteix, Thomas
  • Taquet, Noémie
  • Rodríguez González, Sergio
  • López-Darias, Jessica
  • Sicard, Michaël
  • Córdoba-Jabonero, Carmen
  • Cuevas, Emilio
The La Palma 2021 volcanic eruption was the first subaerial eruption in a 50-year period in the Canary Islands (Spain), emitting ~1.8 Tg of sulphur dioxide (SO2) into the troposphere over nearly 3 months (19 September-13 December 2021), exceeding the total anthropogenic SO2 emitted from the 27 European Union countries in 2019. We conducted a comprehensive evaluation of the impact of the 2021 volcanic eruption on air quality (SO2, PM10 and PM2.5 concentrations) utilising a multidisciplinary approach, combining ground and satellite-based measurements with height-resolved aerosol and meteorological information. High concentrations of SO2, PM10 and PM2.5 were observed in La Palma (hourly mean SO2 up to ~2600 μg m−3 and also sporadically at ~140 km distance on the island of Tenerife (> 7700 μg m−3) in the free troposphere. PM10 and PM2.5 daily mean concentrations in La Palma peaked at ~380 and 60 μg m−3. Volcanic aerosols and desert dust both impacted the lower troposphere in a similar height range (~ 0–6 km) during the eruption, providing a unique opportunity to study the combined effect of both natural phenomena. The impact of the 2021 volcanic eruption on SO2 and PM concentrations was strongly influenced by the magnitude of the volcanic emissions, the injection height, the vertical stratification of the atmosphere and its seasonal dynamics. Mean daily SO2 concentrations increased during the eruption, from 38 μg m−3 (Phase I) to 92 μg m−3 (Phase II), showing an opposite temporal trend to mean daily SO2 emissions, which decreased from 34 kt (Phase I) to 7 kt (Phase II). The results of this study are relevant for emergency preparedness in all international areas at risk of volcanic eruptions; a multidisciplinary approach is key to understand the processes by which volcanic eruptions affect air quality and to mitigate and minimise impacts on the population., The authors gratefully acknowledge the extraordinary effort carried out by the AEMET staff (both in La Palma and in support of the activities in La Palma) during the volcanic eruption, from the Izaña Atmospheric Research Center and the Delegation of AEMET in the Canary Islands. We thank the CSIC deployment service during the eruption and its coordination by Manuel Nogales. We also gratefully acknowledge the dedication and information provided by the PEVOLCA Scientific Committee and all the support received from the insular and local governments (Cabildo Insular de La Palma and the Ayuntamientos de Tazacorte, Los Llanos de Aridane and El Paso). The authors would also like to thank the Canary Islands Government for data from their Air Quality Monitoring Network and the MPL Network (MPLNET) for their support to the lidar measurements used in this paper. The authors also acknowledge the support from ACTRIS and ACTRIS-Spain, the Spanish Ministry of Science and Innovation and the support from the European Union H2020 program through the following projects (PID2019-104205GB-C21/AEI/10.13039/501100011033, EQC2018-004686-P, PID2019-103886RB-I00/AEI/10.13039/501100011033 and PID2020- 521-118793GA-I00) and programs (GA No. 654109, 778349, 871115, 101008004 and 101086690). Research activities of the CSIC staff during the eruption were funded by CSIC through the CSIC-PIE project with ID numbers PIE20223PAL009 and PIE20223PAL013 (Real Decreto 1078/2021, de 7 de diciembre). Part of this study was performed within the framework of the project AERO-EXTREME (PID2021-125669NBI00) funded by the Spanish State Research Agency (AEI) and ERDF funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Araújo da Silva, Marcos P.
  • Rocadenbosch, Francesc
  • Farré-Guarné, Joan
  • Salcedo-Bosch, Andreu
  • González-Marco, Daniel
  • Peña, Alfredo
This article belongs to the Topic High-Resolution Earth Observation Systems, Technologies, and Applications., This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (CommSensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo-Bosch, Andreu
  • Rocadenbosch, Francesc
  • Sospedra, Joaquim
This article belongs to the Section Atmospheric Remote Sensing., An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to −0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2 ) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measurement report: Spectral and statistical analysis of aerosol hygroscopic growth from multi-wavelength lidar measurements in Barcelona, Spain

  • Sicard, Michaël
  • Fortunato dos Santos Oliveira, Daniel Camilo
  • Muñoz-Porcar, Constantino
  • Gil-Díaz, Cristina
  • Comerón, Adolfo
  • Rodríguez-Gómez, Alejandro
  • Dios Otín, Federico
This paper presents the estimation of the hygroscopic growth parameter of atmospheric aerosols retrieved with a multi-wavelength lidar, a micro-pulse lidar (MPL) and daily radiosoundings in the coastal region of Barcelona, Spain. The hygroscopic growth parameter, γ, parameterizes the magnitude of the scattering enhancement in terms of the backscatter coefficient following Hänel parameterization. After searching for time-colocated lidar and radiosounding measurements (performed twice a day, all year round at 00:00 and 12:00 UTC), a strict criterion-based procedure (limiting the variations of magnitudes such as water vapor mixing ratio (WMVR), potential temperature, wind speed and direction) is applied to select only cases of aerosol hygroscopic growth. A spectral analysis (at the wavelengths of 355, 532 and 1064 nm) is performed with the multi-wavelength lidar, and a climatological one, at the wavelength of 532 nm, with the database of both lidars. The spectral analysis shows that below 2 km the regime of local pollution and sea salt γ decreases with increasing wavelengths. Since the 355 nm wavelength is sensitive to smaller aerosols, this behavior could indicate slightly more hygroscopic aerosols present at smaller size ranges. Above 2 km (the regime of regional pollution and residual sea salt) the values of γ at 532 nm are nearly the same as those below 2 km, and its spectral behavior is flat. This analysis and others from the literature are put together in a table presenting, for the first time, a spectral analysis of the hygroscopic growth parameter of a large variety of atmospheric aerosol hygroscopicities ranging from low (pure mineral dust, γ <0.2) to high (pure sea salt, γ > 1.0) hygroscopicity. The climatological analysis shows that, at 532 nm, γ is rather constant all year round and has a large monthly standard deviation, suggesting the presence of aerosols with different hygroscopic properties all year round. The annual γ is 0.55 ± 0.23. The height of the layer where hygroscopic growth was calculated shows an annual cycle with a maximum in summer and a minimum in winter. Former works describing the presence of recirculation layers of pollutants injected at various heights above the planetary boundary layer (PBL) may explain why γ, unlike the height of the layer where hygroscopic growth was calculated, is not season-dependent. The subcategorization of the whole database into No cloud and Below-cloud cases reveals a large difference of γ in autumn between both categories (0.71 and 0.33, respectively), possibly attributed to a depletion of inorganics at the point of activation into cloud condensation nuclei (CCN) in the Below-cloud cases. Our work calls for more in situ measurements to synergetically complete such studies based on remote sensing., This research was funded by the Spanish Ministry of Science and Innovation (grant nos. PID2019103886RB-I00) and the H2020 program from the European Union (grant nos. 654109, 778349, 871115 and 101008004)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estimation of the mass concentration of volcanic ash using ceilometers: Study of fresh and transported plumes from La Palma volcano

  • Bedoya-Velásquez, Andres E.
  • Hoyos-Restrepo, Manuela
  • Barreto, África
  • García, Rosa D.
  • Romero-Campos, Pedro Miguel
  • García, Omaira
  • Ramos, Ramón
  • Roininen, Reijo
  • Toledano, Carlos
  • Sicard, Michaël
  • Ceolato, Romain
This article belongs to the Special Issue Selected Papers of the European Lidar Conference., This study presents a synergistic approach to the study of the aerosol optical and microphysical properties measured in La Palma, Spain, during the 2021 eruption of the Cumbre Vieja volcano (from 19 September to 13 December 2021). This study aims to characterize the different phases of the volcanic eruption using the spatio-temporal evolution of the event together with the mass concentration quantification of four different atmospheric layers. The impact of the plume’s pathway that reached the South of France is analyzed. Here, passive and active remote sensors were used, namely CL51 and CL61 ceilometers and AERONET sunphotometers. The attenuated backscattering ranged from 0.8 to 9.1 × 10−6 (msr)−1 and the volume depolarization ratio measured nearby the volcano was up to 0.3. The ash plume remained within the first 4 km agl, with intense episodes that reached mean aerosol optical depth values of up to 0.4. Thirteen study cases were selected where coarse mode was dominant over fine mode. For the data selection, the fine and coarse lidar ratios found were 3.9 ± 0.8 and 21.0 ± 3.8 sr in the north and 6.9 ± 1.8 and 30.1 ± 10.3 sr in the south. The ash mass concentration reached moderate levels with maximum values of up to 313.7 μ gm−3., This work was financially supported by ONERA within the framework of the PROMETE project 2017–2021; the Spanish Ministry of Science and Innovation (PID2019-103886RB-I00\AEI\10.13039\501100011033); and the H2020 program from the European Union (GA no. 654109, 778349, 871115, 101008004 and 101086690)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A unified formulation for the computation of the six-degrees-of-freedom-motion-induced errors in floating doppler wind LiDARs

  • Salcedo-Bosch, Andreu
  • Farré-Guarné, Joan
  • Araújo da Silva, Marcos P.
  • Rocadenbosch, Francesc
This article belongs to the Section Atmospheric Remote Sensing., This work presents an analytical formulation to assess the six-degrees-of-freedom-motion-induced error in floating Doppler wind LiDARs (FDWLs). The error products derive from the horizontal wind speed bias and apparent turbulence intensity. Departing from a geometrical formulation of the FDWL attitude and of the LiDAR retrieval algorithm, the contributions of the rotational and translational motion to the FDWL-measured total error are computed. Central to this process is the interpretation of the velocity–azimuth display retrieval algorithm in terms of a first-order Fourier series. The obtained 6 DoF formulation is validated numerically by means of a floating LiDAR motion simulator and experimentally in nearshore and open-sea scenarios in the framework of the Pont del Petroli and IJmuiden campaigns, respectively. Both measurement campaigns involved a fixed and a floating 𝑍𝑒𝑝ℎ𝐼𝑅TM 300 LiDAR. The proposed formulation proved capable of estimating the motion-induced FDWL horizontal wind speed bias and returned similar percentiles when comparing the FDWL with the fixed LiDAR. The estimations of the turbulence intensity increment statistically matched the FDWL measurements under all motional and wind scenarios when clustering the data as a function of the buoy’s mean tilt amplitude, mean translational-velocity amplitude, and mean horizontal wind speed., This research project was part of the project PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fresh volcanic aerosols injected in the atmosphere during the volcano eruptive activity at the Cumbre Vieja area (La Palma, Canary Islands): Temporal evolution and vertical impact

  • Córdoba-Jabonero, Carmen
  • Sicard, Michaël
  • Barreto, África
  • Toledano, Carlos
  • López-Cayuela, María Ángeles
  • Gil-Díaz, Cristina
  • García, Omaira
  • Carvajal-Pérez, Clara V.
  • Comerón, Adolfo
  • Ramos, Ramón
  • Muñoz-Porcar, Constantino
  • Rodríguez-Gómez, Alejandro
For the first time in fifty years, the Cumbre Vieja volcanic area (La Palma, Canary Islands, Spain) erupted on September 19, 2021, giving birth to a new volcano. Fresh volcanic aerosols were continuously injected into the troposphere at different height levels, decreasing with time until the end of December 2021 (15 weeks duration). A wide set of different instrumentation was deployed all over the Island in order to evaluate the effects of the volcanic plumes on the atmosphere and the air quality. For the first time, a long-term study of the relative mass contribution and vertical impact of the volcanic components, ash and non-ash particles separately, during the eruptive activity was carried out in this work. In particular, a polarized Micro-Pulse Lidar (P-MPL) was deployed at Tazacorte (at around 8 km west from the volcano) in 24/7 operation from October 17, 2021 until the end of the volcano activity (11 weeks) for vertical monitoring of the volcanic particles. First, a statistical study of the mass conversion factors for mass concentration estimation of the volcanic (ash and non-ash) particles was performed by using the AERONET sun/sky-photometer dataset at Fuencaliente (at around 18 km south from the volcano). A representative mass conversion factor was obtained for ash and non-ash particles: 1.89 ± 0.53 and 0.31 ± 0.06 g m−2, respectively, with no dependence on time and optical depth. Second, these factors were used to calculate the ash and non-ash mass concentrations from P-MPL observations. Ash particles dominated 11% of the time and mostly until week 3 (i.e. week 7 from the volcanic eruption). Their mass concentration decreased by one order of magnitude: the relative ash mass contribution was 73 ± 18% with a total mass loading of 566 ± 281 mg m−2 at week 1, reducing gradually down to 38 ± 32% and 120 ± 49 mg m−2, respectively, at week 11. Layer-to-layer, it decreased with increasing layer-height; no ash was detected above 4 km at the end of the volcanic period. Third, in order to analyse the potential AERONET underestimation of the coarse mass conversion factor due to the 15 μm cutoff effect in the AERONET retrieval, two worst-case-scenarios (WCS) were examined, representing aged-like ash particles (WCS1, 4-μm radius) and fresh-like (WCS2, 10-μm radius). For both scenarios, the mass concentration of the volcanic plumes exceeded the first contamination level (>200 μg m−3, as defined by the UK Meteorological Office) up to 5–6 km height mostly during week 1 and up to 1–2 km until week 9. The extreme contamination level (>2000 μg m−3, aircraft flight limitations) was only exceeded from week 1 to week 6 under WCS2 conditions. This work infers a new long-term insight on the volcanic matter injected in the atmosphere with relevance for Air Quality issues and air traffic safety policies., This research was funded by the Spanish Ministry of Science and Innovation (PID2020-118793GA-I00, PID2019-104205GB-C21/AEI/10.13039/501100011033, PID2019-103886RB-I00, and EQC2018-004686-P) and the Unit of Excellence “María de Maeztu” (MDM-2017-0737) and ACTRIS-Spain (CGL2017-90884-REDT) by the Spanish State Research Agency (AEI). The authors wish to thank the support from the H2020 program of the European Union and ACTRIS (GA n. 19ENV04, 654109, 778349, 871115, 101008004, and 101086690), and the European components of AERONET acting in the frame of ACTRIS RI, and also AEROSPAIN and Junta de Castilla y León (VA227P20) for supporting the calibration of the AERONET sun photometer used in this publication. M.Á.L.-C. and C.V.C.-P. are supported by the INTA predoctoral contract program. J. E. Welton and S. Stewart at NASA GSFC are acknowledged for their continuous help in keeping the MPL systems and the data analysis up to date., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vertical characterization of fine and coarse dust particles during an intense Saharan dust outbreak over the Iberian Peninsula in springtime 2021

  • López-Cayuela, María Ángeles
  • Córdoba-Jabonero, Carmen
  • Bermejo Pantaleón, Diego
  • Sicard, Michaël
  • Salgueiro, Vanda
  • Molero, Francisco
  • Carvajal-Pérez, Clara V.
  • Granados-Muñoz, María José
  • Comerón, Adolfo
  • Couto, Flavio T.
  • Barragán, Rubén
  • Zorzano, María Paz
  • Bravo-Aranda, J. A.
  • Muñoz-Porcar, Constantino
  • Costa, Maria João
  • Artíñano, Begoña
  • Rodríguez-Gómez, Alejandro
  • Bortoli, Daniele
  • Pujadas, Manuel
  • Abril-Gago, Jesús
  • Alados-Arboledas, Lucas
  • Guerrero-Rascado, Juan Luis
An intense and long-lasting Saharan dust outbreak crossed the Iberian Peninsula (IP) from the southwest (SW) to the northeast (NE) from 25 March until 7 April 2021. This work aims to assess the optical and mass contribution of both fine and coarse dust particles along their transport. Five Iberian lidar stations were monitoring the transport and evolution of the Saharan dust particles, i.e. El Arenosillo/Huelva, Granada, Torrejón/Madrid and Barcelona in Spain, and Évora in Portugal. The particular meteorological conditions determined the aerosol scenario along the overall dust event, differing in the first part of the event (25–31 March), in which the strongest dust incidence occurred on 29–31 March at the south and central stations and 1 April at Barcelona, from the second one (1–7 April). The use of the two-step POLIPHON algorithm showed the relevance of using polarized lidar measurements for separating the aerosol properties of dust fine and coarse particles as an added value. Both the fine dust (Df) and coarse dust (Dc) components of the total particle backscatter coefficient (total dust, DD = Dc + Df) were separately derived. The dust plume was well-mixed with height and no significant differences were found in the vertical structure of both the Dc and Df particle backscatter coefficients. From the beginning of the dust outbreak until 1 April, the vertical Df /DD mass ratio was nearly constant in time at each station and also in altitude with values of ∼ 10 %. Moreover, the mean dust optical depth at 532 nm was decreasing along that dust pathway, reporting values from SW to NE stations of 0.34 at El Arenosillo/Huelva, 0.28 at Granada, 0.20 at Évora, 0.28 at Torrejón/Madrid, and 0.14 at Barcelona, although its Df / DD ratio remained almost constant (28 %–30 %). A similar pattern was found for the total dust mass loading and its Df/ DD ratio, i.e. mostly decreasing mean mass values were reported, being constant in its Df /DD ratio (∼ 10 %) along the SW–NE dust pathway. In addition, the episode-mean centre-of-mass height increased with latitude overall, showing a high variability, being greater than 0.5 km at the southern sites (El Arenosillo/Huelva, Granada, Évora) and ∼ 1.0 km at Torrejón/Madrid and Barcelona. However, despite the relatively high intensity of the dust intrusion, the expected ageing of the dust particles was hardly observed, by taking into account the minor changes found in the contribution and properties of the coarse and fine dust particles. This is on the basis that the IP is relatively close to the Saharan dust sources and then, under certain dust transport conditions, any potential ageing processes in the dust particles remained unappreciated. The following must be highlighted: the different relative contribution of the fine dust particles to the total dust found for their optical properties (∼ 30 %) associated with the radiative effect of dust, with respect to that for the mass features (∼ 10 %) linked to air quality issues, along the overall dust event by crossing the IP., The authors are grateful for support from the Spanish Ministry of Science and Innovation (MICIN; grant nos. PID2020-117825GB-C21, PID2020-120015RB-I00, PID2019-104205GB-C21/AEI/10.13039/501100011033, PID2019-103886RB-I00/AEI/10.13039/501100011033, EQC2018-004686-P, CGL2017-90884-REDT, and CGL2017-85344-R), the Madrid Regional Government (grant no. Y2018/EMT-5177), the Andalusian Regional Government (grant nos. P20_00136 and P18-RT-3820), the University of Granada (grant no. A-RNM-430-UGR20, Singular Laboratory programme LS2022-1, Scientific Units of Excellence Program grant no. UCE-PP2017-02), and the EU H2020 programme (grant nos. 654109, 778349, 871115, 101008004, and 101086690). The EVO team is co-funded by Portuguese funds through the Fundação para a Ciência e a Tecnologia (FCT) within the framework of the ICT (grant nos. UIDB/04683/2020 and UIDP/04683/2020) and TOMAQAPA (grant no. PTDC/CTAMET/29678/2017) projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the retrieval of surface-layer parameters from lidar wind-profile measurements

  • Araújo da Silva, Marcos P.
  • Salcedo-Bosch, Andreu
  • Rocadenbosch, Francesc
  • Peña, Alfredo
This article belongs to the Section Atmospheric Remote Sensing., We revisit two recent methodologies based on Monin–Obukhov Similarity Theory (MOST), the 2D method and Hybrid-Wind (HW), which are aimed at estimation of the Obukhov length, friction velocity and kinematic heat flux within the surface layer. Both methods use wind-speed profile measurements only and their comparative performance requires assessment. Synthetic and observational data are used for their quantitative assessment. We also present a procedure to generate synthetic noise-corrupted wind profiles based on estimation of the probability density functions for MOST-related variables (e.g., friction velocity) and the statistics of the noise-corrupting perturbational amplitude found during an 82-day IJmuiden observational campaign. In the observational part of the study, 2D and HW parameter retrievals from floating Doppler wind lidar measurements are compared against those from a reference mast. Overall, the 2D algorithm outperformed the HW in the estimation of all the three parameters above. For instance, when assessing the friction-velocity retrieval performance with reference to sonic anemometers, determination coefficients of 𝜌22𝐷=0.77 and 𝜌2𝐻𝑊=0.33 were found under unstable atmospheric stability conditions, and 𝜌22𝐷=0.81 and 𝜌2𝐻𝑊=0.07 under stable conditions, which suggests the 2D algorithm as a prominent method for estimating the above-mentioned surface-layer parameters., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometrical and optical properties of cirrus clouds in Barcelona, Spain: analysis with the two-way transmittance method of 4 years of lidar measurements

  • Gil-Díaz, Cristina
  • Sicard, Michaël
  • Comerón, Adolfo
  • Fortunato dos Santos Oliveira, Daniel Camilo
  • Muñoz-Porcar, Constantino
  • Rodríguez-Gómez, Alejandro
  • Lewis, Jasper R.
  • Welton, Ellsworth J.
  • Lolli, Simone
In this paper a statistical study of cirrus geometrical and optical properties based on 4 years of continuous ground-based lidar measurements with the Barcelona (Spain) Micro Pulse Lidar (MPL) is analysed. First, a review of the literature on the two-way transmittance method is presented. This method is a well-known lidar inversion method used to retrieve the optical properties of an aerosol–cloud layer between two molecular (i.e. aerosol and cloudfree) regions below and above, without the need to make any a priori assumptions about their optical and/or microphysical properties. Second, a simple mathematical expression of the two-way transmittance method is proposed for both ground-based and spaceborne lidar systems. This approach of the method allows the retrieval of the cloud optical depth, the cloud column lidar ratio and the vertical profile of the cloud backscatter coefficient. The method is illustrated for a cirrus cloud using measurements from the ground-based MPL and from the spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). Third, the database is then filtered with a cirrus identification criterion based on (and compared to) the literature using only lidar and radiosonde data. During the period from November 2018 to September 2022, 367 high-altitude cirrus clouds were identified at 00:00 and 12:00 UTC, of which 203 were successfully inverted with the two-way transmittance method. The statistical results of these 203 high-altitude cirrus clouds show that the cloud thickness is 1.8 ± 1.1 km, the mid-cloud temperature is −51 ± 8◦C and the linear cloud depolarization ratio is 0.32 ± 0.13. The application of the transmittance method yields an average cloud optical depth (COD) of 0.36 ± 0.45 and a mean effective column lidar ratio of 30 ± 19 sr. Statistical results of the errors associated with the two-way transmittance method retrievals are also provided. The highest occurrence of cirrus is observed in spring and the majority of cirrus clouds (48 %) are visible (0.03 < COD < 0.3), followed by opaque (COD > 0.3) with a percentage of 38 %. Together with results from other sites, possible latitudinal dependencies have been analysed together with correlations between cirrus cloud properties. For example, we noted that in Barcelona the COD correlates positively with the cloud base temperature, effective column lidar ratio and linear cloud depolarization ratio and negatively with the cloud base height., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00) and the European Commission through the Horizon 2020 Programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349) and through the Horizon Europe Programme (project REALISTIC, grant agreement no. 101086690)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of optical scattering properties and direct radiative effects of high-altitude cirrus clouds in Barcelona, Spain, with 4 years of lidar measurements

  • Gil-Díaz, Cristina
  • Sicard, Michaël
  • Sourdeval, Odran
  • Saiprakash, Athulya
  • Muñoz-Porcar, Constantino
  • Comerón, Adolfo
  • Rodríguez-Gómez, Alejandro
  • Oliveira, Daniel
Cloud-radiation interaction still drives large uncertainties in climate models, and its estimation is key to make more accurate predictions. In this context, high-altitude cirrus clouds play a fundamental role because (1) they have a high occurrence frequency globally and (2) they are the only cloud that can readily cool or warm the atmosphere during daytime, depending on their properties. This study presents a comprehensive analysis of optical scattering properties and direct radiative effect of cirrus clouds based on 4 years of continuous groundbased lidar measurements with the Barcelona (Spain) Micro Pulse Lidar. First, we introduce a novel approach of a self-consistent scattering model for cirrus clouds to determine their optical scattering properties at different wavelengths using only the extinction coefficient and cloud temperature. Second, we calculate the direct radiative effects of cirrus clouds with the discrete ordinates method, and we validate our results with SolRad-Net pyranometers and NOAA-20 measurements. Third, we present a case study analysing the direct radiative effect of a cirrus cloud along its back-trajectory using data from the Chemical LAgrangian Model of the Stratosphere with microphysics scheme for Ice clouds formation (CLaMS-Ice). The results show that the cirrus clouds with an average ice water content of 4.97_5.53 mgm3, in the nighttime, have a positive direct radiative effect at the top of the atmosphere (TOA; C40:4Wm2) almost twice than at the bottom of the atmosphere (BOA; C22:1Wm2); in the daytime, they have generally a negative direct radiative effect at BOA (11:5Wm2, 82% of the cases) and always a positive effect at TOA (C14:2Wm2). In these simulations, the influence of the lower layer aerosols is negligible in the cirrus direct radiative effects, with a bias (denoted BIAS) of 1:2 %. For the case study, the net direct radiative effects produced by the cirrus cloud, are from 0 to C40Wm2 at TOA and from 51 to C20Wm2 at BOA. This study reveals that the complexity of the cirrus cloud direct radiative effect calculation lies in the fact that it is highly sensitive to the cirrus scene properties., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00 and PID2023-149747NB-I00) and the European Commission through the Horizon 2020 programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349; and project REALISTIC, grant agreement no. 101086690). Michäel Sicard also received funding from CNES through the EECLAT, AOS and EXTRA-SAT projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dust Aerosol Radiative Effects During a Dust Event and Heatwave in Summer 2019 Simulated with a Regional Climate Atmospheric Model over the Iberian Peninsula

  • Gil-Díaz, Cristina
  • Sicard, Michaël
  • Nabat, Pierre
  • Mallet, Marc
  • Muñoz-Porcar, Constantino
  • Comerón, Adolfo
  • Rodríguez-Gómez, Alejandro
  • Oliveira, Daniel
Mineral dust particles significantly influence the Earth’s climate through direct and semi-direct radiative effects. This study investigates these effects and their meteorological impacts during a dust intrusion and heatwave over the Iberian Peninsula in summer 2019 using a regional climate model. Three simulations with different spectral nudging configurations are evaluated. During the central period, the mean direct and semi-direct radiative effects in the shortwave spectrum at the top of the atmosphere (bottom of the atmosphere) are −0.4 ± 0.4 (−3.9 ± 2.3) Wm<sup>−2</sup> and +0.1 ± 1.7 (−0.1 ± 1.9) Wm<sup>−2</sup>, respectively. In the longwave spectrum, these effects are +0.1 ± 0.1 (+0.3 ± 0.1) WmWm<sup>−2</sup> and 0.0 ± 0.6 (+0.9 ± 1.1) Wm<sup>−2</sup>, respectively. The semi-direct effect mitigates 18.8% of the dust-induced warming in the full atmosphere and alters meteorological variables. The liquid water path decreases by −0.2 ± 4.5 mg m<sup>−2</sup>, the cloud fraction in the upper (lower) troposphere reduces (increases) by −0.2 ± 1.2 (+0.1 ± 1.3) %, and the near-surface air temperature drops slightly by −0.2 ± 0.2 °C. The results highlight substantial spatial variability and underscore the importance of considering semi-direct radiative effects in radiative analysis., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00 and PID2023-149747NB-I00), the European Commission through the Horizon 2020 Programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349), and through the Horizon Europe Programme (project REALISTIC, grant agreement no. 101086690). M. Sicard also received funding from CNES through the projects EECLAT, AOS and EXTRA-SAT., The ALADIN model is based at National Centre for Meteorological Research, and has been used with their kind permission. The authors acknowledge the support of the Spanish Ministery for Science, Innovation and Universities, “Red estratégica ACTRIS-ERIC Spain” (grants RED2022-134824-E and RED2024-153756-E)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determining the impact of new particle formation events on cloud condensation nuclei (CCN) concentrations

  • Casans, Andrea
  • Casquero-Vera, Juan Andrés
  • Rejano, Fernando
  • Lyamani, Hassan
  • Cazorla, A.
  • Zabala, I.
  • Huang, W.
  • Agro, M.
  • Barreto, África
  • Rodríguez González, Sergio
  • González, Yenny
  • Bianchi, F.
  • Petäjä, Tuukka
  • Olmo, Francisco José
  • Alados-Arboledas, Lucas
  • Cariñanos. P.
  • Gysel-Beer, M.
  • Titos, Gloria
Atmospheric aerosol particles act as cloud condensation nuclei (CCN) and play a crucial role in the climate system and hydrological cycle. New particle formation (NPF) events are a significant source of CCN, though their global contribution to the CCN budget remains uncertain. We propose a novel method to estimate the direct contribution of NPF events to CCN concentrations, distinguishing between NPF-generated particles and background or transported aerosols. Previous methods estimated CCN concentration enhancements by comparing CCN concentration at different times periods (during or after NPF events with CCN concentrations prior to the events or with non-event days). Our method overcomes this limitation by focusing on the ceiling size that newly formed particles can reach, the timing of NPF events, and isolating the NPF mode from the overall aerosol size distribution. The method was developed using size-resolved CCN measurements at the Sierra Nevada Station (SNS) in southeastern Spain (2500 m a.s.l.). We demonstrate that the method is also applicable to polydisperse CCN measurements, showing consistency across both variants. Additionally, it has been applied to NPF events at the Izaña Observatory (IZO) in Tenerife (Canary Islands, 2367 m a.s.l.). Both SNS and IZO frequently experience NPF events, though their environmental and aerosol characteristics differ, providing insights into the advantages and limitations of the method. Comparison between the two sites reveals that the mean NPF contribution to CCN is 6.2 ± 4.8 % (IQR = 9 %) at SNS and 24 ± 25 % (IQR = 28 %) at IZO. The higher NPF contribution at IZO is attributed to the ability of newly formed particles to grow to larger sizes and the presence of fewer transported boundary layer particles acting as CCN. Both sites show significant variability in the NPF contribution percentage due to the distinct characteristics of each NPF event., This work was partially supported by NUCLEUS project PID2021-128757OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and “European Union NextGenerationEU/PRTR” and BioCloud project RTI2018.101154.A.I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER “ERDF A way of making Europe”. This work received support from the European Union‘s Horizon 2020 research and innovation program through projects ACTRIS.IMP (grant agreement No 871115) and ATMO_ACCESS (grant agreement No 101008004), by the Spanish Ministry of Science and Innovation through projects ELPIS PID2020-120015RB-I00 MCIN/AEI /10.13039/501100011033 and ACTRIS-España RED2022-134824-E and by University of Granada Plan Propio through Singular Laboratory (LS2022-1) program. The work was also partially funded through EU projects FOCI (101056783), FORCeS (821205), CERTAINTY (101137680) and by Research Council of Finland via Atmosphere and Climate Competence Center (ACCC) Flagship (337549,3570902, 359340) and by University of Helsinki, Faculty of Science via ACTRIS-HY. It was also funded by grants BIOD22_001 and BIOD22_002, funded by Consejería de Universidad, Investigación e Innovación and Gobierno de España and Unión Europea – NextGenerationEU. Andrea Casans thanks Dr. Barbara Bertozzi (from PSI) for her dedication and help with Python programming and Dr. Elisabeth Andrews (from NOAA) for her English revision. Andrea Casans is funded by Spanish ministry of research and innovation under the predoctoral program FPI (PRE2019-090827) funded by MCIN/AEI/ 10.13039/501100011033, FSE “El FSE invierte en tu futuro”. Martin Gysel-Beer contributed to this study as part of ACTRIS-Switzerland funded by the Swiss State Secretariat for Education and Research and Innovation (SERI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ice nucleation activity of mineral dust from Morocco and Iceland in immersion freezing mode and its relationship with mineralogy and particle size

  • Vergara-Palacio, Sebastian
  • Kiselev, Alexei
  • Vogel, Franziska
  • González-Romero, Adolfo
  • Fösig, Romy
  • Querol, Xavier
  • Hoose, Corinna
  • Silas Umo, Nsikanabasi
  • Möhler, Ottmar
  • Kandler, Konrad
  • Pérez García-Pando, Carlos
  • Klose, Martina
Ice nucleation activity (INA) in the mixed-phase cloud (MPC) regime has been extensively studied. Nevertheless, most research has focused on particles smaller than a few micrometers, leaving the INA dependence on mineralogical composition and size poorly characterized for particles larger than ten micrometers in diameter. This gap is important because: (1) large mineral dust particles (LMDPs) can undergo long-range atmospheric transport and reach altitudes where MPCs form; (2) their mineralogical composition may differ from that of smaller particles, affecting the density of ice-active sites; and (3) larger particles are more susceptible to atmospheric aging through coatings by chemical and organic compounds, which can further modify their INA. Here, we used natural soil dust samples collected during field campaigns in Morocco and Iceland, covering particle sizes from fine to super-coarse dust and characterized in terms of mineralogical composition and size. The samples' INA was measured in the AIDA and AIDAm cloud chambers and the INSEKT and IR-DROFA freezing assays in more than 300 experiments. Moroccan samples exhibited INA comparable to that reported for K-feldspar in previous studies, with no dependence on particle size, consistent with the nearly constant K-feldspar fraction across all size bins. In contrast, Icelandic samples showed lower INA than in other studies using samples of similar composition, along with a subtle size dependence linked to the size-varying pyroxene content, which decreased with increasing particle size. Our findings elucidate the role of LMDPs in immersion freezing and their relationship with mineralogy and size for low- and high-latitude dust sources., Acknowledgements This work has received funding through the Helmholtz Association’s Initiative and Networking Fund (grant agreement no. VH-NG-1533). The MICOS campaign is part of a project that is supported by the European Commission under the Horizon 2020 – Research and Innovation Framework Program, H2020-INFRAIA-2020-1, Grant Agreement number: 101008004. We are grateful for campaign support from AIDA staff: Rainer Buschbacher, Olga Dombrowski, Georg Scheurig, and Robert Wagner; and members of the Barcelona Supercomputing Center (BSC): Montse Costa-Surós, and Marios Chaziparaschos. The samples used in this study were collected and analyzed in the context of the ERC Consolidator Grant FRAGMENT, funded by the European Research Council under the Horizon 2020 research and innovation programme (grant agreement no. 773051), and the HiLDA project funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)-417012665. This work used resources of the Deutsches Klimarechenzentrum (DKRZ) granted by its Scientific Steering Committee (WLA) under project ID 1215. CPGP also acknowledges support from the AXA Research fund, Grant PID2022-140365OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and the Horizon Europe programme under Grant Agreement No 101137680 via project CERTAINTY. Financial support This research has been supported by the Helmholtz-Gemeinschaft (grant no. VH-NG-1533), the European Commission, Horizon 2020 Framework Programme (grant no. 101008004), the European Commission, Horizon 2020 Framework Programme (grant no. 773051), the Deutsche Forschungsgemeinschaft (grant no. 417012665), and the AXA Research Fund and Grant PID2022-140365OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU. The article processing charges for this open-access publication were covered by the Karlsruhe Institute of Technology (KIT)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Aerosol radiative impact during the summer 2019 heatwave produced partly by an inter-continental Saharan dust outbreak – Part 2: Long-wave and net dust direct radiative effect

  • Sicard, Michaël|||0000-0001-8287-9693
  • Cordoba Jabonero, Carmen
  • López Cayuela, María Ángeles
  • Ansmann, Albert
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Zorzano, María-Paz
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
This paper is the companion paper of Córdoba-Jabonero et al. (2021). It deals with the estimation of the long-wave (LW) and net dust direct radiative effect (DRE) during the dust episode that occurred between 23 and 30 June 2019 and was paired with a mega-heatwave. The analysis is performed at two European sites where polarized micro-pulse lidars ran continuously to retrieve the vertical distribution of the dust optical properties: Barcelona, Spain, 23–30 June, and Leipzig, Germany, 29–30 June. The radiative effect is computed with the GAME (global atmospheric model) radiative transfer model separately for the fine- and coarse-mode dust. The instantaneous and daily radiative effect and radiative efficiency (DREff) are provided for the fine-mode, coarse-mode and total dust at the surface, top of the atmosphere (TOA) and in the atmosphere. The fine-mode daily LW DRE is low (<¿6¿% of the short-wave (SW) component), which makes the coarse-mode LW DRE the main modulator of the total net dust DRE. The coarse-mode LW DRE starts exceeding (in absolute values) the SW component in the middle of the episode, which produces positive coarse-mode net DRE at both the surface and TOA. Such an unusual tendency is attributed to increasing coarse-mode size and surface temperature throughout the episode. This has the effect of reducing the SW cooling in Barcelona up to the point of reaching total net positive dust DRE (+0.9¿W¿m-2) on one occasion at the surface and quasi-neutral (-0.6¿W¿m-2) at TOA. When adding the LW component, the total dust SW radiative efficiency is reduced by a factor of 1.6 at both surface (on average over the episode the total dust net DREff is -54.1¿W¿m-2¿t-1) and TOA (-37.3¿W¿m-2¿t-1). A sensitivity study performed on the surface temperature and the air temperature in the dust layer, both linked to the heatwave and upon which the LW DRE strongly depends, shows that the heatwave contributed to reducing the dust net cooling effect at the surface and that it had nearly no effect at TOA. Its subsequent effect was thus to reduce the heating of the atmosphere produced by the dust particles., This research was funded by the Spanish Ministry of Science, Innovation and Universities (CGL2017- 90884-REDT and PRX18/00137 “Salvador de Madariaga” program), the Spanish Ministry of Science and Innovation (PID2019-104205GB-C21 and PID2019-103886RB-I00), the H2020 program from the European Union (GA nos. 654109, 778349, 871115 and 101008004), and both Units of Excellence “María de Maeztu” (MDM-2016-0600 and MDM-2017-0737) financed by the Spanish State Research Agency (AEI). MALC is supported by the INTA predoctoral contract programme., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A Robust Adaptive Unscented Kalman Filter for floating Doppler Wind-LiDAR motion correction

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
This study presents a new method for correcting the six degrees of freedom motion-induced error in ZephIR 300 floating Doppler Wind-LiDAR-derived data, based on a Robust Adaptive Unscented Kalman Filter. The filter takes advantage of the known floating Doppler Wind-LiDAR (FDWL) dynamics, a velocity–azimuth display algorithm, and a wind model describing the LiDAR-retrieved wind vector without motion influence. The filter estimates the corrected wind vector by adapting itself to different atmospheric and motion scenarios, and by estimating the covariance matrices of related noise processes. The measured turbulence intensity by the FDWL (with and without correction) was compared against a reference fixed LiDAR over a 25-day period at “El Pont del Petroli”, Barcelona. After correction, the apparent motion-induced turbulence was greatly reduced, and the statistical indicators showed overall improvement. Thus, the Mean Difference improved from -1.70% (uncorrected) to 0.36% (corrected), the Root Mean Square Error (RMSE) improved from 2.01% to 0.86%, and coefficient of determination improved from 0.85 to 0.93., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“Comm- SensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Atmospheric stability classification from floating Doppler wind lidar measurements: a machine learning approach

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This work studies the capabilities of the k-nearest-neighbours (KNN) method to estimate the atmospheric stability from floating Doppler wind lidar measurements of the vertical wind profile. A procedure to generate synthetic wind profiles to be used as training data for the KNN is presented. The method is validated with experimental data gathered during IJmuiden campaign by a floating Doppler wind lidar against a metmast as a reference. A global hit rate of 70.2% is obtained when comparing the predicted stability classes to the reference ones., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Retrieving Monin-Obukhov dimensionless wind shear and stability from floating lidar observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Peña Diaz, Alfredo
Floating-lidar-derived wind profiles are used to retrieve the vertical wind speed gradient, dimensionless wind shear, and dimensionless stability using Monin-Obukhov similarity theory (MOST) in the context of IJmuiden campaign. Reference retrievals are obtained by applying the same methodology to metmast-derived wind profiles. Wind gradient estimates from floating lidar measurements are successfully compared to those from the reference metmast at three different heights, yielding coefficients of determination higher than ρ 2 = 0.83. MOST flux relationships are also re-encountered when representing the dimensionless wind shear estimates as a function of dimensionless stability., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the temperature stability requirements of free-running Nd:YAG lasers for atmospheric temperature profiling through the rotational Raman technique

  • Zenteno Hernández, José Alex
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Sicard, Michaël|||0000-0001-8287-9693
  • Franco, Noemi
  • Behrendt, Andreas
  • Di Girolamo, Paolo
We assess the temperature stability requirements of unseeded Nd:YAG lasers in lidar systems for atmospheric temperature profiling through the rotational Raman technique. Taking as a reference a system using a seeded laser assumed to emit pulses of negligible spectral width and free of wavelength drifts, we estimate first the effect of the pulse spectral widening of the unseeded laser on the output of the interference filters, and then we derive the limits of the allowable wavelength drift for a given bias in the temperature measurement that would add to the noise-induced uncertainty. Finally, using spectroscopic data, we relate the allowable wavelength drift to allowable temperature variations in the YAG rod. We find that, in order to keep the bias affecting atmospheric temperature measurements smaller than 1¿K, the Nd:YAG rod temperature should also be kept within a variation range of 1¿K., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Overlap-function correction of lidar-derived aerosol optical depth

  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Gil Díaz, Cristina
  • Sicard, Michaël|||0000-0001-8287-9693
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
Treball presentat a: 31st International Laser Radar Conference (ILRC 31), held together with the 22nd Coherent Laser Radar Conference (CLRC 22), We assess the feasibility of correcting the aerosol optical depth by measuring an overlap function from the combination of elastic and N2/O2 rotational-spectrum Raman signals in an advanced aerosol lidar. It is shown that very similar overlap functions can be derived from measurements taken in different days, leading to an extension of minimum range at which the aerosol optical depth can be measured. This opens the way to determining the aerosol extinction coefficient at ranges below the lidar full overlap with overlap functions measured in favorable conditions., Funding contribution of the H2020 projects ACTRIS IMP (grant agreement No 871115), ATMO-ACCESS (grant agreement No 101008004) and of the Catalan Regional Government grant 2021 SGR 01415, as well as the support of the Spanish Ministry for Science and Innovation to ACTRIS ERIC are gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Measurement report: Spectral and statistical analysis of aerosol hygroscopic growth from multi-wavelength lidar measurements in Barcelona, Spain

  • Sicard, Michaël|||0000-0001-8287-9693
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Gil Díaz, Cristina
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
This paper presents the estimation of the hygroscopic growth parameter of atmospheric aerosols retrieved with a multi-wavelength lidar, a micro-pulse lidar (MPL) and daily radiosoundings in the coastal region ofBarcelona, Spain. The hygroscopic growth parameter, γ , parameterizes the magnitude of the scattering enhancement in terms of the backscatter coefficient following Hänel parameterization. After searching for time-colocated lidar and radiosounding measurements (performed twice a day, all year round at 00:00 and 12:00 UTC), a strict criterion-based procedure (limiting the variations of magnitudes such as water vapor mixing ratio (WMVR), potential temperature, wind speed and direction) is applied to select only cases of aerosol hygroscopic growth. A spectral analysis (at the wavelengths of 355, 532 and 1064 nm) is performed with the multi-wavelength lidar, and a climatological one, at the wavelength of 532 nm, with the database of both lidars. The spectral analysis shows that below 2 km the regime of local pollution and sea salt γ decreases with increasing wavelengths. Sincethe 355 nm wavelength is sensitive to smaller aerosols, this behavior could indicate slightly more hygroscopic aerosols present at smaller size ranges. Above 2 km (the regime of regional pollution and residual sea salt) the values of γ at 532 nm are nearly the same as those below 2 km, and its spectral behavior is flat. This analysis and others from the literature are put together in a table presenting, for the first time, a spectral analysis of the hygroscopic growth parameter of a large variety of atmospheric aerosol hygroscopicities ranging from low (pure mineral dust, γ <0.2) to high (pure sea salt, γ > 1.0) hygroscopicity. The climatological analysis shows that, at 532 nm, γ is rather constant all year round and has a large monthly standard deviation, suggesting the presence of aerosols with different hygroscopic properties all year round. The annual γ is 0.55 ± 0.23. The height of the layer where hygroscopic growth was calculated shows an annual cycle with a maximum in summer and a minimum in winter. Former works describing the presence of recirculation layers of pollutants injected at various heights above the planetary boundary layer (PBL) may explain why γ , unlike the height of the layer where hygroscopic growth was calculated, is not season-dependent. The subcategorization of the whole database into No cloud and Below-cloud cases reveals a large difference of γ in autumn between both categories (0.71 and 0.33, respectively), possibly attributed to a depletion of inorganics at the point of activation into cloud condensation nuclei (CCN) in the Below-cloud cases. Our work calls for more in situ measurements to synergetically complete such studies based on remote sensing., This research was funded by the Spanish Ministry of Science and Innovation (grant nos. PID2019-103886RB-I00) and the H2020 program from the European Union (grant nos. 654109, 778349, 871115 and 101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the use of wind profiles to assess surface boundary-layer parameters

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Peña Diaz, Alfredo
Wind profiles measured at the research platform FINO1 are used to retrieve surface boundary-layer parameters, namely, the friction velocity, heat flux, and Obukhov length. The latter is used to assess atmospheric stability. Two different retrieval algorithms, the 2D parametric solver [1] and the Hybrid-Wind method [2], are compared with reference to sonic-anemometers retrievals. Regarding atmospheric stability classification, the 2D algorithm provided better performance than the Hybrid-Wind method. When comparing the 2D-estimated (HW-estimated) friction velocity to the anemometers’ reference, a determination coefficient of ρ 2 = 0.70 (ρ 2 = 0.00) were obtained., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRISIMP (GA-871115). Data was made available by the FINO (Forschungsplattformen in Nord- und Ostsee) initiative, which was funded by the German Federal Ministry of Economic Affairs and Climate Action (BMWK) on the basis of a decision by the German Bundestag, organised by the Projekttraeger Juelich (PTJ) and coordinated by the German Federal Maritime and Hydrographic Agency (BSH)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the retrieval of surface-layer parameters from lidar wind-profile measurements

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Peña Diaz, Alfredo
We revisit two recent methodologies based on Monin–Obukhov Similarity Theory (MOST), the 2D method and Hybrid-Wind (HW), which are aimed at estimation of the Obukhov length, friction velocity and kinematic heat flux within the surface layer. Both methods use wind-speed profile measurements only and their comparative performance requires assessment. Synthetic and observational data are used for their quantitative assessment. We also present a procedure to generate synthetic noise-corrupted wind profiles based on estimation of the probability density functions for MOST-related variables (e.g., friction velocity) and the statistics of the noise-corrupting perturbational amplitude found during an 82-day IJmuiden observational campaign. In the observational part of the study, 2D and HW parameter retrievals from floating Doppler wind lidar measurements are compared against those from a reference mast. Overall, the 2D algorithm outperformed the HW in the estimation of all the three parameters above. For instance, when assessing the friction-velocity retrieval performance with reference to sonic anemometers, determination coefficients of ρ2 2D = 0.77 and ρ2 HW = 0.33 were found under unstable atmospheric stability conditions, and ρ2 2D = 0.81 and ρ2 HW = 0.07 under stable conditions, which suggests the 2D algorithm as a prominent method for estimating the above-mentioned surface-layer parameters., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro“. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Overview: On the transport and transformation of pollutants in the outflow of major population centres – observational data from the EMeRGe European intensive operational period in summer 2017

  • Andrés Hernández, Maria Dolores
  • Hilboll, Andreas
  • Ziereis, Helmut
  • Förster, Eric
  • Krüger, Ovid O.
  • Kaiser, Katharina
  • Schneider, Johannes
  • Barnaba, Francesca
  • Vrekoussis, M
  • Sicard, Michaël|||0000-0001-8287-9693
Megacities and other major population centres (MPCs) worldwide are major sources of air pollution, both locally as well as downwind. The overall assessment and prediction of the impact of MPC pollution on tropospheric chemistry are challenging. The present work provides an overview of the highlights of a major new contribution to the understanding of this issue based on the data and analysis of the EMeRGe (Effect of Megacities on the transport and transformation of pollutants on the Regional to Global scales) international project. EMeRGe focuses on atmospheric chemistry, dynamics, and transport of local and regional pollution originating in MPCs. Airborne measurements, taking advantage of the long range capabilities of the High Altitude and LOng Range Research Aircraft (HALO, https://www.halo-spp.de, last access: 22 March 2022), are a central part of the project. The synergistic use and consistent interpretation of observational data sets of different spatial and temporal resolution (e.g. from ground-based networks, airborne campaigns, and satellite measurements) supported by modelling within EMeRGe provide unique insight to test the current understanding of MPC pollution outflows. In order to obtain an adequate set of measurements at different spatial scales, two field experiments were positioned in time and space to contrast situations when the photochemical transformation of plumes emerging from MPCs is large. These experiments were conducted in summer 2017 over Europe and in the inter-monsoon period over Asia in spring 2018. The intensive observational periods (IOPs) involved HALO airborne measurements of ozone and its precursors, volatile organic compounds, aerosol particles, and related species as well as coordinated ground-based ancillary observations at different sites. Perfluorocarbon (PFC) tracer releases and model forecasts supported the flight planning, the identification of pollution plumes, and the analysis of chemical transformations during transport. This paper describes the experimental deployment and scientific questions of the IOP in Europe. The MPC targets – London (United Kingdom; UK), the Benelux/Ruhr area (Belgium, the Netherlands, Luxembourg and Germany), Paris (France), Rome and the Po Valley (Italy), and Madrid and Barcelona (Spain) – were investigated during seven HALO research flights with an aircraft base in Germany for a total of 53 flight hours. An in-flight comparison of HALO with the collaborating UK-airborne platform Facility for Airborne Atmospheric Measurements (FAAM) took place to assure accuracy and comparability of the instrumentation on board. Overall, EMeRGe unites measurements of near- and far-field emissions and hence deals with complex air masses of local and distant sources. Regional transport of several European MPC outflows was successfully identified and measured. Chemical processing of the MPC emissions was inferred from airborne observations of primary and secondary pollutants and the ratios between species having different chemical lifetimes. Photochemical processing of aerosol and secondary formation or organic acids was evident during the transport of MPC plumes. Urban plumes mix efficiently with natural sources as mineral dust and with biomass burning emissions from vegetation and forest fires. This confirms the importance of wildland fire emissions in Europe and indicates an important but discontinuous contribution to the European emission budget that might be of relevance in the design of efficient mitigation strategies. The present work provides an overview of the most salient results in the European context, with these being addressed in more detail within additional dedicated EMeRGe studies. The deployment and results obtained in Asia will be the subject of separate publications., The HALO deployment during EMeRGe was funded by a consortium comprising the German Research Foundation (DFG) Priority Program HALO-SPP 1294, the Institute of Atmospheric Physics of DLR, the Max Planck Society (MPG), and the Helmholtz Association. Flora Kluge, Benjamin Schreiner, and Klaus Pfeilsticker acknowledge the support given by the DFG through the project nos. PF 384-16, PF 384-17, and PG 385-19. Ralf Koppmann and Marc Krebsbach acknowledge DFG funding through project no. KR3861_1-1. Katja Bigge acknowledges additional funding from the Heidelberg Graduate School for Physics. Johannes Schneider, Katharina Kaiser, and Stephan Borrmann acknowledge funding through the DFG (project no. 316589531). Lisa Eirenschmalz and Hans Schlager acknowledge support by DFG through project MEPOLL (SCHL1857/4-1). Anna B. Kalisz Hedegaard would like to thank DAAD and DLR for a Research Fellowship. Hans Schlager acknowledge financial support by the DLR TraK (Transport and Climate) project. Michael Sicard acknowledges support from the EU (GA nos. 654109, 778349, 871115, and 101008004) and the Spanish Government (ref. nos. CGL2017-90884-REDT, PID2019-103886RB-I00, RTI2018-096548-B-I00, and MDM-2016-0600). Midhun George, Yangzhuoran Liu, M. Dolores Andrés Hernández, and John Phillip Burrows acknowledge financial support from the University of Bremen. FLEXPART simulations were performed on the HPC cluster Aether at the University of Bremen, financed by DFG within the scope of the Excellence Initiative. Anne-Marlene Blechschmidt was partly funded through the CAMS-84 project. Jennifer Wolf acknowledges support from the German Federal Ministry for Economic Affairs and Energy – BMWi (project Digitally optimized Engineering for Services – DoEfS; contract no. 20X1701B). Theresa Harlass thanks DLR VOR for funding the young investigator research group “Greenhouse Gases”. Mariano Mertens, Patrick Jöckel, and Markus Kilian acknowledge resources of the Deutsches Klimarechenzentrum (DKRZ) granted by the WLA project ID bd0617 for the MECO(n) simulations and the financial support from the DLR projects TraK (Transport und Klima) and the Initiative and Networking Fund of the Helmholtz Association through the project “Advanced Earth System Modelling Capacity” (ESM). Bruna A. Holanda acknowledges the funding from Brazilian CNPq (process 200723/2015-4)., Peer Reviewed, Article signat per 53 autors/es: M. Dolores Andrés Hernández (1), Andreas Hilboll (2), Helmut Ziereis (3), Eric Förster (4), Ovid O. Krüger (5), Katharina Kaiser (6,7), Johannes Schneider (7), Francesca Barnaba (8), Mihalis Vrekoussis (2,18), Jörg Schmidt (9), Heidi Huntrieser (3), Anne-Marlene Blechschmidt (1), Midhun George (1), Vladyslav Nenakhov (1,a), Theresa Harlass (3), Bruna A. Holanda (5), Jennifer Wolf (3), Lisa Eirenschmalz (3), Marc Krebsbach (10), Mira L. Pöhlker (5,b), Anna B. Kalisz Hedegaard (3,2), Linlu Mei (1), Klaus Pfeilsticker (11), Yangzhuoran Liu (1), Ralf Koppmann (10), Hans Schlager (3), Birger Bohn (12), Ulrich Schumann (3), Andreas Richter (1), Benjamin Schreiner (11), Daniel Sauer (3), Robert Baumann (3), Mariano Mertens (3), Patrick Jöckel (3), Markus Kilian (3), Greta Stratmann (3,c,) Christopher Pöhlker (5), Monica Campanelli (8), Marco Pandolfi (13), Michael Sicard (14,15), José L. Gómez-Amo (16), Manuel Pujadas (17), Katja Bigge (11), Flora Kluge (11), Anja Schwarz (9), Nikos Daskalakis (2), David Walter (5), Andreas Zahn (4), Ulrich Pöschl (5), Harald Bönisch (4), Stephan Borrmann (6,7), Ulrich Platt (11), and John P. Burrows (1) // (1) Institute of Environmental Physics, University of Bremen, Bremen, Germany; (2) Laboratory for Modeling and Observation of the Earth System, Institute of Environmental Physics, Bremen, Germany; (3) Deutsches Zentrum für Luft- und Raumfahrt (DLR), Institut für Physik der Atmosphäre, Oberpfaffenhofen, Germany; (4) Atmospheric Trace Gases and Remote Sensing, Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research, Karlsruhe, Germany; (5) Multiphase Chemistry Department, Max Planck Institute for Chemistry, Mainz, Germany; (6) Institute for Atmospheric Physics, Johannes Gutenberg University, Mainz, Germany, (7) Particle Chemistry Department, Max Planck Institute for Chemistry, Mainz, Germany; (8) National Research Council of Italy, Institute of Atmospheric Sciences and Climate (CNR-ISAC), Rome, Italy; (9) Leipzig Institute for Meteorology, Leipzig University, Leipzig, Germany; (10) Institute for Atmospheric and Environmental Research, University of Wuppertal, Wuppertal, Germany; (11) Institute for Environmental Physics, University of Heidelberg, Heidelberg, Germany, (12) Institute of Energy and Climate Research IEK-8, Forschungszentrum Jülich, Jülich, Germany; (13) Consejo Superior de Investigaciones Científicas, Institute of Environmental Assessment and Water Research, Barcelona, Spain; (14) CommSensLab, Department of Signal Theory and Communications, Universitat Politècnica de Catalunya, Barcelona, Spain; (15) Ciències i Tecnologies de l’Espai-Centre de Recerca de l’Aeronàutica i de l’Espai/Institut d’Estudis Espacials de Catalunya), Universitat Politècnica de Catalunya, Barcelona, Spain; (16) Department of Earth Physics and Thermodynamics, University of Valencia, Burjassot, Spain; (17) Atmospheric Pollution Unit, Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (Ciemat), Madrid, Spain; (18) Climate and Atmosphere Research Center (CARE-C), The Cyprus Institute, Nicosia, Cyprus anow at: Flight Experiments, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Oberpfaffenhofen, Germany
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Synergistic mixed-layer height retrieval method using microwave radiometer and lidar ceilometer observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Saeed, Umar|||0000-0003-0261-2767
This paper tackles synergistic mixed-layer height (MLH) estimation via a combination of microwave radiometer (MWR) and lidar ceilometer (LC)-based estimates. While MLH-MWR estimates rely on potential temperature retrievals, MLH-LC estimates rely on aerosol gradients. The pros and cons of MLH retrievals obtained from MWR via the parcel method and from LC via an extended Kalman filter (EKF)-based method are used to motivate the synergistic algorithm. The synergistic algorithm is introduced as a maximum-likelihood combination of MLH-MWR and MLH-LC. Two case examples from the 2013 HOPE campaign at Jülich, Germany, are used to show the robustness of the synergistic method and the effect of surface temperature measurement error. Doppler wind lidar retrievals and radiosonde reference MLH estimates are used for validation., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER. Data were provided by Julich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of M.P.A.S was supported under Grant PRE2018-086054 funded by MCIN/AEI/ 10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fresh volcanic aerosols injected in the atmosphere during the volcano eruptive activity at the Cumbre Vieja area (La Palma, Canary Islands): Temporal evolution and vertical impact

  • Cordoba Jabonero, Carmen
  • Sicard, Michaël|||0000-0001-8287-9693
  • Barreto Velasco, África
  • Toledano, Carlos
  • López Cayuela, María Ángeles
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • García Rodríguez, Omaira
  • Carvajal Pérez, Clara Violeta
  • Gil Díaz, Cristina
  • Ramos López, Ramón
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
For the first time in fifty years, the Cumbre Vieja volcanic area (La Palma, Canary Islands, Spain) erupted on September 19, 2021, giving birth to a new volcano. Fresh volcanic aerosols were continuously injected into the troposphere at different height levels, decreasing with time until the end of December 2021 (15 weeks duration). A wide set of different instrumentation was deployed all over the Island in order to evaluate the effects of the volcanic plumes on the atmosphere and the air quality. For the first time, a long-term study of the relative mass contribution and vertical impact of the volcanic components, ash and non-ash particles separately, during the eruptive activity was carried out in this work. In particular, a polarized Micro-Pulse Lidar (P-MPL) was deployed at Tazacorte (at around 8 km west from the volcano) in 24/7 operation from October 17, 2021 until the end of the volcano activity (11 weeks) for vertical monitoring of the volcanic particles. First, a statistical study of the mass conversion factors for mass concentration estimation of the volcanic (ash and non-ash) particles was performed by using the AERONET sun/sky-photometer dataset at Fuencaliente (at around 18 km south from the volcano). A representative mass conversion factor was obtained for ash and non-ash particles: 1.89 ± 0.53 and 0.31 ± 0.06 g m-2, respectively, with no dependence on time and optical depth. Second, these factors were used to calculate the ash and non-ash mass concentrations from P-MPL observations. Ash particles dominated 11% of the time and mostly until week 3 (i.e. week 7 from the volcanic eruption). Their mass concentration decreased by one order of magnitude: the relative ash mass contribution was 73 ± 18% with a total mass loading of 566 ± 281 mg m-2 at week 1, reducing gradually down to 38 ± 32% and 120 ± 49 mg m-2, respectively, at week 11. Layer-to-layer, it decreased with increasing layer-height; no ash was detected above 4 km at the end of the volcanic period. Third, in order to analyse the potential AERONET underestimation of the coarse mass conversion factor due to the 15 µm cutoff effect in the AERONET retrieval, two worst-case-scenarios (WCS) were examined, representing aged-like ash particles (WCS1, 4-µm radius) and fresh-like (WCS2, 10-µm radius). For both scenarios, the mass concentration of the volcanic plumes exceeded the first contamination level (>200 µg m-3, as defined by the UK Meteorological Office) up to 5–6 km height mostly during week 1 and up to 1–2 km until week 9. The extreme contamination level (>2000 µg m-3, aircraft flight limitations) was only exceeded from week 1 to week 6 under WCS2 conditions. This work infers a new long-term insight on the volcanic matter injected in the atmosphere with relevance for Air Quality issues and air traffic safety policies., This research was funded by the Spanish Ministry of Science and Innovation (PID2020- 118793GA-I00, PID2019-104205GB-C21/AEI/10.13039/501100011 033, PID2019-103886RB-I00, and EQC2018-004686-P) and the Unit of Excellence “María de Maeztu” (MDM-2017-0737) and ACTRIS-Spain (CGL2017-90884-REDT) by the Spanish State Research Agency (AEI). The authors wish to thank the support from the H2020 program of the European Union and ACTRIS (GA n. 19ENV04, 654109, 778349, 871115, 101008004, and 101086690), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical solver for vertical air motion estimation

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Domínguez Pla, Paula
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Frasier, Stephen J.
We present preliminary research on a method to estimate Vertical Air Motion (VAM) at a particular height by comparing the measured rain-rate (RR) by a vertically-pointing S-band Frequency-Modulated Continuous-Wave (FMCW) radar with that of a ground-based disdrometer. The method is based on a constrained parametric solver, assuming high correlation between 5-min averaged rain rates measured by the radar and disdrometer. The method is tested over disdrometer and radar observations during the Verification of the ORigins Tornado EXperiment in South East US (VORTEX-SE) project. Finally, the results are partially validated by means of fitting a gamma distribution to the VAM-corrected DSD profiles and studying its parameters., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMOACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • González Marco, Daniel|||0000-0002-9619-1897
  • Peña Diaz, Alfredo
This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (Comm- SensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE in- vierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Retrieval of planetary boundary layer height from Calipso satellite: A big data and machine learning approach

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • López Martínez, Carlos|||0000-0002-1366-9446
This study presents a Random Forest (RF) model trained on an extensive dataset to estimate the planetary boundary layer height (PBLH) retrieved from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board of Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Level 1 measurements during both daytime and nighttime. The novelty of the method lies in the RF’s capability to automatically classify the observed scenarios, enabling P BLH estimation in cloudy, multi-layer, and dust-laden conditions across diverse global regions. The RF model was trained using 10 years of CALIOP data, with radiosonde-derived P BLH retrievals coinciding with CALIPSO overpasses serving as ground truth. The results demonstrate that the RF model surpasses existing state-of-the-art methods in spatial and temporal coverage, achieving a correlation coefficient (R2 = 0.6) and root-mean-square error (RMSE) of 333.60 m, without requiring atmospheric typing, data filtering, or additional ancillary information., This research is part of the project PID2021-126436OB-C21, funded by MInisterio de Ciencia, Innovación y Universidades (MICIU)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and ERDF/EU, and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministero dell’Università e della Ricerca. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRISIMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Retrieval of planetary boundary layer height from CALIPSO satellite observations using a machine learning approach

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Argañaraz, Carina Inés
  • Curci, Gabriele
  • Lolli, Simone
The planetary boundary layer height (PBLH) is a key variable in air quality, climate modeling, and weather prediction. Traditional retrieval methods, such as radiosondes, provide high accuracy but lack spatial coverage. This study presents a Random Forest (RF) model based on Machine Learning (ML) to estimate PBLH from ten years of Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), using radiosonde measurements as a reference. The model achieves an R2 of 0.67 and an RMSE of 278.02 m with a spatial resolution of ˜ 20 × 20 km2 in a test set that covers mainly Europe and North America. Unlike previous methods, our approach does not require atmospheric typing and uses minimal data filtering, demonstrating robustness under diverse aerosol and cloud conditions. Although validation is currently limited to mid-latitude regions, the method offers a scalable approach to global monitoring and supports the management of climate and air quality. Future work will extend the validation to other geographic zones and explore deep learning models for further improvements., The authors acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on 14.9.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title PBLhsat CUP P20224AT3 W Grant Assignment Decree No. 965 adopted on 30 June 2023 by the Italian Ministry of University and Research (MUR) and the research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 y FEDER ‘‘Una manera de hacer Europa’’. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A straightforward atmospheric-radar simulator for vertical-air-motion analysis from frequency-modulated continuous-wave-radar rain measurements

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • García García, Alicia
  • Lolli, Simone
  • Tanamachi, Robin
  • Frasier, Stephen J.
This research is part of the projects PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación / Agencia Estatal de Investigación /10.13039/501100011033/FEDER "Una manera de hacer Europa" and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministerio dell'Università e della Ricerca". The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004). The MIRSL contributed the mobile S-band radar. MIRSL and EAPS collected and provided the UMASS FMCW data under their respective VORTEX-SE NOAA grants (NA18OAR4590313)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental assessment of the CNRM-ALADIN64 model with lidar and passive measurements during the dust and heatwave event in the Iberian Peninsula in July 2019

  • Gil Díaz, Cristina
  • Sicard, Michaël|||0000-0001-8287-9693
  • Nabat, Pierre
  • Mallet, Marc
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
An evaluation of the CNRM-ALADIN64 [1] model simulation with dust aerosols is carried out during the dust event and heatwave in the Iberian Peninsula in summer 2019. The model performance is assessed against a variety of observational datasets. In particular, the total aerosol AOD is evaluated across different AERONET stations using both VIIRS satellite data and AERONET measurements. Shortwave downward (SW DW) radiative flux is compared with SolRad-Net observations at the Barcelona lidar station, while longwave upward (LW UP) radiative flux is assessed using CERES data over the Iberian Peninsula. Additionally, the vertical distribution of dust extinction is also evaluated with the Barcelona MLPNET lidar., This work was funded by MICIU/AEI/ 10.13039/501100011033 grant PID2023-149747NB-I00 and H2020-INFRAIA2020-1, ATMO-ACCESS, grant no. 10100800 [sic]., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Parameterization of the inherent averaging of Doppler wind lidars: A Mann model simulator approach

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Lolli, Simone
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • López Martínez, Carlos|||0000-0002-1366-9446
  • Mann, Jakob
  • Peña Diaz, Alfredo
This work presents a simulator approach to quantify and parametrize the inherent averaging error in wind turbulence measurements by Doppler Wind Lidars (DWL). The simulator replicates the instrumental setup of the IJmuiden campaign, which included an offshore meteorological mast with a DWL and an anemometer measuring wind at the same height as a reference (90 m a.s.l.). The Mann turbulence model was used to simulate wind turbulence boxes with a wide range of turbulence conditions, enabling the quantification of measurement errors as a function of the turbulence spectral characteristics via the Mann model parameters. The study found that only the Mann turbulence length scale (LMM) affected the DWL measurement of turbulence. Additionally, the inherent averaging error for the IJmuiden setup was parameterized using an analytical function, significantly reducing the computational effort required to retrieve it., This research is part of the project PID2021-126436OB-C21, funded by MInisterio de Ciencia, Innovación y Universidades (MICIU)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and ERDF/EU, and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministero dell’Università e della Ricerca. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRISIMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analytical-model compensation of the motion-induced turbulence in floating Doppler-wind Lidar measurements

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This work presents a novel method to statistically compensate for the apparent motion-induced turbulence in floating Doppler-Wind LiDAR measurements. The method relies on the analytical model [1], recently published by the authors, applied to the ZephIR T M 300 continuous-wave LiDAR. Performance of the method is studied over two floating LiDAR measurement sites/configurations, a mild near-offshore Mediterranean site and an open-sea site (IJmuiden, North Sea), and compared to fixed LiDAR measurements as a reference. The method outperforms other motion compensation approaches based on turbulence increment estimation with less computational effort., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An explicit formulation for the retrieval of the overlap function in an elastic and Raman aerosol lidar

  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Sicard, Michaël|||0000-0001-8287-9693
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
We derive an explicit (i.e., non-iterative) formula for the retrieval of the overlap function in an aerosol lidar with both elastic and Raman N2 and/or O2 channels used for independent measurements of aerosol backscatter and extinction coefficients. The formula requires only the measured, range-corrected elastic and the corresponding Raman signals, plus an assumed lidar ratio. We assess the influence of the lidar ratio error in the overlap function retrieval and present retrieval examples., This research has been supported by the Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00) as well as the H2020 Environment (grant nos. 871115 and 101008004) and the H2020 Excellent Science (grant no. 778349) programs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the feasibility of radial spatial averaging to improve satellite Synthetic Aperture Radar ocean wind retrievals

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Lolli, Simone
  • Escalera i Mendo, Aina
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • López Martínez, Carlos|||0000-0002-1366-9446
This work focuses on the feasibility of radial spatial av-eraging to improve satellite Synthetic Aperture Radar (SAR) ocean Horizontal Wind Speed (HWS) retrievals even in neu-tral atmosphere situations. The reference for comparison are in-situ HWS measurements from the FINO-1 offshore metmast. The data used from the Sentinel-1 SAR are the Level 2 Ocean (OCN) products for wind, wave, and current applications, retrieving the information from the Ocean Wind Field (OWI) component through Geophysical Model Func-tion (GMF) CMOD-IFR2. The GMF allows for estimation of the equivalent wind speed at 10 meters and, therefore, stable and convective regimes can bias the estimations. The best agreement between SAR and FINO-1 was found -as expected- for neutral atmospheres, which yielded a determi-nation coefficient of R2 = 0.90 and a root mean squared error (RMSE) of 1.2 m/s. In non-neutral scenarios, statisti-cal indicators showed that fine-tuned spatial averaging is also able to improve SAR HWS retrievals and yielded comparable statistical indicators (R2 = 0.87, RMSE = 1.1 m/s) for the HWS estimates., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa” and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministero dell’Universita e della Ricerca. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Geometrical and optical properties of cirrus clouds in Barcelona, Spain: analysis with the two-way transmittance method of 4 years of lidar measurements

  • Gil Díaz, Cristina
  • Sicard, Michaël|||0000-0001-8287-9693
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Lewis, Jasper R.
  • Welton, Ellsworth J.
  • Lolli, Simone
In this paper a statistical study of cirrus geometrical and optical properties based on 4 years of continuous ground-based lidar measurements with the Barcelona (Spain) Micro Pulse Lidar (MPL) is analysed. First, a review of the literature on the two-way transmittance method is presented. This method is a well-known lidar inversion method used to retrieve the optical properties of an aerosol–cloud layer between two molecular (i.e. aerosol and cloud-free) regions below and above, without the need to make any a priori assumptions about their optical and/or microphysical properties. Second, a simple mathematical expression of the two-way transmittance method is proposed for both ground-based and spaceborne lidar systems. This approach of the method allows the retrieval of the cloud optical depth, the cloud column lidar ratio and the vertical profile of the cloud backscatter coefficient. The method is illustrated for a cirrus cloud using measurements from the ground-based MPL and from the spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). Third, the database is then filtered with a cirrus identification criterion based on (and compared to) the literature using only lidar and radiosonde data. During the period from November 2018 to September 2022, 367 high-altitude cirrus clouds were identified at 00:00 and 12:00 UTC, of which 203 were successfully inverted with the two-way transmittance method. The statistical results of these 203 high-altitude cirrus clouds show that the cloud thickness is 1.8 ± 1.1 km, the mid-cloud temperature is −51 ± 8 ∘C and the linear cloud depolarization ratio is 0.32 ± 0.13. The application of the transmittance method yields an average cloud optical depth (COD) of 0.36 ± 0.45 and a mean effective column lidar ratio of 30 ± 19 sr. Statistical results of the errors associated with the two-way transmittance method retrievals are also provided. The highest occurrence of cirrus is observed in spring and the majority of cirrus clouds (48 %) are visible (0.03 < COD < 0.3), followed by opaque (COD > 0.3) with a percentage of 38 %. Together with results from other sites, possible latitudinal dependencies have been analysed together with correlations between cirrus cloud properties. For example, we noted that in Barcelona the COD correlates positively with the cloud base temperature, effective column lidar ratio and linear cloud depolarization ratio and negatively with the cloud base height., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019103886RB-I00) and the European Commission through the Horizon 2020 Programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349) and through the Horizon Europe Programme (project REALISTIC, grant agreement no. 101086690)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The MONARCH high-resolution reanalysis of desert dust aerosol over Northern Africa, the Middle East and Europe (2007–2016)

  • di Tomaso, Enza
  • Escribano Alisio, Jeronimo
  • Basart Alpuente, Sara
  • Macchia, Francesca|||0000-0003-4952-5994
  • Benincasa, Francesco
  • Bretonnière, Pierre-Antoine|||0000-0002-3066-6685
  • Buñuel, Arnau
  • Castrillo Melguizo, Miguel
  • Gonçalves Ageitos, María|||0000-0003-3857-6403
  • Jorba Casellas, Oriol|||0000-0001-5872-0244
  • Klose, Martina|||0000-0001-8190-3700
  • Montané Pinto, Gilbert
  • Obiso, Vincenzo
  • Olid García, Miriam
  • Pérez García-Pando, Carlos|||0000-0002-4456-0697
One of the challenges in studying desert dust aerosol along with its numerous interactions and impacts is the paucity of direct in situ measurements, particularly in the areas most affected by dust storms. Satellites typically provide column-integrated aerosol measurements, but observationally constrained continuous 3D dust fields are needed to assess dust variability, climate effects and impacts upon a variety of socio-economic sectors. Here, we present a high-resolution regional reanalysis data set of desert dust aerosols that covers Northern Africa, the Middle East and Europe along with the Mediterranean Sea and parts of central Asia and the Atlantic and Indian oceans between 2007 and 2016. The horizontal resolution is 0.1◦ latitude × 0.1◦ longitude in a rotated grid, and the temporal resolution is 3 h. The reanalysis was produced using local ensemble transform Kalman filter (LETKF) data assimilation in the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (MONARCH) developed at the Barcelona Supercomputing Center (BSC). The assimilated data are coarse-mode dust optical depth retrieved from the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue Level 2 products. The reanalysis data set consists of upper-air variables (dust mass concentrations and the extinction coefficient), surface variables (dust deposition and solar irradiance fields among them) and total column variables (e.g. dust optical depth and load). Some dust variables, such as concentrations and wet and dry deposition, are expressed for a binned size distribution that ranges from 0.2 to 20 µm in particle diameter. Both analysis and first-guess (analysis-initialized simulation) fields are available for the variables that are diagnosed from the state vector. A set of ensemble statistics is archived for each output variable, namely the ensemble mean, standard deviation, maximum and median. The spatial and temporal distribution of the dust fields follows well-known dust cycle features controlled by seasonal changes in meteorology and vegetation cover. The analysis is statistically closer to the assimilated retrievals than the first guess, which proves the consistency of the data assimilation method. Independent evaluation using Aerosol Robotic Network (AERONET) dust-filtered optical depth retrievals indicates that the reanalysis data set is highly accurate (mean bias = −0.05, RMSE = 0.12 and r = 0.81 when compared to retrievals from the spectral de-convolution algorithm on a 3-hourly basis). Verification statistics are broadly homogeneous in space and time with regional differences that can be partly attributed to model limitations (e.g. poor representation of small-scale emission processes), the presence of aerosols other than dust in the observations used in the evaluation and differences in the number of observations among seasons. Such a reliable high-resolution historical record of atmospheric desert dust will allow a better quantification of dust impacts upon key sectors of society and economy, including health, solar energy production and transportation. The reanalysis data set (Di Tomaso et al., 2021) is distributed via Thematic Real-time Environmental Distributed Data Services (THREDDS) at BSC and is freely available at http://hdl.handle.net/21.12146/c6d4a608-5de3-47f6-a004-67cb1d498d98 (last access: 10 June 2022)., This research has been supported by the DustClim project, which is part of ERA4CS, an ERA-NET programme co-funded by the European Union’s Horizon 2020 research and innovation programme (grant no. 690462); the European Research Council (FRAGMENT (grant no. 773051)); grant no. RYC-2015- 18690 funded by MCIN/AEI/10.13039/501100011033 and ESF Investing in your future; grant no. CGL2017-88911-R funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; the AXA Research Fund (AXA Chair on Sand and Dust Storms); the European Commission, Horizon 2020 Framework Programme (grant no. 792103 (SOLWARIS)); and ATMO-ACCESS (Access to Atmospheric Research Facilities) funded in the frame of the programme H2020-EU.1.4.1.2 (grant no. 101008004, 1 April 2021–31 March 2025). Jerónimo Escribano and Martina Klose have received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreements H2020-MSCACOFUND-2016-754433 and H2020-MSCA-IF-2017-789630, respectively. Martina Klose received further support through the Helmholtz Association’s Initiative and Networking Fund (grant no. VH-NG-1533). This work has been partially funded by the contribution agreement between AEMET and BSC to carry out development and improvement activities of the products and services supplied by the World Meteorological Organization (WMO) Barcelona Dust Regional Center (i.e. the WMO Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS) Regional Center for Northern Africa, the Middle East and Europe)., Peer Reviewed, Article signat per 24 autors/es: Enza Di Tomaso (1) , Jerónimo Escribano (1) , Sara Basart (1) , Paul Ginoux (2) , Francesca Macchia (1) , Francesca Barnaba (3) , Francesco Benincasa (1), Pierre-Antoine Bretonnière (1), Arnau Buñuel (1), Miguel Castrillo (1), Emilio Cuevas (4) , Paola Formenti (5) , María Gonçalves (1,6), Oriol Jorba (1), Martina Klose (1,7), Lucia Mona (8), Gilbert Montané Pinto (1) , Michail Mytilinaios (8), Vincenzo Obiso (1,a), Miriam Olid (1), Nick Schutgens (9) , Athanasios Votsis (10,11), Ernest Werner (12), and Carlos Pérez García-Pando (1,13) // (1) Barcelona Supercomputing Center (BSC), Barcelona, Spain; (2) NOAA Geophysical Fluid Dynamics Laboratory, Princeton, New Jersey, USA; (3) Consiglio Nazionale delle Ricerche–Istituto di Scienze dell’Atmosfera e del Clima (CNR–ISAC), Rome, Italy; (4) Izaña Atmospheric Research Center (IARC), Agencia Estatal de Meteorología (AEMET), Santa Cruz de Tenerife, Spain; (5) Université Paris Cité and Univ Paris-Est Créteil, CNRS, LISA, 75013 Paris, France; (6) Department of Project and Construction Engineering, Universitat Politècnica de Catalunya – BarcelonaTech (UPC), Terrassa, Spain; (7) Department Troposphere Research, Institute of Meteorology and Climate Research (IMK-TRO), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; (8) Consiglio Nazionale delle Ricerche–Istituto di Metodologie per l’Analisi Ambientale (CNR–IMAA), Tito Scalo (PZ), Italy; (9) Department of Earth Sciences, Vrije Universiteit Amsterdam, 1081 HV Amsterdam, the Netherlands; (10) Section of Governance and Technology for Sustainability (BMS-CSTM), University of Twente, Enschede, the Netherlands; (11) Weather and Climate Change Impact Research, Finnish Meteorological Institute (FMI), Helsinki, Finland; (12) Agencia Estatal de Meteorología (AEMET), Barcelona, Spain; (13) ICREA, Catalan Institution for Research and Advanced Studies, Barcelona, Spain anow at: NASA Goddard Institute for Space Studies (GISS), New York, New York, USA, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Climatological assessment of the vertically resolved optical and microphysical aerosol properties by lidar measurements, sun photometer, and in situ observations over 17 years at Universitat Politècnica de Catalunya (UPC) Barcelona

  • Lolli, Simone
  • Sicard, Michaël|||0000-0001-8287-9693
  • Amato, Francesco
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Gil Díaz, Cristina
  • Landi, Tony C.
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Alastuey Urós, Andrés
  • Querol Carceller, Xavier
  • Reche Andúgar, Cristina
Aerosols are one of the most important pollutants in the atmosphere and have been monitored for the past few decades by remote sensing and in situ observation platforms to assess the effectiveness of government-managed reduction emission policies and assess their impact on the radiative budget of the Earth's atmosphere. In fact, aerosols can directly modulate incoming short-wave solar radiation and outgoing long-wave radiation and indirectly influence cloud formation, lifetime, and precipitation. In this study, we quantitatively evaluated long-term temporal trends and seasonal variability from a climatological point of view of the optical and microphysical properties of atmospheric particulate matter at the Universitat Politècnica de Catalunya (UPC), Barcelona, Spain, over the past 17 years, through a synergy of lidar, sun photometer, and in situ concentration measurements. Interannual temporal changes in aerosol optical and microphysical properties are evaluated through the seasonal Mann–Kendall test. Long-term trends in the optical depth of the recovered aerosol; the Ångström exponent (AE); and the concentrations of PM10, PM2.5, and PM1 reveal that emission reduction policies implemented in the past decades were effective in improving air quality, with consistent drops in PM concentrations and optical depth of aerosols. The seasonal analysis of the 17-year average vertically resolved aerosol profiles obtained from lidar observations shows that during summer the aerosol layer can be found up to an altitude of 5 km, after a sharp decay in the first kilometer. In contrast, during the other seasons, the backscatter profiles fit a pronounced exponential decay well with a well-defined scale height. Long-range transport, especially dust outbreaks from the Sahara, is likely to occur throughout the year. During winter, the dust aerosol layers are floating above the boundary layer, while during the other seasons they can penetrate the layer. The analysis also revealed that intense, short-duration pollution events during winter, associated with dust outbreaks, have become more frequent and intense since 2016. This study sheds some light on the meteorological processes and conditions that can lead to the formation of haze and helps decision makers adopt mitigation strategies to preserve large metropolitan areas in the Mediterranean basin., This research has been supported by the European Union through NextgenerationEU funds and by the following projects along the years: FP5 EARLINET project (grant no. ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004), projects of the Spanish National Research programs (grant nos. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754- C02-02/CLI, REN2003-09753-C02-C02/CLI, REN2003-09753- C02-C CGL2008-01330-E/CLI 02/CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149- E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project (grant no. 21487/08/NL/HE), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Floating lidar assessment of atmospheric stability in the North Sea

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • González Marco, Daniel|||0000-0002-9619-1897
  • Peña Diaz, Alfredo
In this work, the 2D parametric-solver algorithm [1] used to assess atmospheric stability from floating Doppler wind lidar (FDWL) measurements is revisited. The algorithm performance is studied using data from IJmuiden campaign. Mast-measured temperature and wind-speed provided the reference parameters used to evaluate the performance of the stability estimation algorithm. From 5,922 10-min samples available, the algorithm classified the atmosphere as stable (52% of the cases), neutral (31%) and unstable (17%), which successfully agreed with the mast-derived reference classification (53%, 30% and 17%, respectively)., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Estimation of the mass concentration of volcanic ash using ceilometers: study of fresh and transported plumes from la palma volcano

  • Bedoya Velásquez, Andrés Esteban
  • Hoyos Restrepo, Manuela
  • Barreto Velasco, África
  • García Cabrera, Rosa Delia
  • Romero Campos, Pedro Miguel
  • García Rodríguez, Omaira
  • Ramos López, Ramón
  • Roininen, Reijo
  • Toledano, Carlos
  • Sicard, Michaël|||0000-0001-8287-9693
  • Ceolato, Romain
This study presents a synergistic approach to the study of the aerosol optical and microphysical properties measured in La Palma, Spain, during the 2021 eruption of the Cumbre Vieja volcano (from 19 September to 13 December 2021). This study aims to characterize the different phases of the volcanic eruption using the spatio-temporal evolution of the event together with the mass concentration quantification of four different atmospheric layers. The impact of the plume’s pathway that reached the South of France is analyzed. Here, passive and active remote sensors were used, namely CL51 and CL61 ceilometers and AERONET sunphotometers. The attenuated backscattering ranged from 0.8 to 9.1 × 10-6 (msr)-1 and the volume depolarization ratio measured nearby the volcano was up to 0.3. The ash plume remained within the first 4 km agl, with intense episodes that reached mean aerosol optical depth values of up to 0.4. Thirteen study cases were selected where coarse mode was dominant over fine mode. For the data selection, the fine and coarse lidar ratios found were 3.9 ± 0.8 and 21.0 ± 3.8 sr in the north and 6.9 ± 1.8 and 30.1 ± 10.3 sr in the south. The ash mass concentration reached moderate levels with maximum values of up to 313.7 µ gm., This work was financially supported by ONERA within the framework of the PROMETE project 2017–2021; the Spanish Ministry of Science and Innovation (PID2019-103886RB-I00nAEI n10.13039n501100011033); and the H2020 program from the European Union (GA no. 654109, 778349, 871115, 101008004 and 101086690)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dust aerosol radiative effects during a dust event and heatwave in summer 2019 simulated with a regional climate atmospheric model over the Iberian Peninsula

  • Gil Díaz, Cristina
  • Sicard, Michaël|||0000-0001-8287-9693
  • Nabat, Pierre
  • Mallet, Marc
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
Mineral dust particles significantly influence the Earth’s climate through direct and semi-direct radiative effects. This study investigates these effects and their meteorological impacts during a dust intrusion and heatwave over the Iberian Peninsula in summer 2019 using a regional climate model. Three simulations with different spectral nudging configurations are evaluated. During the central period, the mean direct and semi-direct radiative effects in the shortwave spectrum at the top of the atmosphere (bottom of the atmosphere) are -0.4 ± 0.4 (-3.9 ± 2.3) Wm-2 and +0.1 ± 1.7 (-0.1 ± 1.9) Wm-2, respectively. In the longwave spectrum, these effects are +0.1 ± 0.1 (+0.3 ± 0.1) WmWm-2 and 0.0 ± 0.6 (+0.9 ± 1.1) Wm-2, respectively. The semi-direct effect mitigates 18.8% of the dust-induced warming in the full atmosphere and alters meteorological variables. The liquid water path decreases by -0.2 ± 4.5 mg m-2, the cloud fraction in the upper (lower) troposphere reduces (increases) by -0.2 ± 1.2 (+0.1 ± 1.3) %, and the near-surface air temperature drops slightly by -0.2 ± 0.2 °C. The results highlight substantial spatial variability and underscore the importance of considering semi-direct radiative effects in radiative analysis., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00 and PID2023-149747NB-I00), the European Commission through the Horizon 2020 Programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349), and through the Horizon Europe Programme (project REALISTIC, grant agreement no. 101086690). M. Sicard also received funding from CNES through the projects EECLAT, AOS and EXTRA-SAT., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quality control of Doppler spectra from a vertically pointing, S-band profiling radar

  • Belak, Susan L.
  • Tanamachi, Robin
  • Asel, Matthew L.
  • Dennany, Grant
  • Gnanasambandam, Abhiram
  • Frasier, Steve
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This study describes a novel combination of methods to remove spurious spectral peaks, or “spurs,” from Doppler spectra produced by a vertically pointing, S-band radar. The University of Massachusetts S-band frequency-modulated, continuous-wave radar (UMass FMCW) was deployed to monitor the growth of the CBL over northern Alabama during the VORTEX–Southeast field campaign in 2016. The Doppler spectra contained spurs caused by high-voltage switching power supplies in the traveling wave tube amplifier. In the original data processing scheme for this radar, a median filtering method was used to eliminate most of the spurs, but the largest ones persisted, which significantly degraded the quality of derived radar moments (e.g., reflectivity, Doppler velocity, and spectrum width) and hindered further analysis of these data (e.g., hydrometeor classification and boundary layer height tracking). Our technique for removing the spurs consists of three steps: (i) a Laplacian filter identifies and masks peaks in the spectra that are characteristic of the spurs in shape and amplitude, (ii) an in-painting method then fills in the masked area based on surrounding data, and (iii) the moments data (e.g., reflectivity, Doppler velocity, and spectrum width) are then recomputed using a coherent power technique. This combination of techniques was more effective than the median filter at removing the largest spurs from the Doppler spectra, and preserved more of the underlying Doppler spectral structure of the scatterers. Performance of both the median-filter and the in-painting methods are assessed through statistical analysis of the spectral power differences. Downstream products, such as boundary layer height detection, are more easily derived from the recomputed moments., This work was funded by NOAA grants NA18OAR4590313 and NA19OAR4590209. Dr. Stanley H. Chan and Dr. Andrew Pazmany advised us on the in-painting and CP techniques, respectively. The statements, findings, conclusions, and recommendations are those of the authors and do not necessarily reflect the views of the NOAA or the U.S. Department of Commerce. Dr. Rocadenbosch contributed the CBL detection algorithm via project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 and EU project H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS): The European research infrastructure supporting atmospheric science

  • Laj, Paolo
  • Lund Myhre, Cathrine
  • Riffault, Véronique
  • Amiridis, Vassilis
  • Fuchs, Hendrik
  • Eleftheriadis, Konstantinos
  • Petaja, Tuukka
  • Salameh, Thérèse
  • Kivekäs, Niku
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
The Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS) officially became the 33rd European Research Infrastructure Consortium (ERIC) on 25 April 2023 with the support of 17 founding member and observer countries. As a pan-European legal organization, ACTRIS ERIC will coordinate the provision of data and data products on short-lived atmospheric constituents and clouds relevant to climate and air pollution over the next 15–20 years. ACTRIS was designed more than a decade ago, and its development was funded at national and European levels. It was included in the European Strategy Forum on Research Infrastructures (ESFRI) roadmap in 2016 and, subsequently, in the national infrastructure roadmaps of European countries. It became a landmark of the ESFRI roadmap in 2021. The purpose of this paper is to describe the mission of ACTRIS, its added value to the community of atmospheric scientists, providing services to academia as well as the public and private sectors, and to summarize its main achievements. The present publication serves as a reference document for ACTRIS, its users, and the scientific community as a whole. It provides the reader with relevant information and an overview on ACTRIS governance and services, as well as a summary of the main scientific achievements of the last 20 years. The paper concludes with an outlook on the upcoming challenges for ACTRIS and the strategy for its future evolution. The Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS) is the new European Research Infrastructure Consortium for short-lived atmospheric constituents and clouds, supporting fundamental research and excellence in Earth system observation. The primary objective of ACTRIS is to produce high-quality integrated datasets in the field of atmospheric sciences and to provide services, including access to instrumented platforms, tailored for scientific and technological use. Established with a long-term perspective, with financial commitments from 17 European countries and the European Commission, ACTRIS services are open to the global community of scientists involved in atmospheric research and beyond. It is expected that ACTRIS will have a strong impact enhancing excellence in Earth system observation and research, providing information and knowledge for the development of sustainable solutions to societal needs., The construction of ACTRIS received funding from the European Commission through a number of projects from FP6 to Horizon Europe: ACTRIS-PPP, Grant Agreement (GA) 739530, ACTRIS IMP GA 871115, EUROCHAMP-2020 GA 730997, ACTRIS-2 GA 654109, and ACTRIS GA 262254. The access to the ACTRIS infrastructure got support from ATMO-ACCESS GA 101008004. ACTRIS benefitted from the contract established with Copernicus-ECMWF (CAMS21a, CAMS21b, and CAMS27) and the European Space Agency (FRM4DOAS) and ECMWF-Copernicus (CAMS-27) to support the implementation of the central data processing, QA/QC system, and procedure for NRT and RRT data production. In addition, ACTRIS was established thanks to support to national ACTRIS activities in Austria by the Austrian Federal Ministry of Education, Science and Research and in Belgium by the Belgian Science Policy, Federal and Walloon RPO. The FTIR monitoring program at Jungfraujoch was further supported by the GAW-CH program of MeteoSwiss (Zürich, CH), in Bulgaria by the Ministry of Education and Science of Bulgaria (support for ACTRIS BG, part of the Bulgarian National Roadmap for Research Infrastructure) and in Cyprus by the Deputy Ministry of Research, Innovation, and Digital Transition; the establishment and the operation of the ERATOSTHENES CoE NF are supported by “EXCELSIOR”: ERATOSTHENES: EΧcellence Research Centre for Earth Surveillance and Space-Based Monitoring of the Environment H2020 Widespread Teaming project. The project has received funding from the EU H2020 under GA 857510 and from the Government of the Republic of Cyprus through the Directorate General for the European Programmes, Coordination and Development and the Cyprus University of Technology. In the Czech Republic (CR), the operation costs for the implementation of ACTRIS-CZ and respective NFs were covered by the projects for the support of large research infrastructures (ACTRIS-CZ—LM2015037, LM2018122, and LM2023030) funded by the Czech Ministry of Education, Youth and Sports of the Czech Republic. ACTRIS-CZ NF instrumentation upgrades were supported by the European Structural and Investment Funds (Projects ACTRIS-CR RI, CZ.02.1.01/ 0.0/0.0/16_013/0001315, and ACTRIS-CZ RI 2, CZ.02.1.01/0.0/0.0/18_046/0015968). The costs connected with the implementation of ACTRIS-CZ CF unit were funded by the Czech Ministry of Environment (MOSKAL, CZ.05.2.32/0.0/0.0/18_098/000905). In Denmark, the Ministry of Higher Education and Science funded ACTRIS-DK (Project 5072-00032B). In Finland, ACTRIS-FI projects for the implementation of ACTRIS-FI NFs and ACTRIS TC Units of University of Helsinki are funded by Research Council of Finland [Grants 328616, 328617, and 328823 (INAR RI/ACTRIS-FI 2020–2024); 329274 (ACTRIS CFs 2020–2024); and 345510, 345527, and 345528 (INAR RI 2022–2025)] and the funding from the Ministry of Transport and Communications. The Atmosphere and Climate Competence Center Flagship funding by the Research Council of Finland (Grants 337549, 337552, 337550, and 337551) and Jane and Aatos Erkko Foundation funding. In France, ACTRIS-FR receives support from the French Ministry of Higher Education and Research, the French National Centre for Scientific Research (CNRS), and 22 further French research performing organizations composing the ACTRIS-FR consortium and contributing to its activities. ACTRIS activities benefit from national funding managed by the French National Research Agency (ANR) under the “Investments for the Future Programme (PIA)” (EQUIPEX OBS4CLIM; Grant ANR-21-ESRE-0013). In Germany, the implementation of ACTRIS-D is funded by the Federal Ministry of Education and Research (BMBF) under the FONA Strategy “Research for Sustainability.” The operation of the CFs is supported by the Federal Ministry for the Environment, Nature Conservation, Nuclear Safety and Consumer Protection (BMUV). Contributions of the German Meteorological Service (DWD) are funded by the Federal Ministry of Digital and Transport (BMDV). The implementation and operation of ACTRIS-D are co-funded by 11 German research performing organizations. In Greece, ACTRIS-GR is funded by the project “PANhellenic infrastructure for Atmospheric Composition and climatE change” (MIS 5021516), implemented under the Action “Reinforcement of the Research and Innovation Infrastructure,” funded by the Operational Programme “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–20), and co-financed by Greece and the European Union (European Regional Development Fund). In Italy, ACTRIS-IT is funded by the Italian Ministry of University and Research through the Ordinary Fund (FOE), with the project (Grant 893/2019) for the implementation of ACTRIS-IT funded by the European Regional Development Fund through the Competitiveness Operational Programme 2014–20, Action II.1, and with the project (Grant 1719/2020) to strengthen ACTRIS-IT human capital. ACTRIS is also supported by the Italian research performing organization composing the national consortium. In the Netherlands, ACTRIS-NL is supported by the Ministry of Infrastructure and Water Management, and Ruisdael Observatory, a large-scale scientific research infrastructure, which is financed by the Dutch Research Council (NWO; Grant 184.034.015). In Norway, ACTRIS-NO (Pr. 322247) and ACTRIS-ESFRI (Pr. 320886) are funded by the FORINFRA infrastructure program of the Research Council of Norway. In Poland, support was provided by the National Information Processing Institute–National Research Institute (OPI-BIP) within the Smart Growth Operational Programme (POIR.04.02.00-00-D019/20); the National Science Center of Poland (NCN) within DAINA-2 (2020/38/L/ST10/00480), Weave-UNISONO (2021/03/Y/ST10/00206), Preludium BIS-2 (2020/39/O/ST10/03586), Preludium 19 (2020/37/N/ST10/02682), and Preludium 15 (2018/29/N/ST10/02628); the Polish Foundation of Science and Technology (FNiTP) grant (519/FNITP/115/2010); and the Ministry of Education and Science of Poland (MEiN) within the Maintenance of Specialized Research Infrastructures (7/E-340/SPUB/SP/2020). In Romania, ACTRIS-RO is supported by the European Regional Development Fund through the Competitiveness Operational Programme 2014–20, Action 1.1.3 Creating synergies with H2020 Programme, project Strengthen the participation of the ACTRIS-RO consortium in the pan-European Research Infrastructure ACTRIS, ACTRIS-ROC, MYSMIS code 107596 (ctr. 337/2021), and the Core Program within the Romanian National Research Development and Innovation Plan 2022–27, carried out with the support of MCID, Project PN 23 05. In Spain, ACTRIS-SP acknowledges the support of the Ministry for Science and Innovation to ACTRIS ERIC and the contribution of many projects of the State Research Agency (AEI), as well as of funding programs of several regional governments. In Sweden, ACTRIS Sverige is supported by the Swedish Research Council, Project ID: 2021-00177_VR. In Switzerland, financial support for ACTRIS-CH NFs and CF Units during 2021–24 is provided by the Swiss State Secretariat for Education and Research and Innovation (SERI). ACTRIS observations at Jungfraujoch receive support from the Swiss Federal Office for the Environment (FOEN) via the CLIMAGS-CH program, the Federal Office of Meteorology and Climatology MeteoSwiss through the GAW-CH program, and the International Foundation High Altitude Research Stations Jungfraujoch and Gornergrat (HFSJG). Observations at Payerne are supported by the Federal Office of Meteorology and Climatology MeteoSwiss through the GAW-CH program, with MeteoSwiss providing the base infrastructure at the Payerne observatory. For the station in Beromünster, funding comes from FOEN through the Swiss National Air Pollution Monitoring Network (NABEL). Partners within the ACTRIS-CH consortium support ACTRIS implementation with their own funds. In the United Kingdom, financial support is provided by the Natural Environment Research Council (NERC), the National Centre for Atmospheric Science (NCAS), and the Centre for Ecology and Hydrology (CEH)., Peer Reviewed, Article signar per 68 autors/es: Paolo Laj,a,b; Cathrine Lund Myhre,c; Véronique Riffault,d; Vassilis Amiridis,e; Hendrik Fuchs,f,g; Konstantinos Eleftheriadis,h; Tuukka Petäjä,b ;Thérèse Salameh,d ;Niku Kivekäs,i,j; Eija Juurola,i,j; Giulia Saponaro,i,j; Sabine Philippin,k; Carmela Cornacchia,l; Lucas Alados Arboledas,m; Holger Baars,n; Anja Claude,o; Martine De Mazière,p; Bart Dils,p; Marvin Dufresne,d; Nikolaos Evangeliou,c; Olivier Favez,q; Markus Fiebig,c; Martial Haeffelin,r; Hartmut Herrmann,n; Kristina Höhler,s; Niklas Illmann,t; Axel Kreuter,u,v; Elke Ludewig,w; Eleni Marinou,e; Ottmar Möhler,s; Lucia Mona,l; Lise Eder Murberg,c; Doina Nicolae,x; Anna Novelli,f; Ewan O’Connor,j; Kevin Ohneiser,n; Rosa Maria Petracca Altieri,l; Bénédicte Picquet-Varrault,y; Dominik van Pinxteren,n; Bernhard Pospichal,z; Jean-Philippe Putaud,aa; Stefan Reimann,ab; Nikolaos Siomos,ac; Iwona Stachlewska,ad; Ralf Tillmann,f; Kalliopi Artemis Voudouri,e; Ulla Wandinger,n; Alfred Wiedensohler,n; Arnoud Apituley,ae; Adolfo Comerón,af; Martin Gysel-Beer,ag; Nikolaos Mihalopoulos,e,ah; Nina Nikolova,ai; Aleksander Pietruczuk,aj; Stéphane Sauvage,d; Jean Sciare,ak; Henrik Skov,al; Tove Svendby,c; Erik Swietlicki,am; Dimitar Tonev,ai; Geraint Vaughan,an,ao; Vladimir Zdimal,ap; Urs Baltensperger,ag; Jean-François Doussin,y; Markku Kulmala,b; Gelsomina Pappalardo,l; Sanna Sorvari Sundet,aq and Milan Vana,ar / AFFILIATIONS: a Université Grenoble-Alpes, CNRS, IRD, INP, INRAE, IGE, Grenoble, France; b Institute for Atmospheric and Earth System Research/Physics, University of Helsinki, Helsinki, Finland; c The Climate and Environmental Research Institute NILU, Kjeller, Norway; d IMT Nord Europe, Institut Mines-Télécom, Université Lille, Centre for Energy and Environment, Lille, France; e National Observatory of Athens, Athens, Greece; f Institute of Energy and Climate Research, IEK-8: Troposphere, Forschungszentrum Jülich GmbH, Jülich, Germany; g Department of Physics, University of Cologne, Cologne, Germany; h Environmental Radioactivity and Aerosol Technology for Atmospheric and Climate ImpacT Lab, INRaSTES, National Centre for Scientific Research Demokritos, Attiki, Greece; i ACTRIS ERIC, Helsinki, Finland; j Finnish Meteorological Institute, Helsinki, Finland; k Centre National de Recherche Scientifique, Laboratoire de Météorologie Physique, Aubière, France; l Consiglio Nazionale delle Ricerche-Istituto di Metodologie per l’Analisi Ambientale, Tito Scalo, Italy; m Andalusian Institute for Earth System Research (IISTA-CEAMA), University of Granada, Granada, Spain; n Leibniz Institute for Tropospheric Research (TROPOS), Leipzig, Germany; o Meteorological Observatory Hohenpeissenberg, Deutscher Wetterdienst, Hohenpeissenberg, Germany; p Royal Belgian Institute for Space Aeronomy (BIRA-IASB), Brussels, Belgium; q Institut National de l’Environnement Industriel et des Risques, Verneuil-en-Halatte, France; r Institut Pierre Simon Laplace, CNRS, Institut Polytechnique de Paris, Palaiseau, France; s Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research, Eggenstein-Leopoldshafen, Germany; t Institute for Atmospheric and Environmental Research, University of Wuppertal, Wuppertal, Germany; u Medical University of Innsbruck, Innsbruck, Austria; v LuftBlick OG, Innsbruck, Austria; w GeoSphere Austria, Department Sonnblick Observatory, Vienna, Austria; x National Institute of R&D for Optoelectronics, Măgurele, Romania; y Université Paris Est Créteil and Université Paris Cité, CNRS, LISA, Créteil, France; z Institute for Geophysics and Meteorology, University of Cologne, Cologne, Germany; aa European Commission, Joint Research Centre, Ispra, Varese, Italy; ab Empa, Laboratory for Air Pollution/Environmental Technology, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland; ac Ludwig-Maximilian University of Munich, Munich, Germany; ad University of Warsaw, Faculty of Physics, Institute of Geophysics, Warsaw, Poland; ae Royal Netherlands Meteorological Institute (KNMI), De Bilt, Netherlands; af CommSensLab, Department TSC, Universitat Politècnica de Catalunya, Barcelona, Spain; ag Paul Scherrer Institute, Laboratory of Atmospheric Chemistry, Villigen, Switzerland; ah University of Crete, Heraklion, Greece; ai Institute for Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences, Sofia, Bulgaria; aj Institute of Geophysics Polish Academy of Sciences, Warsaw, Poland; ak Climate and Atmosphere Research Center, The Cyprus Institute, Nicosia, Cyprus; al Department of Environmental Science, Aarhus University, iCLIMATE, ARC, Aarhus, Denmark; am Department of Physics, Lund University, Lund, Sweden; an National Centre for Atmospheric Science, Leeds, United Kingdom; ao University of Manchester, Manchester, United Kingdom; ap Institute of Chemical Process Fundamentals of CAS, Prague, Czech Republic; aq Natural Resources Institute, Helsinki, Finland; ar Czech Hydrometeorological Institute, Prague, Czech Republic
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Vertical air motion retrieval from frequency-modulated continuous-wave-radar rain measurements

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • García García, Alicia
  • López Martínez, Carlos|||0000-0002-1366-9446
  • Tanamachi, Robin
  • Dawson, Daniel
  • Frasier, Steve
Vertically pointing S-band Doppler radars measure reflectivity-velocity spectra, where the falling velocity of raindrops appears as a shift along the velocity axis. However, in convective rain scenarios, vertical air motion (VAM) introduces errors into radar-derived products, including drop size distribution, rain rate, and reflectivity factor. This study presents an enhanced forward-model retrieval method for estimating VAM velocity and retrieving these radar products. The forward estimator employs a parameterized Gamma distribution and an unknown VAM velocity to estimate the radar-observed aliased reflectivity-velocity profile. Building on previous work by the authors, this paper introduces a mathematical formulation for the aliased radar reflectivity along with first application of the method to a real measurement case from VORTEX-SE 2017 campaign., This research is part of the project PID2021-126436OB-C21, funded by MInisterio de Ciencia, Innovación y Universidades (MICIU)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and ERDF/EU, and part of the PRIN 2022 PNRR, project P20224AT3W funded by Ministero dell’Università e della Ricerca. The European Commission collaborated under project H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Study of optical scattering properties and direct radiative effects of high-altitude cirrus clouds in Barcelona, Spain, with 4 years of lidar measurements

  • Gil Díaz, Cristina
  • Sicard, Michaël|||0000-0001-8287-9693
  • Sourdeval, Odran
  • Saiprakash, Athulya
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
Cloud–radiation interaction still drives large uncertainties in climate models, and its estimation is key to make more accurate predictions. In this context, high-altitude cirrus clouds play a fundamental role because (1) they have a high occurrence frequency globally and (2) they are the only cloud that can readily cool or warm the atmosphere during daytime, depending on their properties. This study presents a comprehensive analysis of optical scattering properties and direct radiative effect of cirrus clouds based on 4 years of continuous groundbased lidar measurements with the Barcelona (Spain) Micro Pulse Lidar. First, we introduce a novel approach of a self-consistent scattering model for cirrus clouds to determine their optical scattering properties at different wavelengths using only the extinction coefficient and cloud temperature. Second, we calculate the direct radiative effects of cirrus clouds with the discrete ordinates method, and we validate our results with SolRad-Net pyranometers and NOAA-20 measurements. Third, we present a case study analysing the direct radiative effect of a cirrus cloud along its back-trajectory using data from the Chemical LAgrangian Model of the Stratosphere with microphysics scheme for Ice clouds formation (CLaMS-Ice). The results show that the cirrus clouds with an average ice water content of 4.97 ± 5.53 mg m-3 , in the nighttime, have a positive direct radiative effect at the top of the atmosphere (TOA; +40.4 W m-2 ) almost twice than at the bottom of the atmosphere (BOA; +22.1 W m-2 ); in the daytime, they have generally a negative direct radiative effect at BOA (-11.5 W m-2 , 82 % of the cases) and always a positive effect at TOA (+14.2 W m-2 ). In these simulations, the influence of the lower layer aerosols is negligible in the cirrus direct radiative effects, with a bias (denoted BIAS) of -1.2 %. For the case study, the net direct radiative effects produced by the cirrus cloud, are from 0 to +40 W m-2 at TOA and from -51 to +20 W m-2 at BOA. This study reveals that the complexity of the cirrus cloud direct radiative effect calculation lies in the fact that it is highly sensitive to the cirrus scene properties., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00 and PID2023-149747NB-I00) and the European Commission through the Horizon 2020 programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349; and project REALISTIC, grant agreement no. 101086690). Michäel Sicard also received funding from CNES through the EECLAT, AOS and EXTRA-SAT projects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of the accuracy of the aerosol optical and microphysical retrievals by the GRASP algorithm from combined measurements of a polarized sun-sky-lunar photometer and a three-wavelength elastic lidar

  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Sicard, Michaël|||0000-0001-8287-9693
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Gil Díaz, Cristina
  • Lolli, Simone
  • Dubovik, Oleg
  • Lopatin, Anton
  • Herrera, Milagros Estefania
  • Herreras Giralda, Marcos
The versatile Generalized Retrieval of Aerosol and Surface Properties (GRASP) algorithm exploits the advantages of synergic ground-based aerosol observations such as radiometric (sensitive to columnar aerosol optical and microphysical properties) and lidar (sensitive to vertical distribution of the optical properties) observations. The synergy is possible when the complementary data is mutually constrained by GRASP parametrization that includes, for the first time ever, the degree of linear polarization (DoLP) parameter measured by a polarized sun-sky-lunar AERONET photometer (380, 440, 500, 675, 870, 1020, and 1640 nm) in synergy with the vertical profiles from an elastic lidar (355, 532, and 1064 nm). First, a series of numerical tests is performed using simulated data generated using a climatology of data and ground-based measurements. The inversions are performed with and without random noise for five different combinations of input data, starting from the AERONET-like dataset and increasing to the complex one by adding more information for three aerosol scenarios: I—high aerosol optical depth (AOD) with dominant coarse mode; II—low AOD with dominant coarse mode; III—high AOD with dominant fine mode. The inclusion of DoLP improves (i) the retrieval accuracy of the fine-mode properties when it is not dominant; (ii) the retrieval accuracy of the coarse-mode properties at longer wavelengths and that of the fine-mode properties at shorter wavelengths; (iii) the retrieval accuracy of the coarse-mode real part of the refractive index (up to 36% reduction), but has no effect on the retrieval of the imaginary part; (iv) reduces up to 83% the bias of the sphere fraction (SF) retrieval in coarse-mode dominated regimes; and (v) the root mean square error (RMSE) of the retrieval for most of the parameters in all scenarios. In addition, the addition of more photometer channels in synergy with a three-wavelength elastic lidar reduces the RMSE for the real part (67% in the coarse mode) and the imaginary part (35% in the fine mode) of the refractive index, the single scattering albedo (38% in the fine mode), the lidar ratio (20% in the coarse mode), and the SF (43%)., Funding: This research was funded by: the Spanish Ministry of Science and Innovation (grant no. PID2019-103886RB-I00); H2020 (grant nos. 654109, 778349, 871115 and 101008004); and Horizon Europe REALISTIC project (grant no. 101086690)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of atmospheric aerosol properties using lidar measurements and their impact on radiative budget in Barcelona over the past 20 years

  • Lolli, Simone
  • Sicard, Michaël|||0000-0001-8287-9693
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Landi, Tony C.
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
Aerosols are significant atmospheric constituents that modulate radiation and cloud processes. We evaluated 17-year aerosol profile trends in Barcelona, Spain, from lidar measurements. In summer aerosol reaches 5 km, while in the other seasons it exhibits clear exponential decay. Sahara dust transport affects all seasons, with winter layers above and others penetrating the boundary layer. This study informs the formation of haze and urban preservation strategies in the Mediterranean. The analysis puts in evidence that the averaged net radiative effect is of cooling at both surface level and top of the atmosphere., This work has been made possible through the efforts of many people, whom it would be too long to mention, and the funding of many grants through the years, in particular European projects of different framework programmes (FP5 EARLINET project (ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004)), projects of the Spanish National Research Programmes (refs. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754-C02-02 / CLI, REN2003-09753-C02-C02 / CLI, REN2003-09753-C02-C CGL2008- 01330-E/CLI 02 / CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149-E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project No. nº 21487/08/NL/HE. The support of the European Union through NextGenerationEU funds is also gratefully acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Use of pure rotational Raman channels for lidar measurement of aerosol extinction coefficient: the EARLINET/ACTRIS Barcelona station experience

  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Zenteno Hernández, José Alex
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Dios Otín, Víctor Federico|||0000-0002-6720-8514
  • Sicard, Michaël|||0000-0001-8287-9693
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Mandal, Charly
Advances in interference filter technology permit currently using selected parts of the N2 and O2 pure rotational Raman spectra with very low temperature sensitivity, while rejecting sufficiently the elastic return. The Raman technique to retrieve the aerosol extinction coefficient can then be used with higher signal-to-noise ratios, because of a higher (about 8 times) effective differential backscatter cross-section as compared to the cross-section of the N2 vibro-rotational spectra. The design and results of pure rotational Raman channels at 354 nm and 530 nm allowing daytime aerosol extinction measurements implemented at the EARLINET/ACTRIS Barcelona lidar station are presented and discussed. © 2022 SPIE., The authors acknowledge the funding of this research by the Spanish Ministry for Science and Innovation for the project PID2019-103886RB-I00 and its support to ACTRIS ERIC. The authors also acknowledge the support of the European Commission through the Horizon 2020 Research and Innovation Framework Programme projects ACTRIS IMP (grant agreement No 871115) and ATMO-ACCESS (grant agreement No 101008004), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the performance of the unscented Kalman filter for floating Doppler wind lidar motion correction in an open-sea scenario

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This work analyzes the influence of open-sea wave motion on the performance of the floating Doppler wind lidar motion-compensation method [1], recently published by the authors. The method is applied to a floating ZephIR 300 LiDAR and compared to a fixed LiDAR as a reference. The motion-correction results are studied as a function of the wave-motion intensity by clustering the IJmuiden experimental campaign into three categories: low, medium, and high motion., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to -0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Understanding the impact of turbulence on floating lidar measurements

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Peña Diaz, Alfredo
  • Mann, Jakob
  • Lolli, Simone
Retrieving accurate turbulence intensity from motion-corrupted floating lidar measurements is one of the main challenges of the offshore wind energy industry today. Toward overcoming this challenge, this work describes a method to retrieve the motion-corrected turbulence intensity from floating lidar measurements. The method relies on an atmospheric turbulence model combined with lidar-based flow characteristics estimates. The method simulates floating-lidar and anemometer-like measurements via synthetically-generated wind fields in turbulence boxes. We highlight the importance of accurate modeling of turbulence-box parameters to virtually eliminate motion-induced error. The proposed method was successfully tested over a 3-month campaign at IJmuiden by comparing floating-lidar turbulence measurements against those from measurements from a reference meteorological mast., This work was supported in part by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa” under Project PID2021-126436OB-C21, in part by the PRIN 2022 PNRR, in part by the Ministero dell’Università e della Ricerca under Project P20224AT3W, and in part by the European Commission Collaboration under Project H2020 ATMOACCESS (GA-101008004) and Project H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A unified formulation for the computation of the six-degrees-of-freedom-motion-induced errors in floating Doppler wind LiDARs

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Farré Guarné, Joan
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This work presents an analytical formulation to assess the six-degrees-of-freedom-motion-induced error in floating Doppler wind LiDARs (FDWLs). The error products derive from the horizontal wind speed bias and apparent turbulence intensity. Departing from a geometrical formulation of the FDWL attitude and of the LiDAR retrieval algorithm, the contributions of the rotational and translational motion to the FDWL-measured total error are computed. Central to this process is the interpretation of the velocity–azimuth display retrieval algorithm in terms of a first-order Fourier series. The obtained 6 DoF formulation is validated numerically by means of a floating LiDAR motion simulator and experimentally in nearshore and open-sea scenarios in the framework of the Pont del Petroli and IJmuiden campaigns, respectively. Both measurement campaigns involved a fixed and a floating ZephIRTM 300 LiDAR. The proposed formulation proved capable of estimating the motion-induced FDWL horizontal wind speed bias and returned similar percentiles when comparing the FDWL with the fixed LiDAR. The estimations of the turbulence intensity increment statistically matched the FDWL measurements under all motional and wind scenarios when clustering the data as a function of the buoy’s mean tilt amplitude, mean translational-velocity amplitude, and mean horizontal wind speed., This research project was part of the project PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On adaptive unscented Kalman filtering for floating Doppler wind-lidar motion correction: Effect of the number of lidar measurement heights

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
This work studies the influence of the number of lidar measurement heights on the performance of the floating Doppler wind lidar motion-correction algorithm, recently published by the authors. The work is in the context of offshore wind energy and continuous-wave focusable ZephirTM 300 lidar. A downsampling technique applied over the lidar-measured wind speed time-series is used to simulate different height-sounding configurations. The operation of the filter under one, three, and five measurement heights of the lidar is studied by using data from El Pont del Petroli measurement campaign. The filter is proved to remove apparent turbulence addition in all three cases, showing a deterioration of statistical indicators as the number of sounding heights increase., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00, H2020 ACTRIS-IMP project GA-871115 and H2020 ATMO-ACCESS project GA101008004. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Aerosol forcing from ground-based synergies over a decade in Barcelona, Spain

  • Oliveira, Daniel Camilo Fortunato dos Santos|||0000-0001-7461-7765
  • Sicard, Michaël|||0000-0001-8287-9693
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Gil Díaz, Cristina
  • Dubovik, Oleg
  • Derimian, Yevgeny
  • Momoi, Masahiro
  • Lopatin, Anton
This research aims to estimate long-term aerosol radiative effects by combining radiation and Aerosol Optical Depth (AOD) observations in Barcelona, Spain. Aerosol Radiative Forcing and Aerosol Forcing Efficiency (ARF and AFE) were estimated by combining shortwave radiation measurements from a SolRad-Net CM-21 pyranometer (level 1.5) and AERONET AOD (level 2), using the direct method. The shortwave AFE was derived from the slope between net solar radiation and AOD at 440, 675, 879, and 1020 nm, and the ARF was computed by multiplying the AFE by AOD at six solar zenith angles (20°, 30°, 40°, 50°, 60°, and 70°). Clear-sky conditions were selected from all-skies days by a quadratic fitting. The aerosol was classified to investigate the forcing contributions from each aerosol type. The aerosol classification was based on Pace and Toledano’s thresholds from AOD vs. Ångström Exponent (AE). The GRASP inversions were performed by combined AOD, radiation, Degree of Linear Polarization (DoLP) by zenith angles from the polarized sun–sky–lunar photometer and the elastic signal from the UPC-ACTRIS lidar system. The long-term AFE and ARF are both negative, with an increasing tendency (in absolute value) of +24% (AFE) and +40% (ARF) in 14 years. The yearly AFE varied from -331 to -10 Wm-2t-1, and the ARF varied from -64 to -2 Wm-2, associated with an AOD (440 nm) from 0.016 to 0.690. The three types of aerosols on clear-sky days are mixed aerosols (61%), desert dust (10%), and urban/industrial-biomass burning aerosols (29%). Combined with Gobbi’s method, this classification clustered the aerosols into four groups by AE analysis (two coarse- and two fine-mode aerosols). Then, the contribution of the aerosol types to the ARF showed that the desert dust forcing had the largest cooling effect in Barcelona (-61.5 to -37.4 Wm-2), followed by urban/industrial-biomass burning aerosols (-40.4 to -20.4 Wm-2) and mixed aerosols (-31.8 and -24.0 Wm-2). Regarding the comparison among Generalized Retrieval of Atmosphere and Surface Properties (GRASP) inversions, AERONET inversions, and direct method estimations, the AFE and ARF had some differences owing to their definitions in the algorithms. The DoLP, used as GRASP input, decreased the ARF overestimation for high AOD., This research was funded by (i) the Spanish Ministry of Science and Innovation and Universities MCIN/AEI/10.13039/501100011033: Red de Investigación RED2022-134824-E RED ESPAÑOLA DE ENTIDADES PARTICIPANTES EN ACTRIS; PID2023-149747NB-I00, Synergetic passive and active remote sensing of aerosol vertical profiling with applications to aerosol typing, cloud characterization and energy budget (SYRSAC); Support for membership to ACTRIS-ERIC; and (ii) European commission: H2020—Research and Innovation Framework Programme (ATMOACCESS, grant no. 10100800, ACTRIS IMP, grant no. 871115, GRASP ACE, grant no. 778349) and Horizon Europe Framework Programme (REALISTIC, grant no. 101086690). M.S. also received funding from CNES through EECLAT, AOS, and EXTRA-SAT projects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Volcanic eruption of Cumbre Vieja, La Palma, Spain: A first insight to the particulate matter injected in the troposphere

  • Sicard, Michaël|||0000-0001-8287-9693
  • Cordoba Jabonero, Carmen
  • Barreto Velasco, África
  • Welton, Ellsworth J.
  • Gil Díaz, Cristina
  • Carvajal Pérez, Clara Violeta
  • Comerón Tejero, Adolfo|||0000-0001-6886-3679
  • García Rodríguez, Omaira
  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Rodríguez Gómez, Alejandro Antonio|||0000-0002-9209-0685
The volcanic eruption of Cumbre Vieja (La Palma Island, Spain), started on 19 September 2021 and was declared terminated on 25 December 2021. A complete set of aerosol measurements were deployed around the volcano within the first month of the eruptive activity. This paper describes the results of the observations made at Tazacorte on the west bank of the island where a polarized micro-pulse lidar was deployed. The analyzed two-and-a-half months (16 October–31 December) reveal that the peak height of the lowermost and strongest volcanic plume did not exceed 3 km (the mean of the hourly values is 1.43 ± 0.45 km over the whole period) and was highly variable. The peak height of the lowermost volcanic plume steadily increased until week 11 after the eruption started (and 3 weeks before its end) and started decreasing afterward. The ash mass concentration was assessed with a method based on the polarization capability of the instrument. Two days with a high ash load were selected: The ash backscatter coefficient, aerosol optical depth, and the volume and particle depolarization ratios were, respectively, 3.6 (2.4) Mm−1sr−1, 0.52 (0.19), 0.13 (0.07) and 0.23 (0.13) on 18 October (15 November). Considering the limitation of current remote sensing techniques to detect large-to-giant particles, the ash mass concentration on the day with the highest ash load (18 October) was estimated to have peaked in the range of 800–3200 μg m−3 in the lowermost layer below 2.5 km., This research was funded by the Spanish Ministry of Science and Innovation (PID2020- 118793GA-I00, PID2019-104205GB-C21, EQC2018-004686-P and PID2019-103886RB-I00), the H2020 program from the European Union (GA no. 19ENV04, 654109, 778349, 871115 and 101008004), and the Unit of Excellence “María de Maeztu” (MDM-2017-0737) financed by the Spanish State Research Agency (AEI). The authors wish to thank ACTRIS, AEROSPAIN and Junta de Castilla y León (ref: VA227P20) for supporting the calibration of the AERONET sun photometers used in this publication, and also to Ayuntamiento de Tazacorte, Ayuntamiento de Fuencaliente and Cabildo Insular de La Palma for their help in terms of infrastructure and logistics. M.-Á.L.-C. and C.V.C.-P. are supported by the INTA predoctoral contract program. E.J.W. is funded by the NASA Radiation Sciences Program and Earth Observing System., Peer Reviewed, Article signat per 16 autors/es: Michaël Sicard (1,2), Carmen Córdoba-Jabonero (3), Africa Barreto (4), Ellsworth J. Welton (5), Cristina Gil-Díaz (1),Clara V. Carvajal-Pérez (3), Adolfo Comerón (1), Omaira García (4), Rosa García (6), María-Ángeles López-Cayuela (3),Constantino Muñoz-Porcar (1), Natalia Prats (4), Ramón Ramos (4), Alejandro Rodríguez-Gómez (1), Carlos Toledano (7), Carlos Torres (4) // (1) CommSensLab, Department of Signal Theory and Communications, Universitat Politècnica de Catalunya, 08034 Barcelona, Spain; (2) Ciències i Tecnologies de l’Espai-Centre de Recerca de l’Aeronàutica i de l’Espai/Institut d’Estudis Espacials de Catalunya (CTE-CRAE/IEEC), Universitat Politècnica de Catalunya, 08034 Barcelona, Spain; (3) Atmospheric Research and Instrumentation Branch, Instituto Nacional de Técnica Aeroespacial (INTA), 28850 Torrejon de Ardoz, Spain; (4) Izaña Atmospheric Research Center, State Meteorological Agency of Spain (AEMET), 38001 Santa Cruz de Tenerife, Spain: (5) Code 612, Goddard Space Flight Center, National Aeronautics and Space Administration, Greenbelt, MD 20771, USA; (6) TRAGSATEC, 28006 Madrid, Spain; (7) Group of Atmospheric Optics, Universidad de Valladolid, 47011 Valladolid, Spain
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Motivating a synergistic mixing-layer height retrieval method using backscatter lidar returns and microwave-radiometer temperature observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Saeed, Umar|||0000-0003-0261-2767
Mixing-Layer-Height (MLH) retrieval methods using backscattered lidar signals from a ceilometer (Jenoptik CHM-15k Nimbus) and temperature profiles from a Microwave Radiometer (MWR, HATPRO RPG) are compared in terms of their complementary capabilities and associated uncertainties. The Extended Kalman Filter (EKF) is used for MLH retrieval from backscattered lidar signals and the parcel method is used for MLH retrieval from MWR-derived potential-temperature profiles. The two principal sources of uncertainty in ceilometer-based MLH estimates are (i) incorrect layer attribution (~ hundreds of meters) and (ii) noise-induced errors (about 50 m at 3σ). MWR MLH uncertainties comprise (i) the total uncertainty in the retrieved potential temperature profile and (ii) ±0.5 K uncertainty in the surface temperature. Ceilometer-and MWR-based MLH estimates are in turn compared with reference to MLH estimates from radiosoundings. Twenty one measurement days from the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany are considered. It is shown that the MWR can track the full Mixed Layer (ML) diurnal cycle (i.e., including morning and evening transitions) with height-increasing error bars. The ceilometer-EKF MLH estimates are much smaller errorbars than those from the MWR under the well-developed clear-sky ML but the ceilometer-EKF is prone to ambiguous tracking some multilayer scenarios (e.g., the residual layer). We therefore introduce the synergistic MLH retrieval approach that combines both ceilometer and MWR estimates in order to optimize the benefits of both., This work was supported by the Spanish Government – European Regional Development Funds under PGC2018- 094132-B-I00 project, and via European Union (EU) Funds under projects ACTRIS-IMP (GA-871115) and GA 101008004 (ATMO-ACCESS). CommSensLab-UPC is a María-de-Maeztu Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of Marcos P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Measurement report: Spectral and statistical analysis of aerosol hygroscopic growth from multi-wavelength lidar measurements in Barcelona, Spain

  • Sicard, Michaël
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Muñoz Porcar, Constantino
  • Gil Díaz, Cristina
  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Dios Otín, Víctor Federico
This paper presents the estimation of the hygroscopic growth parameter of atmospheric aerosols retrieved with a multi-wavelength lidar, a micro-pulse lidar (MPL) and daily radiosoundings in the coastal region ofBarcelona, Spain. The hygroscopic growth parameter, γ , parameterizes the magnitude of the scattering enhancement in terms of the backscatter coefficient following Hänel parameterization. After searching for time-colocated lidar and radiosounding measurements (performed twice a day, all year round at 00:00 and 12:00 UTC), a strict criterion-based procedure (limiting the variations of magnitudes such as water vapor mixing ratio (WMVR), potential temperature, wind speed and direction) is applied to select only cases of aerosol hygroscopic growth. A spectral analysis (at the wavelengths of 355, 532 and 1064 nm) is performed with the multi-wavelength lidar, and a climatological one, at the wavelength of 532 nm, with the database of both lidars. The spectral analysis shows that below 2 km the regime of local pollution and sea salt γ decreases with increasing wavelengths. Sincethe 355 nm wavelength is sensitive to smaller aerosols, this behavior could indicate slightly more hygroscopic aerosols present at smaller size ranges. Above 2 km (the regime of regional pollution and residual sea salt) the values of γ at 532 nm are nearly the same as those below 2 km, and its spectral behavior is flat. This analysis and others from the literature are put together in a table presenting, for the first time, a spectral analysis of the hygroscopic growth parameter of a large variety of atmospheric aerosol hygroscopicities ranging from low (pure mineral dust, γ <0.2) to high (pure sea salt, γ > 1.0) hygroscopicity. The climatological analysis shows that, at 532 nm, γ is rather constant all year round and has a large monthly standard deviation, suggesting the presence of aerosols with different hygroscopic properties all year round. The annual γ is 0.55 ± 0.23. The height of the layer where hygroscopic growth was calculated shows an annual cycle with a maximum in summer and a minimum in winter. Former works describing the presence of recirculation layers of pollutants injected at various heights above the planetary boundary layer (PBL) may explain why γ , unlike the height of the layer where hygroscopic growth was calculated, is not season-dependent. The subcategorization of the whole database into No cloud and Below-cloud cases reveals a large difference of γ in autumn between both categories (0.71 and 0.33, respectively), possibly attributed to a depletion of inorganics at the point of activation into cloud condensation nuclei (CCN) in the Below-cloud cases. Our work calls for more in situ measurements to synergetically complete such studies based on remote sensing., This research was funded by the Spanish Ministry of Science and Innovation (grant nos. PID2019-103886RB-I00) and the H2020 program from the European Union (grant nos. 654109, 778349, 871115 and 101008004)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental assessment of the CNRM-ALADIN64 model with lidar and passive measurements during the dust and heatwave event in the Iberian Peninsula in July 2019

  • Gil Díaz, Cristina
  • Sicard, Michaël
  • Nabat, Pierre
  • Mallet, Marc
  • Muñoz Porcar, Constantino
  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Oliveira, Daniel Camilo Fortunato dos Santos
An evaluation of the CNRM-ALADIN64 [1] model simulation with dust aerosols is carried out during the dust event and heatwave in the Iberian Peninsula in summer 2019. The model performance is assessed against a variety of observational datasets. In particular, the total aerosol AOD is evaluated across different AERONET stations using both VIIRS satellite data and AERONET measurements. Shortwave downward (SW DW) radiative flux is compared with SolRad-Net observations at the Barcelona lidar station, while longwave upward (LW UP) radiative flux is assessed using CERES data over the Iberian Peninsula. Additionally, the vertical distribution of dust extinction is also evaluated with the Barcelona MLPNET lidar., This work was funded by MICIU/AEI/ 10.13039/501100011033 grant PID2023-149747NB-I00 and H2020-INFRAIA2020-1, ATMO-ACCESS, grant no. 10100800 [sic]., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Climatological assessment of the vertically resolved optical and microphysical aerosol properties by lidar measurements, sun photometer, and in situ observations over 17 years at Universitat Politècnica de Catalunya (UPC) Barcelona

  • Lolli, Simone
  • Sicard, Michaël
  • Amato, Francesco
  • Comerón Tejero, Adolfo
  • Gil Díaz, Cristina
  • Landi, Tony C.
  • Muñoz Porcar, Constantino
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Dios Otín, Víctor Federico
  • Rocadenbosch Burillo, Francisco
  • Rodríguez Gómez, Alejandro Antonio
  • Alastuey Urós, Andrés
  • Querol Carceller, Xavier
  • Reche Andúgar, Cristina
Aerosols are one of the most important pollutants in the atmosphere and have been monitored for the past few decades by remote sensing and in situ observation platforms to assess the effectiveness of government-managed reduction emission policies and assess their impact on the radiative budget of the Earth's atmosphere. In fact, aerosols can directly modulate incoming short-wave solar radiation and outgoing long-wave radiation and indirectly influence cloud formation, lifetime, and precipitation. In this study, we quantitatively evaluated long-term temporal trends and seasonal variability from a climatological point of view of the optical and microphysical properties of atmospheric particulate matter at the Universitat Politècnica de Catalunya (UPC), Barcelona, Spain, over the past 17 years, through a synergy of lidar, sun photometer, and in situ concentration measurements. Interannual temporal changes in aerosol optical and microphysical properties are evaluated through the seasonal Mann–Kendall test. Long-term trends in the optical depth of the recovered aerosol; the Ångström exponent (AE); and the concentrations of PM10, PM2.5, and PM1 reveal that emission reduction policies implemented in the past decades were effective in improving air quality, with consistent drops in PM concentrations and optical depth of aerosols. The seasonal analysis of the 17-year average vertically resolved aerosol profiles obtained from lidar observations shows that during summer the aerosol layer can be found up to an altitude of 5 km, after a sharp decay in the first kilometer. In contrast, during the other seasons, the backscatter profiles fit a pronounced exponential decay well with a well-defined scale height. Long-range transport, especially dust outbreaks from the Sahara, is likely to occur throughout the year. During winter, the dust aerosol layers are floating above the boundary layer, while during the other seasons they can penetrate the layer. The analysis also revealed that intense, short-duration pollution events during winter, associated with dust outbreaks, have become more frequent and intense since 2016. This study sheds some light on the meteorological processes and conditions that can lead to the formation of haze and helps decision makers adopt mitigation strategies to preserve large metropolitan areas in the Mediterranean basin., This research has been supported by the European Union through NextgenerationEU funds and by the following projects along the years: FP5 EARLINET project (grant no. ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004), projects of the Spanish National Research programs (grant nos. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754- C02-02/CLI, REN2003-09753-C02-C02/CLI, REN2003-09753- C02-C CGL2008-01330-E/CLI 02/CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149- E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project (grant no. 21487/08/NL/HE), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Parameterization of the inherent averaging of Doppler wind lidars: A Mann model simulator approach

  • Salcedo Bosch, Andreu
  • Lolli, Simone
  • Rocadenbosch Burillo, Francisco
  • López Martínez, Carlos
  • Mann, Jakob
  • Peña Diaz, Alfredo
This work presents a simulator approach to quantify and parametrize the inherent averaging error in wind turbulence measurements by Doppler Wind Lidars (DWL). The simulator replicates the instrumental setup of the IJmuiden campaign, which included an offshore meteorological mast with a DWL and an anemometer measuring wind at the same height as a reference (90 m a.s.l.). The Mann turbulence model was used to simulate wind turbulence boxes with a wide range of turbulence conditions, enabling the quantification of measurement errors as a function of the turbulence spectral characteristics via the Mann model parameters. The study found that only the Mann turbulence length scale (LMM) affected the DWL measurement of turbulence. Additionally, the inherent averaging error for the IJmuiden setup was parameterized using an analytical function, significantly reducing the computational effort required to retrieve it., This research is part of the project PID2021-126436OB-C21, funded by MInisterio de Ciencia, Innovación y Universidades (MICIU)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and ERDF/EU, and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministero dell’Università e della Ricerca. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRISIMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Atmospheric stability classification from floating Doppler wind lidar measurements: a machine learning approach

  • Salcedo Bosch, Andreu
  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
This work studies the capabilities of the k-nearest-neighbours (KNN) method to estimate the atmospheric stability from floating Doppler wind lidar measurements of the vertical wind profile. A procedure to generate synthetic wind profiles to be used as training data for the KNN is presented. The method is validated with experimental data gathered during IJmuiden campaign by a floating Doppler wind lidar against a metmast as a reference. A global hit rate of 70.2% is obtained when comparing the predicted stability classes to the reference ones., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Robust Adaptive Unscented Kalman Filter for floating Doppler Wind-LiDAR motion correction

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
This study presents a new method for correcting the six degrees of freedom motion-induced error in ZephIR 300 floating Doppler Wind-LiDAR-derived data, based on a Robust Adaptive Unscented Kalman Filter. The filter takes advantage of the known floating Doppler Wind-LiDAR (FDWL) dynamics, a velocity–azimuth display algorithm, and a wind model describing the LiDAR-retrieved wind vector without motion influence. The filter estimates the corrected wind vector by adapting itself to different atmospheric and motion scenarios, and by estimating the covariance matrices of related noise processes. The measured turbulence intensity by the FDWL (with and without correction) was compared against a reference fixed LiDAR over a 25-day period at “El Pont del Petroli”, Barcelona. After correction, the apparent motion-induced turbulence was greatly reduced, and the statistical indicators showed overall improvement. Thus, the Mean Difference improved from -1.70% (uncorrected) to 0.36% (corrected), the Root Mean Square Error (RMSE) improved from 2.01% to 0.86%, and coefficient of determination improved from 0.85 to 0.93., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“Comm- SensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the feasibility of radial spatial averaging to improve satellite Synthetic Aperture Radar ocean wind retrievals

  • Salcedo Bosch, Andreu
  • Lolli, Simone
  • Escalera i Mendo, Aina
  • Rocadenbosch Burillo, Francisco
  • López Martínez, Carlos
This work focuses on the feasibility of radial spatial av-eraging to improve satellite Synthetic Aperture Radar (SAR) ocean Horizontal Wind Speed (HWS) retrievals even in neu-tral atmosphere situations. The reference for comparison are in-situ HWS measurements from the FINO-1 offshore metmast. The data used from the Sentinel-1 SAR are the Level 2 Ocean (OCN) products for wind, wave, and current applications, retrieving the information from the Ocean Wind Field (OWI) component through Geophysical Model Func-tion (GMF) CMOD-IFR2. The GMF allows for estimation of the equivalent wind speed at 10 meters and, therefore, stable and convective regimes can bias the estimations. The best agreement between SAR and FINO-1 was found -as expected- for neutral atmospheres, which yielded a determi-nation coefficient of R2 = 0.90 and a root mean squared error (RMSE) of 1.2 m/s. In non-neutral scenarios, statisti-cal indicators showed that fine-tuned spatial averaging is also able to improve SAR HWS retrievals and yielded comparable statistical indicators (R2 = 0.87, RMSE = 1.1 m/s) for the HWS estimates., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa” and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministero dell’Universita e della Ricerca. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Motivating a synergistic mixing-layer height retrieval method using backscatter lidar returns and microwave-radiometer temperature observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Saeed, Umar
Mixing-Layer-Height (MLH) retrieval methods using backscattered lidar signals from a ceilometer (Jenoptik CHM-15k Nimbus) and temperature profiles from a Microwave Radiometer (MWR, HATPRO RPG) are compared in terms of their complementary capabilities and associated uncertainties. The Extended Kalman Filter (EKF) is used for MLH retrieval from backscattered lidar signals and the parcel method is used for MLH retrieval from MWR-derived potential-temperature profiles. The two principal sources of uncertainty in ceilometer-based MLH estimates are (i) incorrect layer attribution (~ hundreds of meters) and (ii) noise-induced errors (about 50 m at 3σ). MWR MLH uncertainties comprise (i) the total uncertainty in the retrieved potential temperature profile and (ii) ±0.5 K uncertainty in the surface temperature. Ceilometer-and MWR-based MLH estimates are in turn compared with reference to MLH estimates from radiosoundings. Twenty one measurement days from the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany are considered. It is shown that the MWR can track the full Mixed Layer (ML) diurnal cycle (i.e., including morning and evening transitions) with height-increasing error bars. The ceilometer-EKF MLH estimates are much smaller errorbars than those from the MWR under the well-developed clear-sky ML but the ceilometer-EKF is prone to ambiguous tracking some multilayer scenarios (e.g., the residual layer). We therefore introduce the synergistic MLH retrieval approach that combines both ceilometer and MWR estimates in order to optimize the benefits of both., This work was supported by the Spanish Government – European Regional Development Funds under PGC2018- 094132-B-I00 project, and via European Union (EU) Funds under projects ACTRIS-IMP (GA-871115) and GA 101008004 (ATMO-ACCESS). CommSensLab-UPC is a María-de-Maeztu Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of Marcos P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Overview: On the transport and transformation of pollutants in the outflow of major population centres – observational data from the EMeRGe European intensive operational period in summer 2017

  • Andrés Hernández, Maria Dolores
  • Hilboll, Andreas
  • Ziereis, Helmut
  • Förster, Eric
  • Krüger, Ovid O.
  • Kaiser, Katharina
  • Schneider, Johannes
  • Barnaba, Francesca
  • Vrekoussis, M
  • Sicard, Michaël
Megacities and other major population centres (MPCs) worldwide are major sources of air pollution, both locally as well as downwind. The overall assessment and prediction of the impact of MPC pollution on tropospheric chemistry are challenging. The present work provides an overview of the highlights of a major new contribution to the understanding of this issue based on the data and analysis of the EMeRGe (Effect of Megacities on the transport and transformation of pollutants on the Regional to Global scales) international project. EMeRGe focuses on atmospheric chemistry, dynamics, and transport of local and regional pollution originating in MPCs. Airborne measurements, taking advantage of the long range capabilities of the High Altitude and LOng Range Research Aircraft (HALO, https://www.halo-spp.de, last access: 22 March 2022), are a central part of the project. The synergistic use and consistent interpretation of observational data sets of different spatial and temporal resolution (e.g. from ground-based networks, airborne campaigns, and satellite measurements) supported by modelling within EMeRGe provide unique insight to test the current understanding of MPC pollution outflows. In order to obtain an adequate set of measurements at different spatial scales, two field experiments were positioned in time and space to contrast situations when the photochemical transformation of plumes emerging from MPCs is large. These experiments were conducted in summer 2017 over Europe and in the inter-monsoon period over Asia in spring 2018. The intensive observational periods (IOPs) involved HALO airborne measurements of ozone and its precursors, volatile organic compounds, aerosol particles, and related species as well as coordinated ground-based ancillary observations at different sites. Perfluorocarbon (PFC) tracer releases and model forecasts supported the flight planning, the identification of pollution plumes, and the analysis of chemical transformations during transport. This paper describes the experimental deployment and scientific questions of the IOP in Europe. The MPC targets – London (United Kingdom; UK), the Benelux/Ruhr area (Belgium, the Netherlands, Luxembourg and Germany), Paris (France), Rome and the Po Valley (Italy), and Madrid and Barcelona (Spain) – were investigated during seven HALO research flights with an aircraft base in Germany for a total of 53 flight hours. An in-flight comparison of HALO with the collaborating UK-airborne platform Facility for Airborne Atmospheric Measurements (FAAM) took place to assure accuracy and comparability of the instrumentation on board. Overall, EMeRGe unites measurements of near- and far-field emissions and hence deals with complex air masses of local and distant sources. Regional transport of several European MPC outflows was successfully identified and measured. Chemical processing of the MPC emissions was inferred from airborne observations of primary and secondary pollutants and the ratios between species having different chemical lifetimes. Photochemical processing of aerosol and secondary formation or organic acids was evident during the transport of MPC plumes. Urban plumes mix efficiently with natural sources as mineral dust and with biomass burning emissions from vegetation and forest fires. This confirms the importance of wildland fire emissions in Europe and indicates an important but discontinuous contribution to the European emission budget that might be of relevance in the design of efficient mitigation strategies. The present work provides an overview of the most salient results in the European context, with these being addressed in more detail within additional dedicated EMeRGe studies. The deployment and results obtained in Asia will be the subject of separate publications., The HALO deployment during EMeRGe was funded by a consortium comprising the German Research Foundation (DFG) Priority Program HALO-SPP 1294, the Institute of Atmospheric Physics of DLR, the Max Planck Society (MPG), and the Helmholtz Association. Flora Kluge, Benjamin Schreiner, and Klaus Pfeilsticker acknowledge the support given by the DFG through the project nos. PF 384-16, PF 384-17, and PG 385-19. Ralf Koppmann and Marc Krebsbach acknowledge DFG funding through project no. KR3861_1-1. Katja Bigge acknowledges additional funding from the Heidelberg Graduate School for Physics. Johannes Schneider, Katharina Kaiser, and Stephan Borrmann acknowledge funding through the DFG (project no. 316589531). Lisa Eirenschmalz and Hans Schlager acknowledge support by DFG through project MEPOLL (SCHL1857/4-1). Anna B. Kalisz Hedegaard would like to thank DAAD and DLR for a Research Fellowship. Hans Schlager acknowledge financial support by the DLR TraK (Transport and Climate) project. Michael Sicard acknowledges support from the EU (GA nos. 654109, 778349, 871115, and 101008004) and the Spanish Government (ref. nos. CGL2017-90884-REDT, PID2019-103886RB-I00, RTI2018-096548-B-I00, and MDM-2016-0600). Midhun George, Yangzhuoran Liu, M. Dolores Andrés Hernández, and John Phillip Burrows acknowledge financial support from the University of Bremen. FLEXPART simulations were performed on the HPC cluster Aether at the University of Bremen, financed by DFG within the scope of the Excellence Initiative. Anne-Marlene Blechschmidt was partly funded through the CAMS-84 project. Jennifer Wolf acknowledges support from the German Federal Ministry for Economic Affairs and Energy – BMWi (project Digitally optimized Engineering for Services – DoEfS; contract no. 20X1701B). Theresa Harlass thanks DLR VOR for funding the young investigator research group “Greenhouse Gases”. Mariano Mertens, Patrick Jöckel, and Markus Kilian acknowledge resources of the Deutsches Klimarechenzentrum (DKRZ) granted by the WLA project ID bd0617 for the MECO(n) simulations and the financial support from the DLR projects TraK (Transport und Klima) and the Initiative and Networking Fund of the Helmholtz Association through the project “Advanced Earth System Modelling Capacity” (ESM). Bruna A. Holanda acknowledges the funding from Brazilian CNPq (process 200723/2015-4)., Peer Reviewed, Article signat per 53 autors/es: M. Dolores Andrés Hernández (1), Andreas Hilboll (2), Helmut Ziereis (3), Eric Förster (4), Ovid O. Krüger (5), Katharina Kaiser (6,7), Johannes Schneider (7), Francesca Barnaba (8), Mihalis Vrekoussis (2,18), Jörg Schmidt (9), Heidi Huntrieser (3), Anne-Marlene Blechschmidt (1), Midhun George (1), Vladyslav Nenakhov (1,a), Theresa Harlass (3), Bruna A. Holanda (5), Jennifer Wolf (3), Lisa Eirenschmalz (3), Marc Krebsbach (10), Mira L. Pöhlker (5,b), Anna B. Kalisz Hedegaard (3,2), Linlu Mei (1), Klaus Pfeilsticker (11), Yangzhuoran Liu (1), Ralf Koppmann (10), Hans Schlager (3), Birger Bohn (12), Ulrich Schumann (3), Andreas Richter (1), Benjamin Schreiner (11), Daniel Sauer (3), Robert Baumann (3), Mariano Mertens (3), Patrick Jöckel (3), Markus Kilian (3), Greta Stratmann (3,c,) Christopher Pöhlker (5), Monica Campanelli (8), Marco Pandolfi (13), Michael Sicard (14,15), José L. Gómez-Amo (16), Manuel Pujadas (17), Katja Bigge (11), Flora Kluge (11), Anja Schwarz (9), Nikos Daskalakis (2), David Walter (5), Andreas Zahn (4), Ulrich Pöschl (5), Harald Bönisch (4), Stephan Borrmann (6,7), Ulrich Platt (11), and John P. Burrows (1) // (1) Institute of Environmental Physics, University of Bremen, Bremen, Germany; (2) Laboratory for Modeling and Observation of the Earth System, Institute of Environmental Physics, Bremen, Germany; (3) Deutsches Zentrum für Luft- und Raumfahrt (DLR), Institut für Physik der Atmosphäre, Oberpfaffenhofen, Germany; (4) Atmospheric Trace Gases and Remote Sensing, Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research, Karlsruhe, Germany; (5) Multiphase Chemistry Department, Max Planck Institute for Chemistry, Mainz, Germany; (6) Institute for Atmospheric Physics, Johannes Gutenberg University, Mainz, Germany, (7) Particle Chemistry Department, Max Planck Institute for Chemistry, Mainz, Germany; (8) National Research Council of Italy, Institute of Atmospheric Sciences and Climate (CNR-ISAC), Rome, Italy; (9) Leipzig Institute for Meteorology, Leipzig University, Leipzig, Germany; (10) Institute for Atmospheric and Environmental Research, University of Wuppertal, Wuppertal, Germany; (11) Institute for Environmental Physics, University of Heidelberg, Heidelberg, Germany, (12) Institute of Energy and Climate Research IEK-8, Forschungszentrum Jülich, Jülich, Germany; (13) Consejo Superior de Investigaciones Científicas, Institute of Environmental Assessment and Water Research, Barcelona, Spain; (14) CommSensLab, Department of Signal Theory and Communications, Universitat Politècnica de Catalunya, Barcelona, Spain; (15) Ciències i Tecnologies de l’Espai-Centre de Recerca de l’Aeronàutica i de l’Espai/Institut d’Estudis Espacials de Catalunya), Universitat Politècnica de Catalunya, Barcelona, Spain; (16) Department of Earth Physics and Thermodynamics, University of Valencia, Burjassot, Spain; (17) Atmospheric Pollution Unit, Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (Ciemat), Madrid, Spain; (18) Climate and Atmosphere Research Center (CARE-C), The Cyprus Institute, Nicosia, Cyprus anow at: Flight Experiments, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Oberpfaffenhofen, Germany, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The MONARCH high-resolution reanalysis of desert dust aerosol over Northern Africa, the Middle East and Europe (2007–2016)

  • di Tomaso, Enza
  • Escribano Alisio, Jeronimo
  • Basart Alpuente, Sara
  • Macchia, Francesca
  • Benincasa, Francesco
  • Bretonnière, Pierre-Antoine
  • Buñuel, Arnau
  • Castrillo Melguizo, Miguel
  • Gonçalves Ageitos, María
  • Jorba Casellas, Oriol
  • Klose, Martina
  • Montané Pinto, Gilbert
  • Obiso, Vincenzo
  • Olid García, Miriam
  • Pérez García-Pando, Carlos
One of the challenges in studying desert dust aerosol along with its numerous interactions and impacts is the paucity of direct in situ measurements, particularly in the areas most affected by dust storms. Satellites typically provide column-integrated aerosol measurements, but observationally constrained continuous 3D dust fields are needed to assess dust variability, climate effects and impacts upon a variety of socio-economic sectors. Here, we present a high-resolution regional reanalysis data set of desert dust aerosols that covers Northern Africa, the Middle East and Europe along with the Mediterranean Sea and parts of central Asia and the Atlantic and Indian oceans between 2007 and 2016. The horizontal resolution is 0.1◦ latitude × 0.1◦ longitude in a rotated grid, and the temporal resolution is 3 h. The reanalysis was produced using local ensemble transform Kalman filter (LETKF) data assimilation in the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (MONARCH) developed at the Barcelona Supercomputing Center (BSC). The assimilated data are coarse-mode dust optical depth retrieved from the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue Level 2 products. The reanalysis data set consists of upper-air variables (dust mass concentrations and the extinction coefficient), surface variables (dust deposition and solar irradiance fields among them) and total column variables (e.g. dust optical depth and load). Some dust variables, such as concentrations and wet and dry deposition, are expressed for a binned size distribution that ranges from 0.2 to 20 µm in particle diameter. Both analysis and first-guess (analysis-initialized simulation) fields are available for the variables that are diagnosed from the state vector. A set of ensemble statistics is archived for each output variable, namely the ensemble mean, standard deviation, maximum and median. The spatial and temporal distribution of the dust fields follows well-known dust cycle features controlled by seasonal changes in meteorology and vegetation cover. The analysis is statistically closer to the assimilated retrievals than the first guess, which proves the consistency of the data assimilation method. Independent evaluation using Aerosol Robotic Network (AERONET) dust-filtered optical depth retrievals indicates that the reanalysis data set is highly accurate (mean bias = −0.05, RMSE = 0.12 and r = 0.81 when compared to retrievals from the spectral de-convolution algorithm on a 3-hourly basis). Verification statistics are broadly homogeneous in space and time with regional differences that can be partly attributed to model limitations (e.g. poor representation of small-scale emission processes), the presence of aerosols other than dust in the observations used in the evaluation and differences in the number of observations among seasons. Such a reliable high-resolution historical record of atmospheric desert dust will allow a better quantification of dust impacts upon key sectors of society and economy, including health, solar energy production and transportation. The reanalysis data set (Di Tomaso et al., 2021) is distributed via Thematic Real-time Environmental Distributed Data Services (THREDDS) at BSC and is freely available at http://hdl.handle.net/21.12146/c6d4a608-5de3-47f6-a004-67cb1d498d98 (last access: 10 June 2022)., This research has been supported by the DustClim project, which is part of ERA4CS, an ERA-NET programme co-funded by the European Union’s Horizon 2020 research and innovation programme (grant no. 690462); the European Research Council (FRAGMENT (grant no. 773051)); grant no. RYC-2015- 18690 funded by MCIN/AEI/10.13039/501100011033 and ESF Investing in your future; grant no. CGL2017-88911-R funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe; the AXA Research Fund (AXA Chair on Sand and Dust Storms); the European Commission, Horizon 2020 Framework Programme (grant no. 792103 (SOLWARIS)); and ATMO-ACCESS (Access to Atmospheric Research Facilities) funded in the frame of the programme H2020-EU.1.4.1.2 (grant no. 101008004, 1 April 2021–31 March 2025). Jerónimo Escribano and Martina Klose have received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreements H2020-MSCACOFUND-2016-754433 and H2020-MSCA-IF-2017-789630, respectively. Martina Klose received further support through the Helmholtz Association’s Initiative and Networking Fund (grant no. VH-NG-1533). This work has been partially funded by the contribution agreement between AEMET and BSC to carry out development and improvement activities of the products and services supplied by the World Meteorological Organization (WMO) Barcelona Dust Regional Center (i.e. the WMO Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS) Regional Center for Northern Africa, the Middle East and Europe)., Peer Reviewed, Article signat per 24 autors/es: Enza Di Tomaso (1) , Jerónimo Escribano (1) , Sara Basart (1) , Paul Ginoux (2) , Francesca Macchia (1) , Francesca Barnaba (3) , Francesco Benincasa (1), Pierre-Antoine Bretonnière (1), Arnau Buñuel (1), Miguel Castrillo (1), Emilio Cuevas (4) , Paola Formenti (5) , María Gonçalves (1,6), Oriol Jorba (1), Martina Klose (1,7), Lucia Mona (8), Gilbert Montané Pinto (1) , Michail Mytilinaios (8), Vincenzo Obiso (1,a), Miriam Olid (1), Nick Schutgens (9) , Athanasios Votsis (10,11), Ernest Werner (12), and Carlos Pérez García-Pando (1,13) // (1) Barcelona Supercomputing Center (BSC), Barcelona, Spain; (2) NOAA Geophysical Fluid Dynamics Laboratory, Princeton, New Jersey, USA; (3) Consiglio Nazionale delle Ricerche–Istituto di Scienze dell’Atmosfera e del Clima (CNR–ISAC), Rome, Italy; (4) Izaña Atmospheric Research Center (IARC), Agencia Estatal de Meteorología (AEMET), Santa Cruz de Tenerife, Spain; (5) Université Paris Cité and Univ Paris-Est Créteil, CNRS, LISA, 75013 Paris, France; (6) Department of Project and Construction Engineering, Universitat Politècnica de Catalunya – BarcelonaTech (UPC), Terrassa, Spain; (7) Department Troposphere Research, Institute of Meteorology and Climate Research (IMK-TRO), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany; (8) Consiglio Nazionale delle Ricerche–Istituto di Metodologie per l’Analisi Ambientale (CNR–IMAA), Tito Scalo (PZ), Italy; (9) Department of Earth Sciences, Vrije Universiteit Amsterdam, 1081 HV Amsterdam, the Netherlands; (10) Section of Governance and Technology for Sustainability (BMS-CSTM), University of Twente, Enschede, the Netherlands; (11) Weather and Climate Change Impact Research, Finnish Meteorological Institute (FMI), Helsinki, Finland; (12) Agencia Estatal de Meteorología (AEMET), Barcelona, Spain; (13) ICREA, Catalan Institution for Research and Advanced Studies, Barcelona, Spain anow at: NASA Goddard Institute for Space Studies (GISS), New York, New York, USA, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.3 - Millorar l’educació, la conscienciació i la capacitat humana i institucional en relació amb la mitigació del canvi climàtic, l’adaptació a aquest, la reducció dels efectes i l’alerta primerenca, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An explicit formulation for the retrieval of the overlap function in an elastic and Raman aerosol lidar

  • Comerón Tejero, Adolfo
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
  • Sicard, Michaël
  • Dios Otín, Víctor Federico
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Rocadenbosch Burillo, Francisco
We derive an explicit (i.e., non-iterative) formula for the retrieval of the overlap function in an aerosol lidar with both elastic and Raman N2 and/or O2 channels used for independent measurements of aerosol backscatter and extinction coefficients. The formula requires only the measured, range-corrected elastic and the corresponding Raman signals, plus an assumed lidar ratio. We assess the influence of the lidar ratio error in the overlap function retrieval and present retrieval examples., This research has been supported by the Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00) as well as the H2020 Environment (grant nos. 871115 and 101008004) and the H2020 Excellent Science (grant no. 778349) programs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analytical-model compensation of the motion-induced turbulence in floating Doppler-wind Lidar measurements

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
This work presents a novel method to statistically compensate for the apparent motion-induced turbulence in floating Doppler-Wind LiDAR measurements. The method relies on the analytical model [1], recently published by the authors, applied to the ZephIR T M 300 continuous-wave LiDAR. Performance of the method is studied over two floating LiDAR measurement sites/configurations, a mild near-offshore Mediterranean site and an open-sea site (IJmuiden, North Sea), and compared to fixed LiDAR measurements as a reference. The method outperforms other motion compensation approaches based on turbulence increment estimation with less computational effort., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On adaptive unscented Kalman filtering for floating Doppler wind-lidar motion correction: Effect of the number of lidar measurement heights

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
This work studies the influence of the number of lidar measurement heights on the performance of the floating Doppler wind lidar motion-correction algorithm, recently published by the authors. The work is in the context of offshore wind energy and continuous-wave focusable ZephirTM 300 lidar. A downsampling technique applied over the lidar-measured wind speed time-series is used to simulate different height-sounding configurations. The operation of the filter under one, three, and five measurement heights of the lidar is studied by using data from El Pont del Petroli measurement campaign. The filter is proved to remove apparent turbulence addition in all three cases, showing a deterioration of statistical indicators as the number of sounding heights increase., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00, H2020 ACTRIS-IMP project GA-871115 and H2020 ATMO-ACCESS project GA101008004. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Retrieving Monin-Obukhov dimensionless wind shear and stability from floating lidar observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Salcedo Bosch, Andreu
  • Peña Diaz, Alfredo
Floating-lidar-derived wind profiles are used to retrieve the vertical wind speed gradient, dimensionless wind shear, and dimensionless stability using Monin-Obukhov similarity theory (MOST) in the context of IJmuiden campaign. Reference retrievals are obtained by applying the same methodology to metmast-derived wind profiles. Wind gradient estimates from floating lidar measurements are successfully compared to those from the reference metmast at three different heights, yielding coefficients of determination higher than ρ 2 = 0.83. MOST flux relationships are also re-encountered when representing the dimensionless wind shear estimates as a function of dimensionless stability., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Retrieval of planetary boundary layer height from Calipso satellite: A big data and machine learning approach

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • López Martínez, Carlos
This study presents a Random Forest (RF) model trained on an extensive dataset to estimate the planetary boundary layer height (PBLH) retrieved from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board of Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Level 1 measurements during both daytime and nighttime. The novelty of the method lies in the RF’s capability to automatically classify the observed scenarios, enabling P BLH estimation in cloudy, multi-layer, and dust-laden conditions across diverse global regions. The RF model was trained using 10 years of CALIOP data, with radiosonde-derived P BLH retrievals coinciding with CALIPSO overpasses serving as ground truth. The results demonstrate that the RF model surpasses existing state-of-the-art methods in spatial and temporal coverage, achieving a correlation coefficient (R2 = 0.6) and root-mean-square error (RMSE) of 333.60 m, without requiring atmospheric typing, data filtering, or additional ancillary information., This research is part of the project PID2021-126436OB-C21, funded by MInisterio de Ciencia, Innovación y Universidades (MICIU)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and ERDF/EU, and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministero dell’Università e della Ricerca. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRISIMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Aerosol radiative impact during the summer 2019 heatwave produced partly by an inter-continental Saharan dust outbreak – Part 2: Long-wave and net dust direct radiative effect

  • Sicard, Michaël
  • Cordoba Jabonero, Carmen
  • López Cayuela, María Ángeles
  • Ansmann, Albert
  • Comerón Tejero, Adolfo
  • Zorzano, María-Paz
  • Rodríguez Gómez, Alejandro Antonio
  • Muñoz Porcar, Constantino
This paper is the companion paper of Córdoba-Jabonero et al. (2021). It deals with the estimation of the long-wave (LW) and net dust direct radiative effect (DRE) during the dust episode that occurred between 23 and 30 June 2019 and was paired with a mega-heatwave. The analysis is performed at two European sites where polarized micro-pulse lidars ran continuously to retrieve the vertical distribution of the dust optical properties: Barcelona, Spain, 23–30 June, and Leipzig, Germany, 29–30 June. The radiative effect is computed with the GAME (global atmospheric model) radiative transfer model separately for the fine- and coarse-mode dust. The instantaneous and daily radiative effect and radiative efficiency (DREff) are provided for the fine-mode, coarse-mode and total dust at the surface, top of the atmosphere (TOA) and in the atmosphere. The fine-mode daily LW DRE is low (<¿6¿% of the short-wave (SW) component), which makes the coarse-mode LW DRE the main modulator of the total net dust DRE. The coarse-mode LW DRE starts exceeding (in absolute values) the SW component in the middle of the episode, which produces positive coarse-mode net DRE at both the surface and TOA. Such an unusual tendency is attributed to increasing coarse-mode size and surface temperature throughout the episode. This has the effect of reducing the SW cooling in Barcelona up to the point of reaching total net positive dust DRE (+0.9¿W¿m-2) on one occasion at the surface and quasi-neutral (-0.6¿W¿m-2) at TOA. When adding the LW component, the total dust SW radiative efficiency is reduced by a factor of 1.6 at both surface (on average over the episode the total dust net DREff is -54.1¿W¿m-2¿t-1) and TOA (-37.3¿W¿m-2¿t-1). A sensitivity study performed on the surface temperature and the air temperature in the dust layer, both linked to the heatwave and upon which the LW DRE strongly depends, shows that the heatwave contributed to reducing the dust net cooling effect at the surface and that it had nearly no effect at TOA. Its subsequent effect was thus to reduce the heating of the atmosphere produced by the dust particles., This research was funded by the Spanish Ministry of Science, Innovation and Universities (CGL2017- 90884-REDT and PRX18/00137 “Salvador de Madariaga” program), the Spanish Ministry of Science and Innovation (PID2019-104205GB-C21 and PID2019-103886RB-I00), the H2020 program from the European Union (GA nos. 654109, 778349, 871115 and 101008004), and both Units of Excellence “María de Maeztu” (MDM-2016-0600 and MDM-2017-0737) financed by the Spanish State Research Agency (AEI). MALC is supported by the INTA predoctoral contract programme., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Synergistic mixed-layer height retrieval method using microwave radiometer and lidar ceilometer observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Saeed, Umar
This paper tackles synergistic mixed-layer height (MLH) estimation via a combination of microwave radiometer (MWR) and lidar ceilometer (LC)-based estimates. While MLH-MWR estimates rely on potential temperature retrievals, MLH-LC estimates rely on aerosol gradients. The pros and cons of MLH retrievals obtained from MWR via the parcel method and from LC via an extended Kalman filter (EKF)-based method are used to motivate the synergistic algorithm. The synergistic algorithm is introduced as a maximum-likelihood combination of MLH-MWR and MLH-LC. Two case examples from the 2013 HOPE campaign at Jülich, Germany, are used to show the robustness of the synergistic method and the effect of surface temperature measurement error. Doppler wind lidar retrievals and radiosonde reference MLH estimates are used for validation., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER. Data were provided by Julich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of M.P.A.S was supported under Grant PRE2018-086054 funded by MCIN/AEI/ 10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Estimation of the mass concentration of volcanic ash using ceilometers: study of fresh and transported plumes from la palma volcano

  • Bedoya Velásquez, Andrés Esteban
  • Hoyos Restrepo, Manuela
  • Barreto Velasco, África
  • García Cabrera, Rosa Delia
  • Romero Campos, Pedro Miguel
  • García Rodríguez, Omaira
  • Ramos López, Ramón
  • Roininen, Reijo
  • Toledano, Carlos
  • Sicard, Michaël
  • Ceolato, Romain
This study presents a synergistic approach to the study of the aerosol optical and microphysical properties measured in La Palma, Spain, during the 2021 eruption of the Cumbre Vieja volcano (from 19 September to 13 December 2021). This study aims to characterize the different phases of the volcanic eruption using the spatio-temporal evolution of the event together with the mass concentration quantification of four different atmospheric layers. The impact of the plume’s pathway that reached the South of France is analyzed. Here, passive and active remote sensors were used, namely CL51 and CL61 ceilometers and AERONET sunphotometers. The attenuated backscattering ranged from 0.8 to 9.1 × 10-6 (msr)-1 and the volume depolarization ratio measured nearby the volcano was up to 0.3. The ash plume remained within the first 4 km agl, with intense episodes that reached mean aerosol optical depth values of up to 0.4. Thirteen study cases were selected where coarse mode was dominant over fine mode. For the data selection, the fine and coarse lidar ratios found were 3.9 ± 0.8 and 21.0 ± 3.8 sr in the north and 6.9 ± 1.8 and 30.1 ± 10.3 sr in the south. The ash mass concentration reached moderate levels with maximum values of up to 313.7 µ gm., This work was financially supported by ONERA within the framework of the PROMETE project 2017–2021; the Spanish Ministry of Science and Innovation (PID2019-103886RB-I00nAEI n10.13039n501100011033); and the H2020 program from the European Union (GA no. 654109, 778349, 871115, 101008004 and 101086690)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical solver for vertical air motion estimation

  • Salcedo Bosch, Andreu
  • Domínguez Pla, Paula
  • Rocadenbosch Burillo, Francisco
  • Frasier, Stephen J.
We present preliminary research on a method to estimate Vertical Air Motion (VAM) at a particular height by comparing the measured rain-rate (RR) by a vertically-pointing S-band Frequency-Modulated Continuous-Wave (FMCW) radar with that of a ground-based disdrometer. The method is based on a constrained parametric solver, assuming high correlation between 5-min averaged rain rates measured by the radar and disdrometer. The method is tested over disdrometer and radar observations during the Verification of the ORigins Tornado EXperiment in South East US (VORTEX-SE) project. Finally, the results are partially validated by means of fitting a gamma distribution to the VAM-corrected DSD profiles and studying its parameters., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMOACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dust aerosol radiative effects during a dust event and heatwave in summer 2019 simulated with a regional climate atmospheric model over the Iberian Peninsula

  • Gil Díaz, Cristina
  • Sicard, Michaël
  • Nabat, Pierre
  • Mallet, Marc
  • Muñoz Porcar, Constantino
  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Oliveira, Daniel Camilo Fortunato dos Santos
Mineral dust particles significantly influence the Earth’s climate through direct and semi-direct radiative effects. This study investigates these effects and their meteorological impacts during a dust intrusion and heatwave over the Iberian Peninsula in summer 2019 using a regional climate model. Three simulations with different spectral nudging configurations are evaluated. During the central period, the mean direct and semi-direct radiative effects in the shortwave spectrum at the top of the atmosphere (bottom of the atmosphere) are -0.4 ± 0.4 (-3.9 ± 2.3) Wm-2 and +0.1 ± 1.7 (-0.1 ± 1.9) Wm-2, respectively. In the longwave spectrum, these effects are +0.1 ± 0.1 (+0.3 ± 0.1) WmWm-2 and 0.0 ± 0.6 (+0.9 ± 1.1) Wm-2, respectively. The semi-direct effect mitigates 18.8% of the dust-induced warming in the full atmosphere and alters meteorological variables. The liquid water path decreases by -0.2 ± 4.5 mg m-2, the cloud fraction in the upper (lower) troposphere reduces (increases) by -0.2 ± 1.2 (+0.1 ± 1.3) %, and the near-surface air temperature drops slightly by -0.2 ± 0.2 °C. The results highlight substantial spatial variability and underscore the importance of considering semi-direct radiative effects in radiative analysis., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00 and PID2023-149747NB-I00), the European Commission through the Horizon 2020 Programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349), and through the Horizon Europe Programme (project REALISTIC, grant agreement no. 101086690). M. Sicard also received funding from CNES through the projects EECLAT, AOS and EXTRA-SAT., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Study of optical scattering properties and direct radiative effects of high-altitude cirrus clouds in Barcelona, Spain, with 4 years of lidar measurements

  • Gil Díaz, Cristina
  • Sicard, Michaël
  • Sourdeval, Odran
  • Saiprakash, Athulya
  • Muñoz Porcar, Constantino
  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Oliveira, Daniel Camilo Fortunato dos Santos
Cloud–radiation interaction still drives large uncertainties in climate models, and its estimation is key to make more accurate predictions. In this context, high-altitude cirrus clouds play a fundamental role because (1) they have a high occurrence frequency globally and (2) they are the only cloud that can readily cool or warm the atmosphere during daytime, depending on their properties. This study presents a comprehensive analysis of optical scattering properties and direct radiative effect of cirrus clouds based on 4 years of continuous groundbased lidar measurements with the Barcelona (Spain) Micro Pulse Lidar. First, we introduce a novel approach of a self-consistent scattering model for cirrus clouds to determine their optical scattering properties at different wavelengths using only the extinction coefficient and cloud temperature. Second, we calculate the direct radiative effects of cirrus clouds with the discrete ordinates method, and we validate our results with SolRad-Net pyranometers and NOAA-20 measurements. Third, we present a case study analysing the direct radiative effect of a cirrus cloud along its back-trajectory using data from the Chemical LAgrangian Model of the Stratosphere with microphysics scheme for Ice clouds formation (CLaMS-Ice). The results show that the cirrus clouds with an average ice water content of 4.97 ± 5.53 mg m-3 , in the nighttime, have a positive direct radiative effect at the top of the atmosphere (TOA; +40.4 W m-2 ) almost twice than at the bottom of the atmosphere (BOA; +22.1 W m-2 ); in the daytime, they have generally a negative direct radiative effect at BOA (-11.5 W m-2 , 82 % of the cases) and always a positive effect at TOA (+14.2 W m-2 ). In these simulations, the influence of the lower layer aerosols is negligible in the cirrus direct radiative effects, with a bias (denoted BIAS) of -1.2 %. For the case study, the net direct radiative effects produced by the cirrus cloud, are from 0 to +40 W m-2 at TOA and from -51 to +20 W m-2 at BOA. This study reveals that the complexity of the cirrus cloud direct radiative effect calculation lies in the fact that it is highly sensitive to the cirrus scene properties., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019-103886RB-I00 and PID2023-149747NB-I00) and the European Commission through the Horizon 2020 programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349; and project REALISTIC, grant agreement no. 101086690). Michäel Sicard also received funding from CNES through the EECLAT, AOS and EXTRA-SAT projects., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to -0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the temperature stability requirements of free-running Nd:YAG lasers for atmospheric temperature profiling through the rotational Raman technique

  • Zenteno Hernández, José Alex
  • Comerón Tejero, Adolfo
  • Dios Otín, Víctor Federico
  • Rodríguez Gómez, Alejandro Antonio
  • Muñoz Porcar, Constantino
  • Sicard, Michaël
  • Franco, Noemi
  • Behrendt, Andreas
  • Di Girolamo, Paolo
We assess the temperature stability requirements of unseeded Nd:YAG lasers in lidar systems for atmospheric temperature profiling through the rotational Raman technique. Taking as a reference a system using a seeded laser assumed to emit pulses of negligible spectral width and free of wavelength drifts, we estimate first the effect of the pulse spectral widening of the unseeded laser on the output of the interference filters, and then we derive the limits of the allowable wavelength drift for a given bias in the temperature measurement that would add to the noise-induced uncertainty. Finally, using spectroscopic data, we relate the allowable wavelength drift to allowable temperature variations in the YAG rod. We find that, in order to keep the bias affecting atmospheric temperature measurements smaller than 1¿K, the Nd:YAG rod temperature should also be kept within a variation range of 1¿K., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Volcanic eruption of Cumbre Vieja, La Palma, Spain: A first insight to the particulate matter injected in the troposphere

  • Sicard, Michaël
  • Cordoba Jabonero, Carmen
  • Barreto Velasco, África
  • Welton, Ellsworth J.
  • Gil Díaz, Cristina
  • Carvajal Pérez, Clara Violeta
  • Comerón Tejero, Adolfo
  • García Rodríguez, Omaira
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
The volcanic eruption of Cumbre Vieja (La Palma Island, Spain), started on 19 September 2021 and was declared terminated on 25 December 2021. A complete set of aerosol measurements were deployed around the volcano within the first month of the eruptive activity. This paper describes the results of the observations made at Tazacorte on the west bank of the island where a polarized micro-pulse lidar was deployed. The analyzed two-and-a-half months (16 October–31 December) reveal that the peak height of the lowermost and strongest volcanic plume did not exceed 3 km (the mean of the hourly values is 1.43 ± 0.45 km over the whole period) and was highly variable. The peak height of the lowermost volcanic plume steadily increased until week 11 after the eruption started (and 3 weeks before its end) and started decreasing afterward. The ash mass concentration was assessed with a method based on the polarization capability of the instrument. Two days with a high ash load were selected: The ash backscatter coefficient, aerosol optical depth, and the volume and particle depolarization ratios were, respectively, 3.6 (2.4) Mm−1sr−1, 0.52 (0.19), 0.13 (0.07) and 0.23 (0.13) on 18 October (15 November). Considering the limitation of current remote sensing techniques to detect large-to-giant particles, the ash mass concentration on the day with the highest ash load (18 October) was estimated to have peaked in the range of 800–3200 μg m−3 in the lowermost layer below 2.5 km., This research was funded by the Spanish Ministry of Science and Innovation (PID2020- 118793GA-I00, PID2019-104205GB-C21, EQC2018-004686-P and PID2019-103886RB-I00), the H2020 program from the European Union (GA no. 19ENV04, 654109, 778349, 871115 and 101008004), and the Unit of Excellence “María de Maeztu” (MDM-2017-0737) financed by the Spanish State Research Agency (AEI). The authors wish to thank ACTRIS, AEROSPAIN and Junta de Castilla y León (ref: VA227P20) for supporting the calibration of the AERONET sun photometers used in this publication, and also to Ayuntamiento de Tazacorte, Ayuntamiento de Fuencaliente and Cabildo Insular de La Palma for their help in terms of infrastructure and logistics. M.-Á.L.-C. and C.V.C.-P. are supported by the INTA predoctoral contract program. E.J.W. is funded by the NASA Radiation Sciences Program and Earth Observing System., Peer Reviewed, Article signat per 16 autors/es: Michaël Sicard (1,2), Carmen Córdoba-Jabonero (3), Africa Barreto (4), Ellsworth J. Welton (5), Cristina Gil-Díaz (1),Clara V. Carvajal-Pérez (3), Adolfo Comerón (1), Omaira García (4), Rosa García (6), María-Ángeles López-Cayuela (3),Constantino Muñoz-Porcar (1), Natalia Prats (4), Ramón Ramos (4), Alejandro Rodríguez-Gómez (1), Carlos Toledano (7), Carlos Torres (4) // (1) CommSensLab, Department of Signal Theory and Communications, Universitat Politècnica de Catalunya, 08034 Barcelona, Spain; (2) Ciències i Tecnologies de l’Espai-Centre de Recerca de l’Aeronàutica i de l’Espai/Institut d’Estudis Espacials de Catalunya (CTE-CRAE/IEEC), Universitat Politècnica de Catalunya, 08034 Barcelona, Spain; (3) Atmospheric Research and Instrumentation Branch, Instituto Nacional de Técnica Aeroespacial (INTA), 28850 Torrejon de Ardoz, Spain; (4) Izaña Atmospheric Research Center, State Meteorological Agency of Spain (AEMET), 38001 Santa Cruz de Tenerife, Spain: (5) Code 612, Goddard Space Flight Center, National Aeronautics and Space Administration, Greenbelt, MD 20771, USA; (6) TRAGSATEC, 28006 Madrid, Spain; (7) Group of Atmospheric Optics, Universidad de Valladolid, 47011 Valladolid, Spain, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Geometrical and optical properties of cirrus clouds in Barcelona, Spain: analysis with the two-way transmittance method of 4 years of lidar measurements

  • Gil Díaz, Cristina
  • Sicard, Michaël
  • Comerón Tejero, Adolfo
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
  • Lewis, Jasper R.
  • Welton, Ellsworth J.
  • Lolli, Simone
In this paper a statistical study of cirrus geometrical and optical properties based on 4 years of continuous ground-based lidar measurements with the Barcelona (Spain) Micro Pulse Lidar (MPL) is analysed. First, a review of the literature on the two-way transmittance method is presented. This method is a well-known lidar inversion method used to retrieve the optical properties of an aerosol–cloud layer between two molecular (i.e. aerosol and cloud-free) regions below and above, without the need to make any a priori assumptions about their optical and/or microphysical properties. Second, a simple mathematical expression of the two-way transmittance method is proposed for both ground-based and spaceborne lidar systems. This approach of the method allows the retrieval of the cloud optical depth, the cloud column lidar ratio and the vertical profile of the cloud backscatter coefficient. The method is illustrated for a cirrus cloud using measurements from the ground-based MPL and from the spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). Third, the database is then filtered with a cirrus identification criterion based on (and compared to) the literature using only lidar and radiosonde data. During the period from November 2018 to September 2022, 367 high-altitude cirrus clouds were identified at 00:00 and 12:00 UTC, of which 203 were successfully inverted with the two-way transmittance method. The statistical results of these 203 high-altitude cirrus clouds show that the cloud thickness is 1.8 ± 1.1 km, the mid-cloud temperature is −51 ± 8 ∘C and the linear cloud depolarization ratio is 0.32 ± 0.13. The application of the transmittance method yields an average cloud optical depth (COD) of 0.36 ± 0.45 and a mean effective column lidar ratio of 30 ± 19 sr. Statistical results of the errors associated with the two-way transmittance method retrievals are also provided. The highest occurrence of cirrus is observed in spring and the majority of cirrus clouds (48 %) are visible (0.03 < COD < 0.3), followed by opaque (COD > 0.3) with a percentage of 38 %. Together with results from other sites, possible latitudinal dependencies have been analysed together with correlations between cirrus cloud properties. For example, we noted that in Barcelona the COD correlates positively with the cloud base temperature, effective column lidar ratio and linear cloud depolarization ratio and negatively with the cloud base height., This research has been partly funded by the Spanish Agencia Estatal de Investigación (grant no. PID2019103886RB-I00) and the European Commission through the Horizon 2020 Programme (project ACTRIS IMP, grant agreement no. 871115; ATMO-ACCESS, grant agreement no. 101008004; GRASP-ACE, grant agreement no. 778349) and through the Horizon Europe Programme (project REALISTIC, grant agreement no. 101086690)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A straightforward atmospheric-radar simulator for vertical-air-motion analysis from frequency-modulated continuous-wave-radar rain measurements

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • García García, Alicia
  • Lolli, Simone
  • Tanamachi, Robin
  • Frasier, Stephen J.
This research is part of the projects PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación / Agencia Estatal de Investigación /10.13039/501100011033/FEDER "Una manera de hacer Europa" and part of the PRIN 2022 PNRR, Project P20224AT3W funded by Ministerio dell'Università e della Ricerca". The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004). The MIRSL contributed the mobile S-band radar. MIRSL and EAPS collected and provided the UMASS FMCW data under their respective VORTEX-SE NOAA grants (NA18OAR4590313)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Understanding the impact of turbulence on floating lidar measurements

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Peña Diaz, Alfredo
  • Mann, Jakob
  • Lolli, Simone
Retrieving accurate turbulence intensity from motion-corrupted floating lidar measurements is one of the main challenges of the offshore wind energy industry today. Toward overcoming this challenge, this work describes a method to retrieve the motion-corrected turbulence intensity from floating lidar measurements. The method relies on an atmospheric turbulence model combined with lidar-based flow characteristics estimates. The method simulates floating-lidar and anemometer-like measurements via synthetically-generated wind fields in turbulence boxes. We highlight the importance of accurate modeling of turbulence-box parameters to virtually eliminate motion-induced error. The proposed method was successfully tested over a 3-month campaign at IJmuiden by comparing floating-lidar turbulence measurements against those from measurements from a reference meteorological mast., This work was supported in part by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa” under Project PID2021-126436OB-C21, in part by the PRIN 2022 PNRR, in part by the Ministero dell’Università e della Ricerca under Project P20224AT3W, and in part by the European Commission Collaboration under Project H2020 ATMOACCESS (GA-101008004) and Project H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the use of wind profiles to assess surface boundary-layer parameters

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Salcedo Bosch, Andreu
  • Peña Diaz, Alfredo
Wind profiles measured at the research platform FINO1 are used to retrieve surface boundary-layer parameters, namely, the friction velocity, heat flux, and Obukhov length. The latter is used to assess atmospheric stability. Two different retrieval algorithms, the 2D parametric solver [1] and the Hybrid-Wind method [2], are compared with reference to sonic-anemometers retrievals. Regarding atmospheric stability classification, the 2D algorithm provided better performance than the Hybrid-Wind method. When comparing the 2D-estimated (HW-estimated) friction velocity to the anemometers’ reference, a determination coefficient of ρ 2 = 0.70 (ρ 2 = 0.00) were obtained., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRISIMP (GA-871115). Data was made available by the FINO (Forschungsplattformen in Nord- und Ostsee) initiative, which was funded by the German Federal Ministry of Economic Affairs and Climate Action (BMWK) on the basis of a decision by the German Bundestag, organised by the Projekttraeger Juelich (PTJ) and coordinated by the German Federal Maritime and Hydrographic Agency (BSH)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quality control of Doppler spectra from a vertically pointing, S-band profiling radar

  • Belak, Susan L.
  • Tanamachi, Robin
  • Asel, Matthew L.
  • Dennany, Grant
  • Gnanasambandam, Abhiram
  • Frasier, Steve
  • Rocadenbosch Burillo, Francisco
This study describes a novel combination of methods to remove spurious spectral peaks, or “spurs,” from Doppler spectra produced by a vertically pointing, S-band radar. The University of Massachusetts S-band frequency-modulated, continuous-wave radar (UMass FMCW) was deployed to monitor the growth of the CBL over northern Alabama during the VORTEX–Southeast field campaign in 2016. The Doppler spectra contained spurs caused by high-voltage switching power supplies in the traveling wave tube amplifier. In the original data processing scheme for this radar, a median filtering method was used to eliminate most of the spurs, but the largest ones persisted, which significantly degraded the quality of derived radar moments (e.g., reflectivity, Doppler velocity, and spectrum width) and hindered further analysis of these data (e.g., hydrometeor classification and boundary layer height tracking). Our technique for removing the spurs consists of three steps: (i) a Laplacian filter identifies and masks peaks in the spectra that are characteristic of the spurs in shape and amplitude, (ii) an in-painting method then fills in the masked area based on surrounding data, and (iii) the moments data (e.g., reflectivity, Doppler velocity, and spectrum width) are then recomputed using a coherent power technique. This combination of techniques was more effective than the median filter at removing the largest spurs from the Doppler spectra, and preserved more of the underlying Doppler spectral structure of the scatterers. Performance of both the median-filter and the in-painting methods are assessed through statistical analysis of the spectral power differences. Downstream products, such as boundary layer height detection, are more easily derived from the recomputed moments., This work was funded by NOAA grants NA18OAR4590313 and NA19OAR4590209. Dr. Stanley H. Chan and Dr. Andrew Pazmany advised us on the in-painting and CP techniques, respectively. The statements, findings, conclusions, and recommendations are those of the authors and do not necessarily reflect the views of the NOAA or the U.S. Department of Commerce. Dr. Rocadenbosch contributed the CBL detection algorithm via project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 and EU project H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the performance of the unscented Kalman filter for floating Doppler wind lidar motion correction in an open-sea scenario

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
This work analyzes the influence of open-sea wave motion on the performance of the floating Doppler wind lidar motion-compensation method [1], recently published by the authors. The method is applied to a floating ZephIR 300 LiDAR and compared to a fixed LiDAR as a reference. The motion-correction results are studied as a function of the wave-motion intensity by clustering the IJmuiden experimental campaign into three categories: low, medium, and high motion., This research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigacion (MCIN)/ Agencia Estatal de Investigacion (AEI)/ 10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fresh volcanic aerosols injected in the atmosphere during the volcano eruptive activity at the Cumbre Vieja area (La Palma, Canary Islands): Temporal evolution and vertical impact

  • Cordoba Jabonero, Carmen
  • Sicard, Michaël
  • Barreto Velasco, África
  • Toledano, Carlos
  • López Cayuela, María Ángeles
  • Comerón Tejero, Adolfo
  • García Rodríguez, Omaira
  • Carvajal Pérez, Clara Violeta
  • Gil Díaz, Cristina
  • Ramos López, Ramón
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
For the first time in fifty years, the Cumbre Vieja volcanic area (La Palma, Canary Islands, Spain) erupted on September 19, 2021, giving birth to a new volcano. Fresh volcanic aerosols were continuously injected into the troposphere at different height levels, decreasing with time until the end of December 2021 (15 weeks duration). A wide set of different instrumentation was deployed all over the Island in order to evaluate the effects of the volcanic plumes on the atmosphere and the air quality. For the first time, a long-term study of the relative mass contribution and vertical impact of the volcanic components, ash and non-ash particles separately, during the eruptive activity was carried out in this work. In particular, a polarized Micro-Pulse Lidar (P-MPL) was deployed at Tazacorte (at around 8 km west from the volcano) in 24/7 operation from October 17, 2021 until the end of the volcano activity (11 weeks) for vertical monitoring of the volcanic particles. First, a statistical study of the mass conversion factors for mass concentration estimation of the volcanic (ash and non-ash) particles was performed by using the AERONET sun/sky-photometer dataset at Fuencaliente (at around 18 km south from the volcano). A representative mass conversion factor was obtained for ash and non-ash particles: 1.89 ± 0.53 and 0.31 ± 0.06 g m-2, respectively, with no dependence on time and optical depth. Second, these factors were used to calculate the ash and non-ash mass concentrations from P-MPL observations. Ash particles dominated 11% of the time and mostly until week 3 (i.e. week 7 from the volcanic eruption). Their mass concentration decreased by one order of magnitude: the relative ash mass contribution was 73 ± 18% with a total mass loading of 566 ± 281 mg m-2 at week 1, reducing gradually down to 38 ± 32% and 120 ± 49 mg m-2, respectively, at week 11. Layer-to-layer, it decreased with increasing layer-height; no ash was detected above 4 km at the end of the volcanic period. Third, in order to analyse the potential AERONET underestimation of the coarse mass conversion factor due to the 15 µm cutoff effect in the AERONET retrieval, two worst-case-scenarios (WCS) were examined, representing aged-like ash particles (WCS1, 4-µm radius) and fresh-like (WCS2, 10-µm radius). For both scenarios, the mass concentration of the volcanic plumes exceeded the first contamination level (>200 µg m-3, as defined by the UK Meteorological Office) up to 5–6 km height mostly during week 1 and up to 1–2 km until week 9. The extreme contamination level (>2000 µg m-3, aircraft flight limitations) was only exceeded from week 1 to week 6 under WCS2 conditions. This work infers a new long-term insight on the volcanic matter injected in the atmosphere with relevance for Air Quality issues and air traffic safety policies., This research was funded by the Spanish Ministry of Science and Innovation (PID2020- 118793GA-I00, PID2019-104205GB-C21/AEI/10.13039/501100011 033, PID2019-103886RB-I00, and EQC2018-004686-P) and the Unit of Excellence “María de Maeztu” (MDM-2017-0737) and ACTRIS-Spain (CGL2017-90884-REDT) by the Spanish State Research Agency (AEI). The authors wish to thank the support from the H2020 program of the European Union and ACTRIS (GA n. 19ENV04, 654109, 778349, 871115, 101008004, and 101086690), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Floating lidar assessment of atmospheric stability in the North Sea

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu
  • González Marco, Daniel
  • Peña Diaz, Alfredo
In this work, the 2D parametric-solver algorithm [1] used to assess atmospheric stability from floating Doppler wind lidar (FDWL) measurements is revisited. The algorithm performance is studied using data from IJmuiden campaign. Mast-measured temperature and wind-speed provided the reference parameters used to evaluate the performance of the stability estimation algorithm. From 5,922 10-min samples available, the algorithm classified the atmosphere as stable (52% of the cases), neutral (31%) and unstable (17%), which successfully agreed with the mast-derived reference classification (53%, 30% and 17%, respectively)., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Retrieval of planetary boundary layer height from CALIPSO satellite observations using a machine learning approach

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Argañaraz, Carina Inés
  • Curci, Gabriele
  • Lolli, Simone
The planetary boundary layer height (PBLH) is a key variable in air quality, climate modeling, and weather prediction. Traditional retrieval methods, such as radiosondes, provide high accuracy but lack spatial coverage. This study presents a Random Forest (RF) model based on Machine Learning (ML) to estimate PBLH from ten years of Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO), using radiosonde measurements as a reference. The model achieves an R2 of 0.67 and an RMSE of 278.02 m with a spatial resolution of ˜ 20 × 20 km2 in a test set that covers mainly Europe and North America. Unlike previous methods, our approach does not require atmospheric typing and uses minimal data filtering, demonstrating robustness under diverse aerosol and cloud conditions. Although validation is currently limited to mid-latitude regions, the method offers a scalable approach to global monitoring and supports the management of climate and air quality. Future work will extend the validation to other geographic zones and explore deep learning models for further improvements., The authors acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on 14.9.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title PBLhsat CUP P20224AT3 W Grant Assignment Decree No. 965 adopted on 30 June 2023 by the Italian Ministry of University and Research (MUR) and the research is part of the project PID2021-126436OB-C21 funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033 y FEDER ‘‘Una manera de hacer Europa’’. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA871115)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of the accuracy of the aerosol optical and microphysical retrievals by the GRASP algorithm from combined measurements of a polarized sun-sky-lunar photometer and a three-wavelength elastic lidar

  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Sicard, Michaël
  • Rodríguez Gómez, Alejandro Antonio
  • Comerón Tejero, Adolfo
  • Muñoz Porcar, Constantino
  • Gil Díaz, Cristina
  • Lolli, Simone
  • Dubovik, Oleg
  • Lopatin, Anton
  • Herrera, Milagros Estefania
  • Herreras Giralda, Marcos
The versatile Generalized Retrieval of Aerosol and Surface Properties (GRASP) algorithm exploits the advantages of synergic ground-based aerosol observations such as radiometric (sensitive to columnar aerosol optical and microphysical properties) and lidar (sensitive to vertical distribution of the optical properties) observations. The synergy is possible when the complementary data is mutually constrained by GRASP parametrization that includes, for the first time ever, the degree of linear polarization (DoLP) parameter measured by a polarized sun-sky-lunar AERONET photometer (380, 440, 500, 675, 870, 1020, and 1640 nm) in synergy with the vertical profiles from an elastic lidar (355, 532, and 1064 nm). First, a series of numerical tests is performed using simulated data generated using a climatology of data and ground-based measurements. The inversions are performed with and without random noise for five different combinations of input data, starting from the AERONET-like dataset and increasing to the complex one by adding more information for three aerosol scenarios: I—high aerosol optical depth (AOD) with dominant coarse mode; II—low AOD with dominant coarse mode; III—high AOD with dominant fine mode. The inclusion of DoLP improves (i) the retrieval accuracy of the fine-mode properties when it is not dominant; (ii) the retrieval accuracy of the coarse-mode properties at longer wavelengths and that of the fine-mode properties at shorter wavelengths; (iii) the retrieval accuracy of the coarse-mode real part of the refractive index (up to 36% reduction), but has no effect on the retrieval of the imaginary part; (iv) reduces up to 83% the bias of the sphere fraction (SF) retrieval in coarse-mode dominated regimes; and (v) the root mean square error (RMSE) of the retrieval for most of the parameters in all scenarios. In addition, the addition of more photometer channels in synergy with a three-wavelength elastic lidar reduces the RMSE for the real part (67% in the coarse mode) and the imaginary part (35% in the fine mode) of the refractive index, the single scattering albedo (38% in the fine mode), the lidar ratio (20% in the coarse mode), and the SF (43%)., Funding: This research was funded by: the Spanish Ministry of Science and Innovation (grant no. PID2019-103886RB-I00); H2020 (grant nos. 654109, 778349, 871115 and 101008004); and Horizon Europe REALISTIC project (grant no. 101086690)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A unified formulation for the computation of the six-degrees-of-freedom-motion-induced errors in floating Doppler wind LiDARs

  • Salcedo Bosch, Andreu
  • Farré Guarné, Joan
  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
This work presents an analytical formulation to assess the six-degrees-of-freedom-motion-induced error in floating Doppler wind LiDARs (FDWLs). The error products derive from the horizontal wind speed bias and apparent turbulence intensity. Departing from a geometrical formulation of the FDWL attitude and of the LiDAR retrieval algorithm, the contributions of the rotational and translational motion to the FDWL-measured total error are computed. Central to this process is the interpretation of the velocity–azimuth display retrieval algorithm in terms of a first-order Fourier series. The obtained 6 DoF formulation is validated numerically by means of a floating LiDAR motion simulator and experimentally in nearshore and open-sea scenarios in the framework of the Pont del Petroli and IJmuiden campaigns, respectively. Both measurement campaigns involved a fixed and a floating ZephIRTM 300 LiDAR. The proposed formulation proved capable of estimating the motion-induced FDWL horizontal wind speed bias and returned similar percentiles when comparing the FDWL with the fixed LiDAR. The estimations of the turbulence intensity increment statistically matched the FDWL measurements under all motional and wind scenarios when clustering the data as a function of the buoy’s mean tilt amplitude, mean translational-velocity amplitude, and mean horizontal wind speed., This research project was part of the project PID2021-126436OB-C21 funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 y FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The work of M.P Araújo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ATMO-ACCESS (GA-101008004) and H2020 ACTRIS-IMP (GA-871115)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Use of pure rotational Raman channels for lidar measurement of aerosol extinction coefficient: the EARLINET/ACTRIS Barcelona station experience

  • Rodríguez Gómez, Alejandro Antonio
  • Muñoz Porcar, Constantino
  • Zenteno Hernández, José Alex
  • Comerón Tejero, Adolfo
  • Dios Otín, Víctor Federico
  • Sicard, Michaël
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Mandal, Charly
Advances in interference filter technology permit currently using selected parts of the N2 and O2 pure rotational Raman spectra with very low temperature sensitivity, while rejecting sufficiently the elastic return. The Raman technique to retrieve the aerosol extinction coefficient can then be used with higher signal-to-noise ratios, because of a higher (about 8 times) effective differential backscatter cross-section as compared to the cross-section of the N2 vibro-rotational spectra. The design and results of pure rotational Raman channels at 354 nm and 530 nm allowing daytime aerosol extinction measurements implemented at the EARLINET/ACTRIS Barcelona lidar station are presented and discussed. © 2022 SPIE., The authors acknowledge the funding of this research by the Spanish Ministry for Science and Innovation for the project PID2019-103886RB-I00 and its support to ACTRIS ERIC. The authors also acknowledge the support of the European Commission through the Horizon 2020 Research and Innovation Framework Programme projects ACTRIS IMP (grant agreement No 871115) and ATMO-ACCESS (grant agreement No 101008004), Peer Reviewed, Postprint (published version)